##// END OF EJS Templates
context: write dirstate out explicitly after marking files as clean...
context: write dirstate out explicitly after marking files as clean To detect change of a file without redundant comparison of file content, dirstate recognizes a file as certainly clean, if: (1) it is already known as "normal", (2) dirstate entry for it has valid (= not "-1") timestamp, and (3) mode, size and timestamp of it on the filesystem are as same as ones expected in dirstate This works as expected in many cases, but doesn't in the corner case that changing a file keeps mode, size and timestamp of it on the filesystem. The timetable below shows steps in one of typical such situations: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' N N - 'hg status' shows "f" as "clean" N N N ---- ----------------------------------- ---- ----- ----- The most important point is that 'dirstate.write()' is executed at N+1 or later. This causes writing dirstate timestamp N of "f" out successfully. If it is executed at N, 'parsers.pack_dirstate()' replaces timestamp N with "-1" before actual writing dirstate out. Occasional test failure for unexpected file status is typical example of this corner case. Batch execution with small working directory is finished in no time, and rarely satisfies condition (2) above. This issue can occur in cases below; - 'hg revert --rev REV' for revisions other than the parent - failure of 'merge.update()' before 'merge.recordupdates()' The root cause of this issue is that files are changed without flushing in-memory dirstate changes via 'repo.commit()' (even though omitting 'dirstate.normallookup()' on changed files also causes this issue). To detect changes of files correctly, this patch writes in-memory dirstate changes out explicitly after marking files as clean in 'workingctx._checklookup()', which is invoked via 'repo.status()'. After this change, timetable is changed as below: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) ----------------------------------- ---- ----- ----- - 'dirsttate.write()' -1 -1 ----------------------------------- ---- ----- ----- - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' -1 -1 - 'hg status' -1 -1 N ---- ----------------------------------- ---- ----- ----- To reproduce this issue in tests certainly, this patch emulates some timing critical actions as below: - timestamp of "f" in '.hg/dirstate' is -1 at the beginning 'hg debugrebuildstate' before command invocation ensures it. - make file "f" clean at N - change "f" at N 'touch -t 200001010000' before and after command invocation changes mtime of "f" to "2000-01-01 00:00" (= N). - invoke 'dirstate.write()' via 'repo.status()' at N 'fakedirstatewritetime.py' forces 'pack_dirstate()' to use "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked via 'workingctx._checklookup()'. - invoke 'dirstate.write()' via releasing wlock at N+1 (or "not at N") 'pack_dirstate()' via releasing wlock uses actual timestamp at runtime as "now", and it should be different from the "2000-01-01 00:00" of "f". BTW, this patch also changes 'test-largefiles-misc.t', because adding 'dirstate.write()' makes recent dirstate changes visible to external process.

File last commit:

r25513:0c6f9839 default
r25753:fe03f522 default
Show More
formatter.py
204 lines | 6.5 KiB | text/x-python | PythonLexer
# formatter.py - generic output formatting for mercurial
#
# Copyright 2012 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
import cPickle
from node import hex, short
from i18n import _
import encoding, util
import templater
import os
class baseformatter(object):
def __init__(self, ui, topic, opts):
self._ui = ui
self._topic = topic
self._style = opts.get("style")
self._template = opts.get("template")
self._item = None
# function to convert node to string suitable for this output
self.hexfunc = hex
def __nonzero__(self):
'''return False if we're not doing real templating so we can
skip extra work'''
return True
def _showitem(self):
'''show a formatted item once all data is collected'''
pass
def startitem(self):
'''begin an item in the format list'''
if self._item is not None:
self._showitem()
self._item = {}
def data(self, **data):
'''insert data into item that's not shown in default output'''
self._item.update(data)
def write(self, fields, deftext, *fielddata, **opts):
'''do default text output while assigning data to item'''
for k, v in zip(fields.split(), fielddata):
self._item[k] = v
def condwrite(self, cond, fields, deftext, *fielddata, **opts):
'''do conditional write (primarily for plain formatter)'''
for k, v in zip(fields.split(), fielddata):
self._item[k] = v
def plain(self, text, **opts):
'''show raw text for non-templated mode'''
pass
def end(self):
'''end output for the formatter'''
if self._item is not None:
self._showitem()
class plainformatter(baseformatter):
'''the default text output scheme'''
def __init__(self, ui, topic, opts):
baseformatter.__init__(self, ui, topic, opts)
if ui.debugflag:
self.hexfunc = hex
else:
self.hexfunc = short
def __nonzero__(self):
return False
def startitem(self):
pass
def data(self, **data):
pass
def write(self, fields, deftext, *fielddata, **opts):
self._ui.write(deftext % fielddata, **opts)
def condwrite(self, cond, fields, deftext, *fielddata, **opts):
'''do conditional write'''
if cond:
self._ui.write(deftext % fielddata, **opts)
def plain(self, text, **opts):
self._ui.write(text, **opts)
def end(self):
pass
class debugformatter(baseformatter):
def __init__(self, ui, topic, opts):
baseformatter.__init__(self, ui, topic, opts)
self._ui.write("%s = [\n" % self._topic)
def _showitem(self):
self._ui.write(" " + repr(self._item) + ",\n")
def end(self):
baseformatter.end(self)
self._ui.write("]\n")
class pickleformatter(baseformatter):
def __init__(self, ui, topic, opts):
baseformatter.__init__(self, ui, topic, opts)
self._data = []
def _showitem(self):
self._data.append(self._item)
def end(self):
baseformatter.end(self)
self._ui.write(cPickle.dumps(self._data))
def _jsonifyobj(v):
if isinstance(v, tuple):
return '[' + ', '.join(_jsonifyobj(e) for e in v) + ']'
elif v is None:
return 'null'
elif v is True:
return 'true'
elif v is False:
return 'false'
elif isinstance(v, (int, float)):
return str(v)
else:
return '"%s"' % encoding.jsonescape(v)
class jsonformatter(baseformatter):
def __init__(self, ui, topic, opts):
baseformatter.__init__(self, ui, topic, opts)
self._ui.write("[")
self._ui._first = True
def _showitem(self):
if self._ui._first:
self._ui._first = False
else:
self._ui.write(",")
self._ui.write("\n {\n")
first = True
for k, v in sorted(self._item.items()):
if first:
first = False
else:
self._ui.write(",\n")
self._ui.write(' "%s": %s' % (k, _jsonifyobj(v)))
self._ui.write("\n }")
def end(self):
baseformatter.end(self)
self._ui.write("\n]\n")
class templateformatter(baseformatter):
def __init__(self, ui, topic, opts):
baseformatter.__init__(self, ui, topic, opts)
self._topic = topic
self._t = gettemplater(ui, topic, opts.get('template', ''))
def _showitem(self):
g = self._t(self._topic, **self._item)
self._ui.write(templater.stringify(g))
def lookuptemplate(ui, topic, tmpl):
# looks like a literal template?
if '{' in tmpl:
return tmpl, None
# perhaps a stock style?
if not os.path.split(tmpl)[0]:
mapname = (templater.templatepath('map-cmdline.' + tmpl)
or templater.templatepath(tmpl))
if mapname and os.path.isfile(mapname):
return None, mapname
# perhaps it's a reference to [templates]
t = ui.config('templates', tmpl)
if t:
try:
tmpl = templater.unquotestring(t)
except SyntaxError:
tmpl = t
return tmpl, None
if tmpl == 'list':
ui.write(_("available styles: %s\n") % templater.stylelist())
raise util.Abort(_("specify a template"))
# perhaps it's a path to a map or a template
if ('/' in tmpl or '\\' in tmpl) and os.path.isfile(tmpl):
# is it a mapfile for a style?
if os.path.basename(tmpl).startswith("map-"):
return None, os.path.realpath(tmpl)
tmpl = open(tmpl).read()
return tmpl, None
# constant string?
return tmpl, None
def gettemplater(ui, topic, spec):
tmpl, mapfile = lookuptemplate(ui, topic, spec)
t = templater.templater(mapfile, {})
if tmpl:
t.cache[topic] = tmpl
return t
def formatter(ui, topic, opts):
template = opts.get("template", "")
if template == "json":
return jsonformatter(ui, topic, opts)
elif template == "pickle":
return pickleformatter(ui, topic, opts)
elif template == "debug":
return debugformatter(ui, topic, opts)
elif template != "":
return templateformatter(ui, topic, opts)
elif ui.configbool('ui', 'formatdebug'):
return debugformatter(ui, topic, opts)
elif ui.configbool('ui', 'formatjson'):
return jsonformatter(ui, topic, opts)
return plainformatter(ui, topic, opts)