##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

context: write dirstate out explicitly after marking files as clean...
context: write dirstate out explicitly after marking files as clean To detect change of a file without redundant comparison of file content, dirstate recognizes a file as certainly clean, if: (1) it is already known as "normal", (2) dirstate entry for it has valid (= not "-1") timestamp, and (3) mode, size and timestamp of it on the filesystem are as same as ones expected in dirstate This works as expected in many cases, but doesn't in the corner case that changing a file keeps mode, size and timestamp of it on the filesystem. The timetable below shows steps in one of typical such situations: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' N N - 'hg status' shows "f" as "clean" N N N ---- ----------------------------------- ---- ----- ----- The most important point is that 'dirstate.write()' is executed at N+1 or later. This causes writing dirstate timestamp N of "f" out successfully. If it is executed at N, 'parsers.pack_dirstate()' replaces timestamp N with "-1" before actual writing dirstate out. Occasional test failure for unexpected file status is typical example of this corner case. Batch execution with small working directory is finished in no time, and rarely satisfies condition (2) above. This issue can occur in cases below; - 'hg revert --rev REV' for revisions other than the parent - failure of 'merge.update()' before 'merge.recordupdates()' The root cause of this issue is that files are changed without flushing in-memory dirstate changes via 'repo.commit()' (even though omitting 'dirstate.normallookup()' on changed files also causes this issue). To detect changes of files correctly, this patch writes in-memory dirstate changes out explicitly after marking files as clean in 'workingctx._checklookup()', which is invoked via 'repo.status()'. After this change, timetable is changed as below: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) ----------------------------------- ---- ----- ----- - 'dirsttate.write()' -1 -1 ----------------------------------- ---- ----- ----- - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' -1 -1 - 'hg status' -1 -1 N ---- ----------------------------------- ---- ----- ----- To reproduce this issue in tests certainly, this patch emulates some timing critical actions as below: - timestamp of "f" in '.hg/dirstate' is -1 at the beginning 'hg debugrebuildstate' before command invocation ensures it. - make file "f" clean at N - change "f" at N 'touch -t 200001010000' before and after command invocation changes mtime of "f" to "2000-01-01 00:00" (= N). - invoke 'dirstate.write()' via 'repo.status()' at N 'fakedirstatewritetime.py' forces 'pack_dirstate()' to use "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked via 'workingctx._checklookup()'. - invoke 'dirstate.write()' via releasing wlock at N+1 (or "not at N") 'pack_dirstate()' via releasing wlock uses actual timestamp at runtime as "now", and it should be different from the "2000-01-01 00:00" of "f". BTW, this patch also changes 'test-largefiles-misc.t', because adding 'dirstate.write()' makes recent dirstate changes visible to external process.
FUJIWARA Katsunori - - Load All Authors

File last commit:

r25753:fe03f522 default
r25753:fe03f522 default
Show More
test-merge1.t
296 lines | 6.5 KiB | text/troff | Tads3Lexer
/ tests / test-merge1.t
History | Annotation | Raw |Copy content |Copy permalink
$ cat <<EOF > merge
> import sys, os
>
> try:
> import msvcrt
> msvcrt.setmode(sys.stdout.fileno(), os.O_BINARY)
> msvcrt.setmode(sys.stderr.fileno(), os.O_BINARY)
> except ImportError:
> pass
>
> print "merging for", os.path.basename(sys.argv[1])
> EOF
$ HGMERGE="python ../merge"; export HGMERGE
$ hg init t
$ cd t
$ echo This is file a1 > a
$ hg add a
$ hg commit -m "commit #0"
$ echo This is file b1 > b
$ hg add b
$ hg commit -m "commit #1"
$ hg update 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
Test interrupted updates by exploiting our non-handling of directory collisions
$ mkdir b
$ hg up
abort: *: '$TESTTMP/t/b' (glob)
[255]
$ hg ci
abort: last update was interrupted
(use 'hg update' to get a consistent checkout)
[255]
$ hg sum
parent: 0:538afb845929
commit #0
branch: default
commit: (interrupted update)
update: 1 new changesets (update)
phases: 2 draft
$ rmdir b
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg sum
parent: 1:b8bb4a988f25 tip
commit #1
branch: default
commit: (clean)
update: (current)
phases: 2 draft
Prepare a basic merge
$ hg up 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo This is file c1 > c
$ hg add c
$ hg commit -m "commit #2"
created new head
$ echo This is file b1 > b
no merges expected
$ hg merge -P 1
changeset: 1:b8bb4a988f25
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: commit #1
$ hg merge 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg diff --nodates
diff -r 49035e18a8e6 b
--- /dev/null
+++ b/b
@@ -0,0 +1,1 @@
+This is file b1
$ hg status
M b
$ cd ..; rm -r t
$ hg init t
$ cd t
$ echo This is file a1 > a
$ hg add a
$ hg commit -m "commit #0"
$ echo This is file b1 > b
$ hg add b
$ hg commit -m "commit #1"
$ hg update 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo This is file c1 > c
$ hg add c
$ hg commit -m "commit #2"
created new head
$ echo This is file b2 > b
merge should fail
$ hg merge 1
b: untracked file differs
abort: untracked files in working directory differ from files in requested revision
[255]
merge of b expected
$ hg merge -f 1
merging b
merging for b
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg diff --nodates
diff -r 49035e18a8e6 b
--- /dev/null
+++ b/b
@@ -0,0 +1,1 @@
+This is file b2
$ hg status
M b
$ cd ..; rm -r t
$ hg init t
$ cd t
$ echo This is file a1 > a
$ hg add a
$ hg commit -m "commit #0"
$ echo This is file b1 > b
$ hg add b
$ hg commit -m "commit #1"
$ echo This is file b22 > b
$ hg commit -m "commit #2"
$ hg update 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo This is file c1 > c
$ hg add c
$ hg commit -m "commit #3"
created new head
Contents of b should be "this is file b1"
$ cat b
This is file b1
$ echo This is file b22 > b
merge fails
$ hg merge 2
abort: uncommitted changes
(use 'hg status' to list changes)
[255]
merge expected!
$ hg merge -f 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg diff --nodates
diff -r 85de557015a8 b
--- a/b
+++ b/b
@@ -1,1 +1,1 @@
-This is file b1
+This is file b22
$ hg status
M b
$ cd ..; rm -r t
$ hg init t
$ cd t
$ echo This is file a1 > a
$ hg add a
$ hg commit -m "commit #0"
$ echo This is file b1 > b
$ hg add b
$ hg commit -m "commit #1"
$ echo This is file b22 > b
$ hg commit -m "commit #2"
$ hg update 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo This is file c1 > c
$ hg add c
$ hg commit -m "commit #3"
created new head
$ echo This is file b33 > b
merge of b should fail
$ hg merge 2
abort: uncommitted changes
(use 'hg status' to list changes)
[255]
merge of b expected
$ hg merge -f 2
merging b
merging for b
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg diff --nodates
diff -r 85de557015a8 b
--- a/b
+++ b/b
@@ -1,1 +1,1 @@
-This is file b1
+This is file b33
$ hg status
M b
Test for issue2364
$ hg up -qC .
$ hg rm b
$ hg ci -md
$ hg revert -r -2 b
$ hg up -q -- -2
Test that updated files are treated as "modified", when
'merge.update()' is aborted before 'merge.recordupdates()' (= parents
aren't changed), even if none of mode, size and timestamp of them
isn't changed on the filesystem (see also issue4583).
$ cat > $TESTTMP/abort.py <<EOF
> # emulate aborting before "recordupdates()". in this case, files
> # are changed without updating dirstate
> from mercurial import extensions, merge, util
> def applyupdates(orig, *args, **kwargs):
> orig(*args, **kwargs)
> raise util.Abort('intentional aborting')
> def extsetup(ui):
> extensions.wrapfunction(merge, "applyupdates", applyupdates)
> EOF
$ cat >> .hg/hgrc <<EOF
> [fakedirstatewritetime]
> # emulate invoking dirstate.write() via repo.status()
> # at 2000-01-01 00:00
> fakenow = 200001010000
> EOF
(file gotten from other revision)
$ hg update -q -C 2
$ echo 'THIS IS FILE B5' > b
$ hg commit -m 'commit #5'
$ hg update -q -C 3
$ cat b
This is file b1
$ touch -t 200001010000 b
$ hg debugrebuildstate
$ cat >> .hg/hgrc <<EOF
> [extensions]
> fakedirstatewritetime = $TESTDIR/fakedirstatewritetime.py
> abort = $TESTTMP/abort.py
> EOF
$ hg merge 5
abort: intentional aborting
[255]
$ cat >> .hg/hgrc <<EOF
> [extensions]
> fakedirstatewritetime = !
> abort = !
> EOF
$ cat b
THIS IS FILE B5
$ touch -t 200001010000 b
$ hg status -A b
M b
(file merged from other revision)
$ hg update -q -C 3
$ echo 'this is file b6' > b
$ hg commit -m 'commit #6'
created new head
$ cat b
this is file b6
$ touch -t 200001010000 b
$ hg debugrebuildstate
$ cat >> .hg/hgrc <<EOF
> [extensions]
> fakedirstatewritetime = $TESTDIR/fakedirstatewritetime.py
> abort = $TESTTMP/abort.py
> EOF
$ hg merge --tool internal:other 5
abort: intentional aborting
[255]
$ cat >> .hg/hgrc <<EOF
> [extensions]
> fakedirstatewritetime = !
> abort = !
> EOF
$ cat b
THIS IS FILE B5
$ touch -t 200001010000 b
$ hg status -A b
M b
$ cd ..