#require serve zstd Client version is embedded in HTTP request and is effectively dynamic. Pin the version so behavior is deterministic. $ cat > fakeversion.py << EOF > from mercurial import util > util.version = lambda: b'4.2' > EOF $ cat >> $HGRCPATH << EOF > [extensions] > fakeversion = `pwd`/fakeversion.py > [format] > sparse-revlog = no > use-persistent-nodemap = no > [devel] > legacy.exchange = phases > [server] > concurrent-push-mode = strict > EOF $ hg init server0 $ cd server0 $ touch foo $ hg -q commit -A -m initial Also disable compression because zstd is optional and causes output to vary and because debugging partial responses is hard when compression is involved $ cat > .hg/hgrc << EOF > [extensions] > badserver = $TESTDIR/testlib/badserverext.py > [server] > compressionengines = none > EOF Failure to accept() socket should result in connection related error message ---------------------------------------------------------------------------- $ hg serve --config badserver.close-before-accept=true -p $HGPORT -d --pid-file=hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: (\$ECONNRESET\$|\$EADDRNOTAVAIL\$|\$ECONNREFUSED\$) (re) [100] (The server exits on its own, but there is a race between that and starting a new server. So ensure the process is dead.) $ killdaemons.py $DAEMON_PIDS Failure immediately after accept() should yield connection related error message -------------------------------------------------------------------------------- $ hg serve --config badserver.close-after-accept=true -p $HGPORT -d --pid-file=hg.pid $ cat hg.pid > $DAEMON_PIDS TODO: this usually outputs good results, but sometimes emits abort: error: '' on FreeBSD and OS X. What we ideally want are: abort: error: $ECONNRESET$ The flakiness in this output was observable easily with --runs-per-test=20 on macOS 10.12 during the freeze for 4.2. $ hg clone http://localhost:$HGPORT/ clone abort: error: * (glob) [100] $ killdaemons.py $DAEMON_PIDS Failure to read all bytes in initial HTTP request should yield connection related error message ----------------------------------------------------------------------------------------------- $ hg serve --config badserver.close-after-recv-bytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: * (glob) [100] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(1 from ~) -> (1) G read limit reached; closing socket $ rm -f error.log Same failure, but server reads full HTTP request line ----------------------------------------------------- $ hg serve \ > --config badserver.close-after-recv-patterns="GET /\?cmd=capabilities" \ > --config badserver.close-after-recv-bytes=7 \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: * (glob) [100] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(7 from *) -> (7) Accept- (glob) read limit reached; closing socket $ rm -f error.log Failure on subsequent HTTP request on the same socket (cmd?batch) ----------------------------------------------------------------- $ hg serve \ > --config badserver.close-after-recv-patterns="GET /\?cmd=batch,GET /\?cmd=batch" \ > --config badserver.close-after-recv-bytes=15,197 \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: * (glob) [100] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (*) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob) readline(*) -> (1?) Accept-Encoding* (glob) read limit reached; closing socket readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(4 from *) -> (4) host (glob) read limit reached; closing socket $ rm -f error.log Failure to read getbundle HTTP request -------------------------------------- $ hg serve \ > --config badserver.close-after-recv-patterns="GET /\?cmd=batch,user-agent: mercurial/proto-1.0,GET /\?cmd=getbundle" \ > --config badserver.close-after-recv-bytes=110,26,281 \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: error: bad HTTP status line: * (glob) [100] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(1 from -1) -> (1) x (?) readline(1 from -1) -> (1) x (?) readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (*) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob) readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (1?) x-hgproto-1:* (glob) read limit reached; closing socket readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (*) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(159) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: 42\r\n\r\n sendall(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(24 from ~) -> (*) GET /?cmd=getbundle HTTP* (glob) read limit reached; closing socket readline(~) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(281 from *) -> (27) Accept-Encoding: identity\r\n (glob) readline(254 from *) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(225 from *) -> (225) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtag (glob) read limit reached; closing socket $ rm -f error.log Now do a variation using POST to send arguments =============================================== $ hg serve \ > --config badserver.close-after-recv-patterns="x-hgargs-post:,user-agent: mercurial/proto-1.0" \ > --config badserver.close-after-recv-bytes="14,26" \ > --config experimental.httppostargs=true \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: * (glob) [100] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx httppostargs known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (27) POST /?cmd=batch HTTP/1.1\r\n (glob) readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (41) content-type: application/mercurial-0.1\r\n (glob) readline(*) -> (33) vary: X-HgArgs-Post,X-HgProto-1\r\n (glob) readline(*) -> (19) x-hgargs-post: 28\r\n (glob) readline(*) -> (1?) x-hgproto-1: * (glob) read limit reached; closing socket readline(~) -> (27) POST /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (41) content-type: application/mercurial-0.1\r\n (glob) readline(*) -> (33) vary: X-HgArgs-Post,X-HgProto-1\r\n (glob) readline(*) -> (19) x-hgargs-post: 28\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (20) content-length: 28\r\n (glob) readline(*) -> (*) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) read(24 from 28) -> (*) cmds=* (glob) read limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=batch': (glob) Traceback (most recent call last): Exception: connection closed after receiving N bytes $ rm -f error.log Now move on to partial server responses ======================================= Server sends a single character from the HTTP response line ----------------------------------------------------------- $ hg serve --config badserver.close-after-send-bytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: H [100] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(1 from 160) -> (0) H write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=capabilities': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends an incomplete capabilities response body ----------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns='batch branchmap bund' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: HTTP request error (incomplete response; expected * bytes got 20) (glob) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(20 from *) -> (0) batch branchmap bund (glob) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=capabilities': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends incomplete headers for batch request ------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns='(.*Content-Type: applicat){2}' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS TODO this output is horrible $ hg clone http://localhost:$HGPORT/ clone abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository: ---%<--- (applicat) ---%<--- [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(118 from 159) -> (0) HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: applicat write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=batch': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends an incomplete HTTP response body to batch request -------------------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns=96ee1d7354c4ad7372047672 \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: unexpected response: '96ee1d7354c4ad7372047672' [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(159) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: 42\r\n\r\n sendall(24 from 42) -> (0) 96ee1d7354c4ad7372047672 write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=batch': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends incomplete headers for getbundle response ------------------------------------------------------ $ hg serve \ > --config badserver.close-after-send-patterns='(.*Content-Type: application/mercuri){3}' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS TODO this output is terrible $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository: ---%<--- (application/mercuri) ---%<--- [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(159) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: 42\r\n\r\n sendall(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(~) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (447) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(129 from 167) -> (0) HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercuri write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server stops before it sends transfer encoding ---------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns="Transfer-Encoding: chunke" \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: stream ended unexpectedly (got 0 bytes, expected 1) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -6 sendall(162 from 167) -> (0) HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunke write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends empty HTTP body for getbundle ------------------------------------------ $ hg serve \ > --config badserver.close-after-send-patterns='Transfer-Encoding: chunked\r\n\r\n' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(159) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: 42\r\n\r\n sendall(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(~) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (447) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(167 from 167) -> (0) HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends partial compression string --------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns='4\r\nHG20\r\n' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log | "$PYTHON" $TESTDIR/filtertraceback.py readline(~) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(160) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: *\r\n\r\n (glob) sendall(*) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (glob) readline(~) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(159) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.1\r\nContent-Length: 42\r\n\r\n sendall(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(~) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(*) -> (27) Accept-Encoding: identity\r\n (glob) readline(*) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(*) -> (447) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n (glob) readline(*) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n (glob) readline(*) -> (35) accept: application/mercurial-0.1\r\n (glob) readline(*) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(*) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(*) -> (2) \r\n (glob) sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9 from 9) -> (0) 4\r\nHG20\r\n write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends partial bundle2 header magic ----------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns='4\r\nHG2' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response*) (glob) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -9 sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(6 from 9) -> (0) 4\r\nHG2 write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server sends incomplete bundle2 stream params length ---------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns='4\r\n\0\0\0' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response*) (glob) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -10 sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9) -> 4\r\nHG20\r\n sendall(6 from 9) -> (0) 4\\r\\n\x00\x00\x00 (esc) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Servers stops after bundle2 stream params header ------------------------------------------------ $ hg serve \ > --config badserver.close-after-send-patterns='4\r\n\0\0\0\0\r\n' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -10 sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9) -> 4\r\nHG20\r\n sendall(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server stops sending after bundle2 part header length ----------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns='4\r\n\0\0\0\)\r\n' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -11 sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9) -> 4\r\nHG20\r\n sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9 from 9) -> (0) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server stops sending after bundle2 part header ---------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns="version03nbchanges1\\r\\n" \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets transaction abort! rollback completed abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -12 sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9) -> 4\r\nHG20\r\n sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00)\\r\\n (esc) sendall(47 from 47) -> (0) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version03nbchanges1\\r\\n (esc) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server stops after bundle2 part payload chunk size -------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns='1dc\r\n.......' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets transaction abort! rollback completed abort: HTTP request error (incomplete response*) (glob) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -14 sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9) -> 4\r\nHG20\r\n sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00)\\r\\n (esc) sendall(47) -> 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version03nbchanges1\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x01\xdc\\r\\n (esc) sendall(12 from 483) -> (0) 1dc\\r\\n\x00\x00\x00\xb4\x96\xee\x1d (esc) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server stops sending in middle of bundle2 payload chunk ------------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns=':jL\0\0\x00\0\0\0\0\0\0\0\r\n' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets transaction abort! rollback completed abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -14 sendall(167) -> HTTP/1.1 200 Script output follows\r\nServer: badhttpserver\r\nDate: $HTTP_DATE$\r\nContent-Type: application/mercurial-0.2\r\nTransfer-Encoding: chunked\r\n\r\n sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9) -> 4\r\nHG20\r\n sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00)\\r\\n (esc) sendall(47) -> 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version03nbchanges1\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x01\xdc\\r\\n (esc) sendall(483 from 483) -> (0) 1dc\\r\\n\x00\x00\x00\xb4\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa3j=\xf4\xde8\x8f --config badserver.close-after-send-patterns=LISTKEYS \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets adding manifests adding file changes transaction abort! rollback completed abort: HTTP request error (incomplete response*) (glob) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -16 sendall(6) -> 1\\r\\n\x04\\r\\n (esc) sendall(9) -> 4\r\nnone\r\n sendall(9) -> 4\r\nHG20\r\n sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00)\\r\\n (esc) sendall(47) -> 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version03nbchanges1\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x01\xdc\\r\\n (esc) sendall(483) -> 1dc\\r\\n\x00\x00\x00\xb4\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa3j=\xf4\xde8\x8f 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00 \\r\\n (esc) sendall(13 from 38) -> (0) 20\\r\\n\x08LISTKEYS (esc) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log Server stops sending after 0 part bundle part header (indicating end of bundle2 payload) ---------------------------------------------------------------------------------------- This is before the 0 size chunked transfer part that signals end of HTTP response. $ hg serve \ > --config badserver.close-after-send-patterns='(.*4\r\n\0\0\0\0\r\n){5}' \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 96ee1d7354c4 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -20 sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00)\\r\\n (esc) sendall(47) -> 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version03nbchanges1\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x01\xdc\\r\\n (esc) sendall(483) -> 1dc\\r\\n\x00\x00\x00\xb4\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa3j=\xf4\xde8\x8f 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00 \\r\\n (esc) sendall(38) -> 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00 \x06namespacephases\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00:\\r\\n (esc) sendall(64) -> 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c 1\npublishing True\r\n sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00#\\r\\n (esc) sendall(41) -> 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00 namespacebookmarks\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log $ rm -rf clone Server sends a size 0 chunked-transfer size without terminating \r\n -------------------------------------------------------------------- $ hg serve \ > --config badserver.close-after-send-patterns="(.*4\\r\\n\0\0\0\0\\r\\n0\r\n)" \ > -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 96ee1d7354c4 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ killdaemons.py $DAEMON_PIDS $ "$PYTHON" $TESTDIR/filtertraceback.py < error.log | tail -21 sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00)\\r\\n (esc) sendall(47) -> 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version03nbchanges1\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x01\xdc\\r\\n (esc) sendall(483) -> 1dc\\r\\n\x00\x00\x00\xb4\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa3j=\xf4\xde8\x8f 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00 \\r\\n (esc) sendall(38) -> 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00 \x06namespacephases\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00:\\r\\n (esc) sendall(64) -> 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c 1\npublishing True\r\n sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00#\\r\\n (esc) sendall(41) -> 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00 namespacebookmarks\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(9) -> 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) sendall(3 from 5) -> (0) 0\r\n write limit reached; closing socket $LOCALIP - - [$ERRDATE$] Exception happened during processing request '/?cmd=getbundle': (glob) Traceback (most recent call last): Exception: connection closed after sending N bytes $ rm -f error.log $ rm -rf clone