Short help: $ hg Mercurial Distributed SCM basic commands: add add the specified files on the next commit annotate show changeset information by line for each file clone make a copy of an existing repository commit commit the specified files or all outstanding changes diff diff repository (or selected files) export dump the header and diffs for one or more changesets forget forget the specified files on the next commit init create a new repository in the given directory log show revision history of entire repository or files merge merge another revision into working directory pull pull changes from the specified source push push changes to the specified destination remove remove the specified files on the next commit serve start stand-alone webserver status show changed files in the working directory summary summarize working directory state update update working directory (or switch revisions) (use 'hg help' for the full list of commands or 'hg -v' for details) $ hg -q add add the specified files on the next commit annotate show changeset information by line for each file clone make a copy of an existing repository commit commit the specified files or all outstanding changes diff diff repository (or selected files) export dump the header and diffs for one or more changesets forget forget the specified files on the next commit init create a new repository in the given directory log show revision history of entire repository or files merge merge another revision into working directory pull pull changes from the specified source push push changes to the specified destination remove remove the specified files on the next commit serve start stand-alone webserver status show changed files in the working directory summary summarize working directory state update update working directory (or switch revisions) Extra extensions will be printed in help output in a non-reliable order since the extension is unknown. #if no-extraextensions $ hg help Mercurial Distributed SCM list of commands: Repository creation: clone make a copy of an existing repository init create a new repository in the given directory Remote repository management: incoming show new changesets found in source outgoing show changesets not found in the destination paths show aliases for remote repositories pull pull changes from the specified source push push changes to the specified destination serve start stand-alone webserver Change creation: commit commit the specified files or all outstanding changes Change manipulation: backout reverse effect of earlier changeset graft copy changes from other branches onto the current branch merge merge another revision into working directory Change organization: bookmarks create a new bookmark or list existing bookmarks branch set or show the current branch name branches list repository named branches phase set or show the current phase name tag add one or more tags for the current or given revision tags list repository tags File content management: annotate show changeset information by line for each file cat output the current or given revision of files copy mark files as copied for the next commit diff diff repository (or selected files) grep search for a pattern in specified files Change navigation: bisect subdivision search of changesets heads show branch heads identify identify the working directory or specified revision log show revision history of entire repository or files Working directory management: add add the specified files on the next commit addremove add all new files, delete all missing files files list tracked files forget forget the specified files on the next commit remove remove the specified files on the next commit rename rename files; equivalent of copy + remove resolve redo merges or set/view the merge status of files revert restore files to their checkout state root print the root (top) of the current working directory shelve save and set aside changes from the working directory status show changed files in the working directory summary summarize working directory state unshelve restore a shelved change to the working directory update update working directory (or switch revisions) Change import/export: archive create an unversioned archive of a repository revision bundle create a bundle file export dump the header and diffs for one or more changesets import import an ordered set of patches unbundle apply one or more bundle files Repository maintenance: manifest output the current or given revision of the project manifest recover roll back an interrupted transaction verify verify the integrity of the repository Help: config show combined config settings from all hgrc files help show help for a given topic or a help overview version output version and copyright information additional help topics: Mercurial identifiers: filesets Specifying File Sets hgignore Syntax for Mercurial Ignore Files patterns File Name Patterns revisions Specifying Revisions urls URL Paths Mercurial output: color Colorizing Outputs dates Date Formats diffs Diff Formats templating Template Usage Mercurial configuration: config Configuration Files environment Environment Variables extensions Using Additional Features flags Command-line flags hgweb Configuring hgweb merge-tools Merge Tools pager Pager Support Concepts: bundlespec Bundle File Formats glossary Glossary phases Working with Phases subrepos Subrepositories Miscellaneous: deprecated Deprecated Features internals Technical implementation topics scripting Using Mercurial from scripts and automation (use 'hg help -v' to show built-in aliases and global options) $ hg -q help Repository creation: clone make a copy of an existing repository init create a new repository in the given directory Remote repository management: incoming show new changesets found in source outgoing show changesets not found in the destination paths show aliases for remote repositories pull pull changes from the specified source push push changes to the specified destination serve start stand-alone webserver Change creation: commit commit the specified files or all outstanding changes Change manipulation: backout reverse effect of earlier changeset graft copy changes from other branches onto the current branch merge merge another revision into working directory Change organization: bookmarks create a new bookmark or list existing bookmarks branch set or show the current branch name branches list repository named branches phase set or show the current phase name tag add one or more tags for the current or given revision tags list repository tags File content management: annotate show changeset information by line for each file cat output the current or given revision of files copy mark files as copied for the next commit diff diff repository (or selected files) grep search for a pattern in specified files Change navigation: bisect subdivision search of changesets heads show branch heads identify identify the working directory or specified revision log show revision history of entire repository or files Working directory management: add add the specified files on the next commit addremove add all new files, delete all missing files files list tracked files forget forget the specified files on the next commit remove remove the specified files on the next commit rename rename files; equivalent of copy + remove resolve redo merges or set/view the merge status of files revert restore files to their checkout state root print the root (top) of the current working directory shelve save and set aside changes from the working directory status show changed files in the working directory summary summarize working directory state unshelve restore a shelved change to the working directory update update working directory (or switch revisions) Change import/export: archive create an unversioned archive of a repository revision bundle create a bundle file export dump the header and diffs for one or more changesets import import an ordered set of patches unbundle apply one or more bundle files Repository maintenance: manifest output the current or given revision of the project manifest recover roll back an interrupted transaction verify verify the integrity of the repository Help: config show combined config settings from all hgrc files help show help for a given topic or a help overview version output version and copyright information additional help topics: Mercurial identifiers: filesets Specifying File Sets hgignore Syntax for Mercurial Ignore Files patterns File Name Patterns revisions Specifying Revisions urls URL Paths Mercurial output: color Colorizing Outputs dates Date Formats diffs Diff Formats templating Template Usage Mercurial configuration: config Configuration Files environment Environment Variables extensions Using Additional Features flags Command-line flags hgweb Configuring hgweb merge-tools Merge Tools pager Pager Support Concepts: bundlespec Bundle File Formats glossary Glossary phases Working with Phases subrepos Subrepositories Miscellaneous: deprecated Deprecated Features internals Technical implementation topics scripting Using Mercurial from scripts and automation Test extension help: $ hg help extensions --config extensions.rebase= --config extensions.children= Using Additional Features """"""""""""""""""""""""" Mercurial has the ability to add new features through the use of extensions. Extensions may add new commands, add options to existing commands, change the default behavior of commands, or implement hooks. To enable the "foo" extension, either shipped with Mercurial or in the Python search path, create an entry for it in your configuration file, like this: [extensions] foo = You may also specify the full path to an extension: [extensions] myfeature = ~/.hgext/myfeature.py See 'hg help config' for more information on configuration files. Extensions are not loaded by default for a variety of reasons: they can increase startup overhead; they may be meant for advanced usage only; they may provide potentially dangerous abilities (such as letting you destroy or modify history); they might not be ready for prime time; or they may alter some usual behaviors of stock Mercurial. It is thus up to the user to activate extensions as needed. To explicitly disable an extension enabled in a configuration file of broader scope, prepend its path with !: [extensions] # disabling extension bar residing in /path/to/extension/bar.py bar = !/path/to/extension/bar.py # ditto, but no path was supplied for extension baz baz = ! enabled extensions: children command to display child changesets (DEPRECATED) rebase command to move sets of revisions to a different ancestor disabled extensions: acl hooks for controlling repository access blackbox log repository events to a blackbox for debugging bugzilla hooks for integrating with the Bugzilla bug tracker censor erase file content at a given revision churn command to display statistics about repository history clonebundles advertise pre-generated bundles to seed clones closehead close arbitrary heads without checking them out first convert import revisions from foreign VCS repositories into Mercurial eol automatically manage newlines in repository files extdiff command to allow external programs to compare revisions factotum http authentication with factotum fastexport export repositories as git fast-import stream githelp try mapping git commands to Mercurial commands gpg commands to sign and verify changesets hgk browse the repository in a graphical way highlight syntax highlighting for hgweb (requires Pygments) histedit interactive history editing keyword expand keywords in tracked files largefiles track large binary files mq manage a stack of patches notify hooks for sending email push notifications patchbomb command to send changesets as (a series of) patch emails purge command to delete untracked files from the working directory relink recreates hardlinks between repository clones schemes extend schemes with shortcuts to repository swarms share share a common history between several working directories transplant command to transplant changesets from another branch win32mbcs allow the use of MBCS paths with problematic encodings zeroconf discover and advertise repositories on the local network #endif Verify that deprecated extensions are included if --verbose: $ hg -v help extensions | grep children children command to display child changesets (DEPRECATED) Verify that extension keywords appear in help templates $ hg help --config extensions.transplant= templating|grep transplant > /dev/null Test short command list with verbose option $ hg -v help shortlist Mercurial Distributed SCM basic commands: abort abort an unfinished operation (EXPERIMENTAL) add add the specified files on the next commit annotate, blame show changeset information by line for each file clone make a copy of an existing repository commit, ci commit the specified files or all outstanding changes continue resumes an interrupted operation (EXPERIMENTAL) diff diff repository (or selected files) export dump the header and diffs for one or more changesets forget forget the specified files on the next commit init create a new repository in the given directory log, history show revision history of entire repository or files merge merge another revision into working directory pull pull changes from the specified source push push changes to the specified destination remove, rm remove the specified files on the next commit serve start stand-alone webserver status, st show changed files in the working directory summary, sum summarize working directory state update, up, checkout, co update working directory (or switch revisions) global options ([+] can be repeated): -R --repository REPO repository root directory or name of overlay bundle file --cwd DIR change working directory -y --noninteractive do not prompt, automatically pick the first choice for all prompts -q --quiet suppress output -v --verbose enable additional output --color TYPE when to colorize (boolean, always, auto, never, or debug) --config CONFIG [+] set/override config option (use 'section.name=value') --debug enable debugging output --debugger start debugger --encoding ENCODE set the charset encoding (default: ascii) --encodingmode MODE set the charset encoding mode (default: strict) --traceback always print a traceback on exception --time time how long the command takes --profile print command execution profile --version output version information and exit -h --help display help and exit --hidden consider hidden changesets --pager TYPE when to paginate (boolean, always, auto, or never) (default: auto) (use 'hg help' for the full list of commands) $ hg add -h hg add [OPTION]... [FILE]... add the specified files on the next commit Schedule files to be version controlled and added to the repository. The files will be added to the repository at the next commit. To undo an add before that, see 'hg forget'. If no names are given, add all files to the repository (except files matching ".hgignore"). Returns 0 if all files are successfully added. options ([+] can be repeated): -I --include PATTERN [+] include names matching the given patterns -X --exclude PATTERN [+] exclude names matching the given patterns -S --subrepos recurse into subrepositories -n --dry-run do not perform actions, just print output (some details hidden, use --verbose to show complete help) Verbose help for add $ hg add -hv hg add [OPTION]... [FILE]... add the specified files on the next commit Schedule files to be version controlled and added to the repository. The files will be added to the repository at the next commit. To undo an add before that, see 'hg forget'. If no names are given, add all files to the repository (except files matching ".hgignore"). Examples: - New (unknown) files are added automatically by 'hg add': $ ls foo.c $ hg status ? foo.c $ hg add adding foo.c $ hg status A foo.c - Specific files to be added can be specified: $ ls bar.c foo.c $ hg status ? bar.c ? foo.c $ hg add bar.c $ hg status A bar.c ? foo.c Returns 0 if all files are successfully added. options ([+] can be repeated): -I --include PATTERN [+] include names matching the given patterns -X --exclude PATTERN [+] exclude names matching the given patterns -S --subrepos recurse into subrepositories -n --dry-run do not perform actions, just print output global options ([+] can be repeated): -R --repository REPO repository root directory or name of overlay bundle file --cwd DIR change working directory -y --noninteractive do not prompt, automatically pick the first choice for all prompts -q --quiet suppress output -v --verbose enable additional output --color TYPE when to colorize (boolean, always, auto, never, or debug) --config CONFIG [+] set/override config option (use 'section.name=value') --debug enable debugging output --debugger start debugger --encoding ENCODE set the charset encoding (default: ascii) --encodingmode MODE set the charset encoding mode (default: strict) --traceback always print a traceback on exception --time time how long the command takes --profile print command execution profile --version output version information and exit -h --help display help and exit --hidden consider hidden changesets --pager TYPE when to paginate (boolean, always, auto, or never) (default: auto) Test the textwidth config option $ hg root -h --config ui.textwidth=50 hg root print the root (top) of the current working directory Print the root directory of the current repository. Returns 0 on success. options: -T --template TEMPLATE display with template (some details hidden, use --verbose to show complete help) Test help option with version option $ hg add -h --version Mercurial Distributed SCM (version *) (glob) (see https://mercurial-scm.org for more information) Copyright (C) 2005-* Matt Mackall and others (glob) This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ hg add --skjdfks hg add: option --skjdfks not recognized hg add [OPTION]... [FILE]... add the specified files on the next commit options ([+] can be repeated): -I --include PATTERN [+] include names matching the given patterns -X --exclude PATTERN [+] exclude names matching the given patterns -S --subrepos recurse into subrepositories -n --dry-run do not perform actions, just print output (use 'hg add -h' to show more help) [255] Test ambiguous command help $ hg help ad list of commands: add add the specified files on the next commit addremove add all new files, delete all missing files (use 'hg help -v ad' to show built-in aliases and global options) Test command without options $ hg help verify hg verify verify the integrity of the repository Verify the integrity of the current repository. This will perform an extensive check of the repository's integrity, validating the hashes and checksums of each entry in the changelog, manifest, and tracked files, as well as the integrity of their crosslinks and indices. Please see https://mercurial-scm.org/wiki/RepositoryCorruption for more information about recovery from corruption of the repository. Returns 0 on success, 1 if errors are encountered. options: (some details hidden, use --verbose to show complete help) $ hg help diff hg diff [OPTION]... ([-c REV] | [--from REV1] [--to REV2]) [FILE]... diff repository (or selected files) Show differences between revisions for the specified files. Differences between files are shown using the unified diff format. Note: 'hg diff' may generate unexpected results for merges, as it will default to comparing against the working directory's first parent changeset if no revisions are specified. By default, the working directory files are compared to its first parent. To see the differences from another revision, use --from. To see the difference to another revision, use --to. For example, 'hg diff --from .^' will show the differences from the working copy's grandparent to the working copy, 'hg diff --to .' will show the diff from the working copy to its parent (i.e. the reverse of the default), and 'hg diff --from 1.0 --to 1.2' will show the diff between those two revisions. Alternatively you can specify -c/--change with a revision to see the changes in that changeset relative to its first parent (i.e. 'hg diff -c 42' is equivalent to 'hg diff --from 42^ --to 42') Without the -a/--text option, diff will avoid generating diffs of files it detects as binary. With -a, diff will generate a diff anyway, probably with undesirable results. Use the -g/--git option to generate diffs in the git extended diff format. For more information, read 'hg help diffs'. Returns 0 on success. options ([+] can be repeated): -r --rev REV [+] revision --from REV1 revision to diff from --to REV2 revision to diff to -c --change REV change made by revision -a --text treat all files as text -g --git use git extended diff format --binary generate binary diffs in git mode (default) --nodates omit dates from diff headers --noprefix omit a/ and b/ prefixes from filenames -p --show-function show which function each change is in --reverse produce a diff that undoes the changes -w --ignore-all-space ignore white space when comparing lines -b --ignore-space-change ignore changes in the amount of white space -B --ignore-blank-lines ignore changes whose lines are all blank -Z --ignore-space-at-eol ignore changes in whitespace at EOL -U --unified NUM number of lines of context to show --stat output diffstat-style summary of changes --root DIR produce diffs relative to subdirectory -I --include PATTERN [+] include names matching the given patterns -X --exclude PATTERN [+] exclude names matching the given patterns -S --subrepos recurse into subrepositories (some details hidden, use --verbose to show complete help) $ hg help status hg status [OPTION]... [FILE]... aliases: st show changed files in the working directory Show status of files in the repository. If names are given, only files that match are shown. Files that are clean or ignored or the source of a copy/move operation, are not listed unless -c/--clean, -i/--ignored, -C/--copies or -A/--all are given. Unless options described with "show only ..." are given, the options -mardu are used. Option -q/--quiet hides untracked (unknown and ignored) files unless explicitly requested with -u/--unknown or -i/--ignored. Note: 'hg status' may appear to disagree with diff if permissions have changed or a merge has occurred. The standard diff format does not report permission changes and diff only reports changes relative to one merge parent. If one revision is given, it is used as the base revision. If two revisions are given, the differences between them are shown. The --change option can also be used as a shortcut to list the changed files of a revision from its first parent. The codes used to show the status of files are: M = modified A = added R = removed C = clean ! = missing (deleted by non-hg command, but still tracked) ? = not tracked I = ignored = origin of the previous file (with --copies) Returns 0 on success. options ([+] can be repeated): -A --all show status of all files -m --modified show only modified files -a --added show only added files -r --removed show only removed files -d --deleted show only missing files -c --clean show only files without changes -u --unknown show only unknown (not tracked) files -i --ignored show only ignored files -n --no-status hide status prefix -C --copies show source of copied files -0 --print0 end filenames with NUL, for use with xargs --rev REV [+] show difference from revision --change REV list the changed files of a revision -I --include PATTERN [+] include names matching the given patterns -X --exclude PATTERN [+] exclude names matching the given patterns -S --subrepos recurse into subrepositories -T --template TEMPLATE display with template (some details hidden, use --verbose to show complete help) $ hg -q help status hg status [OPTION]... [FILE]... show changed files in the working directory $ hg help foo abort: no such help topic: foo (try 'hg help --keyword foo') [255] $ hg skjdfks hg: unknown command 'skjdfks' (use 'hg help' for a list of commands) [255] Typoed command gives suggestion $ hg puls hg: unknown command 'puls' (did you mean one of pull, push?) [255] Not enabled extension gets suggested $ hg rebase hg: unknown command 'rebase' 'rebase' is provided by the following extension: rebase command to move sets of revisions to a different ancestor (use 'hg help extensions' for information on enabling extensions) [255] Disabled extension gets suggested $ hg --config extensions.rebase=! rebase hg: unknown command 'rebase' 'rebase' is provided by the following extension: rebase command to move sets of revisions to a different ancestor (use 'hg help extensions' for information on enabling extensions) [255] Checking that help adapts based on the config: $ hg help diff --config ui.tweakdefaults=true | egrep -e '^ *(-g|config)' -g --[no-]git use git extended diff format (default: on from config) Make sure that we don't run afoul of the help system thinking that this is a section and erroring out weirdly. $ hg .log hg: unknown command '.log' (did you mean log?) [255] $ hg log. hg: unknown command 'log.' (did you mean log?) [255] $ hg pu.lh hg: unknown command 'pu.lh' (did you mean one of pull, push?) [255] $ cat > helpext.py < import os > from mercurial import commands, fancyopts, registrar > > def func(arg): > return '%sfoo' % arg > class customopt(fancyopts.customopt): > def newstate(self, oldstate, newparam, abort): > return '%sbar' % oldstate > cmdtable = {} > command = registrar.command(cmdtable) > > @command(b'nohelp', > [(b'', b'longdesc', 3, b'x'*67), > (b'n', b'', None, b'normal desc'), > (b'', b'newline', b'', b'line1\nline2'), > (b'', b'default-off', False, b'enable X'), > (b'', b'default-on', True, b'enable Y'), > (b'', b'callableopt', func, b'adds foo'), > (b'', b'customopt', customopt(''), b'adds bar'), > (b'', b'customopt-withdefault', customopt('foo'), b'adds bar')], > b'hg nohelp', > norepo=True) > @command(b'debugoptADV', [(b'', b'aopt', None, b'option is (ADVANCED)')]) > @command(b'debugoptDEP', [(b'', b'dopt', None, b'option is (DEPRECATED)')]) > @command(b'debugoptEXP', [(b'', b'eopt', None, b'option is (EXPERIMENTAL)')]) > def nohelp(ui, *args, **kwargs): > pass > > @command(b'hashelp', [], b'hg hashelp', norepo=True) > def hashelp(ui, *args, **kwargs): > """Extension command's help""" > > def uisetup(ui): > ui.setconfig(b'alias', b'shellalias', b'!echo hi', b'helpext') > ui.setconfig(b'alias', b'hgalias', b'summary', b'helpext') > ui.setconfig(b'alias', b'hgalias:doc', b'My doc', b'helpext') > ui.setconfig(b'alias', b'hgalias:category', b'navigation', b'helpext') > ui.setconfig(b'alias', b'hgaliasnodoc', b'summary', b'helpext') > > EOF $ echo '[extensions]' >> $HGRCPATH $ echo "helpext = `pwd`/helpext.py" >> $HGRCPATH Test for aliases $ hg help | grep hgalias hgalias My doc $ hg help hgalias hg hgalias [--remote] alias for: hg summary My doc defined by: helpext options: --remote check for push and pull (some details hidden, use --verbose to show complete help) $ hg help hgaliasnodoc hg hgaliasnodoc [--remote] alias for: hg summary summarize working directory state This generates a brief summary of the working directory state, including parents, branch, commit status, phase and available updates. With the --remote option, this will check the default paths for incoming and outgoing changes. This can be time-consuming. Returns 0 on success. defined by: helpext options: --remote check for push and pull (some details hidden, use --verbose to show complete help) $ hg help shellalias hg shellalias shell alias for: echo hi (no help text available) defined by: helpext (some details hidden, use --verbose to show complete help) Test command with no help text $ hg help nohelp hg nohelp (no help text available) options: --longdesc VALUE xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxx (default: 3) -n -- normal desc --newline VALUE line1 line2 --default-off enable X --[no-]default-on enable Y (default: on) --callableopt VALUE adds foo --customopt VALUE adds bar --customopt-withdefault VALUE adds bar (default: foo) (some details hidden, use --verbose to show complete help) Test that default list of commands includes extension commands that have help, but not those that don't, except in verbose mode, when a keyword is passed, or when help about the extension is requested. #if no-extraextensions $ hg help | grep hashelp hashelp Extension command's help $ hg help | grep nohelp [1] $ hg help -v | grep nohelp nohelp (no help text available) $ hg help -k nohelp Commands: nohelp hg nohelp Extension Commands: nohelp (no help text available) $ hg help helpext helpext extension - no help text available list of commands: hashelp Extension command's help nohelp (no help text available) (use 'hg help -v helpext' to show built-in aliases and global options) #endif Test list of internal help commands $ hg help debug debug commands (internal and unsupported): debugancestor find the ancestor revision of two revisions in a given index debugantivirusrunning attempt to trigger an antivirus scanner to see if one is active debugapplystreamclonebundle apply a stream clone bundle file debugbackupbundle lists the changesets available in backup bundles debugbuilddag builds a repo with a given DAG from scratch in the current empty repo debugbundle lists the contents of a bundle debugcapabilities lists the capabilities of a remote peer debugchangedfiles list the stored files changes for a revision debugcheckstate validate the correctness of the current dirstate debugcolor show available color, effects or style debugcommands list all available commands and options debugcomplete returns the completion list associated with the given command debugcreatestreamclonebundle create a stream clone bundle file debugdag format the changelog or an index DAG as a concise textual description debugdata dump the contents of a data file revision debugdate parse and display a date debugdeltachain dump information about delta chains in a revlog debugdirstate show the contents of the current dirstate debugdiscovery runs the changeset discovery protocol in isolation debugdownload download a resource using Mercurial logic and config debugextensions show information about active extensions debugfileset parse and apply a fileset specification debugformat display format information about the current repository debugfsinfo show information detected about current filesystem debuggetbundle retrieves a bundle from a repo debugignore display the combined ignore pattern and information about ignored files debugindex dump index data for a storage primitive debugindexdot dump an index DAG as a graphviz dot file debugindexstats show stats related to the changelog index debuginstall test Mercurial installation debugknown test whether node ids are known to a repo debuglocks show or modify state of locks debugmanifestfulltextcache show, clear or amend the contents of the manifest fulltext cache debugmergestate print merge state debugnamecomplete complete "names" - tags, open branch names, bookmark names debugnodemap write and inspect on disk nodemap debugobsolete create arbitrary obsolete marker debugoptADV (no help text available) debugoptDEP (no help text available) debugoptEXP (no help text available) debugp1copies dump copy information compared to p1 debugp2copies dump copy information compared to p2 debugpathcomplete complete part or all of a tracked path debugpathcopies show copies between two revisions debugpeer establish a connection to a peer repository debugpickmergetool examine which merge tool is chosen for specified file debugpushkey access the pushkey key/value protocol debugpvec (no help text available) debugrebuilddirstate rebuild the dirstate as it would look like for the given revision debugrebuildfncache rebuild the fncache file debugrename dump rename information debugrequires print the current repo requirements debugrevlog show data and statistics about a revlog debugrevlogindex dump the contents of a revlog index debugrevspec parse and apply a revision specification debugserve run a server with advanced settings debugsetparents manually set the parents of the current working directory debugsidedata dump the side data for a cl/manifest/file revision debugssl test a secure connection to a server debugstrip strip changesets and all their descendants from the repository debugsub (no help text available) debugsuccessorssets show set of successors for revision debugtagscache display the contents of .hg/cache/hgtagsfnodes1 debugtemplate parse and apply a template debuguigetpass show prompt to type password debuguiprompt show plain prompt debugupdatecaches warm all known caches in the repository debugupgraderepo upgrade a repository to use different features debugwalk show how files match on given patterns debugwhyunstable explain instabilities of a changeset debugwireargs (no help text available) debugwireproto send wire protocol commands to a server (use 'hg help -v debug' to show built-in aliases and global options) internals topic renders index of available sub-topics $ hg help internals Technical implementation topics """"""""""""""""""""""""""""""" To access a subtopic, use "hg help internals.{subtopic-name}" bid-merge Bid Merge Algorithm bundle2 Bundle2 bundles Bundles cbor CBOR censor Censor changegroups Changegroups config Config Registrar extensions Extension API mergestate Mergestate requirements Repository Requirements revlogs Revision Logs wireprotocol Wire Protocol wireprotocolrpc Wire Protocol RPC wireprotocolv2 Wire Protocol Version 2 sub-topics can be accessed $ hg help internals.changegroups Changegroups """""""""""" Changegroups are representations of repository revlog data, specifically the changelog data, root/flat manifest data, treemanifest data, and filelogs. There are 3 versions of changegroups: "1", "2", and "3". From a high- level, versions "1" and "2" are almost exactly the same, with the only difference being an additional item in the *delta header*. Version "3" adds support for storage flags in the *delta header* and optionally exchanging treemanifests (enabled by setting an option on the "changegroup" part in the bundle2). Changegroups when not exchanging treemanifests consist of 3 logical segments: +---------------------------------+ | | | | | changeset | manifest | filelogs | | | | | | | | | +---------------------------------+ When exchanging treemanifests, there are 4 logical segments: +-------------------------------------------------+ | | | | | | changeset | root | treemanifests | filelogs | | | manifest | | | | | | | | +-------------------------------------------------+ The principle building block of each segment is a *chunk*. A *chunk* is a framed piece of data: +---------------------------------------+ | | | | length | data | | (4 bytes) | ( bytes) | | | | +---------------------------------------+ All integers are big-endian signed integers. Each chunk starts with a 32-bit integer indicating the length of the entire chunk (including the length field itself). There is a special case chunk that has a value of 0 for the length ("0x00000000"). We call this an *empty chunk*. Delta Groups ============ A *delta group* expresses the content of a revlog as a series of deltas, or patches against previous revisions. Delta groups consist of 0 or more *chunks* followed by the *empty chunk* to signal the end of the delta group: +------------------------------------------------------------------------+ | | | | | | | chunk0 length | chunk0 data | chunk1 length | chunk1 data | 0x0 | | (4 bytes) | (various) | (4 bytes) | (various) | (4 bytes) | | | | | | | +------------------------------------------------------------------------+ Each *chunk*'s data consists of the following: +---------------------------------------+ | | | | delta header | delta data | | (various by version) | (various) | | | | +---------------------------------------+ The *delta data* is a series of *delta*s that describe a diff from an existing entry (either that the recipient already has, or previously specified in the bundle/changegroup). The *delta header* is different between versions "1", "2", and "3" of the changegroup format. Version 1 (headerlen=80): +------------------------------------------------------+ | | | | | | node | p1 node | p2 node | link node | | (20 bytes) | (20 bytes) | (20 bytes) | (20 bytes) | | | | | | +------------------------------------------------------+ Version 2 (headerlen=100): +------------------------------------------------------------------+ | | | | | | | node | p1 node | p2 node | base node | link node | | (20 bytes) | (20 bytes) | (20 bytes) | (20 bytes) | (20 bytes) | | | | | | | +------------------------------------------------------------------+ Version 3 (headerlen=102): +------------------------------------------------------------------------------+ | | | | | | | | node | p1 node | p2 node | base node | link node | flags | | (20 bytes) | (20 bytes) | (20 bytes) | (20 bytes) | (20 bytes) | (2 bytes) | | | | | | | | +------------------------------------------------------------------------------+ The *delta data* consists of "chunklen - 4 - headerlen" bytes, which contain a series of *delta*s, densely packed (no separators). These deltas describe a diff from an existing entry (either that the recipient already has, or previously specified in the bundle/changegroup). The format is described more fully in "hg help internals.bdiff", but briefly: +---------------------------------------------------------------+ | | | | | | start offset | end offset | new length | content | | (4 bytes) | (4 bytes) | (4 bytes) | ( bytes) | | | | | | +---------------------------------------------------------------+ Please note that the length field in the delta data does *not* include itself. In version 1, the delta is always applied against the previous node from the changegroup or the first parent if this is the first entry in the changegroup. In version 2 and up, the delta base node is encoded in the entry in the changegroup. This allows the delta to be expressed against any parent, which can result in smaller deltas and more efficient encoding of data. The *flags* field holds bitwise flags affecting the processing of revision data. The following flags are defined: 32768 Censored revision. The revision's fulltext has been replaced by censor metadata. May only occur on file revisions. 16384 Ellipsis revision. Revision hash does not match data (likely due to rewritten parents). 8192 Externally stored. The revision fulltext contains "key:value" "\n" delimited metadata defining an object stored elsewhere. Used by the LFS extension. For historical reasons, the integer values are identical to revlog version 1 per-revision storage flags and correspond to bits being set in this 2-byte field. Bits were allocated starting from the most-significant bit, hence the reverse ordering and allocation of these flags. Changeset Segment ================= The *changeset segment* consists of a single *delta group* holding changelog data. The *empty chunk* at the end of the *delta group* denotes the boundary to the *manifest segment*. Manifest Segment ================ The *manifest segment* consists of a single *delta group* holding manifest data. If treemanifests are in use, it contains only the manifest for the root directory of the repository. Otherwise, it contains the entire manifest data. The *empty chunk* at the end of the *delta group* denotes the boundary to the next segment (either the *treemanifests segment* or the *filelogs segment*, depending on version and the request options). Treemanifests Segment --------------------- The *treemanifests segment* only exists in changegroup version "3", and only if the 'treemanifest' param is part of the bundle2 changegroup part (it is not possible to use changegroup version 3 outside of bundle2). Aside from the filenames in the *treemanifests segment* containing a trailing "/" character, it behaves identically to the *filelogs segment* (see below). The final sub-segment is followed by an *empty chunk* (logically, a sub-segment with filename size 0). This denotes the boundary to the *filelogs segment*. Filelogs Segment ================ The *filelogs segment* consists of multiple sub-segments, each corresponding to an individual file whose data is being described: +--------------------------------------------------+ | | | | | | | filelog0 | filelog1 | filelog2 | ... | 0x0 | | | | | | (4 bytes) | | | | | | | +--------------------------------------------------+ The final filelog sub-segment is followed by an *empty chunk* (logically, a sub-segment with filename size 0). This denotes the end of the segment and of the overall changegroup. Each filelog sub-segment consists of the following: +------------------------------------------------------+ | | | | | filename length | filename | delta group | | (4 bytes) | ( bytes) | (various) | | | | | +------------------------------------------------------+ That is, a *chunk* consisting of the filename (not terminated or padded) followed by N chunks constituting the *delta group* for this file. The *empty chunk* at the end of each *delta group* denotes the boundary to the next filelog sub-segment. non-existent subtopics print an error $ hg help internals.foo abort: no such help topic: internals.foo (try 'hg help --keyword foo') [255] test advanced, deprecated and experimental options are hidden in command help $ hg help debugoptADV hg debugoptADV (no help text available) options: (some details hidden, use --verbose to show complete help) $ hg help debugoptDEP hg debugoptDEP (no help text available) options: (some details hidden, use --verbose to show complete help) $ hg help debugoptEXP hg debugoptEXP (no help text available) options: (some details hidden, use --verbose to show complete help) test advanced, deprecated and experimental options are shown with -v $ hg help -v debugoptADV | grep aopt --aopt option is (ADVANCED) $ hg help -v debugoptDEP | grep dopt --dopt option is (DEPRECATED) $ hg help -v debugoptEXP | grep eopt --eopt option is (EXPERIMENTAL) #if gettext test deprecated option is hidden with translation with untranslated description (use many globy for not failing on changed transaction) $ LANGUAGE=sv hg help debugoptDEP hg debugoptDEP (*) (glob) options: (some details hidden, use --verbose to show complete help) #endif Test commands that collide with topics (issue4240) $ hg config -hq hg config [-u] [NAME]... show combined config settings from all hgrc files $ hg showconfig -hq hg config [-u] [NAME]... show combined config settings from all hgrc files Test a help topic $ hg help dates Date Formats """""""""""" Some commands allow the user to specify a date, e.g.: - backout, commit, import, tag: Specify the commit date. - log, revert, update: Select revision(s) by date. Many date formats are valid. Here are some examples: - "Wed Dec 6 13:18:29 2006" (local timezone assumed) - "Dec 6 13:18 -0600" (year assumed, time offset provided) - "Dec 6 13:18 UTC" (UTC and GMT are aliases for +0000) - "Dec 6" (midnight) - "13:18" (today assumed) - "3:39" (3:39AM assumed) - "3:39pm" (15:39) - "2006-12-06 13:18:29" (ISO 8601 format) - "2006-12-6 13:18" - "2006-12-6" - "12-6" - "12/6" - "12/6/6" (Dec 6 2006) - "today" (midnight) - "yesterday" (midnight) - "now" - right now Lastly, there is Mercurial's internal format: - "1165411109 0" (Wed Dec 6 13:18:29 2006 UTC) This is the internal representation format for dates. The first number is the number of seconds since the epoch (1970-01-01 00:00 UTC). The second is the offset of the local timezone, in seconds west of UTC (negative if the timezone is east of UTC). The log command also accepts date ranges: - "DATE" - on or after a given date/time - "DATE to DATE" - a date range, inclusive - "-DAYS" - within a given number of days from today Test repeated config section name $ hg help config.host "http_proxy.host" Host name and (optional) port of the proxy server, for example "myproxy:8000". "smtp.host" Host name of mail server, e.g. "mail.example.com". Test section name with dot $ hg help config.ui.username "ui.username" The committer of a changeset created when running "commit". Typically a person's name and email address, e.g. "Fred Widget ". Environment variables in the username are expanded. (default: "$EMAIL" or "username@hostname". If the username in hgrc is empty, e.g. if the system admin set "username =" in the system hgrc, it has to be specified manually or in a different hgrc file) $ hg help config.annotate.git abort: help section not found: config.annotate.git [255] $ hg help config.update.check "commands.update.check" Determines what level of checking 'hg update' will perform before moving to a destination revision. Valid values are "abort", "none", "linear", and "noconflict". "abort" always fails if the working directory has uncommitted changes. "none" performs no checking, and may result in a merge with uncommitted changes. "linear" allows any update as long as it follows a straight line in the revision history, and may trigger a merge with uncommitted changes. "noconflict" will allow any update which would not trigger a merge with uncommitted changes, if any are present. (default: "linear") $ hg help config.commands.update.check "commands.update.check" Determines what level of checking 'hg update' will perform before moving to a destination revision. Valid values are "abort", "none", "linear", and "noconflict". "abort" always fails if the working directory has uncommitted changes. "none" performs no checking, and may result in a merge with uncommitted changes. "linear" allows any update as long as it follows a straight line in the revision history, and may trigger a merge with uncommitted changes. "noconflict" will allow any update which would not trigger a merge with uncommitted changes, if any are present. (default: "linear") $ hg help config.ommands.update.check abort: help section not found: config.ommands.update.check [255] Unrelated trailing paragraphs shouldn't be included $ hg help config.extramsg | grep '^$' Test capitalized section name $ hg help scripting.HGPLAIN > /dev/null Help subsection: $ hg help config.charsets |grep "Email example:" > /dev/null [1] Show nested definitions ("profiling.type"[break]"ls"[break]"stat"[break]) $ hg help config.type | egrep '^$'|wc -l \s*3 (re) $ hg help config.profiling.type.ls "profiling.type.ls" Use Python's built-in instrumenting profiler. This profiler works on all platforms, but each line number it reports is the first line of a function. This restriction makes it difficult to identify the expensive parts of a non-trivial function. Separate sections from subsections $ hg help config.format | egrep '^ ("|-)|^\s*$' | uniq "format" -------- "usegeneraldelta" "dotencode" "usefncache" "usestore" "sparse-revlog" "revlog-compression" "bookmarks-in-store" "profiling" ----------- "format" "progress" ---------- "format" Last item in help config.*: $ hg help config.`hg help config|grep '^ "'| \ > tail -1|sed 's![ "]*!!g'`| \ > grep 'hg help -c config' > /dev/null [1] note to use help -c for general hg help config: $ hg help config |grep 'hg help -c config' > /dev/null Test templating help $ hg help templating | egrep '(desc|diffstat|firstline|nonempty) ' desc String. The text of the changeset description. diffstat String. Statistics of changes with the following format: firstline Any text. Returns the first line of text. nonempty Any text. Returns '(none)' if the string is empty. Test deprecated items $ hg help -v templating | grep currentbookmark currentbookmark $ hg help templating | (grep currentbookmark || true) Test help hooks $ cat > helphook1.py < from mercurial import help > > def rewrite(ui, topic, doc): > return doc + b'\nhelphook1\n' > > def extsetup(ui): > help.addtopichook(b'revisions', rewrite) > EOF $ cat > helphook2.py < from mercurial import help > > def rewrite(ui, topic, doc): > return doc + b'\nhelphook2\n' > > def extsetup(ui): > help.addtopichook(b'revisions', rewrite) > EOF $ echo '[extensions]' >> $HGRCPATH $ echo "helphook1 = `pwd`/helphook1.py" >> $HGRCPATH $ echo "helphook2 = `pwd`/helphook2.py" >> $HGRCPATH $ hg help revsets | grep helphook helphook1 helphook2 help -c should only show debug --debug $ hg help -c --debug|egrep debug|wc -l|egrep '^\s*0\s*$' [1] help -c should only show deprecated for -v $ hg help -c -v|egrep DEPRECATED|wc -l|egrep '^\s*0\s*$' [1] Test -s / --system $ hg help config.files -s windows |grep 'etc/mercurial' | \ > wc -l | sed -e 's/ //g' 0 $ hg help config.files --system unix | grep 'USER' | \ > wc -l | sed -e 's/ //g' 0 Test -e / -c / -k combinations $ hg help -c|egrep '^[A-Z].*:|^ debug' Commands: $ hg help -e|egrep '^[A-Z].*:|^ debug' Extensions: $ hg help -k|egrep '^[A-Z].*:|^ debug' Topics: Commands: Extensions: Extension Commands: $ hg help -c schemes abort: no such help topic: schemes (try 'hg help --keyword schemes') [255] $ hg help -e schemes |head -1 schemes extension - extend schemes with shortcuts to repository swarms $ hg help -c -k dates |egrep '^(Topics|Extensions|Commands):' Commands: $ hg help -e -k a |egrep '^(Topics|Extensions|Commands):' Extensions: $ hg help -e -c -k date |egrep '^(Topics|Extensions|Commands):' Extensions: Commands: $ hg help -c commit > /dev/null $ hg help -e -c commit > /dev/null $ hg help -e commit abort: no such help topic: commit (try 'hg help --keyword commit') [255] Test keyword search help $ cat > prefixedname.py < '''matched against word "clone" > ''' > EOF $ echo '[extensions]' >> $HGRCPATH $ echo "dot.dot.prefixedname = `pwd`/prefixedname.py" >> $HGRCPATH $ hg help -k clone Topics: config Configuration Files extensions Using Additional Features glossary Glossary phases Working with Phases subrepos Subrepositories urls URL Paths Commands: bookmarks create a new bookmark or list existing bookmarks clone make a copy of an existing repository paths show aliases for remote repositories pull pull changes from the specified source update update working directory (or switch revisions) Extensions: clonebundles advertise pre-generated bundles to seed clones narrow create clones which fetch history data for subset of files (EXPERIMENTAL) prefixedname matched against word "clone" relink recreates hardlinks between repository clones Extension Commands: qclone clone main and patch repository at same time Test unfound topic $ hg help nonexistingtopicthatwillneverexisteverever abort: no such help topic: nonexistingtopicthatwillneverexisteverever (try 'hg help --keyword nonexistingtopicthatwillneverexisteverever') [255] Test unfound keyword $ hg help --keyword nonexistingwordthatwillneverexisteverever abort: no matches (try 'hg help' for a list of topics) [255] Test omit indicating for help $ cat > addverboseitems.py < r'''extension to test omit indicating. > > This paragraph is never omitted (for extension) > > .. container:: verbose > > This paragraph is omitted, > if :hg:\`help\` is invoked without \`\`-v\`\` (for extension) > > This paragraph is never omitted, too (for extension) > ''' > from __future__ import absolute_import > from mercurial import commands, help > testtopic = br"""This paragraph is never omitted (for topic). > > .. container:: verbose > > This paragraph is omitted, > if :hg:\`help\` is invoked without \`\`-v\`\` (for topic) > > This paragraph is never omitted, too (for topic) > """ > def extsetup(ui): > help.helptable.append(([b"topic-containing-verbose"], > b"This is the topic to test omit indicating.", > lambda ui: testtopic)) > EOF $ echo '[extensions]' >> $HGRCPATH $ echo "addverboseitems = `pwd`/addverboseitems.py" >> $HGRCPATH $ hg help addverboseitems addverboseitems extension - extension to test omit indicating. This paragraph is never omitted (for extension) This paragraph is never omitted, too (for extension) (some details hidden, use --verbose to show complete help) no commands defined $ hg help -v addverboseitems addverboseitems extension - extension to test omit indicating. This paragraph is never omitted (for extension) This paragraph is omitted, if 'hg help' is invoked without "-v" (for extension) This paragraph is never omitted, too (for extension) no commands defined $ hg help topic-containing-verbose This is the topic to test omit indicating. """""""""""""""""""""""""""""""""""""""""" This paragraph is never omitted (for topic). This paragraph is never omitted, too (for topic) (some details hidden, use --verbose to show complete help) $ hg help -v topic-containing-verbose This is the topic to test omit indicating. """""""""""""""""""""""""""""""""""""""""" This paragraph is never omitted (for topic). This paragraph is omitted, if 'hg help' is invoked without "-v" (for topic) This paragraph is never omitted, too (for topic) Test section lookup $ hg help revset.merge "merge()" Changeset is a merge changeset. $ hg help glossary.dag DAG The repository of changesets of a distributed version control system (DVCS) can be described as a directed acyclic graph (DAG), consisting of nodes and edges, where nodes correspond to changesets and edges imply a parent -> child relation. This graph can be visualized by graphical tools such as 'hg log --graph'. In Mercurial, the DAG is limited by the requirement for children to have at most two parents. $ hg help hgrc.paths "paths" ------- Assigns symbolic names and behavior to repositories. Options are symbolic names defining the URL or directory that is the location of the repository. Example: [paths] my_server = https://example.com/my_repo local_path = /home/me/repo These symbolic names can be used from the command line. To pull from "my_server": 'hg pull my_server'. To push to "local_path": 'hg push local_path'. Options containing colons (":") denote sub-options that can influence behavior for that specific path. Example: [paths] my_server = https://example.com/my_path my_server:pushurl = ssh://example.com/my_path The following sub-options can be defined: "pushurl" The URL to use for push operations. If not defined, the location defined by the path's main entry is used. "pushrev" A revset defining which revisions to push by default. When 'hg push' is executed without a "-r" argument, the revset defined by this sub-option is evaluated to determine what to push. For example, a value of "." will push the working directory's revision by default. Revsets specifying bookmarks will not result in the bookmark being pushed. The following special named paths exist: "default" The URL or directory to use when no source or remote is specified. 'hg clone' will automatically define this path to the location the repository was cloned from. "default-push" (deprecated) The URL or directory for the default 'hg push' location. "default:pushurl" should be used instead. $ hg help glossary.mcguffin abort: help section not found: glossary.mcguffin [255] $ hg help glossary.mc.guffin abort: help section not found: glossary.mc.guffin [255] $ hg help template.files files List of strings. All files modified, added, or removed by this changeset. files(pattern) All files of the current changeset matching the pattern. See 'hg help patterns'. Test section lookup by translated message str.lower() instead of encoding.lower(str) on translated message might make message meaningless, because some encoding uses 0x41(A) - 0x5a(Z) as the second or later byte of multi-byte character. For example, "\x8bL\x98^" (translation of "record" in ja_JP.cp932) contains 0x4c (L). str.lower() replaces 0x4c(L) by 0x6c(l) and this replacement makes message meaningless. This tests that section lookup by translated string isn't broken by such str.lower(). $ "$PYTHON" < def escape(s): > return b''.join(b'\\u%x' % ord(uc) for uc in s.decode('cp932')) > # translation of "record" in ja_JP.cp932 > upper = b"\x8bL\x98^" > # str.lower()-ed section name should be treated as different one > lower = b"\x8bl\x98^" > with open('ambiguous.py', 'wb') as fp: > fp.write(b"""# ambiguous section names in ja_JP.cp932 > u'''summary of extension > > %s > ---- > > Upper name should show only this message > > %s > ---- > > Lower name should show only this message > > subsequent section > ------------------ > > This should be hidden at 'hg help ambiguous' with section name. > ''' > """ % (escape(upper), escape(lower))) > EOF $ cat >> $HGRCPATH < [extensions] > ambiguous = ./ambiguous.py > EOF $ "$PYTHON" < from mercurial.utils import procutil > upper = b"\x8bL\x98^" > procutil.stdout.write(b"hg --encoding cp932 help -e ambiguous.%s\n" % upper) > EOF \x8bL\x98^ (esc) ---- Upper name should show only this message $ "$PYTHON" < from mercurial.utils import procutil > lower = b"\x8bl\x98^" > procutil.stdout.write(b"hg --encoding cp932 help -e ambiguous.%s\n" % lower) > EOF \x8bl\x98^ (esc) ---- Lower name should show only this message $ cat >> $HGRCPATH < [extensions] > ambiguous = ! > EOF Show help content of disabled extensions $ cat >> $HGRCPATH < [extensions] > ambiguous = !./ambiguous.py > EOF $ hg help -e ambiguous ambiguous extension - (no help text available) (use 'hg help extensions' for information on enabling extensions) Test dynamic list of merge tools only shows up once $ hg help merge-tools Merge Tools """"""""""" To merge files Mercurial uses merge tools. A merge tool combines two different versions of a file into a merged file. Merge tools are given the two files and the greatest common ancestor of the two file versions, so they can determine the changes made on both branches. Merge tools are used both for 'hg resolve', 'hg merge', 'hg update', 'hg backout' and in several extensions. Usually, the merge tool tries to automatically reconcile the files by combining all non-overlapping changes that occurred separately in the two different evolutions of the same initial base file. Furthermore, some interactive merge programs make it easier to manually resolve conflicting merges, either in a graphical way, or by inserting some conflict markers. Mercurial does not include any interactive merge programs but relies on external tools for that. Available merge tools ===================== External merge tools and their properties are configured in the merge- tools configuration section - see hgrc(5) - but they can often just be named by their executable. A merge tool is generally usable if its executable can be found on the system and if it can handle the merge. The executable is found if it is an absolute or relative executable path or the name of an application in the executable search path. The tool is assumed to be able to handle the merge if it can handle symlinks if the file is a symlink, if it can handle binary files if the file is binary, and if a GUI is available if the tool requires a GUI. There are some internal merge tools which can be used. The internal merge tools are: ":dump" Creates three versions of the files to merge, containing the contents of local, other and base. These files can then be used to perform a merge manually. If the file to be merged is named "a.txt", these files will accordingly be named "a.txt.local", "a.txt.other" and "a.txt.base" and they will be placed in the same directory as "a.txt". This implies premerge. Therefore, files aren't dumped, if premerge runs successfully. Use :forcedump to forcibly write files out. (actual capabilities: binary, symlink) ":fail" Rather than attempting to merge files that were modified on both branches, it marks them as unresolved. The resolve command must be used to resolve these conflicts. (actual capabilities: binary, symlink) ":forcedump" Creates three versions of the files as same as :dump, but omits premerge. (actual capabilities: binary, symlink) ":local" Uses the local 'p1()' version of files as the merged version. (actual capabilities: binary, symlink) ":merge" Uses the internal non-interactive simple merge algorithm for merging files. It will fail if there are any conflicts and leave markers in the partially merged file. Markers will have two sections, one for each side of merge. ":merge-local" Like :merge, but resolve all conflicts non-interactively in favor of the local 'p1()' changes. ":merge-other" Like :merge, but resolve all conflicts non-interactively in favor of the other 'p2()' changes. ":merge3" Uses the internal non-interactive simple merge algorithm for merging files. It will fail if there are any conflicts and leave markers in the partially merged file. Marker will have three sections, one from each side of the merge and one for the base content. ":other" Uses the other 'p2()' version of files as the merged version. (actual capabilities: binary, symlink) ":prompt" Asks the user which of the local 'p1()' or the other 'p2()' version to keep as the merged version. (actual capabilities: binary, symlink) ":tagmerge" Uses the internal tag merge algorithm (experimental). ":union" Uses the internal non-interactive simple merge algorithm for merging files. It will use both left and right sides for conflict regions. No markers are inserted. Internal tools are always available and do not require a GUI but will by default not handle symlinks or binary files. See next section for detail about "actual capabilities" described above. Choosing a merge tool ===================== Mercurial uses these rules when deciding which merge tool to use: 1. If a tool has been specified with the --tool option to merge or resolve, it is used. If it is the name of a tool in the merge-tools configuration, its configuration is used. Otherwise the specified tool must be executable by the shell. 2. If the "HGMERGE" environment variable is present, its value is used and must be executable by the shell. 3. If the filename of the file to be merged matches any of the patterns in the merge-patterns configuration section, the first usable merge tool corresponding to a matching pattern is used. 4. If ui.merge is set it will be considered next. If the value is not the name of a configured tool, the specified value is used and must be executable by the shell. Otherwise the named tool is used if it is usable. 5. If any usable merge tools are present in the merge-tools configuration section, the one with the highest priority is used. 6. If a program named "hgmerge" can be found on the system, it is used - but it will by default not be used for symlinks and binary files. 7. If the file to be merged is not binary and is not a symlink, then internal ":merge" is used. 8. Otherwise, ":prompt" is used. For historical reason, Mercurial treats merge tools as below while examining rules above. step specified via binary symlink ---------------------------------- 1. --tool o/o o/o 2. HGMERGE o/o o/o 3. merge-patterns o/o(*) x/?(*) 4. ui.merge x/?(*) x/?(*) Each capability column indicates Mercurial behavior for internal/external merge tools at examining each rule. - "o": "assume that a tool has capability" - "x": "assume that a tool does not have capability" - "?": "check actual capability of a tool" If "merge.strict-capability-check" configuration is true, Mercurial checks capabilities of merge tools strictly in (*) cases above (= each capability column becomes "?/?"). It is false by default for backward compatibility. Note: After selecting a merge program, Mercurial will by default attempt to merge the files using a simple merge algorithm first. Only if it doesn't succeed because of conflicting changes will Mercurial actually execute the merge program. Whether to use the simple merge algorithm first can be controlled by the premerge setting of the merge tool. Premerge is enabled by default unless the file is binary or a symlink. See the merge-tools and ui sections of hgrc(5) for details on the configuration of merge tools. Compression engines listed in `hg help bundlespec` $ hg help bundlespec | grep gzip "v1" bundles can only use the "gzip", "bzip2", and "none" compression An algorithm that produces smaller bundles than "gzip". This engine will likely produce smaller bundles than "gzip" but will be "gzip" better compression than "gzip". It also frequently yields better (?) Test usage of section marks in help documents $ cd "$TESTDIR"/../doc $ "$PYTHON" check-seclevel.py $ cd $TESTTMP #if serve Test the help pages in hgweb. Dish up an empty repo; serve it cold. $ hg init "$TESTTMP/test" $ hg serve -R "$TESTTMP/test" -n test -p $HGPORT -d --pid-file=hg.pid $ cat hg.pid >> $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT "help" 200 Script output follows Help: Index
  • help

Mercurial

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

Topics

bundlespec Bundle File Formats
color Colorizing Outputs
config Configuration Files
dates Date Formats
deprecated Deprecated Features
diffs Diff Formats
environment Environment Variables
extensions Using Additional Features
filesets Specifying File Sets
flags Command-line flags
glossary Glossary
hgignore Syntax for Mercurial Ignore Files
hgweb Configuring hgweb
internals Technical implementation topics
merge-tools Merge Tools
pager Pager Support
patterns File Name Patterns
phases Working with Phases
revisions Specifying Revisions
scripting Using Mercurial from scripts and automation
subrepos Subrepositories
templating Template Usage
urls URL Paths
topic-containing-verbose This is the topic to test omit indicating.

Main Commands

abort abort an unfinished operation (EXPERIMENTAL)
add add the specified files on the next commit
annotate show changeset information by line for each file
clone make a copy of an existing repository
commit commit the specified files or all outstanding changes
continue resumes an interrupted operation (EXPERIMENTAL)
diff diff repository (or selected files)
export dump the header and diffs for one or more changesets
forget forget the specified files on the next commit
init create a new repository in the given directory
log show revision history of entire repository or files
merge merge another revision into working directory
pull pull changes from the specified source
push push changes to the specified destination
remove remove the specified files on the next commit
serve start stand-alone webserver
status show changed files in the working directory
summary summarize working directory state
update update working directory (or switch revisions)

Other Commands

addremove add all new files, delete all missing files
archive create an unversioned archive of a repository revision
backout reverse effect of earlier changeset
bisect subdivision search of changesets
bookmarks create a new bookmark or list existing bookmarks
branch set or show the current branch name
branches list repository named branches
bundle create a bundle file
cat output the current or given revision of files
config show combined config settings from all hgrc files
copy mark files as copied for the next commit
files list tracked files
graft copy changes from other branches onto the current branch
grep search for a pattern in specified files
hashelp Extension command's help
heads show branch heads
help show help for a given topic or a help overview
hgalias My doc
hgaliasnodoc summarize working directory state
identify identify the working directory or specified revision
import import an ordered set of patches
incoming show new changesets found in source
manifest output the current or given revision of the project manifest
nohelp (no help text available)
outgoing show changesets not found in the destination
paths show aliases for remote repositories
phase set or show the current phase name
recover roll back an interrupted transaction
rename rename files; equivalent of copy + remove
resolve redo merges or set/view the merge status of files
revert restore files to their checkout state
root print the root (top) of the current working directory
shellalias (no help text available)
shelve save and set aside changes from the working directory
tag add one or more tags for the current or given revision
tags list repository tags
unbundle apply one or more bundle files
unshelve restore a shelved change to the working directory
verify verify the integrity of the repository
version output version and copyright information
$ get-with-headers.py $LOCALIP:$HGPORT "help/add" 200 Script output follows Help: add

Mercurial

Help: add

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

hg add [OPTION]... [FILE]...

add the specified files on the next commit

Schedule files to be version controlled and added to the repository.

The files will be added to the repository at the next commit. To undo an add before that, see 'hg forget'.

If no names are given, add all files to the repository (except files matching ".hgignore").

Examples:

  • New (unknown) files are added automatically by 'hg add': 
      \$ ls (re)
  foo.c
  \$ hg status (re)
  ? foo.c
  \$ hg add (re)
  adding foo.c
  \$ hg status (re)
  A foo.c
  • Specific files to be added can be specified: 
      \$ ls (re)
  bar.c  foo.c
  \$ hg status (re)
  ? bar.c
  ? foo.c
  \$ hg add bar.c (re)
  \$ hg status (re)
  A bar.c
  ? foo.c

Returns 0 if all files are successfully added.

options ([+] can be repeated):

-I --include PATTERN [+] include names matching the given patterns
-X --exclude PATTERN [+] exclude names matching the given patterns
-S --subrepos recurse into subrepositories
-n --dry-run do not perform actions, just print output

global options ([+] can be repeated):

-R --repository REPO repository root directory or name of overlay bundle file
--cwd DIR change working directory
-y --noninteractive do not prompt, automatically pick the first choice for all prompts
-q --quiet suppress output
-v --verbose enable additional output
--color TYPE when to colorize (boolean, always, auto, never, or debug)
--config CONFIG [+] set/override config option (use 'section.name=value')
--debug enable debugging output
--debugger start debugger
--encoding ENCODE set the charset encoding (default: ascii)
--encodingmode MODE set the charset encoding mode (default: strict)
--traceback always print a traceback on exception
--time time how long the command takes
--profile print command execution profile
--version output version information and exit
-h --help display help and exit
--hidden consider hidden changesets
--pager TYPE when to paginate (boolean, always, auto, or never) (default: auto)
$ get-with-headers.py $LOCALIP:$HGPORT "help/remove" 200 Script output follows Help: remove

Mercurial

Help: remove

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

hg remove [OPTION]... FILE...

aliases: rm

remove the specified files on the next commit

Schedule the indicated files for removal from the current branch.

This command schedules the files to be removed at the next commit. To undo a remove before that, see 'hg revert'. To undo added files, see 'hg forget'.

-A/--after can be used to remove only files that have already been deleted, -f/--force can be used to force deletion, and -Af can be used to remove files from the next revision without deleting them from the working directory.

The following table details the behavior of remove for different file states (columns) and option combinations (rows). The file states are Added [A], Clean [C], Modified [M] and Missing [!] (as reported by 'hg status'). The actions are Warn, Remove (from branch) and Delete (from disk):

opt/state A C M !
none W RD W R
-f R RD RD R
-A W W W R
-Af R R R R

Note:

'hg remove' never deletes files in Added [A] state from the working directory, not even if "--force" is specified.

Returns 0 on success, 1 if any warnings encountered.

options ([+] can be repeated):

-A --after record delete for missing files
-f --force forget added files, delete modified files
-S --subrepos recurse into subrepositories
-I --include PATTERN [+] include names matching the given patterns
-X --exclude PATTERN [+] exclude names matching the given patterns
-n --dry-run do not perform actions, just print output

global options ([+] can be repeated):

-R --repository REPO repository root directory or name of overlay bundle file
--cwd DIR change working directory
-y --noninteractive do not prompt, automatically pick the first choice for all prompts
-q --quiet suppress output
-v --verbose enable additional output
--color TYPE when to colorize (boolean, always, auto, never, or debug)
--config CONFIG [+] set/override config option (use 'section.name=value')
--debug enable debugging output
--debugger start debugger
--encoding ENCODE set the charset encoding (default: ascii)
--encodingmode MODE set the charset encoding mode (default: strict)
--traceback always print a traceback on exception
--time time how long the command takes
--profile print command execution profile
--version output version information and exit
-h --help display help and exit
--hidden consider hidden changesets
--pager TYPE when to paginate (boolean, always, auto, or never) (default: auto)
$ get-with-headers.py $LOCALIP:$HGPORT "help/dates" 200 Script output follows Help: dates

Mercurial

Help: dates

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

Date Formats

Some commands allow the user to specify a date, e.g.:

  • backout, commit, import, tag: Specify the commit date.
  • log, revert, update: Select revision(s) by date.

Many date formats are valid. Here are some examples:

  • "Wed Dec 6 13:18:29 2006" (local timezone assumed)
  • "Dec 6 13:18 -0600" (year assumed, time offset provided)
  • "Dec 6 13:18 UTC" (UTC and GMT are aliases for +0000)
  • "Dec 6" (midnight)
  • "13:18" (today assumed)
  • "3:39" (3:39AM assumed)
  • "3:39pm" (15:39)
  • "2006-12-06 13:18:29" (ISO 8601 format)
  • "2006-12-6 13:18"
  • "2006-12-6"
  • "12-6"
  • "12/6"
  • "12/6/6" (Dec 6 2006)
  • "today" (midnight)
  • "yesterday" (midnight)
  • "now" - right now

Lastly, there is Mercurial's internal format:

  • "1165411109 0" (Wed Dec 6 13:18:29 2006 UTC)

This is the internal representation format for dates. The first number is the number of seconds since the epoch (1970-01-01 00:00 UTC). The second is the offset of the local timezone, in seconds west of UTC (negative if the timezone is east of UTC).

The log command also accepts date ranges:

  • "<DATE" - at or before a given date/time
  • ">DATE" - on or after a given date/time
  • "DATE to DATE" - a date range, inclusive
  • "-DAYS" - within a given number of days from today
$ get-with-headers.py $LOCALIP:$HGPORT "help/pager" 200 Script output follows Help: pager

Mercurial

Help: pager

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

Pager Support

Some Mercurial commands can produce a lot of output, and Mercurial will attempt to use a pager to make those commands more pleasant.

To set the pager that should be used, set the application variable: 

  [pager]
  pager = less -FRX

If no pager is set in the user or repository configuration, Mercurial uses the environment variable $PAGER. If $PAGER is not set, pager.pager from the default or system configuration is used. If none of these are set, a default pager will be used, typically 'less' on Unix and 'more' on Windows.

You can disable the pager for certain commands by adding them to the pager.ignore list: 

  [pager]
  ignore = version, help, update

To ignore global commands like 'hg version' or 'hg help', you have to specify them in your user configuration file.

To control whether the pager is used at all for an individual command, you can use --pager=<value>:

  • use as needed: 'auto'.
  • require the pager: 'yes' or 'on'.
  • suppress the pager: 'no' or 'off' (any unrecognized value will also work).

To globally turn off all attempts to use a pager, set: 

  [ui]
  paginate = never

which will prevent the pager from running.

Sub-topic indexes rendered properly $ get-with-headers.py $LOCALIP:$HGPORT "help/internals" 200 Script output follows Help: internals

Mercurial

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

Topics

bid-merge Bid Merge Algorithm
bundle2 Bundle2
bundles Bundles
cbor CBOR
censor Censor
changegroups Changegroups
config Config Registrar
extensions Extension API
mergestate Mergestate
requirements Repository Requirements
revlogs Revision Logs
wireprotocol Wire Protocol
wireprotocolrpc Wire Protocol RPC
wireprotocolv2 Wire Protocol Version 2
Sub-topic topics rendered properly $ get-with-headers.py $LOCALIP:$HGPORT "help/internals.changegroups" 200 Script output follows Help: internals.changegroups

Mercurial

Help: internals.changegroups

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

Changegroups

Changegroups are representations of repository revlog data, specifically the changelog data, root/flat manifest data, treemanifest data, and filelogs.

There are 3 versions of changegroups: "1", "2", and "3". From a high-level, versions "1" and "2" are almost exactly the same, with the only difference being an additional item in the *delta header*. Version "3" adds support for storage flags in the *delta header* and optionally exchanging treemanifests (enabled by setting an option on the "changegroup" part in the bundle2).

Changegroups when not exchanging treemanifests consist of 3 logical segments: 

  +---------------------------------+
  |           |          |          |
  | changeset | manifest | filelogs |
  |           |          |          |
  |           |          |          |
  +---------------------------------+

When exchanging treemanifests, there are 4 logical segments: 

  +-------------------------------------------------+
  |           |          |               |          |
  | changeset |   root   | treemanifests | filelogs |
  |           | manifest |               |          |
  |           |          |               |          |
  +-------------------------------------------------+

The principle building block of each segment is a *chunk*. A *chunk* is a framed piece of data: 

  +---------------------------------------+
  |           |                           |
  |  length   |           data            |
  | (4 bytes) |   (<length - 4> bytes)    |
  |           |                           |
  +---------------------------------------+

All integers are big-endian signed integers. Each chunk starts with a 32-bit integer indicating the length of the entire chunk (including the length field itself).

There is a special case chunk that has a value of 0 for the length ("0x00000000"). We call this an *empty chunk*.

Delta Groups

A *delta group* expresses the content of a revlog as a series of deltas, or patches against previous revisions.

Delta groups consist of 0 or more *chunks* followed by the *empty chunk* to signal the end of the delta group: 

  +------------------------------------------------------------------------+
  |                |             |               |             |           |
  | chunk0 length  | chunk0 data | chunk1 length | chunk1 data |    0x0    |
  |   (4 bytes)    |  (various)  |   (4 bytes)   |  (various)  | (4 bytes) |
  |                |             |               |             |           |
  +------------------------------------------------------------------------+

Each *chunk*'s data consists of the following: 

  +---------------------------------------+
  |                        |              |
  |     delta header       |  delta data  |
  |  (various by version)  |  (various)   |
  |                        |              |
  +---------------------------------------+

The *delta data* is a series of *delta*s that describe a diff from an existing entry (either that the recipient already has, or previously specified in the bundle/changegroup).

The *delta header* is different between versions "1", "2", and "3" of the changegroup format.

Version 1 (headerlen=80): 

  +------------------------------------------------------+
  |            |             |             |             |
  |    node    |   p1 node   |   p2 node   |  link node  |
  | (20 bytes) |  (20 bytes) |  (20 bytes) |  (20 bytes) |
  |            |             |             |             |
  +------------------------------------------------------+

Version 2 (headerlen=100): 

  +------------------------------------------------------------------+
  |            |             |             |            |            |
  |    node    |   p1 node   |   p2 node   | base node  | link node  |
  | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) |
  |            |             |             |            |            |
  +------------------------------------------------------------------+

Version 3 (headerlen=102): 

  +------------------------------------------------------------------------------+
  |            |             |             |            |            |           |
  |    node    |   p1 node   |   p2 node   | base node  | link node  |   flags   |
  | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) | (2 bytes) |
  |            |             |             |            |            |           |
  +------------------------------------------------------------------------------+

The *delta data* consists of "chunklen - 4 - headerlen" bytes, which contain a series of *delta*s, densely packed (no separators). These deltas describe a diff from an existing entry (either that the recipient already has, or previously specified in the bundle/changegroup). The format is described more fully in "hg help internals.bdiff", but briefly: 

  +---------------------------------------------------------------+
  |              |            |            |                      |
  | start offset | end offset | new length |        content       |
  |  (4 bytes)   |  (4 bytes) |  (4 bytes) | (<new length> bytes) |
  |              |            |            |                      |
  +---------------------------------------------------------------+

Please note that the length field in the delta data does *not* include itself.

In version 1, the delta is always applied against the previous node from the changegroup or the first parent if this is the first entry in the changegroup.

In version 2 and up, the delta base node is encoded in the entry in the changegroup. This allows the delta to be expressed against any parent, which can result in smaller deltas and more efficient encoding of data.

The *flags* field holds bitwise flags affecting the processing of revision data. The following flags are defined:

32768
Censored revision. The revision's fulltext has been replaced by censor metadata. May only occur on file revisions.
16384
Ellipsis revision. Revision hash does not match data (likely due to rewritten parents).
8192
Externally stored. The revision fulltext contains "key:value" "\n" delimited metadata defining an object stored elsewhere. Used by the LFS extension.

For historical reasons, the integer values are identical to revlog version 1 per-revision storage flags and correspond to bits being set in this 2-byte field. Bits were allocated starting from the most-significant bit, hence the reverse ordering and allocation of these flags.

Changeset Segment

The *changeset segment* consists of a single *delta group* holding changelog data. The *empty chunk* at the end of the *delta group* denotes the boundary to the *manifest segment*.

Manifest Segment

The *manifest segment* consists of a single *delta group* holding manifest data. If treemanifests are in use, it contains only the manifest for the root directory of the repository. Otherwise, it contains the entire manifest data. The *empty chunk* at the end of the *delta group* denotes the boundary to the next segment (either the *treemanifests segment* or the *filelogs segment*, depending on version and the request options).

Treemanifests Segment

The *treemanifests segment* only exists in changegroup version "3", and only if the 'treemanifest' param is part of the bundle2 changegroup part (it is not possible to use changegroup version 3 outside of bundle2). Aside from the filenames in the *treemanifests segment* containing a trailing "/" character, it behaves identically to the *filelogs segment* (see below). The final sub-segment is followed by an *empty chunk* (logically, a sub-segment with filename size 0). This denotes the boundary to the *filelogs segment*.

Filelogs Segment

The *filelogs segment* consists of multiple sub-segments, each corresponding to an individual file whose data is being described: 

  +--------------------------------------------------+
  |          |          |          |     |           |
  | filelog0 | filelog1 | filelog2 | ... |    0x0    |
  |          |          |          |     | (4 bytes) |
  |          |          |          |     |           |
  +--------------------------------------------------+

The final filelog sub-segment is followed by an *empty chunk* (logically, a sub-segment with filename size 0). This denotes the end of the segment and of the overall changegroup.

Each filelog sub-segment consists of the following: 

  +------------------------------------------------------+
  |                 |                      |             |
  | filename length |       filename       | delta group |
  |    (4 bytes)    | (<length - 4> bytes) |  (various)  |
  |                 |                      |             |
  +------------------------------------------------------+

That is, a *chunk* consisting of the filename (not terminated or padded) followed by N chunks constituting the *delta group* for this file. The *empty chunk* at the end of each *delta group* denotes the boundary to the next filelog sub-segment.

$ get-with-headers.py 127.0.0.1:$HGPORT "help/unknowntopic" 404 Not Found test: error

Mercurial

error

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.

An error occurred while processing your request:

Not Found

[1] $ killdaemons.py #endif