# upgrade.py - functions for in place upgrade of Mercurial repository # # Copyright (c) 2016-present, Gregory Szorc # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from ..i18n import _ from .. import ( error, localrepo, pycompat, requirements, revlog, util, ) from ..utils import compression if pycompat.TYPE_CHECKING: from typing import ( List, Type, ) # list of requirements that request a clone of all revlog if added/removed RECLONES_REQUIREMENTS = { requirements.GENERALDELTA_REQUIREMENT, requirements.SPARSEREVLOG_REQUIREMENT, requirements.REVLOGV2_REQUIREMENT, requirements.CHANGELOGV2_REQUIREMENT, } def preservedrequirements(repo): preserved = { requirements.SHARED_REQUIREMENT, requirements.NARROW_REQUIREMENT, } return preserved & repo.requirements FORMAT_VARIANT = b'deficiency' OPTIMISATION = b'optimization' class improvement: """Represents an improvement that can be made as part of an upgrade.""" ### The following attributes should be defined for each subclass: # Either ``FORMAT_VARIANT`` or ``OPTIMISATION``. # A format variant is where we change the storage format. Not all format # variant changes are an obvious problem. # An optimization is an action (sometimes optional) that # can be taken to further improve the state of the repository. type = None # machine-readable string uniquely identifying this improvement. it will be # mapped to an action later in the upgrade process. name = None # message intended for humans explaining the improvement in more detail, # including the implications of it ``FORMAT_VARIANT`` types, should be # worded # in the present tense. description = None # message intended for humans explaining what an upgrade addressing this # issue will do. should be worded in the future tense. upgrademessage = None # value of current Mercurial default for new repository default = None # Message intended for humans which will be shown post an upgrade # operation when the improvement will be added postupgrademessage = None # Message intended for humans which will be shown post an upgrade # operation in which this improvement was removed postdowngrademessage = None # By default we assume that every improvement touches requirements and all revlogs # Whether this improvement touches filelogs touches_filelogs = True # Whether this improvement touches manifests touches_manifests = True # Whether this improvement touches changelog touches_changelog = True # Whether this improvement changes repository requirements touches_requirements = True # Whether this improvement touches the dirstate touches_dirstate = False # Can this action be run on a share instead of its mains repository compatible_with_share = False allformatvariant = [] # type: List[Type['formatvariant']] def registerformatvariant(cls): allformatvariant.append(cls) return cls class formatvariant(improvement): """an improvement subclass dedicated to repository format""" type = FORMAT_VARIANT @staticmethod def fromrepo(repo): """current value of the variant in the repository""" raise NotImplementedError() @staticmethod def fromconfig(repo): """current value of the variant in the configuration""" raise NotImplementedError() class requirementformatvariant(formatvariant): """formatvariant based on a 'requirement' name. Many format variant are controlled by a 'requirement'. We define a small subclass to factor the code. """ # the requirement that control this format variant _requirement = None @staticmethod def _newreporequirements(ui): return localrepo.newreporequirements( ui, localrepo.defaultcreateopts(ui) ) @classmethod def fromrepo(cls, repo): assert cls._requirement is not None return cls._requirement in repo.requirements @classmethod def fromconfig(cls, repo): assert cls._requirement is not None return cls._requirement in cls._newreporequirements(repo.ui) @registerformatvariant class fncache(requirementformatvariant): name = b'fncache' _requirement = requirements.FNCACHE_REQUIREMENT default = True description = _( b'long and reserved filenames may not work correctly; ' b'repository performance is sub-optimal' ) upgrademessage = _( b'repository will be more resilient to storing ' b'certain paths and performance of certain ' b'operations should be improved' ) @registerformatvariant class dirstatev2(requirementformatvariant): name = b'dirstate-v2' _requirement = requirements.DIRSTATE_V2_REQUIREMENT default = False description = _( b'version 1 of the dirstate file format requires ' b'reading and parsing it all at once.\n' b'Version 2 has a better structure,' b'better information and lighter update mechanism' ) upgrademessage = _(b'"hg status" will be faster') touches_filelogs = False touches_manifests = False touches_changelog = False touches_requirements = True touches_dirstate = True compatible_with_share = True @registerformatvariant class dirstatetrackedkey(requirementformatvariant): name = b'tracked-hint' _requirement = requirements.DIRSTATE_TRACKED_HINT_V1 default = False description = _( b'Add a small file to help external tooling that watch the tracked set' ) upgrademessage = _( b'external tools will be informated of potential change in the tracked set' ) touches_filelogs = False touches_manifests = False touches_changelog = False touches_requirements = True touches_dirstate = True compatible_with_share = True @registerformatvariant class dotencode(requirementformatvariant): name = b'dotencode' _requirement = requirements.DOTENCODE_REQUIREMENT default = True description = _( b'storage of filenames beginning with a period or ' b'space may not work correctly' ) upgrademessage = _( b'repository will be better able to store files ' b'beginning with a space or period' ) @registerformatvariant class generaldelta(requirementformatvariant): name = b'generaldelta' _requirement = requirements.GENERALDELTA_REQUIREMENT default = True description = _( b'deltas within internal storage are unable to ' b'choose optimal revisions; repository is larger and ' b'slower than it could be; interaction with other ' b'repositories may require extra network and CPU ' b'resources, making "hg push" and "hg pull" slower' ) upgrademessage = _( b'repository storage will be able to create ' b'optimal deltas; new repository data will be ' b'smaller and read times should decrease; ' b'interacting with other repositories using this ' b'storage model should require less network and ' b'CPU resources, making "hg push" and "hg pull" ' b'faster' ) @registerformatvariant class sharesafe(requirementformatvariant): name = b'share-safe' _requirement = requirements.SHARESAFE_REQUIREMENT default = True description = _( b'old shared repositories do not share source repository ' b'requirements and config. This leads to various problems ' b'when the source repository format is upgraded or some new ' b'extensions are enabled.' ) upgrademessage = _( b'Upgrades a repository to share-safe format so that future ' b'shares of this repository share its requirements and configs.' ) postdowngrademessage = _( b'repository downgraded to not use share safe mode, ' b'existing shares will not work and needs to' b' be reshared.' ) postupgrademessage = _( b'repository upgraded to share safe mode, existing' b' shares will still work in old non-safe mode. ' b'Re-share existing shares to use them in safe mode' b' New shares will be created in safe mode.' ) # upgrade only needs to change the requirements touches_filelogs = False touches_manifests = False touches_changelog = False touches_requirements = True @registerformatvariant class sparserevlog(requirementformatvariant): name = b'sparserevlog' _requirement = requirements.SPARSEREVLOG_REQUIREMENT default = True description = _( b'in order to limit disk reading and memory usage on older ' b'version, the span of a delta chain from its root to its ' b'end is limited, whatever the relevant data in this span. ' b'This can severly limit Mercurial ability to build good ' b'chain of delta resulting is much more storage space being ' b'taken and limit reusability of on disk delta during ' b'exchange.' ) upgrademessage = _( b'Revlog supports delta chain with more unused data ' b'between payload. These gaps will be skipped at read ' b'time. This allows for better delta chains, making a ' b'better compression and faster exchange with server.' ) @registerformatvariant class persistentnodemap(requirementformatvariant): name = b'persistent-nodemap' _requirement = requirements.NODEMAP_REQUIREMENT default = False description = _( b'persist the node -> rev mapping on disk to speedup lookup' ) upgrademessage = _(b'Speedup revision lookup by node id.') @registerformatvariant class copiessdc(requirementformatvariant): name = b'copies-sdc' _requirement = requirements.COPIESSDC_REQUIREMENT default = False description = _(b'Stores copies information alongside changesets.') upgrademessage = _( b'Allows to use more efficient algorithm to deal with ' b'copy tracing.' ) touches_filelogs = False touches_manifests = False @registerformatvariant class revlogv2(requirementformatvariant): name = b'revlog-v2' _requirement = requirements.REVLOGV2_REQUIREMENT default = False description = _(b'Version 2 of the revlog.') upgrademessage = _(b'very experimental') @registerformatvariant class changelogv2(requirementformatvariant): name = b'changelog-v2' _requirement = requirements.CHANGELOGV2_REQUIREMENT default = False description = _(b'An iteration of the revlog focussed on changelog needs.') upgrademessage = _(b'quite experimental') touches_filelogs = False touches_manifests = False @registerformatvariant class removecldeltachain(formatvariant): name = b'plain-cl-delta' default = True description = _( b'changelog storage is using deltas instead of ' b'raw entries; changelog reading and any ' b'operation relying on changelog data are slower ' b'than they could be' ) upgrademessage = _( b'changelog storage will be reformated to ' b'store raw entries; changelog reading will be ' b'faster; changelog size may be reduced' ) @staticmethod def fromrepo(repo): # Mercurial 4.0 changed changelogs to not use delta chains. Search for # changelogs with deltas. cl = repo.changelog chainbase = cl.chainbase return all(rev == chainbase(rev) for rev in cl) @staticmethod def fromconfig(repo): return True _has_zstd = ( b'zstd' in util.compengines and util.compengines[b'zstd'].available() and util.compengines[b'zstd'].revlogheader() ) @registerformatvariant class compressionengine(formatvariant): name = b'compression' if _has_zstd: default = b'zstd' else: default = b'zlib' description = _( b'Compresion algorithm used to compress data. ' b'Some engine are faster than other' ) upgrademessage = _( b'revlog content will be recompressed with the new algorithm.' ) @classmethod def fromrepo(cls, repo): # we allow multiple compression engine requirement to co-exist because # strickly speaking, revlog seems to support mixed compression style. # # The compression used for new entries will be "the last one" compression = b'zlib' for req in repo.requirements: prefix = req.startswith if prefix(b'revlog-compression-') or prefix(b'exp-compression-'): compression = req.split(b'-', 2)[2] return compression @classmethod def fromconfig(cls, repo): compengines = repo.ui.configlist(b'format', b'revlog-compression') # return the first valid value as the selection code would do for comp in compengines: if comp in util.compengines: e = util.compengines[comp] if e.available() and e.revlogheader(): return comp # no valide compression found lets display it all for clarity return b','.join(compengines) @registerformatvariant class compressionlevel(formatvariant): name = b'compression-level' default = b'default' description = _(b'compression level') upgrademessage = _(b'revlog content will be recompressed') @classmethod def fromrepo(cls, repo): comp = compressionengine.fromrepo(repo) level = None if comp == b'zlib': level = repo.ui.configint(b'storage', b'revlog.zlib.level') elif comp == b'zstd': level = repo.ui.configint(b'storage', b'revlog.zstd.level') if level is None: return b'default' return bytes(level) @classmethod def fromconfig(cls, repo): comp = compressionengine.fromconfig(repo) level = None if comp == b'zlib': level = repo.ui.configint(b'storage', b'revlog.zlib.level') elif comp == b'zstd': level = repo.ui.configint(b'storage', b'revlog.zstd.level') if level is None: return b'default' return bytes(level) def find_format_upgrades(repo): """returns a list of format upgrades which can be perform on the repo""" upgrades = [] # We could detect lack of revlogv1 and store here, but they were added # in 0.9.2 and we don't support upgrading repos without these # requirements, so let's not bother. for fv in allformatvariant: if not fv.fromrepo(repo): upgrades.append(fv) return upgrades def find_format_downgrades(repo): """returns a list of format downgrades which will be performed on the repo because of disabled config option for them""" downgrades = [] for fv in allformatvariant: if fv.name == b'compression': # If there is a compression change between repository # and config, destination repository compression will change # and current compression will be removed. if fv.fromrepo(repo) != fv.fromconfig(repo): downgrades.append(fv) continue # format variant exist in repo but does not exist in new repository # config if fv.fromrepo(repo) and not fv.fromconfig(repo): downgrades.append(fv) return downgrades ALL_OPTIMISATIONS = [] def register_optimization(obj): ALL_OPTIMISATIONS.append(obj) return obj class optimization(improvement): """an improvement subclass dedicated to optimizations""" type = OPTIMISATION @register_optimization class redeltaparents(optimization): name = b're-delta-parent' type = OPTIMISATION description = _( b'deltas within internal storage will be recalculated to ' b'choose an optimal base revision where this was not ' b'already done; the size of the repository may shrink and ' b'various operations may become faster; the first time ' b'this optimization is performed could slow down upgrade ' b'execution considerably; subsequent invocations should ' b'not run noticeably slower' ) upgrademessage = _( b'deltas within internal storage will choose a new ' b'base revision if needed' ) @register_optimization class redeltamultibase(optimization): name = b're-delta-multibase' type = OPTIMISATION description = _( b'deltas within internal storage will be recalculated ' b'against multiple base revision and the smallest ' b'difference will be used; the size of the repository may ' b'shrink significantly when there are many merges; this ' b'optimization will slow down execution in proportion to ' b'the number of merges in the repository and the amount ' b'of files in the repository; this slow down should not ' b'be significant unless there are tens of thousands of ' b'files and thousands of merges' ) upgrademessage = _( b'deltas within internal storage will choose an ' b'optimal delta by computing deltas against multiple ' b'parents; may slow down execution time ' b'significantly' ) @register_optimization class redeltaall(optimization): name = b're-delta-all' type = OPTIMISATION description = _( b'deltas within internal storage will always be ' b'recalculated without reusing prior deltas; this will ' b'likely make execution run several times slower; this ' b'optimization is typically not needed' ) upgrademessage = _( b'deltas within internal storage will be fully ' b'recomputed; this will likely drastically slow down ' b'execution time' ) @register_optimization class redeltafulladd(optimization): name = b're-delta-fulladd' type = OPTIMISATION description = _( b'every revision will be re-added as if it was new ' b'content. It will go through the full storage ' b'mechanism giving extensions a chance to process it ' b'(eg. lfs). This is similar to "re-delta-all" but even ' b'slower since more logic is involved.' ) upgrademessage = _( b'each revision will be added as new content to the ' b'internal storage; this will likely drastically slow ' b'down execution time, but some extensions might need ' b'it' ) def findoptimizations(repo): """Determine optimisation that could be used during upgrade""" # These are unconditionally added. There is logic later that figures out # which ones to apply. return list(ALL_OPTIMISATIONS) def determine_upgrade_actions( repo, format_upgrades, optimizations, sourcereqs, destreqs ): """Determine upgrade actions that will be performed. Given a list of improvements as returned by ``find_format_upgrades`` and ``findoptimizations``, determine the list of upgrade actions that will be performed. The role of this function is to filter improvements if needed, apply recommended optimizations from the improvements list that make sense, etc. Returns a list of action names. """ newactions = [] for d in format_upgrades: if util.safehasattr(d, '_requirement'): name = d._requirement else: name = None # If the action is a requirement that doesn't show up in the # destination requirements, prune the action. if name is not None and name not in destreqs: continue newactions.append(d) newactions.extend( o for o in sorted(optimizations, key=(lambda x: x.name)) if o not in newactions ) # FUTURE consider adding some optimizations here for certain transitions. # e.g. adding generaldelta could schedule parent redeltas. return newactions class BaseOperation: """base class that contains the minimum for an upgrade to work (this might need to be extended as the usage for subclass alternative to UpgradeOperation extends) """ def __init__( self, new_requirements, backup_store, ): self.new_requirements = new_requirements # should this operation create a backup of the store self.backup_store = backup_store class UpgradeOperation(BaseOperation): """represent the work to be done during an upgrade""" def __init__( self, ui, new_requirements, current_requirements, upgrade_actions, removed_actions, revlogs_to_process, backup_store, ): super().__init__( new_requirements, backup_store, ) self.ui = ui self.current_requirements = current_requirements # list of upgrade actions the operation will perform self.upgrade_actions = upgrade_actions self.removed_actions = removed_actions self.revlogs_to_process = revlogs_to_process # requirements which will be added by the operation self._added_requirements = ( self.new_requirements - self.current_requirements ) # requirements which will be removed by the operation self._removed_requirements = ( self.current_requirements - self.new_requirements ) # requirements which will be preserved by the operation self._preserved_requirements = ( self.current_requirements & self.new_requirements ) # optimizations which are not used and it's recommended that they # should use them all_optimizations = findoptimizations(None) self.unused_optimizations = [ i for i in all_optimizations if i not in self.upgrade_actions ] # delta reuse mode of this upgrade operation upgrade_actions_names = self.upgrade_actions_names self.delta_reuse_mode = revlog.revlog.DELTAREUSEALWAYS if b're-delta-all' in upgrade_actions_names: self.delta_reuse_mode = revlog.revlog.DELTAREUSENEVER elif b're-delta-parent' in upgrade_actions_names: self.delta_reuse_mode = revlog.revlog.DELTAREUSESAMEREVS elif b're-delta-multibase' in upgrade_actions_names: self.delta_reuse_mode = revlog.revlog.DELTAREUSESAMEREVS elif b're-delta-fulladd' in upgrade_actions_names: self.delta_reuse_mode = revlog.revlog.DELTAREUSEFULLADD # should this operation force re-delta of both parents self.force_re_delta_both_parents = ( b're-delta-multibase' in upgrade_actions_names ) @property def upgrade_actions_names(self): return set([a.name for a in self.upgrade_actions]) @property def requirements_only(self): # does the operation only touches repository requirement return ( self.touches_requirements and not self.touches_filelogs and not self.touches_manifests and not self.touches_changelog and not self.touches_dirstate ) @property def touches_filelogs(self): for a in self.upgrade_actions: # in optimisations, we re-process the revlogs again if a.type == OPTIMISATION: return True elif a.touches_filelogs: return True for a in self.removed_actions: if a.touches_filelogs: return True return False @property def touches_manifests(self): for a in self.upgrade_actions: # in optimisations, we re-process the revlogs again if a.type == OPTIMISATION: return True elif a.touches_manifests: return True for a in self.removed_actions: if a.touches_manifests: return True return False @property def touches_changelog(self): for a in self.upgrade_actions: # in optimisations, we re-process the revlogs again if a.type == OPTIMISATION: return True elif a.touches_changelog: return True for a in self.removed_actions: if a.touches_changelog: return True return False @property def touches_requirements(self): for a in self.upgrade_actions: # optimisations are used to re-process revlogs and does not result # in a requirement being added or removed if a.type == OPTIMISATION: pass elif a.touches_requirements: return True for a in self.removed_actions: if a.touches_requirements: return True @property def touches_dirstate(self): for a in self.upgrade_actions: # revlog optimisations do not affect the dirstate if a.type == OPTIMISATION: pass elif a.touches_dirstate: return True for a in self.removed_actions: if a.touches_dirstate: return True return False def _write_labeled(self, l, label): """ Utility function to aid writing of a list under one label """ first = True for r in sorted(l): if not first: self.ui.write(b', ') self.ui.write(r, label=label) first = False def print_requirements(self): self.ui.write(_(b'requirements\n')) self.ui.write(_(b' preserved: ')) self._write_labeled( self._preserved_requirements, "upgrade-repo.requirement.preserved" ) self.ui.write((b'\n')) if self._removed_requirements: self.ui.write(_(b' removed: ')) self._write_labeled( self._removed_requirements, "upgrade-repo.requirement.removed" ) self.ui.write((b'\n')) if self._added_requirements: self.ui.write(_(b' added: ')) self._write_labeled( self._added_requirements, "upgrade-repo.requirement.added" ) self.ui.write((b'\n')) self.ui.write(b'\n') def print_optimisations(self): optimisations = [ a for a in self.upgrade_actions if a.type == OPTIMISATION ] optimisations.sort(key=lambda a: a.name) if optimisations: self.ui.write(_(b'optimisations: ')) self._write_labeled( [a.name for a in optimisations], "upgrade-repo.optimisation.performed", ) self.ui.write(b'\n\n') def print_upgrade_actions(self): for a in self.upgrade_actions: self.ui.status(b'%s\n %s\n\n' % (a.name, a.upgrademessage)) def print_affected_revlogs(self): if not self.revlogs_to_process: self.ui.write((b'no revlogs to process\n')) else: self.ui.write((b'processed revlogs:\n')) for r in sorted(self.revlogs_to_process): self.ui.write((b' - %s\n' % r)) self.ui.write((b'\n')) def print_unused_optimizations(self): for i in self.unused_optimizations: self.ui.status(_(b'%s\n %s\n\n') % (i.name, i.description)) def has_upgrade_action(self, name): """Check whether the upgrade operation will perform this action""" return name in self._upgrade_actions_names def print_post_op_messages(self): """print post upgrade operation warning messages""" for a in self.upgrade_actions: if a.postupgrademessage is not None: self.ui.warn(b'%s\n' % a.postupgrademessage) for a in self.removed_actions: if a.postdowngrademessage is not None: self.ui.warn(b'%s\n' % a.postdowngrademessage) ### Code checking if a repository can got through the upgrade process at all. # def requiredsourcerequirements(repo): """Obtain requirements required to be present to upgrade a repo. An upgrade will not be allowed if the repository doesn't have the requirements returned by this function. """ return { # Introduced in Mercurial 0.9.2. requirements.STORE_REQUIREMENT, } def blocksourcerequirements(repo): """Obtain requirements that will prevent an upgrade from occurring. An upgrade cannot be performed if the source repository contains a requirements in the returned set. """ return { # The upgrade code does not yet support these experimental features. # This is an artificial limitation. requirements.TREEMANIFEST_REQUIREMENT, # This was a precursor to generaldelta and was never enabled by default. # It should (hopefully) not exist in the wild. b'parentdelta', } def check_revlog_version(reqs): """Check that the requirements contain at least one Revlog version""" all_revlogs = { requirements.REVLOGV1_REQUIREMENT, requirements.REVLOGV2_REQUIREMENT, } if not all_revlogs.intersection(reqs): msg = _(b'cannot upgrade repository; missing a revlog version') raise error.Abort(msg) def check_source_requirements(repo): """Ensure that no existing requirements prevent the repository upgrade""" check_revlog_version(repo.requirements) required = requiredsourcerequirements(repo) missingreqs = required - repo.requirements if missingreqs: msg = _(b'cannot upgrade repository; requirement missing: %s') missingreqs = b', '.join(sorted(missingreqs)) raise error.Abort(msg % missingreqs) blocking = blocksourcerequirements(repo) blockingreqs = blocking & repo.requirements if blockingreqs: m = _(b'cannot upgrade repository; unsupported source requirement: %s') blockingreqs = b', '.join(sorted(blockingreqs)) raise error.Abort(m % blockingreqs) # Upgrade should operate on the actual store, not the shared link. bad_share = ( requirements.SHARED_REQUIREMENT in repo.requirements and requirements.SHARESAFE_REQUIREMENT not in repo.requirements ) if bad_share: m = _(b'cannot upgrade repository; share repository without share-safe') h = _(b'check :hg:`help config.format.use-share-safe`') raise error.Abort(m, hint=h) ### Verify the validity of the planned requirement changes #################### def supportremovedrequirements(repo): """Obtain requirements that can be removed during an upgrade. If an upgrade were to create a repository that dropped a requirement, the dropped requirement must appear in the returned set for the upgrade to be allowed. """ supported = { requirements.SPARSEREVLOG_REQUIREMENT, requirements.COPIESSDC_REQUIREMENT, requirements.NODEMAP_REQUIREMENT, requirements.SHARESAFE_REQUIREMENT, requirements.REVLOGV2_REQUIREMENT, requirements.CHANGELOGV2_REQUIREMENT, requirements.REVLOGV1_REQUIREMENT, requirements.DIRSTATE_TRACKED_HINT_V1, requirements.DIRSTATE_V2_REQUIREMENT, } for name in compression.compengines: engine = compression.compengines[name] if engine.available() and engine.revlogheader(): supported.add(b'exp-compression-%s' % name) if engine.name() == b'zstd': supported.add(b'revlog-compression-zstd') return supported def supporteddestrequirements(repo): """Obtain requirements that upgrade supports in the destination. If the result of the upgrade would have requirements not in this set, the upgrade is disallowed. Extensions should monkeypatch this to add their custom requirements. """ supported = { requirements.CHANGELOGV2_REQUIREMENT, requirements.COPIESSDC_REQUIREMENT, requirements.DIRSTATE_TRACKED_HINT_V1, requirements.DIRSTATE_V2_REQUIREMENT, requirements.DOTENCODE_REQUIREMENT, requirements.FNCACHE_REQUIREMENT, requirements.GENERALDELTA_REQUIREMENT, requirements.NODEMAP_REQUIREMENT, requirements.REVLOGV1_REQUIREMENT, # allowed in case of downgrade requirements.REVLOGV2_REQUIREMENT, requirements.SHARED_REQUIREMENT, requirements.SHARESAFE_REQUIREMENT, requirements.SPARSEREVLOG_REQUIREMENT, requirements.STORE_REQUIREMENT, requirements.NARROW_REQUIREMENT, } for name in compression.compengines: engine = compression.compengines[name] if engine.available() and engine.revlogheader(): supported.add(b'exp-compression-%s' % name) if engine.name() == b'zstd': supported.add(b'revlog-compression-zstd') return supported def allowednewrequirements(repo): """Obtain requirements that can be added to a repository during upgrade. This is used to disallow proposed requirements from being added when they weren't present before. We use a list of allowed requirement additions instead of a list of known bad additions because the whitelist approach is safer and will prevent future, unknown requirements from accidentally being added. """ supported = { requirements.DOTENCODE_REQUIREMENT, requirements.FNCACHE_REQUIREMENT, requirements.GENERALDELTA_REQUIREMENT, requirements.SPARSEREVLOG_REQUIREMENT, requirements.COPIESSDC_REQUIREMENT, requirements.NODEMAP_REQUIREMENT, requirements.SHARESAFE_REQUIREMENT, requirements.REVLOGV1_REQUIREMENT, requirements.REVLOGV2_REQUIREMENT, requirements.CHANGELOGV2_REQUIREMENT, requirements.DIRSTATE_TRACKED_HINT_V1, requirements.DIRSTATE_V2_REQUIREMENT, } for name in compression.compengines: engine = compression.compengines[name] if engine.available() and engine.revlogheader(): supported.add(b'exp-compression-%s' % name) if engine.name() == b'zstd': supported.add(b'revlog-compression-zstd') return supported def check_requirements_changes(repo, new_reqs): old_reqs = repo.requirements check_revlog_version(repo.requirements) support_removal = supportremovedrequirements(repo) no_remove_reqs = old_reqs - new_reqs - support_removal if no_remove_reqs: msg = _(b'cannot upgrade repository; requirement would be removed: %s') no_remove_reqs = b', '.join(sorted(no_remove_reqs)) raise error.Abort(msg % no_remove_reqs) support_addition = allowednewrequirements(repo) no_add_reqs = new_reqs - old_reqs - support_addition if no_add_reqs: m = _(b'cannot upgrade repository; do not support adding requirement: ') no_add_reqs = b', '.join(sorted(no_add_reqs)) raise error.Abort(m + no_add_reqs) supported = supporteddestrequirements(repo) unsupported_reqs = new_reqs - supported if unsupported_reqs: msg = _( b'cannot upgrade repository; do not support destination ' b'requirement: %s' ) unsupported_reqs = b', '.join(sorted(unsupported_reqs)) raise error.Abort(msg % unsupported_reqs)