# changegroup.py - Mercurial changegroup manipulation functions # # Copyright 2006 Matt Mackall # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import import os import struct import tempfile import weakref from .i18n import _ from .node import ( hex, nullid, nullrev, short, ) from . import ( branchmap, dagutil, discovery, error, mdiff, phases, util, ) _CHANGEGROUPV1_DELTA_HEADER = "20s20s20s20s" _CHANGEGROUPV2_DELTA_HEADER = "20s20s20s20s20s" def readexactly(stream, n): '''read n bytes from stream.read and abort if less was available''' s = stream.read(n) if len(s) < n: raise error.Abort(_("stream ended unexpectedly" " (got %d bytes, expected %d)") % (len(s), n)) return s def getchunk(stream): """return the next chunk from stream as a string""" d = readexactly(stream, 4) l = struct.unpack(">l", d)[0] if l <= 4: if l: raise error.Abort(_("invalid chunk length %d") % l) return "" return readexactly(stream, l - 4) def chunkheader(length): """return a changegroup chunk header (string)""" return struct.pack(">l", length + 4) def closechunk(): """return a changegroup chunk header (string) for a zero-length chunk""" return struct.pack(">l", 0) def combineresults(results): """logic to combine 0 or more addchangegroup results into one""" changedheads = 0 result = 1 for ret in results: # If any changegroup result is 0, return 0 if ret == 0: result = 0 break if ret < -1: changedheads += ret + 1 elif ret > 1: changedheads += ret - 1 if changedheads > 0: result = 1 + changedheads elif changedheads < 0: result = -1 + changedheads return result bundletypes = { "": ("", None), # only when using unbundle on ssh and old http servers # since the unification ssh accepts a header but there # is no capability signaling it. "HG20": (), # special-cased below "HG10UN": ("HG10UN", None), "HG10BZ": ("HG10", 'BZ'), "HG10GZ": ("HG10GZ", 'GZ'), } # hgweb uses this list to communicate its preferred type bundlepriority = ['HG10GZ', 'HG10BZ', 'HG10UN'] def writechunks(ui, chunks, filename, vfs=None): """Write chunks to a file and return its filename. The stream is assumed to be a bundle file. Existing files will not be overwritten. If no filename is specified, a temporary file is created. """ fh = None cleanup = None try: if filename: if vfs: fh = vfs.open(filename, "wb") else: fh = open(filename, "wb") else: fd, filename = tempfile.mkstemp(prefix="hg-bundle-", suffix=".hg") fh = os.fdopen(fd, "wb") cleanup = filename for c in chunks: fh.write(c) cleanup = None return filename finally: if fh is not None: fh.close() if cleanup is not None: if filename and vfs: vfs.unlink(cleanup) else: os.unlink(cleanup) def writebundle(ui, cg, filename, bundletype, vfs=None, compression=None): """Write a bundle file and return its filename. Existing files will not be overwritten. If no filename is specified, a temporary file is created. bz2 compression can be turned off. The bundle file will be deleted in case of errors. """ if bundletype == "HG20": from . import bundle2 bundle = bundle2.bundle20(ui) bundle.setcompression(compression) part = bundle.newpart('changegroup', data=cg.getchunks()) part.addparam('version', cg.version) chunkiter = bundle.getchunks() else: # compression argument is only for the bundle2 case assert compression is None if cg.version != '01': raise error.Abort(_('old bundle types only supports v1 ' 'changegroups')) header, comp = bundletypes[bundletype] if comp not in util.compressors: raise error.Abort(_('unknown stream compression type: %s') % comp) z = util.compressors[comp]() subchunkiter = cg.getchunks() def chunkiter(): yield header for chunk in subchunkiter: yield z.compress(chunk) yield z.flush() chunkiter = chunkiter() # parse the changegroup data, otherwise we will block # in case of sshrepo because we don't know the end of the stream # an empty chunkgroup is the end of the changegroup # a changegroup has at least 2 chunkgroups (changelog and manifest). # after that, an empty chunkgroup is the end of the changegroup return writechunks(ui, chunkiter, filename, vfs=vfs) class cg1unpacker(object): """Unpacker for cg1 changegroup streams. A changegroup unpacker handles the framing of the revision data in the wire format. Most consumers will want to use the apply() method to add the changes from the changegroup to a repository. If you're forwarding a changegroup unmodified to another consumer, use getchunks(), which returns an iterator of changegroup chunks. This is mostly useful for cases where you need to know the data stream has ended by observing the end of the changegroup. deltachunk() is useful only if you're applying delta data. Most consumers should prefer apply() instead. A few other public methods exist. Those are used only for bundlerepo and some debug commands - their use is discouraged. """ deltaheader = _CHANGEGROUPV1_DELTA_HEADER deltaheadersize = struct.calcsize(deltaheader) version = '01' def __init__(self, fh, alg): if alg == 'UN': alg = None # get more modern without breaking too much if not alg in util.decompressors: raise error.Abort(_('unknown stream compression type: %s') % alg) if alg == 'BZ': alg = '_truncatedBZ' self._stream = util.decompressors[alg](fh) self._type = alg self.callback = None # These methods (compressed, read, seek, tell) all appear to only # be used by bundlerepo, but it's a little hard to tell. def compressed(self): return self._type is not None def read(self, l): return self._stream.read(l) def seek(self, pos): return self._stream.seek(pos) def tell(self): return self._stream.tell() def close(self): return self._stream.close() def _chunklength(self): d = readexactly(self._stream, 4) l = struct.unpack(">l", d)[0] if l <= 4: if l: raise error.Abort(_("invalid chunk length %d") % l) return 0 if self.callback: self.callback() return l - 4 def changelogheader(self): """v10 does not have a changelog header chunk""" return {} def manifestheader(self): """v10 does not have a manifest header chunk""" return {} def filelogheader(self): """return the header of the filelogs chunk, v10 only has the filename""" l = self._chunklength() if not l: return {} fname = readexactly(self._stream, l) return {'filename': fname} def _deltaheader(self, headertuple, prevnode): node, p1, p2, cs = headertuple if prevnode is None: deltabase = p1 else: deltabase = prevnode return node, p1, p2, deltabase, cs def deltachunk(self, prevnode): l = self._chunklength() if not l: return {} headerdata = readexactly(self._stream, self.deltaheadersize) header = struct.unpack(self.deltaheader, headerdata) delta = readexactly(self._stream, l - self.deltaheadersize) node, p1, p2, deltabase, cs = self._deltaheader(header, prevnode) return {'node': node, 'p1': p1, 'p2': p2, 'cs': cs, 'deltabase': deltabase, 'delta': delta} def getchunks(self): """returns all the chunks contains in the bundle Used when you need to forward the binary stream to a file or another network API. To do so, it parse the changegroup data, otherwise it will block in case of sshrepo because it don't know the end of the stream. """ # an empty chunkgroup is the end of the changegroup # a changegroup has at least 2 chunkgroups (changelog and manifest). # after that, an empty chunkgroup is the end of the changegroup empty = False count = 0 while not empty or count <= 2: empty = True count += 1 while True: chunk = getchunk(self) if not chunk: break empty = False yield chunkheader(len(chunk)) pos = 0 while pos < len(chunk): next = pos + 2**20 yield chunk[pos:next] pos = next yield closechunk() def _unpackmanifests(self, repo, revmap, trp, prog, numchanges): # We know that we'll never have more manifests than we had # changesets. self.callback = prog(_('manifests'), numchanges) # no need to check for empty manifest group here: # if the result of the merge of 1 and 2 is the same in 3 and 4, # no new manifest will be created and the manifest group will # be empty during the pull self.manifestheader() repo.manifest.addgroup(self, revmap, trp) repo.ui.progress(_('manifests'), None) def apply(self, repo, srctype, url, emptyok=False, targetphase=phases.draft, expectedtotal=None): """Add the changegroup returned by source.read() to this repo. srctype is a string like 'push', 'pull', or 'unbundle'. url is the URL of the repo where this changegroup is coming from. Return an integer summarizing the change to this repo: - nothing changed or no source: 0 - more heads than before: 1+added heads (2..n) - fewer heads than before: -1-removed heads (-2..-n) - number of heads stays the same: 1 """ repo = repo.unfiltered() def csmap(x): repo.ui.debug("add changeset %s\n" % short(x)) return len(cl) def revmap(x): return cl.rev(x) changesets = files = revisions = 0 tr = repo.transaction("\n".join([srctype, util.hidepassword(url)])) # The transaction could have been created before and already # carries source information. In this case we use the top # level data. We overwrite the argument because we need to use # the top level value (if they exist) in this function. srctype = tr.hookargs.setdefault('source', srctype) url = tr.hookargs.setdefault('url', url) # write changelog data to temp files so concurrent readers will not see # inconsistent view cl = repo.changelog cl.delayupdate(tr) oldheads = cl.heads() try: repo.hook('prechangegroup', throw=True, **tr.hookargs) trp = weakref.proxy(tr) # pull off the changeset group repo.ui.status(_("adding changesets\n")) clstart = len(cl) class prog(object): def __init__(self, step, total): self._step = step self._total = total self._count = 1 def __call__(self): repo.ui.progress(self._step, self._count, unit=_('chunks'), total=self._total) self._count += 1 self.callback = prog(_('changesets'), expectedtotal) efiles = set() def onchangelog(cl, node): efiles.update(cl.read(node)[3]) self.changelogheader() srccontent = cl.addgroup(self, csmap, trp, addrevisioncb=onchangelog) efiles = len(efiles) if not (srccontent or emptyok): raise error.Abort(_("received changelog group is empty")) clend = len(cl) changesets = clend - clstart repo.ui.progress(_('changesets'), None) # pull off the manifest group repo.ui.status(_("adding manifests\n")) self._unpackmanifests(repo, revmap, trp, prog, changesets) needfiles = {} if repo.ui.configbool('server', 'validate', default=False): # validate incoming csets have their manifests for cset in xrange(clstart, clend): mfnode = repo.changelog.read(repo.changelog.node(cset))[0] mfest = repo.manifest.readdelta(mfnode) # store file nodes we must see for f, n in mfest.iteritems(): needfiles.setdefault(f, set()).add(n) # process the files repo.ui.status(_("adding file changes\n")) self.callback = None pr = prog(_('files'), efiles) newrevs, newfiles = _addchangegroupfiles( repo, self, revmap, trp, pr, needfiles) revisions += newrevs files += newfiles dh = 0 if oldheads: heads = cl.heads() dh = len(heads) - len(oldheads) for h in heads: if h not in oldheads and repo[h].closesbranch(): dh -= 1 htext = "" if dh: htext = _(" (%+d heads)") % dh repo.ui.status(_("added %d changesets" " with %d changes to %d files%s\n") % (changesets, revisions, files, htext)) repo.invalidatevolatilesets() if changesets > 0: if 'node' not in tr.hookargs: tr.hookargs['node'] = hex(cl.node(clstart)) hookargs = dict(tr.hookargs) else: hookargs = dict(tr.hookargs) hookargs['node'] = hex(cl.node(clstart)) repo.hook('pretxnchangegroup', throw=True, **hookargs) added = [cl.node(r) for r in xrange(clstart, clend)] publishing = repo.publishing() if srctype in ('push', 'serve'): # Old servers can not push the boundary themselves. # New servers won't push the boundary if changeset already # exists locally as secret # # We should not use added here but the list of all change in # the bundle if publishing: phases.advanceboundary(repo, tr, phases.public, srccontent) else: # Those changesets have been pushed from the outside, their # phases are going to be pushed alongside. Therefor # `targetphase` is ignored. phases.advanceboundary(repo, tr, phases.draft, srccontent) phases.retractboundary(repo, tr, phases.draft, added) elif srctype != 'strip': # publishing only alter behavior during push # # strip should not touch boundary at all phases.retractboundary(repo, tr, targetphase, added) if changesets > 0: if srctype != 'strip': # During strip, branchcache is invalid but coming call to # `destroyed` will repair it. # In other case we can safely update cache on disk. branchmap.updatecache(repo.filtered('served')) def runhooks(): # These hooks run when the lock releases, not when the # transaction closes. So it's possible for the changelog # to have changed since we last saw it. if clstart >= len(repo): return # forcefully update the on-disk branch cache repo.ui.debug("updating the branch cache\n") repo.hook("changegroup", **hookargs) for n in added: args = hookargs.copy() args['node'] = hex(n) repo.hook("incoming", **args) newheads = [h for h in repo.heads() if h not in oldheads] repo.ui.log("incoming", "%s incoming changes - new heads: %s\n", len(added), ', '.join([hex(c[:6]) for c in newheads])) tr.addpostclose('changegroup-runhooks-%020i' % clstart, lambda tr: repo._afterlock(runhooks)) tr.close() finally: tr.release() repo.ui.flush() # never return 0 here: if dh < 0: return dh - 1 else: return dh + 1 class cg2unpacker(cg1unpacker): """Unpacker for cg2 streams. cg2 streams add support for generaldelta, so the delta header format is slightly different. All other features about the data remain the same. """ deltaheader = _CHANGEGROUPV2_DELTA_HEADER deltaheadersize = struct.calcsize(deltaheader) version = '02' def _deltaheader(self, headertuple, prevnode): node, p1, p2, deltabase, cs = headertuple return node, p1, p2, deltabase, cs class headerlessfixup(object): def __init__(self, fh, h): self._h = h self._fh = fh def read(self, n): if self._h: d, self._h = self._h[:n], self._h[n:] if len(d) < n: d += readexactly(self._fh, n - len(d)) return d return readexactly(self._fh, n) class cg1packer(object): deltaheader = _CHANGEGROUPV1_DELTA_HEADER version = '01' def __init__(self, repo, bundlecaps=None): """Given a source repo, construct a bundler. bundlecaps is optional and can be used to specify the set of capabilities which can be used to build the bundle. """ # Set of capabilities we can use to build the bundle. if bundlecaps is None: bundlecaps = set() self._bundlecaps = bundlecaps # experimental config: bundle.reorder reorder = repo.ui.config('bundle', 'reorder', 'auto') if reorder == 'auto': reorder = None else: reorder = util.parsebool(reorder) self._repo = repo self._reorder = reorder self._progress = repo.ui.progress if self._repo.ui.verbose and not self._repo.ui.debugflag: self._verbosenote = self._repo.ui.note else: self._verbosenote = lambda s: None def close(self): return closechunk() def fileheader(self, fname): return chunkheader(len(fname)) + fname def group(self, nodelist, revlog, lookup, units=None): """Calculate a delta group, yielding a sequence of changegroup chunks (strings). Given a list of changeset revs, return a set of deltas and metadata corresponding to nodes. The first delta is first parent(nodelist[0]) -> nodelist[0], the receiver is guaranteed to have this parent as it has all history before these changesets. In the case firstparent is nullrev the changegroup starts with a full revision. If units is not None, progress detail will be generated, units specifies the type of revlog that is touched (changelog, manifest, etc.). """ # if we don't have any revisions touched by these changesets, bail if len(nodelist) == 0: yield self.close() return # for generaldelta revlogs, we linearize the revs; this will both be # much quicker and generate a much smaller bundle if (revlog._generaldelta and self._reorder is None) or self._reorder: dag = dagutil.revlogdag(revlog) revs = set(revlog.rev(n) for n in nodelist) revs = dag.linearize(revs) else: revs = sorted([revlog.rev(n) for n in nodelist]) # add the parent of the first rev p = revlog.parentrevs(revs[0])[0] revs.insert(0, p) # build deltas total = len(revs) - 1 msgbundling = _('bundling') for r in xrange(len(revs) - 1): if units is not None: self._progress(msgbundling, r + 1, unit=units, total=total) prev, curr = revs[r], revs[r + 1] linknode = lookup(revlog.node(curr)) for c in self.revchunk(revlog, curr, prev, linknode): yield c if units is not None: self._progress(msgbundling, None) yield self.close() # filter any nodes that claim to be part of the known set def prune(self, revlog, missing, commonrevs): rr, rl = revlog.rev, revlog.linkrev return [n for n in missing if rl(rr(n)) not in commonrevs] def _packmanifests(self, mfnodes, lookuplinknode): """Pack flat manifests into a changegroup stream.""" ml = self._repo.manifest size = 0 for chunk in self.group( mfnodes, ml, lookuplinknode, units=_('manifests')): size += len(chunk) yield chunk self._verbosenote(_('%8.i (manifests)\n') % size) def generate(self, commonrevs, clnodes, fastpathlinkrev, source): '''yield a sequence of changegroup chunks (strings)''' repo = self._repo cl = repo.changelog ml = repo.manifest clrevorder = {} mfs = {} # needed manifests fnodes = {} # needed file nodes changedfiles = set() # Callback for the changelog, used to collect changed files and manifest # nodes. # Returns the linkrev node (identity in the changelog case). def lookupcl(x): c = cl.read(x) clrevorder[x] = len(clrevorder) changedfiles.update(c[3]) # record the first changeset introducing this manifest version mfs.setdefault(c[0], x) return x self._verbosenote(_('uncompressed size of bundle content:\n')) size = 0 for chunk in self.group(clnodes, cl, lookupcl, units=_('changesets')): size += len(chunk) yield chunk self._verbosenote(_('%8.i (changelog)\n') % size) # We need to make sure that the linkrev in the changegroup refers to # the first changeset that introduced the manifest or file revision. # The fastpath is usually safer than the slowpath, because the filelogs # are walked in revlog order. # # When taking the slowpath with reorder=None and the manifest revlog # uses generaldelta, the manifest may be walked in the "wrong" order. # Without 'clrevorder', we would get an incorrect linkrev (see fix in # cc0ff93d0c0c). # # When taking the fastpath, we are only vulnerable to reordering # of the changelog itself. The changelog never uses generaldelta, so # it is only reordered when reorder=True. To handle this case, we # simply take the slowpath, which already has the 'clrevorder' logic. # This was also fixed in cc0ff93d0c0c. fastpathlinkrev = fastpathlinkrev and not self._reorder # Callback for the manifest, used to collect linkrevs for filelog # revisions. # Returns the linkrev node (collected in lookupcl). def lookupmflinknode(x): clnode = mfs[x] if not fastpathlinkrev: mdata = ml.readfast(x) for f, n in mdata.iteritems(): if f in changedfiles: # record the first changeset introducing this filelog # version fclnodes = fnodes.setdefault(f, {}) fclnode = fclnodes.setdefault(n, clnode) if clrevorder[clnode] < clrevorder[fclnode]: fclnodes[n] = clnode return clnode mfnodes = self.prune(ml, mfs, commonrevs) for x in self._packmanifests(mfnodes, lookupmflinknode): yield x mfs.clear() clrevs = set(cl.rev(x) for x in clnodes) def linknodes(filerevlog, fname): if fastpathlinkrev: llr = filerevlog.linkrev def genfilenodes(): for r in filerevlog: linkrev = llr(r) if linkrev in clrevs: yield filerevlog.node(r), cl.node(linkrev) return dict(genfilenodes()) return fnodes.get(fname, {}) for chunk in self.generatefiles(changedfiles, linknodes, commonrevs, source): yield chunk yield self.close() if clnodes: repo.hook('outgoing', node=hex(clnodes[0]), source=source) # The 'source' parameter is useful for extensions def generatefiles(self, changedfiles, linknodes, commonrevs, source): repo = self._repo progress = self._progress msgbundling = _('bundling') total = len(changedfiles) # for progress output msgfiles = _('files') for i, fname in enumerate(sorted(changedfiles)): filerevlog = repo.file(fname) if not filerevlog: raise error.Abort(_("empty or missing revlog for %s") % fname) linkrevnodes = linknodes(filerevlog, fname) # Lookup for filenodes, we collected the linkrev nodes above in the # fastpath case and with lookupmf in the slowpath case. def lookupfilelog(x): return linkrevnodes[x] filenodes = self.prune(filerevlog, linkrevnodes, commonrevs) if filenodes: progress(msgbundling, i + 1, item=fname, unit=msgfiles, total=total) h = self.fileheader(fname) size = len(h) yield h for chunk in self.group(filenodes, filerevlog, lookupfilelog): size += len(chunk) yield chunk self._verbosenote(_('%8.i %s\n') % (size, fname)) progress(msgbundling, None) def deltaparent(self, revlog, rev, p1, p2, prev): return prev def revchunk(self, revlog, rev, prev, linknode): node = revlog.node(rev) p1, p2 = revlog.parentrevs(rev) base = self.deltaparent(revlog, rev, p1, p2, prev) prefix = '' if revlog.iscensored(base) or revlog.iscensored(rev): try: delta = revlog.revision(node) except error.CensoredNodeError as e: delta = e.tombstone if base == nullrev: prefix = mdiff.trivialdiffheader(len(delta)) else: baselen = revlog.rawsize(base) prefix = mdiff.replacediffheader(baselen, len(delta)) elif base == nullrev: delta = revlog.revision(node) prefix = mdiff.trivialdiffheader(len(delta)) else: delta = revlog.revdiff(base, rev) p1n, p2n = revlog.parents(node) basenode = revlog.node(base) meta = self.builddeltaheader(node, p1n, p2n, basenode, linknode) meta += prefix l = len(meta) + len(delta) yield chunkheader(l) yield meta yield delta def builddeltaheader(self, node, p1n, p2n, basenode, linknode): # do nothing with basenode, it is implicitly the previous one in HG10 return struct.pack(self.deltaheader, node, p1n, p2n, linknode) class cg2packer(cg1packer): version = '02' deltaheader = _CHANGEGROUPV2_DELTA_HEADER def __init__(self, repo, bundlecaps=None): super(cg2packer, self).__init__(repo, bundlecaps) if self._reorder is None: # Since generaldelta is directly supported by cg2, reordering # generally doesn't help, so we disable it by default (treating # bundle.reorder=auto just like bundle.reorder=False). self._reorder = False def deltaparent(self, revlog, rev, p1, p2, prev): dp = revlog.deltaparent(rev) # avoid storing full revisions; pick prev in those cases # also pick prev when we can't be sure remote has dp if dp == nullrev or (dp != p1 and dp != p2 and dp != prev): return prev return dp def builddeltaheader(self, node, p1n, p2n, basenode, linknode): return struct.pack(self.deltaheader, node, p1n, p2n, basenode, linknode) packermap = {'01': (cg1packer, cg1unpacker), # cg2 adds support for exchanging generaldelta '02': (cg2packer, cg2unpacker), } def _changegroupinfo(repo, nodes, source): if repo.ui.verbose or source == 'bundle': repo.ui.status(_("%d changesets found\n") % len(nodes)) if repo.ui.debugflag: repo.ui.debug("list of changesets:\n") for node in nodes: repo.ui.debug("%s\n" % hex(node)) def getsubsetraw(repo, outgoing, bundler, source, fastpath=False): repo = repo.unfiltered() commonrevs = outgoing.common csets = outgoing.missing heads = outgoing.missingheads # We go through the fast path if we get told to, or if all (unfiltered # heads have been requested (since we then know there all linkrevs will # be pulled by the client). heads.sort() fastpathlinkrev = fastpath or ( repo.filtername is None and heads == sorted(repo.heads())) repo.hook('preoutgoing', throw=True, source=source) _changegroupinfo(repo, csets, source) return bundler.generate(commonrevs, csets, fastpathlinkrev, source) def getsubset(repo, outgoing, bundler, source, fastpath=False): gengroup = getsubsetraw(repo, outgoing, bundler, source, fastpath) return packermap[bundler.version][1](util.chunkbuffer(gengroup), None) def changegroupsubset(repo, roots, heads, source, version='01'): """Compute a changegroup consisting of all the nodes that are descendants of any of the roots and ancestors of any of the heads. Return a chunkbuffer object whose read() method will return successive changegroup chunks. It is fairly complex as determining which filenodes and which manifest nodes need to be included for the changeset to be complete is non-trivial. Another wrinkle is doing the reverse, figuring out which changeset in the changegroup a particular filenode or manifestnode belongs to. """ cl = repo.changelog if not roots: roots = [nullid] discbases = [] for n in roots: discbases.extend([p for p in cl.parents(n) if p != nullid]) # TODO: remove call to nodesbetween. csets, roots, heads = cl.nodesbetween(roots, heads) included = set(csets) discbases = [n for n in discbases if n not in included] outgoing = discovery.outgoing(cl, discbases, heads) bundler = packermap[version][0](repo) return getsubset(repo, outgoing, bundler, source) def getlocalchangegroupraw(repo, source, outgoing, bundlecaps=None, version='01'): """Like getbundle, but taking a discovery.outgoing as an argument. This is only implemented for local repos and reuses potentially precomputed sets in outgoing. Returns a raw changegroup generator.""" if not outgoing.missing: return None bundler = packermap[version][0](repo, bundlecaps) return getsubsetraw(repo, outgoing, bundler, source) def getlocalchangegroup(repo, source, outgoing, bundlecaps=None, version='01'): """Like getbundle, but taking a discovery.outgoing as an argument. This is only implemented for local repos and reuses potentially precomputed sets in outgoing.""" if not outgoing.missing: return None bundler = packermap[version][0](repo, bundlecaps) return getsubset(repo, outgoing, bundler, source) def computeoutgoing(repo, heads, common): """Computes which revs are outgoing given a set of common and a set of heads. This is a separate function so extensions can have access to the logic. Returns a discovery.outgoing object. """ cl = repo.changelog if common: hasnode = cl.hasnode common = [n for n in common if hasnode(n)] else: common = [nullid] if not heads: heads = cl.heads() return discovery.outgoing(cl, common, heads) def getchangegroup(repo, source, heads=None, common=None, bundlecaps=None, version='01'): """Like changegroupsubset, but returns the set difference between the ancestors of heads and the ancestors common. If heads is None, use the local heads. If common is None, use [nullid]. The nodes in common might not all be known locally due to the way the current discovery protocol works. """ outgoing = computeoutgoing(repo, heads, common) return getlocalchangegroup(repo, source, outgoing, bundlecaps=bundlecaps, version=version) def changegroup(repo, basenodes, source): # to avoid a race we use changegroupsubset() (issue1320) return changegroupsubset(repo, basenodes, repo.heads(), source) def _addchangegroupfiles(repo, source, revmap, trp, pr, needfiles): revisions = 0 files = 0 while True: chunkdata = source.filelogheader() if not chunkdata: break f = chunkdata["filename"] repo.ui.debug("adding %s revisions\n" % f) pr() fl = repo.file(f) o = len(fl) try: if not fl.addgroup(source, revmap, trp): raise error.Abort(_("received file revlog group is empty")) except error.CensoredBaseError as e: raise error.Abort(_("received delta base is censored: %s") % e) revisions += len(fl) - o files += 1 if f in needfiles: needs = needfiles[f] for new in xrange(o, len(fl)): n = fl.node(new) if n in needs: needs.remove(n) else: raise error.Abort( _("received spurious file revlog entry")) if not needs: del needfiles[f] repo.ui.progress(_('files'), None) for f, needs in needfiles.iteritems(): fl = repo.file(f) for n in needs: try: fl.rev(n) except error.LookupError: raise error.Abort( _('missing file data for %s:%s - run hg verify') % (f, hex(n))) return revisions, files