$ cat <> $HGRCPATH > [extensions] > notify= > > [hooks] > incoming.notify = python:hgext.notify.hook > > [notify] > sources = pull > diffstat = False > > [usersubs] > foo@bar = * > > [reposubs] > * = baz > EOF $ hg help notify notify extension - hooks for sending email push notifications This extension let you run hooks sending email notifications when changesets are being pushed, from the sending or receiving side. First, enable the extension as explained in "hg help extensions", and register the hook you want to run. "incoming" and "outgoing" hooks are run by the changesets receiver while the "outgoing" one is for the sender: [hooks] # one email for each incoming changeset incoming.notify = python:hgext.notify.hook # one email for all incoming changesets changegroup.notify = python:hgext.notify.hook # one email for all outgoing changesets outgoing.notify = python:hgext.notify.hook Now the hooks are running, subscribers must be assigned to repositories. Use the "[usersubs]" section to map repositories to a given email or the "[reposubs]" section to map emails to a single repository: [usersubs] # key is subscriber email, value is a comma-separated list of glob # patterns user@host = pattern [reposubs] # key is glob pattern, value is a comma-separated list of subscriber # emails pattern = user@host Glob patterns are matched against absolute path to repository root. The subscriptions can be defined in their own file and referenced with: [notify] config = /path/to/subscriptionsfile Alternatively, they can be added to Mercurial configuration files by setting the previous entry to an empty value. At this point, notifications should be generated but will not be sent until you set the "notify.test" entry to "False". Notifications content can be tweaked with the following configuration entries: notify.test If "True", print messages to stdout instead of sending them. Default: True. notify.sources Space separated list of change sources. Notifications are sent only if it includes the incoming or outgoing changes source. Incoming sources can be "serve" for changes coming from http or ssh, "pull" for pulled changes, "unbundle" for changes added by "hg unbundle" or "push" for changes being pushed locally. Outgoing sources are the same except for "unbundle" which is replaced by "bundle". Default: serve. notify.strip Number of leading slashes to strip from url paths. By default, notifications references repositories with their absolute path. "notify.strip" let you turn them into relative paths. For example, "notify.strip=3" will change "/long/path/repository" into "repository". Default: 0. notify.domain If subscribers emails or the from email have no domain set, complete them with this value. notify.style Style file to use when formatting emails. notify.template Template to use when formatting emails. notify.incoming Template to use when run as incoming hook, override "notify.template". notify.outgoing Template to use when run as outgoing hook, override "notify.template". notify.changegroup Template to use when running as changegroup hook, override "notify.template". notify.maxdiff Maximum number of diff lines to include in notification email. Set to 0 to disable the diff, -1 to include all of it. Default: 300. notify.maxsubject Maximum number of characters in emails subject line. Default: 67. notify.diffstat Set to True to include a diffstat before diff content. Default: True. notify.merge If True, send notifications for merge changesets. Default: True. notify.mbox If set, append mails to this mbox file instead of sending. Default: None. If set, the following entries will also be used to customize the notifications: email.from Email "From" address to use if none can be found in generated email content. web.baseurl Root repository browsing URL to combine with repository paths when making references. See also "notify.strip". no commands defined $ hg init a $ echo a > a/a commit $ hg --cwd a commit -Ama -d '0 0' adding a clone $ hg --traceback clone a b updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a >> a/a commit $ hg --traceback --cwd a commit -Amb -d '1 0' on Mac OS X 10.5 the tmp path is very long so would get stripped in the subject line $ cat <> $HGRCPATH > [notify] > maxsubject = 200 > EOF the python call below wraps continuation lines, which appear on Mac OS X 10.5 because of the very long subject line pull (minimal config) $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n[\t ]", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Date: * (glob) Subject: changeset in $TESTTMP/b: b From: test X-Hg-Notification: changeset 0647d048b600 Message-Id: <*> (glob) To: baz, foo@bar changeset 0647d048b600 in $TESTTMP/b (glob) details: $TESTTMP/b?cmd=changeset;node=0647d048b600 description: b diffs (6 lines): diff -r cb9a9f314b8b -r 0647d048b600 a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:01 1970 +0000 @@ -1,1 +1,2 @@ a +a (run 'hg update' to get a working copy) $ cat <> $HGRCPATH > [notify] > config = `pwd`/.notify.conf > domain = test.com > strip = 42 > template = Subject: {desc|firstline|strip}\nFrom: {author}\nX-Test: foo\n\nchangeset {node|short} in {webroot}\ndescription:\n\t{desc|tabindent|strip} > > [web] > baseurl = http://test/ > EOF fail for config file is missing $ hg --cwd b rollback repository tip rolled back to revision 0 (undo pull) $ hg --cwd b pull ../a 2>&1 | grep 'error.*\.notify\.conf' > /dev/null && echo pull failed pull failed $ touch ".notify.conf" pull $ hg --cwd b rollback repository tip rolled back to revision 0 (undo pull) $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: b From: test@test.com X-Hg-Notification: changeset 0647d048b600 Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 0647d048b600 in b description: b diffs (6 lines): diff -r cb9a9f314b8b -r 0647d048b600 a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:01 1970 +0000 @@ -1,1 +1,2 @@ a +a (run 'hg update' to get a working copy) $ cat << EOF >> $HGRCPATH > [hooks] > incoming.notify = python:hgext.notify.hook > > [notify] > sources = pull > diffstat = True > EOF pull $ hg --cwd b rollback repository tip rolled back to revision 0 (undo pull) $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: b From: test@test.com X-Hg-Notification: changeset 0647d048b600 Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 0647d048b600 in b description: b diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (6 lines): diff -r cb9a9f314b8b -r 0647d048b600 a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:01 1970 +0000 @@ -1,1 +1,2 @@ a +a (run 'hg update' to get a working copy) test merge $ cd a $ hg up -C 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a >> a $ hg ci -Am adda2 -d '2 0' created new head $ hg merge 0 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg ci -m merge -d '3 0' $ cd .. $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 2 changesets with 0 changes to 0 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: adda2 From: test@test.com X-Hg-Notification: changeset 0a184ce6067f Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 0a184ce6067f in b description: adda2 diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (6 lines): diff -r cb9a9f314b8b -r 0a184ce6067f a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:02 1970 +0000 @@ -1,1 +1,2 @@ a +a Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: merge From: test@test.com X-Hg-Notification: changeset 6a0cf76b2701 Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 6a0cf76b2701 in b description: merge (run 'hg update' to get a working copy) non-ascii content and truncation of multi-byte subject $ cat <> $HGRCPATH > [notify] > maxsubject = 4 > EOF $ echo a >> a/a $ hg --cwd a --encoding utf-8 commit -A -d '0 0' \ > -m `python -c 'print "\xc3\xa0\xc3\xa1\xc3\xa2\xc3\xa3\xc3\xa4"'` $ hg --traceback --cwd b --encoding utf-8 pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Test: foo Date: * (glob) Subject: \xc3\xa0... (esc) From: test@test.com X-Hg-Notification: changeset 7ea05ad269dc Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 7ea05ad269dc in b description: \xc3\xa0\xc3\xa1\xc3\xa2\xc3\xa3\xc3\xa4 (esc) diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (7 lines): diff -r 6a0cf76b2701 -r 7ea05ad269dc a --- a/a Thu Jan 01 00:00:03 1970 +0000 +++ b/a Thu Jan 01 00:00:00 1970 +0000 @@ -1,2 +1,3 @@ a a +a (run 'hg update' to get a working copy) long lines $ cat <> $HGRCPATH > [notify] > maxsubject = 67 > test = False > mbox = mbox > EOF $ python -c 'print "no" * 500' >> a/a $ hg --cwd a commit -A -m "long line" $ hg --traceback --cwd b pull ../a pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files notify: sending 2 subscribers 1 changes (run 'hg update' to get a working copy) $ python -c 'import sys,re; print re.sub("\n\t", " ", file("b/mbox").read()),' From test@test.com ... ... .. ..:..:.. .... (re) Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: long line From: test@test.com X-Hg-Notification: changeset e0be44cf638b Message-Id: (glob) To: baz@test.com, foo@bar changeset e0be44cf638b in b description: long line diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (8 lines): diff -r 7ea05ad269dc -r e0be44cf638b a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:00 1970 +0000 @@ -1,3 +1,4 @@ a a a +nononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononononono