svn-support: Make the reload command timeout configurable via ini file.

Duration of the reload command may heavily vary between different
commands, setups, etc. Therefore we should make the timeout
configurable. This way customers can adapt it to their needs.

configs/development.ini

@@ -1,673 +1,676 b''
 
 
 ################################################################################
 ##                    RHODECODE ENTERPRISE CONFIGURATION                      ##
 # The %(here)s variable will be replaced with the parent directory of this file#
 ################################################################################
 
 [DEFAULT]
 debug = true
 
 ################################################################################
 ##                            EMAIL CONFIGURATION                             ##
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 
 ## prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ## email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 ## Uncomment and replace with the address which should receive any error report
 ## note: using appenlight for error handling doesn't need this to be uncommented
 #email_to = admin@localhost
 
 ## in case of Application errors, sent an error email form
 #error_email_from = rhodecode_error@localhost
 
 ## additional error message to be send in case of server crash
 #error_message =
 
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 ## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.)
 #smtp_auth =
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ##################################
 ##     WAITRESS WSGI SERVER     ##
 ## Recommended for Development  ##
 ##################################
 
 use = egg:waitress#main
 ## number of worker threads
 threads = 5
 ## MAX BODY SIZE 100GB
 max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config rhodecode.ini --paste rhodecode.ini
 
 #use = egg:gunicorn#main
 ## Sets the number of process workers. You must set `instance_id = *`
 ## when this option is set to more than one worker, recommended
 ## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
 ## The `instance_id = *` must be set in the [app:main] section below
 #workers = 2
 ## number of threads for each of the worker, must be set to 1 for gevent
 ## generally recommened to be at 1
 #threads = 1
 ## process name
 #proc_name = rhodecode
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 #worker_class = sync
 ## The maximum number of simultaneous clients. Valid only for Gevent
 #worker_connections = 10
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 #max_requests = 1000
 #max_requests_jitter = 30
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 #timeout = 21600
 
 
 ## prefix middleware for RhodeCode, disables force_https flag.
 ## recommended when using proxy setup.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/<prefix>. Enable `filter-with =` option below as well.
 ## optionally set prefix like: `prefix = /<your-prefix>`
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 use = egg:rhodecode-enterprise-ce
 
 ## enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 # During development the we want to have the debug toolbar enabled
 pyramid.includes =
     pyramid_debugtoolbar
     rhodecode.utils.debugtoolbar
     rhodecode.lib.middleware.request_wrapper
 
 pyramid.reload_templates = true
 
 debugtoolbar.hosts = 0.0.0.0/0
 debugtoolbar.exclude_prefixes =
     /css
     /fonts
     /images
     /js
 
 ## RHODECODE PLUGINS ##
 rhodecode.includes =
     rhodecode.api
 
 
 # api prefix url
 rhodecode.api.url = /_admin/api
 
 
 ## END RHODECODE PLUGINS ##
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ## return gzipped responses from Rhodecode (static files/application)
 gzip_responses = false
 
 ## autogenerate javascript routes file on startup
 generate_js_files = false
 
 ## Optional Languages
 ## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## perform a full repository scan on each server start, this should be
 ## set to false after first startup, to allow faster server restarts.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## change this to unique ID for security
 app_instance_uuid = rc-production
 
 ## cut off limit for large diffs (size in bytes)
 cut_off_limit_diff = 1024000
 cut_off_limit_file = 256000
 
 ## use cache version of scm repo everywhere
 vcs_full_cache = true
 
 ## force https in RhodeCode, fixes https redirects, assumes it's always https
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 ## number of commits stats will parse on each iteration
 commit_parse_limit = 25
 
 ## git rev filter option, --all is the default filter, if you need to
 ## hide all refs in changelog switch this to --branches --tags
 git_rev_filter = --branches --tags
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/<gistid>.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/<gistid>
 gist_alias_url =
 
 ## List of controllers (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token = <token> to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ##
 ## Syntax is <ControllerClass>:<function_pattern>.
 ## To enable access to raw_files put `FilesController:raw`.
 ## To enable access to patches add `ChangesetController:changeset_patch`.
 ## The list should be "," separated and on a single line.
 ##
 ## Recommended controllers to enable:
 #    ChangesetController:changeset_patch,
 #    ChangesetController:changeset_raw,
 #    FilesController:raw,
 #    FilesController:archivefile,
 #    GistsController:*,
 api_access_controllers_whitelist =
 
 ## default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of rhodecode, make sure it's globally unique for
 ## all running rhodecode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal rhodecode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authnetication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## generated license token, goto license page in RhodeCode settings to obtain
 ## new token
 license_token =
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = dev
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 use_celery = false
 broker.host = localhost
 broker.vhost = rabbitmqhost
 broker.port = 5672
 broker.user = rabbitmq
 broker.password = qweqwe
 
 celery.imports = rhodecode.lib.celerylib.tasks
 
 celery.result.backend = amqp
 celery.result.dburi = amqp://
 celery.result.serialier = json
 
 #celery.send.task.error.emails = true
 #celery.amqp.task.result.expires = 18000
 
 celeryd.concurrency = 2
 #celeryd.log.file = celeryd.log
 celeryd.log.level = debug
 celeryd.max.tasks.per.child = 1
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.always.eager = false
 
 ####################################
 ###         BEAKER CACHE        ####
 ####################################
 # default cache dir for templates.  Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk
 cache_dir = %(here)s/data
 
 ## locking and default file storage for Beaker. Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
 beaker.cache.data_dir = %(here)s/data/cache/beaker_data
 beaker.cache.lock_dir = %(here)s/data/cache/beaker_lock
 
 beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long
 
 beaker.cache.super_short_term.type = memory
 beaker.cache.super_short_term.expire = 10
 beaker.cache.super_short_term.key_length = 256
 
 beaker.cache.short_term.type = memory
 beaker.cache.short_term.expire = 60
 beaker.cache.short_term.key_length = 256
 
 beaker.cache.long_term.type = memory
 beaker.cache.long_term.expire = 36000
 beaker.cache.long_term.key_length = 256
 
 beaker.cache.sql_cache_short.type = memory
 beaker.cache.sql_cache_short.expire = 10
 beaker.cache.sql_cache_short.key_length = 256
 
 ## default is memory cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.auth_plugins.type = ext:database
 #beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock
 #beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.cache.auth_plugins.sa.pool_recycle = 3600
 #beaker.cache.auth_plugins.sa.pool_size = 10
 #beaker.cache.auth_plugins.sa.max_overflow = 0
 
 beaker.cache.repo_cache_long.type = memorylru_base
 beaker.cache.repo_cache_long.max_items = 4096
 beaker.cache.repo_cache_long.expire = 2592000
 
 ## default is memorylru_base cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.repo_cache_long.type = ext:memcached
 #beaker.cache.repo_cache_long.url = localhost:11211
 #beaker.cache.repo_cache_long.expire = 1209600
 #beaker.cache.repo_cache_long.key_length = 256
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions/data
 
 ## db based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = develop-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = <key_for_encryption>
 #beaker.session.validate_key = <validation_key>
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 ## Path to use for the cookie.
 #beaker.session.cookie_path = /<your-prefix>
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 # WHOOSH Backend, doesn't require additional services to run
 # it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 
 channelstream.enabled = false
 ## location of channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 ## location of the channelstream server from outside world
 ## most likely this would be an http server special backend URL, that handles
 ## websocket connections see nginx example for config
 # channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 ## proxy path that can be used by http daemons for exposing channelstream
 # channelstream.proxy_path = /_channelstream
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 # used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additonal keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ################################################################################
 ## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT*  ##
 ## Debug mode will enable the interactive debugging tool, allowing ANYONE to  ##
 ## execute malicious code after an exception is raised.                       ##
 ################################################################################
 #set debug = false
 
 
 ##############
 ## STYLING  ##
 ##############
 debug_style = true
 
 #########################################################
 ### DB CONFIGS - EACH DB WILL HAVE IT'S OWN CONFIG    ###
 #########################################################
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode
 sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this ammount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 sqlalchemy.db1.convert_unicode = true
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operatations
 ## Available protocols are:
 ## `pyro4` - using pyro4 server
 ## `http` - using http-rpc backend (default)
 vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `pyro4` - using pyro4 server
 ## `http` - using http-rpc backend (default)
 vcs.scm_app_implementation = http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `pyro4` - using pyro4 server
 ## `http` - using http-rpc backend (default)
 vcs.hooks.protocol = http
 
 vcs.server.log_level = debug
 ## Start VCSServer with this instance as a subprocess, usefull for development
 vcs.start_server = true
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ############################################################
 ### Subversion proxy support (mod_dav_svn)               ###
 ### Maps RhodeCode repo groups into SVN paths for Apache ###
 ############################################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## Used as a prefix to the <Location> block in the generated config file. In
 ## most cases it should be set to `/`.
 svn.proxy.location_root = /
 ## Command to reload the mod dav svn configuration on change.
 ## Example: `/etc/init.d/apache2 reload`
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
+## If the timeout expires before the reload command finishes, the command will
+## be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
+#svn.proxy.reload_timeout = 10
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, routes, rhodecode, sqlalchemy, beaker, pyro4, templates
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_pyro4]
 level = DEBUG
 handlers =
 qualname = Pyro4
 propagate = 1
 
 [logger_templates]
 level = INFO
 handlers =
 qualname = pylons.templating
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr,)
 level = DEBUG
 formatter = color_formatter
 
 [handler_console_sql]
 class = StreamHandler
 args = (sys.stderr,)
 level = DEBUG
 formatter = color_formatter_sql
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.Pyro4AwareFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S

configs/production.ini

@@ -1,644 +1,647 b''
 
 
 ################################################################################
 ##                 RHODECODE COMMUNITY EDITION CONFIGURATION                  ##
 # The %(here)s variable will be replaced with the parent directory of this file#
 ################################################################################
 
 [DEFAULT]
 debug = true
 
 ################################################################################
 ##                            EMAIL CONFIGURATION                             ##
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 
 ## prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ## email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 ## Uncomment and replace with the address which should receive any error report
 ## note: using appenlight for error handling doesn't need this to be uncommented
 #email_to = admin@localhost
 
 ## in case of Application errors, sent an error email form
 #error_email_from = rhodecode_error@localhost
 
 ## additional error message to be send in case of server crash
 #error_message =
 
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 ## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.)
 #smtp_auth =
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ##################################
 ##     WAITRESS WSGI SERVER     ##
 ## Recommended for Development  ##
 ##################################
 
 #use = egg:waitress#main
 ## number of worker threads
 #threads = 5
 ## MAX BODY SIZE 100GB
 #max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 #asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config rhodecode.ini --paste rhodecode.ini
 
 use = egg:gunicorn#main
 ## Sets the number of process workers. You must set `instance_id = *`
 ## when this option is set to more than one worker, recommended
 ## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
 ## The `instance_id = *` must be set in the [app:main] section below
 workers = 2
 ## number of threads for each of the worker, must be set to 1 for gevent
 ## generally recommened to be at 1
 #threads = 1
 ## process name
 proc_name = rhodecode
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 worker_class = sync
 ## The maximum number of simultaneous clients. Valid only for Gevent
 #worker_connections = 10
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 max_requests = 1000
 max_requests_jitter = 30
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 timeout = 21600
 
 
 ## prefix middleware for RhodeCode, disables force_https flag.
 ## recommended when using proxy setup.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ## And set your prefix like: `prefix = /custom_prefix`
 ## be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ## to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 use = egg:rhodecode-enterprise-ce
 
 ## enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ## return gzipped responses from Rhodecode (static files/application)
 gzip_responses = false
 
 ## autogenerate javascript routes file on startup
 generate_js_files = false
 
 ## Optional Languages
 ## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## perform a full repository scan on each server start, this should be
 ## set to false after first startup, to allow faster server restarts.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## change this to unique ID for security
 app_instance_uuid = rc-production
 
 ## cut off limit for large diffs (size in bytes)
 cut_off_limit_diff = 1024000
 cut_off_limit_file = 256000
 
 ## use cache version of scm repo everywhere
 vcs_full_cache = true
 
 ## force https in RhodeCode, fixes https redirects, assumes it's always https
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 ## number of commits stats will parse on each iteration
 commit_parse_limit = 25
 
 ## git rev filter option, --all is the default filter, if you need to
 ## hide all refs in changelog switch this to --branches --tags
 git_rev_filter = --branches --tags
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/{gistid}.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
 ## List of controllers (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ##
 ## Syntax is ControllerClass:function_pattern.
 ## To enable access to raw_files put `FilesController:raw`.
 ## To enable access to patches add `ChangesetController:changeset_patch`.
 ## The list should be "," separated and on a single line.
 ##
 ## Recommended controllers to enable:
 #    ChangesetController:changeset_patch,
 #    ChangesetController:changeset_raw,
 #    FilesController:raw,
 #    FilesController:archivefile,
 #    GistsController:*,
 api_access_controllers_whitelist =
 
 ## default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of rhodecode, make sure it's globally unique for
 ## all running rhodecode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal rhodecode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authnetication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## generated license token, goto license page in RhodeCode settings to obtain
 ## new token
 license_token =
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = prod
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 use_celery = false
 broker.host = localhost
 broker.vhost = rabbitmqhost
 broker.port = 5672
 broker.user = rabbitmq
 broker.password = qweqwe
 
 celery.imports = rhodecode.lib.celerylib.tasks
 
 celery.result.backend = amqp
 celery.result.dburi = amqp://
 celery.result.serialier = json
 
 #celery.send.task.error.emails = true
 #celery.amqp.task.result.expires = 18000
 
 celeryd.concurrency = 2
 #celeryd.log.file = celeryd.log
 celeryd.log.level = debug
 celeryd.max.tasks.per.child = 1
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.always.eager = false
 
 ####################################
 ###         BEAKER CACHE        ####
 ####################################
 # default cache dir for templates.  Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk
 cache_dir = %(here)s/data
 
 ## locking and default file storage for Beaker. Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
 beaker.cache.data_dir = %(here)s/data/cache/beaker_data
 beaker.cache.lock_dir = %(here)s/data/cache/beaker_lock
 
 beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long
 
 beaker.cache.super_short_term.type = memory
 beaker.cache.super_short_term.expire = 10
 beaker.cache.super_short_term.key_length = 256
 
 beaker.cache.short_term.type = memory
 beaker.cache.short_term.expire = 60
 beaker.cache.short_term.key_length = 256
 
 beaker.cache.long_term.type = memory
 beaker.cache.long_term.expire = 36000
 beaker.cache.long_term.key_length = 256
 
 beaker.cache.sql_cache_short.type = memory
 beaker.cache.sql_cache_short.expire = 10
 beaker.cache.sql_cache_short.key_length = 256
 
 ## default is memory cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.auth_plugins.type = ext:database
 #beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock
 #beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.cache.auth_plugins.sa.pool_recycle = 3600
 #beaker.cache.auth_plugins.sa.pool_size = 10
 #beaker.cache.auth_plugins.sa.max_overflow = 0
 
 beaker.cache.repo_cache_long.type = memorylru_base
 beaker.cache.repo_cache_long.max_items = 4096
 beaker.cache.repo_cache_long.expire = 2592000
 
 ## default is memorylru_base cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.repo_cache_long.type = ext:memcached
 #beaker.cache.repo_cache_long.url = localhost:11211
 #beaker.cache.repo_cache_long.expire = 1209600
 #beaker.cache.repo_cache_long.key_length = 256
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions/data
 
 ## db based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = production-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 ## Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 ## WHOOSH Backend, doesn't require additional services to run
 ## it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 
 channelstream.enabled = false
 ## location of channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 ## location of the channelstream server from outside world
 ## most likely this would be an http server special backend URL, that handles
 ## websocket connections see nginx example for config
 # channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 ## proxy path that can be used by http daemons for exposing channelstream
 # channelstream.proxy_path = /_channelstream
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 # used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additonal keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ################################################################################
 ## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT*  ##
 ## Debug mode will enable the interactive debugging tool, allowing ANYONE to  ##
 ## execute malicious code after an exception is raised.                       ##
 ################################################################################
 set debug = false
 
 
 #########################################################
 ### DB CONFIGS - EACH DB WILL HAVE IT'S OWN CONFIG    ###
 #########################################################
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode
 sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 sqlalchemy.db1.convert_unicode = true
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operatations
 ## Available protocols are:
 ## `pyro4` - use pyro4 server
 ## `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `pyro4` - use pyro4 server
 ## `http` - use http-rpc backend (default)
 vcs.scm_app_implementation = http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `pyro4` - use pyro4 server
 ## `http` - use http-rpc backend (default)
 vcs.hooks.protocol = http
 
 vcs.server.log_level = info
 ## Start VCSServer with this instance as a subprocess, usefull for development
 vcs.start_server = false
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ############################################################
 ### Subversion proxy support (mod_dav_svn)               ###
 ### Maps RhodeCode repo groups into SVN paths for Apache ###
 ############################################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## Used as a prefix to the <Location> block in the generated config file.
 ## In most cases it should be set to `/`.
 svn.proxy.location_root = /
 ## Command to reload the mod dav svn configuration on change.
 ## Example: `/etc/init.d/apache2 reload`
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
+## If the timeout expires before the reload command finishes, the command will
+## be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
+#svn.proxy.reload_timeout = 10
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, routes, rhodecode, sqlalchemy, beaker, pyro4, templates
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_pyro4]
 level = DEBUG
 handlers =
 qualname = Pyro4
 propagate = 1
 
 [logger_templates]
 level = INFO
 handlers =
 qualname = pylons.templating
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr,)
 level = INFO
 formatter = generic
 
 [handler_console_sql]
 class = StreamHandler
 args = (sys.stderr,)
 level = WARN
 formatter = generic
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.Pyro4AwareFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S

rhodecode/svn_support/__init__.py

@@ -1,81 +1,86 b''
 # -*- coding: utf-8 -*-
 
 # Copyright (C) 2016-2016  RhodeCode GmbH
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License, version 3
 # (only), as published by the Free Software Foundation.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 # This program is dual-licensed. If you wish to learn more about the
 # RhodeCode Enterprise Edition, including its added features, Support services,
 # and proprietary license terms, please see https://rhodecode.com/licenses/
 
 import logging
 import os
 
 # Do not use `from rhodecode import events` here, it will be overridden by the
 # events module in this package due to pythons import mechanism.
 from rhodecode.events import RepoGroupEvent
-from rhodecode.config.middleware import _bool_setting, _string_setting
+from rhodecode.config.middleware import (
+    _bool_setting, _string_setting, _int_setting)
 
 from .events import ModDavSvnConfigChange
 from .subscribers import generate_config_subscriber, AsyncSubprocessSubscriber
 from . import config_keys
 
 
 log = logging.getLogger(__name__)
 
 
 def includeme(config):
     settings = config.registry.settings
     _sanitize_settings_and_apply_defaults(settings)
 
     if settings[config_keys.generate_config]:
         # Add subscriber to generate the Apache mod dav svn configuration on
         # repository group events.
         config.add_subscriber(generate_config_subscriber, RepoGroupEvent)
 
         # Prepare reload command to pass it to the subprocess module and add a
         # subscriber to execute it on configuration changes.
         cmd = settings[config_keys.reload_command]
         cmd = cmd.split(' ') if cmd else cmd
         config.add_subscriber(
             AsyncSubprocessSubscriber(cmd=cmd, timeout=5),
             ModDavSvnConfigChange)
 
 
 def _sanitize_settings_and_apply_defaults(settings):
     """
     Set defaults, convert to python types and validate settings.
     """
-    # Convert bool settings from string to bool.
     _bool_setting(settings, config_keys.generate_config, 'false')
     _bool_setting(settings, config_keys.list_parent_path, 'true')
+    _int_setting(settings, config_keys.reload_timeout, 10)
     _string_setting(settings, config_keys.config_file_path, '', lower=False)
     _string_setting(settings, config_keys.location_root, '/', lower=False)
     _string_setting(settings, config_keys.reload_command, '', lower=False)
 
+    # Convert negative timeout values to zero.
+    if settings[config_keys.reload_timeout] < 0:
+        settings[config_keys.reload_timeout] = 0
+
     # Append path separator to location root.
     settings[config_keys.location_root] = _append_path_sep(
         settings[config_keys.location_root])
 
     # Validate settings.
     if settings[config_keys.generate_config]:
         assert len(settings[config_keys.config_file_path]) > 0
 
 
 def _append_path_sep(path):
     """
     Append the path separator if missing.
     """
     if isinstance(path, basestring) and not path.endswith(os.path.sep):
         path += os.path.sep
     return path

rhodecode/svn_support/config_keys.py

@@ -1,28 +1,29 b''
 # -*- coding: utf-8 -*-
 
 # Copyright (C) 2016-2016  RhodeCode GmbH
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License, version 3
 # (only), as published by the Free Software Foundation.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 # This program is dual-licensed. If you wish to learn more about the
 # RhodeCode Enterprise Edition, including its added features, Support services,
 # and proprietary license terms, please see https://rhodecode.com/licenses/
 
 
 # Definition of setting keys used to configure this module. Defined here to
 # avoid repetition of keys throughout the module.
 config_file_path = 'svn.proxy.config_file_path'
 generate_config = 'svn.proxy.generate_config'
 list_parent_path = 'svn.proxy.list_parent_path'
 location_root = 'svn.proxy.location_root'
 reload_command = 'svn.proxy.reload_cmd'
+reload_timeout = 'svn.proxy.reload_timeout'