Merge pull request #12894 from Carreau/suggest-xonsh

Inform user they shoudl use Xonsh instead of system shell

docs/source/interactive/shell.rst

@@ -1,198 +1,214 b''
 .. _ipython_as_shell:
 
+.. note::
+
+   This page has been kept for historical reason. You most likely want to use
+   `Xonsh <https://xon.sh/>`__ instead of this.
+
+
 =========================
 IPython as a system shell
 =========================
 
 
 
 Overview
 ========
 
 It is possible to adapt IPython for system shell usage. In the past, IPython
 shipped a special 'sh' profile for this purpose, but it had been quarantined
 since 0.11 release, and in 1.0 it was removed altogether. Nevertheless, much
 of this section relies on machinery which does not require a custom profile.
 
 You can set up your own 'sh' :ref:`profile <Profiles>` to be different from
 the default profile such that:
 
  * Prompt shows the current directory (see `Prompt customization`_)
  * Make system commands directly available (in alias table) by running the
    ``%rehashx`` magic. If you install new programs along your PATH, you might
    want to run ``%rehashx`` to update the alias table
  * turn ``%autocall`` to full mode
 
 
 Environment variables
 =====================
 
 Rather than manipulating os.environ directly, you may like to use the magic
 `%env` command.  With no arguments, this displays all environment variables
 and values.  To get the value of a specific variable, use `%env var`.  To set
 the value of a specific variable, use `%env foo bar`, `%env foo=bar`.  By
 default values are considered to be strings so quoting them is unnecessary.
 However, Python variables are expanded as usual in the magic command, so
 `%env foo=$bar` means "set the environment variable foo to the value of the
 Python variable `bar`".
 
 Aliases
 =======
 
 Once you run ``%rehashx``, all of your $PATH has been loaded as IPython aliases,
 so you should be able to type any normal system command and have it executed.
 See ``%alias?``  and ``%unalias?`` for details on the alias facilities. See also
 ``%rehashx?`` for details on the mechanism used to load $PATH.
 
+.. warning::
+
+   See info at the top of the page. You most likely want to use
+   `Xonsh <https://xon.sh/>`__ instead of this.
 
 Directory management
 ====================
 
 Since each command passed by IPython to the underlying system is executed
 in a subshell which exits immediately, you can NOT use !cd to navigate
 the filesystem.
 
 IPython provides its own builtin ``%cd`` magic command to move in the
 filesystem (the % is not required with automagic on). It also maintains
 a list of visited directories (use ``%dhist`` to see it) and allows direct
 switching to any of them. Type ``cd?`` for more details.
 
 ``%pushd``, ``%popd`` and ``%dirs`` are provided for directory stack handling.
 
 
 Prompt customization
 ====================
 
 See :ref:`custom_prompts`.
 
 
 .. _string_lists:
 
 String lists
 ============
 
 String lists (IPython.utils.text.SList) are handy way to process output
 from system commands. They are produced by ``var = !cmd`` syntax.
 
 First, we acquire the output of 'ls -l'::
 
     [Q:doc/examples]|2> lines = !ls -l
      ==
     ['total 23',
      '-rw-rw-rw- 1 ville None 1163 Sep 30  2006 example-demo.py',
      '-rw-rw-rw- 1 ville None 1927 Sep 30  2006 example-embed-short.py',
      '-rwxrwxrwx 1 ville None 4606 Sep  1 17:15 example-embed.py',
      '-rwxrwxrwx 1 ville None 1017 Sep 30  2006 example-gnuplot.py',
      '-rwxrwxrwx 1 ville None  339 Jun 11 18:01 extension.py',
      '-rwxrwxrwx 1 ville None  113 Dec 20  2006 seteditor.py',
      '-rwxrwxrwx 1 ville None  245 Dec 12  2006 seteditor.pyc']
 
 Now, let's take a look at the contents of 'lines' (the first number is
 the list element number)::
 
     [Q:doc/examples]|3> lines
                     <3> SList (.p, .n, .l, .s, .grep(), .fields() available). Value:
 
     0: total 23
     1: -rw-rw-rw- 1 ville None 1163 Sep 30  2006 example-demo.py
     2: -rw-rw-rw- 1 ville None 1927 Sep 30  2006 example-embed-short.py
     3: -rwxrwxrwx 1 ville None 4606 Sep  1 17:15 example-embed.py
     4: -rwxrwxrwx 1 ville None 1017 Sep 30  2006 example-gnuplot.py
     5: -rwxrwxrwx 1 ville None  339 Jun 11 18:01 extension.py
     6: -rwxrwxrwx 1 ville None  113 Dec 20  2006 seteditor.py
     7: -rwxrwxrwx 1 ville None  245 Dec 12  2006 seteditor.pyc
 
 Now, let's filter out the 'embed' lines::
 
     [Q:doc/examples]|4> l2 = lines.grep('embed',prune=1)
     [Q:doc/examples]|5> l2
                     <5> SList (.p, .n, .l, .s, .grep(), .fields() available). Value:
 
     0: total 23
     1: -rw-rw-rw- 1 ville None 1163 Sep 30  2006 example-demo.py
     2: -rwxrwxrwx 1 ville None 1017 Sep 30  2006 example-gnuplot.py
     3: -rwxrwxrwx 1 ville None  339 Jun 11 18:01 extension.py
     4: -rwxrwxrwx 1 ville None  113 Dec 20  2006 seteditor.py
     5: -rwxrwxrwx 1 ville None  245 Dec 12  2006 seteditor.pyc
 
 Now, we want strings having just file names and permissions::
 
     [Q:doc/examples]|6> l2.fields(8,0)
                     <6> SList (.p, .n, .l, .s, .grep(), .fields() available). Value:
 
     0: total
     1: example-demo.py -rw-rw-rw-
     2: example-gnuplot.py -rwxrwxrwx
     3: extension.py -rwxrwxrwx
     4: seteditor.py -rwxrwxrwx
     5: seteditor.pyc -rwxrwxrwx
 
 Note how the line with 'total' does not raise IndexError.
 
 If you want to split these (yielding lists), call fields() without
 arguments::
 
     [Q:doc/examples]|7> _.fields()
                     <7>
     [['total'],
      ['example-demo.py', '-rw-rw-rw-'],
      ['example-gnuplot.py', '-rwxrwxrwx'],
      ['extension.py', '-rwxrwxrwx'],
      ['seteditor.py', '-rwxrwxrwx'],
      ['seteditor.pyc', '-rwxrwxrwx']]
 
 If you want to pass these separated with spaces to a command (typical
 for lists if files), use the .s property::
 
 
     [Q:doc/examples]|13> files = l2.fields(8).s
     [Q:doc/examples]|14> files
                     <14> 'example-demo.py example-gnuplot.py extension.py seteditor.py seteditor.pyc'
     [Q:doc/examples]|15> ls $files
     example-demo.py  example-gnuplot.py  extension.py  seteditor.py  seteditor.pyc
 
 SLists are inherited from normal Python lists, so every list method is
 available::
 
     [Q:doc/examples]|21> lines.append('hey')
 
 
 Real world example: remove all files outside version control
 ------------------------------------------------------------
 
 First, capture output of "hg status"::
 
     [Q:/ipython]|28> out = !hg status
      ==
     ['M IPython\\extensions\\ipy_kitcfg.py',
      'M IPython\\extensions\\ipy_rehashdir.py',
     ...
      '? build\\lib\\IPython\\Debugger.py',
      '? build\\lib\\IPython\\extensions\\InterpreterExec.py',
      '? build\\lib\\IPython\\extensions\\InterpreterPasteInput.py',
     ...
 
 (lines starting with ? are not under version control).
 
 ::
 
     [Q:/ipython]|35> junk = out.grep(r'^\?').fields(1)
     [Q:/ipython]|36> junk
                 <36> SList (.p, .n, .l, .s, .grep(), .fields() availab
     ...
     10: build\bdist.win32\winexe\temp\_ctypes.py
     11: build\bdist.win32\winexe\temp\_hashlib.py
     12: build\bdist.win32\winexe\temp\_socket.py
 
 Now we can just remove these files by doing 'rm $junk.s'.
 
 The .n, .s, .p properties
 -------------------------
 
 Properties of `SList <https://ipython.readthedocs.io/en/stable/api/generated/IPython.utils.text.html?highlight=SList#IPython.utils.text.SList>`_ wrapper
 provide a convenient ways to use contained text in different formats:
 
 * ``.n`` returns (original) string with lines separated by a newline
 * ``.s`` returns string with lines separated by single space (for
   convenient passing to system commands)
 * ``.p`` returns list of "path" objects from detected file names
+
+.. error::
+
+   You went too far scroll back up. You most likely want to use
+   `Xonsh <https://xon.sh/>`__ instead of this.
+