histedit: improve roll action integration with fold

Previously the fold action would inspect it's class to figure out if it was a
rollup or not. This was hacky. Now that finishfold is inside the fold class,
let's modify it to check a function (which roll can override) to determine if it
should be prompting for a commit message.

hgext/histedit.py

@@ -1,1191 +1,1191 b''
 # histedit.py - interactive history editing for mercurial
 #
 # Copyright 2009 Augie Fackler <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 """interactive history editing
 
 With this extension installed, Mercurial gains one new command: histedit. Usage
 is as follows, assuming the following history::
 
  @  3[tip]   7c2fd3b9020c   2009-04-27 18:04 -0500   durin42
  |    Add delta
  |
  o  2   030b686bedc4   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  1   c561b4e977df   2009-04-27 18:04 -0500   durin42
  |    Add beta
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 If you were to run ``hg histedit c561b4e977df``, you would see the following
 file open in your editor::
 
  pick c561b4e977df Add beta
  pick 030b686bedc4 Add gamma
  pick 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit message without changing commit content
  #
 
 In this file, lines beginning with ``#`` are ignored. You must specify a rule
 for each revision in your history. For example, if you had meant to add gamma
 before beta, and then wanted to add delta in the same revision as beta, you
 would reorganize the file to look like this::
 
  pick 030b686bedc4 Add gamma
  pick c561b4e977df Add beta
  fold 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit message without changing commit content
  #
 
 At which point you close the editor and ``histedit`` starts working. When you
 specify a ``fold`` operation, ``histedit`` will open an editor when it folds
 those revisions together, offering you a chance to clean up the commit message::
 
  Add beta
  ***
  Add delta
 
 Edit the commit message to your liking, then close the editor. For
 this example, let's assume that the commit message was changed to
 ``Add beta and delta.`` After histedit has run and had a chance to
 remove any old or temporary revisions it needed, the history looks
 like this::
 
  @  2[tip]   989b4d060121   2009-04-27 18:04 -0500   durin42
  |    Add beta and delta.
  |
  o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 Note that ``histedit`` does *not* remove any revisions (even its own temporary
 ones) until after it has completed all the editing operations, so it will
 probably perform several strip operations when it's done. For the above example,
 it had to run strip twice. Strip can be slow depending on a variety of factors,
 so you might need to be a little patient. You can choose to keep the original
 revisions by passing the ``--keep`` flag.
 
 The ``edit`` operation will drop you back to a command prompt,
 allowing you to edit files freely, or even use ``hg record`` to commit
 some changes as a separate commit. When you're done, any remaining
 uncommitted changes will be committed as well. When done, run ``hg
 histedit --continue`` to finish this step. You'll be prompted for a
 new commit message, but the default commit message will be the
 original message for the ``edit`` ed revision.
 
 The ``message`` operation will give you a chance to revise a commit
 message without changing the contents. It's a shortcut for doing
 ``edit`` immediately followed by `hg histedit --continue``.
 
 If ``histedit`` encounters a conflict when moving a revision (while
 handling ``pick`` or ``fold``), it'll stop in a similar manner to
 ``edit`` with the difference that it won't prompt you for a commit
 message when done. If you decide at this point that you don't like how
 much work it will be to rearrange history, or that you made a mistake,
 you can use ``hg histedit --abort`` to abandon the new changes you
 have made and return to the state before you attempted to edit your
 history.
 
 If we clone the histedit-ed example repository above and add four more
 changes, such that we have the following history::
 
    @  6[tip]   038383181893   2009-04-27 18:04 -0500   stefan
    |    Add theta
    |
    o  5   140988835471   2009-04-27 18:04 -0500   stefan
    |    Add eta
    |
    o  4   122930637314   2009-04-27 18:04 -0500   stefan
    |    Add zeta
    |
    o  3   836302820282   2009-04-27 18:04 -0500   stefan
    |    Add epsilon
    |
    o  2   989b4d060121   2009-04-27 18:04 -0500   durin42
    |    Add beta and delta.
    |
    o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
    |    Add gamma
    |
    o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
         Add alpha
 
 If you run ``hg histedit --outgoing`` on the clone then it is the same
 as running ``hg histedit 836302820282``. If you need plan to push to a
 repository that Mercurial does not detect to be related to the source
 repo, you can add a ``--force`` option.
 
 Histedit rule lines are truncated to 80 characters by default. You
 can customise this behaviour by setting a different length in your
 configuration file:
 
 [histedit]
 linelen = 120      # truncate rule lines at 120 characters
 """
 
 try:
     import cPickle as pickle
     pickle.dump # import now
 except ImportError:
     import pickle
 import errno
 import inspect
 import os
 import sys
 
 from mercurial import cmdutil
 from mercurial import discovery
 from mercurial import error
 from mercurial import changegroup
 from mercurial import copies
 from mercurial import context
 from mercurial import exchange
 from mercurial import extensions
 from mercurial import hg
 from mercurial import node
 from mercurial import repair
 from mercurial import scmutil
 from mercurial import util
 from mercurial import obsolete
 from mercurial import merge as mergemod
 from mercurial.lock import release
 from mercurial.i18n import _
 
 cmdtable = {}
 command = cmdutil.command(cmdtable)
 
 testedwith = 'internal'
 
 # i18n: command names and abbreviations must remain untranslated
 editcomment = _("""# Edit history between %s and %s
 #
 # Commits are listed from least to most recent
 #
 # Commands:
 #  p, pick = use commit
 #  e, edit = use commit, but stop for amending
 #  f, fold = use commit, but combine it with the one above
 #  r, roll = like fold, but discard this commit's description
 #  d, drop = remove commit from history
 #  m, mess = edit message without changing commit content
 #
 """)
 
 class histeditstate(object):
     def __init__(self, repo, parentctxnode=None, rules=None, keep=None,
             topmost=None, replacements=None, lock=None, wlock=None):
         self.repo = repo
         self.rules = rules
         self.keep = keep
         self.topmost = topmost
         self.parentctxnode = parentctxnode
         self.lock = lock
         self.wlock = wlock
         self.backupfile = None
         if replacements is None:
             self.replacements = []
         else:
             self.replacements = replacements
 
     def read(self):
         """Load histedit state from disk and set fields appropriately."""
         try:
             fp = self.repo.vfs('histedit-state', 'r')
         except IOError, err:
             if err.errno != errno.ENOENT:
                 raise
             raise util.Abort(_('no histedit in progress'))
 
         try:
             data = pickle.load(fp)
             parentctxnode, rules, keep, topmost, replacements = data
             backupfile = None
         except pickle.UnpicklingError:
             data = self._load()
             parentctxnode, rules, keep, topmost, replacements, backupfile = data
 
         self.parentctxnode = parentctxnode
         self.rules = rules
         self.keep = keep
         self.topmost = topmost
         self.replacements = replacements
         self.backupfile = backupfile
 
     def write(self):
         fp = self.repo.vfs('histedit-state', 'w')
         fp.write('v1\n')
         fp.write('%s\n' % node.hex(self.parentctxnode))
         fp.write('%s\n' % node.hex(self.topmost))
         fp.write('%s\n' % self.keep)
         fp.write('%d\n' % len(self.rules))
         for rule in self.rules:
             fp.write('%s%s\n' % (rule[1], rule[0]))
         fp.write('%d\n' % len(self.replacements))
         for replacement in self.replacements:
             fp.write('%s%s\n' % (node.hex(replacement[0]), ''.join(node.hex(r)
                 for r in replacement[1])))
         fp.write('%s\n' % self.backupfile)
         fp.close()
 
     def _load(self):
         fp = self.repo.vfs('histedit-state', 'r')
         lines = [l[:-1] for l in fp.readlines()]
 
         index = 0
         lines[index] # version number
         index += 1
 
         parentctxnode = node.bin(lines[index])
         index += 1
 
         topmost = node.bin(lines[index])
         index += 1
 
         keep = lines[index] == 'True'
         index += 1
 
         # Rules
         rules = []
         rulelen = int(lines[index])
         index += 1
         for i in xrange(rulelen):
             rule = lines[index]
             rulehash = rule[:40]
             ruleaction = rule[40:]
             rules.append((ruleaction, rulehash))
             index += 1
 
         # Replacements
         replacements = []
         replacementlen = int(lines[index])
         index += 1
         for i in xrange(replacementlen):
             replacement = lines[index]
             original = node.bin(replacement[:40])
             succ = [node.bin(replacement[i:i + 40]) for i in
                     range(40, len(replacement), 40)]
             replacements.append((original, succ))
             index += 1
 
         backupfile = lines[index]
         index += 1
 
         fp.close()
 
         return parentctxnode, rules, keep, topmost, replacements, backupfile
 
     def clear(self):
         self.repo.vfs.unlink('histedit-state')
 
 class histeditaction(object):
     def __init__(self, state, node):
         self.state = state
         self.repo = state.repo
         self.node = node
 
     @classmethod
     def fromrule(cls, state, rule):
         """Parses the given rule, returning an instance of the histeditaction.
         """
         repo = state.repo
         rulehash = rule.strip().split(' ', 1)[0]
         try:
             node = repo[rulehash].node()
         except error.RepoError:
             raise util.Abort(_('unknown changeset %s listed') % rulehash[:12])
         return cls(state, node)
 
     def run(self):
         """Runs the action. The default behavior is simply apply the action's
         rulectx onto the current parentctx."""
         self.applychange()
         self.continuedirty()
         return self.continueclean()
 
     def applychange(self):
         """Applies the changes from this action's rulectx onto the current
         parentctx, but does not commit them."""
         repo = self.repo
         rulectx = repo[self.node]
         hg.update(repo, self.state.parentctxnode)
         stats = applychanges(repo.ui, repo, rulectx, {})
         if stats and stats[3] > 0:
             raise error.InterventionRequired(_('Fix up the change and run '
                                             'hg histedit --continue'))
 
     def continuedirty(self):
         """Continues the action when changes have been applied to the working
         copy. The default behavior is to commit the dirty changes."""
         repo = self.repo
         rulectx = repo[self.node]
 
         editor = self.commiteditor()
         commit = commitfuncfor(repo, rulectx)
 
         commit(text=rulectx.description(), user=rulectx.user(),
                date=rulectx.date(), extra=rulectx.extra(), editor=editor)
 
     def commiteditor(self):
         """The editor to be used to edit the commit message."""
         return False
 
     def continueclean(self):
         """Continues the action when the working copy is clean. The default
         behavior is to accept the current commit as the new version of the
         rulectx."""
         ctx = self.repo['.']
         if ctx.node() == self.state.parentctxnode:
             self.repo.ui.warn(_('%s: empty changeset\n') %
                               node.short(self.node))
             return ctx, [(self.node, tuple())]
         if ctx.node() == self.node:
             # Nothing changed
             return ctx, []
         return ctx, [(self.node, (ctx.node(),))]
 
 def commitfuncfor(repo, src):
     """Build a commit function for the replacement of <src>
 
     This function ensure we apply the same treatment to all changesets.
 
     - Add a 'histedit_source' entry in extra.
 
     Note that fold have its own separated logic because its handling is a bit
     different and not easily factored out of the fold method.
     """
     phasemin = src.phase()
     def commitfunc(**kwargs):
         phasebackup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             repo.ui.setconfig('phases', 'new-commit', phasemin,
                               'histedit')
             extra = kwargs.get('extra', {}).copy()
             extra['histedit_source'] = src.hex()
             kwargs['extra'] = extra
             return repo.commit(**kwargs)
         finally:
             repo.ui.restoreconfig(phasebackup)
     return commitfunc
 
 def applychanges(ui, repo, ctx, opts):
     """Merge changeset from ctx (only) in the current working directory"""
     wcpar = repo.dirstate.parents()[0]
     if ctx.p1().node() == wcpar:
         # edition ar "in place" we do not need to make any merge,
         # just applies changes on parent for edition
         cmdutil.revert(ui, repo, ctx, (wcpar, node.nullid), all=True)
         stats = None
     else:
         try:
             # ui.forcemerge is an internal variable, do not document
             repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                               'histedit')
             stats = mergemod.graft(repo, ctx, ctx.p1(), ['local', 'histedit'])
         finally:
             repo.ui.setconfig('ui', 'forcemerge', '', 'histedit')
     return stats
 
 def collapse(repo, first, last, commitopts):
     """collapse the set of revisions from first to last as new one.
 
     Expected commit options are:
         - message
         - date
         - username
     Commit message is edited in all cases.
 
     This function works in memory."""
     ctxs = list(repo.set('%d::%d', first, last))
     if not ctxs:
         return None
     base = first.parents()[0]
 
     # commit a new version of the old changeset, including the update
     # collect all files which might be affected
     files = set()
     for ctx in ctxs:
         files.update(ctx.files())
 
     # Recompute copies (avoid recording a -> b -> a)
     copied = copies.pathcopies(base, last)
 
     # prune files which were reverted by the updates
     def samefile(f):
         if f in last.manifest():
             a = last.filectx(f)
             if f in base.manifest():
                 b = base.filectx(f)
                 return (a.data() == b.data()
                         and a.flags() == b.flags())
             else:
                 return False
         else:
             return f not in base.manifest()
     files = [f for f in files if not samefile(f)]
     # commit version of these files as defined by head
     headmf = last.manifest()
     def filectxfn(repo, ctx, path):
         if path in headmf:
             fctx = last[path]
             flags = fctx.flags()
             mctx = context.memfilectx(repo,
                                       fctx.path(), fctx.data(),
                                       islink='l' in flags,
                                       isexec='x' in flags,
                                       copied=copied.get(path))
             return mctx
         return None
 
     if commitopts.get('message'):
         message = commitopts['message']
     else:
         message = first.description()
     user = commitopts.get('user')
     date = commitopts.get('date')
     extra = commitopts.get('extra')
 
     parents = (first.p1().node(), first.p2().node())
     editor = None
     if not commitopts.get('rollup'):
         editor = cmdutil.getcommiteditor(edit=True, editform='histedit.fold')
     new = context.memctx(repo,
                          parents=parents,
                          text=message,
                          files=files,
                          filectxfn=filectxfn,
                          user=user,
                          date=date,
                          extra=extra,
                          editor=editor)
     return repo.commitctx(new)
 
 class pick(histeditaction):
     def run(self):
         rulectx = self.repo[self.node]
         if rulectx.parents()[0].node() == self.state.parentctxnode:
             self.repo.ui.debug('node %s unchanged\n' % node.short(self.node))
             return rulectx, []
 
         return super(pick, self).run()
 
 class edit(histeditaction):
     def run(self):
         repo = self.repo
         rulectx = repo[self.node]
         hg.update(repo, self.state.parentctxnode)
         applychanges(repo.ui, repo, rulectx, {})
         raise error.InterventionRequired(
             _('Make changes as needed, you may commit or record as needed '
               'now.\nWhen you are finished, run hg histedit --continue to '
               'resume.'))
 
     def commiteditor(self):
         return cmdutil.getcommiteditor(edit=True, editform='histedit.edit')
 
 class fold(histeditaction):
     def continuedirty(self):
         repo = self.repo
         rulectx = repo[self.node]
 
         commit = commitfuncfor(repo, rulectx)
         commit(text='fold-temp-revision %s' % node.short(self.node),
                user=rulectx.user(), date=rulectx.date(),
                extra=rulectx.extra())
 
     def continueclean(self):
         repo = self.repo
         ctx = repo['.']
         rulectx = repo[self.node]
         parentctxnode = self.state.parentctxnode
         if ctx.node() == parentctxnode:
             repo.ui.warn(_('%s: empty changeset\n') %
                               node.short(self.node))
             return ctx, [(self.node, (parentctxnode,))]
 
         parentctx = repo[parentctxnode]
         newcommits = set(c.node() for c in repo.set('(%d::. - %d)', parentctx,
                                                  parentctx))
         if not newcommits:
             repo.ui.warn(_('%s: cannot fold - working copy is not a '
                            'descendant of previous commit %s\n') %
                            (node.short(self.node), node.short(parentctxnode)))
             return ctx, [(self.node, (ctx.node(),))]
 
         middlecommits = newcommits.copy()
         middlecommits.discard(ctx.node())
 
-        foldopts = {}
-        if isinstance(self, rollup):
-            foldopts['rollup'] = True
+        return self.finishfold(repo.ui, repo, parentctx, rulectx, ctx.node(),
+                               middlecommits)
 
-        return self.finishfold(repo.ui, repo, parentctx, rulectx, ctx.node(),
-                               foldopts, middlecommits)
+    def skipprompt(self):
+        return False
 
-    def finishfold(self, ui, repo, ctx, oldctx, newnode, opts, internalchanges):
+    def finishfold(self, ui, repo, ctx, oldctx, newnode, internalchanges):
         parent = ctx.parents()[0].node()
         hg.update(repo, parent)
         ### prepare new commit data
-        commitopts = opts.copy()
+        commitopts = {}
         commitopts['user'] = ctx.user()
         # commit message
-        if opts.get('rollup'):
+        if self.skipprompt():
             newmessage = ctx.description()
         else:
             newmessage = '\n***\n'.join(
                 [ctx.description()] +
                 [repo[r].description() for r in internalchanges] +
                 [oldctx.description()]) + '\n'
         commitopts['message'] = newmessage
         # date
         commitopts['date'] = max(ctx.date(), oldctx.date())
         extra = ctx.extra().copy()
         # histedit_source
         # note: ctx is likely a temporary commit but that the best we can do
         #       here. This is sufficient to solve issue3681 anyway.
         extra['histedit_source'] = '%s,%s' % (ctx.hex(), oldctx.hex())
         commitopts['extra'] = extra
         phasebackup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             phasemin = max(ctx.phase(), oldctx.phase())
             repo.ui.setconfig('phases', 'new-commit', phasemin, 'histedit')
             n = collapse(repo, ctx, repo[newnode], commitopts)
         finally:
             repo.ui.restoreconfig(phasebackup)
         if n is None:
             return ctx, []
         hg.update(repo, n)
         replacements = [(oldctx.node(), (newnode,)),
                         (ctx.node(), (n,)),
                         (newnode, (n,)),
                        ]
         for ich in internalchanges:
             replacements.append((ich, (n,)))
         return repo[n], replacements
 
 class rollup(fold):
-    pass
+    def skipprompt(self):
+        return True
 
 class drop(histeditaction):
     def run(self):
         parentctx = self.repo[self.state.parentctxnode]
         return parentctx, [(self.node, tuple())]
 
 class message(histeditaction):
     def commiteditor(self):
         return cmdutil.getcommiteditor(edit=True, editform='histedit.mess')
 
 def findoutgoing(ui, repo, remote=None, force=False, opts={}):
     """utility function to find the first outgoing changeset
 
     Used by initialisation code"""
     dest = ui.expandpath(remote or 'default-push', remote or 'default')
     dest, revs = hg.parseurl(dest, None)[:2]
     ui.status(_('comparing with %s\n') % util.hidepassword(dest))
 
     revs, checkout = hg.addbranchrevs(repo, repo, revs, None)
     other = hg.peer(repo, opts, dest)
 
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
 
     outgoing = discovery.findcommonoutgoing(repo, other, revs, force=force)
     if not outgoing.missing:
         raise util.Abort(_('no outgoing ancestors'))
     roots = list(repo.revs("roots(%ln)", outgoing.missing))
     if 1 < len(roots):
         msg = _('there are ambiguous outgoing revisions')
         hint = _('see "hg help histedit" for more detail')
         raise util.Abort(msg, hint=hint)
     return repo.lookup(roots[0])
 
 actiontable = {'p': pick,
                'pick': pick,
                'e': edit,
                'edit': edit,
                'f': fold,
                'fold': fold,
                'r': rollup,
                'roll': rollup,
                'd': drop,
                'drop': drop,
                'm': message,
                'mess': message,
                }
 
 @command('histedit',
     [('', 'commands', '',
       _('read history edits from the specified file'), _('FILE')),
      ('c', 'continue', False, _('continue an edit already in progress')),
      ('', 'edit-plan', False, _('edit remaining actions list')),
      ('k', 'keep', False,
       _("don't strip old nodes after edit is complete")),
      ('', 'abort', False, _('abort an edit in progress')),
      ('o', 'outgoing', False, _('changesets not found in destination')),
      ('f', 'force', False,
       _('force outgoing even for unrelated repositories')),
      ('r', 'rev', [], _('first revision to be edited'), _('REV'))],
      _("ANCESTOR | --outgoing [URL]"))
 def histedit(ui, repo, *freeargs, **opts):
     """interactively edit changeset history
 
     This command edits changesets between ANCESTOR and the parent of
     the working directory.
 
     With --outgoing, this edits changesets not found in the
     destination repository. If URL of the destination is omitted, the
     'default-push' (or 'default') path will be used.
 
     For safety, this command is aborted, also if there are ambiguous
     outgoing revisions which may confuse users: for example, there are
     multiple branches containing outgoing revisions.
 
     Use "min(outgoing() and ::.)" or similar revset specification
     instead of --outgoing to specify edit target revision exactly in
     such ambiguous situation. See :hg:`help revsets` for detail about
     selecting revisions.
 
     Returns 0 on success, 1 if user intervention is required (not only
     for intentional "edit" command, but also for resolving unexpected
     conflicts).
     """
     state = histeditstate(repo)
     try:
         state.wlock = repo.wlock()
         state.lock = repo.lock()
         _histedit(ui, repo, state, *freeargs, **opts)
     finally:
         release(state.lock, state.wlock)
 
 def _histedit(ui, repo, state, *freeargs, **opts):
     # TODO only abort if we try and histedit mq patches, not just
     # blanket if mq patches are applied somewhere
     mq = getattr(repo, 'mq', None)
     if mq and mq.applied:
         raise util.Abort(_('source has mq patches applied'))
 
     # basic argument incompatibility processing
     outg = opts.get('outgoing')
     cont = opts.get('continue')
     editplan = opts.get('edit_plan')
     abort = opts.get('abort')
     force = opts.get('force')
     rules = opts.get('commands', '')
     revs = opts.get('rev', [])
     goal = 'new' # This invocation goal, in new, continue, abort
     if force and not outg:
         raise util.Abort(_('--force only allowed with --outgoing'))
     if cont:
         if util.any((outg, abort, revs, freeargs, rules, editplan)):
             raise util.Abort(_('no arguments allowed with --continue'))
         goal = 'continue'
     elif abort:
         if util.any((outg, revs, freeargs, rules, editplan)):
             raise util.Abort(_('no arguments allowed with --abort'))
         goal = 'abort'
     elif editplan:
         if util.any((outg, revs, freeargs)):
             raise util.Abort(_('only --commands argument allowed with'
                                '--edit-plan'))
         goal = 'edit-plan'
     else:
         if os.path.exists(os.path.join(repo.path, 'histedit-state')):
             raise util.Abort(_('history edit already in progress, try '
                                '--continue or --abort'))
         if outg:
             if revs:
                 raise util.Abort(_('no revisions allowed with --outgoing'))
             if len(freeargs) > 1:
                 raise util.Abort(
                     _('only one repo argument allowed with --outgoing'))
         else:
             revs.extend(freeargs)
             if len(revs) == 0:
                 histeditdefault = ui.config('histedit', 'defaultrev')
                 if histeditdefault:
                     revs.append(histeditdefault)
             if len(revs) != 1:
                 raise util.Abort(
                     _('histedit requires exactly one ancestor revision'))
 
 
     replacements = []
     keep = opts.get('keep', False)
 
     # rebuild state
     if goal == 'continue':
         state.read()
         state = bootstrapcontinue(ui, state, opts)
     elif goal == 'edit-plan':
         state.read()
         if not rules:
             comment = editcomment % (state.parentctx, node.short(state.topmost))
             rules = ruleeditor(repo, ui, state.rules, comment)
         else:
             if rules == '-':
                 f = sys.stdin
             else:
                 f = open(rules)
             rules = f.read()
             f.close()
         rules = [l for l in (r.strip() for r in rules.splitlines())
                  if l and not l.startswith('#')]
         rules = verifyrules(rules, repo, [repo[c] for [_a, c] in state.rules])
         state.rules = rules
         state.write()
         return
     elif goal == 'abort':
         state.read()
         mapping, tmpnodes, leafs, _ntm = processreplacement(state)
         ui.debug('restore wc to old parent %s\n' % node.short(state.topmost))
 
         # Recover our old commits if necessary
         if not state.topmost in repo and state.backupfile:
             backupfile = repo.join(state.backupfile)
             f = hg.openpath(ui, backupfile)
             gen = exchange.readbundle(ui, f, backupfile)
             changegroup.addchangegroup(repo, gen, 'histedit',
                                        'bundle:' + backupfile)
             os.remove(backupfile)
 
         # check whether we should update away
         parentnodes = [c.node() for c in repo[None].parents()]
         for n in leafs | set([state.parentctxnode]):
             if n in parentnodes:
                 hg.clean(repo, state.topmost)
                 break
         else:
             pass
         cleanupnode(ui, repo, 'created', tmpnodes)
         cleanupnode(ui, repo, 'temp', leafs)
         state.clear()
         return
     else:
         cmdutil.checkunfinished(repo)
         cmdutil.bailifchanged(repo)
 
         topmost, empty = repo.dirstate.parents()
         if outg:
             if freeargs:
                 remote = freeargs[0]
             else:
                 remote = None
             root = findoutgoing(ui, repo, remote, force, opts)
         else:
             rr = list(repo.set('roots(%ld)', scmutil.revrange(repo, revs)))
             if len(rr) != 1:
                 raise util.Abort(_('The specified revisions must have '
                     'exactly one common root'))
             root = rr[0].node()
 
         revs = between(repo, root, topmost, keep)
         if not revs:
             raise util.Abort(_('%s is not an ancestor of working directory') %
                              node.short(root))
 
         ctxs = [repo[r] for r in revs]
         if not rules:
             comment = editcomment % (node.short(root), node.short(topmost))
             rules = ruleeditor(repo, ui, [['pick', c] for c in ctxs], comment)
         else:
             if rules == '-':
                 f = sys.stdin
             else:
                 f = open(rules)
             rules = f.read()
             f.close()
         rules = [l for l in (r.strip() for r in rules.splitlines())
                  if l and not l.startswith('#')]
         rules = verifyrules(rules, repo, ctxs)
 
         parentctxnode = repo[root].parents()[0].node()
 
         state.parentctxnode = parentctxnode
         state.rules = rules
         state.keep = keep
         state.topmost = topmost
         state.replacements = replacements
 
         # Create a backup so we can always abort completely.
         backupfile = None
         if not obsolete.isenabled(repo, obsolete.createmarkersopt):
             backupfile = repair._bundle(repo, [parentctxnode], [topmost], root,
                                         'histedit')
         state.backupfile = backupfile
 
     while state.rules:
         state.write()
         action, ha = state.rules.pop(0)
         ui.debug('histedit: processing %s %s\n' % (action, ha[:12]))
         act = actiontable[action]
         if inspect.isclass(act):
             actobj = act.fromrule(state, ha)
             parentctx, replacement_ = actobj.run()
         else:
             parentctx, replacement_ = act(ui, state, ha, opts)
         state.parentctxnode = parentctx.node()
         state.replacements.extend(replacement_)
     state.write()
 
     hg.update(repo, state.parentctxnode)
 
     mapping, tmpnodes, created, ntm = processreplacement(state)
     if mapping:
         for prec, succs in mapping.iteritems():
             if not succs:
                 ui.debug('histedit: %s is dropped\n' % node.short(prec))
             else:
                 ui.debug('histedit: %s is replaced by %s\n' % (
                     node.short(prec), node.short(succs[0])))
                 if len(succs) > 1:
                     m = 'histedit:                            %s'
                     for n in succs[1:]:
                         ui.debug(m % node.short(n))
 
     if not keep:
         if mapping:
             movebookmarks(ui, repo, mapping, state.topmost, ntm)
             # TODO update mq state
         if obsolete.isenabled(repo, obsolete.createmarkersopt):
             markers = []
             # sort by revision number because it sound "right"
             for prec in sorted(mapping, key=repo.changelog.rev):
                 succs = mapping[prec]
                 markers.append((repo[prec],
                                 tuple(repo[s] for s in succs)))
             if markers:
                 obsolete.createmarkers(repo, markers)
         else:
             cleanupnode(ui, repo, 'replaced', mapping)
 
     cleanupnode(ui, repo, 'temp', tmpnodes)
     state.clear()
     if os.path.exists(repo.sjoin('undo')):
         os.unlink(repo.sjoin('undo'))
 
 def gatherchildren(repo, ctx):
     # is there any new commit between the expected parent and "."
     #
     # note: does not take non linear new change in account (but previous
     #       implementation didn't used them anyway (issue3655)
     newchildren = [c.node() for c in repo.set('(%d::.)', ctx)]
     if ctx.node() != node.nullid:
         if not newchildren:
             return []
         newchildren.pop(0)  # remove ctx
     return newchildren
 
 def bootstrapcontinue(ui, state, opts):
     repo, parentctxnode = state.repo, state.parentctxnode
     action, currentnode = state.rules.pop(0)
 
     s = repo.status()
     replacements = []
 
     act = actiontable[action]
     if inspect.isclass(act):
         actobj = act.fromrule(state, currentnode)
         if s.modified or s.added or s.removed or s.deleted:
             actobj.continuedirty()
             s = repo.status()
             if s.modified or s.added or s.removed or s.deleted:
                 raise util.Abort(_("working copy still dirty"))
 
         parentctx, replacements_ = actobj.continueclean()
         replacements.extend(replacements_)
     else:
         parentctx = repo[parentctxnode]
         ctx = repo[currentnode]
         newchildren = gatherchildren(repo, parentctx)
         # Commit dirty working directory if necessary
         new = None
         if s.modified or s.added or s.removed or s.deleted:
             # prepare the message for the commit to comes
             message = ctx.description()
             editor = cmdutil.getcommiteditor()
             commit = commitfuncfor(repo, ctx)
             new = commit(text=message, user=ctx.user(), date=ctx.date(),
                          extra=ctx.extra(), editor=editor)
             if new is not None:
                 newchildren.append(new)
 
         # track replacements
         if ctx.node() not in newchildren:
             # note: new children may be empty when the changeset is dropped.
             # this happen e.g during conflicting pick where we revert content
             # to parent.
             replacements.append((ctx.node(), tuple(newchildren)))
 
         if newchildren:
             # otherwise update "parentctx" before proceeding further
             parentctx = repo[newchildren[-1]]
 
     state.parentctxnode = parentctx.node()
     state.replacements.extend(replacements)
 
     return state
 
 def between(repo, old, new, keep):
     """select and validate the set of revision to edit
 
     When keep is false, the specified set can't have children."""
     ctxs = list(repo.set('%n::%n', old, new))
     if ctxs and not keep:
         if (not obsolete.isenabled(repo, obsolete.allowunstableopt) and
             repo.revs('(%ld::) - (%ld)', ctxs, ctxs)):
             raise util.Abort(_('cannot edit history that would orphan nodes'))
         if repo.revs('(%ld) and merge()', ctxs):
             raise util.Abort(_('cannot edit history that contains merges'))
         root = ctxs[0] # list is already sorted by repo.set
         if not root.mutable():
             raise util.Abort(_('cannot edit immutable changeset: %s') % root)
     return [c.node() for c in ctxs]
 
 def makedesc(repo, action, rev):
     """build a initial action line for a ctx
 
     line are in the form:
 
       <action> <hash> <rev> <summary>
     """
     ctx = repo[rev]
     summary = ''
     if ctx.description():
         summary = ctx.description().splitlines()[0]
     line = '%s %s %d %s' % (action, ctx, ctx.rev(), summary)
     # trim to 80 columns so it's not stupidly wide in my editor
     maxlen = repo.ui.configint('histedit', 'linelen', default=80)
     maxlen = max(maxlen, 22) # avoid truncating hash
     return util.ellipsis(line, maxlen)
 
 def ruleeditor(repo, ui, rules, editcomment=""):
     """open an editor to edit rules
 
     rules are in the format [ [act, ctx], ...] like in state.rules
     """
     rules = '\n'.join([makedesc(repo, act, rev) for [act, rev] in rules])
     rules += '\n\n'
     rules += editcomment
     rules = ui.edit(rules, ui.username())
 
     # Save edit rules in .hg/histedit-last-edit.txt in case
     # the user needs to ask for help after something
     # surprising happens.
     f = open(repo.join('histedit-last-edit.txt'), 'w')
     f.write(rules)
     f.close()
 
     return rules
 
 def verifyrules(rules, repo, ctxs):
     """Verify that there exists exactly one edit rule per given changeset.
 
     Will abort if there are to many or too few rules, a malformed rule,
     or a rule on a changeset outside of the user-given range.
     """
     parsed = []
     expected = set(c.hex() for c in ctxs)
     seen = set()
     for r in rules:
         if ' ' not in r:
             raise util.Abort(_('malformed line "%s"') % r)
         action, rest = r.split(' ', 1)
         ha = rest.strip().split(' ', 1)[0]
         try:
             ha = repo[ha].hex()
         except error.RepoError:
             raise util.Abort(_('unknown changeset %s listed') % ha[:12])
         if ha not in expected:
             raise util.Abort(
                 _('may not use changesets other than the ones listed'))
         if ha in seen:
             raise util.Abort(_('duplicated command for changeset %s') %
                     ha[:12])
         seen.add(ha)
         if action not in actiontable:
             raise util.Abort(_('unknown action "%s"') % action)
         parsed.append([action, ha])
     missing = sorted(expected - seen)  # sort to stabilize output
     if missing:
         raise util.Abort(_('missing rules for changeset %s') %
                 missing[0][:12],
                 hint=_('do you want to use the drop action?'))
     return parsed
 
 def processreplacement(state):
     """process the list of replacements to return
 
     1) the final mapping between original and created nodes
     2) the list of temporary node created by histedit
     3) the list of new commit created by histedit"""
     replacements = state.replacements
     allsuccs = set()
     replaced = set()
     fullmapping = {}
     # initialise basic set
     # fullmapping record all operation recorded in replacement
     for rep in replacements:
         allsuccs.update(rep[1])
         replaced.add(rep[0])
         fullmapping.setdefault(rep[0], set()).update(rep[1])
     new = allsuccs - replaced
     tmpnodes = allsuccs & replaced
     # Reduce content fullmapping  into direct relation between original nodes
     # and final node created during history edition
     # Dropped changeset are replaced by an empty list
     toproceed = set(fullmapping)
     final = {}
     while toproceed:
         for x in list(toproceed):
             succs = fullmapping[x]
             for s in list(succs):
                 if s in toproceed:
                     # non final node with unknown closure
                     # We can't process this now
                     break
                 elif s in final:
                     # non final node, replace with closure
                     succs.remove(s)
                     succs.update(final[s])
             else:
                 final[x] = succs
                 toproceed.remove(x)
     # remove tmpnodes from final mapping
     for n in tmpnodes:
         del final[n]
     # we expect all changes involved in final to exist in the repo
     # turn `final` into list (topologically sorted)
     nm = state.repo.changelog.nodemap
     for prec, succs in final.items():
         final[prec] = sorted(succs, key=nm.get)
 
     # computed topmost element (necessary for bookmark)
     if new:
         newtopmost = sorted(new, key=state.repo.changelog.rev)[-1]
     elif not final:
         # Nothing rewritten at all. we won't need `newtopmost`
         # It is the same as `oldtopmost` and `processreplacement` know it
         newtopmost = None
     else:
         # every body died. The newtopmost is the parent of the root.
         r = state.repo.changelog.rev
         newtopmost = state.repo[sorted(final, key=r)[0]].p1().node()
 
     return final, tmpnodes, new, newtopmost
 
 def movebookmarks(ui, repo, mapping, oldtopmost, newtopmost):
     """Move bookmark from old to newly created node"""
     if not mapping:
         # if nothing got rewritten there is not purpose for this function
         return
     moves = []
     for bk, old in sorted(repo._bookmarks.iteritems()):
         if old == oldtopmost:
             # special case ensure bookmark stay on tip.
             #
             # This is arguably a feature and we may only want that for the
             # active bookmark. But the behavior is kept compatible with the old
             # version for now.
             moves.append((bk, newtopmost))
             continue
         base = old
         new = mapping.get(base, None)
         if new is None:
             continue
         while not new:
             # base is killed, trying with parent
             base = repo[base].p1().node()
             new = mapping.get(base, (base,))
             # nothing to move
         moves.append((bk, new[-1]))
     if moves:
         marks = repo._bookmarks
         for mark, new in moves:
             old = marks[mark]
             ui.note(_('histedit: moving bookmarks %s from %s to %s\n')
                     % (mark, node.short(old), node.short(new)))
             marks[mark] = new
         marks.write()
 
 def cleanupnode(ui, repo, name, nodes):
     """strip a group of nodes from the repository
 
     The set of node to strip may contains unknown nodes."""
     ui.debug('should strip %s nodes %s\n' %
              (name, ', '.join([node.short(n) for n in nodes])))
     lock = None
     try:
         lock = repo.lock()
         # Find all node that need to be stripped
         # (we hg %lr instead of %ln to silently ignore unknown item
         nm = repo.changelog.nodemap
         nodes = sorted(n for n in nodes if n in nm)
         roots = [c.node() for c in repo.set("roots(%ln)", nodes)]
         for c in roots:
             # We should process node in reverse order to strip tip most first.
             # but this trigger a bug in changegroup hook.
             # This would reduce bundle overhead
             repair.strip(ui, repo, c)
     finally:
         release(lock)
 
 def stripwrapper(orig, ui, repo, nodelist, *args, **kwargs):
     if isinstance(nodelist, str):
         nodelist = [nodelist]
     if os.path.exists(os.path.join(repo.path, 'histedit-state')):
         state = histeditstate(repo)
         state.read()
         histedit_nodes = set([repo[rulehash].node() for (action, rulehash)
                              in state.rules if rulehash in repo])
         strip_nodes = set([repo[n].node() for n in nodelist])
         common_nodes = histedit_nodes & strip_nodes
         if common_nodes:
             raise util.Abort(_("histedit in progress, can't strip %s")
                              % ', '.join(node.short(x) for x in common_nodes))
     return orig(ui, repo, nodelist, *args, **kwargs)
 
 extensions.wrapfunction(repair, 'strip', stripwrapper)
 
 def summaryhook(ui, repo):
     if not os.path.exists(repo.join('histedit-state')):
         return
     state = histeditstate(repo)
     state.read()
     if state.rules:
         # i18n: column positioning for "hg summary"
         ui.write(_('hist:   %s (histedit --continue)\n') %
                  (ui.label(_('%d remaining'), 'histedit.remaining') %
                   len(state.rules)))
 
 def extsetup(ui):
     cmdutil.summaryhooks.add('histedit', summaryhook)
     cmdutil.unfinishedstates.append(
         ['histedit-state', False, True, _('histedit in progress'),
          _("use 'hg histedit --continue' or 'hg histedit --abort'")])