bundle-ng: move progress handling out of the linkrev callback

mercurial/changegroup.py

@@ -1,420 +1,415
 # changegroup.py - Mercurial changegroup manipulation functions
 #
 #  Copyright 2006 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from i18n import _
 from node import nullrev, hex
 import mdiff, util, dagutil
 import struct, os, bz2, zlib, tempfile
 
 _BUNDLE10_DELTA_HEADER = "20s20s20s20s"
 
 def readexactly(stream, n):
     '''read n bytes from stream.read and abort if less was available'''
     s = stream.read(n)
     if len(s) < n:
         raise util.Abort(_("stream ended unexpectedly"
                            " (got %d bytes, expected %d)")
                           % (len(s), n))
     return s
 
 def getchunk(stream):
     """return the next chunk from stream as a string"""
     d = readexactly(stream, 4)
     l = struct.unpack(">l", d)[0]
     if l <= 4:
         if l:
             raise util.Abort(_("invalid chunk length %d") % l)
         return ""
     return readexactly(stream, l - 4)
 
 def chunkheader(length):
     """return a changegroup chunk header (string)"""
     return struct.pack(">l", length + 4)
 
 def closechunk():
     """return a changegroup chunk header (string) for a zero-length chunk"""
     return struct.pack(">l", 0)
 
 class nocompress(object):
     def compress(self, x):
         return x
     def flush(self):
         return ""
 
 bundletypes = {
     "": ("", nocompress), # only when using unbundle on ssh and old http servers
                           # since the unification ssh accepts a header but there
                           # is no capability signaling it.
     "HG10UN": ("HG10UN", nocompress),
     "HG10BZ": ("HG10", lambda: bz2.BZ2Compressor()),
     "HG10GZ": ("HG10GZ", lambda: zlib.compressobj()),
 }
 
 # hgweb uses this list to communicate its preferred type
 bundlepriority = ['HG10GZ', 'HG10BZ', 'HG10UN']
 
 def writebundle(cg, filename, bundletype):
     """Write a bundle file and return its filename.
 
     Existing files will not be overwritten.
     If no filename is specified, a temporary file is created.
     bz2 compression can be turned off.
     The bundle file will be deleted in case of errors.
     """
 
     fh = None
     cleanup = None
     try:
         if filename:
             fh = open(filename, "wb")
         else:
             fd, filename = tempfile.mkstemp(prefix="hg-bundle-", suffix=".hg")
             fh = os.fdopen(fd, "wb")
         cleanup = filename
 
         header, compressor = bundletypes[bundletype]
         fh.write(header)
         z = compressor()
 
         # parse the changegroup data, otherwise we will block
         # in case of sshrepo because we don't know the end of the stream
 
         # an empty chunkgroup is the end of the changegroup
         # a changegroup has at least 2 chunkgroups (changelog and manifest).
         # after that, an empty chunkgroup is the end of the changegroup
         empty = False
         count = 0
         while not empty or count <= 2:
             empty = True
             count += 1
             while True:
                 chunk = getchunk(cg)
                 if not chunk:
                     break
                 empty = False
                 fh.write(z.compress(chunkheader(len(chunk))))
                 pos = 0
                 while pos < len(chunk):
                     next = pos + 2**20
                     fh.write(z.compress(chunk[pos:next]))
                     pos = next
             fh.write(z.compress(closechunk()))
         fh.write(z.flush())
         cleanup = None
         return filename
     finally:
         if fh is not None:
             fh.close()
         if cleanup is not None:
             os.unlink(cleanup)
 
 def decompressor(fh, alg):
     if alg == 'UN':
         return fh
     elif alg == 'GZ':
         def generator(f):
             zd = zlib.decompressobj()
             for chunk in util.filechunkiter(f):
                 yield zd.decompress(chunk)
     elif alg == 'BZ':
         def generator(f):
             zd = bz2.BZ2Decompressor()
             zd.decompress("BZ")
             for chunk in util.filechunkiter(f, 4096):
                 yield zd.decompress(chunk)
     else:
         raise util.Abort("unknown bundle compression '%s'" % alg)
     return util.chunkbuffer(generator(fh))
 
 class unbundle10(object):
     deltaheader = _BUNDLE10_DELTA_HEADER
     deltaheadersize = struct.calcsize(deltaheader)
     def __init__(self, fh, alg):
         self._stream = decompressor(fh, alg)
         self._type = alg
         self.callback = None
     def compressed(self):
         return self._type != 'UN'
     def read(self, l):
         return self._stream.read(l)
     def seek(self, pos):
         return self._stream.seek(pos)
     def tell(self):
         return self._stream.tell()
     def close(self):
         return self._stream.close()
 
     def chunklength(self):
         d = readexactly(self._stream, 4)
         l = struct.unpack(">l", d)[0]
         if l <= 4:
             if l:
                 raise util.Abort(_("invalid chunk length %d") % l)
             return 0
         if self.callback:
             self.callback()
         return l - 4
 
     def changelogheader(self):
         """v10 does not have a changelog header chunk"""
         return {}
 
     def manifestheader(self):
         """v10 does not have a manifest header chunk"""
         return {}
 
     def filelogheader(self):
         """return the header of the filelogs chunk, v10 only has the filename"""
         l = self.chunklength()
         if not l:
             return {}
         fname = readexactly(self._stream, l)
         return dict(filename=fname)
 
     def _deltaheader(self, headertuple, prevnode):
         node, p1, p2, cs = headertuple
         if prevnode is None:
             deltabase = p1
         else:
             deltabase = prevnode
         return node, p1, p2, deltabase, cs
 
     def deltachunk(self, prevnode):
         l = self.chunklength()
         if not l:
             return {}
         headerdata = readexactly(self._stream, self.deltaheadersize)
         header = struct.unpack(self.deltaheader, headerdata)
         delta = readexactly(self._stream, l - self.deltaheadersize)
         node, p1, p2, deltabase, cs = self._deltaheader(header, prevnode)
         return dict(node=node, p1=p1, p2=p2, cs=cs,
                     deltabase=deltabase, delta=delta)
 
 class headerlessfixup(object):
     def __init__(self, fh, h):
         self._h = h
         self._fh = fh
     def read(self, n):
         if self._h:
             d, self._h = self._h[:n], self._h[n:]
             if len(d) < n:
                 d += readexactly(self._fh, n - len(d))
             return d
         return readexactly(self._fh, n)
 
 def readbundle(fh, fname):
     header = readexactly(fh, 6)
 
     if not fname:
         fname = "stream"
         if not header.startswith('HG') and header.startswith('\0'):
             fh = headerlessfixup(fh, header)
             header = "HG10UN"
 
     magic, version, alg = header[0:2], header[2:4], header[4:6]
 
     if magic != 'HG':
         raise util.Abort(_('%s: not a Mercurial bundle') % fname)
     if version != '10':
         raise util.Abort(_('%s: unknown bundle version %s') % (fname, version))
     return unbundle10(fh, alg)
 
 class bundle10(object):
     deltaheader = _BUNDLE10_DELTA_HEADER
     def __init__(self, repo, bundlecaps=None):
         """Given a source repo, construct a bundler.
 
         bundlecaps is optional and can be used to specify the set of
         capabilities which can be used to build the bundle.
         """
         # Set of capabilities we can use to build the bundle.
         if bundlecaps is None:
             bundlecaps = set()
         self._bundlecaps = bundlecaps
         self._changelog = repo.changelog
         self._manifest = repo.manifest
         reorder = repo.ui.config('bundle', 'reorder', 'auto')
         if reorder == 'auto':
             reorder = None
         else:
             reorder = util.parsebool(reorder)
         self._repo = repo
         self._reorder = reorder
+        self._progress = repo.ui.progress
     def close(self):
         return closechunk()
 
     def fileheader(self, fname):
         return chunkheader(len(fname)) + fname
 
-    def group(self, nodelist, revlog, lookup, reorder=None):
+    def group(self, nodelist, revlog, lookup, units=None, reorder=None):
         """Calculate a delta group, yielding a sequence of changegroup chunks
         (strings).
 
         Given a list of changeset revs, return a set of deltas and
         metadata corresponding to nodes. The first delta is
         first parent(nodelist[0]) -> nodelist[0], the receiver is
         guaranteed to have this parent as it has all history before
         these changesets. In the case firstparent is nullrev the
         changegroup starts with a full revision.
+
+        If units is not None, progress detail will be generated, units specifies
+        the type of revlog that is touched (changelog, manifest, etc.).
         """
-
         # if we don't have any revisions touched by these changesets, bail
         if len(nodelist) == 0:
             yield self.close()
             return
 
         # for generaldelta revlogs, we linearize the revs; this will both be
         # much quicker and generate a much smaller bundle
         if (revlog._generaldelta and reorder is not False) or reorder:
             dag = dagutil.revlogdag(revlog)
             revs = set(revlog.rev(n) for n in nodelist)
             revs = dag.linearize(revs)
         else:
             revs = sorted([revlog.rev(n) for n in nodelist])
 
         # add the parent of the first rev
         p = revlog.parentrevs(revs[0])[0]
         revs.insert(0, p)
 
         # build deltas
+        total = len(revs) - 1
+        msgbundling = _('bundling')
         for r in xrange(len(revs) - 1):
+            if units is not None:
+                self._progress(msgbundling, r + 1, unit=units, total=total)
             prev, curr = revs[r], revs[r + 1]
             linknode = lookup(revlog.node(curr))
             for c in self.revchunk(revlog, curr, prev, linknode):
                 yield c
 
         yield self.close()
 
     def generate(self, commonrevs, clnodes, fastpathlinkrev, source):
         '''yield a sequence of changegroup chunks (strings)'''
         repo = self._repo
         cl = self._changelog
         mf = self._manifest
         reorder = self._reorder
-        progress = repo.ui.progress
-        # Keep track of progress, this is a list since it is modified by revlog
-        # callbacks. First item is the number of items done, second is the
-        # total number to be processed.
-        count = [0, 0]
-        _bundling = _('bundling')
-        _changesets = _('changesets')
-        _manifests = _('manifests')
-        _files = _('files')
+        progress = self._progress
+
+        # for progress output
+        msgbundling = _('bundling')
 
         mfs = {} # needed manifests
         fnodes = {} # needed file nodes
         changedfiles = set()
 
         # filter any nodes that claim to be part of the known set
         def prune(revlog, missing):
             rr, rl = revlog.rev, revlog.linkrev
-            return [n for n in missing
-                    if rl(rr(n)) not in commonrevs]
+            return [n for n in missing if rl(rr(n)) not in commonrevs]
 
         # Callback for the changelog, used to collect changed files and manifest
         # nodes.
         # Returns the linkrev node (identity in the changelog case).
         def lookupcl(x):
             c = cl.read(x)
             changedfiles.update(c[3])
             # record the first changeset introducing this manifest version
             mfs.setdefault(c[0], x)
-            count[0] += 1
-            progress(_bundling, count[0],
-                     unit=_changesets, total=count[1])
             return x
 
         # Callback for the manifest, used to collect linkrevs for filelog
         # revisions.
         # Returns the linkrev node (collected in lookupcl).
         def lookupmf(x):
             clnode = mfs[x]
             if not fastpathlinkrev:
                 mdata = mf.readfast(x)
                 for f, n in mdata.iteritems():
                     if f in changedfiles:
                         # record the first changeset introducing this filelog
                         # version
                         fnodes[f].setdefault(n, clnode)
-            count[0] += 1
-            progress(_bundling, count[0],
-                     unit=_manifests, total=count[1])
             return clnode
 
-        count[:] = [0, len(clnodes)]
-        for chunk in self.group(clnodes, cl, lookupcl, reorder=reorder):
+        for chunk in self.group(clnodes, cl, lookupcl, units=_('changesets'),
+                                reorder=reorder):
             yield chunk
-        progress(_bundling, None)
+        progress(msgbundling, None)
 
         for f in changedfiles:
             fnodes[f] = {}
-        count[:] = [0, len(mfs)]
         mfnodes = prune(mf, mfs)
-        for chunk in self.group(mfnodes, mf, lookupmf, reorder=reorder):
+        for chunk in self.group(mfnodes, mf, lookupmf, units=_('manifests'),
+                                reorder=reorder):
             yield chunk
-        progress(_bundling, None)
+        progress(msgbundling, None)
 
         mfs.clear()
-        count[:] = [0, len(changedfiles)]
-        for fname in sorted(changedfiles):
+        total = len(changedfiles)
+        # for progress output
+        msgfiles = _('files')
+        for i, fname in enumerate(sorted(changedfiles)):
             filerevlog = repo.file(fname)
             if not len(filerevlog):
-                raise util.Abort(_("empty or missing revlog for %s")
-                                 % fname)
+                raise util.Abort(_("empty or missing revlog for %s") % fname)
 
             if fastpathlinkrev:
                 ln, llr = filerevlog.node, filerevlog.linkrev
                 def genfilenodes():
                     for r in filerevlog:
                         linkrev = llr(r)
                         if linkrev not in commonrevs:
                             yield filerevlog.node(r), cl.node(linkrev)
                 fnodes[fname] = dict(genfilenodes())
 
             linkrevnodes = fnodes.pop(fname, {})
             # Lookup for filenodes, we collected the linkrev nodes above in the
             # fastpath case and with lookupmf in the slowpath case.
             def lookupfilelog(x):
-                progress(_bundling, count[0], item=fname,
-                         unit=_files, total=count[1])
                 return linkrevnodes[x]
 
             filenodes = prune(filerevlog, linkrevnodes)
             if filenodes:
-                count[0] += 1
+                progress(msgbundling, i + 1, item=fname, unit=msgfiles,
+                         total=total)
                 yield self.fileheader(fname)
                 for chunk in self.group(filenodes, filerevlog, lookupfilelog,
-                                        reorder):
+                                        reorder=reorder):
                     yield chunk
         yield self.close()
-        progress(_bundling, None)
+        progress(msgbundling, None)
 
         if clnodes:
             repo.hook('outgoing', node=hex(clnodes[0]), source=source)
 
     def revchunk(self, revlog, rev, prev, linknode):
         node = revlog.node(rev)
         p1, p2 = revlog.parentrevs(rev)
         base = prev
 
         prefix = ''
         if base == nullrev:
             delta = revlog.revision(node)
             prefix = mdiff.trivialdiffheader(len(delta))
         else:
             delta = revlog.revdiff(base, rev)
         p1n, p2n = revlog.parents(node)
         basenode = revlog.node(base)
         meta = self.builddeltaheader(node, p1n, p2n, basenode, linknode)
         meta += prefix
         l = len(meta) + len(delta)
         yield chunkheader(l)
         yield meta
         yield delta
     def builddeltaheader(self, node, p1n, p2n, basenode, linknode):
         # do nothing with basenode, it is implicitly the previous one in HG10
         return struct.pack(self.deltaheader, node, p1n, p2n, linknode)