rebase: perform update through the 'update' command

The update logic have grow more and more complicated over time (eg bookmark
movement, new destination logic, warning on other head, etc). The rebase
extension was reimplementing its own basic version of update to be used by 'hg
pull --rebase'. We remove the custom code and use a combination of higher level
functions.

A test is added to check that the update is properly warning about other branch
heads.

hgext/rebase.py

@@ -1,1283 +1,1278 b''
 # rebase.py - rebasing feature for mercurial
 #
 # Copyright 2008 Stefano Tortarolo <stefano.tortarolo at gmail dot com>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 '''command to move sets of revisions to a different ancestor
 
 This extension lets you rebase changesets in an existing Mercurial
 repository.
 
 For more information:
 https://mercurial-scm.org/wiki/RebaseExtension
 '''
 
 from mercurial import hg, util, repair, merge, cmdutil, commands, bookmarks
 from mercurial import extensions, patch, scmutil, phases, obsolete, error
-from mercurial import copies, repoview, revset
+from mercurial import copies, destutil, repoview, revset
 from mercurial.commands import templateopts
 from mercurial.node import nullrev, nullid, hex, short
 from mercurial.lock import release
 from mercurial.i18n import _
 import os, errno
 
 # The following constants are used throughout the rebase module. The ordering of
 # their values must be maintained.
 
 # Indicates that a revision needs to be rebased
 revtodo = -1
 nullmerge = -2
 revignored = -3
 # successor in rebase destination
 revprecursor = -4
 # plain prune (no successor)
 revpruned = -5
 revskipped = (revignored, revprecursor, revpruned)
 
 cmdtable = {}
 command = cmdutil.command(cmdtable)
 # Note for extension authors: ONLY specify testedwith = 'internal' for
 # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
 # be specifying the version(s) of Mercurial they are tested with, or
 # leave the attribute unspecified.
 testedwith = 'internal'
 
 def _nothingtorebase():
     return 1
 
 def _savegraft(ctx, extra):
     s = ctx.extra().get('source', None)
     if s is not None:
         extra['source'] = s
     s = ctx.extra().get('intermediate-source', None)
     if s is not None:
         extra['intermediate-source'] = s
 
 def _savebranch(ctx, extra):
     extra['branch'] = ctx.branch()
 
 def _makeextrafn(copiers):
     """make an extrafn out of the given copy-functions.
 
     A copy function takes a context and an extra dict, and mutates the
     extra dict as needed based on the given context.
     """
     def extrafn(ctx, extra):
         for c in copiers:
             c(ctx, extra)
     return extrafn
 
 def _destrebase(repo):
     # Destination defaults to the latest revision in the
     # current branch
     branch = repo[None].branch()
     return repo[branch].rev()
 
 revsetpredicate = revset.extpredicate()
 
 @revsetpredicate('_destrebase')
 def _revsetdestrebase(repo, subset, x):
     # ``_rebasedefaultdest()``
 
     # default destination for rebase.
     # # XXX: Currently private because I expect the signature to change.
     # # XXX: - taking rev as arguments,
     # # XXX: - bailing out in case of ambiguity vs returning all data.
     # # XXX: - probably merging with the merge destination.
     # i18n: "_rebasedefaultdest" is a keyword
     revset.getargs(x, 0, 0, _("_rebasedefaultdest takes no arguments"))
     return subset & revset.baseset([_destrebase(repo)])
 
 @command('rebase',
     [('s', 'source', '',
      _('rebase the specified changeset and descendants'), _('REV')),
     ('b', 'base', '',
      _('rebase everything from branching point of specified changeset'),
      _('REV')),
     ('r', 'rev', [],
      _('rebase these revisions'),
      _('REV')),
     ('d', 'dest', '',
      _('rebase onto the specified changeset'), _('REV')),
     ('', 'collapse', False, _('collapse the rebased changesets')),
     ('m', 'message', '',
      _('use text as collapse commit message'), _('TEXT')),
     ('e', 'edit', False, _('invoke editor on commit messages')),
     ('l', 'logfile', '',
      _('read collapse commit message from file'), _('FILE')),
     ('k', 'keep', False, _('keep original changesets')),
     ('', 'keepbranches', False, _('keep original branch names')),
     ('D', 'detach', False, _('(DEPRECATED)')),
     ('i', 'interactive', False, _('(DEPRECATED)')),
     ('t', 'tool', '', _('specify merge tool')),
     ('c', 'continue', False, _('continue an interrupted rebase')),
     ('a', 'abort', False, _('abort an interrupted rebase'))] +
      templateopts,
     _('[-s REV | -b REV] [-d REV] [OPTION]'))
 def rebase(ui, repo, **opts):
     """move changeset (and descendants) to a different branch
 
     Rebase uses repeated merging to graft changesets from one part of
     history (the source) onto another (the destination). This can be
     useful for linearizing *local* changes relative to a master
     development tree.
 
     Published commits cannot be rebased (see :hg:`help phases`).
     To copy commits, see :hg:`help graft`.
 
     If you don't specify a destination changeset (``-d/--dest``),
     rebase uses the current branch tip as the destination. (The
     destination changeset is not modified by rebasing, but new
     changesets are added as its descendants.)
 
     Here are the ways to select changesets:
 
       1. Explicitly select them using ``--rev``.
 
       2. Use ``--source`` to select a root changeset and include all of its
          descendants.
 
       3. Use ``--base`` to select a changeset; rebase will find ancestors
          and their descendants which are not also ancestors of the destination.
 
       4. If you do not specify any of ``--rev``, ``source``, or ``--base``,
          rebase will use ``--base .`` as above.
 
     Rebase will destroy original changesets unless you use ``--keep``.
     It will also move your bookmarks (even if you do).
 
     Some changesets may be dropped if they do not contribute changes
     (e.g. merges from the destination branch).
 
     Unlike ``merge``, rebase will do nothing if you are at the branch tip of
     a named branch with two heads. You will need to explicitly specify source
     and/or destination.
 
     If you need to use a tool to automate merge/conflict decisions, you
     can specify one with ``--tool``, see :hg:`help merge-tools`.
     As a caveat: the tool will not be used to mediate when a file was
     deleted, there is no hook presently available for this.
 
     If a rebase is interrupted to manually resolve a conflict, it can be
     continued with --continue/-c or aborted with --abort/-a.
 
     .. container:: verbose
 
       Examples:
 
       - move "local changes" (current commit back to branching point)
         to the current branch tip after a pull::
 
           hg rebase
 
       - move a single changeset to the stable branch::
 
           hg rebase -r 5f493448 -d stable
 
       - splice a commit and all its descendants onto another part of history::
 
           hg rebase --source c0c3 --dest 4cf9
 
       - rebase everything on a branch marked by a bookmark onto the
         default branch::
 
           hg rebase --base myfeature --dest default
 
       - collapse a sequence of changes into a single commit::
 
           hg rebase --collapse -r 1520:1525 -d .
 
       - move a named branch while preserving its name::
 
           hg rebase -r "branch(featureX)" -d 1.3 --keepbranches
 
     Returns 0 on success, 1 if nothing to rebase or there are
     unresolved conflicts.
 
     """
     originalwd = target = None
     activebookmark = None
     external = nullrev
     # Mapping between the old revision id and either what is the new rebased
     # revision or what needs to be done with the old revision. The state dict
     # will be what contains most of the rebase progress state.
     state = {}
     skipped = set()
     targetancestors = set()
 
 
     lock = wlock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
 
         # Validate input and define rebasing points
         destf = opts.get('dest', None)
         srcf = opts.get('source', None)
         basef = opts.get('base', None)
         revf = opts.get('rev', [])
         contf = opts.get('continue')
         abortf = opts.get('abort')
         collapsef = opts.get('collapse', False)
         collapsemsg = cmdutil.logmessage(ui, opts)
         date = opts.get('date', None)
         e = opts.get('extrafn') # internal, used by e.g. hgsubversion
         extrafns = [_savegraft]
         if e:
             extrafns = [e]
         keepf = opts.get('keep', False)
         keepbranchesf = opts.get('keepbranches', False)
         # keepopen is not meant for use on the command line, but by
         # other extensions
         keepopen = opts.get('keepopen', False)
 
         if opts.get('interactive'):
             try:
                 if extensions.find('histedit'):
                     enablehistedit = ''
             except KeyError:
                 enablehistedit = " --config extensions.histedit="
             help = "hg%s help -e histedit" % enablehistedit
             msg = _("interactive history editing is supported by the "
                     "'histedit' extension (see \"%s\")") % help
             raise error.Abort(msg)
 
         if collapsemsg and not collapsef:
             raise error.Abort(
                 _('message can only be specified with collapse'))
 
         if contf or abortf:
             if contf and abortf:
                 raise error.Abort(_('cannot use both abort and continue'))
             if collapsef:
                 raise error.Abort(
                     _('cannot use collapse with continue or abort'))
             if srcf or basef or destf:
                 raise error.Abort(
                     _('abort and continue do not allow specifying revisions'))
             if abortf and opts.get('tool', False):
                 ui.warn(_('tool option will be ignored\n'))
 
             try:
                 (originalwd, target, state, skipped, collapsef, keepf,
                  keepbranchesf, external, activebookmark) = restorestatus(repo)
             except error.RepoLookupError:
                 if abortf:
                     clearstatus(repo)
                     repo.ui.warn(_('rebase aborted (no revision is removed,'
                                    ' only broken state is cleared)\n'))
                     return 0
                 else:
                     msg = _('cannot continue inconsistent rebase')
                     hint = _('use "hg rebase --abort" to clear broken state')
                     raise error.Abort(msg, hint=hint)
             if abortf:
                 return abort(repo, originalwd, target, state,
                              activebookmark=activebookmark)
         else:
             if srcf and basef:
                 raise error.Abort(_('cannot specify both a '
                                    'source and a base'))
             if revf and basef:
                 raise error.Abort(_('cannot specify both a '
                                    'revision and a base'))
             if revf and srcf:
                 raise error.Abort(_('cannot specify both a '
                                    'revision and a source'))
 
             cmdutil.checkunfinished(repo)
             cmdutil.bailifchanged(repo)
 
             if destf:
                 dest = scmutil.revsingle(repo, destf)
             else:
                 dest = repo[_destrebase(repo)]
                 destf = str(dest)
 
             if revf:
                 rebaseset = scmutil.revrange(repo, revf)
                 if not rebaseset:
                     ui.status(_('empty "rev" revision set - '
                                 'nothing to rebase\n'))
                     return _nothingtorebase()
             elif srcf:
                 src = scmutil.revrange(repo, [srcf])
                 if not src:
                     ui.status(_('empty "source" revision set - '
                                 'nothing to rebase\n'))
                     return _nothingtorebase()
                 rebaseset = repo.revs('(%ld)::', src)
                 assert rebaseset
             else:
                 base = scmutil.revrange(repo, [basef or '.'])
                 if not base:
                     ui.status(_('empty "base" revision set - '
                                 "can't compute rebase set\n"))
                     return _nothingtorebase()
                 commonanc = repo.revs('ancestor(%ld, %d)', base, dest).first()
                 if commonanc is not None:
                     rebaseset = repo.revs('(%d::(%ld) - %d)::',
                                           commonanc, base, commonanc)
                 else:
                     rebaseset = []
 
                 if not rebaseset:
                     # transform to list because smartsets are not comparable to
                     # lists. This should be improved to honor laziness of
                     # smartset.
                     if list(base) == [dest.rev()]:
                         if basef:
                             ui.status(_('nothing to rebase - %s is both "base"'
                                         ' and destination\n') % dest)
                         else:
                             ui.status(_('nothing to rebase - working directory '
                                         'parent is also destination\n'))
                     elif not repo.revs('%ld - ::%d', base, dest):
                         if basef:
                             ui.status(_('nothing to rebase - "base" %s is '
                                         'already an ancestor of destination '
                                         '%s\n') %
                                       ('+'.join(str(repo[r]) for r in base),
                                        dest))
                         else:
                             ui.status(_('nothing to rebase - working '
                                         'directory parent is already an '
                                         'ancestor of destination %s\n') % dest)
                     else: # can it happen?
                         ui.status(_('nothing to rebase from %s to %s\n') %
                                   ('+'.join(str(repo[r]) for r in base), dest))
                     return _nothingtorebase()
 
             allowunstable = obsolete.isenabled(repo, obsolete.allowunstableopt)
             if (not (keepf or allowunstable)
                   and repo.revs('first(children(%ld) - %ld)',
                                 rebaseset, rebaseset)):
                 raise error.Abort(
                     _("can't remove original changesets with"
                       " unrebased descendants"),
                     hint=_('use --keep to keep original changesets'))
 
             obsoletenotrebased = {}
             if ui.configbool('experimental', 'rebaseskipobsolete'):
                 rebasesetrevs = set(rebaseset)
                 rebaseobsrevs = _filterobsoleterevs(repo, rebasesetrevs)
                 obsoletenotrebased = _computeobsoletenotrebased(repo,
                                                                 rebaseobsrevs,
                                                                 dest)
                 rebaseobsskipped = set(obsoletenotrebased)
 
                 # Obsolete node with successors not in dest leads to divergence
                 divergenceok = ui.configbool('rebase',
                                              'allowdivergence')
                 divergencebasecandidates = rebaseobsrevs - rebaseobsskipped
 
                 if divergencebasecandidates and not divergenceok:
                     msg = _("this rebase will cause divergence")
                     h = _("to force the rebase please set "
                           "rebase.allowdivergence=True")
                     raise error.Abort(msg, hint=h)
 
                 # - plain prune (no successor) changesets are rebased
                 # - split changesets are not rebased if at least one of the
                 # changeset resulting from the split is an ancestor of dest
                 rebaseset = rebasesetrevs - rebaseobsskipped
                 if rebasesetrevs and not rebaseset:
                     msg = _('all requested changesets have equivalents '
                             'or were marked as obsolete')
                     hint = _('to force the rebase, set the config '
                              'experimental.rebaseskipobsolete to False')
                     raise error.Abort(msg, hint=hint)
 
             result = buildstate(repo, dest, rebaseset, collapsef,
                                 obsoletenotrebased)
 
             if not result:
                 # Empty state built, nothing to rebase
                 ui.status(_('nothing to rebase\n'))
                 return _nothingtorebase()
 
             root = min(rebaseset)
             if not keepf and not repo[root].mutable():
                 raise error.Abort(_("can't rebase public changeset %s")
                                  % repo[root],
                                  hint=_('see "hg help phases" for details'))
 
             originalwd, target, state = result
             if collapsef:
                 targetancestors = repo.changelog.ancestors([target],
                                                            inclusive=True)
                 external = externalparent(repo, state, targetancestors)
 
             if dest.closesbranch() and not keepbranchesf:
                 ui.status(_('reopening closed branch head %s\n') % dest)
 
         if keepbranchesf:
             # insert _savebranch at the start of extrafns so if
             # there's a user-provided extrafn it can clobber branch if
             # desired
             extrafns.insert(0, _savebranch)
             if collapsef:
                 branches = set()
                 for rev in state:
                     branches.add(repo[rev].branch())
                     if len(branches) > 1:
                         raise error.Abort(_('cannot collapse multiple named '
                             'branches'))
 
         # Rebase
         if not targetancestors:
             targetancestors = repo.changelog.ancestors([target], inclusive=True)
 
         # Keep track of the current bookmarks in order to reset them later
         currentbookmarks = repo._bookmarks.copy()
         activebookmark = activebookmark or repo._activebookmark
         if activebookmark:
             bookmarks.deactivate(repo)
 
         extrafn = _makeextrafn(extrafns)
 
         sortedstate = sorted(state)
         total = len(sortedstate)
         pos = 0
         for rev in sortedstate:
             ctx = repo[rev]
             desc = '%d:%s "%s"' % (ctx.rev(), ctx,
                                    ctx.description().split('\n', 1)[0])
             names = repo.nodetags(ctx.node()) + repo.nodebookmarks(ctx.node())
             if names:
                 desc += ' (%s)' % ' '.join(names)
             pos += 1
             if state[rev] == revtodo:
                 ui.status(_('rebasing %s\n') % desc)
                 ui.progress(_("rebasing"), pos, ("%d:%s" % (rev, ctx)),
                             _('changesets'), total)
                 p1, p2, base = defineparents(repo, rev, target, state,
                                              targetancestors)
                 storestatus(repo, originalwd, target, state, collapsef, keepf,
                             keepbranchesf, external, activebookmark)
                 if len(repo[None].parents()) == 2:
                     repo.ui.debug('resuming interrupted rebase\n')
                 else:
                     try:
                         ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                                      'rebase')
                         stats = rebasenode(repo, rev, p1, base, state,
                                            collapsef, target)
                         if stats and stats[3] > 0:
                             raise error.InterventionRequired(
                                 _('unresolved conflicts (see hg '
                                   'resolve, then hg rebase --continue)'))
                     finally:
                         ui.setconfig('ui', 'forcemerge', '', 'rebase')
                 if not collapsef:
                     merging = p2 != nullrev
                     editform = cmdutil.mergeeditform(merging, 'rebase')
                     editor = cmdutil.getcommiteditor(editform=editform, **opts)
                     newnode = concludenode(repo, rev, p1, p2, extrafn=extrafn,
                                            editor=editor,
                                            keepbranches=keepbranchesf,
                                            date=date)
                 else:
                     # Skip commit if we are collapsing
                     repo.dirstate.beginparentchange()
                     repo.setparents(repo[p1].node())
                     repo.dirstate.endparentchange()
                     newnode = None
                 # Update the state
                 if newnode is not None:
                     state[rev] = repo[newnode].rev()
                     ui.debug('rebased as %s\n' % short(newnode))
                 else:
                     if not collapsef:
                         ui.warn(_('note: rebase of %d:%s created no changes '
                                   'to commit\n') % (rev, ctx))
                         skipped.add(rev)
                     state[rev] = p1
                     ui.debug('next revision set to %s\n' % p1)
             elif state[rev] == nullmerge:
                 ui.debug('ignoring null merge rebase of %s\n' % rev)
             elif state[rev] == revignored:
                 ui.status(_('not rebasing ignored %s\n') % desc)
             elif state[rev] == revprecursor:
                 targetctx = repo[obsoletenotrebased[rev]]
                 desctarget = '%d:%s "%s"' % (targetctx.rev(), targetctx,
                              targetctx.description().split('\n', 1)[0])
                 msg = _('note: not rebasing %s, already in destination as %s\n')
                 ui.status(msg % (desc, desctarget))
             elif state[rev] == revpruned:
                 msg = _('note: not rebasing %s, it has no successor\n')
                 ui.status(msg % desc)
             else:
                 ui.status(_('already rebased %s as %s\n') %
                           (desc, repo[state[rev]]))
 
         ui.progress(_('rebasing'), None)
         ui.note(_('rebase merging completed\n'))
 
         if collapsef and not keepopen:
             p1, p2, _base = defineparents(repo, min(state), target,
                                           state, targetancestors)
             editopt = opts.get('edit')
             editform = 'rebase.collapse'
             if collapsemsg:
                 commitmsg = collapsemsg
             else:
                 commitmsg = 'Collapsed revision'
                 for rebased in state:
                     if rebased not in skipped and state[rebased] > nullmerge:
                         commitmsg += '\n* %s' % repo[rebased].description()
                 editopt = True
             editor = cmdutil.getcommiteditor(edit=editopt, editform=editform)
             newnode = concludenode(repo, rev, p1, external, commitmsg=commitmsg,
                                    extrafn=extrafn, editor=editor,
                                    keepbranches=keepbranchesf,
                                    date=date)
             if newnode is None:
                 newrev = target
             else:
                 newrev = repo[newnode].rev()
             for oldrev in state.iterkeys():
                 if state[oldrev] > nullmerge:
                     state[oldrev] = newrev
 
         if 'qtip' in repo.tags():
             updatemq(repo, state, skipped, **opts)
 
         if currentbookmarks:
             # Nodeids are needed to reset bookmarks
             nstate = {}
             for k, v in state.iteritems():
                 if v > nullmerge:
                     nstate[repo[k].node()] = repo[v].node()
             # XXX this is the same as dest.node() for the non-continue path --
             # this should probably be cleaned up
             targetnode = repo[target].node()
 
         # restore original working directory
         # (we do this before stripping)
         newwd = state.get(originalwd, originalwd)
         if newwd < 0:
             # original directory is a parent of rebase set root or ignored
             newwd = originalwd
         if newwd not in [c.rev() for c in repo[None].parents()]:
             ui.note(_("update back to initial working directory parent\n"))
             hg.updaterepo(repo, newwd, False)
 
         if not keepf:
             collapsedas = None
             if collapsef:
                 collapsedas = newnode
             clearrebased(ui, repo, state, skipped, collapsedas)
 
         with repo.transaction('bookmark') as tr:
             if currentbookmarks:
                 updatebookmarks(repo, targetnode, nstate, currentbookmarks, tr)
                 if activebookmark not in repo._bookmarks:
                     # active bookmark was divergent one and has been deleted
                     activebookmark = None
         clearstatus(repo)
 
         ui.note(_("rebase completed\n"))
         util.unlinkpath(repo.sjoin('undo'), ignoremissing=True)
         if skipped:
             ui.note(_("%d revisions have been skipped\n") % len(skipped))
 
         if (activebookmark and
             repo['.'].node() == repo._bookmarks[activebookmark]):
                 bookmarks.activate(repo, activebookmark)
 
     finally:
         release(lock, wlock)
 
 def externalparent(repo, state, targetancestors):
     """Return the revision that should be used as the second parent
     when the revisions in state is collapsed on top of targetancestors.
     Abort if there is more than one parent.
     """
     parents = set()
     source = min(state)
     for rev in state:
         if rev == source:
             continue
         for p in repo[rev].parents():
             if (p.rev() not in state
                         and p.rev() not in targetancestors):
                 parents.add(p.rev())
     if not parents:
         return nullrev
     if len(parents) == 1:
         return parents.pop()
     raise error.Abort(_('unable to collapse on top of %s, there is more '
                        'than one external parent: %s') %
                      (max(targetancestors),
                       ', '.join(str(p) for p in sorted(parents))))
 
 def concludenode(repo, rev, p1, p2, commitmsg=None, editor=None, extrafn=None,
                  keepbranches=False, date=None):
     '''Commit the wd changes with parents p1 and p2. Reuse commit info from rev
     but also store useful information in extra.
     Return node of committed revision.'''
     dsguard = cmdutil.dirstateguard(repo, 'rebase')
     try:
         repo.setparents(repo[p1].node(), repo[p2].node())
         ctx = repo[rev]
         if commitmsg is None:
             commitmsg = ctx.description()
         keepbranch = keepbranches and repo[p1].branch() != ctx.branch()
         extra = {'rebase_source': ctx.hex()}
         if extrafn:
             extrafn(ctx, extra)
 
         backup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             targetphase = max(ctx.phase(), phases.draft)
             repo.ui.setconfig('phases', 'new-commit', targetphase, 'rebase')
             if keepbranch:
                 repo.ui.setconfig('ui', 'allowemptycommit', True)
             # Commit might fail if unresolved files exist
             if date is None:
                 date = ctx.date()
             newnode = repo.commit(text=commitmsg, user=ctx.user(),
                                   date=date, extra=extra, editor=editor)
         finally:
             repo.ui.restoreconfig(backup)
 
         repo.dirstate.setbranch(repo[newnode].branch())
         dsguard.close()
         return newnode
     finally:
         release(dsguard)
 
 def rebasenode(repo, rev, p1, base, state, collapse, target):
     'Rebase a single revision rev on top of p1 using base as merge ancestor'
     # Merge phase
     # Update to target and merge it with local
     if repo['.'].rev() != p1:
         repo.ui.debug(" update to %d:%s\n" % (p1, repo[p1]))
         merge.update(repo, p1, False, True)
     else:
         repo.ui.debug(" already in target\n")
     repo.dirstate.write(repo.currenttransaction())
     repo.ui.debug(" merge against %d:%s\n" % (rev, repo[rev]))
     if base is not None:
         repo.ui.debug("   detach base %d:%s\n" % (base, repo[base]))
     # When collapsing in-place, the parent is the common ancestor, we
     # have to allow merging with it.
     stats = merge.update(repo, rev, True, True, base, collapse,
                         labels=['dest', 'source'])
     if collapse:
         copies.duplicatecopies(repo, rev, target)
     else:
         # If we're not using --collapse, we need to
         # duplicate copies between the revision we're
         # rebasing and its first parent, but *not*
         # duplicate any copies that have already been
         # performed in the destination.
         p1rev = repo[rev].p1().rev()
         copies.duplicatecopies(repo, rev, p1rev, skiprev=target)
     return stats
 
 def nearestrebased(repo, rev, state):
     """return the nearest ancestors of rev in the rebase result"""
     rebased = [r for r in state if state[r] > nullmerge]
     candidates = repo.revs('max(%ld  and (::%d))', rebased, rev)
     if candidates:
         return state[candidates.first()]
     else:
         return None
 
 def defineparents(repo, rev, target, state, targetancestors):
     'Return the new parent relationship of the revision that will be rebased'
     parents = repo[rev].parents()
     p1 = p2 = nullrev
 
     p1n = parents[0].rev()
     if p1n in targetancestors:
         p1 = target
     elif p1n in state:
         if state[p1n] == nullmerge:
             p1 = target
         elif state[p1n] in revskipped:
             p1 = nearestrebased(repo, p1n, state)
             if p1 is None:
                 p1 = target
         else:
             p1 = state[p1n]
     else: # p1n external
         p1 = target
         p2 = p1n
 
     if len(parents) == 2 and parents[1].rev() not in targetancestors:
         p2n = parents[1].rev()
         # interesting second parent
         if p2n in state:
             if p1 == target: # p1n in targetancestors or external
                 p1 = state[p2n]
             elif state[p2n] in revskipped:
                 p2 = nearestrebased(repo, p2n, state)
                 if p2 is None:
                     # no ancestors rebased yet, detach
                     p2 = target
             else:
                 p2 = state[p2n]
         else: # p2n external
             if p2 != nullrev: # p1n external too => rev is a merged revision
                 raise error.Abort(_('cannot use revision %d as base, result '
                         'would have 3 parents') % rev)
             p2 = p2n
     repo.ui.debug(" future parents are %d and %d\n" %
                             (repo[p1].rev(), repo[p2].rev()))
 
     if not any(p.rev() in state for p in parents):
         # Case (1) root changeset of a non-detaching rebase set.
         # Let the merge mechanism find the base itself.
         base = None
     elif not repo[rev].p2():
         # Case (2) detaching the node with a single parent, use this parent
         base = repo[rev].p1().rev()
     else:
         # Assuming there is a p1, this is the case where there also is a p2.
         # We are thus rebasing a merge and need to pick the right merge base.
         #
         # Imagine we have:
         # - M: current rebase revision in this step
         # - A: one parent of M
         # - B: other parent of M
         # - D: destination of this merge step (p1 var)
         #
         # Consider the case where D is a descendant of A or B and the other is
         # 'outside'. In this case, the right merge base is the D ancestor.
         #
         # An informal proof, assuming A is 'outside' and B is the D ancestor:
         #
         # If we pick B as the base, the merge involves:
         # - changes from B to M (actual changeset payload)
         # - changes from B to D (induced by rebase) as D is a rebased
         #   version of B)
         # Which exactly represent the rebase operation.
         #
         # If we pick A as the base, the merge involves:
         # - changes from A to M (actual changeset payload)
         # - changes from A to D (with include changes between unrelated A and B
         #   plus changes induced by rebase)
         # Which does not represent anything sensible and creates a lot of
         # conflicts. A is thus not the right choice - B is.
         #
         # Note: The base found in this 'proof' is only correct in the specified
         # case. This base does not make sense if is not D a descendant of A or B
         # or if the other is not parent 'outside' (especially not if the other
         # parent has been rebased). The current implementation does not
         # make it feasible to consider different cases separately. In these
         # other cases we currently just leave it to the user to correctly
         # resolve an impossible merge using a wrong ancestor.
         for p in repo[rev].parents():
             if state.get(p.rev()) == p1:
                 base = p.rev()
                 break
         else: # fallback when base not found
             base = None
 
             # Raise because this function is called wrong (see issue 4106)
             raise AssertionError('no base found to rebase on '
                                  '(defineparents called wrong)')
     return p1, p2, base
 
 def isagitpatch(repo, patchname):
     'Return true if the given patch is in git format'
     mqpatch = os.path.join(repo.mq.path, patchname)
     for line in patch.linereader(file(mqpatch, 'rb')):
         if line.startswith('diff --git'):
             return True
     return False
 
 def updatemq(repo, state, skipped, **opts):
     'Update rebased mq patches - finalize and then import them'
     mqrebase = {}
     mq = repo.mq
     original_series = mq.fullseries[:]
     skippedpatches = set()
 
     for p in mq.applied:
         rev = repo[p.node].rev()
         if rev in state:
             repo.ui.debug('revision %d is an mq patch (%s), finalize it.\n' %
                                         (rev, p.name))
             mqrebase[rev] = (p.name, isagitpatch(repo, p.name))
         else:
             # Applied but not rebased, not sure this should happen
             skippedpatches.add(p.name)
 
     if mqrebase:
         mq.finish(repo, mqrebase.keys())
 
         # We must start import from the newest revision
         for rev in sorted(mqrebase, reverse=True):
             if rev not in skipped:
                 name, isgit = mqrebase[rev]
                 repo.ui.note(_('updating mq patch %s to %s:%s\n') %
                              (name, state[rev], repo[state[rev]]))
                 mq.qimport(repo, (), patchname=name, git=isgit,
                                 rev=[str(state[rev])])
             else:
                 # Rebased and skipped
                 skippedpatches.add(mqrebase[rev][0])
 
         # Patches were either applied and rebased and imported in
         # order, applied and removed or unapplied. Discard the removed
         # ones while preserving the original series order and guards.
         newseries = [s for s in original_series
                      if mq.guard_re.split(s, 1)[0] not in skippedpatches]
         mq.fullseries[:] = newseries
         mq.seriesdirty = True
         mq.savedirty()
 
 def updatebookmarks(repo, targetnode, nstate, originalbookmarks, tr):
     'Move bookmarks to their correct changesets, and delete divergent ones'
     marks = repo._bookmarks
     for k, v in originalbookmarks.iteritems():
         if v in nstate:
             # update the bookmarks for revs that have moved
             marks[k] = nstate[v]
             bookmarks.deletedivergent(repo, [targetnode], k)
     marks.recordchange(tr)
 
 def storestatus(repo, originalwd, target, state, collapse, keep, keepbranches,
                 external, activebookmark):
     'Store the current status to allow recovery'
     f = repo.vfs("rebasestate", "w")
     f.write(repo[originalwd].hex() + '\n')
     f.write(repo[target].hex() + '\n')
     f.write(repo[external].hex() + '\n')
     f.write('%d\n' % int(collapse))
     f.write('%d\n' % int(keep))
     f.write('%d\n' % int(keepbranches))
     f.write('%s\n' % (activebookmark or ''))
     for d, v in state.iteritems():
         oldrev = repo[d].hex()
         if v >= 0:
             newrev = repo[v].hex()
         elif v == revtodo:
             # To maintain format compatibility, we have to use nullid.
             # Please do remove this special case when upgrading the format.
             newrev = hex(nullid)
         else:
             newrev = v
         f.write("%s:%s\n" % (oldrev, newrev))
     f.close()
     repo.ui.debug('rebase status stored\n')
 
 def clearstatus(repo):
     'Remove the status files'
     _clearrebasesetvisibiliy(repo)
     util.unlinkpath(repo.join("rebasestate"), ignoremissing=True)
 
 def restorestatus(repo):
     'Restore a previously stored status'
     keepbranches = None
     target = None
     collapse = False
     external = nullrev
     activebookmark = None
     state = {}
 
     try:
         f = repo.vfs("rebasestate")
         for i, l in enumerate(f.read().splitlines()):
             if i == 0:
                 originalwd = repo[l].rev()
             elif i == 1:
                 target = repo[l].rev()
             elif i == 2:
                 external = repo[l].rev()
             elif i == 3:
                 collapse = bool(int(l))
             elif i == 4:
                 keep = bool(int(l))
             elif i == 5:
                 keepbranches = bool(int(l))
             elif i == 6 and not (len(l) == 81 and ':' in l):
                 # line 6 is a recent addition, so for backwards compatibility
                 # check that the line doesn't look like the oldrev:newrev lines
                 activebookmark = l
             else:
                 oldrev, newrev = l.split(':')
                 if newrev in (str(nullmerge), str(revignored),
                               str(revprecursor), str(revpruned)):
                     state[repo[oldrev].rev()] = int(newrev)
                 elif newrev == nullid:
                     state[repo[oldrev].rev()] = revtodo
                     # Legacy compat special case
                 else:
                     state[repo[oldrev].rev()] = repo[newrev].rev()
 
     except IOError as err:
         if err.errno != errno.ENOENT:
             raise
         raise error.Abort(_('no rebase in progress'))
 
     if keepbranches is None:
         raise error.Abort(_('.hg/rebasestate is incomplete'))
 
     skipped = set()
     # recompute the set of skipped revs
     if not collapse:
         seen = set([target])
         for old, new in sorted(state.items()):
             if new != revtodo and new in seen:
                 skipped.add(old)
             seen.add(new)
     repo.ui.debug('computed skipped revs: %s\n' %
                     (' '.join(str(r) for r in sorted(skipped)) or None))
     repo.ui.debug('rebase status resumed\n')
     _setrebasesetvisibility(repo, state.keys())
     return (originalwd, target, state, skipped,
             collapse, keep, keepbranches, external, activebookmark)
 
 def needupdate(repo, state):
     '''check whether we should `update --clean` away from a merge, or if
     somehow the working dir got forcibly updated, e.g. by older hg'''
     parents = [p.rev() for p in repo[None].parents()]
 
     # Are we in a merge state at all?
     if len(parents) < 2:
         return False
 
     # We should be standing on the first as-of-yet unrebased commit.
     firstunrebased = min([old for old, new in state.iteritems()
                           if new == nullrev])
     if firstunrebased in parents:
         return True
 
     return False
 
 def abort(repo, originalwd, target, state, activebookmark=None):
     '''Restore the repository to its original state.  Additional args:
 
     activebookmark: the name of the bookmark that should be active after the
         restore'''
 
     try:
         # If the first commits in the rebased set get skipped during the rebase,
         # their values within the state mapping will be the target rev id. The
         # dstates list must must not contain the target rev (issue4896)
         dstates = [s for s in state.values() if s >= 0 and s != target]
         immutable = [d for d in dstates if not repo[d].mutable()]
         cleanup = True
         if immutable:
             repo.ui.warn(_("warning: can't clean up public changesets %s\n")
                         % ', '.join(str(repo[r]) for r in immutable),
                         hint=_('see "hg help phases" for details'))
             cleanup = False
 
         descendants = set()
         if dstates:
             descendants = set(repo.changelog.descendants(dstates))
         if descendants - set(dstates):
             repo.ui.warn(_("warning: new changesets detected on target branch, "
                         "can't strip\n"))
             cleanup = False
 
         if cleanup:
             shouldupdate = False
             rebased = filter(lambda x: x >= 0 and x != target, state.values())
             if rebased:
                 strippoints = [
                         c.node() for c in repo.set('roots(%ld)', rebased)]
                 shouldupdate = len([
                         c.node() for c in repo.set('. & (%ld)', rebased)]) > 0
 
             # Update away from the rebase if necessary
             if shouldupdate or needupdate(repo, state):
                 merge.update(repo, originalwd, False, True)
 
             # Strip from the first rebased revision
             if rebased:
                 # no backup of rebased cset versions needed
                 repair.strip(repo.ui, repo, strippoints)
 
         if activebookmark and activebookmark in repo._bookmarks:
             bookmarks.activate(repo, activebookmark)
 
     finally:
         clearstatus(repo)
         repo.ui.warn(_('rebase aborted\n'))
     return 0
 
 def buildstate(repo, dest, rebaseset, collapse, obsoletenotrebased):
     '''Define which revisions are going to be rebased and where
 
     repo: repo
     dest: context
     rebaseset: set of rev
     '''
     _setrebasesetvisibility(repo, rebaseset)
 
     # This check isn't strictly necessary, since mq detects commits over an
     # applied patch. But it prevents messing up the working directory when
     # a partially completed rebase is blocked by mq.
     if 'qtip' in repo.tags() and (dest.node() in
                             [s.node for s in repo.mq.applied]):
         raise error.Abort(_('cannot rebase onto an applied mq patch'))
 
     roots = list(repo.set('roots(%ld)', rebaseset))
     if not roots:
         raise error.Abort(_('no matching revisions'))
     roots.sort()
     state = {}
     detachset = set()
     for root in roots:
         commonbase = root.ancestor(dest)
         if commonbase == root:
             raise error.Abort(_('source is ancestor of destination'))
         if commonbase == dest:
             samebranch = root.branch() == dest.branch()
             if not collapse and samebranch and root in dest.children():
                 repo.ui.debug('source is a child of destination\n')
                 return None
 
         repo.ui.debug('rebase onto %d starting from %s\n' % (dest, root))
         state.update(dict.fromkeys(rebaseset, revtodo))
         # Rebase tries to turn <dest> into a parent of <root> while
         # preserving the number of parents of rebased changesets:
         #
         # - A changeset with a single parent will always be rebased as a
         #   changeset with a single parent.
         #
         # - A merge will be rebased as merge unless its parents are both
         #   ancestors of <dest> or are themselves in the rebased set and
         #   pruned while rebased.
         #
         # If one parent of <root> is an ancestor of <dest>, the rebased
         # version of this parent will be <dest>. This is always true with
         # --base option.
         #
         # Otherwise, we need to *replace* the original parents with
         # <dest>. This "detaches" the rebased set from its former location
         # and rebases it onto <dest>. Changes introduced by ancestors of
         # <root> not common with <dest> (the detachset, marked as
         # nullmerge) are "removed" from the rebased changesets.
         #
         # - If <root> has a single parent, set it to <dest>.
         #
         # - If <root> is a merge, we cannot decide which parent to
         #   replace, the rebase operation is not clearly defined.
         #
         # The table below sums up this behavior:
         #
         # +------------------+----------------------+-------------------------+
         # |                  |     one parent       |  merge                  |
         # +------------------+----------------------+-------------------------+
         # | parent in        | new parent is <dest> | parents in ::<dest> are |
         # | ::<dest>         |                      | remapped to <dest>      |
         # +------------------+----------------------+-------------------------+
         # | unrelated source | new parent is <dest> | ambiguous, abort        |
         # +------------------+----------------------+-------------------------+
         #
         # The actual abort is handled by `defineparents`
         if len(root.parents()) <= 1:
             # ancestors of <root> not ancestors of <dest>
             detachset.update(repo.changelog.findmissingrevs([commonbase.rev()],
                                                             [root.rev()]))
     for r in detachset:
         if r not in state:
             state[r] = nullmerge
     if len(roots) > 1:
         # If we have multiple roots, we may have "hole" in the rebase set.
         # Rebase roots that descend from those "hole" should not be detached as
         # other root are. We use the special `revignored` to inform rebase that
         # the revision should be ignored but that `defineparents` should search
         # a rebase destination that make sense regarding rebased topology.
         rebasedomain = set(repo.revs('%ld::%ld', rebaseset, rebaseset))
         for ignored in set(rebasedomain) - set(rebaseset):
             state[ignored] = revignored
     for r in obsoletenotrebased:
         if obsoletenotrebased[r] is None:
             state[r] = revpruned
         else:
             state[r] = revprecursor
     return repo['.'].rev(), dest.rev(), state
 
 def clearrebased(ui, repo, state, skipped, collapsedas=None):
     """dispose of rebased revision at the end of the rebase
 
     If `collapsedas` is not None, the rebase was a collapse whose result if the
     `collapsedas` node."""
     if obsolete.isenabled(repo, obsolete.createmarkersopt):
         markers = []
         for rev, newrev in sorted(state.items()):
             if newrev >= 0:
                 if rev in skipped:
                     succs = ()
                 elif collapsedas is not None:
                     succs = (repo[collapsedas],)
                 else:
                     succs = (repo[newrev],)
                 markers.append((repo[rev], succs))
         if markers:
             obsolete.createmarkers(repo, markers)
     else:
         rebased = [rev for rev in state if state[rev] > nullmerge]
         if rebased:
             stripped = []
             for root in repo.set('roots(%ld)', rebased):
                 if set(repo.changelog.descendants([root.rev()])) - set(state):
                     ui.warn(_("warning: new changesets detected "
                               "on source branch, not stripping\n"))
                 else:
                     stripped.append(root.node())
             if stripped:
                 # backup the old csets by default
                 repair.strip(ui, repo, stripped, "all")
 
 
 def pullrebase(orig, ui, repo, *args, **opts):
     'Call rebase after pull if the latter has been invoked with --rebase'
     ret = None
     if opts.get('rebase'):
         wlock = lock = None
         try:
             wlock = repo.wlock()
             lock = repo.lock()
             if opts.get('update'):
                 del opts['update']
                 ui.debug('--update and --rebase are not compatible, ignoring '
                          'the update flag\n')
 
-            movemarkfrom = repo['.'].node()
             revsprepull = len(repo)
             origpostincoming = commands.postincoming
             def _dummy(*args, **kwargs):
                 pass
             commands.postincoming = _dummy
             try:
                 ret = orig(ui, repo, *args, **opts)
             finally:
                 commands.postincoming = origpostincoming
             revspostpull = len(repo)
             if revspostpull > revsprepull:
                 # --rev option from pull conflict with rebase own --rev
                 # dropping it
                 if 'rev' in opts:
                     del opts['rev']
                 # positional argument from pull conflicts with rebase's own
                 # --source.
                 if 'source' in opts:
                     del opts['source']
                 if rebase(ui, repo, **opts) == _nothingtorebase():
-                    branch = repo[None].branch()
-                    dest = repo[branch].rev()
-                    if dest != repo['.'].rev():
-                        # there was nothing to rebase we force an update
-                        hg.update(repo, dest)
-                        if bookmarks.update(repo, [movemarkfrom],
-                                            repo['.'].node()):
-                            ui.status(_("updating bookmark %s\n")
-                                      % repo._activebookmark)
+                    rev, _a, _b = destutil.destupdate(repo)
+                    if rev != repo['.'].rev(): # we could update
+                        # not passing argument to get the bare update behavior
+                        # with warning and trumpets
+                        commands.update(ui, repo)
         finally:
             release(lock, wlock)
     else:
         if opts.get('tool'):
             raise error.Abort(_('--tool can only be used with --rebase'))
         ret = orig(ui, repo, *args, **opts)
 
     return ret
 
 def _setrebasesetvisibility(repo, revs):
     """store the currently rebased set on the repo object
 
     This is used by another function to prevent rebased revision to because
     hidden (see issue4505)"""
     repo = repo.unfiltered()
     revs = set(revs)
     repo._rebaseset = revs
     # invalidate cache if visibility changes
     hiddens = repo.filteredrevcache.get('visible', set())
     if revs & hiddens:
         repo.invalidatevolatilesets()
 
 def _clearrebasesetvisibiliy(repo):
     """remove rebaseset data from the repo"""
     repo = repo.unfiltered()
     if '_rebaseset' in vars(repo):
         del repo._rebaseset
 
 def _rebasedvisible(orig, repo):
     """ensure rebased revs stay visible (see issue4505)"""
     blockers = orig(repo)
     blockers.update(getattr(repo, '_rebaseset', ()))
     return blockers
 
 def _filterobsoleterevs(repo, revs):
     """returns a set of the obsolete revisions in revs"""
     return set(r for r in revs if repo[r].obsolete())
 
 def _computeobsoletenotrebased(repo, rebaseobsrevs, dest):
     """return a mapping obsolete => successor for all obsolete nodes to be
     rebased that have a successors in the destination
 
     obsolete => None entries in the mapping indicate nodes with no succesor"""
     obsoletenotrebased = {}
 
     # Build a mapping successor => obsolete nodes for the obsolete
     # nodes to be rebased
     allsuccessors = {}
     cl = repo.changelog
     for r in rebaseobsrevs:
         node = cl.node(r)
         for s in obsolete.allsuccessors(repo.obsstore, [node]):
             try:
                 allsuccessors[cl.rev(s)] = cl.rev(node)
             except LookupError:
                 pass
 
     if allsuccessors:
         # Look for successors of obsolete nodes to be rebased among
         # the ancestors of dest
         ancs = cl.ancestors([repo[dest].rev()],
                             stoprev=min(allsuccessors),
                             inclusive=True)
         for s in allsuccessors:
             if s in ancs:
                 obsoletenotrebased[allsuccessors[s]] = s
             elif (s == allsuccessors[s] and
                   allsuccessors.values().count(s) == 1):
                 # plain prune
                 obsoletenotrebased[s] = None
 
     return obsoletenotrebased
 
 def summaryhook(ui, repo):
     if not os.path.exists(repo.join('rebasestate')):
         return
     try:
         state = restorestatus(repo)[2]
     except error.RepoLookupError:
         # i18n: column positioning for "hg summary"
         msg = _('rebase: (use "hg rebase --abort" to clear broken state)\n')
         ui.write(msg)
         return
     numrebased = len([i for i in state.itervalues() if i >= 0])
     # i18n: column positioning for "hg summary"
     ui.write(_('rebase: %s, %s (rebase --continue)\n') %
              (ui.label(_('%d rebased'), 'rebase.rebased') % numrebased,
               ui.label(_('%d remaining'), 'rebase.remaining') %
               (len(state) - numrebased)))
 
 def uisetup(ui):
     #Replace pull with a decorator to provide --rebase option
     entry = extensions.wrapcommand(commands.table, 'pull', pullrebase)
     entry[1].append(('', 'rebase', None,
                      _("rebase working directory to branch head")))
     entry[1].append(('t', 'tool', '',
                      _("specify merge tool for rebase")))
     cmdutil.summaryhooks.add('rebase', summaryhook)
     cmdutil.unfinishedstates.append(
         ['rebasestate', False, False, _('rebase in progress'),
          _("use 'hg rebase --continue' or 'hg rebase --abort'")])
     cmdutil.afterresolvedstates.append(
         ['rebasestate', _('hg rebase --continue')])
     # ensure rebased rev are not hidden
     extensions.wrapfunction(repoview, '_getdynamicblockers', _rebasedvisible)
     revsetpredicate.setup()

tests/test-rebase-pull.t

@@ -1,268 +1,311 b''
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > rebase=
   > 
   > [alias]
   > tglog = log -G --template "{rev}: '{desc}' {branches}\n"
   > EOF
 
 
   $ hg init a
   $ cd a
 
   $ echo C1 > C1
   $ hg ci -Am C1
   adding C1
 
   $ echo C2 > C2
   $ hg ci -Am C2
   adding C2
 
   $ cd ..
 
   $ hg clone a b
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg clone a c
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ cd b
 
   $ echo L1 > L1
   $ hg ci -Am L1
   adding L1
 
 
   $ cd ../a
 
   $ echo R1 > R1
   $ hg ci -Am R1
   adding R1
 
 
   $ cd ../b
 
 Now b has one revision to be pulled from a:
 
   $ hg pull --rebase
   pulling from $TESTTMP/a (glob)
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   rebasing 2:ff8d69a621f9 "L1"
   saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)
 
   $ hg tglog
   @  3: 'L1'
   |
   o  2: 'R1'
   |
   o  1: 'C2'
   |
   o  0: 'C1'
   
 Re-run:
 
   $ hg pull --rebase
   pulling from $TESTTMP/a (glob)
   searching for changes
   no changes found
 
 
 Invoke pull --rebase and nothing to rebase:
 
   $ cd ../c
 
   $ hg book norebase
   $ hg pull --rebase
   pulling from $TESTTMP/a (glob)
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   nothing to rebase - working directory parent is already an ancestor of destination 77ae9631bcca
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   updating bookmark norebase
 
   $ hg tglog -l 1
   @  2: 'R1'
   |
 
 pull --rebase --update should ignore --update:
 
   $ hg pull --rebase --update
   pulling from $TESTTMP/a (glob)
   searching for changes
   no changes found
 
 pull --rebase doesn't update if nothing has been pulled:
 
   $ hg up -q 1
 
   $ hg pull --rebase
   pulling from $TESTTMP/a (glob)
   searching for changes
   no changes found
 
   $ hg tglog -l 1
   o  2: 'R1'
   |
 
   $ cd ..
 
 pull --rebase works when a specific revision is pulled (issue3619)
 
   $ cd a
   $ hg tglog
   @  2: 'R1'
   |
   o  1: 'C2'
   |
   o  0: 'C1'
   
   $ echo R2 > R2
   $ hg ci -Am R2
   adding R2
   $ echo R3 > R3
   $ hg ci -Am R3
   adding R3
   $ cd ../c
   $ hg tglog
   o  2: 'R1'
   |
   @  1: 'C2'
   |
   o  0: 'C1'
   
   $ echo L1 > L1
   $ hg ci -Am L1
   adding L1
   created new head
   $ hg pull --rev tip --rebase
   pulling from $TESTTMP/a (glob)
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files
   rebasing 3:ff8d69a621f9 "L1"
   saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)
   $ hg tglog
   @  5: 'L1'
   |
   o  4: 'R3'
   |
   o  3: 'R2'
   |
   o  2: 'R1'
   |
   o  1: 'C2'
   |
   o  0: 'C1'
   
 pull --rebase works with bundle2 turned on
 
   $ cd ../a
   $ echo R4 > R4
   $ hg ci -Am R4
   adding R4
   $ hg tglog
   @  5: 'R4'
   |
   o  4: 'R3'
   |
   o  3: 'R2'
   |
   o  2: 'R1'
   |
   o  1: 'C2'
   |
   o  0: 'C1'
   
   $ cd ../c
   $ hg pull --rebase
   pulling from $TESTTMP/a (glob)
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   rebasing 5:518d153c0ba3 "L1"
   saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-backup.hg (glob)
   $ hg tglog
   @  6: 'L1'
   |
   o  5: 'R4'
   |
   o  4: 'R3'
   |
   o  3: 'R2'
   |
   o  2: 'R1'
   |
   o  1: 'C2'
   |
   o  0: 'C1'
   
 
 pull --rebase only update if there is nothing to rebase
 
   $ cd ../a
   $ echo R5 > R5
   $ hg ci -Am R5
   adding R5
   $ hg tglog
   @  6: 'R5'
   |
   o  5: 'R4'
   |
   o  4: 'R3'
   |
   o  3: 'R2'
   |
   o  2: 'R1'
   |
   o  1: 'C2'
   |
   o  0: 'C1'
   
   $ cd ../c
   $ echo L2 > L2
   $ hg ci -Am L2
   adding L2
   $ hg up 'desc(L1)'
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg pull --rebase
   pulling from $TESTTMP/a (glob)
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   rebasing 6:0d0727eb7ce0 "L1"
   rebasing 7:c1f58876e3bf "L2"
   saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-backup.hg (glob)
   $ hg tglog
   o  8: 'L2'
   |
   @  7: 'L1'
   |
   o  6: 'R5'
   |
   o  5: 'R4'
   |
   o  4: 'R3'
   |
   o  3: 'R2'
   |
   o  2: 'R1'
   |
   o  1: 'C2'
   |
   o  0: 'C1'
   
+
+pull --rebase update (no rebase) use proper update:
+
+- warn about other head.
+
+  $ cd ../a
+  $ echo R6 > R6
+  $ hg ci -Am R6
+  adding R6
+  $ cd ../c
+  $ hg up 'desc(R5)'
+  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
+  $ hg pull --rebase
+  pulling from $TESTTMP/a (glob)
+  searching for changes
+  adding changesets
+  adding manifests
+  adding file changes
+  added 1 changesets with 1 changes to 1 files (+1 heads)
+  nothing to rebase - working directory parent is already an ancestor of destination 65bc164c1d9b
+  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  1 other heads for branch "default"
+  $ hg tglog
+  @  9: 'R6'
+  |
+  | o  8: 'L2'
+  | |
+  | o  7: 'L1'
+  |/
+  o  6: 'R5'
+  |
+  o  5: 'R4'
+  |
+  o  4: 'R3'
+  |
+  o  3: 'R2'
+  |
+  o  2: 'R1'
+  |
+  o  1: 'C2'
+  |
+  o  0: 'C1'
+