hook: provide hook type information to external hook

The python hooks have access to the hook type information. There is not reason
for external hook to not be aware of it too.

For the record my use case is to make sure a hook script is configured for the
right type.

mercurial/help/config.txt

@@ -1,2365 +1,2368
 The Mercurial system uses a set of configuration files to control
 aspects of its behavior.
 
 Troubleshooting
 ===============
 
 If you're having problems with your configuration,
 :hg:`config --debug` can help you understand what is introducing
 a setting into your environment.
 
 See :hg:`help config.syntax` and :hg:`help config.files`
 for information about how and where to override things.
 
 Structure
 =========
 
 The configuration files use a simple ini-file format. A configuration
 file consists of sections, led by a ``[section]`` header and followed
 by ``name = value`` entries::
 
   [ui]
   username = Firstname Lastname <[e-mail]>
   verbose = True
 
 The above entries will be referred to as ``ui.username`` and
 ``ui.verbose``, respectively. See :hg:`help config.syntax`.
 
 Files
 =====
 
 Mercurial reads configuration data from several files, if they exist.
 These files do not exist by default and you will have to create the
 appropriate configuration files yourself:
 
 Local configuration is put into the per-repository ``<repo>/.hg/hgrc`` file.
 
 Global configuration like the username setting is typically put into:
 
 .. container:: windows
 
   - ``%USERPROFILE%\mercurial.ini`` (on Windows)
 
 .. container:: unix.plan9
 
   - ``$HOME/.hgrc`` (on Unix, Plan9)
 
 The names of these files depend on the system on which Mercurial is
 installed. ``*.rc`` files from a single directory are read in
 alphabetical order, later ones overriding earlier ones. Where multiple
 paths are given below, settings from earlier paths override later
 ones.
 
 .. container:: verbose.unix
 
   On Unix, the following files are consulted:
 
   - ``<repo>/.hg/hgrc`` (per-repository)
   - ``$HOME/.hgrc`` (per-user)
   - ``${XDG_CONFIG_HOME:-$HOME/.config}/hg/hgrc`` (per-user)
   - ``<install-root>/etc/mercurial/hgrc`` (per-installation)
   - ``<install-root>/etc/mercurial/hgrc.d/*.rc`` (per-installation)
   - ``/etc/mercurial/hgrc`` (per-system)
   - ``/etc/mercurial/hgrc.d/*.rc`` (per-system)
   - ``<internal>/default.d/*.rc`` (defaults)
 
 .. container:: verbose.windows
 
   On Windows, the following files are consulted:
 
   - ``<repo>/.hg/hgrc`` (per-repository)
   - ``%USERPROFILE%\.hgrc`` (per-user)
   - ``%USERPROFILE%\Mercurial.ini`` (per-user)
   - ``%HOME%\.hgrc`` (per-user)
   - ``%HOME%\Mercurial.ini`` (per-user)
   - ``HKEY_LOCAL_MACHINE\SOFTWARE\Mercurial`` (per-installation)
   - ``<install-dir>\hgrc.d\*.rc`` (per-installation)
   - ``<install-dir>\Mercurial.ini`` (per-installation)
   - ``<internal>/default.d/*.rc`` (defaults)
 
   .. note::
 
    The registry key ``HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Mercurial``
    is used when running 32-bit Python on 64-bit Windows.
 
 .. container:: windows
 
   On Windows 9x, ``%HOME%`` is replaced by ``%APPDATA%``.
 
 .. container:: verbose.plan9
 
   On Plan9, the following files are consulted:
 
   - ``<repo>/.hg/hgrc`` (per-repository)
   - ``$home/lib/hgrc`` (per-user)
   - ``<install-root>/lib/mercurial/hgrc`` (per-installation)
   - ``<install-root>/lib/mercurial/hgrc.d/*.rc`` (per-installation)
   - ``/lib/mercurial/hgrc`` (per-system)
   - ``/lib/mercurial/hgrc.d/*.rc`` (per-system)
   - ``<internal>/default.d/*.rc`` (defaults)
 
 Per-repository configuration options only apply in a
 particular repository. This file is not version-controlled, and
 will not get transferred during a "clone" operation. Options in
 this file override options in all other configuration files.
 
 .. container:: unix.plan9
 
   On Plan 9 and Unix, most of this file will be ignored if it doesn't
   belong to a trusted user or to a trusted group. See
   :hg:`help config.trusted` for more details.
 
 Per-user configuration file(s) are for the user running Mercurial.  Options
 in these files apply to all Mercurial commands executed by this user in any
 directory. Options in these files override per-system and per-installation
 options.
 
 Per-installation configuration files are searched for in the
 directory where Mercurial is installed. ``<install-root>`` is the
 parent directory of the **hg** executable (or symlink) being run.
 
 .. container:: unix.plan9
 
   For example, if installed in ``/shared/tools/bin/hg``, Mercurial
   will look in ``/shared/tools/etc/mercurial/hgrc``. Options in these
   files apply to all Mercurial commands executed by any user in any
   directory.
 
 Per-installation configuration files are for the system on
 which Mercurial is running. Options in these files apply to all
 Mercurial commands executed by any user in any directory. Registry
 keys contain PATH-like strings, every part of which must reference
 a ``Mercurial.ini`` file or be a directory where ``*.rc`` files will
 be read.  Mercurial checks each of these locations in the specified
 order until one or more configuration files are detected.
 
 Per-system configuration files are for the system on which Mercurial
 is running. Options in these files apply to all Mercurial commands
 executed by any user in any directory. Options in these files
 override per-installation options.
 
 Mercurial comes with some default configuration. The default configuration
 files are installed with Mercurial and will be overwritten on upgrades. Default
 configuration files should never be edited by users or administrators but can
 be overridden in other configuration files. So far the directory only contains
 merge tool configuration but packagers can also put other default configuration
 there.
 
 Syntax
 ======
 
 A configuration file consists of sections, led by a ``[section]`` header
 and followed by ``name = value`` entries (sometimes called
 ``configuration keys``)::
 
     [spam]
     eggs=ham
     green=
        eggs
 
 Each line contains one entry. If the lines that follow are indented,
 they are treated as continuations of that entry. Leading whitespace is
 removed from values. Empty lines are skipped. Lines beginning with
 ``#`` or ``;`` are ignored and may be used to provide comments.
 
 Configuration keys can be set multiple times, in which case Mercurial
 will use the value that was configured last. As an example::
 
     [spam]
     eggs=large
     ham=serrano
     eggs=small
 
 This would set the configuration key named ``eggs`` to ``small``.
 
 It is also possible to define a section multiple times. A section can
 be redefined on the same and/or on different configuration files. For
 example::
 
     [foo]
     eggs=large
     ham=serrano
     eggs=small
 
     [bar]
     eggs=ham
     green=
        eggs
 
     [foo]
     ham=prosciutto
     eggs=medium
     bread=toasted
 
 This would set the ``eggs``, ``ham``, and ``bread`` configuration keys
 of the ``foo`` section to ``medium``, ``prosciutto``, and ``toasted``,
 respectively. As you can see there only thing that matters is the last
 value that was set for each of the configuration keys.
 
 If a configuration key is set multiple times in different
 configuration files the final value will depend on the order in which
 the different configuration files are read, with settings from earlier
 paths overriding later ones as described on the ``Files`` section
 above.
 
 A line of the form ``%include file`` will include ``file`` into the
 current configuration file. The inclusion is recursive, which means
 that included files can include other files. Filenames are relative to
 the configuration file in which the ``%include`` directive is found.
 Environment variables and ``~user`` constructs are expanded in
 ``file``. This lets you do something like::
 
   %include ~/.hgrc.d/$HOST.rc
 
 to include a different configuration file on each computer you use.
 
 A line with ``%unset name`` will remove ``name`` from the current
 section, if it has been set previously.
 
 The values are either free-form text strings, lists of text strings,
 or Boolean values. Boolean values can be set to true using any of "1",
 "yes", "true", or "on" and to false using "0", "no", "false", or "off"
 (all case insensitive).
 
 List values are separated by whitespace or comma, except when values are
 placed in double quotation marks::
 
   allow_read = "John Doe, PhD", brian, betty
 
 Quotation marks can be escaped by prefixing them with a backslash. Only
 quotation marks at the beginning of a word is counted as a quotation
 (e.g., ``foo"bar baz`` is the list of ``foo"bar`` and ``baz``).
 
 Sections
 ========
 
 This section describes the different sections that may appear in a
 Mercurial configuration file, the purpose of each section, its possible
 keys, and their possible values.
 
 ``alias``
 ---------
 
 Defines command aliases.
 
 Aliases allow you to define your own commands in terms of other
 commands (or aliases), optionally including arguments. Positional
 arguments in the form of ``$1``, ``$2``, etc. in the alias definition
 are expanded by Mercurial before execution. Positional arguments not
 already used by ``$N`` in the definition are put at the end of the
 command to be executed.
 
 Alias definitions consist of lines of the form::
 
     <alias> = <command> [<argument>]...
 
 For example, this definition::
 
     latest = log --limit 5
 
 creates a new command ``latest`` that shows only the five most recent
 changesets. You can define subsequent aliases using earlier ones::
 
     stable5 = latest -b stable
 
 .. note::
 
    It is possible to create aliases with the same names as
    existing commands, which will then override the original
    definitions. This is almost always a bad idea!
 
 An alias can start with an exclamation point (``!``) to make it a
 shell alias. A shell alias is executed with the shell and will let you
 run arbitrary commands. As an example, ::
 
    echo = !echo $@
 
 will let you do ``hg echo foo`` to have ``foo`` printed in your
 terminal. A better example might be::
 
    purge = !$HG status --no-status --unknown -0 re: | xargs -0 rm -f
 
 which will make ``hg purge`` delete all unknown files in the
 repository in the same manner as the purge extension.
 
 Positional arguments like ``$1``, ``$2``, etc. in the alias definition
 expand to the command arguments. Unmatched arguments are
 removed. ``$0`` expands to the alias name and ``$@`` expands to all
 arguments separated by a space. ``"$@"`` (with quotes) expands to all
 arguments quoted individually and separated by a space. These expansions
 happen before the command is passed to the shell.
 
 Shell aliases are executed in an environment where ``$HG`` expands to
 the path of the Mercurial that was used to execute the alias. This is
 useful when you want to call further Mercurial commands in a shell
 alias, as was done above for the purge alias. In addition,
 ``$HG_ARGS`` expands to the arguments given to Mercurial. In the ``hg
 echo foo`` call above, ``$HG_ARGS`` would expand to ``echo foo``.
 
 .. note::
 
    Some global configuration options such as ``-R`` are
    processed before shell aliases and will thus not be passed to
    aliases.
 
 
 ``annotate``
 ------------
 
 Settings used when displaying file annotations. All values are
 Booleans and default to False. See :hg:`help config.diff` for
 related options for the diff command.
 
 ``ignorews``
     Ignore white space when comparing lines.
 
 ``ignorewsamount``
     Ignore changes in the amount of white space.
 
 ``ignoreblanklines``
     Ignore changes whose lines are all blank.
 
 
 ``auth``
 --------
 
 Authentication credentials for HTTP authentication. This section
 allows you to store usernames and passwords for use when logging
 *into* HTTP servers. See :hg:`help config.web` if
 you want to configure *who* can login to your HTTP server.
 
 Each line has the following format::
 
     <name>.<argument> = <value>
 
 where ``<name>`` is used to group arguments into authentication
 entries. Example::
 
     foo.prefix = hg.intevation.de/mercurial
     foo.username = foo
     foo.password = bar
     foo.schemes = http https
 
     bar.prefix = secure.example.org
     bar.key = path/to/file.key
     bar.cert = path/to/file.cert
     bar.schemes = https
 
 Supported arguments:
 
 ``prefix``
     Either ``*`` or a URI prefix with or without the scheme part.
     The authentication entry with the longest matching prefix is used
     (where ``*`` matches everything and counts as a match of length
     1). If the prefix doesn't include a scheme, the match is performed
     against the URI with its scheme stripped as well, and the schemes
     argument, q.v., is then subsequently consulted.
 
 ``username``
     Optional. Username to authenticate with. If not given, and the
     remote site requires basic or digest authentication, the user will
     be prompted for it. Environment variables are expanded in the
     username letting you do ``foo.username = $USER``. If the URI
     includes a username, only ``[auth]`` entries with a matching
     username or without a username will be considered.
 
 ``password``
     Optional. Password to authenticate with. If not given, and the
     remote site requires basic or digest authentication, the user
     will be prompted for it.
 
 ``key``
     Optional. PEM encoded client certificate key file. Environment
     variables are expanded in the filename.
 
 ``cert``
     Optional. PEM encoded client certificate chain file. Environment
     variables are expanded in the filename.
 
 ``schemes``
     Optional. Space separated list of URI schemes to use this
     authentication entry with. Only used if the prefix doesn't include
     a scheme. Supported schemes are http and https. They will match
     static-http and static-https respectively, as well.
     (default: https)
 
 If no suitable authentication entry is found, the user is prompted
 for credentials as usual if required by the remote.
 
 ``color``
 ---------
 
 Configure the Mercurial color mode. For details about how to define your custom
 effect and style see :hg:`help color`.
 
 ``mode``
     String: control the method used to output color. One of ``auto``, ``ansi``,
     ``win32``, ``terminfo`` or ``debug``. In auto mode the color extension will
     use ANSI mode by default (or win32 mode on Windows) if it detects a
     terminal. Any invalid value will disable color.
 
 ``pagermode``
     String: optinal override of ``color.mode`` used with pager (from the pager
     extensions).
 
     On some systems, terminfo mode may cause problems when using
     color with the pager extension and less -R. less with the -R option
     will only display ECMA-48 color codes, and terminfo mode may sometimes
     emit codes that less doesn't understand. You can work around this by
     either using ansi mode (or auto mode), or by using less -r (which will
     pass through all terminal control codes, not just color control
     codes).
 
     On some systems (such as MSYS in Windows), the terminal may support
     a different color mode than the pager (activated via the "pager"
     extension).
 
 ``commands``
 ------------
 
 ``status.relative``
     Make paths in ``hg status`` output relative to the current directory.
     (default: False)
 
 ``update.requiredest``
     Require that the user pass a destination when running ``hg update``.
     For example, ``hg update .::`` will be allowed, but a plain ``hg update``
     will be disallowed.
     (default: False)
 
 ``committemplate``
 ------------------
 
 ``changeset``
     String: configuration in this section is used as the template to
     customize the text shown in the editor when committing.
 
 In addition to pre-defined template keywords, commit log specific one
 below can be used for customization:
 
 ``extramsg``
     String: Extra message (typically 'Leave message empty to abort
     commit.'). This may be changed by some commands or extensions.
 
 For example, the template configuration below shows as same text as
 one shown by default::
 
     [committemplate]
     changeset = {desc}\n\n
         HG: Enter commit message.  Lines beginning with 'HG:' are removed.
         HG: {extramsg}
         HG: --
         HG: user: {author}\n{ifeq(p2rev, "-1", "",
        "HG: branch merge\n")
        }HG: branch '{branch}'\n{if(activebookmark,
        "HG: bookmark '{activebookmark}'\n")   }{subrepos %
        "HG: subrepo {subrepo}\n"              }{file_adds %
        "HG: added {file}\n"                   }{file_mods %
        "HG: changed {file}\n"                 }{file_dels %
        "HG: removed {file}\n"                 }{if(files, "",
        "HG: no files changed\n")}
 
 ``diff()``
     String: show the diff (see :hg:`help templates` for detail)
 
 Sometimes it is helpful to show the diff of the changeset in the editor without
 having to prefix 'HG: ' to each line so that highlighting works correctly. For
 this, Mercurial provides a special string which will ignore everything below
 it::
 
      HG: ------------------------ >8 ------------------------
 
 For example, the template configuration below will show the diff below the
 extra message::
 
     [committemplate]
     changeset = {desc}\n\n
         HG: Enter commit message.  Lines beginning with 'HG:' are removed.
         HG: {extramsg}
         HG: ------------------------ >8 ------------------------
         HG: Do not touch the line above.
         HG: Everything below will be removed.
         {diff()}
 
 .. note::
 
    For some problematic encodings (see :hg:`help win32mbcs` for
    detail), this customization should be configured carefully, to
    avoid showing broken characters.
 
    For example, if a multibyte character ending with backslash (0x5c) is
    followed by the ASCII character 'n' in the customized template,
    the sequence of backslash and 'n' is treated as line-feed unexpectedly
    (and the multibyte character is broken, too).
 
 Customized template is used for commands below (``--edit`` may be
 required):
 
 - :hg:`backout`
 - :hg:`commit`
 - :hg:`fetch` (for merge commit only)
 - :hg:`graft`
 - :hg:`histedit`
 - :hg:`import`
 - :hg:`qfold`, :hg:`qnew` and :hg:`qrefresh`
 - :hg:`rebase`
 - :hg:`shelve`
 - :hg:`sign`
 - :hg:`tag`
 - :hg:`transplant`
 
 Configuring items below instead of ``changeset`` allows showing
 customized message only for specific actions, or showing different
 messages for each action.
 
 - ``changeset.backout`` for :hg:`backout`
 - ``changeset.commit.amend.merge`` for :hg:`commit --amend` on merges
 - ``changeset.commit.amend.normal`` for :hg:`commit --amend` on other
 - ``changeset.commit.normal.merge`` for :hg:`commit` on merges
 - ``changeset.commit.normal.normal`` for :hg:`commit` on other
 - ``changeset.fetch`` for :hg:`fetch` (impling merge commit)
 - ``changeset.gpg.sign`` for :hg:`sign`
 - ``changeset.graft`` for :hg:`graft`
 - ``changeset.histedit.edit`` for ``edit`` of :hg:`histedit`
 - ``changeset.histedit.fold`` for ``fold`` of :hg:`histedit`
 - ``changeset.histedit.mess`` for ``mess`` of :hg:`histedit`
 - ``changeset.histedit.pick`` for ``pick`` of :hg:`histedit`
 - ``changeset.import.bypass`` for :hg:`import --bypass`
 - ``changeset.import.normal.merge`` for :hg:`import` on merges
 - ``changeset.import.normal.normal`` for :hg:`import` on other
 - ``changeset.mq.qnew`` for :hg:`qnew`
 - ``changeset.mq.qfold`` for :hg:`qfold`
 - ``changeset.mq.qrefresh`` for :hg:`qrefresh`
 - ``changeset.rebase.collapse`` for :hg:`rebase --collapse`
 - ``changeset.rebase.merge`` for :hg:`rebase` on merges
 - ``changeset.rebase.normal`` for :hg:`rebase` on other
 - ``changeset.shelve.shelve`` for :hg:`shelve`
 - ``changeset.tag.add`` for :hg:`tag` without ``--remove``
 - ``changeset.tag.remove`` for :hg:`tag --remove`
 - ``changeset.transplant.merge`` for :hg:`transplant` on merges
 - ``changeset.transplant.normal`` for :hg:`transplant` on other
 
 These dot-separated lists of names are treated as hierarchical ones.
 For example, ``changeset.tag.remove`` customizes the commit message
 only for :hg:`tag --remove`, but ``changeset.tag`` customizes the
 commit message for :hg:`tag` regardless of ``--remove`` option.
 
 When the external editor is invoked for a commit, the corresponding
 dot-separated list of names without the ``changeset.`` prefix
 (e.g. ``commit.normal.normal``) is in the ``HGEDITFORM`` environment
 variable.
 
 In this section, items other than ``changeset`` can be referred from
 others. For example, the configuration to list committed files up
 below can be referred as ``{listupfiles}``::
 
     [committemplate]
     listupfiles = {file_adds %
        "HG: added {file}\n"     }{file_mods %
        "HG: changed {file}\n"   }{file_dels %
        "HG: removed {file}\n"   }{if(files, "",
        "HG: no files changed\n")}
 
 ``decode/encode``
 -----------------
 
 Filters for transforming files on checkout/checkin. This would
 typically be used for newline processing or other
 localization/canonicalization of files.
 
 Filters consist of a filter pattern followed by a filter command.
 Filter patterns are globs by default, rooted at the repository root.
 For example, to match any file ending in ``.txt`` in the root
 directory only, use the pattern ``*.txt``. To match any file ending
 in ``.c`` anywhere in the repository, use the pattern ``**.c``.
 For each file only the first matching filter applies.
 
 The filter command can start with a specifier, either ``pipe:`` or
 ``tempfile:``. If no specifier is given, ``pipe:`` is used by default.
 
 A ``pipe:`` command must accept data on stdin and return the transformed
 data on stdout.
 
 Pipe example::
 
   [encode]
   # uncompress gzip files on checkin to improve delta compression
   # note: not necessarily a good idea, just an example
   *.gz = pipe: gunzip
 
   [decode]
   # recompress gzip files when writing them to the working dir (we
   # can safely omit "pipe:", because it's the default)
   *.gz = gzip
 
 A ``tempfile:`` command is a template. The string ``INFILE`` is replaced
 with the name of a temporary file that contains the data to be
 filtered by the command. The string ``OUTFILE`` is replaced with the name
 of an empty temporary file, where the filtered data must be written by
 the command.
 
 .. container:: windows
 
    .. note::
 
      The tempfile mechanism is recommended for Windows systems,
      where the standard shell I/O redirection operators often have
      strange effects and may corrupt the contents of your files.
 
 This filter mechanism is used internally by the ``eol`` extension to
 translate line ending characters between Windows (CRLF) and Unix (LF)
 format. We suggest you use the ``eol`` extension for convenience.
 
 
 ``defaults``
 ------------
 
 (defaults are deprecated. Don't use them. Use aliases instead.)
 
 Use the ``[defaults]`` section to define command defaults, i.e. the
 default options/arguments to pass to the specified commands.
 
 The following example makes :hg:`log` run in verbose mode, and
 :hg:`status` show only the modified files, by default::
 
   [defaults]
   log = -v
   status = -m
 
 The actual commands, instead of their aliases, must be used when
 defining command defaults. The command defaults will also be applied
 to the aliases of the commands defined.
 
 
 ``diff``
 --------
 
 Settings used when displaying diffs. Everything except for ``unified``
 is a Boolean and defaults to False. See :hg:`help config.annotate`
 for related options for the annotate command.
 
 ``git``
     Use git extended diff format.
 
 ``nobinary``
     Omit git binary patches.
 
 ``nodates``
     Don't include dates in diff headers.
 
 ``noprefix``
     Omit 'a/' and 'b/' prefixes from filenames. Ignored in plain mode.
 
 ``showfunc``
     Show which function each change is in.
 
 ``ignorews``
     Ignore white space when comparing lines.
 
 ``ignorewsamount``
     Ignore changes in the amount of white space.
 
 ``ignoreblanklines``
     Ignore changes whose lines are all blank.
 
 ``unified``
     Number of lines of context to show.
 
 ``email``
 ---------
 
 Settings for extensions that send email messages.
 
 ``from``
     Optional. Email address to use in "From" header and SMTP envelope
     of outgoing messages.
 
 ``to``
     Optional. Comma-separated list of recipients' email addresses.
 
 ``cc``
     Optional. Comma-separated list of carbon copy recipients'
     email addresses.
 
 ``bcc``
     Optional. Comma-separated list of blind carbon copy recipients'
     email addresses.
 
 ``method``
     Optional. Method to use to send email messages. If value is ``smtp``
     (default), use SMTP (see the ``[smtp]`` section for configuration).
     Otherwise, use as name of program to run that acts like sendmail
     (takes ``-f`` option for sender, list of recipients on command line,
     message on stdin). Normally, setting this to ``sendmail`` or
     ``/usr/sbin/sendmail`` is enough to use sendmail to send messages.
 
 ``charsets``
     Optional. Comma-separated list of character sets considered
     convenient for recipients. Addresses, headers, and parts not
     containing patches of outgoing messages will be encoded in the
     first character set to which conversion from local encoding
     (``$HGENCODING``, ``ui.fallbackencoding``) succeeds. If correct
     conversion fails, the text in question is sent as is.
     (default: '')
 
     Order of outgoing email character sets:
 
     1. ``us-ascii``: always first, regardless of settings
     2. ``email.charsets``: in order given by user
     3. ``ui.fallbackencoding``: if not in email.charsets
     4. ``$HGENCODING``: if not in email.charsets
     5. ``utf-8``: always last, regardless of settings
 
 Email example::
 
   [email]
   from = Joseph User <[e-mail]>
   method = /usr/sbin/sendmail
   # charsets for western Europeans
   # us-ascii, utf-8 omitted, as they are tried first and last
   charsets = iso-8859-1, iso-8859-15, windows-1252
 
 
 ``extensions``
 --------------
 
 Mercurial has an extension mechanism for adding new features. To
 enable an extension, create an entry for it in this section.
 
 If you know that the extension is already in Python's search path,
 you can give the name of the module, followed by ``=``, with nothing
 after the ``=``.
 
 Otherwise, give a name that you choose, followed by ``=``, followed by
 the path to the ``.py`` file (including the file name extension) that
 defines the extension.
 
 To explicitly disable an extension that is enabled in an hgrc of
 broader scope, prepend its path with ``!``, as in ``foo = !/ext/path``
 or ``foo = !`` when path is not supplied.
 
 Example for ``~/.hgrc``::
 
   [extensions]
   # (the churn extension will get loaded from Mercurial's path)
   churn =
   # (this extension will get loaded from the file specified)
   myfeature = ~/.hgext/myfeature.py
 
 
 ``format``
 ----------
 
 ``usegeneraldelta``
     Enable or disable the "generaldelta" repository format which improves
     repository compression by allowing "revlog" to store delta against arbitrary
     revision instead of the previous stored one. This provides significant
     improvement for repositories with branches.
 
     Repositories with this on-disk format require Mercurial version 1.9.
 
     Enabled by default.
 
 ``dotencode``
     Enable or disable the "dotencode" repository format which enhances
     the "fncache" repository format (which has to be enabled to use
     dotencode) to avoid issues with filenames starting with ._ on
     Mac OS X and spaces on Windows.
 
     Repositories with this on-disk format require Mercurial version 1.7.
 
     Enabled by default.
 
 ``usefncache``
     Enable or disable the "fncache" repository format which enhances
     the "store" repository format (which has to be enabled to use
     fncache) to allow longer filenames and avoids using Windows
     reserved names, e.g. "nul".
 
     Repositories with this on-disk format require Mercurial version 1.1.
 
     Enabled by default.
 
 ``usestore``
     Enable or disable the "store" repository format which improves
     compatibility with systems that fold case or otherwise mangle
     filenames. Disabling this option will allow you to store longer filenames
     in some situations at the expense of compatibility.
 
     Repositories with this on-disk format require Mercurial version 0.9.4.
 
     Enabled by default.
 
 ``graph``
 ---------
 
 Web graph view configuration. This section let you change graph
 elements display properties by branches, for instance to make the
 ``default`` branch stand out.
 
 Each line has the following format::
 
     <branch>.<argument> = <value>
 
 where ``<branch>`` is the name of the branch being
 customized. Example::
 
     [graph]
     # 2px width
     default.width = 2
     # red color
     default.color = FF0000
 
 Supported arguments:
 
 ``width``
     Set branch edges width in pixels.
 
 ``color``
     Set branch edges color in hexadecimal RGB notation.
 
 ``hooks``
 ---------
 
 Commands or Python functions that get automatically executed by
 various actions such as starting or finishing a commit. Multiple
 hooks can be run for the same action by appending a suffix to the
 action. Overriding a site-wide hook can be done by changing its
 value or setting it to an empty string.  Hooks can be prioritized
 by adding a prefix of ``priority.`` to the hook name on a new line
 and setting the priority. The default priority is 0.
 
 Example ``.hg/hgrc``::
 
   [hooks]
   # update working directory after adding changesets
   changegroup.update = hg update
   # do not use the site-wide hook
   incoming =
   incoming.email = /my/email/hook
   incoming.autobuild = /my/build/hook
   # force autobuild hook to run before other incoming hooks
   priority.incoming.autobuild = 1
 
 Most hooks are run with environment variables set that give useful
-additional information. For each hook below, the environment
-variables it is passed are listed with names of the form ``$HG_foo``.
+additional information. For each hook below, the environment variables
+it is passed are listed with names of the form ``$HG_foo``. The
+``$HG_HOOKTYPE`` variable is set for all hooks. It contains the type of
+hook which triggered the run. In the example about this will be
+``$HG_HOOKTYPE=incoming``.
 
 ``changegroup``
   Run after a changegroup has been added via push, pull or unbundle.  ID of the
   first new changeset is in ``$HG_NODE`` and last in ``$HG_NODE_LAST``. URL
   from which changes came is in ``$HG_URL``.
 
 ``commit``
   Run after a changeset has been created in the local repository. ID
   of the newly created changeset is in ``$HG_NODE``. Parent changeset
   IDs are in ``$HG_PARENT1`` and ``$HG_PARENT2``.
 
 ``incoming``
   Run after a changeset has been pulled, pushed, or unbundled into
   the local repository. The ID of the newly arrived changeset is in
   ``$HG_NODE``. URL that was source of changes came is in ``$HG_URL``.
 
 ``outgoing``
   Run after sending changes from local repository to another. ID of
   first changeset sent is in ``$HG_NODE``. Source of operation is in
   ``$HG_SOURCE``; Also see :hg:`help config.hooks.preoutgoing` hook.
 
 ``post-<command>``
   Run after successful invocations of the associated command. The
   contents of the command line are passed as ``$HG_ARGS`` and the result
   code in ``$HG_RESULT``. Parsed command line arguments are passed as
   ``$HG_PATS`` and ``$HG_OPTS``. These contain string representations of
   the python data internally passed to <command>. ``$HG_OPTS`` is a
   dictionary of options (with unspecified options set to their defaults).
   ``$HG_PATS`` is a list of arguments. Hook failure is ignored.
 
 ``fail-<command>``
   Run after a failed invocation of an associated command. The contents
   of the command line are passed as ``$HG_ARGS``. Parsed command line
   arguments are passed as ``$HG_PATS`` and ``$HG_OPTS``. These contain
   string representations of the python data internally passed to
   <command>. ``$HG_OPTS`` is a dictionary of options (with unspecified
   options set to their defaults). ``$HG_PATS`` is a list of arguments.
   Hook failure is ignored.
 
 ``pre-<command>``
   Run before executing the associated command. The contents of the
   command line are passed as ``$HG_ARGS``. Parsed command line arguments
   are passed as ``$HG_PATS`` and ``$HG_OPTS``. These contain string
   representations of the data internally passed to <command>. ``$HG_OPTS``
   is a dictionary of options (with unspecified options set to their
   defaults). ``$HG_PATS`` is a list of arguments. If the hook returns
   failure, the command doesn't execute and Mercurial returns the failure
   code.
 
 ``prechangegroup``
   Run before a changegroup is added via push, pull or unbundle. Exit
   status 0 allows the changegroup to proceed. Non-zero status will
   cause the push, pull or unbundle to fail. URL from which changes
   will come is in ``$HG_URL``.
 
 ``precommit``
   Run before starting a local commit. Exit status 0 allows the
   commit to proceed. Non-zero status will cause the commit to fail.
   Parent changeset IDs are in ``$HG_PARENT1`` and ``$HG_PARENT2``.
 
 ``prelistkeys``
   Run before listing pushkeys (like bookmarks) in the
   repository. Non-zero status will cause failure. The key namespace is
   in ``$HG_NAMESPACE``.
 
 ``preoutgoing``
   Run before collecting changes to send from the local repository to
   another. Non-zero status will cause failure. This lets you prevent
   pull over HTTP or SSH. Also prevents against local pull, push
   (outbound) or bundle commands, but not effective, since you can
   just copy files instead then. Source of operation is in
   ``$HG_SOURCE``. If "serve", operation is happening on behalf of remote
   SSH or HTTP repository. If "push", "pull" or "bundle", operation
   is happening on behalf of repository on same system.
 
 ``prepushkey``
   Run before a pushkey (like a bookmark) is added to the
   repository. Non-zero status will cause the key to be rejected. The
   key namespace is in ``$HG_NAMESPACE``, the key is in ``$HG_KEY``,
   the old value (if any) is in ``$HG_OLD``, and the new value is in
   ``$HG_NEW``.
 
 ``pretag``
   Run before creating a tag. Exit status 0 allows the tag to be
   created. Non-zero status will cause the tag to fail. ID of
   changeset to tag is in ``$HG_NODE``. Name of tag is in ``$HG_TAG``. Tag is
   local if ``$HG_LOCAL=1``, in repository if ``$HG_LOCAL=0``.
 
 ``pretxnopen``
   Run before any new repository transaction is open. The reason for the
   transaction will be in ``$HG_TXNNAME`` and a unique identifier for the
   transaction will be in ``HG_TXNID``. A non-zero status will prevent the
   transaction from being opened.
 
 ``pretxnclose``
   Run right before the transaction is actually finalized. Any repository change
   will be visible to the hook program. This lets you validate the transaction
   content or change it. Exit status 0 allows the commit to proceed. Non-zero
   status will cause the transaction to be rolled back. The reason for the
   transaction opening will be in ``$HG_TXNNAME`` and a unique identifier for
   the transaction will be in ``HG_TXNID``. The rest of the available data will
   vary according the transaction type. New changesets will add ``$HG_NODE`` (id
   of the first added changeset), ``$HG_NODE_LAST`` (id of the last added
   changeset), ``$HG_URL`` and ``$HG_SOURCE`` variables, bookmarks and phases
   changes will set ``HG_BOOKMARK_MOVED`` and ``HG_PHASES_MOVED`` to ``1``, etc.
 
 ``txnclose``
   Run after any repository transaction has been committed. At this
   point, the transaction can no longer be rolled back. The hook will run
   after the lock is released. See :hg:`help config.hooks.pretxnclose` docs for
   details about available variables.
 
 ``txnabort``
   Run when a transaction is aborted. See :hg:`help config.hooks.pretxnclose`
   docs for details about available variables.
 
 ``pretxnchangegroup``
   Run after a changegroup has been added via push, pull or unbundle, but before
   the transaction has been committed. Changegroup is visible to hook program.
   This lets you validate incoming changes before accepting them. Passed the ID
   of the first new changeset in ``$HG_NODE`` and last in ``$HG_NODE_LAST``.
   Exit status 0 allows the transaction to commit. Non-zero status will cause
   the transaction to be rolled back and the push, pull or unbundle will fail.
   URL that was source of changes is in ``$HG_URL``.
 
 ``pretxncommit``
   Run after a changeset has been created but the transaction not yet
   committed. Changeset is visible to hook program. This lets you
   validate commit message and changes. Exit status 0 allows the
   commit to proceed. Non-zero status will cause the transaction to
   be rolled back. ID of changeset is in ``$HG_NODE``. Parent changeset
   IDs are in ``$HG_PARENT1`` and ``$HG_PARENT2``.
 
 ``preupdate``
   Run before updating the working directory. Exit status 0 allows
   the update to proceed. Non-zero status will prevent the update.
   Changeset ID of first new parent is in ``$HG_PARENT1``. If merge, ID
   of second new parent is in ``$HG_PARENT2``.
 
 ``listkeys``
   Run after listing pushkeys (like bookmarks) in the repository. The
   key namespace is in ``$HG_NAMESPACE``. ``$HG_VALUES`` is a
   dictionary containing the keys and values.
 
 ``pushkey``
   Run after a pushkey (like a bookmark) is added to the
   repository. The key namespace is in ``$HG_NAMESPACE``, the key is in
   ``$HG_KEY``, the old value (if any) is in ``$HG_OLD``, and the new
   value is in ``$HG_NEW``.
 
 ``tag``
   Run after a tag is created. ID of tagged changeset is in ``$HG_NODE``.
   Name of tag is in ``$HG_TAG``. Tag is local if ``$HG_LOCAL=1``, in
   repository if ``$HG_LOCAL=0``.
 
 ``update``
   Run after updating the working directory. Changeset ID of first
   new parent is in ``$HG_PARENT1``. If merge, ID of second new parent is
   in ``$HG_PARENT2``. If the update succeeded, ``$HG_ERROR=0``. If the
   update failed (e.g. because conflicts not resolved), ``$HG_ERROR=1``.
 
 .. note::
 
    It is generally better to use standard hooks rather than the
    generic pre- and post- command hooks as they are guaranteed to be
    called in the appropriate contexts for influencing transactions.
    Also, hooks like "commit" will be called in all contexts that
    generate a commit (e.g. tag) and not just the commit command.
 
 .. note::
 
    Environment variables with empty values may not be passed to
    hooks on platforms such as Windows. As an example, ``$HG_PARENT2``
    will have an empty value under Unix-like platforms for non-merge
    changesets, while it will not be available at all under Windows.
 
 The syntax for Python hooks is as follows::
 
   hookname = python:modulename.submodule.callable
   hookname = python:/path/to/python/module.py:callable
 
 Python hooks are run within the Mercurial process. Each hook is
 called with at least three keyword arguments: a ui object (keyword
 ``ui``), a repository object (keyword ``repo``), and a ``hooktype``
 keyword that tells what kind of hook is used. Arguments listed as
 environment variables above are passed as keyword arguments, with no
 ``HG_`` prefix, and names in lower case.
 
 If a Python hook returns a "true" value or raises an exception, this
 is treated as a failure.
 
 
 ``hostfingerprints``
 --------------------
 
 (Deprecated. Use ``[hostsecurity]``'s ``fingerprints`` options instead.)
 
 Fingerprints of the certificates of known HTTPS servers.
 
 A HTTPS connection to a server with a fingerprint configured here will
 only succeed if the servers certificate matches the fingerprint.
 This is very similar to how ssh known hosts works.
 
 The fingerprint is the SHA-1 hash value of the DER encoded certificate.
 Multiple values can be specified (separated by spaces or commas). This can
 be used to define both old and new fingerprints while a host transitions
 to a new certificate.
 
 The CA chain and web.cacerts is not used for servers with a fingerprint.
 
 For example::
 
     [hostfingerprints]
     hg.intevation.de = fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33
     hg.intevation.org = fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33
 
 ``hostsecurity``
 ----------------
 
 Used to specify global and per-host security settings for connecting to
 other machines.
 
 The following options control default behavior for all hosts.
 
 ``ciphers``
     Defines the cryptographic ciphers to use for connections.
 
     Value must be a valid OpenSSL Cipher List Format as documented at
     https://www.openssl.org/docs/manmaster/apps/ciphers.html#CIPHER-LIST-FORMAT.
 
     This setting is for advanced users only. Setting to incorrect values
     can significantly lower connection security or decrease performance.
     You have been warned.
 
     This option requires Python 2.7.
 
 ``minimumprotocol``
     Defines the minimum channel encryption protocol to use.
 
     By default, the highest version of TLS supported by both client and server
     is used.
 
     Allowed values are: ``tls1.0``, ``tls1.1``, ``tls1.2``.
 
     When running on an old Python version, only ``tls1.0`` is allowed since
     old versions of Python only support up to TLS 1.0.
 
     When running a Python that supports modern TLS versions, the default is
     ``tls1.1``. ``tls1.0`` can still be used to allow TLS 1.0. However, this
     weakens security and should only be used as a feature of last resort if
     a server does not support TLS 1.1+.
 
 Options in the ``[hostsecurity]`` section can have the form
 ``hostname``:``setting``. This allows multiple settings to be defined on a
 per-host basis.
 
 The following per-host settings can be defined.
 
 ``ciphers``
     This behaves like ``ciphers`` as described above except it only applies
     to the host on which it is defined.
 
 ``fingerprints``
     A list of hashes of the DER encoded peer/remote certificate. Values have
     the form ``algorithm``:``fingerprint``. e.g.
     ``sha256:c3ab8ff13720e8ad9047dd39466b3c8974e592c2fa383d4a3960714caef0c4f2``.
 
     The following algorithms/prefixes are supported: ``sha1``, ``sha256``,
     ``sha512``.
 
     Use of ``sha256`` or ``sha512`` is preferred.
 
     If a fingerprint is specified, the CA chain is not validated for this
     host and Mercurial will require the remote certificate to match one
     of the fingerprints specified. This means if the server updates its
     certificate, Mercurial will abort until a new fingerprint is defined.
     This can provide stronger security than traditional CA-based validation
     at the expense of convenience.
 
     This option takes precedence over ``verifycertsfile``.
 
 ``minimumprotocol``
     This behaves like ``minimumprotocol`` as described above except it
     only applies to the host on which it is defined.
 
 ``verifycertsfile``
     Path to file a containing a list of PEM encoded certificates used to
     verify the server certificate. Environment variables and ``~user``
     constructs are expanded in the filename.
 
     The server certificate or the certificate's certificate authority (CA)
     must match a certificate from this file or certificate verification
     will fail and connections to the server will be refused.
 
     If defined, only certificates provided by this file will be used:
     ``web.cacerts`` and any system/default certificates will not be
     used.
 
     This option has no effect if the per-host ``fingerprints`` option
     is set.
 
     The format of the file is as follows::
 
         -----BEGIN CERTIFICATE-----
         ... (certificate in base64 PEM encoding) ...
         -----END CERTIFICATE-----
         -----BEGIN CERTIFICATE-----
         ... (certificate in base64 PEM encoding) ...
         -----END CERTIFICATE-----
 
 For example::
 
     [hostsecurity]
     hg.example.com:fingerprints = sha256:c3ab8ff13720e8ad9047dd39466b3c8974e592c2fa383d4a3960714caef0c4f2
     hg2.example.com:fingerprints = sha1:914f1aff87249c09b6859b88b1906d30756491ca, sha1:fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33
     foo.example.com:verifycertsfile = /etc/ssl/trusted-ca-certs.pem
 
 To change the default minimum protocol version to TLS 1.2 but to allow TLS 1.1
 when connecting to ``hg.example.com``::
 
     [hostsecurity]
     minimumprotocol = tls1.2
     hg.example.com:minimumprotocol = tls1.1
 
 ``http_proxy``
 --------------
 
 Used to access web-based Mercurial repositories through a HTTP
 proxy.
 
 ``host``
     Host name and (optional) port of the proxy server, for example
     "myproxy:8000".
 
 ``no``
     Optional. Comma-separated list of host names that should bypass
     the proxy.
 
 ``passwd``
     Optional. Password to authenticate with at the proxy server.
 
 ``user``
     Optional. User name to authenticate with at the proxy server.
 
 ``always``
     Optional. Always use the proxy, even for localhost and any entries
     in ``http_proxy.no``. (default: False)
 
 ``merge``
 ---------
 
 This section specifies behavior during merges and updates.
 
 ``checkignored``
    Controls behavior when an ignored file on disk has the same name as a tracked
    file in the changeset being merged or updated to, and has different
    contents. Options are ``abort``, ``warn`` and ``ignore``. With ``abort``,
    abort on such files. With ``warn``, warn on such files and back them up as
    ``.orig``. With ``ignore``, don't print a warning and back them up as
    ``.orig``. (default: ``abort``)
 
 ``checkunknown``
    Controls behavior when an unknown file that isn't ignored has the same name
    as a tracked file in the changeset being merged or updated to, and has
    different contents. Similar to ``merge.checkignored``, except for files that
    are not ignored. (default: ``abort``)
 
 ``merge-patterns``
 ------------------
 
 This section specifies merge tools to associate with particular file
 patterns. Tools matched here will take precedence over the default
 merge tool. Patterns are globs by default, rooted at the repository
 root.
 
 Example::
 
   [merge-patterns]
   **.c = kdiff3
   **.jpg = myimgmerge
 
 ``merge-tools``
 ---------------
 
 This section configures external merge tools to use for file-level
 merges. This section has likely been preconfigured at install time.
 Use :hg:`config merge-tools` to check the existing configuration.
 Also see :hg:`help merge-tools` for more details.
 
 Example ``~/.hgrc``::
 
   [merge-tools]
   # Override stock tool location
   kdiff3.executable = ~/bin/kdiff3
   # Specify command line
   kdiff3.args = $base $local $other -o $output
   # Give higher priority
   kdiff3.priority = 1
 
   # Changing the priority of preconfigured tool
   meld.priority = 0
 
   # Disable a preconfigured tool
   vimdiff.disabled = yes
 
   # Define new tool
   myHtmlTool.args = -m $local $other $base $output
   myHtmlTool.regkey = Software\FooSoftware\HtmlMerge
   myHtmlTool.priority = 1
 
 Supported arguments:
 
 ``priority``
   The priority in which to evaluate this tool.
   (default: 0)
 
 ``executable``
   Either just the name of the executable or its pathname.
 
   .. container:: windows
 
     On Windows, the path can use environment variables with ${ProgramFiles}
     syntax.
 
   (default: the tool name)
 
 ``args``
   The arguments to pass to the tool executable. You can refer to the
   files being merged as well as the output file through these
   variables: ``$base``, ``$local``, ``$other``, ``$output``. The meaning
   of ``$local`` and ``$other`` can vary depending on which action is being
   performed. During and update or merge, ``$local`` represents the original
   state of the file, while ``$other`` represents the commit you are updating
   to or the commit you are merging with. During a rebase ``$local``
   represents the destination of the rebase, and ``$other`` represents the
   commit being rebased.
   (default: ``$local $base $other``)
 
 ``premerge``
   Attempt to run internal non-interactive 3-way merge tool before
   launching external tool.  Options are ``true``, ``false``, ``keep`` or
   ``keep-merge3``. The ``keep`` option will leave markers in the file if the
   premerge fails. The ``keep-merge3`` will do the same but include information
   about the base of the merge in the marker (see internal :merge3 in
   :hg:`help merge-tools`).
   (default: True)
 
 ``binary``
   This tool can merge binary files. (default: False, unless tool
   was selected by file pattern match)
 
 ``symlink``
   This tool can merge symlinks. (default: False)
 
 ``check``
   A list of merge success-checking options:
 
   ``changed``
     Ask whether merge was successful when the merged file shows no changes.
   ``conflicts``
     Check whether there are conflicts even though the tool reported success.
   ``prompt``
     Always prompt for merge success, regardless of success reported by tool.
 
 ``fixeol``
   Attempt to fix up EOL changes caused by the merge tool.
   (default: False)
 
 ``gui``
   This tool requires a graphical interface to run. (default: False)
 
 .. container:: windows
 
   ``regkey``
     Windows registry key which describes install location of this
     tool. Mercurial will search for this key first under
     ``HKEY_CURRENT_USER`` and then under ``HKEY_LOCAL_MACHINE``.
     (default: None)
 
   ``regkeyalt``
     An alternate Windows registry key to try if the first key is not
     found.  The alternate key uses the same ``regname`` and ``regappend``
     semantics of the primary key.  The most common use for this key
     is to search for 32bit applications on 64bit operating systems.
     (default: None)
 
   ``regname``
     Name of value to read from specified registry key.
     (default: the unnamed (default) value)
 
   ``regappend``
     String to append to the value read from the registry, typically
     the executable name of the tool.
     (default: None)
 
 
 ``patch``
 ---------
 
 Settings used when applying patches, for instance through the 'import'
 command or with Mercurial Queues extension.
 
 ``eol``
     When set to 'strict' patch content and patched files end of lines
     are preserved. When set to ``lf`` or ``crlf``, both files end of
     lines are ignored when patching and the result line endings are
     normalized to either LF (Unix) or CRLF (Windows). When set to
     ``auto``, end of lines are again ignored while patching but line
     endings in patched files are normalized to their original setting
     on a per-file basis. If target file does not exist or has no end
     of line, patch line endings are preserved.
     (default: strict)
 
 ``fuzz``
     The number of lines of 'fuzz' to allow when applying patches. This
     controls how much context the patcher is allowed to ignore when
     trying to apply a patch.
     (default: 2)
 
 ``paths``
 ---------
 
 Assigns symbolic names and behavior to repositories.
 
 Options are symbolic names defining the URL or directory that is the
 location of the repository. Example::
 
     [paths]
     my_server = https://example.com/my_repo
     local_path = /home/me/repo
 
 These symbolic names can be used from the command line. To pull
 from ``my_server``: :hg:`pull my_server`. To push to ``local_path``:
 :hg:`push local_path`.
 
 Options containing colons (``:``) denote sub-options that can influence
 behavior for that specific path. Example::
 
     [paths]
     my_server = https://example.com/my_path
     my_server:pushurl = ssh://example.com/my_path
 
 The following sub-options can be defined:
 
 ``pushurl``
    The URL to use for push operations. If not defined, the location
    defined by the path's main entry is used.
 
 ``pushrev``
    A revset defining which revisions to push by default.
 
    When :hg:`push` is executed without a ``-r`` argument, the revset
    defined by this sub-option is evaluated to determine what to push.
 
    For example, a value of ``.`` will push the working directory's
    revision by default.
 
    Revsets specifying bookmarks will not result in the bookmark being
    pushed.
 
 The following special named paths exist:
 
 ``default``
    The URL or directory to use when no source or remote is specified.
 
    :hg:`clone` will automatically define this path to the location the
    repository was cloned from.
 
 ``default-push``
    (deprecated) The URL or directory for the default :hg:`push` location.
    ``default:pushurl`` should be used instead.
 
 ``phases``
 ----------
 
 Specifies default handling of phases. See :hg:`help phases` for more
 information about working with phases.
 
 ``publish``
     Controls draft phase behavior when working as a server. When true,
     pushed changesets are set to public in both client and server and
     pulled or cloned changesets are set to public in the client.
     (default: True)
 
 ``new-commit``
     Phase of newly-created commits.
     (default: draft)
 
 ``checksubrepos``
     Check the phase of the current revision of each subrepository. Allowed
     values are "ignore", "follow" and "abort". For settings other than
     "ignore", the phase of the current revision of each subrepository is
     checked before committing the parent repository. If any of those phases is
     greater than the phase of the parent repository (e.g. if a subrepo is in a
     "secret" phase while the parent repo is in "draft" phase), the commit is
     either aborted (if checksubrepos is set to "abort") or the higher phase is
     used for the parent repository commit (if set to "follow").
     (default: follow)
 
 
 ``profiling``
 -------------
 
 Specifies profiling type, format, and file output. Two profilers are
 supported: an instrumenting profiler (named ``ls``), and a sampling
 profiler (named ``stat``).
 
 In this section description, 'profiling data' stands for the raw data
 collected during profiling, while 'profiling report' stands for a
 statistical text report generated from the profiling data. The
 profiling is done using lsprof.
 
 ``enabled``
     Enable the profiler.
     (default: false)
 
     This is equivalent to passing ``--profile`` on the command line.
 
 ``type``
     The type of profiler to use.
     (default: stat)
 
     ``ls``
       Use Python's built-in instrumenting profiler. This profiler
       works on all platforms, but each line number it reports is the
       first line of a function. This restriction makes it difficult to
       identify the expensive parts of a non-trivial function.
     ``stat``
       Use a statistical profiler, statprof. This profiler is most
       useful for profiling commands that run for longer than about 0.1
       seconds.
 
 ``format``
     Profiling format.  Specific to the ``ls`` instrumenting profiler.
     (default: text)
 
     ``text``
       Generate a profiling report. When saving to a file, it should be
       noted that only the report is saved, and the profiling data is
       not kept.
     ``kcachegrind``
       Format profiling data for kcachegrind use: when saving to a
       file, the generated file can directly be loaded into
       kcachegrind.
 
 ``statformat``
     Profiling format for the ``stat`` profiler.
     (default: hotpath)
 
     ``hotpath``
       Show a tree-based display containing the hot path of execution (where
       most time was spent).
     ``bymethod``
       Show a table of methods ordered by how frequently they are active.
     ``byline``
       Show a table of lines in files ordered by how frequently they are active.
     ``json``
       Render profiling data as JSON.
 
 ``frequency``
     Sampling frequency.  Specific to the ``stat`` sampling profiler.
     (default: 1000)
 
 ``output``
     File path where profiling data or report should be saved. If the
     file exists, it is replaced. (default: None, data is printed on
     stderr)
 
 ``sort``
     Sort field.  Specific to the ``ls`` instrumenting profiler.
     One of ``callcount``, ``reccallcount``, ``totaltime`` and
     ``inlinetime``.
     (default: inlinetime)
 
 ``limit``
     Number of lines to show. Specific to the ``ls`` instrumenting profiler.
     (default: 30)
 
 ``nested``
     Show at most this number of lines of drill-down info after each main entry.
     This can help explain the difference between Total and Inline.
     Specific to the ``ls`` instrumenting profiler.
     (default: 5)
 
 ``progress``
 ------------
 
 Mercurial commands can draw progress bars that are as informative as
 possible. Some progress bars only offer indeterminate information, while others
 have a definite end point.
 
 ``delay``
     Number of seconds (float) before showing the progress bar. (default: 3)
 
 ``changedelay``
     Minimum delay before showing a new topic. When set to less than 3 * refresh,
     that value will be used instead. (default: 1)
 
 ``refresh``
     Time in seconds between refreshes of the progress bar. (default: 0.1)
 
 ``format``
     Format of the progress bar.
 
     Valid entries for the format field are ``topic``, ``bar``, ``number``,
     ``unit``, ``estimate``, ``speed``, and ``item``. ``item`` defaults to the
     last 20 characters of the item, but this can be changed by adding either
     ``-<num>`` which would take the last num characters, or ``+<num>`` for the
     first num characters.
 
     (default: topic bar number estimate)
 
 ``width``
     If set, the maximum width of the progress information (that is, min(width,
     term width) will be used).
 
 ``clear-complete``
     Clear the progress bar after it's done. (default: True)
 
 ``disable``
     If true, don't show a progress bar.
 
 ``assume-tty``
     If true, ALWAYS show a progress bar, unless disable is given.
 
 ``rebase``
 ----------
 
 ``allowdivergence``
     Default to False, when True allow creating divergence when performing
     rebase of obsolete changesets.
 
 ``revsetalias``
 ---------------
 
 Alias definitions for revsets. See :hg:`help revsets` for details.
 
 ``server``
 ----------
 
 Controls generic server settings.
 
 ``compressionengines``
     List of compression engines and their relative priority to advertise
     to clients.
 
     The order of compression engines determines their priority, the first
     having the highest priority. If a compression engine is not listed
     here, it won't be advertised to clients.
 
     If not set (the default), built-in defaults are used. Run
     :hg:`debuginstall` to list available compression engines and their
     default wire protocol priority.
 
     Older Mercurial clients only support zlib compression and this setting
     has no effect for legacy clients.
 
 ``uncompressed``
     Whether to allow clients to clone a repository using the
     uncompressed streaming protocol. This transfers about 40% more
     data than a regular clone, but uses less memory and CPU on both
     server and client. Over a LAN (100 Mbps or better) or a very fast
     WAN, an uncompressed streaming clone is a lot faster (~10x) than a
     regular clone. Over most WAN connections (anything slower than
     about 6 Mbps), uncompressed streaming is slower, because of the
     extra data transfer overhead. This mode will also temporarily hold
     the write lock while determining what data to transfer.
     (default: True)
 
 ``preferuncompressed``
     When set, clients will try to use the uncompressed streaming
     protocol. (default: False)
 
 ``validate``
     Whether to validate the completeness of pushed changesets by
     checking that all new file revisions specified in manifests are
     present. (default: False)
 
 ``maxhttpheaderlen``
     Instruct HTTP clients not to send request headers longer than this
     many bytes. (default: 1024)
 
 ``bundle1``
     Whether to allow clients to push and pull using the legacy bundle1
     exchange format. (default: True)
 
 ``bundle1gd``
     Like ``bundle1`` but only used if the repository is using the
     *generaldelta* storage format. (default: True)
 
 ``bundle1.push``
     Whether to allow clients to push using the legacy bundle1 exchange
     format. (default: True)
 
 ``bundle1gd.push``
     Like ``bundle1.push`` but only used if the repository is using the
     *generaldelta* storage format. (default: True)
 
 ``bundle1.pull``
     Whether to allow clients to pull using the legacy bundle1 exchange
     format. (default: True)
 
 ``bundle1gd.pull``
     Like ``bundle1.pull`` but only used if the repository is using the
     *generaldelta* storage format. (default: True)
 
     Large repositories using the *generaldelta* storage format should
     consider setting this option because converting *generaldelta*
     repositories to the exchange format required by the bundle1 data
     format can consume a lot of CPU.
 
 ``zliblevel``
     Integer between ``-1`` and ``9`` that controls the zlib compression level
     for wire protocol commands that send zlib compressed output (notably the
     commands that send repository history data).
 
     The default (``-1``) uses the default zlib compression level, which is
     likely equivalent to ``6``. ``0`` means no compression. ``9`` means
     maximum compression.
 
     Setting this option allows server operators to make trade-offs between
     bandwidth and CPU used. Lowering the compression lowers CPU utilization
     but sends more bytes to clients.
 
     This option only impacts the HTTP server.
 
 ``zstdlevel``
     Integer between ``1`` and ``22`` that controls the zstd compression level
     for wire protocol commands. ``1`` is the minimal amount of compression and
     ``22`` is the highest amount of compression.
 
     The default (``3``) should be significantly faster than zlib while likely
     delivering better compression ratios.
 
     This option only impacts the HTTP server.
 
     See also ``server.zliblevel``.
 
 ``smtp``
 --------
 
 Configuration for extensions that need to send email messages.
 
 ``host``
     Host name of mail server, e.g. "mail.example.com".
 
 ``port``
     Optional. Port to connect to on mail server. (default: 465 if
     ``tls`` is smtps; 25 otherwise)
 
 ``tls``
     Optional. Method to enable TLS when connecting to mail server: starttls,
     smtps or none. (default: none)
 
 ``username``
     Optional. User name for authenticating with the SMTP server.
     (default: None)
 
 ``password``
     Optional. Password for authenticating with the SMTP server. If not
     specified, interactive sessions will prompt the user for a
     password; non-interactive sessions will fail. (default: None)
 
 ``local_hostname``
     Optional. The hostname that the sender can use to identify
     itself to the MTA.
 
 
 ``subpaths``
 ------------
 
 Subrepository source URLs can go stale if a remote server changes name
 or becomes temporarily unavailable. This section lets you define
 rewrite rules of the form::
 
     <pattern> = <replacement>
 
 where ``pattern`` is a regular expression matching a subrepository
 source URL and ``replacement`` is the replacement string used to
 rewrite it. Groups can be matched in ``pattern`` and referenced in
 ``replacements``. For instance::
 
     http://server/(.*)-hg/ = http://hg.server/\1/
 
 rewrites ``http://server/foo-hg/`` into ``http://hg.server/foo/``.
 
 Relative subrepository paths are first made absolute, and the
 rewrite rules are then applied on the full (absolute) path. If ``pattern``
 doesn't match the full path, an attempt is made to apply it on the
 relative path alone. The rules are applied in definition order.
 
 ``templatealias``
 -----------------
 
 Alias definitions for templates. See :hg:`help templates` for details.
 
 ``templates``
 -------------
 
 Use the ``[templates]`` section to define template strings.
 See :hg:`help templates` for details.
 
 ``trusted``
 -----------
 
 Mercurial will not use the settings in the
 ``.hg/hgrc`` file from a repository if it doesn't belong to a trusted
 user or to a trusted group, as various hgrc features allow arbitrary
 commands to be run. This issue is often encountered when configuring
 hooks or extensions for shared repositories or servers. However,
 the web interface will use some safe settings from the ``[web]``
 section.
 
 This section specifies what users and groups are trusted. The
 current user is always trusted. To trust everybody, list a user or a
 group with name ``*``. These settings must be placed in an
 *already-trusted file* to take effect, such as ``$HOME/.hgrc`` of the
 user or service running Mercurial.
 
 ``users``
   Comma-separated list of trusted users.
 
 ``groups``
   Comma-separated list of trusted groups.
 
 
 ``ui``
 ------
 
 User interface controls.
 
 ``archivemeta``
     Whether to include the .hg_archival.txt file containing meta data
     (hashes for the repository base and for tip) in archives created
     by the :hg:`archive` command or downloaded via hgweb.
     (default: True)
 
 ``askusername``
     Whether to prompt for a username when committing. If True, and
     neither ``$HGUSER`` nor ``$EMAIL`` has been specified, then the user will
     be prompted to enter a username. If no username is entered, the
     default ``USER@HOST`` is used instead.
     (default: False)
 
 ``clonebundles``
     Whether the "clone bundles" feature is enabled.
 
     When enabled, :hg:`clone` may download and apply a server-advertised
     bundle file from a URL instead of using the normal exchange mechanism.
 
     This can likely result in faster and more reliable clones.
 
     (default: True)
 
 ``clonebundlefallback``
     Whether failure to apply an advertised "clone bundle" from a server
     should result in fallback to a regular clone.
 
     This is disabled by default because servers advertising "clone
     bundles" often do so to reduce server load. If advertised bundles
     start mass failing and clients automatically fall back to a regular
     clone, this would add significant and unexpected load to the server
     since the server is expecting clone operations to be offloaded to
     pre-generated bundles. Failing fast (the default behavior) ensures
     clients don't overwhelm the server when "clone bundle" application
     fails.
 
     (default: False)
 
 ``clonebundleprefers``
     Defines preferences for which "clone bundles" to use.
 
     Servers advertising "clone bundles" may advertise multiple available
     bundles. Each bundle may have different attributes, such as the bundle
     type and compression format. This option is used to prefer a particular
     bundle over another.
 
     The following keys are defined by Mercurial:
 
     BUNDLESPEC
        A bundle type specifier. These are strings passed to :hg:`bundle -t`.
        e.g. ``gzip-v2`` or ``bzip2-v1``.
 
     COMPRESSION
        The compression format of the bundle. e.g. ``gzip`` and ``bzip2``.
 
     Server operators may define custom keys.
 
     Example values: ``COMPRESSION=bzip2``,
     ``BUNDLESPEC=gzip-v2, COMPRESSION=gzip``.
 
     By default, the first bundle advertised by the server is used.
 
 ``color``
     String: when to use to colorize output. possible value are auto, always,
     never, or debug (default: never). 'auto' will use color whenever it seems
     possible. See :hg:`help color` for details.
 
     (in addition a boolean can be used in place always/never)
 
 ``commitsubrepos``
     Whether to commit modified subrepositories when committing the
     parent repository. If False and one subrepository has uncommitted
     changes, abort the commit.
     (default: False)
 
 ``debug``
     Print debugging information. (default: False)
 
 ``editor``
     The editor to use during a commit. (default: ``$EDITOR`` or ``vi``)
 
 ``fallbackencoding``
     Encoding to try if it's not possible to decode the changelog using
     UTF-8. (default: ISO-8859-1)
 
 ``graphnodetemplate``
     The template used to print changeset nodes in an ASCII revision graph.
     (default: ``{graphnode}``)
 
 ``ignore``
     A file to read per-user ignore patterns from. This file should be
     in the same format as a repository-wide .hgignore file. Filenames
     are relative to the repository root. This option supports hook syntax,
     so if you want to specify multiple ignore files, you can do so by
     setting something like ``ignore.other = ~/.hgignore2``. For details
     of the ignore file format, see the ``hgignore(5)`` man page.
 
 ``interactive``
     Allow to prompt the user. (default: True)
 
 ``interface``
     Select the default interface for interactive features (default: text).
     Possible values are 'text' and 'curses'.
 
 ``interface.chunkselector``
     Select the interface for change recording (e.g. :hg:`commit -i`).
     Possible values are 'text' and 'curses'.
     This config overrides the interface specified by ui.interface.
 
 ``logtemplate``
     Template string for commands that print changesets.
 
 ``merge``
     The conflict resolution program to use during a manual merge.
     For more information on merge tools see :hg:`help merge-tools`.
     For configuring merge tools see the ``[merge-tools]`` section.
 
 ``mergemarkers``
     Sets the merge conflict marker label styling. The ``detailed``
     style uses the ``mergemarkertemplate`` setting to style the labels.
     The ``basic`` style just uses 'local' and 'other' as the marker label.
     One of ``basic`` or ``detailed``.
     (default: ``basic``)
 
 ``mergemarkertemplate``
     The template used to print the commit description next to each conflict
     marker during merge conflicts. See :hg:`help templates` for the template
     format.
 
     Defaults to showing the hash, tags, branches, bookmarks, author, and
     the first line of the commit description.
 
     If you use non-ASCII characters in names for tags, branches, bookmarks,
     authors, and/or commit descriptions, you must pay attention to encodings of
     managed files. At template expansion, non-ASCII characters use the encoding
     specified by the ``--encoding`` global option, ``HGENCODING`` or other
     environment variables that govern your locale. If the encoding of the merge
     markers is different from the encoding of the merged files,
     serious problems may occur.
 
 ``origbackuppath``
     The path to a directory used to store generated .orig files. If the path is
     not a directory, one will be created.
 
 ``patch``
     An optional external tool that ``hg import`` and some extensions
     will use for applying patches. By default Mercurial uses an
     internal patch utility. The external tool must work as the common
     Unix ``patch`` program. In particular, it must accept a ``-p``
     argument to strip patch headers, a ``-d`` argument to specify the
     current directory, a file name to patch, and a patch file to take
     from stdin.
 
     It is possible to specify a patch tool together with extra
     arguments. For example, setting this option to ``patch --merge``
     will use the ``patch`` program with its 2-way merge option.
 
 ``portablefilenames``
     Check for portable filenames. Can be ``warn``, ``ignore`` or ``abort``.
     (default: ``warn``)
 
     ``warn``
       Print a warning message on POSIX platforms, if a file with a non-portable
       filename is added (e.g. a file with a name that can't be created on
       Windows because it contains reserved parts like ``AUX``, reserved
       characters like ``:``, or would cause a case collision with an existing
       file).
 
     ``ignore``
       Don't print a warning.
 
     ``abort``
       The command is aborted.
 
     ``true``
       Alias for ``warn``.
 
     ``false``
       Alias for ``ignore``.
 
     .. container:: windows
 
       On Windows, this configuration option is ignored and the command aborted.
 
 ``quiet``
     Reduce the amount of output printed.
     (default: False)
 
 ``remotecmd``
     Remote command to use for clone/push/pull operations.
     (default: ``hg``)
 
 ``report_untrusted``
     Warn if a ``.hg/hgrc`` file is ignored due to not being owned by a
     trusted user or group.
     (default: True)
 
 ``slash``
     Display paths using a slash (``/``) as the path separator. This
     only makes a difference on systems where the default path
     separator is not the slash character (e.g. Windows uses the
     backslash character (``\``)).
     (default: False)
 
 ``statuscopies``
     Display copies in the status command.
 
 ``ssh``
     Command to use for SSH connections. (default: ``ssh``)
 
 ``strict``
     Require exact command names, instead of allowing unambiguous
     abbreviations. (default: False)
 
 ``style``
     Name of style to use for command output.
 
 ``supportcontact``
     A URL where users should report a Mercurial traceback. Use this if you are a
     large organisation with its own Mercurial deployment process and crash
     reports should be addressed to your internal support.
 
 ``textwidth``
     Maximum width of help text. A longer line generated by ``hg help`` or
     ``hg subcommand --help`` will be broken after white space to get this
     width or the terminal width, whichever comes first.
     A non-positive value will disable this and the terminal width will be
     used. (default: 78)
 
 ``timeout``
     The timeout used when a lock is held (in seconds), a negative value
     means no timeout. (default: 600)
 
 ``traceback``
     Mercurial always prints a traceback when an unknown exception
     occurs. Setting this to True will make Mercurial print a traceback
     on all exceptions, even those recognized by Mercurial (such as
     IOError or MemoryError). (default: False)
 
 ``username``
     The committer of a changeset created when running "commit".
     Typically a person's name and email address, e.g. ``Fred Widget
     <[e-mail]>``. Environment variables in the
     username are expanded.
 
     (default: ``$EMAIL`` or ``username@hostname``. If the username in
     hgrc is empty, e.g. if the system admin set ``username =`` in the
     system hgrc, it has to be specified manually or in a different
     hgrc file)
 
 ``verbose``
     Increase the amount of output printed. (default: False)
 
 
 ``web``
 -------
 
 Web interface configuration. The settings in this section apply to
 both the builtin webserver (started by :hg:`serve`) and the script you
 run through a webserver (``hgweb.cgi`` and the derivatives for FastCGI
 and WSGI).
 
 The Mercurial webserver does no authentication (it does not prompt for
 usernames and passwords to validate *who* users are), but it does do
 authorization (it grants or denies access for *authenticated users*
 based on settings in this section). You must either configure your
 webserver to do authentication for you, or disable the authorization
 checks.
 
 For a quick setup in a trusted environment, e.g., a private LAN, where
 you want it to accept pushes from anybody, you can use the following
 command line::
 
     $ hg --config web.allow_push=* --config web.push_ssl=False serve
 
 Note that this will allow anybody to push anything to the server and
 that this should not be used for public servers.
 
 The full set of options is:
 
 ``accesslog``
     Where to output the access log. (default: stdout)
 
 ``address``
     Interface address to bind to. (default: all)
 
 ``allow_archive``
     List of archive format (bz2, gz, zip) allowed for downloading.
     (default: empty)
 
 ``allowbz2``
     (DEPRECATED) Whether to allow .tar.bz2 downloading of repository
     revisions.
     (default: False)
 
 ``allowgz``
     (DEPRECATED) Whether to allow .tar.gz downloading of repository
     revisions.
     (default: False)
 
 ``allowpull``
     Whether to allow pulling from the repository. (default: True)
 
 ``allow_push``
     Whether to allow pushing to the repository. If empty or not set,
     pushing is not allowed. If the special value ``*``, any remote
     user can push, including unauthenticated users. Otherwise, the
     remote user must have been authenticated, and the authenticated
     user name must be present in this list. The contents of the
     allow_push list are examined after the deny_push list.
 
 ``allow_read``
     If the user has not already been denied repository access due to
     the contents of deny_read, this list determines whether to grant
     repository access to the user. If this list is not empty, and the
     user is unauthenticated or not present in the list, then access is
     denied for the user. If the list is empty or not set, then access
     is permitted to all users by default. Setting allow_read to the
     special value ``*`` is equivalent to it not being set (i.e. access
     is permitted to all users). The contents of the allow_read list are
     examined after the deny_read list.
 
 ``allowzip``
     (DEPRECATED) Whether to allow .zip downloading of repository
     revisions. This feature creates temporary files.
     (default: False)
 
 ``archivesubrepos``
     Whether to recurse into subrepositories when archiving.
     (default: False)
 
 ``baseurl``
     Base URL to use when publishing URLs in other locations, so
     third-party tools like email notification hooks can construct
     URLs. Example: ``http://hgserver/repos/``.
 
 ``cacerts``
     Path to file containing a list of PEM encoded certificate
     authority certificates. Environment variables and ``~user``
     constructs are expanded in the filename. If specified on the
     client, then it will verify the identity of remote HTTPS servers
     with these certificates.
 
     To disable SSL verification temporarily, specify ``--insecure`` from
     command line.
 
     You can use OpenSSL's CA certificate file if your platform has
     one. On most Linux systems this will be
     ``/etc/ssl/certs/ca-certificates.crt``. Otherwise you will have to
     generate this file manually. The form must be as follows::
 
         -----BEGIN CERTIFICATE-----
         ... (certificate in base64 PEM encoding) ...
         -----END CERTIFICATE-----
         -----BEGIN CERTIFICATE-----
         ... (certificate in base64 PEM encoding) ...
         -----END CERTIFICATE-----
 
 ``cache``
     Whether to support caching in hgweb. (default: True)
 
 ``certificate``
     Certificate to use when running :hg:`serve`.
 
 ``collapse``
     With ``descend`` enabled, repositories in subdirectories are shown at
     a single level alongside repositories in the current path. With
     ``collapse`` also enabled, repositories residing at a deeper level than
     the current path are grouped behind navigable directory entries that
     lead to the locations of these repositories. In effect, this setting
     collapses each collection of repositories found within a subdirectory
     into a single entry for that subdirectory. (default: False)
 
 ``comparisoncontext``
     Number of lines of context to show in side-by-side file comparison. If
     negative or the value ``full``, whole files are shown. (default: 5)
 
     This setting can be overridden by a ``context`` request parameter to the
     ``comparison`` command, taking the same values.
 
 ``contact``
     Name or email address of the person in charge of the repository.
     (default: ui.username or ``$EMAIL`` or "unknown" if unset or empty)
 
 ``csp``
     Send a ``Content-Security-Policy`` HTTP header with this value.
 
     The value may contain a special string ``%nonce%``, which will be replaced
     by a randomly-generated one-time use value. If the value contains
     ``%nonce%``, ``web.cache`` will be disabled, as caching undermines the
     one-time property of the nonce. This nonce will also be inserted into
     ``<script>`` elements containing inline JavaScript.
 
     Note: lots of HTML content sent by the server is derived from repository
     data. Please consider the potential for malicious repository data to
     "inject" itself into generated HTML content as part of your security
     threat model.
 
 ``deny_push``
     Whether to deny pushing to the repository. If empty or not set,
     push is not denied. If the special value ``*``, all remote users are
     denied push. Otherwise, unauthenticated users are all denied, and
     any authenticated user name present in this list is also denied. The
     contents of the deny_push list are examined before the allow_push list.
 
 ``deny_read``
     Whether to deny reading/viewing of the repository. If this list is
     not empty, unauthenticated users are all denied, and any
     authenticated user name present in this list is also denied access to
     the repository. If set to the special value ``*``, all remote users
     are denied access (rarely needed ;). If deny_read is empty or not set,
     the determination of repository access depends on the presence and
     content of the allow_read list (see description). If both
     deny_read and allow_read are empty or not set, then access is
     permitted to all users by default. If the repository is being
     served via hgwebdir, denied users will not be able to see it in
     the list of repositories. The contents of the deny_read list have
     priority over (are examined before) the contents of the allow_read
     list.
 
 ``descend``
     hgwebdir indexes will not descend into subdirectories. Only repositories
     directly in the current path will be shown (other repositories are still
     available from the index corresponding to their containing path).
 
 ``description``
     Textual description of the repository's purpose or contents.
     (default: "unknown")
 
 ``encoding``
     Character encoding name. (default: the current locale charset)
     Example: "UTF-8".
 
 ``errorlog``
     Where to output the error log. (default: stderr)
 
 ``guessmime``
     Control MIME types for raw download of file content.
     Set to True to let hgweb guess the content type from the file
     extension. This will serve HTML files as ``text/html`` and might
     allow cross-site scripting attacks when serving untrusted
     repositories. (default: False)
 
 ``hidden``
     Whether to hide the repository in the hgwebdir index.
     (default: False)
 
 ``ipv6``
     Whether to use IPv6. (default: False)
 
 ``labels``
     List of string *labels* associated with the repository.
 
     Labels are exposed as a template keyword and can be used to customize
     output. e.g. the ``index`` template can group or filter repositories
     by labels and the ``summary`` template can display additional content
     if a specific label is present.
 
 ``logoimg``
     File name of the logo image that some templates display on each page.
     The file name is relative to ``staticurl``. That is, the full path to
     the logo image is "staticurl/logoimg".
     If unset, ``hglogo.png`` will be used.
 
 ``logourl``
     Base URL to use for logos. If unset, ``https://mercurial-scm.org/``
     will be used.
 
 ``maxchanges``
     Maximum number of changes to list on the changelog. (default: 10)
 
 ``maxfiles``
     Maximum number of files to list per changeset. (default: 10)
 
 ``maxshortchanges``
     Maximum number of changes to list on the shortlog, graph or filelog
     pages. (default: 60)
 
 ``name``
     Repository name to use in the web interface.
     (default: current working directory)
 
 ``port``
     Port to listen on. (default: 8000)
 
 ``prefix``
     Prefix path to serve from. (default: '' (server root))
 
 ``push_ssl``
     Whether to require that inbound pushes be transported over SSL to
     prevent password sniffing. (default: True)
 
 ``refreshinterval``
     How frequently directory listings re-scan the filesystem for new
     repositories, in seconds. This is relevant when wildcards are used
     to define paths. Depending on how much filesystem traversal is
     required, refreshing may negatively impact performance.
 
     Values less than or equal to 0 always refresh.
     (default: 20)
 
 ``staticurl``
     Base URL to use for static files. If unset, static files (e.g. the
     hgicon.png favicon) will be served by the CGI script itself. Use
     this setting to serve them directly with the HTTP server.
     Example: ``http://hgserver/static/``.
 
 ``stripes``
     How many lines a "zebra stripe" should span in multi-line output.
     Set to 0 to disable. (default: 1)
 
 ``style``
     Which template map style to use. The available options are the names of
     subdirectories in the HTML templates path. (default: ``paper``)
     Example: ``monoblue``.
 
 ``templates``
     Where to find the HTML templates. The default path to the HTML templates
     can be obtained from ``hg debuginstall``.
 
 ``websub``
 ----------
 
 Web substitution filter definition. You can use this section to
 define a set of regular expression substitution patterns which
 let you automatically modify the hgweb server output.
 
 The default hgweb templates only apply these substitution patterns
 on the revision description fields. You can apply them anywhere
 you want when you create your own templates by adding calls to the
 "websub" filter (usually after calling the "escape" filter).
 
 This can be used, for example, to convert issue references to links
 to your issue tracker, or to convert "markdown-like" syntax into
 HTML (see the examples below).
 
 Each entry in this section names a substitution filter.
 The value of each entry defines the substitution expression itself.
 The websub expressions follow the old interhg extension syntax,
 which in turn imitates the Unix sed replacement syntax::
 
     patternname = s/SEARCH_REGEX/REPLACE_EXPRESSION/[i]
 
 You can use any separator other than "/". The final "i" is optional
 and indicates that the search must be case insensitive.
 
 Examples::
 
     [websub]
     issues = s|issue(\d+)|<a href="http://bts.example.org/issue\1">issue\1</a>|i
     italic = s/\b_(\S+)_\b/<i>\1<\/i>/
     bold = s/\*\b(\S+)\b\*/<b>\1<\/b>/
 
 ``worker``
 ----------
 
 Parallel master/worker configuration. We currently perform working
 directory updates in parallel on Unix-like systems, which greatly
 helps performance.
 
 ``numcpus``
     Number of CPUs to use for parallel operations. A zero or
     negative value is treated as ``use the default``.
     (default: 4 or the number of CPUs on the system, whichever is larger)
 
 ``backgroundclose``
     Whether to enable closing file handles on background threads during certain
     operations. Some platforms aren't very efficient at closing file
     handles that have been written or appended to. By performing file closing
     on background threads, file write rate can increase substantially.
     (default: true on Windows, false elsewhere)
 
 ``backgroundcloseminfilecount``
     Minimum number of files required to trigger background file closing.
     Operations not writing this many files won't start background close
     threads.
     (default: 2048)
 
 ``backgroundclosemaxqueue``
     The maximum number of opened file handles waiting to be closed in the
     background. This option only has an effect if ``backgroundclose`` is
     enabled.
     (default: 384)
 
 ``backgroundclosethreadcount``
     Number of threads to process background file closes. Only relevant if
     ``backgroundclose`` is enabled.
     (default: 4)

mercurial/hook.py

@@ -1,266 +1,267
 # hook.py - hook support for mercurial
 #
 # Copyright 2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import os
 import sys
 
 from .i18n import _
 from . import (
     demandimport,
     error,
     extensions,
     pycompat,
     util,
 )
 
 def _pythonhook(ui, repo, htype, hname, funcname, args, throw):
     '''call python hook. hook is callable object, looked up as
     name in python module. if callable returns "true", hook
     fails, else passes. if hook raises exception, treated as
     hook failure. exception propagates if throw is "true".
 
     reason for "true" meaning "hook failed" is so that
     unmodified commands (e.g. mercurial.commands.update) can
     be run as hooks without wrappers to convert return values.'''
 
     if callable(funcname):
         obj = funcname
         funcname = obj.__module__ + "." + obj.__name__
     else:
         d = funcname.rfind('.')
         if d == -1:
             raise error.HookLoadError(
                 _('%s hook is invalid: "%s" not in a module')
                 % (hname, funcname))
         modname = funcname[:d]
         oldpaths = sys.path
         if util.mainfrozen():
             # binary installs require sys.path manipulation
             modpath, modfile = os.path.split(modname)
             if modpath and modfile:
                 sys.path = sys.path[:] + [modpath]
                 modname = modfile
         with demandimport.deactivated():
             try:
                 obj = __import__(modname)
             except (ImportError, SyntaxError):
                 e1 = sys.exc_info()
                 try:
                     # extensions are loaded with hgext_ prefix
                     obj = __import__("hgext_%s" % modname)
                 except (ImportError, SyntaxError):
                     e2 = sys.exc_info()
                     if ui.tracebackflag:
                         ui.warn(_('exception from first failed import '
                                   'attempt:\n'))
                     ui.traceback(e1)
                     if ui.tracebackflag:
                         ui.warn(_('exception from second failed import '
                                   'attempt:\n'))
                     ui.traceback(e2)
 
                     if not ui.tracebackflag:
                         tracebackhint = _(
                             'run with --traceback for stack trace')
                     else:
                         tracebackhint = None
                     raise error.HookLoadError(
                         _('%s hook is invalid: import of "%s" failed') %
                         (hname, modname), hint=tracebackhint)
         sys.path = oldpaths
         try:
             for p in funcname.split('.')[1:]:
                 obj = getattr(obj, p)
         except AttributeError:
             raise error.HookLoadError(
                 _('%s hook is invalid: "%s" is not defined')
                 % (hname, funcname))
         if not callable(obj):
             raise error.HookLoadError(
                 _('%s hook is invalid: "%s" is not callable')
                 % (hname, funcname))
 
     ui.note(_("calling hook %s: %s\n") % (hname, funcname))
     starttime = util.timer()
 
     try:
         r = obj(ui=ui, repo=repo, hooktype=htype, **args)
     except Exception as exc:
         if isinstance(exc, error.Abort):
             ui.warn(_('error: %s hook failed: %s\n') %
                          (hname, exc.args[0]))
         else:
             ui.warn(_('error: %s hook raised an exception: '
                            '%s\n') % (hname, exc))
         if throw:
             raise
         if not ui.tracebackflag:
             ui.warn(_('(run with --traceback for stack trace)\n'))
         ui.traceback()
         return True, True
     finally:
         duration = util.timer() - starttime
         ui.log('pythonhook', 'pythonhook-%s: %s finished in %0.2f seconds\n',
                htype, funcname, duration)
     if r:
         if throw:
             raise error.HookAbort(_('%s hook failed') % hname)
         ui.warn(_('warning: %s hook failed\n') % hname)
     return r, False
 
-def _exthook(ui, repo, name, cmd, args, throw):
+def _exthook(ui, repo, htype, name, cmd, args, throw):
     ui.note(_("running hook %s: %s\n") % (name, cmd))
 
     starttime = util.timer()
     env = {}
 
     # make in-memory changes visible to external process
     if repo is not None:
         tr = repo.currenttransaction()
         repo.dirstate.write(tr)
         if tr and tr.writepending():
             env['HG_PENDING'] = repo.root
+    env['HG_HOOKTYPE'] = htype
 
     for k, v in args.iteritems():
         if callable(v):
             v = v()
         if isinstance(v, dict):
             # make the dictionary element order stable across Python
             # implementations
             v = ('{' +
                  ', '.join('%r: %r' % i for i in sorted(v.iteritems())) +
                  '}')
         env['HG_' + k.upper()] = v
 
     if repo:
         cwd = repo.root
     else:
         cwd = pycompat.getcwd()
     r = ui.system(cmd, environ=env, cwd=cwd, blockedtag='exthook-%s' % (name,))
 
     duration = util.timer() - starttime
     ui.log('exthook', 'exthook-%s: %s finished in %0.2f seconds\n',
            name, cmd, duration)
     if r:
         desc, r = util.explainexit(r)
         if throw:
             raise error.HookAbort(_('%s hook %s') % (name, desc))
         ui.warn(_('warning: %s hook %s\n') % (name, desc))
     return r
 
 # represent an untrusted hook command
 _fromuntrusted = object()
 
 def _allhooks(ui):
     """return a list of (hook-id, cmd) pairs sorted by priority"""
     hooks = _hookitems(ui)
     # Be careful in this section, propagating the real commands from untrusted
     # sources would create a security vulnerability, make sure anything altered
     # in that section uses "_fromuntrusted" as its command.
     untrustedhooks = _hookitems(ui, _untrusted=True)
     for name, value in untrustedhooks.items():
         trustedvalue = hooks.get(name, (None, None, name, _fromuntrusted))
         if value != trustedvalue:
             (lp, lo, lk, lv) = trustedvalue
             hooks[name] = (lp, lo, lk, _fromuntrusted)
     # (end of the security sensitive section)
     return [(k, v) for p, o, k, v in sorted(hooks.values())]
 
 def _hookitems(ui, _untrusted=False):
     """return all hooks items ready to be sorted"""
     hooks = {}
     for name, cmd in ui.configitems('hooks', untrusted=_untrusted):
         if not name.startswith('priority'):
             priority = ui.configint('hooks', 'priority.%s' % name, 0)
             hooks[name] = (-priority, len(hooks), name, cmd)
     return hooks
 
 _redirect = False
 def redirect(state):
     global _redirect
     _redirect = state
 
 def hook(ui, repo, htype, throw=False, **args):
     if not ui.callhooks:
         return False
 
     hooks = []
     for hname, cmd in _allhooks(ui):
         if hname.split('.')[0] == htype and cmd:
             hooks.append((hname, cmd))
 
     res = runhooks(ui, repo, htype, hooks, throw=throw, **args)
     r = False
     for hname, cmd in hooks:
         r = res[hname][0] or r
     return r
 
 def runhooks(ui, repo, htype, hooks, throw=False, **args):
     res = {}
     oldstdout = -1
 
     try:
         for hname, cmd in hooks:
             if oldstdout == -1 and _redirect:
                 try:
                     stdoutno = util.stdout.fileno()
                     stderrno = util.stderr.fileno()
                     # temporarily redirect stdout to stderr, if possible
                     if stdoutno >= 0 and stderrno >= 0:
                         util.stdout.flush()
                         oldstdout = os.dup(stdoutno)
                         os.dup2(stderrno, stdoutno)
                 except (OSError, AttributeError):
                     # files seem to be bogus, give up on redirecting (WSGI, etc)
                     pass
 
             if cmd is _fromuntrusted:
                 if throw:
                     raise error.HookAbort(
                         _('untrusted hook %s not executed') % hname,
                         hint = _("see 'hg help config.trusted'"))
                 ui.warn(_('warning: untrusted hook %s not executed\n') % hname)
                 r = 1
                 raised = False
             elif callable(cmd):
                 r, raised = _pythonhook(ui, repo, htype, hname, cmd, args,
                                         throw)
             elif cmd.startswith('python:'):
                 if cmd.count(':') >= 2:
                     path, cmd = cmd[7:].rsplit(':', 1)
                     path = util.expandpath(path)
                     if repo:
                         path = os.path.join(repo.root, path)
                     try:
                         mod = extensions.loadpath(path, 'hghook.%s' % hname)
                     except Exception:
                         ui.write(_("loading %s hook failed:\n") % hname)
                         raise
                     hookfn = getattr(mod, cmd)
                 else:
                     hookfn = cmd[7:].strip()
                 r, raised = _pythonhook(ui, repo, htype, hname, hookfn, args,
                                         throw)
             else:
-                r = _exthook(ui, repo, hname, cmd, args, throw)
+                r = _exthook(ui, repo, htype, hname, cmd, args, throw)
                 raised = False
 
             res[hname] = r, raised
 
             # The stderr is fully buffered on Windows when connected to a pipe.
             # A forcible flush is required to make small stderr data in the
             # remote side available to the client immediately.
             util.stderr.flush()
     finally:
         if _redirect and oldstdout >= 0:
             util.stdout.flush()  # write hook output to stderr fd
             os.dup2(oldstdout, stdoutno)
             os.close(oldstdout)
 
     return res

tests/test-bundle.t

@@ -1,853 +1,853
 
   $ cat << EOF >> $HGRCPATH
   > [format]
   > usegeneraldelta=yes
   > EOF
 
 Setting up test
 
   $ hg init test
   $ cd test
   $ echo 0 > afile
   $ hg add afile
   $ hg commit -m "0.0"
   $ echo 1 >> afile
   $ hg commit -m "0.1"
   $ echo 2 >> afile
   $ hg commit -m "0.2"
   $ echo 3 >> afile
   $ hg commit -m "0.3"
   $ hg update -C 0
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo 1 >> afile
   $ hg commit -m "1.1"
   created new head
   $ echo 2 >> afile
   $ hg commit -m "1.2"
   $ echo "a line" > fred
   $ echo 3 >> afile
   $ hg add fred
   $ hg commit -m "1.3"
   $ hg mv afile adifferentfile
   $ hg commit -m "1.3m"
   $ hg update -C 3
   1 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ hg mv afile anotherfile
   $ hg commit -m "0.3m"
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   4 files, 9 changesets, 7 total revisions
   $ cd ..
   $ hg init empty
 
 Bundle and phase
 
   $ hg -R test phase --force --secret 0
   $ hg -R test bundle phase.hg empty
   searching for changes
   no changes found (ignored 9 secret changesets)
   [1]
   $ hg -R test phase --draft -r 'head()'
 
 Bundle --all
 
   $ hg -R test bundle --all all.hg
   9 changesets found
 
 Bundle test to full.hg
 
   $ hg -R test bundle full.hg empty
   searching for changes
   9 changesets found
 
 Unbundle full.hg in test
 
   $ hg -R test unbundle full.hg
   adding changesets
   adding manifests
   adding file changes
   added 0 changesets with 0 changes to 4 files
   (run 'hg update' to get a working copy)
 
 Verify empty
 
   $ hg -R empty heads
   [1]
   $ hg -R empty verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   0 files, 0 changesets, 0 total revisions
 
 Pull full.hg into test (using --cwd)
 
   $ hg --cwd test pull ../full.hg
   pulling from ../full.hg
   searching for changes
   no changes found
 
 Verify that there are no leaked temporary files after pull (issue2797)
 
   $ ls test/.hg | grep .hg10un
   [1]
 
 Pull full.hg into empty (using --cwd)
 
   $ hg --cwd empty pull ../full.hg
   pulling from ../full.hg
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 9 changesets with 7 changes to 4 files (+1 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 Rollback empty
 
   $ hg -R empty rollback
   repository tip rolled back to revision -1 (undo pull)
 
 Pull full.hg into empty again (using --cwd)
 
   $ hg --cwd empty pull ../full.hg
   pulling from ../full.hg
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 9 changesets with 7 changes to 4 files (+1 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 Pull full.hg into test (using -R)
 
   $ hg -R test pull full.hg
   pulling from full.hg
   searching for changes
   no changes found
 
 Pull full.hg into empty (using -R)
 
   $ hg -R empty pull full.hg
   pulling from full.hg
   searching for changes
   no changes found
 
 Rollback empty
 
   $ hg -R empty rollback
   repository tip rolled back to revision -1 (undo pull)
 
 Pull full.hg into empty again (using -R)
 
   $ hg -R empty pull full.hg
   pulling from full.hg
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 9 changesets with 7 changes to 4 files (+1 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 Log -R full.hg in fresh empty
 
   $ rm -r empty
   $ hg init empty
   $ cd empty
   $ hg -R bundle://../full.hg log
   changeset:   8:aa35859c02ea
   tag:         tip
   parent:      3:eebf5a27f8ca
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3m
   
   changeset:   7:a6a34bfa0076
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3m
   
   changeset:   6:7373c1169842
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3
   
   changeset:   5:1bb50a9436a7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.2
   
   changeset:   4:095197eb4973
   parent:      0:f9ee2f85a263
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.1
   
   changeset:   3:eebf5a27f8ca
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3
   
   changeset:   2:e38ba6f5b7e0
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.2
   
   changeset:   1:34c2bf6b0626
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.1
   
   changeset:   0:f9ee2f85a263
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.0
   
 Make sure bundlerepo doesn't leak tempfiles (issue2491)
 
   $ ls .hg
   00changelog.i
   cache
   requires
   store
 
 Pull ../full.hg into empty (with hook)
 
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup"
   > EOF
 
 doesn't work (yet ?)
 
 hg -R bundle://../full.hg verify
 
   $ hg pull bundle://../full.hg
   pulling from bundle:../full.hg
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 9 changesets with 7 changes to 4 files (+1 heads)
-  changegroup hook: HG_NODE=f9ee2f85a263049e9ae6d37a0e67e96194ffb735 HG_NODE_LAST=aa35859c02ea8bd48da5da68cd2740ac71afcbaf HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=bundle:../full.hg
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=f9ee2f85a263049e9ae6d37a0e67e96194ffb735 HG_NODE_LAST=aa35859c02ea8bd48da5da68cd2740ac71afcbaf HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=bundle:../full.hg
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 Rollback empty
 
   $ hg rollback
   repository tip rolled back to revision -1 (undo pull)
   $ cd ..
 
 Log -R bundle:empty+full.hg
 
   $ hg -R bundle:empty+full.hg log --template="{rev} "; echo ""
   8 7 6 5 4 3 2 1 0 
 
 Pull full.hg into empty again (using -R; with hook)
 
   $ hg -R empty pull full.hg
   pulling from full.hg
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 9 changesets with 7 changes to 4 files (+1 heads)
-  changegroup hook: HG_NODE=f9ee2f85a263049e9ae6d37a0e67e96194ffb735 HG_NODE_LAST=aa35859c02ea8bd48da5da68cd2740ac71afcbaf HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=bundle:empty+full.hg
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=f9ee2f85a263049e9ae6d37a0e67e96194ffb735 HG_NODE_LAST=aa35859c02ea8bd48da5da68cd2740ac71afcbaf HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=bundle:empty+full.hg
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 Cannot produce streaming clone bundles with "hg bundle"
 
   $ hg -R test bundle -t packed1 packed.hg
   abort: packed bundles cannot be produced by "hg bundle"
   (use 'hg debugcreatestreamclonebundle')
   [255]
 
 packed1 is produced properly
 
   $ hg -R test debugcreatestreamclonebundle packed.hg
   writing 2664 bytes for 6 files
   bundle requirements: generaldelta, revlogv1
 
   $ f -B 64 --size --sha1 --hexdump packed.hg
   packed.hg: size=2827, sha1=9d14cb90c66a21462d915ab33656f38b9deed686
   0000: 48 47 53 31 55 4e 00 00 00 00 00 00 00 06 00 00 |HGS1UN..........|
   0010: 00 00 00 00 0a 68 00 16 67 65 6e 65 72 61 6c 64 |.....h..generald|
   0020: 65 6c 74 61 2c 72 65 76 6c 6f 67 76 31 00 64 61 |elta,revlogv1.da|
   0030: 74 61 2f 61 64 69 66 66 65 72 65 6e 74 66 69 6c |ta/adifferentfil|
 
   $ hg debugbundle --spec packed.hg
   none-packed1;requirements%3Dgeneraldelta%2Crevlogv1
 
 generaldelta requirement is not listed in stream clone bundles unless used
 
   $ hg --config format.usegeneraldelta=false init testnongd
   $ cd testnongd
   $ touch foo
   $ hg -q commit -A -m initial
   $ cd ..
   $ hg -R testnongd debugcreatestreamclonebundle packednongd.hg
   writing 301 bytes for 3 files
   bundle requirements: revlogv1
 
   $ f -B 64 --size --sha1 --hexdump packednongd.hg
   packednongd.hg: size=383, sha1=1d9c230238edd5d38907100b729ba72b1831fe6f
   0000: 48 47 53 31 55 4e 00 00 00 00 00 00 00 03 00 00 |HGS1UN..........|
   0010: 00 00 00 00 01 2d 00 09 72 65 76 6c 6f 67 76 31 |.....-..revlogv1|
   0020: 00 64 61 74 61 2f 66 6f 6f 2e 69 00 36 34 0a 00 |.data/foo.i.64..|
   0030: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
 
   $ hg debugbundle --spec packednongd.hg
   none-packed1;requirements%3Drevlogv1
 
 Unpacking packed1 bundles with "hg unbundle" isn't allowed
 
   $ hg init packed
   $ hg -R packed unbundle packed.hg
   abort: packed bundles cannot be applied with "hg unbundle"
   (use "hg debugapplystreamclonebundle")
   [255]
 
 packed1 can be consumed from debug command
 
 (this also confirms that streamclone-ed changes are visible via
 @filecache properties to in-process procedures before closing
 transaction)
 
   $ cat > $TESTTMP/showtip.py <<EOF
   > from __future__ import absolute_import
   > 
   > def showtip(ui, repo, hooktype, **kwargs):
   >     ui.warn('%s: %s\n' % (hooktype, repo['tip'].hex()[:12]))
   > 
   > def reposetup(ui, repo):
   >     # this confirms (and ensures) that (empty) 00changelog.i
   >     # before streamclone is already cached as repo.changelog
   >     ui.setconfig('hooks', 'pretxnopen.showtip', showtip)
   > 
   >     # this confirms that streamclone-ed changes are visible to
   >     # in-process procedures before closing transaction
   >     ui.setconfig('hooks', 'pretxnclose.showtip', showtip)
   > 
   >     # this confirms that streamclone-ed changes are still visible
   >     # after closing transaction
   >     ui.setconfig('hooks', 'txnclose.showtip', showtip)
   > EOF
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > showtip = $TESTTMP/showtip.py
   > EOF
 
   $ hg -R packed debugapplystreamclonebundle packed.hg
   6 files to transfer, 2.60 KB of data
   pretxnopen: 000000000000
   pretxnclose: aa35859c02ea
   transferred 2.60 KB in *.* seconds (* */sec) (glob)
   txnclose: aa35859c02ea
 
 (for safety, confirm visibility of streamclone-ed changes by another
 process, too)
 
   $ hg -R packed tip -T "{node|short}\n"
   aa35859c02ea
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > showtip = !
   > EOF
 
 Does not work on non-empty repo
 
   $ hg -R packed debugapplystreamclonebundle packed.hg
   abort: cannot apply stream clone bundle on non-empty repo
   [255]
 
 Create partial clones
 
   $ rm -r empty
   $ hg init empty
   $ hg clone -r 3 test partial
   adding changesets
   adding manifests
   adding file changes
   added 4 changesets with 4 changes to 1 files
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg clone partial partial2
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd partial
 
 Log -R full.hg in partial
 
   $ hg -R bundle://../full.hg log -T phases
   changeset:   8:aa35859c02ea
   tag:         tip
   phase:       draft
   parent:      3:eebf5a27f8ca
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3m
   
   changeset:   7:a6a34bfa0076
   phase:       draft
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3m
   
   changeset:   6:7373c1169842
   phase:       draft
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3
   
   changeset:   5:1bb50a9436a7
   phase:       draft
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.2
   
   changeset:   4:095197eb4973
   phase:       draft
   parent:      0:f9ee2f85a263
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.1
   
   changeset:   3:eebf5a27f8ca
   phase:       public
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3
   
   changeset:   2:e38ba6f5b7e0
   phase:       public
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.2
   
   changeset:   1:34c2bf6b0626
   phase:       public
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.1
   
   changeset:   0:f9ee2f85a263
   phase:       public
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.0
   
 
 Incoming full.hg in partial
 
   $ hg incoming bundle://../full.hg
   comparing with bundle:../full.hg
   searching for changes
   changeset:   4:095197eb4973
   parent:      0:f9ee2f85a263
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.1
   
   changeset:   5:1bb50a9436a7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.2
   
   changeset:   6:7373c1169842
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3
   
   changeset:   7:a6a34bfa0076
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3m
   
   changeset:   8:aa35859c02ea
   tag:         tip
   parent:      3:eebf5a27f8ca
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3m
   
 
 Outgoing -R full.hg vs partial2 in partial
 
   $ hg -R bundle://../full.hg outgoing ../partial2
   comparing with ../partial2
   searching for changes
   changeset:   4:095197eb4973
   parent:      0:f9ee2f85a263
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.1
   
   changeset:   5:1bb50a9436a7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.2
   
   changeset:   6:7373c1169842
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3
   
   changeset:   7:a6a34bfa0076
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3m
   
   changeset:   8:aa35859c02ea
   tag:         tip
   parent:      3:eebf5a27f8ca
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3m
   
 
 Outgoing -R does-not-exist.hg vs partial2 in partial
 
   $ hg -R bundle://../does-not-exist.hg outgoing ../partial2
   abort: *../does-not-exist.hg* (glob)
   [255]
   $ cd ..
 
 hide outer repo
   $ hg init
 
 Direct clone from bundle (all-history)
 
   $ hg clone full.hg full-clone
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 9 changesets with 7 changes to 4 files (+1 heads)
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R full-clone heads
   changeset:   8:aa35859c02ea
   tag:         tip
   parent:      3:eebf5a27f8ca
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3m
   
   changeset:   7:a6a34bfa0076
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1.3m
   
   $ rm -r full-clone
 
 When cloning from a non-copiable repository into '', do not
 recurse infinitely (issue2528)
 
   $ hg clone full.hg ''
   abort: empty destination path is not valid
   [255]
 
 test for https://bz.mercurial-scm.org/216
 
 Unbundle incremental bundles into fresh empty in one go
 
   $ rm -r empty
   $ hg init empty
   $ hg -R test bundle --base null -r 0 ../0.hg
   1 changesets found
   $ hg -R test bundle --base 0    -r 1 ../1.hg
   1 changesets found
   $ hg -R empty unbundle -u ../0.hg ../1.hg
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 View full contents of the bundle
   $ hg -R test bundle --base null -r 3  ../partial.hg
   4 changesets found
   $ cd test
   $ hg -R ../../partial.hg log -r "bundle()"
   changeset:   0:f9ee2f85a263
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.0
   
   changeset:   1:34c2bf6b0626
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.1
   
   changeset:   2:e38ba6f5b7e0
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.2
   
   changeset:   3:eebf5a27f8ca
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0.3
   
   $ cd ..
 
 test for 540d1059c802
 
 test for 540d1059c802
 
   $ hg init orig
   $ cd orig
   $ echo foo > foo
   $ hg add foo
   $ hg ci -m 'add foo'
 
   $ hg clone . ../copy
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg tag foo
 
   $ cd ../copy
   $ echo >> foo
   $ hg ci -m 'change foo'
   $ hg bundle ../bundle.hg ../orig
   searching for changes
   1 changesets found
 
   $ cd ../orig
   $ hg incoming ../bundle.hg
   comparing with ../bundle.hg
   searching for changes
   changeset:   2:ed1b79f46b9a
   tag:         tip
   parent:      0:bbd179dfa0a7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     change foo
   
   $ cd ..
 
 test bundle with # in the filename (issue2154):
 
   $ cp bundle.hg 'test#bundle.hg'
   $ cd orig
   $ hg incoming '../test#bundle.hg'
   comparing with ../test
   abort: unknown revision 'bundle.hg'!
   [255]
 
 note that percent encoding is not handled:
 
   $ hg incoming ../test%23bundle.hg
   abort: repository ../test%23bundle.hg not found!
   [255]
   $ cd ..
 
 test to bundle revisions on the newly created branch (issue3828):
 
   $ hg -q clone -U test test-clone
   $ cd test
 
   $ hg -q branch foo
   $ hg commit -m "create foo branch"
   $ hg -q outgoing ../test-clone
   9:b4f5acb1ee27
   $ hg -q bundle --branch foo foo.hg ../test-clone
   $ hg -R foo.hg -q log -r "bundle()"
   9:b4f5acb1ee27
 
   $ cd ..
 
 test for https://bz.mercurial-scm.org/1144
 
 test that verify bundle does not traceback
 
 partial history bundle, fails w/ unknown parent
 
   $ hg -R bundle.hg verify
   abort: 00changelog.i@bbd179dfa0a7: unknown parent!
   [255]
 
 full history bundle, refuses to verify non-local repo
 
   $ hg -R all.hg verify
   abort: cannot verify bundle or remote repos
   [255]
 
 but, regular verify must continue to work
 
   $ hg -R orig verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 2 changesets, 2 total revisions
 
 diff against bundle
 
   $ hg init b
   $ cd b
   $ hg -R ../all.hg diff -r tip
   diff -r aa35859c02ea anotherfile
   --- a/anotherfile	Thu Jan 01 00:00:00 1970 +0000
   +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,4 +0,0 @@
   -0
   -1
   -2
   -3
   $ cd ..
 
 bundle single branch
 
   $ hg init branchy
   $ cd branchy
   $ echo a >a
   $ echo x >x
   $ hg ci -Ama
   adding a
   adding x
   $ echo c >c
   $ echo xx >x
   $ hg ci -Amc
   adding c
   $ echo c1 >c1
   $ hg ci -Amc1
   adding c1
   $ hg up 0
   1 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ echo b >b
   $ hg ci -Amb
   adding b
   created new head
   $ echo b1 >b1
   $ echo xx >x
   $ hg ci -Amb1
   adding b1
   $ hg clone -q -r2 . part
 
 == bundling via incoming
 
   $ hg in -R part --bundle incoming.hg --template "{node}\n" .
   comparing with .
   searching for changes
   1a38c1b849e8b70c756d2d80b0b9a3ac0b7ea11a
   057f4db07f61970e1c11e83be79e9d08adc4dc31
 
 == bundling
 
   $ hg bundle bundle.hg part --debug --config progress.debug=true
   query 1; heads
   searching for changes
   all remote heads known locally
   2 changesets found
   list of changesets:
   1a38c1b849e8b70c756d2d80b0b9a3ac0b7ea11a
   057f4db07f61970e1c11e83be79e9d08adc4dc31
   bundle2-output-bundle: "HG20", (1 params) 1 parts total
   bundle2-output-part: "changegroup" (params: 1 mandatory 1 advisory) streamed payload
   bundling: 1/2 changesets (50.00%)
   bundling: 2/2 changesets (100.00%)
   bundling: 1/2 manifests (50.00%)
   bundling: 2/2 manifests (100.00%)
   bundling: b 1/3 files (33.33%)
   bundling: b1 2/3 files (66.67%)
   bundling: x 3/3 files (100.00%)
 
 == Test for issue3441
 
   $ hg clone -q -r0 . part2
   $ hg -q -R part2 pull bundle.hg
   $ hg -R part2 verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   4 files, 3 changesets, 5 total revisions
 
 == Test bundling no commits
 
   $ hg bundle -r 'public()' no-output.hg
   abort: no commits to bundle
   [255]
 
   $ cd ..
 
 When user merges to the revision existing only in the bundle,
 it should show warning that second parent of the working
 directory does not exist
 
   $ hg init update2bundled
   $ cd update2bundled
   $ cat <<EOF >> .hg/hgrc
   > [extensions]
   > strip =
   > EOF
   $ echo "aaa" >> a
   $ hg commit -A -m 0
   adding a
   $ echo "bbb" >> b
   $ hg commit -A -m 1
   adding b
   $ echo "ccc" >> c
   $ hg commit -A -m 2
   adding c
   $ hg update -r 1
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo "ddd" >> d
   $ hg commit -A -m 3
   adding d
   created new head
   $ hg update -r 2
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg log -G
   o  changeset:   3:8bd3e1f196af
   |  tag:         tip
   |  parent:      1:a01eca7af26d
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     3
   |
   | @  changeset:   2:4652c276ac4f
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     2
   |
   o  changeset:   1:a01eca7af26d
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     1
   |
   o  changeset:   0:4fe08cd4693e
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     0
   
   $ hg bundle --base 1 -r 3 ../update2bundled.hg
   1 changesets found
   $ hg strip -r 3
   saved backup bundle to $TESTTMP/update2bundled/.hg/strip-backup/8bd3e1f196af-017e56d8-backup.hg (glob)
   $ hg merge -R ../update2bundled.hg -r 3
   setting parent to node 8bd3e1f196af289b2b121be08031e76d7ae92098 that only exists in the bundle
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
 
 When user updates to the revision existing only in the bundle,
 it should show warning
 
   $ hg update -R ../update2bundled.hg --clean -r 3
   setting parent to node 8bd3e1f196af289b2b121be08031e76d7ae92098 that only exists in the bundle
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
 
 When user updates to the revision existing in the local repository
 the warning shouldn't be emitted
 
   $ hg update -R ../update2bundled.hg -r 0
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved

tests/test-bundle2-exchange.t

@@ -1,1136 +1,1136
 Test exchange of common information using bundle2
 
 
   $ getmainid() {
   >    hg -R main log --template '{node}\n' --rev "$1"
   > }
 
 enable obsolescence
 
   $ cp $HGRCPATH $TESTTMP/hgrc.orig
   $ cat > $TESTTMP/bundle2-pushkey-hook.sh << EOF
   > echo pushkey: lock state after \"\$HG_NAMESPACE\"
   > hg debuglock
   > EOF
 
   $ cat >> $HGRCPATH << EOF
   > [experimental]
   > evolution=createmarkers,exchange
   > bundle2-output-capture=True
   > [ui]
   > ssh=python "$TESTDIR/dummyssh"
   > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline}
   > [web]
   > push_ssl = false
   > allow_push = *
   > [phases]
   > publish=False
   > [hooks]
   > pretxnclose.tip = hg log -r tip -T "pre-close-tip:{node|short} {phase} {bookmarks}\n"
   > txnclose.tip = hg log -r tip -T "postclose-tip:{node|short} {phase} {bookmarks}\n"
   > txnclose.env = sh -c  "HG_LOCAL= printenv.py txnclose"
   > pushkey= sh "$TESTTMP/bundle2-pushkey-hook.sh"
   > EOF
 
 The extension requires a repo (currently unused)
 
   $ hg init main
   $ cd main
   $ touch a
   $ hg add a
   $ hg commit -m 'a'
   pre-close-tip:3903775176ed draft 
   postclose-tip:3903775176ed draft 
-  txnclose hook: HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  txnclose hook: HG_HOOKTYPE=txnclose HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
 
   $ hg unbundle $TESTDIR/bundles/rebase.hg
   adding changesets
   adding manifests
   adding file changes
   added 8 changesets with 7 changes to 7 files (+3 heads)
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_NODE=cd010b8cd998f3981a5a8115f94f8da4ab506089 HG_NODE_LAST=02de42196ebee42ef284b6780a87cdc96e8eaab6 HG_PHASES_MOVED=1 HG_SOURCE=unbundle HG_TXNID=TXN:$ID$ HG_TXNNAME=unbundle
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NODE=cd010b8cd998f3981a5a8115f94f8da4ab506089 HG_NODE_LAST=02de42196ebee42ef284b6780a87cdc96e8eaab6 HG_PHASES_MOVED=1 HG_SOURCE=unbundle HG_TXNID=TXN:$ID$ HG_TXNNAME=unbundle
   bundle:*/tests/bundles/rebase.hg HG_URL=bundle:*/tests/bundles/rebase.hg (glob)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
   $ cd ..
 
 Real world exchange
 =====================
 
 Add more obsolescence information
 
   $ hg -R main debugobsolete -d '0 0' 1111111111111111111111111111111111111111 `getmainid 9520eea781bc`
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
   $ hg -R main debugobsolete -d '0 0' 2222222222222222222222222222222222222222 `getmainid 24b6387c8c8c`
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
 
 clone --pull
 
   $ hg -R main phase --public cd010b8cd998
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
+  txnclose hook: HG_HOOKTYPE=txnclose HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
   $ hg clone main other --pull --rev 9520eea781bc
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files
   1 new obsolescence markers
   pre-close-tip:9520eea781bc draft 
   postclose-tip:9520eea781bc draft 
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_NODE=cd010b8cd998f3981a5a8115f94f8da4ab506089 HG_NODE_LAST=9520eea781bcca16c1e15acc0ba14335a0e8e5ba HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_NODE=cd010b8cd998f3981a5a8115f94f8da4ab506089 HG_NODE_LAST=9520eea781bcca16c1e15acc0ba14335a0e8e5ba HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
   file:/*/$TESTTMP/main HG_URL=file:$TESTTMP/main (glob)
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R other log -G
   @  1:9520eea781bc draft Nicolas Dumazet <[e-mail]>  E
   |
   o  0:cd010b8cd998 public Nicolas Dumazet <[e-mail]>  A
   
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 pull
 
   $ hg -R main phase --public 9520eea781bc
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
+  txnclose hook: HG_HOOKTYPE=txnclose HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
   $ hg -R other pull -r 24b6387c8c8c
   pulling from $TESTTMP/main (glob)
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   1 new obsolescence markers
   pre-close-tip:24b6387c8c8c draft 
   postclose-tip:24b6387c8c8c draft 
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_NODE=24b6387c8c8cae37178880f3fa95ded3cb1cf785 HG_NODE_LAST=24b6387c8c8cae37178880f3fa95ded3cb1cf785 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_NODE=24b6387c8c8cae37178880f3fa95ded3cb1cf785 HG_NODE_LAST=24b6387c8c8cae37178880f3fa95ded3cb1cf785 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
   file:/*/$TESTTMP/main HG_URL=file:$TESTTMP/main (glob)
   (run 'hg heads' to see heads, 'hg merge' to merge)
   $ hg -R other log -G
   o  2:24b6387c8c8c draft Nicolas Dumazet <[e-mail]>  F
   |
   | @  1:9520eea781bc draft Nicolas Dumazet <[e-mail]>  E
   |/
   o  0:cd010b8cd998 public Nicolas Dumazet <[e-mail]>  A
   
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 pull empty (with phase movement)
 
   $ hg -R main phase --public 24b6387c8c8c
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
+  txnclose hook: HG_HOOKTYPE=txnclose HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
   $ hg -R other pull -r 24b6387c8c8c
   pulling from $TESTTMP/main (glob)
   no changes found
   pre-close-tip:24b6387c8c8c public 
   postclose-tip:24b6387c8c8c public 
-  txnclose hook: HG_NEW_OBSMARKERS=0 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=0 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
   file:/*/$TESTTMP/main HG_URL=file:$TESTTMP/main (glob)
   $ hg -R other log -G
   o  2:24b6387c8c8c public Nicolas Dumazet <[e-mail]>  F
   |
   | @  1:9520eea781bc draft Nicolas Dumazet <[e-mail]>  E
   |/
   o  0:cd010b8cd998 public Nicolas Dumazet <[e-mail]>  A
   
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 pull empty
 
   $ hg -R other pull -r 24b6387c8c8c
   pulling from $TESTTMP/main (glob)
   no changes found
   pre-close-tip:24b6387c8c8c public 
   postclose-tip:24b6387c8c8c public 
-  txnclose hook: HG_NEW_OBSMARKERS=0 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=0 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
   file:/*/$TESTTMP/main HG_URL=file:$TESTTMP/main (glob)
   $ hg -R other log -G
   o  2:24b6387c8c8c public Nicolas Dumazet <[e-mail]>  F
   |
   | @  1:9520eea781bc draft Nicolas Dumazet <[e-mail]>  E
   |/
   o  0:cd010b8cd998 public Nicolas Dumazet <[e-mail]>  A
   
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 add extra data to test their exchange during push
 
   $ hg -R main bookmark --rev eea13746799a book_eea1
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R main debugobsolete -d '0 0' 3333333333333333333333333333333333333333 `getmainid eea13746799a`
   pre-close-tip:02de42196ebe draft 
   postclose-tip:02de42196ebe draft 
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
   $ hg -R main bookmark --rev 02de42196ebe book_02de
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R main debugobsolete -d '0 0' 4444444444444444444444444444444444444444 `getmainid 02de42196ebe`
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
   $ hg -R main bookmark --rev 42ccdea3bb16 book_42cc
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R main debugobsolete -d '0 0' 5555555555555555555555555555555555555555 `getmainid 42ccdea3bb16`
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
   $ hg -R main bookmark --rev 5fddd98957c8 book_5fdd
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R main debugobsolete -d '0 0' 6666666666666666666666666666666666666666 `getmainid 5fddd98957c8`
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
   $ hg -R main bookmark --rev 32af7686d403 book_32af
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R main debugobsolete -d '0 0' 7777777777777777777777777777777777777777 `getmainid 32af7686d403`
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
+  txnclose hook: HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=debugobsolete
 
   $ hg -R other bookmark --rev cd010b8cd998 book_eea1
   pre-close-tip:24b6387c8c8c public 
   postclose-tip:24b6387c8c8c public 
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R other bookmark --rev cd010b8cd998 book_02de
   pre-close-tip:24b6387c8c8c public 
   postclose-tip:24b6387c8c8c public 
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R other bookmark --rev cd010b8cd998 book_42cc
   pre-close-tip:24b6387c8c8c public 
   postclose-tip:24b6387c8c8c public 
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R other bookmark --rev cd010b8cd998 book_5fdd
   pre-close-tip:24b6387c8c8c public 
   postclose-tip:24b6387c8c8c public 
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ hg -R other bookmark --rev cd010b8cd998 book_32af
   pre-close-tip:24b6387c8c8c public 
   postclose-tip:24b6387c8c8c public 
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
 
   $ hg -R main phase --public eea13746799a
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
+  txnclose hook: HG_HOOKTYPE=txnclose HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
 
 push
   $ hg -R main push other --rev eea13746799a --bookmark book_eea1
   pushing to other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 0 changes to 0 files (-1 heads)
   remote: 1 new obsolescence markers
   remote: pre-close-tip:eea13746799a public book_eea1
   remote: pushkey: lock state after "phases"
   remote: lock:  free
   remote: wlock: free
   remote: pushkey: lock state after "bookmarks"
   remote: lock:  free
   remote: wlock: free
   remote: postclose-tip:eea13746799a public book_eea1
-  remote: txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_NEW_OBSMARKERS=1 HG_NODE=eea13746799a9e0bfd88f29d3c2e9dc9389f524f HG_NODE_LAST=eea13746799a9e0bfd88f29d3c2e9dc9389f524f HG_PHASES_MOVED=1 HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_TXNNAME=push HG_URL=file:$TESTTMP/other
+  remote: txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_NODE=eea13746799a9e0bfd88f29d3c2e9dc9389f524f HG_NODE_LAST=eea13746799a9e0bfd88f29d3c2e9dc9389f524f HG_PHASES_MOVED=1 HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_TXNNAME=push HG_URL=file:$TESTTMP/other
   updating bookmark book_eea1
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_SOURCE=push-response HG_TXNID=TXN:$ID$ HG_TXNNAME=push-response
+  txnclose hook: HG_HOOKTYPE=txnclose HG_SOURCE=push-response HG_TXNID=TXN:$ID$ HG_TXNNAME=push-response
   file:/*/$TESTTMP/other HG_URL=file:$TESTTMP/other (glob)
   $ hg -R other log -G
   o    3:eea13746799a public Nicolas Dumazet <[e-mail]> book_eea1 G
   |\
   | o  2:24b6387c8c8c public Nicolas Dumazet <[e-mail]>  F
   | |
   @ |  1:9520eea781bc public Nicolas Dumazet <[e-mail]>  E
   |/
   o  0:cd010b8cd998 public Nicolas Dumazet <[e-mail]> book_02de book_32af book_42cc book_5fdd A
   
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   3333333333333333333333333333333333333333 eea13746799a9e0bfd88f29d3c2e9dc9389f524f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 pull over ssh
 
   $ hg -R other pull ssh://user@dummy/main -r 02de42196ebe --bookmark book_02de
   pulling from ssh://user@dummy/main
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   1 new obsolescence markers
   updating bookmark book_02de
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_NEW_OBSMARKERS=1 HG_NODE=02de42196ebee42ef284b6780a87cdc96e8eaab6 HG_NODE_LAST=02de42196ebee42ef284b6780a87cdc96e8eaab6 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_NODE=02de42196ebee42ef284b6780a87cdc96e8eaab6 HG_NODE_LAST=02de42196ebee42ef284b6780a87cdc96e8eaab6 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
   ssh://user@dummy/main HG_URL=ssh://user@dummy/main
   (run 'hg heads' to see heads, 'hg merge' to merge)
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   3333333333333333333333333333333333333333 eea13746799a9e0bfd88f29d3c2e9dc9389f524f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   4444444444444444444444444444444444444444 02de42196ebee42ef284b6780a87cdc96e8eaab6 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 pull over http
 
   $ hg serve -R main -p $HGPORT -d --pid-file=main.pid -E main-error.log
   $ cat main.pid >> $DAEMON_PIDS
 
   $ hg -R other pull http://localhost:$HGPORT/ -r 42ccdea3bb16 --bookmark book_42cc
   pulling from http://localhost:$HGPORT/
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   1 new obsolescence markers
   updating bookmark book_42cc
   pre-close-tip:42ccdea3bb16 draft book_42cc
   postclose-tip:42ccdea3bb16 draft book_42cc
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_NEW_OBSMARKERS=1 HG_NODE=42ccdea3bb16d28e1848c95fe2e44c000f3f21b1 HG_NODE_LAST=42ccdea3bb16d28e1848c95fe2e44c000f3f21b1 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_NODE=42ccdea3bb16d28e1848c95fe2e44c000f3f21b1 HG_NODE_LAST=42ccdea3bb16d28e1848c95fe2e44c000f3f21b1 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull
   http://localhost:$HGPORT/ HG_URL=http://localhost:$HGPORT/
   (run 'hg heads .' to see heads, 'hg merge' to merge)
   $ cat main-error.log
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   3333333333333333333333333333333333333333 eea13746799a9e0bfd88f29d3c2e9dc9389f524f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   4444444444444444444444444444444444444444 02de42196ebee42ef284b6780a87cdc96e8eaab6 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   5555555555555555555555555555555555555555 42ccdea3bb16d28e1848c95fe2e44c000f3f21b1 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 push over ssh
 
   $ hg -R main push ssh://user@dummy/other -r 5fddd98957c8 --bookmark book_5fdd
   pushing to ssh://user@dummy/other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: 1 new obsolescence markers
   remote: pre-close-tip:5fddd98957c8 draft book_5fdd
   remote: pushkey: lock state after "bookmarks"
   remote: lock:  free
   remote: wlock: free
   remote: postclose-tip:5fddd98957c8 draft book_5fdd
-  remote: txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_NEW_OBSMARKERS=1 HG_NODE=5fddd98957c8a54a4d436dfe1da9d87f21a1b97b HG_NODE_LAST=5fddd98957c8a54a4d436dfe1da9d87f21a1b97b HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_TXNNAME=serve HG_URL=remote:ssh:$LOCALIP
+  remote: txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_NODE=5fddd98957c8a54a4d436dfe1da9d87f21a1b97b HG_NODE_LAST=5fddd98957c8a54a4d436dfe1da9d87f21a1b97b HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_TXNNAME=serve HG_URL=remote:ssh:$LOCALIP
   updating bookmark book_5fdd
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_SOURCE=push-response HG_TXNID=TXN:$ID$ HG_TXNNAME=push-response
+  txnclose hook: HG_HOOKTYPE=txnclose HG_SOURCE=push-response HG_TXNID=TXN:$ID$ HG_TXNNAME=push-response
   ssh://user@dummy/other HG_URL=ssh://user@dummy/other
   $ hg -R other log -G
   o  6:5fddd98957c8 draft Nicolas Dumazet <[e-mail]> book_5fdd C
   |
   o  5:42ccdea3bb16 draft Nicolas Dumazet <[e-mail]> book_42cc B
   |
   | o  4:02de42196ebe draft Nicolas Dumazet <[e-mail]> book_02de H
   | |
   | | o  3:eea13746799a public Nicolas Dumazet <[e-mail]> book_eea1 G
   | |/|
   | o |  2:24b6387c8c8c public Nicolas Dumazet <[e-mail]>  F
   |/ /
   | @  1:9520eea781bc public Nicolas Dumazet <[e-mail]>  E
   |/
   o  0:cd010b8cd998 public Nicolas Dumazet <[e-mail]> book_32af A
   
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   3333333333333333333333333333333333333333 eea13746799a9e0bfd88f29d3c2e9dc9389f524f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   4444444444444444444444444444444444444444 02de42196ebee42ef284b6780a87cdc96e8eaab6 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   5555555555555555555555555555555555555555 42ccdea3bb16d28e1848c95fe2e44c000f3f21b1 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   6666666666666666666666666666666666666666 5fddd98957c8a54a4d436dfe1da9d87f21a1b97b 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 push over http
 
   $ hg serve -R other -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
   $ hg -R main phase --public 32af7686d403
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
+  txnclose hook: HG_HOOKTYPE=txnclose HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=phase
   $ hg -R main push http://localhost:$HGPORT2/ -r 32af7686d403 --bookmark book_32af
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: 1 new obsolescence markers
   remote: pre-close-tip:32af7686d403 public book_32af
   remote: pushkey: lock state after "phases"
   remote: lock:  free
   remote: wlock: free
   remote: pushkey: lock state after "bookmarks"
   remote: lock:  free
   remote: wlock: free
   remote: postclose-tip:32af7686d403 public book_32af
-  remote: txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_NEW_OBSMARKERS=1 HG_NODE=32af7686d403cf45b5d95f2d70cebea587ac806a HG_NODE_LAST=32af7686d403cf45b5d95f2d70cebea587ac806a HG_PHASES_MOVED=1 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_TXNNAME=serve HG_URL=remote:http:$LOCALIP:
+  remote: txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_HOOKTYPE=txnclose HG_NEW_OBSMARKERS=1 HG_NODE=32af7686d403cf45b5d95f2d70cebea587ac806a HG_NODE_LAST=32af7686d403cf45b5d95f2d70cebea587ac806a HG_PHASES_MOVED=1 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_TXNNAME=serve HG_URL=remote:http:$LOCALIP:
   updating bookmark book_32af
   pre-close-tip:02de42196ebe draft book_02de
   postclose-tip:02de42196ebe draft book_02de
-  txnclose hook: HG_SOURCE=push-response HG_TXNID=TXN:$ID$ HG_TXNNAME=push-response
+  txnclose hook: HG_HOOKTYPE=txnclose HG_SOURCE=push-response HG_TXNID=TXN:$ID$ HG_TXNNAME=push-response
   http://localhost:$HGPORT2/ HG_URL=http://localhost:$HGPORT2/
   $ cat other-error.log
 
 Check final content.
 
   $ hg -R other log -G
   o  7:32af7686d403 public Nicolas Dumazet <[e-mail]> book_32af D
   |
   o  6:5fddd98957c8 public Nicolas Dumazet <[e-mail]> book_5fdd C
   |
   o  5:42ccdea3bb16 public Nicolas Dumazet <[e-mail]> book_42cc B
   |
   | o  4:02de42196ebe draft Nicolas Dumazet <[e-mail]> book_02de H
   | |
   | | o  3:eea13746799a public Nicolas Dumazet <[e-mail]> book_eea1 G
   | |/|
   | o |  2:24b6387c8c8c public Nicolas Dumazet <[e-mail]>  F
   |/ /
   | @  1:9520eea781bc public Nicolas Dumazet <[e-mail]>  E
   |/
   o  0:cd010b8cd998 public Nicolas Dumazet <[e-mail]>  A
   
   $ hg -R other debugobsolete
   1111111111111111111111111111111111111111 9520eea781bcca16c1e15acc0ba14335a0e8e5ba 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   2222222222222222222222222222222222222222 24b6387c8c8cae37178880f3fa95ded3cb1cf785 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   3333333333333333333333333333333333333333 eea13746799a9e0bfd88f29d3c2e9dc9389f524f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   4444444444444444444444444444444444444444 02de42196ebee42ef284b6780a87cdc96e8eaab6 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   5555555555555555555555555555555555555555 42ccdea3bb16d28e1848c95fe2e44c000f3f21b1 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   6666666666666666666666666666666666666666 5fddd98957c8a54a4d436dfe1da9d87f21a1b97b 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
   7777777777777777777777777777777777777777 32af7686d403cf45b5d95f2d70cebea587ac806a 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
 
 (check that no 'pending' files remain)
 
   $ ls -1 other/.hg/bookmarks*
   other/.hg/bookmarks
   $ ls -1 other/.hg/store/phaseroots*
   other/.hg/store/phaseroots
   $ ls -1 other/.hg/store/00changelog.i*
   other/.hg/store/00changelog.i
 
 Error Handling
 ==============
 
 Check that errors are properly returned to the client during push.
 
 Setting up
 
   $ cat > failpush.py << EOF
   > """A small extension that makes push fails when using bundle2
   > 
   > used to test error handling in bundle2
   > """
   > 
   > from mercurial import error
   > from mercurial import bundle2
   > from mercurial import exchange
   > from mercurial import extensions
   > 
   > def _pushbundle2failpart(pushop, bundler):
   >     reason = pushop.ui.config('failpush', 'reason', None)
   >     part = None
   >     if reason == 'abort':
   >         bundler.newpart('test:abort')
   >     if reason == 'unknown':
   >         bundler.newpart('test:unknown')
   >     if reason == 'race':
   >         # 20 Bytes of crap
   >         bundler.newpart('check:heads', data='01234567890123456789')
   > 
   > @bundle2.parthandler("test:abort")
   > def handleabort(op, part):
   >     raise error.Abort('Abandon ship!', hint="don't panic")
   > 
   > def uisetup(ui):
   >     exchange.b2partsgenmapping['failpart'] = _pushbundle2failpart
   >     exchange.b2partsgenorder.insert(0, 'failpart')
   > 
   > EOF
 
   $ cd main
   $ hg up tip
   3 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo 'I' > I
   $ hg add I
   $ hg ci -m 'I'
   pre-close-tip:e7ec4e813ba6 draft 
   postclose-tip:e7ec4e813ba6 draft 
-  txnclose hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  txnclose hook: HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
   $ hg id
   e7ec4e813ba6 tip
   $ cd ..
 
   $ cat << EOF >> $HGRCPATH
   > [extensions]
   > failpush=$TESTTMP/failpush.py
   > EOF
 
   $ killdaemons.py
   $ hg serve -R other -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
 Doing the actual push: Abort error
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason = abort
   > EOF
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   abort: Abandon ship!
   (don't panic)
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   remote: Abandon ship!
   remote: (don't panic)
   abort: push failed on remote
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: Abandon ship!
   remote: (don't panic)
   abort: push failed on remote
   [255]
 
 
 Doing the actual push: unknown mandatory parts
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason = unknown
   > EOF
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   abort: missing support for test:unknown
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   abort: missing support for test:unknown
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   abort: missing support for test:unknown
   [255]
 
 Doing the actual push: race
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason = race
   > EOF
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   abort: push failed:
   'repository changed while pushing - please try again'
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   abort: push failed:
   'repository changed while pushing - please try again'
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   abort: push failed:
   'repository changed while pushing - please try again'
   [255]
 
 Doing the actual push: hook abort
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason =
   > [hooks]
   > pretxnclose.failpush = sh -c "echo 'You shall not pass!'; false"
   > txnabort.failpush = sh -c "echo 'Cleaning up the mess...'"
   > EOF
 
   $ killdaemons.py
   $ hg serve -R other -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: pre-close-tip:e7ec4e813ba6 draft 
   remote: You shall not pass!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   abort: pretxnclose.failpush hook exited with status 1
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: pre-close-tip:e7ec4e813ba6 draft 
   remote: You shall not pass!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pretxnclose.failpush hook exited with status 1
   abort: push failed on remote
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: pre-close-tip:e7ec4e813ba6 draft 
   remote: You shall not pass!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pretxnclose.failpush hook exited with status 1
   abort: push failed on remote
   [255]
 
 (check that no 'pending' files remain)
 
   $ ls -1 other/.hg/bookmarks*
   other/.hg/bookmarks
   $ ls -1 other/.hg/store/phaseroots*
   other/.hg/store/phaseroots
   $ ls -1 other/.hg/store/00changelog.i*
   other/.hg/store/00changelog.i
 
 Check error from hook during the unbundling process itself
 
   $ cat << EOF >> $HGRCPATH
   > pretxnchangegroup = sh -c "echo 'Fail early!'; false"
   > EOF
   $ killdaemons.py # reload http config
   $ hg serve -R other -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: Fail early!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   abort: pretxnchangegroup hook exited with status 1
   [255]
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: Fail early!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pretxnchangegroup hook exited with status 1
   abort: push failed on remote
   [255]
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: Fail early!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pretxnchangegroup hook exited with status 1
   abort: push failed on remote
   [255]
 
 Check output capture control.
 
 (should be still forced for http, disabled for local and ssh)
 
   $ cat >> $HGRCPATH << EOF
   > [experimental]
   > bundle2-output-capture=False
   > EOF
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   Fail early!
   transaction abort!
   Cleaning up the mess...
   rollback completed
   abort: pretxnchangegroup hook exited with status 1
   [255]
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: Fail early!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pretxnchangegroup hook exited with status 1
   abort: push failed on remote
   [255]
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: Fail early!
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pretxnchangegroup hook exited with status 1
   abort: push failed on remote
   [255]
 
 Check abort from mandatory pushkey
 
   $ cat > mandatorypart.py << EOF
   > from mercurial import exchange
   > from mercurial import pushkey
   > from mercurial import node
   > from mercurial import error
   > @exchange.b2partsgenerator('failingpuskey')
   > def addfailingpushey(pushop, bundler):
   >     enc = pushkey.encode
   >     part = bundler.newpart('pushkey')
   >     part.addparam('namespace', enc('phases'))
   >     part.addparam('key', enc(pushop.repo['cd010b8cd998'].hex()))
   >     part.addparam('old', enc(str(0))) # successful update
   >     part.addparam('new', enc(str(0)))
   >     def fail(pushop, exc):
   >         raise error.Abort('Correct phase push failed (because hooks)')
   >     pushop.pkfailcb[part.id] = fail
   > EOF
   $ cat >> $HGRCPATH << EOF
   > [hooks]
   > pretxnchangegroup=
   > pretxnclose.failpush=
   > prepushkey.failpush = sh -c "echo 'do not push the key !'; false"
   > [extensions]
   > mandatorypart=$TESTTMP/mandatorypart.py
   > EOF
   $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS # reload http config
   $ hg serve -R other -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
 (Failure from a hook)
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   do not push the key !
   pushkey-abort: prepushkey.failpush hook exited with status 1
   transaction abort!
   Cleaning up the mess...
   rollback completed
   abort: Correct phase push failed (because hooks)
   [255]
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: do not push the key !
   remote: pushkey-abort: prepushkey.failpush hook exited with status 1
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   abort: Correct phase push failed (because hooks)
   [255]
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: do not push the key !
   remote: pushkey-abort: prepushkey.failpush hook exited with status 1
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   abort: Correct phase push failed (because hooks)
   [255]
 
 (Failure from a the pushkey)
 
   $ cat > mandatorypart.py << EOF
   > from mercurial import exchange
   > from mercurial import pushkey
   > from mercurial import node
   > from mercurial import error
   > @exchange.b2partsgenerator('failingpuskey')
   > def addfailingpushey(pushop, bundler):
   >     enc = pushkey.encode
   >     part = bundler.newpart('pushkey')
   >     part.addparam('namespace', enc('phases'))
   >     part.addparam('key', enc(pushop.repo['cd010b8cd998'].hex()))
   >     part.addparam('old', enc(str(4))) # will fail
   >     part.addparam('new', enc(str(3)))
   >     def fail(pushop, exc):
   >         raise error.Abort('Clown phase push failed')
   >     pushop.pkfailcb[part.id] = fail
   > EOF
   $ cat >> $HGRCPATH << EOF
   > [hooks]
   > prepushkey.failpush =
   > EOF
   $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS # reload http config
   $ hg serve -R other -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   transaction abort!
   Cleaning up the mess...
   rollback completed
   pushkey: lock state after "phases"
   lock:  free
   wlock: free
   abort: Clown phase push failed
   [255]
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pushkey: lock state after "phases"
   remote: lock:  free
   remote: wlock: free
   abort: Clown phase push failed
   [255]
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: transaction abort!
   remote: Cleaning up the mess...
   remote: rollback completed
   remote: pushkey: lock state after "phases"
   remote: lock:  free
   remote: wlock: free
   abort: Clown phase push failed
   [255]
 
 Test lazily acquiring the lock during unbundle
   $ cp $TESTTMP/hgrc.orig $HGRCPATH
   $ cat >> $HGRCPATH <<EOF
   > [ui]
   > ssh=python "$TESTDIR/dummyssh"
   > EOF
 
   $ cat >> $TESTTMP/locktester.py <<EOF
   > import os
   > from mercurial import extensions, bundle2, util
   > def checklock(orig, repo, *args, **kwargs):
   >     if repo.svfs.lexists("lock"):
   >         raise util.Abort("Lock should not be taken")
   >     return orig(repo, *args, **kwargs)
   > def extsetup(ui):
   >    extensions.wrapfunction(bundle2, 'processbundle', checklock)
   > EOF
 
   $ hg init lazylock
   $ cat >> lazylock/.hg/hgrc <<EOF
   > [extensions]
   > locktester=$TESTTMP/locktester.py
   > EOF
 
   $ hg clone -q ssh://user@dummy/lazylock lazylockclient
   $ cd lazylockclient
   $ touch a && hg ci -Aqm a
   $ hg push
   pushing to ssh://user@dummy/lazylock
   searching for changes
   remote: Lock should not be taken
   abort: push failed on remote
   [255]
 
   $ cat >> ../lazylock/.hg/hgrc <<EOF
   > [experimental]
   > bundle2lazylocking=True
   > EOF
   $ hg push
   pushing to ssh://user@dummy/lazylock
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
 
   $ cd ..
 
 Servers can disable bundle1 for clone/pull operations
 
   $ killdaemons.py
   $ hg init bundle2onlyserver
   $ cd bundle2onlyserver
   $ cat > .hg/hgrc << EOF
   > [server]
   > bundle1.pull = false
   > EOF
 
   $ touch foo
   $ hg -q commit -A -m initial
 
   $ hg serve -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ hg --config devel.legacy.exchange=bundle1 clone http://localhost:$HGPORT/ not-bundle2
   requesting all changes
   abort: remote error:
   incompatible Mercurial client; bundle2 required
   (see https://www.mercurial-scm.org/wiki/IncompatibleClient)
   [255]
   $ killdaemons.py
   $ cd ..
 
 bundle1 can still pull non-generaldelta repos when generaldelta bundle1 disabled
 
   $ hg --config format.usegeneraldelta=false init notgdserver
   $ cd notgdserver
   $ cat > .hg/hgrc << EOF
   > [server]
   > bundle1gd.pull = false
   > EOF
 
   $ touch foo
   $ hg -q commit -A -m initial
   $ hg serve -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ hg --config devel.legacy.exchange=bundle1 clone http://localhost:$HGPORT/ not-bundle2-1
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ killdaemons.py
   $ cd ../bundle2onlyserver
 
 bundle1 pull can be disabled for generaldelta repos only
 
   $ cat > .hg/hgrc << EOF
   > [server]
   > bundle1gd.pull = false
   > EOF
 
   $ hg serve -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
   $ hg --config devel.legacy.exchange=bundle1 clone http://localhost:$HGPORT/ not-bundle2
   requesting all changes
   abort: remote error:
   incompatible Mercurial client; bundle2 required
   (see https://www.mercurial-scm.org/wiki/IncompatibleClient)
   [255]
 
   $ killdaemons.py
 
 Verify the global server.bundle1 option works
 
   $ cd ..
   $ cat > bundle2onlyserver/.hg/hgrc << EOF
   > [server]
   > bundle1 = false
   > EOF
   $ hg -R bundle2onlyserver serve -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
   $ hg --config devel.legacy.exchange=bundle1 clone http://localhost:$HGPORT not-bundle2
   requesting all changes
   abort: remote error:
   incompatible Mercurial client; bundle2 required
   (see https://www.mercurial-scm.org/wiki/IncompatibleClient)
   [255]
   $ killdaemons.py
 
   $ hg --config devel.legacy.exchange=bundle1 clone ssh://user@dummy/bundle2onlyserver not-bundle2-ssh
   requesting all changes
   adding changesets
   remote: abort: incompatible Mercurial client; bundle2 required
   remote: (see https://www.mercurial-scm.org/wiki/IncompatibleClient)
   transaction abort!
   rollback completed
   abort: stream ended unexpectedly (got 0 bytes, expected 4)
   [255]
 
   $ cat > bundle2onlyserver/.hg/hgrc << EOF
   > [server]
   > bundle1gd = false
   > EOF
   $ hg -R bundle2onlyserver serve -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ hg --config devel.legacy.exchange=bundle1 clone http://localhost:$HGPORT/ not-bundle2
   requesting all changes
   abort: remote error:
   incompatible Mercurial client; bundle2 required
   (see https://www.mercurial-scm.org/wiki/IncompatibleClient)
   [255]
 
   $ killdaemons.py
 
   $ cd notgdserver
   $ cat > .hg/hgrc << EOF
   > [server]
   > bundle1gd = false
   > EOF
   $ hg serve -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ hg --config devel.legacy.exchange=bundle1 clone http://localhost:$HGPORT/ not-bundle2-2
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ killdaemons.py
   $ cd ../bundle2onlyserver
 
 Verify bundle1 pushes can be disabled
 
   $ cat > .hg/hgrc << EOF
   > [server]
   > bundle1.push = false
   > [web]
   > allow_push = *
   > push_ssl = false
   > EOF
 
   $ hg serve -p $HGPORT -d --pid-file=hg.pid -E error.log
   $ cat hg.pid >> $DAEMON_PIDS
   $ cd ..
 
   $ hg clone http://localhost:$HGPORT bundle2-only
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd bundle2-only
   $ echo commit > foo
   $ hg commit -m commit
   $ hg --config devel.legacy.exchange=bundle1 push
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: remote error:
   incompatible Mercurial client; bundle2 required
   (see https://www.mercurial-scm.org/wiki/IncompatibleClient)
   [255]
 
 (also check with ssh)
 
   $ hg --config devel.legacy.exchange=bundle1 push ssh://user@dummy/bundle2onlyserver
   pushing to ssh://user@dummy/bundle2onlyserver
   searching for changes
   remote: abort: incompatible Mercurial client; bundle2 required
   remote: (see https://www.mercurial-scm.org/wiki/IncompatibleClient)
   [1]
 
   $ hg push
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files

tests/test-bundle2-multiple-changegroups.t

@@ -1,260 +1,260
 Create an extension to test bundle2 with multiple changegroups
 
   $ cat > bundle2.py <<EOF
   > """
   > """
   > from mercurial import changegroup, discovery, exchange
   > 
   > def _getbundlechangegrouppart(bundler, repo, source, bundlecaps=None,
   >                               b2caps=None, heads=None, common=None,
   >                               **kwargs):
   >     # Create two changegroups given the common changesets and heads for the
   >     # changegroup part we are being requested. Use the parent of each head
   >     # in 'heads' as intermediate heads for the first changegroup.
   >     intermediates = [repo[r].p1().node() for r in heads]
   >     outgoing = discovery.outgoing(repo, common, intermediates)
   >     cg = changegroup.getchangegroup(repo, source, outgoing,
   >                                     bundlecaps=bundlecaps)
   >     bundler.newpart('output', data='changegroup1')
   >     bundler.newpart('changegroup', data=cg.getchunks())
   >     outgoing = discovery.outgoing(repo, common + intermediates, heads)
   >     cg = changegroup.getchangegroup(repo, source, outgoing,
   >                                     bundlecaps=bundlecaps)
   >     bundler.newpart('output', data='changegroup2')
   >     bundler.newpart('changegroup', data=cg.getchunks())
   > 
   > def _pull(repo, *args, **kwargs):
   >   pullop = _orig_pull(repo, *args, **kwargs)
   >   repo.ui.write('pullop.cgresult is %d\n' % pullop.cgresult)
   >   return pullop
   > 
   > _orig_pull = exchange.pull
   > exchange.pull = _pull
   > exchange.getbundle2partsmapping['changegroup'] = _getbundlechangegrouppart
   > EOF
 
   $ cat >> $HGRCPATH << EOF
   > [ui]
   > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline}
   > EOF
 
 Start with a simple repository with a single commit
 
   $ hg init repo
   $ cd repo
   $ cat > .hg/hgrc << EOF
   > [extensions]
   > bundle2=$TESTTMP/bundle2.py
   > EOF
 
   $ echo A > A
   $ hg commit -A -m A -q
   $ cd ..
 
 Clone
 
   $ hg clone -q repo clone
 
 Add two linear commits
 
   $ cd repo
   $ echo B > B
   $ hg commit -A -m B -q
   $ echo C > C
   $ hg commit -A -m C -q
 
   $ cd ../clone
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > pretxnchangegroup = sh -c "printenv.py pretxnchangegroup"
   > changegroup = sh -c "printenv.py changegroup"
   > incoming = sh -c "printenv.py incoming"
   > EOF
 
 Pull the new commits in the clone
 
   $ hg pull
   pulling from $TESTTMP/repo (glob)
   searching for changes
   remote: changegroup1
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
-  pretxnchangegroup hook: HG_NODE=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_NODE_LAST=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_PENDING=$TESTTMP/clone HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  pretxnchangegroup hook: HG_HOOKTYPE=pretxnchangegroup HG_NODE=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_NODE_LAST=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_PENDING=$TESTTMP/clone HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
   remote: changegroup2
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
-  pretxnchangegroup hook: HG_NODE=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_NODE_LAST=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_PENDING=$TESTTMP/clone HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  changegroup hook: HG_NODE=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_NODE_LAST=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  changegroup hook: HG_NODE=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_NODE_LAST=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  pretxnchangegroup hook: HG_HOOKTYPE=pretxnchangegroup HG_NODE=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_NODE_LAST=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_PENDING=$TESTTMP/clone HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_NODE_LAST=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=27547f69f25460a52fff66ad004e58da7ad3fb56 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_NODE_LAST=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=f838bfaca5c7226600ebcfd84f3c3c13a28d3757 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
   pullop.cgresult is 1
   (run 'hg update' to get a working copy)
   $ hg update
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -G
   @  2:f838bfaca5c7 public test  C
   |
   o  1:27547f69f254 public test  B
   |
   o  0:4a2df7238c3b public test  A
   
 Add more changesets with multiple heads to the original repository
 
   $ cd ../repo
   $ echo D > D
   $ hg commit -A -m D -q
   $ hg up -r 1
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ echo E > E
   $ hg commit -A -m E -q
   $ echo F > F
   $ hg commit -A -m F -q
   $ hg up -r 1
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ echo G > G
   $ hg commit -A -m G -q
   $ hg up -r 3
   2 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo H > H
   $ hg commit -A -m H -q
   $ hg log -G
   @  7:5cd59d311f65 draft test  H
   |
   | o  6:1d14c3ce6ac0 draft test  G
   | |
   | | o  5:7f219660301f draft test  F
   | | |
   | | o  4:8a5212ebc852 draft test  E
   | |/
   o |  3:b3325c91a4d9 draft test  D
   | |
   o |  2:f838bfaca5c7 draft test  C
   |/
   o  1:27547f69f254 draft test  B
   |
   o  0:4a2df7238c3b draft test  A
   
 New heads are reported during transfer and properly accounted for in
 pullop.cgresult
 
   $ cd ../clone
   $ hg pull
   pulling from $TESTTMP/repo (glob)
   searching for changes
   remote: changegroup1
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files (+1 heads)
-  pretxnchangegroup hook: HG_NODE=b3325c91a4d916bcc4cdc83ea3fe4ece46a42f6e HG_NODE_LAST=8a5212ebc8527f9fb821601504794e3eb11a1ed3 HG_PENDING=$TESTTMP/clone HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  pretxnchangegroup hook: HG_HOOKTYPE=pretxnchangegroup HG_NODE=b3325c91a4d916bcc4cdc83ea3fe4ece46a42f6e HG_NODE_LAST=8a5212ebc8527f9fb821601504794e3eb11a1ed3 HG_PENDING=$TESTTMP/clone HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
   remote: changegroup2
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 3 changes to 3 files (+1 heads)
-  pretxnchangegroup hook: HG_NODE=7f219660301fe4c8a116f714df5e769695cc2b46 HG_NODE_LAST=5cd59d311f6508b8e0ed28a266756c859419c9f1 HG_PENDING=$TESTTMP/clone HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  changegroup hook: HG_NODE=b3325c91a4d916bcc4cdc83ea3fe4ece46a42f6e HG_NODE_LAST=8a5212ebc8527f9fb821601504794e3eb11a1ed3 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=b3325c91a4d916bcc4cdc83ea3fe4ece46a42f6e HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=8a5212ebc8527f9fb821601504794e3eb11a1ed3 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  changegroup hook: HG_NODE=7f219660301fe4c8a116f714df5e769695cc2b46 HG_NODE_LAST=5cd59d311f6508b8e0ed28a266756c859419c9f1 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=7f219660301fe4c8a116f714df5e769695cc2b46 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=1d14c3ce6ac0582d2809220d33e8cd7a696e0156 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=5cd59d311f6508b8e0ed28a266756c859419c9f1 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  pretxnchangegroup hook: HG_HOOKTYPE=pretxnchangegroup HG_NODE=7f219660301fe4c8a116f714df5e769695cc2b46 HG_NODE_LAST=5cd59d311f6508b8e0ed28a266756c859419c9f1 HG_PENDING=$TESTTMP/clone HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=b3325c91a4d916bcc4cdc83ea3fe4ece46a42f6e HG_NODE_LAST=8a5212ebc8527f9fb821601504794e3eb11a1ed3 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=b3325c91a4d916bcc4cdc83ea3fe4ece46a42f6e HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=8a5212ebc8527f9fb821601504794e3eb11a1ed3 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=7f219660301fe4c8a116f714df5e769695cc2b46 HG_NODE_LAST=5cd59d311f6508b8e0ed28a266756c859419c9f1 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=7f219660301fe4c8a116f714df5e769695cc2b46 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=1d14c3ce6ac0582d2809220d33e8cd7a696e0156 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=5cd59d311f6508b8e0ed28a266756c859419c9f1 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
   pullop.cgresult is 3
   (run 'hg heads' to see heads, 'hg merge' to merge)
   $ hg log -G
   o  7:5cd59d311f65 public test  H
   |
   | o  6:1d14c3ce6ac0 public test  G
   | |
   | | o  5:7f219660301f public test  F
   | | |
   | | o  4:8a5212ebc852 public test  E
   | |/
   o |  3:b3325c91a4d9 public test  D
   | |
   @ |  2:f838bfaca5c7 public test  C
   |/
   o  1:27547f69f254 public test  B
   |
   o  0:4a2df7238c3b public test  A
   
 Removing a head from the original repository by merging it
 
   $ cd ../repo
   $ hg merge -r 6 -q
   $ hg commit -m Merge
   $ echo I > I
   $ hg commit -A -m H -q
   $ hg log -G
   @  9:9d18e5bd9ab0 draft test  H
   |
   o    8:71bd7b46de72 draft test  Merge
   |\
   | o  7:5cd59d311f65 draft test  H
   | |
   o |  6:1d14c3ce6ac0 draft test  G
   | |
   | | o  5:7f219660301f draft test  F
   | | |
   +---o  4:8a5212ebc852 draft test  E
   | |
   | o  3:b3325c91a4d9 draft test  D
   | |
   | o  2:f838bfaca5c7 draft test  C
   |/
   o  1:27547f69f254 draft test  B
   |
   o  0:4a2df7238c3b draft test  A
   
 Removed heads are reported during transfer and properly accounted for in
 pullop.cgresult
 
   $ cd ../clone
   $ hg pull
   pulling from $TESTTMP/repo (glob)
   searching for changes
   remote: changegroup1
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 0 changes to 0 files (-1 heads)
-  pretxnchangegroup hook: HG_NODE=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_NODE_LAST=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_PENDING=$TESTTMP/clone HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  pretxnchangegroup hook: HG_HOOKTYPE=pretxnchangegroup HG_NODE=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_NODE_LAST=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_PENDING=$TESTTMP/clone HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
   remote: changegroup2
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
-  pretxnchangegroup hook: HG_NODE=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_NODE_LAST=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_PENDING=$TESTTMP/clone HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  changegroup hook: HG_NODE=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_NODE_LAST=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  changegroup hook: HG_NODE=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_NODE_LAST=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
-  incoming hook: HG_NODE=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  pretxnchangegroup hook: HG_HOOKTYPE=pretxnchangegroup HG_NODE=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_NODE_LAST=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_PENDING=$TESTTMP/clone HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_NODE_LAST=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=71bd7b46de72e69a32455bf88d04757d542e6cf4 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_NODE_LAST=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=9d18e5bd9ab09337802595d49f1dad0c98df4d84 HG_PHASES_MOVED=1 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/repo
   pullop.cgresult is -2
   (run 'hg update' to get a working copy)
   $ hg log -G
   o  9:9d18e5bd9ab0 public test  H
   |
   o    8:71bd7b46de72 public test  Merge
   |\
   | o  7:5cd59d311f65 public test  H
   | |
   o |  6:1d14c3ce6ac0 public test  G
   | |
   | | o  5:7f219660301f public test  F
   | | |
   +---o  4:8a5212ebc852 public test  E
   | |
   | o  3:b3325c91a4d9 public test  D
   | |
   | @  2:f838bfaca5c7 public test  C
   |/
   o  1:27547f69f254 public test  B
   |
   o  0:4a2df7238c3b public test  A
   

tests/test-hook.t

@@ -1,935 +1,935
 commit hooks can see env vars
 (and post-transaction one are run unlocked)
 
 
   $ cat > $TESTTMP/txnabort.checkargs.py <<EOF
   > def showargs(ui, repo, hooktype, **kwargs):
   >     ui.write('%s python hook: %s\n' % (hooktype, ','.join(sorted(kwargs))))
   > EOF
 
   $ hg init a
   $ cd a
   $ cat > .hg/hgrc <<EOF
   > [hooks]
   > commit = sh -c "HG_LOCAL= HG_TAG= printenv.py commit"
   > commit.b = sh -c "HG_LOCAL= HG_TAG= printenv.py commit.b"
   > precommit = sh -c  "HG_LOCAL= HG_NODE= HG_TAG= printenv.py precommit"
   > pretxncommit = sh -c "HG_LOCAL= HG_TAG= printenv.py pretxncommit"
   > pretxncommit.tip = hg -q tip
   > pre-identify = sh -c "printenv.py pre-identify 1"
   > pre-cat = sh -c "printenv.py pre-cat"
   > post-cat = sh -c "printenv.py post-cat"
   > pretxnopen = sh -c "HG_LOCAL= HG_TAG= printenv.py pretxnopen"
   > pretxnclose = sh -c "HG_LOCAL= HG_TAG= printenv.py pretxnclose"
   > txnclose = sh -c "HG_LOCAL= HG_TAG= printenv.py txnclose"
   > txnabort.0 = python:$TESTTMP/txnabort.checkargs.py:showargs
   > txnabort.1 = sh -c "HG_LOCAL= HG_TAG= printenv.py txnabort"
   > txnclose.checklock = sh -c "hg debuglock > /dev/null"
   > EOF
   $ echo a > a
   $ hg add a
   $ hg commit -m a
-  precommit hook: HG_PARENT1=0000000000000000000000000000000000000000
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  pretxncommit hook: HG_NODE=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PARENT1=0000000000000000000000000000000000000000 HG_PENDING=$TESTTMP/a
+  precommit hook: HG_HOOKTYPE=precommit HG_PARENT1=0000000000000000000000000000000000000000
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  pretxncommit hook: HG_HOOKTYPE=pretxncommit HG_NODE=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PARENT1=0000000000000000000000000000000000000000 HG_PENDING=$TESTTMP/a
   0:cb9a9f314b8b
-  pretxnclose hook: HG_PENDING=$TESTTMP/a HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  txnclose hook: HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  commit hook: HG_NODE=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PARENT1=0000000000000000000000000000000000000000
-  commit.b hook: HG_NODE=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PARENT1=0000000000000000000000000000000000000000
+  pretxnclose hook: HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  txnclose hook: HG_HOOKTYPE=txnclose HG_PHASES_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  commit hook: HG_HOOKTYPE=commit HG_NODE=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PARENT1=0000000000000000000000000000000000000000
+  commit.b hook: HG_HOOKTYPE=commit HG_NODE=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PARENT1=0000000000000000000000000000000000000000
 
   $ hg clone . ../b
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd ../b
 
 changegroup hooks can see env vars
 
   $ cat > .hg/hgrc <<EOF
   > [hooks]
   > prechangegroup = sh -c "printenv.py prechangegroup"
   > changegroup = sh -c "printenv.py changegroup"
   > incoming = sh -c "printenv.py incoming"
   > EOF
 
 pretxncommit and commit hooks can see both parents of merge
 
   $ cd ../a
   $ echo b >> a
   $ hg commit -m a1 -d "1 0"
-  precommit hook: HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  pretxncommit hook: HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PENDING=$TESTTMP/a
+  precommit hook: HG_HOOKTYPE=precommit HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  pretxncommit hook: HG_HOOKTYPE=pretxncommit HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PENDING=$TESTTMP/a
   1:ab228980c14d
-  pretxnclose hook: HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  txnclose hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  commit hook: HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
-  commit.b hook: HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
+  pretxnclose hook: HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  txnclose hook: HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  commit hook: HG_HOOKTYPE=commit HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
+  commit.b hook: HG_HOOKTYPE=commit HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
   $ hg update -C 0
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo b > b
   $ hg add b
   $ hg commit -m b -d '1 0'
-  precommit hook: HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  pretxncommit hook: HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PENDING=$TESTTMP/a
+  precommit hook: HG_HOOKTYPE=precommit HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  pretxncommit hook: HG_HOOKTYPE=pretxncommit HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b HG_PENDING=$TESTTMP/a
   2:ee9deb46ab31
-  pretxnclose hook: HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  pretxnclose hook: HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
   created new head
-  txnclose hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  commit hook: HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
-  commit.b hook: HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
+  txnclose hook: HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  commit hook: HG_HOOKTYPE=commit HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
+  commit.b hook: HG_HOOKTYPE=commit HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT1=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
   $ hg merge 1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg commit -m merge -d '2 0'
-  precommit hook: HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  pretxncommit hook: HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd HG_PENDING=$TESTTMP/a
+  precommit hook: HG_HOOKTYPE=precommit HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  pretxncommit hook: HG_HOOKTYPE=pretxncommit HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd HG_PENDING=$TESTTMP/a
   3:07f3376c1e65
-  pretxnclose hook: HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  txnclose hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  commit hook: HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd
-  commit.b hook: HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd
+  pretxnclose hook: HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  txnclose hook: HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  commit hook: HG_HOOKTYPE=commit HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd
+  commit.b hook: HG_HOOKTYPE=commit HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PARENT1=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_PARENT2=ab228980c14deea8b9555d91c9581127383e40fd
 
 test generic hooks
 
   $ hg id
-  pre-identify hook: HG_ARGS=id HG_OPTS={'bookmarks': None, 'branch': None, 'id': None, 'insecure': None, 'num': None, 'remotecmd': '', 'rev': '', 'ssh': '', 'tags': None} HG_PATS=[]
+  pre-identify hook: HG_ARGS=id HG_HOOKTYPE=pre-identify HG_OPTS={'bookmarks': None, 'branch': None, 'id': None, 'insecure': None, 'num': None, 'remotecmd': '', 'rev': '', 'ssh': '', 'tags': None} HG_PATS=[]
   abort: pre-identify hook exited with status 1
   [255]
   $ hg cat b
-  pre-cat hook: HG_ARGS=cat b HG_OPTS={'decode': None, 'exclude': [], 'include': [], 'output': '', 'rev': ''} HG_PATS=['b']
+  pre-cat hook: HG_ARGS=cat b HG_HOOKTYPE=pre-cat HG_OPTS={'decode': None, 'exclude': [], 'include': [], 'output': '', 'rev': ''} HG_PATS=['b']
   b
-  post-cat hook: HG_ARGS=cat b HG_OPTS={'decode': None, 'exclude': [], 'include': [], 'output': '', 'rev': ''} HG_PATS=['b'] HG_RESULT=0
+  post-cat hook: HG_ARGS=cat b HG_HOOKTYPE=post-cat HG_OPTS={'decode': None, 'exclude': [], 'include': [], 'output': '', 'rev': ''} HG_PATS=['b'] HG_RESULT=0
 
   $ cd ../b
   $ hg pull ../a
   pulling from ../a
   searching for changes
-  prechangegroup hook: HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  prechangegroup hook: HG_HOOKTYPE=prechangegroup HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 2 changes to 2 files
-  changegroup hook: HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_NODE_LAST=07f3376c1e655977439df2a814e3cc14b27abac2 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
-  incoming hook: HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
-  incoming hook: HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
-  incoming hook: HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_NODE_LAST=07f3376c1e655977439df2a814e3cc14b27abac2 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=ab228980c14deea8b9555d91c9581127383e40fd HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=ee9deb46ab31e4cc3310f3cf0c3d668e4d8fffc2 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  incoming hook: HG_HOOKTYPE=incoming HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
   (run 'hg update' to get a working copy)
 
 tag hooks can see env vars
 
   $ cd ../a
   $ cat >> .hg/hgrc <<EOF
   > pretag = sh -c "printenv.py pretag"
   > tag = sh -c "HG_PARENT1= HG_PARENT2= printenv.py tag"
   > EOF
   $ hg tag -d '3 0' a
-  pretag hook: HG_LOCAL=0 HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_TAG=a
-  precommit hook: HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  pretxncommit hook: HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PENDING=$TESTTMP/a
+  pretag hook: HG_HOOKTYPE=pretag HG_LOCAL=0 HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_TAG=a
+  precommit hook: HG_HOOKTYPE=precommit HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  pretxncommit hook: HG_HOOKTYPE=pretxncommit HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2 HG_PENDING=$TESTTMP/a
   4:539e4b31b6dc
-  pretxnclose hook: HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  tag hook: HG_LOCAL=0 HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_TAG=a
-  txnclose hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  commit hook: HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2
-  commit.b hook: HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2
+  pretxnclose hook: HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  tag hook: HG_HOOKTYPE=tag HG_LOCAL=0 HG_NODE=07f3376c1e655977439df2a814e3cc14b27abac2 HG_TAG=a
+  txnclose hook: HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  commit hook: HG_HOOKTYPE=commit HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2
+  commit.b hook: HG_HOOKTYPE=commit HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PARENT1=07f3376c1e655977439df2a814e3cc14b27abac2
   $ hg tag -l la
-  pretag hook: HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=la
-  tag hook: HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=la
+  pretag hook: HG_HOOKTYPE=pretag HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=la
+  tag hook: HG_HOOKTYPE=tag HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=la
 
 pretag hook can forbid tagging
 
   $ cat >> .hg/hgrc <<EOF
   > pretag.forbid = sh -c "printenv.py pretag.forbid 1"
   > EOF
   $ hg tag -d '4 0' fa
-  pretag hook: HG_LOCAL=0 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fa
-  pretag.forbid hook: HG_LOCAL=0 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fa
+  pretag hook: HG_HOOKTYPE=pretag HG_LOCAL=0 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fa
+  pretag.forbid hook: HG_HOOKTYPE=pretag HG_LOCAL=0 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fa
   abort: pretag.forbid hook exited with status 1
   [255]
   $ hg tag -l fla
-  pretag hook: HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fla
-  pretag.forbid hook: HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fla
+  pretag hook: HG_HOOKTYPE=pretag HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fla
+  pretag.forbid hook: HG_HOOKTYPE=pretag HG_LOCAL=1 HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_TAG=fla
   abort: pretag.forbid hook exited with status 1
   [255]
 
 pretxncommit hook can see changeset, can roll back txn, changeset no
 more there after
 
   $ cat >> .hg/hgrc <<EOF
   > pretxncommit.forbid0 = sh -c "hg tip -q"
   > pretxncommit.forbid1 = sh -c "printenv.py pretxncommit.forbid 1"
   > EOF
   $ echo z > z
   $ hg add z
   $ hg -q tip
   4:539e4b31b6dc
   $ hg commit -m 'fail' -d '4 0'
-  precommit hook: HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
-  pretxncommit hook: HG_NODE=6f611f8018c10e827fee6bd2bc807f937e761567 HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PENDING=$TESTTMP/a
+  precommit hook: HG_HOOKTYPE=precommit HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  pretxncommit hook: HG_HOOKTYPE=pretxncommit HG_NODE=6f611f8018c10e827fee6bd2bc807f937e761567 HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PENDING=$TESTTMP/a
   5:6f611f8018c1
   5:6f611f8018c1
-  pretxncommit.forbid hook: HG_NODE=6f611f8018c10e827fee6bd2bc807f937e761567 HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PENDING=$TESTTMP/a
+  pretxncommit.forbid hook: HG_HOOKTYPE=pretxncommit HG_NODE=6f611f8018c10e827fee6bd2bc807f937e761567 HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PENDING=$TESTTMP/a
   transaction abort!
   txnabort python hook: txnid,txnname
-  txnabort hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
+  txnabort hook: HG_HOOKTYPE=txnabort HG_TXNID=TXN:$ID$ HG_TXNNAME=commit
   rollback completed
   abort: pretxncommit.forbid1 hook exited with status 1
   [255]
   $ hg -q tip
   4:539e4b31b6dc
 
 (Check that no 'changelog.i.a' file were left behind)
 
   $ ls -1 .hg/store/
   00changelog.i
   00manifest.i
   data
   fncache
   journal.phaseroots
   phaseroots
   undo
   undo.backup.fncache
   undo.backupfiles
   undo.phaseroots
 
 
 precommit hook can prevent commit
 
   $ cat >> .hg/hgrc <<EOF
   > precommit.forbid = sh -c "printenv.py precommit.forbid 1"
   > EOF
   $ hg commit -m 'fail' -d '4 0'
-  precommit hook: HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10
-  precommit.forbid hook: HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10
+  precommit hook: HG_HOOKTYPE=precommit HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10
+  precommit.forbid hook: HG_HOOKTYPE=precommit HG_PARENT1=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10
   abort: precommit.forbid hook exited with status 1
   [255]
   $ hg -q tip
   4:539e4b31b6dc
 
 preupdate hook can prevent update
 
   $ cat >> .hg/hgrc <<EOF
   > preupdate = sh -c "printenv.py preupdate"
   > EOF
   $ hg update 1
-  preupdate hook: HG_PARENT1=ab228980c14d
+  preupdate hook: HG_HOOKTYPE=preupdate HG_PARENT1=ab228980c14d
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
 
 update hook
 
   $ cat >> .hg/hgrc <<EOF
   > update = sh -c "printenv.py update"
   > EOF
   $ hg update
-  preupdate hook: HG_PARENT1=539e4b31b6dc
-  update hook: HG_ERROR=0 HG_PARENT1=539e4b31b6dc
+  preupdate hook: HG_HOOKTYPE=preupdate HG_PARENT1=539e4b31b6dc
+  update hook: HG_ERROR=0 HG_HOOKTYPE=update HG_PARENT1=539e4b31b6dc
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 pushkey hook
 
   $ cat >> .hg/hgrc <<EOF
   > pushkey = sh -c "printenv.py pushkey"
   > EOF
   $ cd ../b
   $ hg bookmark -r null foo
   $ hg push -B foo ../a
   pushing to ../a
   searching for changes
   no changes found
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=push
-  pretxnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_PENDING=$TESTTMP/a HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_TXNNAME=push HG_URL=file:$TESTTMP/a
-  pushkey hook: HG_KEY=foo HG_NAMESPACE=bookmarks HG_NEW=0000000000000000000000000000000000000000 HG_RET=1
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_TXNNAME=push HG_URL=file:$TESTTMP/a
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=push
+  pretxnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_TXNNAME=push HG_URL=file:$TESTTMP/a
+  pushkey hook: HG_HOOKTYPE=pushkey HG_KEY=foo HG_NAMESPACE=bookmarks HG_NEW=0000000000000000000000000000000000000000 HG_RET=1
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_BUNDLE2=1 HG_HOOKTYPE=txnclose HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_TXNNAME=push HG_URL=file:$TESTTMP/a
   exporting bookmark foo
   [1]
   $ cd ../a
 
 listkeys hook
 
   $ cat >> .hg/hgrc <<EOF
   > listkeys = sh -c "printenv.py listkeys"
   > EOF
   $ hg bookmark -r null bar
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
-  pretxnclose hook: HG_BOOKMARK_MOVED=1 HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  pretxnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ cd ../b
   $ hg pull -B bar ../a
   pulling from ../a
-  listkeys hook: HG_NAMESPACE=bookmarks HG_VALUES={'bar': '0000000000000000000000000000000000000000', 'foo': '0000000000000000000000000000000000000000'}
+  listkeys hook: HG_HOOKTYPE=listkeys HG_NAMESPACE=bookmarks HG_VALUES={'bar': '0000000000000000000000000000000000000000', 'foo': '0000000000000000000000000000000000000000'}
   no changes found
-  listkeys hook: HG_NAMESPACE=phases HG_VALUES={'cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b': '1', 'publishing': 'True'}
+  listkeys hook: HG_HOOKTYPE=listkeys HG_NAMESPACE=phases HG_VALUES={'cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b': '1', 'publishing': 'True'}
   adding remote bookmark bar
   $ cd ../a
 
 test that prepushkey can prevent incoming keys
 
   $ cat >> .hg/hgrc <<EOF
   > prepushkey = sh -c "printenv.py prepushkey.forbid 1"
   > EOF
   $ cd ../b
   $ hg bookmark -r null baz
   $ hg push -B baz ../a
   pushing to ../a
   searching for changes
-  listkeys hook: HG_NAMESPACE=phases HG_VALUES={'cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b': '1', 'publishing': 'True'}
-  listkeys hook: HG_NAMESPACE=bookmarks HG_VALUES={'bar': '0000000000000000000000000000000000000000', 'foo': '0000000000000000000000000000000000000000'}
+  listkeys hook: HG_HOOKTYPE=listkeys HG_NAMESPACE=phases HG_VALUES={'cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b': '1', 'publishing': 'True'}
+  listkeys hook: HG_HOOKTYPE=listkeys HG_NAMESPACE=bookmarks HG_VALUES={'bar': '0000000000000000000000000000000000000000', 'foo': '0000000000000000000000000000000000000000'}
   no changes found
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=push
-  prepushkey.forbid hook: HG_BUNDLE2=1 HG_KEY=baz HG_NAMESPACE=bookmarks HG_NEW=0000000000000000000000000000000000000000 HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=push
+  prepushkey.forbid hook: HG_BUNDLE2=1 HG_HOOKTYPE=prepushkey HG_KEY=baz HG_NAMESPACE=bookmarks HG_NEW=0000000000000000000000000000000000000000 HG_SOURCE=push HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
   pushkey-abort: prepushkey hook exited with status 1
   abort: exporting bookmark baz failed!
   [255]
   $ cd ../a
 
 test that prelistkeys can prevent listing keys
 
   $ cat >> .hg/hgrc <<EOF
   > prelistkeys = sh -c "printenv.py prelistkeys.forbid 1"
   > EOF
   $ hg bookmark -r null quux
-  pretxnopen hook: HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
-  pretxnclose hook: HG_BOOKMARK_MOVED=1 HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
-  txnclose hook: HG_BOOKMARK_MOVED=1 HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  pretxnopen hook: HG_HOOKTYPE=pretxnopen HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  pretxnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=pretxnclose HG_PENDING=$TESTTMP/a HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
+  txnclose hook: HG_BOOKMARK_MOVED=1 HG_HOOKTYPE=txnclose HG_TXNID=TXN:$ID$ HG_TXNNAME=bookmark
   $ cd ../b
   $ hg pull -B quux ../a
   pulling from ../a
-  prelistkeys.forbid hook: HG_NAMESPACE=bookmarks
+  prelistkeys.forbid hook: HG_HOOKTYPE=prelistkeys HG_NAMESPACE=bookmarks
   abort: prelistkeys hook exited with status 1
   [255]
   $ cd ../a
   $ rm .hg/hgrc
 
 prechangegroup hook can prevent incoming changes
 
   $ cd ../b
   $ hg -q tip
   3:07f3376c1e65
   $ cat > .hg/hgrc <<EOF
   > [hooks]
   > prechangegroup.forbid = sh -c "printenv.py prechangegroup.forbid 1"
   > EOF
   $ hg pull ../a
   pulling from ../a
   searching for changes
-  prechangegroup.forbid hook: HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  prechangegroup.forbid hook: HG_HOOKTYPE=prechangegroup HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
   abort: prechangegroup.forbid hook exited with status 1
   [255]
 
 pretxnchangegroup hook can see incoming changes, can roll back txn,
 incoming changes no longer there after
 
   $ cat > .hg/hgrc <<EOF
   > [hooks]
   > pretxnchangegroup.forbid0 = hg tip -q
   > pretxnchangegroup.forbid1 = sh -c "printenv.py pretxnchangegroup.forbid 1"
   > EOF
   $ hg pull ../a
   pulling from ../a
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   4:539e4b31b6dc
-  pretxnchangegroup.forbid hook: HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_NODE_LAST=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PENDING=$TESTTMP/b HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
+  pretxnchangegroup.forbid hook: HG_HOOKTYPE=pretxnchangegroup HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_NODE_LAST=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_PENDING=$TESTTMP/b HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=file:$TESTTMP/a
   transaction abort!
   rollback completed
   abort: pretxnchangegroup.forbid1 hook exited with status 1
   [255]
   $ hg -q tip
   3:07f3376c1e65
 
 outgoing hooks can see env vars
 
   $ rm .hg/hgrc
   $ cat > ../a/.hg/hgrc <<EOF
   > [hooks]
   > preoutgoing = sh -c "printenv.py preoutgoing"
   > outgoing = sh -c "printenv.py outgoing"
   > EOF
   $ hg pull ../a
   pulling from ../a
   searching for changes
-  preoutgoing hook: HG_SOURCE=pull
-  outgoing hook: HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_SOURCE=pull
+  preoutgoing hook: HG_HOOKTYPE=preoutgoing HG_SOURCE=pull
+  outgoing hook: HG_HOOKTYPE=outgoing HG_NODE=539e4b31b6dc99b3cfbaa6b53cbc1c1f9a1e3a10 HG_SOURCE=pull
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   adding remote bookmark quux
   (run 'hg update' to get a working copy)
   $ hg rollback
   repository tip rolled back to revision 3 (undo pull)
 
 preoutgoing hook can prevent outgoing changes
 
   $ cat >> ../a/.hg/hgrc <<EOF
   > preoutgoing.forbid = sh -c "printenv.py preoutgoing.forbid 1"
   > EOF
   $ hg pull ../a
   pulling from ../a
   searching for changes
-  preoutgoing hook: HG_SOURCE=pull
-  preoutgoing.forbid hook: HG_SOURCE=pull
+  preoutgoing hook: HG_HOOKTYPE=preoutgoing HG_SOURCE=pull
+  preoutgoing.forbid hook: HG_HOOKTYPE=preoutgoing HG_SOURCE=pull
   abort: preoutgoing.forbid hook exited with status 1
   [255]
 
 outgoing hooks work for local clones
 
   $ cd ..
   $ cat > a/.hg/hgrc <<EOF
   > [hooks]
   > preoutgoing = sh -c "printenv.py preoutgoing"
   > outgoing = sh -c "printenv.py outgoing"
   > EOF
   $ hg clone a c
-  preoutgoing hook: HG_SOURCE=clone
-  outgoing hook: HG_NODE=0000000000000000000000000000000000000000 HG_SOURCE=clone
+  preoutgoing hook: HG_HOOKTYPE=preoutgoing HG_SOURCE=clone
+  outgoing hook: HG_HOOKTYPE=outgoing HG_NODE=0000000000000000000000000000000000000000 HG_SOURCE=clone
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ rm -rf c
 
 preoutgoing hook can prevent outgoing changes for local clones
 
   $ cat >> a/.hg/hgrc <<EOF
   > preoutgoing.forbid = sh -c "printenv.py preoutgoing.forbid 1"
   > EOF
   $ hg clone a zzz
-  preoutgoing hook: HG_SOURCE=clone
-  preoutgoing.forbid hook: HG_SOURCE=clone
+  preoutgoing hook: HG_HOOKTYPE=preoutgoing HG_SOURCE=clone
+  preoutgoing.forbid hook: HG_HOOKTYPE=preoutgoing HG_SOURCE=clone
   abort: preoutgoing.forbid hook exited with status 1
   [255]
 
   $ cd "$TESTTMP/b"
 
   $ cat > hooktests.py <<EOF
   > from mercurial import error
   > 
   > uncallable = 0
   > 
   > def printargs(args):
   >     args.pop('ui', None)
   >     args.pop('repo', None)
   >     a = list(args.items())
   >     a.sort()
   >     print 'hook args:'
   >     for k, v in a:
   >        print ' ', k, v
   > 
   > def passhook(**args):
   >     printargs(args)
   > 
   > def failhook(**args):
   >     printargs(args)
   >     return True
   > 
   > class LocalException(Exception):
   >     pass
   > 
   > def raisehook(**args):
   >     raise LocalException('exception from hook')
   > 
   > def aborthook(**args):
   >     raise error.Abort('raise abort from hook')
   > 
   > def brokenhook(**args):
   >     return 1 + {}
   > 
   > def verbosehook(ui, **args):
   >     ui.note('verbose output from hook\n')
   > 
   > def printtags(ui, repo, **args):
   >     print sorted(repo.tags())
   > 
   > class container:
   >     unreachable = 1
   > EOF
 
   $ cat > syntaxerror.py << EOF
   > (foo
   > EOF
 
 test python hooks
 
 #if windows
   $ PYTHONPATH="$TESTTMP/b;$PYTHONPATH"
 #else
   $ PYTHONPATH="$TESTTMP/b:$PYTHONPATH"
 #endif
   $ export PYTHONPATH
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.broken = python:hooktests.brokenhook' >> ../a/.hg/hgrc
   $ hg pull ../a 2>&1 | grep 'raised an exception'
   error: preoutgoing.broken hook raised an exception: unsupported operand type(s) for +: 'int' and 'dict'
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.raise = python:hooktests.raisehook' >> ../a/.hg/hgrc
   $ hg pull ../a 2>&1 | grep 'raised an exception'
   error: preoutgoing.raise hook raised an exception: exception from hook
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.abort = python:hooktests.aborthook' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   error: preoutgoing.abort hook failed: raise abort from hook
   abort: raise abort from hook
   [255]
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.fail = python:hooktests.failhook' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   hook args:
     hooktype preoutgoing
     source pull
   abort: preoutgoing.fail hook failed
   [255]
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.uncallable = python:hooktests.uncallable' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   abort: preoutgoing.uncallable hook is invalid: "hooktests.uncallable" is not callable
   [255]
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.nohook = python:hooktests.nohook' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   abort: preoutgoing.nohook hook is invalid: "hooktests.nohook" is not defined
   [255]
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.nomodule = python:nomodule' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   abort: preoutgoing.nomodule hook is invalid: "nomodule" not in a module
   [255]
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.badmodule = python:nomodule.nowhere' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   abort: preoutgoing.badmodule hook is invalid: import of "nomodule" failed
   (run with --traceback for stack trace)
   [255]
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.unreachable = python:hooktests.container.unreachable' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   abort: preoutgoing.unreachable hook is invalid: import of "hooktests.container" failed
   (run with --traceback for stack trace)
   [255]
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.syntaxerror = python:syntaxerror.syntaxerror' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   abort: preoutgoing.syntaxerror hook is invalid: import of "syntaxerror" failed
   (run with --traceback for stack trace)
   [255]
 
 The second egrep is to filter out lines like '    ^', which are slightly
 different between Python 2.6 and Python 2.7.
   $ hg pull ../a --traceback 2>&1 | egrep -v '^( +File|    [_a-zA-Z*(])' | egrep -v '^( )+(\^)?$'
   pulling from ../a
   searching for changes
   exception from first failed import attempt:
   Traceback (most recent call last):
   SyntaxError: * (glob)
   exception from second failed import attempt:
   Traceback (most recent call last):
   ImportError: No module named hgext_syntaxerror
   Traceback (most recent call last):
   HookLoadError: preoutgoing.syntaxerror hook is invalid: import of "syntaxerror" failed
   abort: preoutgoing.syntaxerror hook is invalid: import of "syntaxerror" failed
 
   $ echo '[hooks]' > ../a/.hg/hgrc
   $ echo 'preoutgoing.pass = python:hooktests.passhook' >> ../a/.hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   hook args:
     hooktype preoutgoing
     source pull
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   adding remote bookmark quux
   (run 'hg update' to get a working copy)
 
 post- python hooks that fail to *run* don't cause an abort
   $ rm ../a/.hg/hgrc
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'post-pull.broken = python:hooktests.brokenhook' >> .hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   no changes found
   error: post-pull.broken hook raised an exception: unsupported operand type(s) for +: 'int' and 'dict'
   (run with --traceback for stack trace)
 
 but post- python hooks that fail to *load* do
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'post-pull.nomodule = python:nomodule' >> .hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   no changes found
   abort: post-pull.nomodule hook is invalid: "nomodule" not in a module
   [255]
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'post-pull.badmodule = python:nomodule.nowhere' >> .hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   no changes found
   abort: post-pull.badmodule hook is invalid: import of "nomodule" failed
   (run with --traceback for stack trace)
   [255]
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'post-pull.nohook = python:hooktests.nohook' >> .hg/hgrc
   $ hg pull ../a
   pulling from ../a
   searching for changes
   no changes found
   abort: post-pull.nohook hook is invalid: "hooktests.nohook" is not defined
   [255]
 
 make sure --traceback works
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'commit.abort = python:hooktests.aborthook' >> .hg/hgrc
 
   $ echo aa > a
   $ hg --traceback commit -d '0 0' -ma 2>&1 | grep '^Traceback'
   Traceback (most recent call last):
 
   $ cd ..
   $ hg init c
   $ cd c
 
   $ cat > hookext.py <<EOF
   > def autohook(**args):
   >     print "Automatically installed hook"
   > 
   > def reposetup(ui, repo):
   >     repo.ui.setconfig("hooks", "commit.auto", autohook)
   > EOF
   $ echo '[extensions]' >> .hg/hgrc
   $ echo 'hookext = hookext.py' >> .hg/hgrc
 
   $ touch foo
   $ hg add foo
   $ hg ci -d '0 0' -m 'add foo'
   Automatically installed hook
   $ echo >> foo
   $ hg ci --debug -d '0 0' -m 'change foo'
   committing files:
   foo
   committing manifest
   committing changelog
   committed changeset 1:52998019f6252a2b893452765fcb0a47351a5708
   calling hook commit.auto: hgext_hookext.autohook
   Automatically installed hook
 
   $ hg showconfig hooks
   hooks.commit.auto=<function autohook at *> (glob)
 
 test python hook configured with python:[file]:[hook] syntax
 
   $ cd ..
   $ mkdir d
   $ cd d
   $ hg init repo
   $ mkdir hooks
 
   $ cd hooks
   $ cat > testhooks.py <<EOF
   > def testhook(**args):
   >     print 'hook works'
   > EOF
   $ echo '[hooks]' > ../repo/.hg/hgrc
   $ echo "pre-commit.test = python:`pwd`/testhooks.py:testhook" >> ../repo/.hg/hgrc
 
   $ cd ../repo
   $ hg commit -d '0 0'
   hook works
   nothing changed
   [1]
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo "update.ne = python:`pwd`/nonexistent.py:testhook" >> .hg/hgrc
   $ echo "pre-identify.npmd = python:`pwd`/:no_python_module_dir" >> .hg/hgrc
 
   $ hg up null
   loading update.ne hook failed:
   abort: No such file or directory: $TESTTMP/d/repo/nonexistent.py
   [255]
 
   $ hg id
   loading pre-identify.npmd hook failed:
   abort: No module named repo!
   [255]
 
   $ cd ../../b
 
 make sure --traceback works on hook import failure
 
   $ cat > importfail.py <<EOF
   > import somebogusmodule
   > # dereference something in the module to force demandimport to load it
   > somebogusmodule.whatever
   > EOF
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'precommit.importfail = python:importfail.whatever' >> .hg/hgrc
 
   $ echo a >> a
   $ hg --traceback commit -ma 2>&1 | egrep -v '^( +File|    [a-zA-Z(])'
   exception from first failed import attempt:
   Traceback (most recent call last):
   ImportError: No module named somebogusmodule
   exception from second failed import attempt:
   Traceback (most recent call last):
   ImportError: No module named hgext_importfail
   Traceback (most recent call last):
   HookLoadError: precommit.importfail hook is invalid: import of "importfail" failed
   abort: precommit.importfail hook is invalid: import of "importfail" failed
 
 Issue1827: Hooks Update & Commit not completely post operation
 
 commit and update hooks should run after command completion.  The largefiles
 use demonstrates a recursive wlock, showing the hook doesn't run until the
 final release (and dirstate flush).
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'commit = hg id' >> .hg/hgrc
   $ echo 'update = hg id' >> .hg/hgrc
   $ echo bb > a
   $ hg ci -ma
   223eafe2750c tip
   $ hg up 0 --config extensions.largefiles=
   cb9a9f314b8b
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 make sure --verbose (and --quiet/--debug etc.) are propagated to the local ui
 that is passed to pre/post hooks
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'pre-identify = python:hooktests.verbosehook' >> .hg/hgrc
   $ hg id
   cb9a9f314b8b
   $ hg id --verbose
   calling hook pre-identify: hooktests.verbosehook
   verbose output from hook
   cb9a9f314b8b
 
 Ensure hooks can be prioritized
 
   $ echo '[hooks]' > .hg/hgrc
   $ echo 'pre-identify.a = python:hooktests.verbosehook' >> .hg/hgrc
   $ echo 'pre-identify.b = python:hooktests.verbosehook' >> .hg/hgrc
   $ echo 'priority.pre-identify.b = 1' >> .hg/hgrc
   $ echo 'pre-identify.c = python:hooktests.verbosehook' >> .hg/hgrc
   $ hg id --verbose
   calling hook pre-identify.b: hooktests.verbosehook
   verbose output from hook
   calling hook pre-identify.a: hooktests.verbosehook
   verbose output from hook
   calling hook pre-identify.c: hooktests.verbosehook
   verbose output from hook
   cb9a9f314b8b
 
 new tags must be visible in pretxncommit (issue3210)
 
   $ echo 'pretxncommit.printtags = python:hooktests.printtags' >> .hg/hgrc
   $ hg tag -f foo
   ['a', 'foo', 'tip']
 
 post-init hooks must not crash (issue4983)
 This also creates the `to` repo for the next test block.
 
   $ cd ..
   $ cat << EOF >> hgrc-with-post-init-hook
   > [hooks]
   > post-init = sh -c "printenv.py post-init"
   > EOF
   $ HGRCPATH=hgrc-with-post-init-hook hg init to
-  post-init hook: HG_ARGS=init to HG_OPTS={'insecure': None, 'remotecmd': '', 'ssh': ''} HG_PATS=['to'] HG_RESULT=0
+  post-init hook: HG_ARGS=init to HG_HOOKTYPE=post-init HG_OPTS={'insecure': None, 'remotecmd': '', 'ssh': ''} HG_PATS=['to'] HG_RESULT=0
 
 new commits must be visible in pretxnchangegroup (issue3428)
 
   $ echo '[hooks]' >> to/.hg/hgrc
   $ echo 'prechangegroup = hg --traceback tip' >> to/.hg/hgrc
   $ echo 'pretxnchangegroup = hg --traceback tip' >> to/.hg/hgrc
   $ echo a >> to/a
   $ hg --cwd to ci -Ama
   adding a
   $ hg clone to from
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo aa >> from/a
   $ hg --cwd from ci -mb
   $ hg --cwd from push
   pushing to $TESTTMP/to (glob)
   searching for changes
   changeset:   0:cb9a9f314b8b
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     a
   
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   changeset:   1:9836a07b9b9d
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     b
   
 
 pretxnclose hook failure should abort the transaction
 
   $ hg init txnfailure
   $ cd txnfailure
   $ touch a && hg commit -Aqm a
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > pretxnclose.error = exit 1
   > EOF
   $ hg strip -r 0 --config extensions.strip=
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   saved backup bundle to * (glob)
   transaction abort!
   rollback completed
   strip failed, backup bundle stored in * (glob)
   abort: pretxnclose.error hook exited with status 1
   [255]
   $ hg recover
   no interrupted transaction available
   [1]
   $ cd ..
 
 check whether HG_PENDING makes pending changes only in related
 repositories visible to an external hook.
 
 (emulate a transaction running concurrently by copied
 .hg/store/00changelog.i.a in subsequent test)
 
   $ cat > $TESTTMP/savepending.sh <<EOF
   > cp .hg/store/00changelog.i.a  .hg/store/00changelog.i.a.saved
   > exit 1 # to avoid adding new revision for subsequent tests
   > EOF
   $ cd a
   $ hg tip -q
   4:539e4b31b6dc
   $ hg --config hooks.pretxnclose="sh $TESTTMP/savepending.sh" commit -m "invisible"
   transaction abort!
   rollback completed
   abort: pretxnclose hook exited with status 1
   [255]
   $ cp .hg/store/00changelog.i.a.saved .hg/store/00changelog.i.a
 
 (check (in)visibility of new changeset while transaction running in
 repo)
 
   $ cat > $TESTTMP/checkpending.sh <<EOF
   > echo '@a'
   > hg -R $TESTTMP/a tip -q
   > echo '@a/nested'
   > hg -R $TESTTMP/a/nested tip -q
   > exit 1 # to avoid adding new revision for subsequent tests
   > EOF
   $ hg init nested
   $ cd nested
   $ echo a > a
   $ hg add a
   $ hg --config hooks.pretxnclose="sh $TESTTMP/checkpending.sh" commit -m '#0'
   @a
   4:539e4b31b6dc
   @a/nested
   0:bf5e395ced2c
   transaction abort!
   rollback completed
   abort: pretxnclose hook exited with status 1
   [255]
 
 Hook from untrusted hgrc are reported as failure
 ================================================
 
   $ cat << EOF > $TESTTMP/untrusted.py
   > from mercurial import scmutil, util
   > def uisetup(ui):
   >     class untrustedui(ui.__class__):
   >         def _trusted(self, fp, f):
   >             if util.normpath(fp.name).endswith('untrusted/.hg/hgrc'):
   >                 return False
   >             return super(untrustedui, self)._trusted(fp, f)
   >     ui.__class__ = untrustedui
   > EOF
   $ cat << EOF >> $HGRCPATH
   > [extensions]
   > untrusted=$TESTTMP/untrusted.py
   > EOF
   $ hg init untrusted
   $ cd untrusted
 
 Non-blocking hook
 -----------------
 
   $ cat << EOF >> .hg/hgrc
   > [hooks]
   > txnclose.testing=echo txnclose hook called
   > EOF
   $ touch a && hg commit -Aqm a
   warning: untrusted hook txnclose.testing not executed
   $ hg log
   changeset:   0:3903775176ed
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     a
   
 
 Non-blocking hook
 -----------------
 
   $ cat << EOF >> .hg/hgrc
   > [hooks]
   > pretxnclose.testing=echo pre-txnclose hook called
   > EOF
   $ touch b && hg commit -Aqm a
   transaction abort!
   rollback completed
   abort: untrusted hook pretxnclose.testing not executed
   (see 'hg help config.trusted')
   [255]
   $ hg log
   changeset:   0:3903775176ed
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     a
   

tests/test-http-bundle1.t

@@ -1,347 +1,347
 #require serve
 
 This test is a duplicate of 'test-http.t', feel free to factor out
 parts that are not bundle1/bundle2 specific.
 
   $ cat << EOF >> $HGRCPATH
   > [devel]
   > # This test is dedicated to interaction through old bundle
   > legacy.exchange = bundle1
   > EOF
 
   $ hg init test
   $ cd test
   $ echo foo>foo
   $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
   $ echo foo>foo.d/foo
   $ echo bar>foo.d/bAr.hg.d/BaR
   $ echo bar>foo.d/baR.d.hg/bAR
   $ hg commit -A -m 1
   adding foo
   adding foo.d/bAr.hg.d/BaR
   adding foo.d/baR.d.hg/bAR
   adding foo.d/foo
   $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
   $ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid
 
 Test server address cannot be reused
 
 #if windows
   $ hg serve -p $HGPORT1 2>&1
   abort: cannot start server at 'localhost:$HGPORT1': * (glob)
   [255]
 #else
   $ hg serve -p $HGPORT1 2>&1
   abort: cannot start server at 'localhost:$HGPORT1': Address already in use
   [255]
 #endif
   $ cd ..
   $ cat hg1.pid hg2.pid >> $DAEMON_PIDS
 
 clone via stream
 
   $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
   streaming all changes
   6 files to transfer, 606 bytes of data
   transferred * bytes in * seconds (*/sec) (glob)
   searching for changes
   no changes found
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg verify -R copy
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   4 files, 1 changesets, 4 total revisions
 
 try to clone via stream, should use pull instead
 
   $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 clone via pull
 
   $ hg clone http://localhost:$HGPORT1/ copy-pull
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg verify -R copy-pull
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   4 files, 1 changesets, 4 total revisions
   $ cd test
   $ echo bar > bar
   $ hg commit -A -d '1 0' -m 2
   adding bar
   $ cd ..
 
 clone over http with --update
 
   $ hg clone http://localhost:$HGPORT1/ updated --update 0
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 5 changes to 5 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -r . -R updated
   changeset:   0:8b6053c928fe
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ rm -rf updated
 
 incoming via HTTP
 
   $ hg clone http://localhost:$HGPORT1/ --rev 0 partial
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd partial
   $ touch LOCAL
   $ hg ci -qAm LOCAL
   $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
   comparing with http://localhost:$HGPORT1/
   searching for changes
   2
   $ cd ..
 
 pull
 
   $ cd copy-pull
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup"
   > EOF
   $ hg pull
   pulling from http://localhost:$HGPORT1/
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
-  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT1/
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT1/
   (run 'hg update' to get a working copy)
   $ cd ..
 
 clone from invalid URL
 
   $ hg clone http://localhost:$HGPORT/bad
   abort: HTTP Error 404: Not Found
   [255]
 
 test http authentication
 + use the same server to test server side streaming preference
 
   $ cd test
   $ cat << EOT > userpass.py
   > import base64
   > from mercurial.hgweb import common
   > def perform_authentication(hgweb, req, op):
   >     auth = req.env.get('HTTP_AUTHORIZATION')
   >     if not auth:
   >         raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
   >                 [('WWW-Authenticate', 'Basic Realm="mercurial"')])
   >     if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
   >         raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
   > def extsetup():
   >     common.permhooks.insert(0, perform_authentication)
   > EOT
   $ hg serve --config extensions.x=userpass.py -p $HGPORT2 -d --pid-file=pid \
   >    --config server.preferuncompressed=True \
   >    --config web.push_ssl=False --config web.allow_push=* -A ../access.log
   $ cat pid >> $DAEMON_PIDS
 
   $ cat << EOF > get_pass.py
   > import getpass
   > def newgetpass(arg):
   >   return "pass"
   > getpass.getpass = newgetpass
   > EOF
 
   $ hg id http://localhost:$HGPORT2/
   abort: http authorization required for http://localhost:$HGPORT2/
   [255]
   $ hg id http://localhost:$HGPORT2/
   abort: http authorization required for http://localhost:$HGPORT2/
   [255]
   $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
   http authorization required for http://localhost:$HGPORT2/
   realm: mercurial
   user: user
   password: 5fed3813f7f5
   $ hg id http://user:pass@localhost:$HGPORT2/
   5fed3813f7f5
   $ echo '[auth]' >> .hg/hgrc
   $ echo 'l.schemes=http' >> .hg/hgrc
   $ echo 'l.prefix=lo' >> .hg/hgrc
   $ echo 'l.username=user' >> .hg/hgrc
   $ echo 'l.password=pass' >> .hg/hgrc
   $ hg id http://localhost:$HGPORT2/
   5fed3813f7f5
   $ hg id http://localhost:$HGPORT2/
   5fed3813f7f5
   $ hg id http://user@localhost:$HGPORT2/
   5fed3813f7f5
   $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
   streaming all changes
   7 files to transfer, 916 bytes of data
   transferred * bytes in * seconds (*/sec) (glob)
   searching for changes
   no changes found
   updating to branch default
   5 files updated, 0 files merged, 0 files removed, 0 files unresolved
 --pull should override server's preferuncompressed
   $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 5 changes to 5 files
   updating to branch default
   5 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg id http://user2@localhost:$HGPORT2/
   abort: http authorization required for http://localhost:$HGPORT2/
   [255]
   $ hg id http://user:pass2@localhost:$HGPORT2/
   abort: HTTP Error 403: no
   [255]
 
   $ hg -R dest tag -r tip top
   $ hg -R dest push http://user:pass@localhost:$HGPORT2/
   pushing to http://user:***@localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   $ hg rollback -q
 
   $ sed 's/.*] "/"/' < ../access.log
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=stream_out HTTP/1.1" 401 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524* (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
 
   $ cd ..
 
 clone of serve with repo in root and unserved subrepo (issue2970)
 
   $ hg --cwd test init sub
   $ echo empty > test/sub/empty
   $ hg --cwd test/sub add empty
   $ hg --cwd test/sub commit -qm 'add empty'
   $ hg --cwd test/sub tag -r 0 something
   $ echo sub = sub > test/.hgsub
   $ hg --cwd test add .hgsub
   $ hg --cwd test commit -qm 'add subrepo'
   $ hg clone http://localhost:$HGPORT noslash-clone
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 7 changes to 7 files
   updating to branch default
   abort: HTTP Error 404: Not Found
   [255]
   $ hg clone http://localhost:$HGPORT/ slash-clone
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 7 changes to 7 files
   updating to branch default
   abort: HTTP Error 404: Not Found
   [255]
 
 check error log
 
   $ cat error.log
 
 Check error reporting while pulling/cloning
 
   $ $RUNTESTDIR/killdaemons.py
   $ hg -R test serve -p $HGPORT -d --pid-file=hg3.pid -E error.log --config extensions.crash=${TESTDIR}/crashgetbundler.py
   $ cat hg3.pid >> $DAEMON_PIDS
   $ hg clone http://localhost:$HGPORT/ abort-clone
   requesting all changes
   abort: remote error:
   this is an exercise
   [255]
   $ cat error.log

tests/test-http.t

@@ -1,335 +1,335
 #require serve
 
   $ hg init test
   $ cd test
   $ echo foo>foo
   $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
   $ echo foo>foo.d/foo
   $ echo bar>foo.d/bAr.hg.d/BaR
   $ echo bar>foo.d/baR.d.hg/bAR
   $ hg commit -A -m 1
   adding foo
   adding foo.d/bAr.hg.d/BaR
   adding foo.d/baR.d.hg/bAR
   adding foo.d/foo
   $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
   $ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid
 
 Test server address cannot be reused
 
 #if windows
   $ hg serve -p $HGPORT1 2>&1
   abort: cannot start server at ':$HGPORT1': * (glob)
   [255]
 #else
   $ hg serve -p $HGPORT1 2>&1
   abort: cannot start server at 'localhost:$HGPORT1': Address already in use
   [255]
 #endif
   $ cd ..
   $ cat hg1.pid hg2.pid >> $DAEMON_PIDS
 
 clone via stream
 
   $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
   streaming all changes
   6 files to transfer, 606 bytes of data
   transferred * bytes in * seconds (*/sec) (glob)
   searching for changes
   no changes found
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg verify -R copy
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   4 files, 1 changesets, 4 total revisions
 
 try to clone via stream, should use pull instead
 
   $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 clone via pull
 
   $ hg clone http://localhost:$HGPORT1/ copy-pull
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg verify -R copy-pull
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   4 files, 1 changesets, 4 total revisions
   $ cd test
   $ echo bar > bar
   $ hg commit -A -d '1 0' -m 2
   adding bar
   $ cd ..
 
 clone over http with --update
 
   $ hg clone http://localhost:$HGPORT1/ updated --update 0
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 5 changes to 5 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -r . -R updated
   changeset:   0:8b6053c928fe
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ rm -rf updated
 
 incoming via HTTP
 
   $ hg clone http://localhost:$HGPORT1/ --rev 0 partial
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd partial
   $ touch LOCAL
   $ hg ci -qAm LOCAL
   $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
   comparing with http://localhost:$HGPORT1/
   searching for changes
   2
   $ cd ..
 
 pull
 
   $ cd copy-pull
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup"
   > EOF
   $ hg pull
   pulling from http://localhost:$HGPORT1/
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
-  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT1/
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT1/
   (run 'hg update' to get a working copy)
   $ cd ..
 
 clone from invalid URL
 
   $ hg clone http://localhost:$HGPORT/bad
   abort: HTTP Error 404: Not Found
   [255]
 
 test http authentication
 + use the same server to test server side streaming preference
 
   $ cd test
   $ cat << EOT > userpass.py
   > import base64
   > from mercurial.hgweb import common
   > def perform_authentication(hgweb, req, op):
   >     auth = req.env.get('HTTP_AUTHORIZATION')
   >     if not auth:
   >         raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
   >                 [('WWW-Authenticate', 'Basic Realm="mercurial"')])
   >     if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
   >         raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
   > def extsetup():
   >     common.permhooks.insert(0, perform_authentication)
   > EOT
   $ hg serve --config extensions.x=userpass.py -p $HGPORT2 -d --pid-file=pid \
   >    --config server.preferuncompressed=True \
   >    --config web.push_ssl=False --config web.allow_push=* -A ../access.log
   $ cat pid >> $DAEMON_PIDS
 
   $ cat << EOF > get_pass.py
   > import getpass
   > def newgetpass(arg):
   >   return "pass"
   > getpass.getpass = newgetpass
   > EOF
 
   $ hg id http://localhost:$HGPORT2/
   abort: http authorization required for http://localhost:$HGPORT2/
   [255]
   $ hg id http://localhost:$HGPORT2/
   abort: http authorization required for http://localhost:$HGPORT2/
   [255]
   $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
   http authorization required for http://localhost:$HGPORT2/
   realm: mercurial
   user: user
   password: 5fed3813f7f5
   $ hg id http://user:pass@localhost:$HGPORT2/
   5fed3813f7f5
   $ echo '[auth]' >> .hg/hgrc
   $ echo 'l.schemes=http' >> .hg/hgrc
   $ echo 'l.prefix=lo' >> .hg/hgrc
   $ echo 'l.username=user' >> .hg/hgrc
   $ echo 'l.password=pass' >> .hg/hgrc
   $ hg id http://localhost:$HGPORT2/
   5fed3813f7f5
   $ hg id http://localhost:$HGPORT2/
   5fed3813f7f5
   $ hg id http://user@localhost:$HGPORT2/
   5fed3813f7f5
   $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
   streaming all changes
   7 files to transfer, 916 bytes of data
   transferred * bytes in * seconds (*/sec) (glob)
   searching for changes
   no changes found
   updating to branch default
   5 files updated, 0 files merged, 0 files removed, 0 files unresolved
 --pull should override server's preferuncompressed
   $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 5 changes to 5 files
   updating to branch default
   5 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg id http://user2@localhost:$HGPORT2/
   abort: http authorization required for http://localhost:$HGPORT2/
   [255]
   $ hg id http://user:pass2@localhost:$HGPORT2/
   abort: HTTP Error 403: no
   [255]
 
   $ hg -R dest tag -r tip top
   $ hg -R dest push http://user:pass@localhost:$HGPORT2/
   pushing to http://user:***@localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   $ hg rollback -q
 
   $ sed 's/.*] "/"/' < ../access.log
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=stream_out HTTP/1.1" 401 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=0&common=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phases%2Cbookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=getbundle HTTP/1.1" 401 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phases%2Cbookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phases%2Cbookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
   "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=666f726365* (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
 
   $ cd ..
 
 clone of serve with repo in root and unserved subrepo (issue2970)
 
   $ hg --cwd test init sub
   $ echo empty > test/sub/empty
   $ hg --cwd test/sub add empty
   $ hg --cwd test/sub commit -qm 'add empty'
   $ hg --cwd test/sub tag -r 0 something
   $ echo sub = sub > test/.hgsub
   $ hg --cwd test add .hgsub
   $ hg --cwd test commit -qm 'add subrepo'
   $ hg clone http://localhost:$HGPORT noslash-clone
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 7 changes to 7 files
   updating to branch default
   abort: HTTP Error 404: Not Found
   [255]
   $ hg clone http://localhost:$HGPORT/ slash-clone
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 7 changes to 7 files
   updating to branch default
   abort: HTTP Error 404: Not Found
   [255]
 
 check error log
 
   $ cat error.log
 
 check abort error reporting while pulling/cloning
 
   $ $RUNTESTDIR/killdaemons.py
   $ hg -R test serve -p $HGPORT -d --pid-file=hg3.pid -E error.log --config extensions.crash=${TESTDIR}/crashgetbundler.py
   $ cat hg3.pid >> $DAEMON_PIDS
   $ hg clone http://localhost:$HGPORT/ abort-clone
   requesting all changes
   remote: abort: this is an exercise
   abort: pull failed on remote
   [255]
   $ cat error.log

tests/test-https.t

@@ -1,644 +1,644
 #require serve ssl
 
 Proper https client requires the built-in ssl from Python 2.6.
 
 Make server certificates:
 
   $ CERTSDIR="$TESTDIR/sslcerts"
   $ cat "$CERTSDIR/priv.pem" "$CERTSDIR/pub.pem" >> server.pem
   $ PRIV=`pwd`/server.pem
   $ cat "$CERTSDIR/priv.pem" "$CERTSDIR/pub-not-yet.pem" > server-not-yet.pem
   $ cat "$CERTSDIR/priv.pem" "$CERTSDIR/pub-expired.pem" > server-expired.pem
 
   $ hg init test
   $ cd test
   $ echo foo>foo
   $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
   $ echo foo>foo.d/foo
   $ echo bar>foo.d/bAr.hg.d/BaR
   $ echo bar>foo.d/baR.d.hg/bAR
   $ hg commit -A -m 1
   adding foo
   adding foo.d/bAr.hg.d/BaR
   adding foo.d/baR.d.hg/bAR
   adding foo.d/foo
   $ hg serve -p $HGPORT -d --pid-file=../hg0.pid --certificate=$PRIV
   $ cat ../hg0.pid >> $DAEMON_PIDS
 
 cacert not found
 
   $ hg in --config web.cacerts=no-such.pem https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: could not find web.cacerts: no-such.pem
   [255]
 
 Test server address cannot be reused
 
 #if windows
   $ hg serve -p $HGPORT --certificate=$PRIV 2>&1
   abort: cannot start server at 'localhost:$HGPORT':
   [255]
 #else
   $ hg serve -p $HGPORT --certificate=$PRIV 2>&1
   abort: cannot start server at 'localhost:$HGPORT': Address already in use
   [255]
 #endif
   $ cd ..
 
 Our test cert is not signed by a trusted CA. It should fail to verify if
 we are able to load CA certs.
 
 #if sslcontext defaultcacerts no-defaultcacertsloaded
   $ hg clone https://localhost:$HGPORT/ copy-pull
   (an attempt was made to load CA certificates but none were loaded; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error)
   abort: error: *certificate verify failed* (glob)
   [255]
 #endif
 
 #if no-sslcontext defaultcacerts
   $ hg clone https://localhost:$HGPORT/ copy-pull
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (using CA certificates from *; if you see this message, your Mercurial install is not properly configured; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message) (glob) (?)
   abort: error: *certificate verify failed* (glob)
   [255]
 #endif
 
 #if no-sslcontext windows
   $ hg clone https://localhost:$HGPORT/ copy-pull
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
   (unable to load Windows CA certificates; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message)
   abort: error: *certificate verify failed* (glob)
   [255]
 #endif
 
 #if no-sslcontext osx
   $ hg clone https://localhost:$HGPORT/ copy-pull
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
   (unable to load CA certificates; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message)
   abort: localhost certificate error: no certificate received
   (set hostsecurity.localhost:certfingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e config setting or use --insecure to connect insecurely)
   [255]
 #endif
 
 #if defaultcacertsloaded
   $ hg clone https://localhost:$HGPORT/ copy-pull
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (using CA certificates from *; if you see this message, your Mercurial install is not properly configured; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message) (glob) (?)
   abort: error: *certificate verify failed* (glob)
   [255]
 #endif
 
 #if no-defaultcacerts
   $ hg clone https://localhost:$HGPORT/ copy-pull
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (unable to load * certificates; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message) (glob) (?)
   abort: localhost certificate error: no certificate received
   (set hostsecurity.localhost:certfingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e config setting or use --insecure to connect insecurely)
   [255]
 #endif
 
 Specifying a per-host certificate file that doesn't exist will abort
 
   $ hg --config hostsecurity.localhost:verifycertsfile=/does/not/exist clone https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: path specified by hostsecurity.localhost:verifycertsfile does not exist: /does/not/exist
   [255]
 
 A malformed per-host certificate file will raise an error
 
   $ echo baddata > badca.pem
 #if sslcontext
   $ hg --config hostsecurity.localhost:verifycertsfile=badca.pem clone https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error loading CA file badca.pem: * (glob)
   (file is empty or malformed?)
   [255]
 #else
   $ hg --config hostsecurity.localhost:verifycertsfile=badca.pem clone https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: * (glob)
   [255]
 #endif
 
 A per-host certificate mismatching the server will fail verification
 
 (modern ssl is able to discern whether the loaded cert is a CA cert)
 #if sslcontext
   $ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/client-cert.pem" clone https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (an attempt was made to load CA certificates but none were loaded; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error)
   abort: error: *certificate verify failed* (glob)
   [255]
 #else
   $ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/client-cert.pem" clone https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: *certificate verify failed* (glob)
   [255]
 #endif
 
 A per-host certificate matching the server's cert will be accepted
 
   $ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/pub.pem" clone -U https://localhost:$HGPORT/ perhostgood1
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
 
 A per-host certificate with multiple certs and one matching will be accepted
 
   $ cat "$CERTSDIR/client-cert.pem" "$CERTSDIR/pub.pem" > perhost.pem
   $ hg --config hostsecurity.localhost:verifycertsfile=perhost.pem clone -U https://localhost:$HGPORT/ perhostgood2
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
 
 Defining both per-host certificate and a fingerprint will print a warning
 
   $ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/pub.pem" --config hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03 clone -U https://localhost:$HGPORT/ caandfingerwarning
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (hostsecurity.localhost:verifycertsfile ignored when host fingerprints defined; using host fingerprints for verification)
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
 
   $ DISABLECACERTS="--config devel.disableloaddefaultcerts=true"
 
 Inability to verify peer certificate will result in abort
 
   $ hg clone https://localhost:$HGPORT/ copy-pull $DISABLECACERTS
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: unable to verify security of localhost (no loaded CA certificates); refusing to connect
   (see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error or set hostsecurity.localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e to trust this server)
   [255]
 
   $ hg clone --insecure https://localhost:$HGPORT/ copy-pull
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 4 changes to 4 files
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg verify -R copy-pull
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   4 files, 1 changesets, 4 total revisions
   $ cd test
   $ echo bar > bar
   $ hg commit -A -d '1 0' -m 2
   adding bar
   $ cd ..
 
 pull without cacert
 
   $ cd copy-pull
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup"
   > EOF
   $ hg pull $DISABLECACERTS
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: unable to verify security of localhost (no loaded CA certificates); refusing to connect
   (see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error or set hostsecurity.localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e to trust this server)
   [255]
 
   $ hg pull --insecure
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
-  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=https://localhost:$HGPORT/
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=https://localhost:$HGPORT/
   (run 'hg update' to get a working copy)
   $ cd ..
 
 cacert configured in local repo
 
   $ cp copy-pull/.hg/hgrc copy-pull/.hg/hgrc.bu
   $ echo "[web]" >> copy-pull/.hg/hgrc
   $ echo "cacerts=$CERTSDIR/pub.pem" >> copy-pull/.hg/hgrc
   $ hg -R copy-pull pull
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   searching for changes
   no changes found
   $ mv copy-pull/.hg/hgrc.bu copy-pull/.hg/hgrc
 
 cacert configured globally, also testing expansion of environment
 variables in the filename
 
   $ echo "[web]" >> $HGRCPATH
   $ echo 'cacerts=$P/pub.pem' >> $HGRCPATH
   $ P="$CERTSDIR" hg -R copy-pull pull
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   searching for changes
   no changes found
   $ P="$CERTSDIR" hg -R copy-pull pull --insecure
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
   searching for changes
   no changes found
 
 empty cacert file
 
   $ touch emptycafile
 
 #if sslcontext
   $ hg --config web.cacerts=emptycafile -R copy-pull pull
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error loading CA file emptycafile: * (glob)
   (file is empty or malformed?)
   [255]
 #else
   $ hg --config web.cacerts=emptycafile -R copy-pull pull
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: * (glob)
   [255]
 #endif
 
 cacert mismatch
 
   $ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub.pem" \
   > https://$LOCALIP:$HGPORT/
   pulling from https://*:$HGPORT/ (glob)
   warning: connecting to $LOCALIP using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: $LOCALIP certificate error: certificate is for localhost
   (set hostsecurity.$LOCALIP:certfingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e config setting or use --insecure to connect insecurely)
   [255]
   $ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub.pem" \
   > https://$LOCALIP:$HGPORT/ --insecure
   pulling from https://*:$HGPORT/ (glob)
   warning: connecting to $LOCALIP using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   warning: connection security to $LOCALIP is disabled per current settings; communication is susceptible to eavesdropping and tampering
   searching for changes
   no changes found
   $ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-other.pem"
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: *certificate verify failed* (glob)
   [255]
   $ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-other.pem" \
   > --insecure
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
   searching for changes
   no changes found
 
 Test server cert which isn't valid yet
 
   $ hg serve -R test -p $HGPORT1 -d --pid-file=hg1.pid --certificate=server-not-yet.pem
   $ cat hg1.pid >> $DAEMON_PIDS
   $ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-not-yet.pem" \
   > https://localhost:$HGPORT1/
   pulling from https://localhost:$HGPORT1/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: *certificate verify failed* (glob)
   [255]
 
 Test server cert which no longer is valid
 
   $ hg serve -R test -p $HGPORT2 -d --pid-file=hg2.pid --certificate=server-expired.pem
   $ cat hg2.pid >> $DAEMON_PIDS
   $ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-expired.pem" \
   > https://localhost:$HGPORT2/
   pulling from https://localhost:$HGPORT2/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: *certificate verify failed* (glob)
   [255]
 
 Disabling the TLS 1.0 warning works
   $ hg -R copy-pull id https://localhost:$HGPORT/ \
   > --config hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03 \
   > --config hostsecurity.disabletls10warning=true
   5fed3813f7f5
 
 #if no-sslcontext no-py27+
 Setting ciphers doesn't work in Python 2.6
   $ P="$CERTSDIR" hg --config hostsecurity.ciphers=HIGH -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
   abort: setting ciphers in [hostsecurity] is not supported by this version of Python
   (remove the config option or run Mercurial with a modern Python version (preferred))
   [255]
 #endif
 
 Setting ciphers works in Python 2.7+ but the error message is different on
 legacy ssl. We test legacy once and do more feature checking on modern
 configs.
 
 #if py27+ no-sslcontext
   $ P="$CERTSDIR" hg --config hostsecurity.ciphers=invalid -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
   abort: *No cipher can be selected. (glob)
   [255]
 
   $ P="$CERTSDIR" hg --config hostsecurity.ciphers=HIGH -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
   5fed3813f7f5
 #endif
 
 #if sslcontext
 Setting ciphers to an invalid value aborts
   $ P="$CERTSDIR" hg --config hostsecurity.ciphers=invalid -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: could not set ciphers: No cipher can be selected.
   (change cipher string (invalid) in config)
   [255]
 
   $ P="$CERTSDIR" hg --config hostsecurity.localhost:ciphers=invalid -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: could not set ciphers: No cipher can be selected.
   (change cipher string (invalid) in config)
   [255]
 
 Changing the cipher string works
 
   $ P="$CERTSDIR" hg --config hostsecurity.ciphers=HIGH -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   5fed3813f7f5
 #endif
 
 Fingerprints
 
 - works without cacerts (hostfingerprints)
   $ hg -R copy-pull id https://localhost:$HGPORT/ --insecure --config hostfingerprints.localhost=ec:d8:7c:d6:b3:86:d0:4f:c1:b8:b4:1c:9d:8f:5e:16:8e:ef:1c:03
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, set the following config value in [hostsecurity] and remove the old one from [hostfingerprints] to upgrade to a more secure SHA-256 fingerprint: localhost.fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
   5fed3813f7f5
 
 - works without cacerts (hostsecurity)
   $ hg -R copy-pull id https://localhost:$HGPORT/ --config hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   5fed3813f7f5
 
   $ hg -R copy-pull id https://localhost:$HGPORT/ --config hostsecurity.localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   5fed3813f7f5
 
 - multiple fingerprints specified and first matches
   $ hg --config 'hostfingerprints.localhost=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03, deadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/ --insecure
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, set the following config value in [hostsecurity] and remove the old one from [hostfingerprints] to upgrade to a more secure SHA-256 fingerprint: localhost.fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
   5fed3813f7f5
 
   $ hg --config 'hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03, sha1:deadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   5fed3813f7f5
 
 - multiple fingerprints specified and last matches
   $ hg --config 'hostfingerprints.localhost=deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03' -R copy-pull id https://localhost:$HGPORT/ --insecure
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, set the following config value in [hostsecurity] and remove the old one from [hostfingerprints] to upgrade to a more secure SHA-256 fingerprint: localhost.fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
   5fed3813f7f5
 
   $ hg --config 'hostsecurity.localhost:fingerprints=sha1:deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03' -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   5fed3813f7f5
 
 - multiple fingerprints specified and none match
 
   $ hg --config 'hostfingerprints.localhost=deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, aeadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/ --insecure
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: certificate for localhost has unexpected fingerprint ec:d8:7c:d6:b3:86:d0:4f:c1:b8:b4:1c:9d:8f:5e:16:8e:ef:1c:03
   (check hostfingerprint configuration)
   [255]
 
   $ hg --config 'hostsecurity.localhost:fingerprints=sha1:deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, sha1:aeadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: certificate for localhost has unexpected fingerprint sha1:ec:d8:7c:d6:b3:86:d0:4f:c1:b8:b4:1c:9d:8f:5e:16:8e:ef:1c:03
   (check hostsecurity configuration)
   [255]
 
 - fails when cert doesn't match hostname (port is ignored)
   $ hg -R copy-pull id https://localhost:$HGPORT1/ --config hostfingerprints.localhost=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: certificate for localhost has unexpected fingerprint f4:2f:5a:0c:3e:52:5b:db:e7:24:a8:32:1d:18:97:6d:69:b5:87:84
   (check hostfingerprint configuration)
   [255]
 
 
 - ignores that certificate doesn't match hostname
   $ hg -R copy-pull id https://$LOCALIP:$HGPORT/ --config hostfingerprints.$LOCALIP=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03
   warning: connecting to $LOCALIP using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (SHA-1 fingerprint for $LOCALIP found in legacy [hostfingerprints] section; if you trust this fingerprint, set the following config value in [hostsecurity] and remove the old one from [hostfingerprints] to upgrade to a more secure SHA-256 fingerprint: $LOCALIP.fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
   5fed3813f7f5
 
 Ports used by next test. Kill servers.
 
   $ killdaemons.py hg0.pid
   $ killdaemons.py hg1.pid
   $ killdaemons.py hg2.pid
 
 #if sslcontext tls1.2
 Start servers running supported TLS versions
 
   $ cd test
   $ hg serve -p $HGPORT -d --pid-file=../hg0.pid --certificate=$PRIV \
   > --config devel.serverexactprotocol=tls1.0
   $ cat ../hg0.pid >> $DAEMON_PIDS
   $ hg serve -p $HGPORT1 -d --pid-file=../hg1.pid --certificate=$PRIV \
   > --config devel.serverexactprotocol=tls1.1
   $ cat ../hg1.pid >> $DAEMON_PIDS
   $ hg serve -p $HGPORT2 -d --pid-file=../hg2.pid --certificate=$PRIV \
   > --config devel.serverexactprotocol=tls1.2
   $ cat ../hg2.pid >> $DAEMON_PIDS
   $ cd ..
 
 Clients talking same TLS versions work
 
   $ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.0 id https://localhost:$HGPORT/
   5fed3813f7f5
   $ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.1 id https://localhost:$HGPORT1/
   5fed3813f7f5
   $ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.2 id https://localhost:$HGPORT2/
   5fed3813f7f5
 
 Clients requiring newer TLS version than what server supports fail
 
   $ P="$CERTSDIR" hg id https://localhost:$HGPORT/
   (could not negotiate a common security protocol (tls1.1+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
   (consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
   (see https://mercurial-scm.org/wiki/SecureConnections for more info)
   abort: error: *unsupported protocol* (glob)
   [255]
 
   $ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.1 id https://localhost:$HGPORT/
   (could not negotiate a common security protocol (tls1.1+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
   (consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
   (see https://mercurial-scm.org/wiki/SecureConnections for more info)
   abort: error: *unsupported protocol* (glob)
   [255]
   $ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.2 id https://localhost:$HGPORT/
   (could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
   (consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
   (see https://mercurial-scm.org/wiki/SecureConnections for more info)
   abort: error: *unsupported protocol* (glob)
   [255]
   $ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.2 id https://localhost:$HGPORT1/
   (could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
   (consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
   (see https://mercurial-scm.org/wiki/SecureConnections for more info)
   abort: error: *unsupported protocol* (glob)
   [255]
 
 --insecure will allow TLS 1.0 connections and override configs
 
   $ hg --config hostsecurity.minimumprotocol=tls1.2 id --insecure https://localhost:$HGPORT1/
   warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
   5fed3813f7f5
 
 The per-host config option overrides the default
 
   $ P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
   > --config hostsecurity.minimumprotocol=tls1.2 \
   > --config hostsecurity.localhost:minimumprotocol=tls1.0
   5fed3813f7f5
 
 The per-host config option by itself works
 
   $ P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
   > --config hostsecurity.localhost:minimumprotocol=tls1.2
   (could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
   (consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
   (see https://mercurial-scm.org/wiki/SecureConnections for more info)
   abort: error: *unsupported protocol* (glob)
   [255]
 
 .hg/hgrc file [hostsecurity] settings are applied to remote ui instances (issue5305)
 
   $ cat >> copy-pull/.hg/hgrc << EOF
   > [hostsecurity]
   > localhost:minimumprotocol=tls1.2
   > EOF
   $ P="$CERTSDIR" hg -R copy-pull id https://localhost:$HGPORT/
   (could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
   (consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
   (see https://mercurial-scm.org/wiki/SecureConnections for more info)
   abort: error: *unsupported protocol* (glob)
   [255]
 
   $ killdaemons.py hg0.pid
   $ killdaemons.py hg1.pid
   $ killdaemons.py hg2.pid
 #endif
 
 Prepare for connecting through proxy
 
   $ hg serve -R test -p $HGPORT -d --pid-file=hg0.pid --certificate=$PRIV
   $ cat hg0.pid >> $DAEMON_PIDS
   $ hg serve -R test -p $HGPORT2 -d --pid-file=hg2.pid --certificate=server-expired.pem
   $ cat hg2.pid >> $DAEMON_PIDS
 tinyproxy.py doesn't fully detach, so killing it may result in extra output
 from the shell. So don't kill it.
   $ tinyproxy.py $HGPORT1 localhost >proxy.log </dev/null 2>&1 &
   $ while [ ! -f proxy.pid ]; do sleep 0; done
   $ cat proxy.pid >> $DAEMON_PIDS
 
   $ echo "[http_proxy]" >> copy-pull/.hg/hgrc
   $ echo "always=True" >> copy-pull/.hg/hgrc
   $ echo "[hostfingerprints]" >> copy-pull/.hg/hgrc
   $ echo "localhost =" >> copy-pull/.hg/hgrc
 
 Test unvalidated https through proxy
 
   $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull --insecure
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
   searching for changes
   no changes found
 
 Test https with cacert and fingerprint through proxy
 
   $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull \
   > --config web.cacerts="$CERTSDIR/pub.pem"
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   searching for changes
   no changes found
   $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull https://localhost:$HGPORT/ --config hostfingerprints.localhost=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03 --trace
   pulling from https://*:$HGPORT/ (glob)
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   (SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, set the following config value in [hostsecurity] and remove the old one from [hostfingerprints] to upgrade to a more secure SHA-256 fingerprint: localhost.fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
   searching for changes
   no changes found
 
 Test https with cert problems through proxy
 
   $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull \
   > --config web.cacerts="$CERTSDIR/pub-other.pem"
   pulling from https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: *certificate verify failed* (glob)
   [255]
   $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull \
   > --config web.cacerts="$CERTSDIR/pub-expired.pem" https://localhost:$HGPORT2/
   pulling from https://localhost:$HGPORT2/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: *certificate verify failed* (glob)
   [255]
 
 
   $ killdaemons.py hg0.pid
 
 #if sslcontext
 
 Start hgweb that requires client certificates:
 
   $ cd test
   $ hg serve -p $HGPORT -d --pid-file=../hg0.pid --certificate=$PRIV \
   > --config devel.servercafile=$PRIV --config devel.serverrequirecert=true
   $ cat ../hg0.pid >> $DAEMON_PIDS
   $ cd ..
 
 without client certificate:
 
   $ P="$CERTSDIR" hg id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: *handshake failure* (glob)
   [255]
 
 with client certificate:
 
   $ cat << EOT >> $HGRCPATH
   > [auth]
   > l.prefix = localhost
   > l.cert = $CERTSDIR/client-cert.pem
   > l.key = $CERTSDIR/client-key.pem
   > EOT
 
   $ P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
   > --config auth.l.key="$CERTSDIR/client-key-decrypted.pem"
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   5fed3813f7f5
 
   $ printf '1234\n' | env P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
   > --config ui.interactive=True --config ui.nontty=True
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   passphrase for */client-key.pem: 5fed3813f7f5 (glob)
 
   $ env P="$CERTSDIR" hg id https://localhost:$HGPORT/
   warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
   abort: error: * (glob)
   [255]
 
 #endif

tests/test-push-http-bundle1.t

@@ -1,203 +1,203
 #require killdaemons
 
 This test checks behavior related to bundle1 that changed or is likely
 to change with bundle2. Feel free to factor out any part of the test
 which does not need to exist to keep bundle1 working.
 
   $ cat << EOF >> $HGRCPATH
   > [devel]
   > # This test is dedicated to interaction through old bundle
   > legacy.exchange = bundle1
   > EOF
 
   $ hg init test
   $ cd test
   $ echo a > a
   $ hg ci -Ama
   adding a
   $ cd ..
   $ hg clone test test2
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd test2
   $ echo a >> a
   $ hg ci -mb
   $ req() {
   >     hg serve -p $HGPORT -d --pid-file=hg.pid -E errors.log
   >     cat hg.pid >> $DAEMON_PIDS
   >     hg --cwd ../test2 push http://localhost:$HGPORT/
   >     exitstatus=$?
   >     killdaemons.py
   >     echo % serve errors
   >     cat errors.log
   >     return $exitstatus
   > }
   $ cd ../test
 
 expect ssl error
 
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: HTTP Error 403: ssl required
   % serve errors
   [255]
 
 expect authorization error
 
   $ echo '[web]' > .hg/hgrc
   $ echo 'push_ssl = false' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
 expect authorization error: must have authorized user
 
   $ echo 'allow_push = unperson' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
 expect success
 
   $ cat >> .hg/hgrc <<EOF
   > allow_push = *
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup 0"
   > pushkey = sh -c "printenv.py pushkey 0"
   > EOF
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: changegroup hook: HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect success, server lacks the httpheader capability
 
   $ CAP=httpheader
   $ . "$TESTDIR/notcapable"
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: changegroup hook: HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect success, server lacks the unbundlehash capability
 
   $ CAP=unbundlehash
   $ . "$TESTDIR/notcapable"
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: changegroup hook: HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect success, pre-d1b16a746db6 server supports the unbundle capability, but
 has no parameter
 
   $ cat <<EOF > notcapable-unbundleparam.py
   > from mercurial import extensions, httppeer
   > def capable(orig, self, name):
   >     if name == 'unbundle':
   >         return True
   >     return orig(self, name)
   > def uisetup(ui):
   >     extensions.wrapfunction(httppeer.httppeer, 'capable', capable)
   > EOF
   $ cp $HGRCPATH $HGRCPATH.orig
   $ cat <<EOF >> $HGRCPATH
   > [extensions]
   > notcapable-unbundleparam = `pwd`/notcapable-unbundleparam.py
   > EOF
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: changegroup hook: * (glob)
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
   $ mv $HGRCPATH.orig $HGRCPATH
 
 expect push success, phase change failure
 
   $ cat > .hg/hgrc <<EOF
   > [web]
   > push_ssl = false
   > allow_push = *
   > [hooks]
   > prepushkey = sh -c "printenv.py prepushkey 1"
   > EOF
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   % serve errors
 
 expect phase change success
 
   $ cat >> .hg/hgrc <<EOF
   > prepushkey = sh -c "printenv.py prepushkey 0"
   > EOF
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   no changes found
   % serve errors
   [1]
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect authorization error: all users denied
 
   $ echo '[web]' > .hg/hgrc
   $ echo 'push_ssl = false' >> .hg/hgrc
   $ echo 'deny_push = *' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
 expect authorization error: some users denied, users must be authenticated
 
   $ echo 'deny_push = unperson' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
   $ cd ..

tests/test-push-http.t

@@ -1,175 +1,175
 #require killdaemons
 
   $ hg init test
   $ cd test
   $ echo a > a
   $ hg ci -Ama
   adding a
   $ cd ..
   $ hg clone test test2
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd test2
   $ echo a >> a
   $ hg ci -mb
   $ req() {
   >     hg serve -p $HGPORT -d --pid-file=hg.pid -E errors.log
   >     cat hg.pid >> $DAEMON_PIDS
   >     hg --cwd ../test2 push http://localhost:$HGPORT/
   >     exitstatus=$?
   >     killdaemons.py
   >     echo % serve errors
   >     cat errors.log
   >     return $exitstatus
   > }
   $ cd ../test
 
 expect ssl error
 
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: HTTP Error 403: ssl required
   % serve errors
   [255]
 
 expect authorization error
 
   $ echo '[web]' > .hg/hgrc
   $ echo 'push_ssl = false' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
 expect authorization error: must have authorized user
 
   $ echo 'allow_push = unperson' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
 expect success
 
   $ cat >> .hg/hgrc <<EOF
   > allow_push = *
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup 0"
   > pushkey = sh -c "printenv.py pushkey 0"
   > EOF
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: pushkey hook: HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_OLD=1 HG_RET=1
-  remote: changegroup hook: HG_BUNDLE2=1 HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: pushkey hook: HG_HOOKTYPE=pushkey HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_OLD=1 HG_RET=1
+  remote: changegroup hook: HG_BUNDLE2=1 HG_HOOKTYPE=changegroup HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect success, server lacks the httpheader capability
 
   $ CAP=httpheader
   $ . "$TESTDIR/notcapable"
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: pushkey hook: HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_OLD=1 HG_RET=1
-  remote: changegroup hook: HG_BUNDLE2=1 HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: pushkey hook: HG_HOOKTYPE=pushkey HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_OLD=1 HG_RET=1
+  remote: changegroup hook: HG_BUNDLE2=1 HG_HOOKTYPE=changegroup HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect success, server lacks the unbundlehash capability
 
   $ CAP=unbundlehash
   $ . "$TESTDIR/notcapable"
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: pushkey hook: HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_OLD=1 HG_RET=1
-  remote: changegroup hook: HG_BUNDLE2=1 HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: pushkey hook: HG_HOOKTYPE=pushkey HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_OLD=1 HG_RET=1
+  remote: changegroup hook: HG_BUNDLE2=1 HG_HOOKTYPE=changegroup HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect push success, phase change failure
 
   $ cat > .hg/hgrc <<EOF
   > [web]
   > push_ssl = false
   > allow_push = *
   > [hooks]
   > prepushkey = sh -c "printenv.py prepushkey 1"
   > EOF
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: prepushkey hook: HG_BUNDLE2=1 HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_OLD=1 HG_PENDING=$TESTTMP/test HG_PHASES_MOVED=1 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: prepushkey hook: HG_BUNDLE2=1 HG_HOOKTYPE=prepushkey HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_OLD=1 HG_PENDING=$TESTTMP/test HG_PHASES_MOVED=1 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   remote: pushkey-abort: prepushkey hook exited with status 1
   remote: transaction abort!
   remote: rollback completed
   abort: updating ba677d0156c1 to public failed
   % serve errors
   [255]
 
 expect phase change success
 
   $ cat >> .hg/hgrc <<EOF
   > prepushkey = sh -c "printenv.py prepushkey 0"
   > EOF
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
-  remote: prepushkey hook: HG_BUNDLE2=1 HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_OLD=1 HG_PENDING=$TESTTMP/test HG_PHASES_MOVED=1 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
+  remote: prepushkey hook: HG_BUNDLE2=1 HG_HOOKTYPE=prepushkey HG_KEY=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NAMESPACE=phases HG_NEW=0 HG_NODE=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_NODE_LAST=ba677d0156c1196c1a699fa53f390dcfc3ce3872 HG_OLD=1 HG_PENDING=$TESTTMP/test HG_PHASES_MOVED=1 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:http:$LOCALIP:
   % serve errors
   $ hg rollback
   repository tip rolled back to revision 0 (undo serve)
 
 expect authorization error: all users denied
 
   $ echo '[web]' > .hg/hgrc
   $ echo 'push_ssl = false' >> .hg/hgrc
   $ echo 'deny_push = *' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
 expect authorization error: some users denied, users must be authenticated
 
   $ echo 'deny_push = unperson' >> .hg/hgrc
   $ req
   pushing to http://localhost:$HGPORT/
   searching for changes
   abort: authorization failed
   % serve errors
   [255]
 
   $ cd ..

tests/test-ssh-bundle1.t

@@ -1,562 +1,562
 This test is a duplicate of 'test-http.t' feel free to factor out
 parts that are not bundle1/bundle2 specific.
 
   $ cat << EOF >> $HGRCPATH
   > [devel]
   > # This test is dedicated to interaction through old bundle
   > legacy.exchange = bundle1
   > [format] # temporary settings
   > usegeneraldelta=yes
   > EOF
 
 
 This test tries to exercise the ssh functionality with a dummy script
 
 creating 'remote' repo
 
   $ hg init remote
   $ cd remote
   $ echo this > foo
   $ echo this > fooO
   $ hg ci -A -m "init" foo fooO
 
 insert a closed branch (issue4428)
 
   $ hg up null
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ hg branch closed
   marked working directory as branch closed
   (branches are permanent and global, did you want a bookmark?)
   $ hg ci -mc0
   $ hg ci --close-branch -mc1
   $ hg up -q default
 
 configure for serving
 
   $ cat <<EOF > .hg/hgrc
   > [server]
   > uncompressed = True
   > 
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup-in-remote 0 ../dummylog"
   > EOF
   $ cd ..
 
 repo not found error
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local
   remote: abort: repository nonexistent not found!
   abort: no suitable response from remote hg!
   [255]
 
 non-existent absolute path
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy//`pwd`/nonexistent local
   remote: abort: repository /$TESTTMP/nonexistent not found!
   abort: no suitable response from remote hg!
   [255]
 
 clone remote via stream
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/remote local-stream
   streaming all changes
   4 files to transfer, 602 bytes of data
   transferred 602 bytes in * seconds (*) (glob)
   searching for changes
   no changes found
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd local-stream
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 3 changesets, 2 total revisions
   $ hg branches
   default                        0:1160648e36ce
   $ cd ..
 
 clone bookmarks via stream
 
   $ hg -R local-stream book mybook
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/local-stream stream2
   streaming all changes
   4 files to transfer, 602 bytes of data
   transferred 602 bytes in * seconds (*) (glob)
   searching for changes
   no changes found
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd stream2
   $ hg book
      mybook                    0:1160648e36ce
   $ cd ..
   $ rm -rf local-stream stream2
 
 clone remote via pull
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 2 changes to 2 files
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 verify
 
   $ cd local
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 3 changesets, 2 total revisions
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup-in-local 0 ../dummylog"
   > EOF
 
 empty default pull
 
   $ hg paths
   default = ssh://user@dummy/remote
   $ hg pull -e "python \"$TESTDIR/dummyssh\""
   pulling from ssh://user@dummy/remote
   searching for changes
   no changes found
 
 pull from wrong ssh URL
 
   $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/doesnotexist
   pulling from ssh://user@dummy/doesnotexist
   remote: abort: repository doesnotexist not found!
   abort: no suitable response from remote hg!
   [255]
 
 local change
 
   $ echo bleah > foo
   $ hg ci -m "add"
 
 updating rc
 
   $ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
   $ echo "[ui]" >> .hg/hgrc
   $ echo "ssh = python \"$TESTDIR/dummyssh\"" >> .hg/hgrc
 
 find outgoing
 
   $ hg out ssh://user@dummy/remote
   comparing with ssh://user@dummy/remote
   searching for changes
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
 
 find incoming on the remote side
 
   $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/local
   comparing with ssh://user@dummy/local
   searching for changes
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
 
 find incoming on the remote side (using absolute path)
 
   $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`"
   comparing with ssh://user@dummy/$TESTTMP/local
   searching for changes
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
 
 push
 
   $ hg push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   $ cd ../remote
 
 check remote tip
 
   $ hg tip
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 4 changesets, 3 total revisions
   $ hg cat -r tip foo
   bleah
   $ echo z > z
   $ hg ci -A -m z z
   created new head
 
 test pushkeys and bookmarks
 
   $ cd ../local
   $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces
   bookmarks	
   namespaces	
   phases	
   $ hg book foo -r 0
   $ hg out -B
   comparing with ssh://user@dummy/remote
   searching for changed bookmarks
      foo                       1160648e36ce
   $ hg push -B foo
   pushing to ssh://user@dummy/remote
   searching for changes
   no changes found
   exporting bookmark foo
   [1]
   $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks
   foo	1160648e36cec0054048a7edc4110c6f84fde594
   $ hg book -f foo
   $ hg push --traceback
   pushing to ssh://user@dummy/remote
   searching for changes
   no changes found
   updating bookmark foo
   [1]
   $ hg book -d foo
   $ hg in -B
   comparing with ssh://user@dummy/remote
   searching for changed bookmarks
      foo                       a28a9d1a809c
   $ hg book -f -r 0 foo
   $ hg pull -B foo
   pulling from ssh://user@dummy/remote
   no changes found
   updating bookmark foo
   $ hg book -d foo
   $ hg push -B foo
   pushing to ssh://user@dummy/remote
   searching for changes
   no changes found
   deleting remote bookmark foo
   [1]
 
 a bad, evil hook that prints to stdout
 
   $ cat <<EOF > $TESTTMP/badhook
   > import sys
   > sys.stdout.write("KABOOM\n")
   > EOF
 
   $ echo '[hooks]' >> ../remote/.hg/hgrc
   $ echo "changegroup.stdout = python $TESTTMP/badhook" >> ../remote/.hg/hgrc
   $ echo r > r
   $ hg ci -A -m z r
 
 push should succeed even though it has an unexpected response
 
   $ hg push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote has heads on branch 'default' that are not known locally: 6c0482d977a3
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: KABOOM
   $ hg -R ../remote heads
   changeset:   5:1383141674ec
   tag:         tip
   parent:      3:a28a9d1a809c
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     z
   
   changeset:   4:6c0482d977a3
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     z
   
 
 clone bookmarks
 
   $ hg -R ../remote bookmark test
   $ hg -R ../remote bookmarks
    * test                      4:6c0482d977a3
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 6 changesets with 5 changes to 4 files (+1 heads)
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R local-bookmarks bookmarks
      test                      4:6c0482d977a3
 
 passwords in ssh urls are not supported
 (we use a glob here because different Python versions give different
 results here)
 
   $ hg push ssh://user:erroneouspwd@dummy/remote
   pushing to ssh://user:*@dummy/remote (glob)
   abort: password in URL not supported!
   [255]
 
   $ cd ..
 
 hide outer repo
   $ hg init
 
 Test remote paths with spaces (issue2983):
 
   $ hg init --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   $ touch "$TESTTMP/a repo/test"
   $ hg -R 'a repo' commit -A -m "test"
   adding test
   $ hg -R 'a repo' tag tag
   $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   73649e48688a
 
   $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo#noNoNO"
   abort: unknown revision 'noNoNO'!
   [255]
 
 Test (non-)escaping of remote paths with spaces when cloning (issue3145):
 
   $ hg clone --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   destination directory: a repo
   abort: destination 'a repo' is not empty
   [255]
 
 Test hg-ssh using a helper script that will restore PYTHONPATH (which might
 have been cleared by a hg.exe wrapper) and invoke hg-ssh with the right
 parameters:
 
   $ cat > ssh.sh << EOF
   > userhost="\$1"
   > SSH_ORIGINAL_COMMAND="\$2"
   > export SSH_ORIGINAL_COMMAND
   > PYTHONPATH="$PYTHONPATH"
   > export PYTHONPATH
   > python "$TESTDIR/../contrib/hg-ssh" "$TESTTMP/a repo"
   > EOF
 
   $ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a repo"
   73649e48688a
 
   $ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a'repo"
   remote: Illegal repository "$TESTTMP/a'repo" (glob)
   abort: no suitable response from remote hg!
   [255]
 
   $ hg id --ssh "sh ssh.sh" --remotecmd hacking "ssh://user@dummy/a'repo"
   remote: Illegal command "hacking -R 'a'\''repo' serve --stdio"
   abort: no suitable response from remote hg!
   [255]
 
   $ SSH_ORIGINAL_COMMAND="'hg' serve -R 'a'repo' --stdio" python "$TESTDIR/../contrib/hg-ssh"
   Illegal command "'hg' serve -R 'a'repo' --stdio": No closing quotation
   [255]
 
 Test hg-ssh in read-only mode:
 
   $ cat > ssh.sh << EOF
   > userhost="\$1"
   > SSH_ORIGINAL_COMMAND="\$2"
   > export SSH_ORIGINAL_COMMAND
   > PYTHONPATH="$PYTHONPATH"
   > export PYTHONPATH
   > python "$TESTDIR/../contrib/hg-ssh" --read-only "$TESTTMP/remote"
   > EOF
 
   $ hg clone --ssh "sh ssh.sh" "ssh://user@dummy/$TESTTMP/remote" read-only-local
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 6 changesets with 5 changes to 4 files (+1 heads)
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ cd read-only-local
   $ echo "baz" > bar
   $ hg ci -A -m "unpushable commit" bar
   $ hg push --ssh "sh ../ssh.sh"
   pushing to ssh://user@dummy/*/remote (glob)
   searching for changes
   remote: Permission denied
   remote: abort: pretxnopen.hg-ssh hook failed
   remote: Permission denied
   remote: pushkey-abort: prepushkey.hg-ssh hook failed
   updating 6c0482d977a3 to public failed!
   [1]
 
   $ cd ..
 
 stderr from remote commands should be printed before stdout from local code (issue4336)
 
   $ hg clone remote stderr-ordering
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd stderr-ordering
   $ cat >> localwrite.py << EOF
   > from mercurial import exchange, extensions
   > 
   > def wrappedpush(orig, repo, *args, **kwargs):
   >     res = orig(repo, *args, **kwargs)
   >     repo.ui.write('local stdout\n')
   >     return res
   > 
   > def extsetup(ui):
   >     extensions.wrapfunction(exchange, 'push', wrappedpush)
   > EOF
 
   $ cat >> .hg/hgrc << EOF
   > [paths]
   > default-push = ssh://user@dummy/remote
   > [ui]
   > ssh = python "$TESTDIR/dummyssh"
   > [extensions]
   > localwrite = localwrite.py
   > EOF
 
   $ echo localwrite > foo
   $ hg commit -m 'testing localwrite'
   $ hg push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: KABOOM
   local stdout
 
 debug output
 
   $ hg pull --debug ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
   running python ".*/dummyssh" user@dummy ('|")hg -R remote serve --stdio('|") (re)
   sending hello command
   sending between command
   remote: 355
   remote: capabilities: lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN
   remote: 1
   preparing listkeys for "bookmarks"
   sending listkeys command
   received listkey for "bookmarks": 45 bytes
   query 1; heads
   sending batch command
   searching for changes
   all remote heads known locally
   no changes found
   preparing listkeys for "phases"
   sending listkeys command
   received listkey for "phases": 15 bytes
   checking for updated bookmarks
 
   $ cd ..
 
   $ cat dummylog
   Got arguments 1:user@dummy 2:hg -R nonexistent serve --stdio
   Got arguments 1:user@dummy 2:hg -R /$TESTTMP/nonexistent serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R local-stream serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R doesnotexist serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R local serve --stdio
   Got arguments 1:user@dummy 2:hg -R $TESTTMP/local serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
-  changegroup-in-remote hook: HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_NODE_LAST=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
+  changegroup-in-remote hook: HG_HOOKTYPE=changegroup HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_NODE_LAST=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
-  changegroup-in-remote hook: HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_NODE_LAST=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
+  changegroup-in-remote hook: HG_HOOKTYPE=changegroup HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_NODE_LAST=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg init 'a repo'
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
-  changegroup-in-remote hook: HG_NODE=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_NODE_LAST=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
+  changegroup-in-remote hook: HG_HOOKTYPE=changegroup HG_NODE=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_NODE_LAST=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
 
 remote hook failure is attributed to remote
 
   $ cat > $TESTTMP/failhook << EOF
   > def hook(ui, repo, **kwargs):
   >     ui.write('hook failure!\n')
   >     ui.flush()
   >     return 1
   > EOF
 
   $ echo "pretxnchangegroup.fail = python:$TESTTMP/failhook:hook" >> remote/.hg/hgrc
 
   $ hg -q --config ui.ssh="python $TESTDIR/dummyssh" clone ssh://user@dummy/remote hookout
   $ cd hookout
   $ touch hookfailure
   $ hg -q commit -A -m 'remote hook failure'
   $ hg --config ui.ssh="python $TESTDIR/dummyssh" push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: hook failure!
   remote: transaction abort!
   remote: rollback completed
   remote: abort: pretxnchangegroup.fail hook failed
   [1]
 
 abort during pull is properly reported as such
 
   $ echo morefoo >> ../remote/foo
   $ hg -R ../remote commit --message "more foo to be pulled"
   $ cat >> ../remote/.hg/hgrc << EOF
   > [extensions]
   > crash = ${TESTDIR}/crashgetbundler.py
   > EOF
   $ hg --config ui.ssh="python $TESTDIR/dummyssh" pull
   pulling from ssh://user@dummy/remote
   searching for changes
   adding changesets
   remote: abort: this is an exercise
   transaction abort!
   rollback completed
   abort: stream ended unexpectedly (got 0 bytes, expected 4)
   [255]

tests/test-ssh.t

@@ -1,564 +1,564
 
 This test tries to exercise the ssh functionality with a dummy script
 
   $ cat <<EOF >> $HGRCPATH
   > [format]
   > usegeneraldelta=yes
   > EOF
 
 creating 'remote' repo
 
   $ hg init remote
   $ cd remote
   $ echo this > foo
   $ echo this > fooO
   $ hg ci -A -m "init" foo fooO
 
 insert a closed branch (issue4428)
 
   $ hg up null
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ hg branch closed
   marked working directory as branch closed
   (branches are permanent and global, did you want a bookmark?)
   $ hg ci -mc0
   $ hg ci --close-branch -mc1
   $ hg up -q default
 
 configure for serving
 
   $ cat <<EOF > .hg/hgrc
   > [server]
   > uncompressed = True
   > 
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup-in-remote 0 ../dummylog"
   > EOF
   $ cd ..
 
 repo not found error
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local
   remote: abort: repository nonexistent not found!
   abort: no suitable response from remote hg!
   [255]
 
 non-existent absolute path
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/nonexistent local
   remote: abort: repository $TESTTMP/nonexistent not found!
   abort: no suitable response from remote hg!
   [255]
 
 clone remote via stream
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/remote local-stream
   streaming all changes
   4 files to transfer, 602 bytes of data
   transferred 602 bytes in * seconds (*) (glob)
   searching for changes
   no changes found
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd local-stream
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 3 changesets, 2 total revisions
   $ hg branches
   default                        0:1160648e36ce
   $ cd ..
 
 clone bookmarks via stream
 
   $ hg -R local-stream book mybook
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/local-stream stream2
   streaming all changes
   4 files to transfer, 602 bytes of data
   transferred 602 bytes in * seconds (*) (glob)
   searching for changes
   no changes found
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd stream2
   $ hg book
      mybook                    0:1160648e36ce
   $ cd ..
   $ rm -rf local-stream stream2
 
 clone remote via pull
 
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 2 changes to 2 files
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 verify
 
   $ cd local
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 3 changesets, 2 total revisions
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup-in-local 0 ../dummylog"
   > EOF
 
 empty default pull
 
   $ hg paths
   default = ssh://user@dummy/remote
   $ hg pull -e "python \"$TESTDIR/dummyssh\""
   pulling from ssh://user@dummy/remote
   searching for changes
   no changes found
 
 pull from wrong ssh URL
 
   $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/doesnotexist
   pulling from ssh://user@dummy/doesnotexist
   remote: abort: repository doesnotexist not found!
   abort: no suitable response from remote hg!
   [255]
 
 local change
 
   $ echo bleah > foo
   $ hg ci -m "add"
 
 updating rc
 
   $ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
   $ echo "[ui]" >> .hg/hgrc
   $ echo "ssh = python \"$TESTDIR/dummyssh\"" >> .hg/hgrc
 
 find outgoing
 
   $ hg out ssh://user@dummy/remote
   comparing with ssh://user@dummy/remote
   searching for changes
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
 
 find incoming on the remote side
 
   $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/local
   comparing with ssh://user@dummy/local
   searching for changes
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
 
 find incoming on the remote side (using absolute path)
 
   $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`"
   comparing with ssh://user@dummy/$TESTTMP/local
   searching for changes
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
 
 push
 
   $ hg push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   $ cd ../remote
 
 check remote tip
 
   $ hg tip
   changeset:   3:a28a9d1a809c
   tag:         tip
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     add
   
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 4 changesets, 3 total revisions
   $ hg cat -r tip foo
   bleah
   $ echo z > z
   $ hg ci -A -m z z
   created new head
 
 test pushkeys and bookmarks
 
   $ cd ../local
   $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces
   bookmarks	
   namespaces	
   phases	
   $ hg book foo -r 0
   $ hg out -B
   comparing with ssh://user@dummy/remote
   searching for changed bookmarks
      foo                       1160648e36ce
   $ hg push -B foo
   pushing to ssh://user@dummy/remote
   searching for changes
   no changes found
   exporting bookmark foo
   [1]
   $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks
   foo	1160648e36cec0054048a7edc4110c6f84fde594
   $ hg book -f foo
   $ hg push --traceback
   pushing to ssh://user@dummy/remote
   searching for changes
   no changes found
   updating bookmark foo
   [1]
   $ hg book -d foo
   $ hg in -B
   comparing with ssh://user@dummy/remote
   searching for changed bookmarks
      foo                       a28a9d1a809c
   $ hg book -f -r 0 foo
   $ hg pull -B foo
   pulling from ssh://user@dummy/remote
   no changes found
   updating bookmark foo
   $ hg book -d foo
   $ hg push -B foo
   pushing to ssh://user@dummy/remote
   searching for changes
   no changes found
   deleting remote bookmark foo
   [1]
 
 a bad, evil hook that prints to stdout
 
   $ cat <<EOF > $TESTTMP/badhook
   > import sys
   > sys.stdout.write("KABOOM\n")
   > EOF
 
   $ cat <<EOF > $TESTTMP/badpyhook.py
   > import sys
   > def hook(ui, repo, hooktype, **kwargs):
   >     sys.stdout.write("KABOOM IN PROCESS\n")
   > EOF
 
   $ cat <<EOF >> ../remote/.hg/hgrc
   > [hooks]
   > changegroup.stdout = python $TESTTMP/badhook
   > changegroup.pystdout = python:$TESTTMP/badpyhook.py:hook
   > EOF
   $ echo r > r
   $ hg ci -A -m z r
 
 push should succeed even though it has an unexpected response
 
   $ hg push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote has heads on branch 'default' that are not known locally: 6c0482d977a3
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: KABOOM
   remote: KABOOM IN PROCESS
   $ hg -R ../remote heads
   changeset:   5:1383141674ec
   tag:         tip
   parent:      3:a28a9d1a809c
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     z
   
   changeset:   4:6c0482d977a3
   parent:      0:1160648e36ce
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     z
   
 
 clone bookmarks
 
   $ hg -R ../remote bookmark test
   $ hg -R ../remote bookmarks
    * test                      4:6c0482d977a3
   $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 6 changesets with 5 changes to 4 files (+1 heads)
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R local-bookmarks bookmarks
      test                      4:6c0482d977a3
 
 passwords in ssh urls are not supported
 (we use a glob here because different Python versions give different
 results here)
 
   $ hg push ssh://user:erroneouspwd@dummy/remote
   pushing to ssh://user:*@dummy/remote (glob)
   abort: password in URL not supported!
   [255]
 
   $ cd ..
 
 hide outer repo
   $ hg init
 
 Test remote paths with spaces (issue2983):
 
   $ hg init --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   $ touch "$TESTTMP/a repo/test"
   $ hg -R 'a repo' commit -A -m "test"
   adding test
   $ hg -R 'a repo' tag tag
   $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   73649e48688a
 
   $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo#noNoNO"
   abort: unknown revision 'noNoNO'!
   [255]
 
 Test (non-)escaping of remote paths with spaces when cloning (issue3145):
 
   $ hg clone --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   destination directory: a repo
   abort: destination 'a repo' is not empty
   [255]
 
 Test hg-ssh using a helper script that will restore PYTHONPATH (which might
 have been cleared by a hg.exe wrapper) and invoke hg-ssh with the right
 parameters:
 
   $ cat > ssh.sh << EOF
   > userhost="\$1"
   > SSH_ORIGINAL_COMMAND="\$2"
   > export SSH_ORIGINAL_COMMAND
   > PYTHONPATH="$PYTHONPATH"
   > export PYTHONPATH
   > python "$TESTDIR/../contrib/hg-ssh" "$TESTTMP/a repo"
   > EOF
 
   $ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a repo"
   73649e48688a
 
   $ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a'repo"
   remote: Illegal repository "$TESTTMP/a'repo" (glob)
   abort: no suitable response from remote hg!
   [255]
 
   $ hg id --ssh "sh ssh.sh" --remotecmd hacking "ssh://user@dummy/a'repo"
   remote: Illegal command "hacking -R 'a'\''repo' serve --stdio"
   abort: no suitable response from remote hg!
   [255]
 
   $ SSH_ORIGINAL_COMMAND="'hg' -R 'a'repo' serve --stdio" python "$TESTDIR/../contrib/hg-ssh"
   Illegal command "'hg' -R 'a'repo' serve --stdio": No closing quotation
   [255]
 
 Test hg-ssh in read-only mode:
 
   $ cat > ssh.sh << EOF
   > userhost="\$1"
   > SSH_ORIGINAL_COMMAND="\$2"
   > export SSH_ORIGINAL_COMMAND
   > PYTHONPATH="$PYTHONPATH"
   > export PYTHONPATH
   > python "$TESTDIR/../contrib/hg-ssh" --read-only "$TESTTMP/remote"
   > EOF
 
   $ hg clone --ssh "sh ssh.sh" "ssh://user@dummy/$TESTTMP/remote" read-only-local
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 6 changesets with 5 changes to 4 files (+1 heads)
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ cd read-only-local
   $ echo "baz" > bar
   $ hg ci -A -m "unpushable commit" bar
   $ hg push --ssh "sh ../ssh.sh"
   pushing to ssh://user@dummy/*/remote (glob)
   searching for changes
   remote: Permission denied
   remote: pretxnopen.hg-ssh hook failed
   abort: push failed on remote
   [255]
 
   $ cd ..
 
 stderr from remote commands should be printed before stdout from local code (issue4336)
 
   $ hg clone remote stderr-ordering
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd stderr-ordering
   $ cat >> localwrite.py << EOF
   > from mercurial import exchange, extensions
   > 
   > def wrappedpush(orig, repo, *args, **kwargs):
   >     res = orig(repo, *args, **kwargs)
   >     repo.ui.write('local stdout\n')
   >     return res
   > 
   > def extsetup(ui):
   >     extensions.wrapfunction(exchange, 'push', wrappedpush)
   > EOF
 
   $ cat >> .hg/hgrc << EOF
   > [paths]
   > default-push = ssh://user@dummy/remote
   > [ui]
   > ssh = python "$TESTDIR/dummyssh"
   > [extensions]
   > localwrite = localwrite.py
   > EOF
 
   $ echo localwrite > foo
   $ hg commit -m 'testing localwrite'
   $ hg push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: KABOOM
   remote: KABOOM IN PROCESS
   local stdout
 
 debug output
 
   $ hg pull --debug ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
   running python ".*/dummyssh" user@dummy ('|")hg -R remote serve --stdio('|") (re)
   sending hello command
   sending between command
   remote: 355
   remote: capabilities: lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN
   remote: 1
   query 1; heads
   sending batch command
   searching for changes
   all remote heads known locally
   no changes found
   sending getbundle command
   bundle2-input-bundle: with-transaction
   bundle2-input-part: "listkeys" (params: 1 mandatory) supported
   bundle2-input-part: total payload size 15
   bundle2-input-part: "listkeys" (params: 1 mandatory) supported
   bundle2-input-part: total payload size 45
   bundle2-input-bundle: 1 parts total
   checking for updated bookmarks
 
   $ cd ..
 
   $ cat dummylog
   Got arguments 1:user@dummy 2:hg -R nonexistent serve --stdio
   Got arguments 1:user@dummy 2:hg -R $TESTTMP/nonexistent serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R local-stream serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R doesnotexist serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R local serve --stdio
   Got arguments 1:user@dummy 2:hg -R $TESTTMP/local serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
-  changegroup-in-remote hook: HG_BUNDLE2=1 HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_NODE_LAST=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
+  changegroup-in-remote hook: HG_BUNDLE2=1 HG_HOOKTYPE=changegroup HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_NODE_LAST=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
-  changegroup-in-remote hook: HG_BUNDLE2=1 HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_NODE_LAST=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
+  changegroup-in-remote hook: HG_BUNDLE2=1 HG_HOOKTYPE=changegroup HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_NODE_LAST=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
   Got arguments 1:user@dummy 2:hg init 'a repo'
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
-  changegroup-in-remote hook: HG_BUNDLE2=1 HG_NODE=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_NODE_LAST=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
+  changegroup-in-remote hook: HG_BUNDLE2=1 HG_HOOKTYPE=changegroup HG_NODE=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_NODE_LAST=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_SOURCE=serve HG_TXNID=TXN:$ID$ HG_URL=remote:ssh:$LOCALIP
   Got arguments 1:user@dummy 2:hg -R remote serve --stdio
 
 remote hook failure is attributed to remote
 
   $ cat > $TESTTMP/failhook << EOF
   > def hook(ui, repo, **kwargs):
   >     ui.write('hook failure!\n')
   >     ui.flush()
   >     return 1
   > EOF
 
   $ echo "pretxnchangegroup.fail = python:$TESTTMP/failhook:hook" >> remote/.hg/hgrc
 
   $ hg -q --config ui.ssh="python $TESTDIR/dummyssh" clone ssh://user@dummy/remote hookout
   $ cd hookout
   $ touch hookfailure
   $ hg -q commit -A -m 'remote hook failure'
   $ hg --config ui.ssh="python $TESTDIR/dummyssh" push
   pushing to ssh://user@dummy/remote
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   remote: hook failure!
   remote: transaction abort!
   remote: rollback completed
   remote: pretxnchangegroup.fail hook failed
   abort: push failed on remote
   [255]
 
 abort during pull is properly reported as such
 
   $ echo morefoo >> ../remote/foo
   $ hg -R ../remote commit --message "more foo to be pulled"
   $ cat >> ../remote/.hg/hgrc << EOF
   > [extensions]
   > crash = ${TESTDIR}/crashgetbundler.py
   > EOF
   $ hg --config ui.ssh="python $TESTDIR/dummyssh" pull
   pulling from ssh://user@dummy/remote
   searching for changes
   remote: abort: this is an exercise
   abort: pull failed on remote
   [255]

tests/test-static-http.t

@@ -1,159 +1,159
 #require killdaemons
 
   $ hg clone http://localhost:$HGPORT/ copy
   abort: * (glob)
   [255]
   $ test -d copy
   [1]
 
 This server doesn't do range requests so it's basically only good for
 one pull
 
   $ python "$TESTDIR/dumbhttp.py" -p $HGPORT --pid dumb.pid
   $ cat dumb.pid >> $DAEMON_PIDS
   $ hg init remote
   $ cd remote
   $ echo foo > bar
   $ echo c2 > '.dotfile with spaces'
   $ hg add
   adding .dotfile with spaces
   adding bar
   $ hg commit -m"test"
   $ hg tip
   changeset:   0:02770d679fb8
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     test
   
   $ cd ..
   $ hg clone static-http://localhost:$HGPORT/remote local
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 2 changes to 2 files
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd local
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   2 files, 1 changesets, 2 total revisions
   $ cat bar
   foo
   $ cd ../remote
   $ echo baz > quux
   $ hg commit -A -mtest2
   adding quux
 
 check for HTTP opener failures when cachefile does not exist
 
   $ rm .hg/cache/*
   $ cd ../local
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > changegroup = sh -c "printenv.py changegroup"
   > EOF
   $ hg pull
   pulling from static-http://localhost:$HGPORT/remote
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
-  changegroup hook: HG_NODE=4ac2e3648604439c580c69b09ec9d93a88d93432 HG_NODE_LAST=4ac2e3648604439c580c69b09ec9d93a88d93432 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT/remote
+  changegroup hook: HG_HOOKTYPE=changegroup HG_NODE=4ac2e3648604439c580c69b09ec9d93a88d93432 HG_NODE_LAST=4ac2e3648604439c580c69b09ec9d93a88d93432 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT/remote
   (run 'hg update' to get a working copy)
 
 trying to push
 
   $ hg update
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo more foo >> bar
   $ hg commit -m"test"
   $ hg push
   pushing to static-http://localhost:$HGPORT/remote
   abort: destination does not support push
   [255]
 
 trying clone -r
 
   $ cd ..
   $ hg clone -r doesnotexist static-http://localhost:$HGPORT/remote local0
   abort: unknown revision 'doesnotexist'!
   [255]
   $ hg clone -r 0 static-http://localhost:$HGPORT/remote local0
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 2 changes to 2 files
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 test with "/" URI (issue747) and subrepo
 
   $ hg init
   $ hg init sub
   $ touch sub/test
   $ hg -R sub commit -A -m "test"
   adding test
   $ hg -R sub tag not-empty
   $ echo sub=sub > .hgsub
   $ echo a > a
   $ hg add a .hgsub
   $ hg -q ci -ma
   $ hg clone static-http://localhost:$HGPORT/ local2
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 3 changes to 3 files
   updating to branch default
   cloning subrepo sub from static-http://localhost:$HGPORT/sub
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd local2
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   3 files, 1 changesets, 3 total revisions
   checking subrepo links
   $ cat a
   a
   $ hg paths
   default = static-http://localhost:$HGPORT/
 
 test with empty repo (issue965)
 
   $ cd ..
   $ hg init remotempty
   $ hg clone static-http://localhost:$HGPORT/remotempty local3
   no changes found
   updating to branch default
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd local3
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   0 files, 0 changesets, 0 total revisions
   $ hg paths
   default = static-http://localhost:$HGPORT/remotempty
 
 test with non-repo
 
   $ cd ..
   $ mkdir notarepo
   $ hg clone static-http://localhost:$HGPORT/notarepo local3
   abort: 'http://localhost:$HGPORT/notarepo' does not appear to be an hg repository!
   [255]
   $ killdaemons.py