narrow: consider both local and remote matchers in narrowchangegroup

The existing code that picked one or the other seemed very
suspicious. This patch makes us intersect the local matcher with the
matcher from the remote, which seems better. It fixes one test case
and makes another one that used to crash no longer crash, but instead
silently succeed with a push that's lossy, so that remains to be
fixed.

The real reason for doing this now is that I'm going to move
narrowrepo.narrowmatch() onto localrepo and then it will always be
defined, which would otherwise break this code.

Differential Revision: https://phab.mercurial-scm.org/D2490

hgext/narrow/narrowchangegroup.py

@@ -1,366 +1,372 b''
 # narrowchangegroup.py - narrow clone changegroup creation and consumption
 #
 # Copyright 2017 Google, Inc.
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 from mercurial.i18n import _
 from mercurial import (
     changegroup,
     error,
     extensions,
     manifest,
+    match as matchmod,
     mdiff,
     node,
     revlog,
     util,
 )
 
 def setup():
 
+    def _cgmatcher(cgpacker):
+        localmatcher = getattr(cgpacker._repo, 'narrowmatch', lambda: None)()
+        remotematcher = getattr(cgpacker, '_narrow_matcher', lambda: None)()
+        if localmatcher and remotematcher:
+            return matchmod.intersectmatchers(localmatcher, remotematcher)
+        else:
+            return localmatcher or remotematcher
+
     def prune(orig, self, revlog, missing, commonrevs):
         if isinstance(revlog, manifest.manifestrevlog):
-            matcher = getattr(self._repo, 'narrowmatch',
-                              getattr(self, '_narrow_matcher', None))
-            if (matcher is not None and
-                not matcher().visitdir(revlog._dir[:-1] or '.')):
+            matcher = _cgmatcher(self)
+            if (matcher and
+                not matcher.visitdir(revlog._dir[:-1] or '.')):
                 return []
         return orig(self, revlog, missing, commonrevs)
 
     extensions.wrapfunction(changegroup.cg1packer, 'prune', prune)
 
     def generatefiles(orig, self, changedfiles, linknodes, commonrevs,
                       source):
-        matcher = getattr(self._repo, 'narrowmatch',
-                          getattr(self, '_narrow_matcher', None))
-        if matcher is not None:
-            narrowmatch = matcher()
-            changedfiles = [f for f in changedfiles if narrowmatch(f)]
+        matcher = _cgmatcher(self)
+        if matcher:
+            changedfiles = filter(matcher, changedfiles)
         if getattr(self, 'is_shallow', False):
             # See comment in generate() for why this sadness is a thing.
             mfdicts = self._mfdicts
             del self._mfdicts
             # In a shallow clone, the linknodes callback needs to also include
             # those file nodes that are in the manifests we sent but weren't
             # introduced by those manifests.
             commonctxs = [self._repo[c] for c in commonrevs]
             oldlinknodes = linknodes
             clrev = self._repo.changelog.rev
             def linknodes(flog, fname):
                 for c in commonctxs:
                     try:
                         fnode = c.filenode(fname)
                         self.clrev_to_localrev[c.rev()] = flog.rev(fnode)
                     except error.ManifestLookupError:
                         pass
                 links = oldlinknodes(flog, fname)
                 if len(links) != len(mfdicts):
                     for mf, lr in mfdicts:
                         fnode = mf.get(fname, None)
                         if fnode in links:
                             links[fnode] = min(links[fnode], lr, key=clrev)
                         elif fnode:
                             links[fnode] = lr
                 return links
         return orig(self, changedfiles, linknodes, commonrevs, source)
     extensions.wrapfunction(
         changegroup.cg1packer, 'generatefiles', generatefiles)
 
     def ellipsisdata(packer, rev, revlog_, p1, p2, data, linknode):
         n = revlog_.node(rev)
         p1n, p2n = revlog_.node(p1), revlog_.node(p2)
         flags = revlog_.flags(rev)
         flags |= revlog.REVIDX_ELLIPSIS
         meta = packer.builddeltaheader(
             n, p1n, p2n, node.nullid, linknode, flags)
         # TODO: try and actually send deltas for ellipsis data blocks
         diffheader = mdiff.trivialdiffheader(len(data))
         l = len(meta) + len(diffheader) + len(data)
         return ''.join((changegroup.chunkheader(l),
                         meta,
                         diffheader,
                         data))
 
     def close(orig, self):
         getattr(self, 'clrev_to_localrev', {}).clear()
         if getattr(self, 'next_clrev_to_localrev', {}):
             self.clrev_to_localrev = self.next_clrev_to_localrev
             del self.next_clrev_to_localrev
         self.changelog_done = True
         return orig(self)
     extensions.wrapfunction(changegroup.cg1packer, 'close', close)
 
     # In a perfect world, we'd generate better ellipsis-ified graphs
     # for non-changelog revlogs. In practice, we haven't started doing
     # that yet, so the resulting DAGs for the manifestlog and filelogs
     # are actually full of bogus parentage on all the ellipsis
     # nodes. This has the side effect that, while the contents are
     # correct, the individual DAGs might be completely out of whack in
     # a case like 882681bc3166 and its ancestors (back about 10
     # revisions or so) in the main hg repo.
     #
     # The one invariant we *know* holds is that the new (potentially
     # bogus) DAG shape will be valid if we order the nodes in the
     # order that they're introduced in dramatis personae by the
     # changelog, so what we do is we sort the non-changelog histories
     # by the order in which they are used by the changelog.
     def _sortgroup(orig, self, revlog, nodelist, lookup):
         if not util.safehasattr(self, 'full_nodes') or not self.clnode_to_rev:
             return orig(self, revlog, nodelist, lookup)
         key = lambda n: self.clnode_to_rev[lookup(n)]
         return [revlog.rev(n) for n in sorted(nodelist, key=key)]
 
     extensions.wrapfunction(changegroup.cg1packer, '_sortgroup', _sortgroup)
 
     def generate(orig, self, commonrevs, clnodes, fastpathlinkrev, source):
         '''yield a sequence of changegroup chunks (strings)'''
         # Note: other than delegating to orig, the only deviation in
         # logic from normal hg's generate is marked with BEGIN/END
         # NARROW HACK.
         if not util.safehasattr(self, 'full_nodes'):
             # not sending a narrow bundle
             for x in orig(self, commonrevs, clnodes, fastpathlinkrev, source):
                 yield x
             return
 
         repo = self._repo
         cl = repo.changelog
         mfl = repo.manifestlog
         mfrevlog = mfl._revlog
 
         clrevorder = {}
         mfs = {} # needed manifests
         fnodes = {} # needed file nodes
         changedfiles = set()
 
         # Callback for the changelog, used to collect changed files and manifest
         # nodes.
         # Returns the linkrev node (identity in the changelog case).
         def lookupcl(x):
             c = cl.read(x)
             clrevorder[x] = len(clrevorder)
             # BEGIN NARROW HACK
             #
             # Only update mfs if x is going to be sent. Otherwise we
             # end up with bogus linkrevs specified for manifests and
             # we skip some manifest nodes that we should otherwise
             # have sent.
             if x in self.full_nodes or cl.rev(x) in self.precomputed_ellipsis:
                 n = c[0]
                 # record the first changeset introducing this manifest version
                 mfs.setdefault(n, x)
                 # Set this narrow-specific dict so we have the lowest manifest
                 # revnum to look up for this cl revnum. (Part of mapping
                 # changelog ellipsis parents to manifest ellipsis parents)
                 self.next_clrev_to_localrev.setdefault(cl.rev(x),
                                                        mfrevlog.rev(n))
             # We can't trust the changed files list in the changeset if the
             # client requested a shallow clone.
             if self.is_shallow:
                 changedfiles.update(mfl[c[0]].read().keys())
             else:
                 changedfiles.update(c[3])
             # END NARROW HACK
             # Record a complete list of potentially-changed files in
             # this manifest.
             return x
 
         self._verbosenote(_('uncompressed size of bundle content:\n'))
         size = 0
         for chunk in self.group(clnodes, cl, lookupcl, units=_('changesets')):
             size += len(chunk)
             yield chunk
         self._verbosenote(_('%8.i (changelog)\n') % size)
 
         # We need to make sure that the linkrev in the changegroup refers to
         # the first changeset that introduced the manifest or file revision.
         # The fastpath is usually safer than the slowpath, because the filelogs
         # are walked in revlog order.
         #
         # When taking the slowpath with reorder=None and the manifest revlog
         # uses generaldelta, the manifest may be walked in the "wrong" order.
         # Without 'clrevorder', we would get an incorrect linkrev (see fix in
         # cc0ff93d0c0c).
         #
         # When taking the fastpath, we are only vulnerable to reordering
         # of the changelog itself. The changelog never uses generaldelta, so
         # it is only reordered when reorder=True. To handle this case, we
         # simply take the slowpath, which already has the 'clrevorder' logic.
         # This was also fixed in cc0ff93d0c0c.
         fastpathlinkrev = fastpathlinkrev and not self._reorder
         # Treemanifests don't work correctly with fastpathlinkrev
         # either, because we don't discover which directory nodes to
         # send along with files. This could probably be fixed.
         fastpathlinkrev = fastpathlinkrev and (
             'treemanifest' not in repo.requirements)
         # Shallow clones also don't work correctly with fastpathlinkrev
         # because file nodes may need to be sent for a manifest even if they
         # weren't introduced by that manifest.
         fastpathlinkrev = fastpathlinkrev and not self.is_shallow
 
         for chunk in self.generatemanifests(commonrevs, clrevorder,
                 fastpathlinkrev, mfs, fnodes, source):
             yield chunk
         # BEGIN NARROW HACK
         mfdicts = None
         if self.is_shallow:
             mfdicts = [(self._repo.manifestlog[n].read(), lr)
                        for (n, lr) in mfs.iteritems()]
         # END NARROW HACK
         mfs.clear()
         clrevs = set(cl.rev(x) for x in clnodes)
 
         if not fastpathlinkrev:
             def linknodes(unused, fname):
                 return fnodes.get(fname, {})
         else:
             cln = cl.node
             def linknodes(filerevlog, fname):
                 llr = filerevlog.linkrev
                 fln = filerevlog.node
                 revs = ((r, llr(r)) for r in filerevlog)
                 return dict((fln(r), cln(lr)) for r, lr in revs if lr in clrevs)
 
         # BEGIN NARROW HACK
         #
         # We need to pass the mfdicts variable down into
         # generatefiles(), but more than one command might have
         # wrapped generatefiles so we can't modify the function
         # signature. Instead, we pass the data to ourselves using an
         # instance attribute. I'm sorry.
         self._mfdicts = mfdicts
         # END NARROW HACK
         for chunk in self.generatefiles(changedfiles, linknodes, commonrevs,
                                         source):
             yield chunk
 
         yield self.close()
 
         if clnodes:
             repo.hook('outgoing', node=node.hex(clnodes[0]), source=source)
     extensions.wrapfunction(changegroup.cg1packer, 'generate', generate)
 
     def revchunk(orig, self, revlog, rev, prev, linknode):
         if not util.safehasattr(self, 'full_nodes'):
             # not sending a narrow changegroup
             for x in orig(self, revlog, rev, prev, linknode):
                 yield x
             return
         # build up some mapping information that's useful later. See
         # the local() nested function below.
         if not self.changelog_done:
             self.clnode_to_rev[linknode] = rev
             linkrev = rev
             self.clrev_to_localrev[linkrev] = rev
         else:
             linkrev = self.clnode_to_rev[linknode]
             self.clrev_to_localrev[linkrev] = rev
         # This is a node to send in full, because the changeset it
         # corresponds to was a full changeset.
         if linknode in self.full_nodes:
             for x in orig(self, revlog, rev, prev, linknode):
                 yield x
             return
         # At this point, a node can either be one we should skip or an
         # ellipsis. If it's not an ellipsis, bail immediately.
         if linkrev not in self.precomputed_ellipsis:
             return
         linkparents = self.precomputed_ellipsis[linkrev]
         def local(clrev):
             """Turn a changelog revnum into a local revnum.
 
             The ellipsis dag is stored as revnums on the changelog,
             but when we're producing ellipsis entries for
             non-changelog revlogs, we need to turn those numbers into
             something local. This does that for us, and during the
             changelog sending phase will also expand the stored
             mappings as needed.
             """
             if clrev == node.nullrev:
                 return node.nullrev
             if not self.changelog_done:
                 # If we're doing the changelog, it's possible that we
                 # have a parent that is already on the client, and we
                 # need to store some extra mapping information so that
                 # our contained ellipsis nodes will be able to resolve
                 # their parents.
                 if clrev not in self.clrev_to_localrev:
                     clnode = revlog.node(clrev)
                     self.clnode_to_rev[clnode] = clrev
                 return clrev
             # Walk the ellipsis-ized changelog breadth-first looking for a
             # change that has been linked from the current revlog.
             #
             # For a flat manifest revlog only a single step should be necessary
             # as all relevant changelog entries are relevant to the flat
             # manifest.
             #
             # For a filelog or tree manifest dirlog however not every changelog
             # entry will have been relevant, so we need to skip some changelog
             # nodes even after ellipsis-izing.
             walk = [clrev]
             while walk:
                 p = walk[0]
                 walk = walk[1:]
                 if p in self.clrev_to_localrev:
                     return self.clrev_to_localrev[p]
                 elif p in self.full_nodes:
                     walk.extend([pp for pp in self._repo.changelog.parentrevs(p)
                                     if pp != node.nullrev])
                 elif p in self.precomputed_ellipsis:
                     walk.extend([pp for pp in self.precomputed_ellipsis[p]
                                     if pp != node.nullrev])
                 else:
                     # In this case, we've got an ellipsis with parents
                     # outside the current bundle (likely an
                     # incremental pull). We "know" that we can use the
                     # value of this same revlog at whatever revision
                     # is pointed to by linknode. "Know" is in scare
                     # quotes because I haven't done enough examination
                     # of edge cases to convince myself this is really
                     # a fact - it works for all the (admittedly
                     # thorough) cases in our testsuite, but I would be
                     # somewhat unsurprised to find a case in the wild
                     # where this breaks down a bit. That said, I don't
                     # know if it would hurt anything.
                     for i in xrange(rev, 0, -1):
                         if revlog.linkrev(i) == clrev:
                             return i
                     # We failed to resolve a parent for this node, so
                     # we crash the changegroup construction.
                     raise error.Abort(
                         'unable to resolve parent while packing %r %r'
                         ' for changeset %r' % (revlog.indexfile, rev, clrev))
             return node.nullrev
 
         if not linkparents or (
             revlog.parentrevs(rev) == (node.nullrev, node.nullrev)):
             p1, p2 = node.nullrev, node.nullrev
         elif len(linkparents) == 1:
             p1, = sorted(local(p) for p in linkparents)
             p2 = node.nullrev
         else:
             p1, p2 = sorted(local(p) for p in linkparents)
         yield ellipsisdata(
             self, rev, revlog, p1, p2, revlog.revision(rev), linknode)
     extensions.wrapfunction(changegroup.cg1packer, 'revchunk', revchunk)
 
     def deltaparent(orig, self, revlog, rev, p1, p2, prev):
         if util.safehasattr(self, 'full_nodes'):
             # TODO: send better deltas when in narrow mode.
             #
             # changegroup.group() loops over revisions to send,
             # including revisions we'll skip. What this means is that
             # `prev` will be a potentially useless delta base for all
             # ellipsis nodes, as the client likely won't have it. In
             # the future we should do bookkeeping about which nodes
             # have been sent to the client, and try to be
             # significantly smarter about delta bases. This is
             # slightly tricky because this same code has to work for
             # all revlogs, and we don't have the linkrev/linknode here.
             return p1
         return orig(self, revlog, rev, p1, p2, prev)
     extensions.wrapfunction(changegroup.cg2packer, 'deltaparent', deltaparent)

tests/test-narrow-exchange.t

@@ -1,210 +1,209 b''
 
   $ . "$TESTDIR/narrow-library.sh"
 
 create full repo
 
   $ hg init master
   $ cd master
   $ cat >> .hg/hgrc <<EOF
   > [narrow]
   > serveellipses=True
   > EOF
 
   $ mkdir inside
   $ echo 1 > inside/f
   $ mkdir inside2
   $ echo 1 > inside2/f
   $ mkdir outside
   $ echo 1 > outside/f
   $ hg ci -Aqm 'initial'
 
   $ echo 2 > inside/f
   $ hg ci -qm 'inside 2'
 
   $ echo 2 > inside2/f
   $ hg ci -qm 'inside2 2'
 
   $ echo 2 > outside/f
   $ hg ci -qm 'outside 2'
 
   $ cd ..
 
   $ hg clone --narrow ssh://user@dummy/master narrow --include inside
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 2 changes to 1 files
   new changesets *:* (glob)
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg clone --narrow ssh://user@dummy/master narrow2 --include inside --include inside2
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 4 changesets with 4 changes to 2 files
   new changesets *:* (glob)
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 Can push to wider repo if change does not affect paths in wider repo that are
 not also in narrower repo
 
   $ cd narrow
   $ echo 3 > inside/f
   $ hg ci -m 'inside 3'
   $ hg push ssh://user@dummy/narrow2
   pushing to ssh://user@dummy/narrow2
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
 
 Can push to narrower repo if change affects only paths within remote's
 narrow spec
 
   $ cd ../narrow2
   $ cat >> .hg/hgrc <<EOF
   > [narrow]
   > serveellipses=True
   > EOF
   $ hg co -r 'desc("inside 3")'
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo 4 > inside/f
   $ hg ci -m 'inside 4'
   $ hg push ssh://user@dummy/narrow
   pushing to ssh://user@dummy/narrow
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
 
 Can push to narrow repo if change affects only paths outside remote's
 narrow spec
 
   $ echo 3 > inside2/f
   $ hg ci -m 'inside2 3'
 TODO: this should be successful
   $ hg push ssh://user@dummy/narrow
   pushing to ssh://user@dummy/narrow
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: transaction abort!
   remote: rollback completed
   remote: abort: data/inside2/f.i@4a1aa07735e6: unknown parent!
   abort: stream ended unexpectedly (got 0 bytes, expected 4)
   [255]
 
 Can pull from wider repo if change affects only paths outside remote's
 narrow spec
   $ echo 4 > inside2/f
   $ hg ci -m 'inside2 4'
   $ hg log -G -T '{rev} {node|short} {files}\n'
   @  7 d78a96df731d inside2/f
   |
   o  6 8c26f5218962 inside2/f
   |
   o  5 ba3480e2f9de inside/f
   |
   o  4 4e5edd526618 inside/f
   |
   o  3 81e7e07b7ab0 outside/f
   |
   o  2 f3993b8c0c2b inside2/f
   |
   o  1 8cd66ca966b4 inside/f
   |
   o  0 c8057d6f53ab inside/f inside2/f outside/f
   
   $ cd ../narrow
   $ hg log -G -T '{rev} {node|short} {files}\n'
   o  4 ba3480e2f9de inside/f
   |
   @  3 4e5edd526618 inside/f
   |
   o  2 81e7e07b7ab0 outside/f
   |
   o  1 8cd66ca966b4 inside/f
   |
   o  0 c8057d6f53ab inside/f inside2/f outside/f
   
   $ hg pull ssh://user@dummy/narrow2
   pulling from ssh://user@dummy/narrow2
   searching for changes
-  remote: abort: unable to resolve parent while packing 'data/inside2/f.i' 3 for changeset 5 (?)
   adding changesets
-  remote: abort: unexpected error: unable to resolve parent while packing 'data/inside2/f.i' 3 for changeset 5
-  transaction abort!
-  rollback completed
-  abort: pull failed on remote
-  [255]
+  adding manifests
+  adding file changes
+  added 1 changesets with 0 changes to 0 files
+  new changesets d78a96df731d
+  (run 'hg update' to get a working copy)
 
 Check that the resulting history is valid in the full repo
 
   $ cd ../narrow2
   $ hg push ssh://user@dummy/master
   pushing to ssh://user@dummy/master
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 4 changesets with 4 changes to 2 files
   $ cd ../master
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   3 files, 8 changesets, 10 total revisions
 
 Can not push to wider repo if change affects paths in wider repo that are
 not also in narrower repo
   $ cd ../master
   $ hg co -r 'desc("inside2 4")'
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo 5 > inside2/f
   $ hg ci -m 'inside2 5'
   $ hg log -G -T '{rev} {node|short} {files}\n'
   @  8 5970befb64ba inside2/f
   |
   o  7 d78a96df731d inside2/f
   |
   o  6 8c26f5218962 inside2/f
   |
   o  5 ba3480e2f9de inside/f
   |
   o  4 4e5edd526618 inside/f
   |
   o  3 81e7e07b7ab0 outside/f
   |
   o  2 f3993b8c0c2b inside2/f
   |
   o  1 8cd66ca966b4 inside/f
   |
   o  0 c8057d6f53ab inside/f inside2/f outside/f
   
   $ cd ../narrow
   $ hg pull
   pulling from ssh://user@dummy/master
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 0 changes to 0 files
   new changesets * (glob)
   (run 'hg update' to get a working copy)
 TODO: this should tell the user that their narrow clone does not have the
 necessary content to be able to push to the target
   $ hg push ssh://user@dummy/narrow2
   pushing to ssh://user@dummy/narrow2
   searching for changes
-  remote has heads on branch 'default' that are not known locally: d78a96df731d
-  abort: push creates new remote head 5970befb64ba!
-  (pull and merge or see 'hg help push' for details about pushing new heads)
-  [255]
+  remote: adding changesets
+  remote: adding manifests
+  remote: adding file changes
+  remote: added 1 changesets with 0 changes to 0 files