phases: replace magic number by constant

Differential Revision: https://phab.mercurial-scm.org/D8695

mercurial/phases.py

@@ -1,897 +1,897
 """ Mercurial phases support code
 
     ---
 
     Copyright 2011 Pierre-Yves David <[e-mail]>
                    Logilab SA        <[e-mail]>
                    Augie Fackler     <[e-mail]>
 
     This software may be used and distributed according to the terms
     of the GNU General Public License version 2 or any later version.
 
     ---
 
 This module implements most phase logic in mercurial.
 
 
 Basic Concept
 =============
 
 A 'changeset phase' is an indicator that tells us how a changeset is
 manipulated and communicated. The details of each phase is described
 below, here we describe the properties they have in common.
 
 Like bookmarks, phases are not stored in history and thus are not
 permanent and leave no audit trail.
 
 First, no changeset can be in two phases at once. Phases are ordered,
 so they can be considered from lowest to highest. The default, lowest
 phase is 'public' - this is the normal phase of existing changesets. A
 child changeset can not be in a lower phase than its parents.
 
 These phases share a hierarchy of traits:
 
             immutable shared
     public:     X        X
     draft:               X
     secret:
 
 Local commits are draft by default.
 
 Phase Movement and Exchange
 ===========================
 
 Phase data is exchanged by pushkey on pull and push. Some servers have
 a publish option set, we call such a server a "publishing server".
 Pushing a draft changeset to a publishing server changes the phase to
 public.
 
 A small list of fact/rules define the exchange of phase:
 
 * old client never changes server states
 * pull never changes server states
 * publish and old server changesets are seen as public by client
 * any secret changeset seen in another repository is lowered to at
   least draft
 
 Here is the final table summing up the 49 possible use cases of phase
 exchange:
 
                            server
                   old     publish      non-publish
                  N   X    N   D   P    N   D   P
     old client
     pull
      N           -   X/X  -   X/D X/P  -   X/D X/P
      X           -   X/X  -   X/D X/P  -   X/D X/P
     push
      X           X/X X/X  X/P X/P X/P  X/D X/D X/P
     new client
     pull
      N           -   P/X  -   P/D P/P  -   D/D P/P
      D           -   P/X  -   P/D P/P  -   D/D P/P
      P           -   P/X  -   P/D P/P  -   P/D P/P
     push
      D           P/X P/X  P/P P/P P/P  D/D D/D P/P
      P           P/X P/X  P/P P/P P/P  P/P P/P P/P
 
 Legend:
 
     A/B = final state on client / state on server
 
     * N = new/not present,
     * P = public,
     * D = draft,
     * X = not tracked (i.e., the old client or server has no internal
           way of recording the phase.)
 
     passive = only pushes
 
 
     A cell here can be read like this:
 
     "When a new client pushes a draft changeset (D) to a publishing
     server where it's not present (N), it's marked public on both
     sides (P/P)."
 
 Note: old client behave as a publishing server with draft only content
 - other people see it as public
 - content is pushed as draft
 
 """
 
 from __future__ import absolute_import
 
 import errno
 import struct
 
 from .i18n import _
 from .node import (
     bin,
     hex,
     nullid,
     nullrev,
     short,
     wdirrev,
 )
 from .pycompat import (
     getattr,
     setattr,
 )
 from . import (
     error,
     pycompat,
     smartset,
     txnutil,
     util,
 )
 
 _fphasesentry = struct.Struct(b'>i20s')
 
 INTERNAL_FLAG = 64  # Phases for mercurial internal usage only
 HIDEABLE_FLAG = 32  # Phases that are hideable
 
 # record phase index
 public, draft, secret = range(3)
 internal = INTERNAL_FLAG | HIDEABLE_FLAG
 archived = HIDEABLE_FLAG
 allphases = list(range(internal + 1))
 trackedphases = allphases[1:]
 # record phase names
 cmdphasenames = [b'public', b'draft', b'secret']  # known to `hg phase` command
 phasenames = [None] * len(allphases)
 phasenames[: len(cmdphasenames)] = cmdphasenames
 phasenames[archived] = b'archived'
 phasenames[internal] = b'internal'
 # record phase property
 mutablephases = tuple(allphases[1:])
 remotehiddenphases = tuple(allphases[2:])
 localhiddenphases = tuple(p for p in allphases if p & HIDEABLE_FLAG)
 
 
 def supportinternal(repo):
     """True if the internal phase can be used on a repository"""
     return b'internal-phase' in repo.requirements
 
 
 def _readroots(repo, phasedefaults=None):
     """Read phase roots from disk
 
     phasedefaults is a list of fn(repo, roots) callable, which are
     executed if the phase roots file does not exist. When phases are
     being initialized on an existing repository, this could be used to
     set selected changesets phase to something else than public.
 
     Return (roots, dirty) where dirty is true if roots differ from
     what is being stored.
     """
     repo = repo.unfiltered()
     dirty = False
     roots = [set() for i in allphases]
     try:
         f, pending = txnutil.trypending(repo.root, repo.svfs, b'phaseroots')
         try:
             for line in f:
                 phase, nh = line.split()
                 roots[int(phase)].add(bin(nh))
         finally:
             f.close()
     except IOError as inst:
         if inst.errno != errno.ENOENT:
             raise
         if phasedefaults:
             for f in phasedefaults:
                 roots = f(repo, roots)
         dirty = True
     return roots, dirty
 
 
 def binaryencode(phasemapping):
     """encode a 'phase -> nodes' mapping into a binary stream
 
     Since phases are integer the mapping is actually a python list:
     [[PUBLIC_HEADS], [DRAFTS_HEADS], [SECRET_HEADS]]
     """
     binarydata = []
     for phase, nodes in enumerate(phasemapping):
         for head in nodes:
             binarydata.append(_fphasesentry.pack(phase, head))
     return b''.join(binarydata)
 
 
 def binarydecode(stream):
     """decode a binary stream into a 'phase -> nodes' mapping
 
     Since phases are integer the mapping is actually a python list."""
     headsbyphase = [[] for i in allphases]
     entrysize = _fphasesentry.size
     while True:
         entry = stream.read(entrysize)
         if len(entry) < entrysize:
             if entry:
                 raise error.Abort(_(b'bad phase-heads stream'))
             break
         phase, node = _fphasesentry.unpack(entry)
         headsbyphase[phase].append(node)
     return headsbyphase
 
 
 def _sortedrange_insert(data, idx, rev, t):
     merge_before = False
     if idx:
         r1, t1 = data[idx - 1]
         merge_before = r1[-1] + 1 == rev and t1 == t
     merge_after = False
     if idx < len(data):
         r2, t2 = data[idx]
         merge_after = r2[0] == rev + 1 and t2 == t
 
     if merge_before and merge_after:
         data[idx - 1] = (pycompat.xrange(r1[0], r2[-1] + 1), t)
         data.pop(idx)
     elif merge_before:
         data[idx - 1] = (pycompat.xrange(r1[0], rev + 1), t)
     elif merge_after:
         data[idx] = (pycompat.xrange(rev, r2[-1] + 1), t)
     else:
         data.insert(idx, (pycompat.xrange(rev, rev + 1), t))
 
 
 def _sortedrange_split(data, idx, rev, t):
     r1, t1 = data[idx]
     if t == t1:
         return
     t = (t1[0], t[1])
     if len(r1) == 1:
         data.pop(idx)
         _sortedrange_insert(data, idx, rev, t)
     elif r1[0] == rev:
         data[idx] = (pycompat.xrange(rev + 1, r1[-1] + 1), t1)
         _sortedrange_insert(data, idx, rev, t)
     elif r1[-1] == rev:
         data[idx] = (pycompat.xrange(r1[0], rev), t1)
         _sortedrange_insert(data, idx + 1, rev, t)
     else:
         data[idx : idx + 1] = [
             (pycompat.xrange(r1[0], rev), t1),
             (pycompat.xrange(rev, rev + 1), t),
             (pycompat.xrange(rev + 1, r1[-1] + 1), t1),
         ]
 
 
 def _trackphasechange(data, rev, old, new):
     """add a phase move to the <data> list of ranges
 
     If data is None, nothing happens.
     """
     if data is None:
         return
 
     # If data is empty, create a one-revision range and done
     if not data:
         data.insert(0, (pycompat.xrange(rev, rev + 1), (old, new)))
         return
 
     low = 0
     high = len(data)
     t = (old, new)
     while low < high:
         mid = (low + high) // 2
         revs = data[mid][0]
 
         if rev in revs:
             _sortedrange_split(data, mid, rev, t)
             return
 
         if revs[0] == rev + 1:
             if mid and data[mid - 1][0][-1] == rev:
                 _sortedrange_split(data, mid - 1, rev, t)
             else:
                 _sortedrange_insert(data, mid, rev, t)
             return
 
         if revs[-1] == rev - 1:
             if mid + 1 < len(data) and data[mid + 1][0][0] == rev:
                 _sortedrange_split(data, mid + 1, rev, t)
             else:
                 _sortedrange_insert(data, mid + 1, rev, t)
             return
 
         if revs[0] > rev:
             high = mid
         else:
             low = mid + 1
 
     if low == len(data):
         data.append((pycompat.xrange(rev, rev + 1), t))
         return
 
     r1, t1 = data[low]
     if r1[0] > rev:
         data.insert(low, (pycompat.xrange(rev, rev + 1), t))
     else:
         data.insert(low + 1, (pycompat.xrange(rev, rev + 1), t))
 
 
 class phasecache(object):
     def __init__(self, repo, phasedefaults, _load=True):
         if _load:
             # Cheap trick to allow shallow-copy without copy module
             self.phaseroots, self.dirty = _readroots(repo, phasedefaults)
             self._loadedrevslen = 0
             self._phasesets = None
             self.filterunknown(repo)
             self.opener = repo.svfs
 
     def getrevset(self, repo, phases, subset=None):
         """return a smartset for the given phases"""
         self.loadphaserevs(repo)  # ensure phase's sets are loaded
         phases = set(phases)
         publicphase = public in phases
 
         if publicphase:
             # In this case, phases keeps all the *other* phases.
             phases = set(allphases).difference(phases)
             if not phases:
                 return smartset.fullreposet(repo)
 
         # fast path: _phasesets contains the interesting sets,
         # might only need a union and post-filtering.
         revsneedscopy = False
         if len(phases) == 1:
             [p] = phases
             revs = self._phasesets[p]
             revsneedscopy = True  # Don't modify _phasesets
         else:
             # revs has the revisions in all *other* phases.
             revs = set.union(*[self._phasesets[p] for p in phases])
 
         def _addwdir(wdirsubset, wdirrevs):
             if wdirrev in wdirsubset and repo[None].phase() in phases:
                 if revsneedscopy:
                     wdirrevs = wdirrevs.copy()
                 # The working dir would never be in the # cache, but it was in
                 # the subset being filtered for its phase (or filtered out,
                 # depending on publicphase), so add it to the output to be
                 # included (or filtered out).
                 wdirrevs.add(wdirrev)
             return wdirrevs
 
         if not publicphase:
             if repo.changelog.filteredrevs:
                 revs = revs - repo.changelog.filteredrevs
 
             if subset is None:
                 return smartset.baseset(revs)
             else:
                 revs = _addwdir(subset, revs)
                 return subset & smartset.baseset(revs)
         else:
             if subset is None:
                 subset = smartset.fullreposet(repo)
 
             revs = _addwdir(subset, revs)
 
             if not revs:
                 return subset
             return subset.filter(lambda r: r not in revs)
 
     def copy(self):
         # Shallow copy meant to ensure isolation in
         # advance/retractboundary(), nothing more.
         ph = self.__class__(None, None, _load=False)
         ph.phaseroots = self.phaseroots[:]
         ph.dirty = self.dirty
         ph.opener = self.opener
         ph._loadedrevslen = self._loadedrevslen
         ph._phasesets = self._phasesets
         return ph
 
     def replace(self, phcache):
         """replace all values in 'self' with content of phcache"""
         for a in (
             b'phaseroots',
             b'dirty',
             b'opener',
             b'_loadedrevslen',
             b'_phasesets',
         ):
             setattr(self, a, getattr(phcache, a))
 
     def _getphaserevsnative(self, repo):
         repo = repo.unfiltered()
         nativeroots = []
         for phase in trackedphases:
             nativeroots.append(
                 pycompat.maplist(repo.changelog.rev, self.phaseroots[phase])
             )
         return repo.changelog.computephases(nativeroots)
 
     def _computephaserevspure(self, repo):
         repo = repo.unfiltered()
         cl = repo.changelog
         self._phasesets = [set() for phase in allphases]
         lowerroots = set()
         for phase in reversed(trackedphases):
             roots = pycompat.maplist(cl.rev, self.phaseroots[phase])
             if roots:
                 ps = set(cl.descendants(roots))
                 for root in roots:
                     ps.add(root)
                 ps.difference_update(lowerroots)
                 lowerroots.update(ps)
                 self._phasesets[phase] = ps
         self._loadedrevslen = len(cl)
 
     def loadphaserevs(self, repo):
         """ensure phase information is loaded in the object"""
         if self._phasesets is None:
             try:
                 res = self._getphaserevsnative(repo)
                 self._loadedrevslen, self._phasesets = res
             except AttributeError:
                 self._computephaserevspure(repo)
 
     def invalidate(self):
         self._loadedrevslen = 0
         self._phasesets = None
 
     def phase(self, repo, rev):
         # We need a repo argument here to be able to build _phasesets
         # if necessary. The repository instance is not stored in
         # phasecache to avoid reference cycles. The changelog instance
         # is not stored because it is a filecache() property and can
         # be replaced without us being notified.
         if rev == nullrev:
             return public
         if rev < nullrev:
             raise ValueError(_(b'cannot lookup negative revision'))
         if rev >= self._loadedrevslen:
             self.invalidate()
             self.loadphaserevs(repo)
         for phase in trackedphases:
             if rev in self._phasesets[phase]:
                 return phase
         return public
 
     def write(self):
         if not self.dirty:
             return
         f = self.opener(b'phaseroots', b'w', atomictemp=True, checkambig=True)
         try:
             self._write(f)
         finally:
             f.close()
 
     def _write(self, fp):
         for phase, roots in enumerate(self.phaseroots):
             for h in sorted(roots):
                 fp.write(b'%i %s\n' % (phase, hex(h)))
         self.dirty = False
 
     def _updateroots(self, phase, newroots, tr):
         self.phaseroots[phase] = newroots
         self.invalidate()
         self.dirty = True
 
         tr.addfilegenerator(b'phase', (b'phaseroots',), self._write)
         tr.hookargs[b'phases_moved'] = b'1'
 
     def registernew(self, repo, tr, targetphase, nodes):
         repo = repo.unfiltered()
         self._retractboundary(repo, tr, targetphase, nodes)
         if tr is not None and b'phases' in tr.changes:
             phasetracking = tr.changes[b'phases']
             torev = repo.changelog.rev
             phase = self.phase
             revs = [torev(node) for node in nodes]
             revs.sort()
             for rev in revs:
                 revphase = phase(repo, rev)
                 _trackphasechange(phasetracking, rev, None, revphase)
         repo.invalidatevolatilesets()
 
     def advanceboundary(self, repo, tr, targetphase, nodes, dryrun=None):
         """Set all 'nodes' to phase 'targetphase'
 
         Nodes with a phase lower than 'targetphase' are not affected.
 
         If dryrun is True, no actions will be performed
 
         Returns a set of revs whose phase is changed or should be changed
         """
         # Be careful to preserve shallow-copied values: do not update
         # phaseroots values, replace them.
         if tr is None:
             phasetracking = None
         else:
             phasetracking = tr.changes.get(b'phases')
 
         repo = repo.unfiltered()
 
         changes = set()  # set of revisions to be changed
         delroots = []  # set of root deleted by this path
         for phase in pycompat.xrange(targetphase + 1, len(allphases)):
             # filter nodes that are not in a compatible phase already
             nodes = [
                 n for n in nodes if self.phase(repo, repo[n].rev()) >= phase
             ]
             if not nodes:
                 break  # no roots to move anymore
 
             olds = self.phaseroots[phase]
 
             affected = repo.revs(b'%ln::%ln', olds, nodes)
             changes.update(affected)
             if dryrun:
                 continue
             for r in affected:
                 _trackphasechange(
                     phasetracking, r, self.phase(repo, r), targetphase
                 )
 
             roots = {
                 ctx.node()
                 for ctx in repo.set(b'roots((%ln::) - %ld)', olds, affected)
             }
             if olds != roots:
                 self._updateroots(phase, roots, tr)
                 # some roots may need to be declared for lower phases
                 delroots.extend(olds - roots)
         if not dryrun:
             # declare deleted root in the target phase
             if targetphase != 0:
                 self._retractboundary(repo, tr, targetphase, delroots)
             repo.invalidatevolatilesets()
         return changes
 
     def retractboundary(self, repo, tr, targetphase, nodes):
         oldroots = self.phaseroots[: targetphase + 1]
         if tr is None:
             phasetracking = None
         else:
             phasetracking = tr.changes.get(b'phases')
         repo = repo.unfiltered()
         if (
             self._retractboundary(repo, tr, targetphase, nodes)
             and phasetracking is not None
         ):
 
             # find the affected revisions
             new = self.phaseroots[targetphase]
             old = oldroots[targetphase]
             affected = set(repo.revs(b'(%ln::) - (%ln::)', new, old))
 
             # find the phase of the affected revision
             for phase in pycompat.xrange(targetphase, -1, -1):
                 if phase:
                     roots = oldroots[phase]
                     revs = set(repo.revs(b'%ln::%ld', roots, affected))
                     affected -= revs
                 else:  # public phase
                     revs = affected
                 for r in sorted(revs):
                     _trackphasechange(phasetracking, r, phase, targetphase)
         repo.invalidatevolatilesets()
 
     def _retractboundary(self, repo, tr, targetphase, nodes):
         # Be careful to preserve shallow-copied values: do not update
         # phaseroots values, replace them.
         if targetphase in (archived, internal) and not supportinternal(repo):
             name = phasenames[targetphase]
             msg = b'this repository does not support the %s phase' % name
             raise error.ProgrammingError(msg)
 
         repo = repo.unfiltered()
         torev = repo.changelog.rev
         tonode = repo.changelog.node
         currentroots = {torev(node) for node in self.phaseroots[targetphase]}
         finalroots = oldroots = set(currentroots)
         newroots = [torev(node) for node in nodes]
         newroots = [
             rev for rev in newroots if self.phase(repo, rev) < targetphase
         ]
 
         if newroots:
             if nullrev in newroots:
                 raise error.Abort(_(b'cannot change null revision phase'))
             currentroots.update(newroots)
 
             # Only compute new roots for revs above the roots that are being
             # retracted.
             minnewroot = min(newroots)
             aboveroots = [rev for rev in currentroots if rev >= minnewroot]
             updatedroots = repo.revs(b'roots(%ld::)', aboveroots)
 
             finalroots = {rev for rev in currentroots if rev < minnewroot}
             finalroots.update(updatedroots)
         if finalroots != oldroots:
             self._updateroots(
                 targetphase, {tonode(rev) for rev in finalroots}, tr
             )
             return True
         return False
 
     def filterunknown(self, repo):
         """remove unknown nodes from the phase boundary
 
         Nothing is lost as unknown nodes only hold data for their descendants.
         """
         filtered = False
         has_node = repo.changelog.index.has_node  # to filter unknown nodes
         for phase, nodes in enumerate(self.phaseroots):
             missing = sorted(node for node in nodes if not has_node(node))
             if missing:
                 for mnode in missing:
                     repo.ui.debug(
                         b'removing unknown node %s from %i-phase boundary\n'
                         % (short(mnode), phase)
                     )
                 nodes.symmetric_difference_update(missing)
                 filtered = True
         if filtered:
             self.dirty = True
         # filterunknown is called by repo.destroyed, we may have no changes in
         # root but _phasesets contents is certainly invalid (or at least we
         # have not proper way to check that). related to issue 3858.
         #
         # The other caller is __init__ that have no _phasesets initialized
         # anyway. If this change we should consider adding a dedicated
         # "destroyed" function to phasecache or a proper cache key mechanism
         # (see branchmap one)
         self.invalidate()
 
 
 def advanceboundary(repo, tr, targetphase, nodes, dryrun=None):
     """Add nodes to a phase changing other nodes phases if necessary.
 
     This function move boundary *forward* this means that all nodes
     are set in the target phase or kept in a *lower* phase.
 
     Simplify boundary to contains phase roots only.
 
     If dryrun is True, no actions will be performed
 
     Returns a set of revs whose phase is changed or should be changed
     """
     phcache = repo._phasecache.copy()
     changes = phcache.advanceboundary(
         repo, tr, targetphase, nodes, dryrun=dryrun
     )
     if not dryrun:
         repo._phasecache.replace(phcache)
     return changes
 
 
 def retractboundary(repo, tr, targetphase, nodes):
     """Set nodes back to a phase changing other nodes phases if
     necessary.
 
     This function move boundary *backward* this means that all nodes
     are set in the target phase or kept in a *higher* phase.
 
     Simplify boundary to contains phase roots only."""
     phcache = repo._phasecache.copy()
     phcache.retractboundary(repo, tr, targetphase, nodes)
     repo._phasecache.replace(phcache)
 
 
 def registernew(repo, tr, targetphase, nodes):
     """register a new revision and its phase
 
     Code adding revisions to the repository should use this function to
     set new changeset in their target phase (or higher).
     """
     phcache = repo._phasecache.copy()
     phcache.registernew(repo, tr, targetphase, nodes)
     repo._phasecache.replace(phcache)
 
 
 def listphases(repo):
     """List phases root for serialization over pushkey"""
     # Use ordered dictionary so behavior is deterministic.
     keys = util.sortdict()
     value = b'%i' % draft
     cl = repo.unfiltered().changelog
     for root in repo._phasecache.phaseroots[draft]:
         if repo._phasecache.phase(repo, cl.rev(root)) <= draft:
             keys[hex(root)] = value
 
     if repo.publishing():
         # Add an extra data to let remote know we are a publishing
         # repo. Publishing repo can't just pretend they are old repo.
         # When pushing to a publishing repo, the client still need to
         # push phase boundary
         #
         # Push do not only push changeset. It also push phase data.
         # New phase data may apply to common changeset which won't be
         # push (as they are common). Here is a very simple example:
         #
         # 1) repo A push changeset X as draft to repo B
         # 2) repo B make changeset X public
         # 3) repo B push to repo A. X is not pushed but the data that
         #    X as now public should
         #
         # The server can't handle it on it's own as it has no idea of
         # client phase data.
         keys[b'publishing'] = b'True'
     return keys
 
 
 def pushphase(repo, nhex, oldphasestr, newphasestr):
     """List phases root for serialization over pushkey"""
     repo = repo.unfiltered()
     with repo.lock():
         currentphase = repo[nhex].phase()
         newphase = abs(int(newphasestr))  # let's avoid negative index surprise
         oldphase = abs(int(oldphasestr))  # let's avoid negative index surprise
         if currentphase == oldphase and newphase < oldphase:
             with repo.transaction(b'pushkey-phase') as tr:
                 advanceboundary(repo, tr, newphase, [bin(nhex)])
             return True
         elif currentphase == newphase:
             # raced, but got correct result
             return True
         else:
             return False
 
 
 def subsetphaseheads(repo, subset):
     """Finds the phase heads for a subset of a history
 
     Returns a list indexed by phase number where each item is a list of phase
     head nodes.
     """
     cl = repo.changelog
 
     headsbyphase = [[] for i in allphases]
     # No need to keep track of secret phase; any heads in the subset that
     # are not mentioned are implicitly secret.
     for phase in allphases[:secret]:
         revset = b"heads(%%ln & %s())" % phasenames[phase]
         headsbyphase[phase] = [cl.node(r) for r in repo.revs(revset, subset)]
     return headsbyphase
 
 
 def updatephases(repo, trgetter, headsbyphase):
     """Updates the repo with the given phase heads"""
     # Now advance phase boundaries of all but secret phase
     #
     # run the update (and fetch transaction) only if there are actually things
     # to update. This avoid creating empty transaction during no-op operation.
 
     for phase in allphases[:-1]:
         revset = b'%ln - _phase(%s)'
         heads = [c.node() for c in repo.set(revset, headsbyphase[phase], phase)]
         if heads:
             advanceboundary(repo, trgetter(), phase, heads)
 
 
 def analyzeremotephases(repo, subset, roots):
     """Compute phases heads and root in a subset of node from root dict
 
     * subset is heads of the subset
     * roots is {<nodeid> => phase} mapping. key and value are string.
 
     Accept unknown element input
     """
     repo = repo.unfiltered()
     # build list from dictionary
     draftroots = []
     has_node = repo.changelog.index.has_node  # to filter unknown nodes
     for nhex, phase in pycompat.iteritems(roots):
         if nhex == b'publishing':  # ignore data related to publish option
             continue
         node = bin(nhex)
         phase = int(phase)
         if phase == public:
             if node != nullid:
                 repo.ui.warn(
                     _(
                         b'ignoring inconsistent public root'
                         b' from remote: %s\n'
                     )
                     % nhex
                 )
         elif phase == draft:
             if has_node(node):
                 draftroots.append(node)
         else:
             repo.ui.warn(
                 _(b'ignoring unexpected root from remote: %i %s\n')
                 % (phase, nhex)
             )
     # compute heads
     publicheads = newheads(repo, subset, draftroots)
     return publicheads, draftroots
 
 
 class remotephasessummary(object):
     """summarize phase information on the remote side
 
     :publishing: True is the remote is publishing
     :publicheads: list of remote public phase heads (nodes)
     :draftheads: list of remote draft phase heads (nodes)
     :draftroots: list of remote draft phase root (nodes)
     """
 
     def __init__(self, repo, remotesubset, remoteroots):
         unfi = repo.unfiltered()
         self._allremoteroots = remoteroots
 
         self.publishing = remoteroots.get(b'publishing', False)
 
         ana = analyzeremotephases(repo, remotesubset, remoteroots)
         self.publicheads, self.draftroots = ana
         # Get the list of all "heads" revs draft on remote
         dheads = unfi.set(b'heads(%ln::%ln)', self.draftroots, remotesubset)
         self.draftheads = [c.node() for c in dheads]
 
 
 def newheads(repo, heads, roots):
     """compute new head of a subset minus another
 
     * `heads`: define the first subset
     * `roots`: define the second we subtract from the first"""
     # prevent an import cycle
     # phases > dagop > patch > copies > scmutil > obsolete > obsutil > phases
     from . import dagop
 
     repo = repo.unfiltered()
     cl = repo.changelog
     rev = cl.index.get_rev
     if not roots:
         return heads
     if not heads or heads == [nullid]:
         return []
     # The logic operated on revisions, convert arguments early for convenience
     new_heads = {rev(n) for n in heads if n != nullid}
     roots = [rev(n) for n in roots]
     # compute the area we need to remove
     affected_zone = repo.revs(b"(%ld::%ld)", roots, new_heads)
     # heads in the area are no longer heads
     new_heads.difference_update(affected_zone)
     # revisions in the area have children outside of it,
     # They might be new heads
     candidates = repo.revs(
         b"parents(%ld + (%ld and merge())) and not null", roots, affected_zone
     )
     candidates -= affected_zone
     if new_heads or candidates:
         # remove candidate that are ancestors of other heads
         new_heads.update(candidates)
         prunestart = repo.revs(b"parents(%ld) and not null", new_heads)
         pruned = dagop.reachableroots(repo, candidates, prunestart)
         new_heads.difference_update(pruned)
 
     return pycompat.maplist(cl.node, sorted(new_heads))
 
 
 def newcommitphase(ui):
     """helper to get the target phase of new commit
 
     Handle all possible values for the phases.new-commit options.
 
     """
     v = ui.config(b'phases', b'new-commit')
     try:
         return phasenames.index(v)
     except ValueError:
         try:
             return int(v)
         except ValueError:
             msg = _(b"phases.new-commit: not a valid phase name ('%s')")
             raise error.ConfigError(msg % v)
 
 
 def hassecret(repo):
     """utility function that check if a repo have any secret changeset."""
-    return bool(repo._phasecache.phaseroots[2])
+    return bool(repo._phasecache.phaseroots[secret])
 
 
 def preparehookargs(node, old, new):
     if old is None:
         old = b''
     else:
         old = phasenames[old]
     return {b'node': node, b'oldphase': old, b'phase': phasenames[new]}