rebase: use one dirstateguard for when using rebase.singletransaction

This was previously landed as 2519994d25ca but backed out in b63351f6a2 because
it broke hooks mid-rebase and caused conflict resolution data loss in the event
of unexpected exceptions. This new version adds the behavior back but behind a
config flag, since the performance improvement is notable in large repositories.

The old commit message was:

Recently we switched rebases to run the entire rebase inside a single
transaction, which dramatically improved the speed of rebases in repos with
large working copies. Let's also move the dirstate into a single dirstateguard
to get the same benefits. This let's us avoid serializing the dirstate after
each commit.

In a large repo, rebasing 27 commits is sped up by about 20%.

I believe the test changes are because us touching the dirstate gave the
transaction something to actually rollback.
(grafted from 9e3dc3a1638b9754b58a0cb26aaa75d868058109)
(grafted from 7d38b41d2266d9a02a15c64229fae0da5738dcec)

Differential Revision: https://phab.mercurial-scm.org/D135

hgext/rebase.py

@@ -1,1540 +1,1550 b''
 # rebase.py - rebasing feature for mercurial
 #
 # Copyright 2008 Stefano Tortarolo <stefano.tortarolo at gmail dot com>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 '''command to move sets of revisions to a different ancestor
 
 This extension lets you rebase changesets in an existing Mercurial
 repository.
 
 For more information:
 https://mercurial-scm.org/wiki/RebaseExtension
 '''
 
 from __future__ import absolute_import
 
 import errno
 import os
 
 from mercurial.i18n import _
 from mercurial.node import (
     hex,
     nullid,
     nullrev,
     short,
 )
 from mercurial import (
     bookmarks,
     cmdutil,
     commands,
     copies,
     destutil,
     dirstateguard,
     error,
     extensions,
     hg,
     lock,
     merge as mergemod,
     mergeutil,
     obsolete,
     obsutil,
     patch,
     phases,
     registrar,
     repair,
     repoview,
     revset,
     scmutil,
     smartset,
     util,
 )
 
 release = lock.release
 templateopts = cmdutil.templateopts
 
 # The following constants are used throughout the rebase module. The ordering of
 # their values must be maintained.
 
 # Indicates that a revision needs to be rebased
 revtodo = -1
 nullmerge = -2
 revignored = -3
 # successor in rebase destination
 revprecursor = -4
 # plain prune (no successor)
 revpruned = -5
 revskipped = (revignored, revprecursor, revpruned)
 
 cmdtable = {}
 command = registrar.command(cmdtable)
 # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
 # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
 # be specifying the version(s) of Mercurial they are tested with, or
 # leave the attribute unspecified.
 testedwith = 'ships-with-hg-core'
 
 def _nothingtorebase():
     return 1
 
 def _savegraft(ctx, extra):
     s = ctx.extra().get('source', None)
     if s is not None:
         extra['source'] = s
     s = ctx.extra().get('intermediate-source', None)
     if s is not None:
         extra['intermediate-source'] = s
 
 def _savebranch(ctx, extra):
     extra['branch'] = ctx.branch()
 
 def _makeextrafn(copiers):
     """make an extrafn out of the given copy-functions.
 
     A copy function takes a context and an extra dict, and mutates the
     extra dict as needed based on the given context.
     """
     def extrafn(ctx, extra):
         for c in copiers:
             c(ctx, extra)
     return extrafn
 
 def _destrebase(repo, sourceset, destspace=None):
     """small wrapper around destmerge to pass the right extra args
 
     Please wrap destutil.destmerge instead."""
     return destutil.destmerge(repo, action='rebase', sourceset=sourceset,
                               onheadcheck=False, destspace=destspace)
 
 revsetpredicate = registrar.revsetpredicate()
 
 @revsetpredicate('_destrebase')
 def _revsetdestrebase(repo, subset, x):
     # ``_rebasedefaultdest()``
 
     # default destination for rebase.
     # # XXX: Currently private because I expect the signature to change.
     # # XXX: - bailing out in case of ambiguity vs returning all data.
     # i18n: "_rebasedefaultdest" is a keyword
     sourceset = None
     if x is not None:
         sourceset = revset.getset(repo, smartset.fullreposet(repo), x)
     return subset & smartset.baseset([_destrebase(repo, sourceset)])
 
 class rebaseruntime(object):
     """This class is a container for rebase runtime state"""
     def __init__(self, repo, ui, opts=None):
         if opts is None:
             opts = {}
 
         self.repo = repo
         self.ui = ui
         self.opts = opts
         self.originalwd = None
         self.external = nullrev
         # Mapping between the old revision id and either what is the new rebased
         # revision or what needs to be done with the old revision. The state
         # dict will be what contains most of the rebase progress state.
         self.state = {}
         self.activebookmark = None
         self.dest = None
         self.skipped = set()
         self.destancestors = set()
 
         self.collapsef = opts.get('collapse', False)
         self.collapsemsg = cmdutil.logmessage(ui, opts)
         self.date = opts.get('date', None)
 
         e = opts.get('extrafn') # internal, used by e.g. hgsubversion
         self.extrafns = [_savegraft]
         if e:
             self.extrafns = [e]
 
         self.keepf = opts.get('keep', False)
         self.keepbranchesf = opts.get('keepbranches', False)
         # keepopen is not meant for use on the command line, but by
         # other extensions
         self.keepopen = opts.get('keepopen', False)
         self.obsoletenotrebased = {}
 
     def storestatus(self, tr=None):
         """Store the current status to allow recovery"""
         if tr:
             tr.addfilegenerator('rebasestate', ('rebasestate',),
                                 self._writestatus, location='plain')
         else:
             with self.repo.vfs("rebasestate", "w") as f:
                 self._writestatus(f)
 
     def _writestatus(self, f):
         repo = self.repo.unfiltered()
         f.write(repo[self.originalwd].hex() + '\n')
         f.write(repo[self.dest].hex() + '\n')
         f.write(repo[self.external].hex() + '\n')
         f.write('%d\n' % int(self.collapsef))
         f.write('%d\n' % int(self.keepf))
         f.write('%d\n' % int(self.keepbranchesf))
         f.write('%s\n' % (self.activebookmark or ''))
         for d, v in self.state.iteritems():
             oldrev = repo[d].hex()
             if v >= 0:
                 newrev = repo[v].hex()
             elif v == revtodo:
                 # To maintain format compatibility, we have to use nullid.
                 # Please do remove this special case when upgrading the format.
                 newrev = hex(nullid)
             else:
                 newrev = v
             f.write("%s:%s\n" % (oldrev, newrev))
         repo.ui.debug('rebase status stored\n')
 
     def restorestatus(self):
         """Restore a previously stored status"""
         repo = self.repo
         keepbranches = None
         dest = None
         collapse = False
         external = nullrev
         activebookmark = None
         state = {}
 
         try:
             f = repo.vfs("rebasestate")
             for i, l in enumerate(f.read().splitlines()):
                 if i == 0:
                     originalwd = repo[l].rev()
                 elif i == 1:
                     dest = repo[l].rev()
                 elif i == 2:
                     external = repo[l].rev()
                 elif i == 3:
                     collapse = bool(int(l))
                 elif i == 4:
                     keep = bool(int(l))
                 elif i == 5:
                     keepbranches = bool(int(l))
                 elif i == 6 and not (len(l) == 81 and ':' in l):
                     # line 6 is a recent addition, so for backwards
                     # compatibility check that the line doesn't look like the
                     # oldrev:newrev lines
                     activebookmark = l
                 else:
                     oldrev, newrev = l.split(':')
                     if newrev in (str(nullmerge), str(revignored),
                                   str(revprecursor), str(revpruned)):
                         state[repo[oldrev].rev()] = int(newrev)
                     elif newrev == nullid:
                         state[repo[oldrev].rev()] = revtodo
                         # Legacy compat special case
                     else:
                         state[repo[oldrev].rev()] = repo[newrev].rev()
 
         except IOError as err:
             if err.errno != errno.ENOENT:
                 raise
             cmdutil.wrongtooltocontinue(repo, _('rebase'))
 
         if keepbranches is None:
             raise error.Abort(_('.hg/rebasestate is incomplete'))
 
         skipped = set()
         # recompute the set of skipped revs
         if not collapse:
             seen = {dest}
             for old, new in sorted(state.items()):
                 if new != revtodo and new in seen:
                     skipped.add(old)
                 seen.add(new)
         repo.ui.debug('computed skipped revs: %s\n' %
                         (' '.join(str(r) for r in sorted(skipped)) or None))
         repo.ui.debug('rebase status resumed\n')
         _setrebasesetvisibility(repo, set(state.keys()) | {originalwd})
 
         self.originalwd = originalwd
         self.dest = dest
         self.state = state
         self.skipped = skipped
         self.collapsef = collapse
         self.keepf = keep
         self.keepbranchesf = keepbranches
         self.external = external
         self.activebookmark = activebookmark
 
     def _handleskippingobsolete(self, rebaserevs, obsoleterevs, dest):
         """Compute structures necessary for skipping obsolete revisions
 
         rebaserevs:     iterable of all revisions that are to be rebased
         obsoleterevs:   iterable of all obsolete revisions in rebaseset
         dest:           a destination revision for the rebase operation
         """
         self.obsoletenotrebased = {}
         if not self.ui.configbool('experimental', 'rebaseskipobsolete',
                                   default=True):
             return
         rebaseset = set(rebaserevs)
         obsoleteset = set(obsoleterevs)
         self.obsoletenotrebased = _computeobsoletenotrebased(self.repo,
                                     obsoleteset, dest)
         skippedset = set(self.obsoletenotrebased)
         _checkobsrebase(self.repo, self.ui, obsoleteset, rebaseset, skippedset)
 
     def _prepareabortorcontinue(self, isabort):
         try:
             self.restorestatus()
             self.collapsemsg = restorecollapsemsg(self.repo, isabort)
         except error.RepoLookupError:
             if isabort:
                 clearstatus(self.repo)
                 clearcollapsemsg(self.repo)
                 self.repo.ui.warn(_('rebase aborted (no revision is removed,'
                                     ' only broken state is cleared)\n'))
                 return 0
             else:
                 msg = _('cannot continue inconsistent rebase')
                 hint = _('use "hg rebase --abort" to clear broken state')
                 raise error.Abort(msg, hint=hint)
         if isabort:
             return abort(self.repo, self.originalwd, self.dest,
                          self.state, activebookmark=self.activebookmark)
 
         obsrevs = (r for r, st in self.state.items() if st == revprecursor)
         self._handleskippingobsolete(self.state.keys(), obsrevs, self.dest)
 
     def _preparenewrebase(self, dest, rebaseset):
         if dest is None:
             return _nothingtorebase()
 
         allowunstable = obsolete.isenabled(self.repo, obsolete.allowunstableopt)
         if (not (self.keepf or allowunstable)
               and self.repo.revs('first(children(%ld) - %ld)',
                                  rebaseset, rebaseset)):
             raise error.Abort(
                 _("can't remove original changesets with"
                   " unrebased descendants"),
                 hint=_('use --keep to keep original changesets'))
 
         obsrevs = _filterobsoleterevs(self.repo, set(rebaseset))
         self._handleskippingobsolete(rebaseset, obsrevs, dest.rev())
 
         result = buildstate(self.repo, dest, rebaseset, self.collapsef,
                             self.obsoletenotrebased)
 
         if not result:
             # Empty state built, nothing to rebase
             self.ui.status(_('nothing to rebase\n'))
             return _nothingtorebase()
 
         for root in self.repo.set('roots(%ld)', rebaseset):
             if not self.keepf and not root.mutable():
                 raise error.Abort(_("can't rebase public changeset %s")
                                   % root,
                                   hint=_("see 'hg help phases' for details"))
 
         (self.originalwd, self.dest, self.state) = result
         if self.collapsef:
             self.destancestors = self.repo.changelog.ancestors(
                                         [self.dest],
                                         inclusive=True)
             self.external = externalparent(self.repo, self.state,
                                               self.destancestors)
 
         if dest.closesbranch() and not self.keepbranchesf:
             self.ui.status(_('reopening closed branch head %s\n') % dest)
 
     def _performrebase(self, tr):
         repo, ui, opts = self.repo, self.ui, self.opts
         if self.keepbranchesf:
             # insert _savebranch at the start of extrafns so if
             # there's a user-provided extrafn it can clobber branch if
             # desired
             self.extrafns.insert(0, _savebranch)
             if self.collapsef:
                 branches = set()
                 for rev in self.state:
                     branches.add(repo[rev].branch())
                     if len(branches) > 1:
                         raise error.Abort(_('cannot collapse multiple named '
                             'branches'))
 
         # Rebase
         if not self.destancestors:
             self.destancestors = repo.changelog.ancestors([self.dest],
                                                           inclusive=True)
 
         # Keep track of the active bookmarks in order to reset them later
         self.activebookmark = self.activebookmark or repo._activebookmark
         if self.activebookmark:
             bookmarks.deactivate(repo)
 
         # Store the state before we begin so users can run 'hg rebase --abort'
         # if we fail before the transaction closes.
         self.storestatus()
 
         sortedrevs = repo.revs('sort(%ld, -topo)', self.state)
         cands = [k for k, v in self.state.iteritems() if v == revtodo]
         total = len(cands)
         pos = 0
         for rev in sortedrevs:
             ctx = repo[rev]
             desc = '%d:%s "%s"' % (ctx.rev(), ctx,
                                    ctx.description().split('\n', 1)[0])
             names = repo.nodetags(ctx.node()) + repo.nodebookmarks(ctx.node())
             if names:
                 desc += ' (%s)' % ' '.join(names)
             if self.state[rev] == rev:
                 ui.status(_('already rebased %s\n') % desc)
             elif self.state[rev] == revtodo:
                 pos += 1
                 ui.status(_('rebasing %s\n') % desc)
                 ui.progress(_("rebasing"), pos, ("%d:%s" % (rev, ctx)),
                             _('changesets'), total)
                 p1, p2, base = defineparents(repo, rev, self.dest,
                                              self.state,
                                              self.destancestors,
                                              self.obsoletenotrebased)
                 self.storestatus(tr=tr)
                 storecollapsemsg(repo, self.collapsemsg)
                 if len(repo[None].parents()) == 2:
                     repo.ui.debug('resuming interrupted rebase\n')
                 else:
                     try:
                         ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                                      'rebase')
                         stats = rebasenode(repo, rev, p1, base, self.state,
                                            self.collapsef, self.dest)
                         if stats and stats[3] > 0:
                             raise error.InterventionRequired(
                                 _('unresolved conflicts (see hg '
                                   'resolve, then hg rebase --continue)'))
                     finally:
                         ui.setconfig('ui', 'forcemerge', '', 'rebase')
                 if not self.collapsef:
                     merging = p2 != nullrev
                     editform = cmdutil.mergeeditform(merging, 'rebase')
                     editor = cmdutil.getcommiteditor(editform=editform, **opts)
                     newnode = concludenode(repo, rev, p1, p2,
                                            extrafn=_makeextrafn(self.extrafns),
                                            editor=editor,
                                            keepbranches=self.keepbranchesf,
                                            date=self.date)
                     if newnode is None:
                         # If it ended up being a no-op commit, then the normal
                         # merge state clean-up path doesn't happen, so do it
                         # here. Fix issue5494
                         mergemod.mergestate.clean(repo)
                 else:
                     # Skip commit if we are collapsing
                     repo.setparents(repo[p1].node())
                     newnode = None
                 # Update the state
                 if newnode is not None:
                     self.state[rev] = repo[newnode].rev()
                     ui.debug('rebased as %s\n' % short(newnode))
                 else:
                     if not self.collapsef:
                         ui.warn(_('note: rebase of %d:%s created no changes '
                                   'to commit\n') % (rev, ctx))
                         self.skipped.add(rev)
                     self.state[rev] = p1
                     ui.debug('next revision set to %s\n' % p1)
             elif self.state[rev] == nullmerge:
                 ui.debug('ignoring null merge rebase of %s\n' % rev)
             elif self.state[rev] == revignored:
                 ui.status(_('not rebasing ignored %s\n') % desc)
             elif self.state[rev] == revprecursor:
                 destctx = repo[self.obsoletenotrebased[rev]]
                 descdest = '%d:%s "%s"' % (destctx.rev(), destctx,
                            destctx.description().split('\n', 1)[0])
                 msg = _('note: not rebasing %s, already in destination as %s\n')
                 ui.status(msg % (desc, descdest))
             elif self.state[rev] == revpruned:
                 msg = _('note: not rebasing %s, it has no successor\n')
                 ui.status(msg % desc)
             else:
                 ui.status(_('already rebased %s as %s\n') %
                           (desc, repo[self.state[rev]]))
 
         ui.progress(_('rebasing'), None)
         ui.note(_('rebase merging completed\n'))
 
     def _finishrebase(self):
         repo, ui, opts = self.repo, self.ui, self.opts
         if self.collapsef and not self.keepopen:
             p1, p2, _base = defineparents(repo, min(self.state),
                                           self.dest, self.state,
                                           self.destancestors,
                                           self.obsoletenotrebased)
             editopt = opts.get('edit')
             editform = 'rebase.collapse'
             if self.collapsemsg:
                 commitmsg = self.collapsemsg
             else:
                 commitmsg = 'Collapsed revision'
                 for rebased in self.state:
                     if rebased not in self.skipped and\
                        self.state[rebased] > nullmerge:
                         commitmsg += '\n* %s' % repo[rebased].description()
                 editopt = True
             editor = cmdutil.getcommiteditor(edit=editopt, editform=editform)
             revtoreuse = max(self.state)
+
+            dsguard = None
+            if ui.configbool('rebase', 'singletransaction'):
+                dsguard = dirstateguard.dirstateguard(repo, 'rebase')
+            with util.acceptintervention(dsguard):
             newnode = concludenode(repo, revtoreuse, p1, self.external,
                                    commitmsg=commitmsg,
                                    extrafn=_makeextrafn(self.extrafns),
                                    editor=editor,
                                    keepbranches=self.keepbranchesf,
                                    date=self.date)
             if newnode is None:
                 newrev = self.dest
             else:
                 newrev = repo[newnode].rev()
             for oldrev in self.state.iterkeys():
                 if self.state[oldrev] > nullmerge:
                     self.state[oldrev] = newrev
 
         if 'qtip' in repo.tags():
             updatemq(repo, self.state, self.skipped, **opts)
 
         # restore original working directory
         # (we do this before stripping)
         newwd = self.state.get(self.originalwd, self.originalwd)
         if newwd == revprecursor:
             newwd = self.obsoletenotrebased[self.originalwd]
         elif newwd < 0:
             # original directory is a parent of rebase set root or ignored
             newwd = self.originalwd
         if newwd not in [c.rev() for c in repo[None].parents()]:
             ui.note(_("update back to initial working directory parent\n"))
             hg.updaterepo(repo, newwd, False)
 
         if not self.keepf:
             collapsedas = None
             if self.collapsef:
                 collapsedas = newnode
             clearrebased(ui, repo, self.dest, self.state, self.skipped,
                          collapsedas)
 
         clearstatus(repo)
         clearcollapsemsg(repo)
 
         ui.note(_("rebase completed\n"))
         util.unlinkpath(repo.sjoin('undo'), ignoremissing=True)
         if self.skipped:
             skippedlen = len(self.skipped)
             ui.note(_("%d revisions have been skipped\n") % skippedlen)
 
         if (self.activebookmark and self.activebookmark in repo._bookmarks and
             repo['.'].node() == repo._bookmarks[self.activebookmark]):
                 bookmarks.activate(repo, self.activebookmark)
 
 @command('rebase',
     [('s', 'source', '',
      _('rebase the specified changeset and descendants'), _('REV')),
     ('b', 'base', '',
      _('rebase everything from branching point of specified changeset'),
      _('REV')),
     ('r', 'rev', [],
      _('rebase these revisions'),
      _('REV')),
     ('d', 'dest', '',
      _('rebase onto the specified changeset'), _('REV')),
     ('', 'collapse', False, _('collapse the rebased changesets')),
     ('m', 'message', '',
      _('use text as collapse commit message'), _('TEXT')),
     ('e', 'edit', False, _('invoke editor on commit messages')),
     ('l', 'logfile', '',
      _('read collapse commit message from file'), _('FILE')),
     ('k', 'keep', False, _('keep original changesets')),
     ('', 'keepbranches', False, _('keep original branch names')),
     ('D', 'detach', False, _('(DEPRECATED)')),
     ('i', 'interactive', False, _('(DEPRECATED)')),
     ('t', 'tool', '', _('specify merge tool')),
     ('c', 'continue', False, _('continue an interrupted rebase')),
     ('a', 'abort', False, _('abort an interrupted rebase'))] +
      templateopts,
     _('[-s REV | -b REV] [-d REV] [OPTION]'))
 def rebase(ui, repo, **opts):
     """move changeset (and descendants) to a different branch
 
     Rebase uses repeated merging to graft changesets from one part of
     history (the source) onto another (the destination). This can be
     useful for linearizing *local* changes relative to a master
     development tree.
 
     Published commits cannot be rebased (see :hg:`help phases`).
     To copy commits, see :hg:`help graft`.
 
     If you don't specify a destination changeset (``-d/--dest``), rebase
     will use the same logic as :hg:`merge` to pick a destination.  if
     the current branch contains exactly one other head, the other head
     is merged with by default.  Otherwise, an explicit revision with
     which to merge with must be provided.  (destination changeset is not
     modified by rebasing, but new changesets are added as its
     descendants.)
 
     Here are the ways to select changesets:
 
       1. Explicitly select them using ``--rev``.
 
       2. Use ``--source`` to select a root changeset and include all of its
          descendants.
 
       3. Use ``--base`` to select a changeset; rebase will find ancestors
          and their descendants which are not also ancestors of the destination.
 
       4. If you do not specify any of ``--rev``, ``source``, or ``--base``,
          rebase will use ``--base .`` as above.
 
     Rebase will destroy original changesets unless you use ``--keep``.
     It will also move your bookmarks (even if you do).
 
     Some changesets may be dropped if they do not contribute changes
     (e.g. merges from the destination branch).
 
     Unlike ``merge``, rebase will do nothing if you are at the branch tip of
     a named branch with two heads. You will need to explicitly specify source
     and/or destination.
 
     If you need to use a tool to automate merge/conflict decisions, you
     can specify one with ``--tool``, see :hg:`help merge-tools`.
     As a caveat: the tool will not be used to mediate when a file was
     deleted, there is no hook presently available for this.
 
     If a rebase is interrupted to manually resolve a conflict, it can be
     continued with --continue/-c or aborted with --abort/-a.
 
     .. container:: verbose
 
       Examples:
 
       - move "local changes" (current commit back to branching point)
         to the current branch tip after a pull::
 
           hg rebase
 
       - move a single changeset to the stable branch::
 
           hg rebase -r 5f493448 -d stable
 
       - splice a commit and all its descendants onto another part of history::
 
           hg rebase --source c0c3 --dest 4cf9
 
       - rebase everything on a branch marked by a bookmark onto the
         default branch::
 
           hg rebase --base myfeature --dest default
 
       - collapse a sequence of changes into a single commit::
 
           hg rebase --collapse -r 1520:1525 -d .
 
       - move a named branch while preserving its name::
 
           hg rebase -r "branch(featureX)" -d 1.3 --keepbranches
 
     Configuration Options:
 
     You can make rebase require a destination if you set the following config
     option::
 
       [commands]
       rebase.requiredest = True
 
     By default, rebase will close the transaction after each commit. For
     performance purposes, you can configure rebase to use a single transaction
     across the entire rebase. WARNING: This setting introduces a significant
     risk of losing the work you've done in a rebase if the rebase aborts
     unexpectedly::
 
       [rebase]
       singletransaction = True
 
     Return Values:
 
     Returns 0 on success, 1 if nothing to rebase or there are
     unresolved conflicts.
 
     """
     rbsrt = rebaseruntime(repo, ui, opts)
 
     with repo.wlock(), repo.lock():
         # Validate input and define rebasing points
         destf = opts.get('dest', None)
         srcf = opts.get('source', None)
         basef = opts.get('base', None)
         revf = opts.get('rev', [])
         # search default destination in this space
         # used in the 'hg pull --rebase' case, see issue 5214.
         destspace = opts.get('_destspace')
         contf = opts.get('continue')
         abortf = opts.get('abort')
         if opts.get('interactive'):
             try:
                 if extensions.find('histedit'):
                     enablehistedit = ''
             except KeyError:
                 enablehistedit = " --config extensions.histedit="
             help = "hg%s help -e histedit" % enablehistedit
             msg = _("interactive history editing is supported by the "
                     "'histedit' extension (see \"%s\")") % help
             raise error.Abort(msg)
 
         if rbsrt.collapsemsg and not rbsrt.collapsef:
             raise error.Abort(
                 _('message can only be specified with collapse'))
 
         if contf or abortf:
             if contf and abortf:
                 raise error.Abort(_('cannot use both abort and continue'))
             if rbsrt.collapsef:
                 raise error.Abort(
                     _('cannot use collapse with continue or abort'))
             if srcf or basef or destf:
                 raise error.Abort(
                     _('abort and continue do not allow specifying revisions'))
             if abortf and opts.get('tool', False):
                 ui.warn(_('tool option will be ignored\n'))
             if contf:
                 ms = mergemod.mergestate.read(repo)
                 mergeutil.checkunresolved(ms)
 
             retcode = rbsrt._prepareabortorcontinue(abortf)
             if retcode is not None:
                 return retcode
         else:
             dest, rebaseset = _definesets(ui, repo, destf, srcf, basef, revf,
                                           destspace=destspace)
             retcode = rbsrt._preparenewrebase(dest, rebaseset)
             if retcode is not None:
                 return retcode
 
         tr = None
-        if ui.configbool('rebase', 'singletransaction'):
+        dsguard = None
+
+        singletr = ui.configbool('rebase', 'singletransaction')
+        if singletr:
             tr = repo.transaction('rebase')
         with util.acceptintervention(tr):
+            if singletr:
+                dsguard = dirstateguard.dirstateguard(repo, 'rebase')
+            with util.acceptintervention(dsguard):
             rbsrt._performrebase(tr)
 
         rbsrt._finishrebase()
 
 def _definesets(ui, repo, destf=None, srcf=None, basef=None, revf=None,
                 destspace=None):
     """use revisions argument to define destination and rebase set
     """
     if revf is None:
         revf = []
 
     # destspace is here to work around issues with `hg pull --rebase` see
     # issue5214 for details
     if srcf and basef:
         raise error.Abort(_('cannot specify both a source and a base'))
     if revf and basef:
         raise error.Abort(_('cannot specify both a revision and a base'))
     if revf and srcf:
         raise error.Abort(_('cannot specify both a revision and a source'))
 
     cmdutil.checkunfinished(repo)
     cmdutil.bailifchanged(repo)
 
     if ui.configbool('commands', 'rebase.requiredest') and not destf:
         raise error.Abort(_('you must specify a destination'),
                           hint=_('use: hg rebase -d REV'))
 
     if destf:
         dest = scmutil.revsingle(repo, destf)
 
     if revf:
         rebaseset = scmutil.revrange(repo, revf)
         if not rebaseset:
             ui.status(_('empty "rev" revision set - nothing to rebase\n'))
             return None, None
     elif srcf:
         src = scmutil.revrange(repo, [srcf])
         if not src:
             ui.status(_('empty "source" revision set - nothing to rebase\n'))
             return None, None
         rebaseset = repo.revs('(%ld)::', src)
         assert rebaseset
     else:
         base = scmutil.revrange(repo, [basef or '.'])
         if not base:
             ui.status(_('empty "base" revision set - '
                         "can't compute rebase set\n"))
             return None, None
         if not destf:
             dest = repo[_destrebase(repo, base, destspace=destspace)]
             destf = str(dest)
 
         roots = [] # selected children of branching points
         bpbase = {} # {branchingpoint: [origbase]}
         for b in base: # group bases by branching points
             bp = repo.revs('ancestor(%d, %d)', b, dest).first()
             bpbase[bp] = bpbase.get(bp, []) + [b]
         if None in bpbase:
             # emulate the old behavior, showing "nothing to rebase" (a better
             # behavior may be abort with "cannot find branching point" error)
             bpbase.clear()
         for bp, bs in bpbase.iteritems(): # calculate roots
             roots += list(repo.revs('children(%d) & ancestors(%ld)', bp, bs))
 
         rebaseset = repo.revs('%ld::', roots)
 
         if not rebaseset:
             # transform to list because smartsets are not comparable to
             # lists. This should be improved to honor laziness of
             # smartset.
             if list(base) == [dest.rev()]:
                 if basef:
                     ui.status(_('nothing to rebase - %s is both "base"'
                                 ' and destination\n') % dest)
                 else:
                     ui.status(_('nothing to rebase - working directory '
                                 'parent is also destination\n'))
             elif not repo.revs('%ld - ::%d', base, dest):
                 if basef:
                     ui.status(_('nothing to rebase - "base" %s is '
                                 'already an ancestor of destination '
                                 '%s\n') %
                               ('+'.join(str(repo[r]) for r in base),
                                dest))
                 else:
                     ui.status(_('nothing to rebase - working '
                                 'directory parent is already an '
                                 'ancestor of destination %s\n') % dest)
             else: # can it happen?
                 ui.status(_('nothing to rebase from %s to %s\n') %
                           ('+'.join(str(repo[r]) for r in base), dest))
             return None, None
 
     if not destf:
         dest = repo[_destrebase(repo, rebaseset, destspace=destspace)]
         destf = str(dest)
 
     return dest, rebaseset
 
 def externalparent(repo, state, destancestors):
     """Return the revision that should be used as the second parent
     when the revisions in state is collapsed on top of destancestors.
     Abort if there is more than one parent.
     """
     parents = set()
     source = min(state)
     for rev in state:
         if rev == source:
             continue
         for p in repo[rev].parents():
             if (p.rev() not in state
                         and p.rev() not in destancestors):
                 parents.add(p.rev())
     if not parents:
         return nullrev
     if len(parents) == 1:
         return parents.pop()
     raise error.Abort(_('unable to collapse on top of %s, there is more '
                        'than one external parent: %s') %
                      (max(destancestors),
                       ', '.join(str(p) for p in sorted(parents))))
 
 def concludenode(repo, rev, p1, p2, commitmsg=None, editor=None, extrafn=None,
                  keepbranches=False, date=None):
     '''Commit the wd changes with parents p1 and p2. Reuse commit info from rev
     but also store useful information in extra.
     Return node of committed revision.'''
+    dsguard = util.nullcontextmanager()
+    if not repo.ui.configbool('rebase', 'singletransaction'):
     dsguard = dirstateguard.dirstateguard(repo, 'rebase')
-    try:
+    with dsguard:
         repo.setparents(repo[p1].node(), repo[p2].node())
         ctx = repo[rev]
         if commitmsg is None:
             commitmsg = ctx.description()
         keepbranch = keepbranches and repo[p1].branch() != ctx.branch()
         extra = {'rebase_source': ctx.hex()}
         if extrafn:
             extrafn(ctx, extra)
 
         destphase = max(ctx.phase(), phases.draft)
         overrides = {('phases', 'new-commit'): destphase}
         with repo.ui.configoverride(overrides, 'rebase'):
             if keepbranch:
                 repo.ui.setconfig('ui', 'allowemptycommit', True)
             # Commit might fail if unresolved files exist
             if date is None:
                 date = ctx.date()
             newnode = repo.commit(text=commitmsg, user=ctx.user(),
                                   date=date, extra=extra, editor=editor)
 
         repo.dirstate.setbranch(repo[newnode].branch())
-        dsguard.close()
         return newnode
-    finally:
-        release(dsguard)
 
 def rebasenode(repo, rev, p1, base, state, collapse, dest):
     'Rebase a single revision rev on top of p1 using base as merge ancestor'
     # Merge phase
     # Update to destination and merge it with local
     if repo['.'].rev() != p1:
         repo.ui.debug(" update to %d:%s\n" % (p1, repo[p1]))
         mergemod.update(repo, p1, False, True)
     else:
         repo.ui.debug(" already in destination\n")
     repo.dirstate.write(repo.currenttransaction())
     repo.ui.debug(" merge against %d:%s\n" % (rev, repo[rev]))
     if base is not None:
         repo.ui.debug("   detach base %d:%s\n" % (base, repo[base]))
     # When collapsing in-place, the parent is the common ancestor, we
     # have to allow merging with it.
     stats = mergemod.update(repo, rev, True, True, base, collapse,
                             labels=['dest', 'source'])
     if collapse:
         copies.duplicatecopies(repo, rev, dest)
     else:
         # If we're not using --collapse, we need to
         # duplicate copies between the revision we're
         # rebasing and its first parent, but *not*
         # duplicate any copies that have already been
         # performed in the destination.
         p1rev = repo[rev].p1().rev()
         copies.duplicatecopies(repo, rev, p1rev, skiprev=dest)
     return stats
 
 def adjustdest(repo, rev, dest, state):
     """adjust rebase destination given the current rebase state
 
     rev is what is being rebased. Return a list of two revs, which are the
     adjusted destinations for rev's p1 and p2, respectively. If a parent is
     nullrev, return dest without adjustment for it.
 
     For example, when doing rebase -r B+E -d F, rebase will first move B to B1,
     and E's destination will be adjusted from F to B1.
 
         B1 <- written during rebasing B
         |
         F <- original destination of B, E
         |
         | E <- rev, which is being rebased
         | |
         | D <- prev, one parent of rev being checked
         | |
         | x <- skipped, ex. no successor or successor in (::dest)
         | |
         | C
         | |
         | B <- rebased as B1
         |/
         A
 
     Another example about merge changeset, rebase -r C+G+H -d K, rebase will
     first move C to C1, G to G1, and when it's checking H, the adjusted
     destinations will be [C1, G1].
 
             H       C1 G1
            /|       | /
           F G       |/
         K | |  ->   K
         | C D       |
         | |/        |
         | B         | ...
         |/          |/
         A           A
     """
     result = []
     for prev in repo.changelog.parentrevs(rev):
         adjusted = dest
         if prev != nullrev:
             # pick already rebased revs from state
             source = [s for s, d in state.items() if d > 0]
             candidate = repo.revs('max(%ld and (::%d))', source, prev).first()
             if candidate is not None:
                 adjusted = state[candidate]
         result.append(adjusted)
     return result
 
 def nearestrebased(repo, rev, state):
     """return the nearest ancestors of rev in the rebase result"""
     rebased = [r for r in state if state[r] > nullmerge]
     candidates = repo.revs('max(%ld  and (::%d))', rebased, rev)
     if candidates:
         return state[candidates.first()]
     else:
         return None
 
 def _checkobsrebase(repo, ui, rebaseobsrevs, rebasesetrevs, rebaseobsskipped):
     """
     Abort if rebase will create divergence or rebase is noop because of markers
 
     `rebaseobsrevs`: set of obsolete revision in source
     `rebasesetrevs`: set of revisions to be rebased from source
     `rebaseobsskipped`: set of revisions from source skipped because they have
     successors in destination
     """
     # Obsolete node with successors not in dest leads to divergence
     divergenceok = ui.configbool('experimental',
                                  'allowdivergence')
     divergencebasecandidates = rebaseobsrevs - rebaseobsskipped
 
     if divergencebasecandidates and not divergenceok:
         divhashes = (str(repo[r])
                      for r in divergencebasecandidates)
         msg = _("this rebase will cause "
                 "divergences from: %s")
         h = _("to force the rebase please set "
               "experimental.allowdivergence=True")
         raise error.Abort(msg % (",".join(divhashes),), hint=h)
 
 def defineparents(repo, rev, dest, state, destancestors,
                   obsoletenotrebased):
     'Return the new parent relationship of the revision that will be rebased'
     parents = repo[rev].parents()
     p1 = p2 = nullrev
     rp1 = None
 
     p1n = parents[0].rev()
     if p1n in destancestors:
         p1 = dest
     elif p1n in state:
         if state[p1n] == nullmerge:
             p1 = dest
         elif state[p1n] in revskipped:
             p1 = nearestrebased(repo, p1n, state)
             if p1 is None:
                 p1 = dest
         else:
             p1 = state[p1n]
     else: # p1n external
         p1 = dest
         p2 = p1n
 
     if len(parents) == 2 and parents[1].rev() not in destancestors:
         p2n = parents[1].rev()
         # interesting second parent
         if p2n in state:
             if p1 == dest: # p1n in destancestors or external
                 p1 = state[p2n]
                 if p1 == revprecursor:
                     rp1 = obsoletenotrebased[p2n]
             elif state[p2n] in revskipped:
                 p2 = nearestrebased(repo, p2n, state)
                 if p2 is None:
                     # no ancestors rebased yet, detach
                     p2 = dest
             else:
                 p2 = state[p2n]
         else: # p2n external
             if p2 != nullrev: # p1n external too => rev is a merged revision
                 raise error.Abort(_('cannot use revision %d as base, result '
                         'would have 3 parents') % rev)
             p2 = p2n
     repo.ui.debug(" future parents are %d and %d\n" %
                             (repo[rp1 or p1].rev(), repo[p2].rev()))
 
     if not any(p.rev() in state for p in parents):
         # Case (1) root changeset of a non-detaching rebase set.
         # Let the merge mechanism find the base itself.
         base = None
     elif not repo[rev].p2():
         # Case (2) detaching the node with a single parent, use this parent
         base = repo[rev].p1().rev()
     else:
         # Assuming there is a p1, this is the case where there also is a p2.
         # We are thus rebasing a merge and need to pick the right merge base.
         #
         # Imagine we have:
         # - M: current rebase revision in this step
         # - A: one parent of M
         # - B: other parent of M
         # - D: destination of this merge step (p1 var)
         #
         # Consider the case where D is a descendant of A or B and the other is
         # 'outside'. In this case, the right merge base is the D ancestor.
         #
         # An informal proof, assuming A is 'outside' and B is the D ancestor:
         #
         # If we pick B as the base, the merge involves:
         # - changes from B to M (actual changeset payload)
         # - changes from B to D (induced by rebase) as D is a rebased
         #   version of B)
         # Which exactly represent the rebase operation.
         #
         # If we pick A as the base, the merge involves:
         # - changes from A to M (actual changeset payload)
         # - changes from A to D (with include changes between unrelated A and B
         #   plus changes induced by rebase)
         # Which does not represent anything sensible and creates a lot of
         # conflicts. A is thus not the right choice - B is.
         #
         # Note: The base found in this 'proof' is only correct in the specified
         # case. This base does not make sense if is not D a descendant of A or B
         # or if the other is not parent 'outside' (especially not if the other
         # parent has been rebased). The current implementation does not
         # make it feasible to consider different cases separately. In these
         # other cases we currently just leave it to the user to correctly
         # resolve an impossible merge using a wrong ancestor.
         #
         # xx, p1 could be -4, and both parents could probably be -4...
         for p in repo[rev].parents():
             if state.get(p.rev()) == p1:
                 base = p.rev()
                 break
         else: # fallback when base not found
             base = None
 
             # Raise because this function is called wrong (see issue 4106)
             raise AssertionError('no base found to rebase on '
                                  '(defineparents called wrong)')
     return rp1 or p1, p2, base
 
 def isagitpatch(repo, patchname):
     'Return true if the given patch is in git format'
     mqpatch = os.path.join(repo.mq.path, patchname)
     for line in patch.linereader(file(mqpatch, 'rb')):
         if line.startswith('diff --git'):
             return True
     return False
 
 def updatemq(repo, state, skipped, **opts):
     'Update rebased mq patches - finalize and then import them'
     mqrebase = {}
     mq = repo.mq
     original_series = mq.fullseries[:]
     skippedpatches = set()
 
     for p in mq.applied:
         rev = repo[p.node].rev()
         if rev in state:
             repo.ui.debug('revision %d is an mq patch (%s), finalize it.\n' %
                                         (rev, p.name))
             mqrebase[rev] = (p.name, isagitpatch(repo, p.name))
         else:
             # Applied but not rebased, not sure this should happen
             skippedpatches.add(p.name)
 
     if mqrebase:
         mq.finish(repo, mqrebase.keys())
 
         # We must start import from the newest revision
         for rev in sorted(mqrebase, reverse=True):
             if rev not in skipped:
                 name, isgit = mqrebase[rev]
                 repo.ui.note(_('updating mq patch %s to %s:%s\n') %
                              (name, state[rev], repo[state[rev]]))
                 mq.qimport(repo, (), patchname=name, git=isgit,
                                 rev=[str(state[rev])])
             else:
                 # Rebased and skipped
                 skippedpatches.add(mqrebase[rev][0])
 
         # Patches were either applied and rebased and imported in
         # order, applied and removed or unapplied. Discard the removed
         # ones while preserving the original series order and guards.
         newseries = [s for s in original_series
                      if mq.guard_re.split(s, 1)[0] not in skippedpatches]
         mq.fullseries[:] = newseries
         mq.seriesdirty = True
         mq.savedirty()
 
 def storecollapsemsg(repo, collapsemsg):
     'Store the collapse message to allow recovery'
     collapsemsg = collapsemsg or ''
     f = repo.vfs("last-message.txt", "w")
     f.write("%s\n" % collapsemsg)
     f.close()
 
 def clearcollapsemsg(repo):
     'Remove collapse message file'
     repo.vfs.unlinkpath("last-message.txt", ignoremissing=True)
 
 def restorecollapsemsg(repo, isabort):
     'Restore previously stored collapse message'
     try:
         f = repo.vfs("last-message.txt")
         collapsemsg = f.readline().strip()
         f.close()
     except IOError as err:
         if err.errno != errno.ENOENT:
             raise
         if isabort:
             # Oh well, just abort like normal
             collapsemsg = ''
         else:
             raise error.Abort(_('missing .hg/last-message.txt for rebase'))
     return collapsemsg
 
 def clearstatus(repo):
     'Remove the status files'
     _clearrebasesetvisibiliy(repo)
     # Make sure the active transaction won't write the state file
     tr = repo.currenttransaction()
     if tr:
         tr.removefilegenerator('rebasestate')
     repo.vfs.unlinkpath("rebasestate", ignoremissing=True)
 
 def needupdate(repo, state):
     '''check whether we should `update --clean` away from a merge, or if
     somehow the working dir got forcibly updated, e.g. by older hg'''
     parents = [p.rev() for p in repo[None].parents()]
 
     # Are we in a merge state at all?
     if len(parents) < 2:
         return False
 
     # We should be standing on the first as-of-yet unrebased commit.
     firstunrebased = min([old for old, new in state.iteritems()
                           if new == nullrev])
     if firstunrebased in parents:
         return True
 
     return False
 
 def abort(repo, originalwd, dest, state, activebookmark=None):
     '''Restore the repository to its original state.  Additional args:
 
     activebookmark: the name of the bookmark that should be active after the
         restore'''
 
     try:
         # If the first commits in the rebased set get skipped during the rebase,
         # their values within the state mapping will be the dest rev id. The
         # dstates list must must not contain the dest rev (issue4896)
         dstates = [s for s in state.values() if s >= 0 and s != dest]
         immutable = [d for d in dstates if not repo[d].mutable()]
         cleanup = True
         if immutable:
             repo.ui.warn(_("warning: can't clean up public changesets %s\n")
                         % ', '.join(str(repo[r]) for r in immutable),
                         hint=_("see 'hg help phases' for details"))
             cleanup = False
 
         descendants = set()
         if dstates:
             descendants = set(repo.changelog.descendants(dstates))
         if descendants - set(dstates):
             repo.ui.warn(_("warning: new changesets detected on destination "
                            "branch, can't strip\n"))
             cleanup = False
 
         if cleanup:
             shouldupdate = False
             rebased = filter(lambda x: x >= 0 and x != dest, state.values())
             if rebased:
                 strippoints = [
                         c.node() for c in repo.set('roots(%ld)', rebased)]
 
             updateifonnodes = set(rebased)
             updateifonnodes.add(dest)
             updateifonnodes.add(originalwd)
             shouldupdate = repo['.'].rev() in updateifonnodes
 
             # Update away from the rebase if necessary
             if shouldupdate or needupdate(repo, state):
                 mergemod.update(repo, originalwd, False, True)
 
             # Strip from the first rebased revision
             if rebased:
                 # no backup of rebased cset versions needed
                 repair.strip(repo.ui, repo, strippoints)
 
         if activebookmark and activebookmark in repo._bookmarks:
             bookmarks.activate(repo, activebookmark)
 
     finally:
         clearstatus(repo)
         clearcollapsemsg(repo)
         repo.ui.warn(_('rebase aborted\n'))
     return 0
 
 def buildstate(repo, dest, rebaseset, collapse, obsoletenotrebased):
     '''Define which revisions are going to be rebased and where
 
     repo: repo
     dest: context
     rebaseset: set of rev
     '''
     originalwd = repo['.'].rev()
     _setrebasesetvisibility(repo, set(rebaseset) | {originalwd})
 
     # This check isn't strictly necessary, since mq detects commits over an
     # applied patch. But it prevents messing up the working directory when
     # a partially completed rebase is blocked by mq.
     if 'qtip' in repo.tags() and (dest.node() in
                             [s.node for s in repo.mq.applied]):
         raise error.Abort(_('cannot rebase onto an applied mq patch'))
 
     roots = list(repo.set('roots(%ld)', rebaseset))
     if not roots:
         raise error.Abort(_('no matching revisions'))
     roots.sort()
     state = dict.fromkeys(rebaseset, revtodo)
     detachset = set()
     emptyrebase = True
     for root in roots:
         commonbase = root.ancestor(dest)
         if commonbase == root:
             raise error.Abort(_('source is ancestor of destination'))
         if commonbase == dest:
             wctx = repo[None]
             if dest == wctx.p1():
                 # when rebasing to '.', it will use the current wd branch name
                 samebranch = root.branch() == wctx.branch()
             else:
                 samebranch = root.branch() == dest.branch()
             if not collapse and samebranch and dest in root.parents():
                 # mark the revision as done by setting its new revision
                 # equal to its old (current) revisions
                 state[root.rev()] = root.rev()
                 repo.ui.debug('source is a child of destination\n')
                 continue
 
         emptyrebase = False
         repo.ui.debug('rebase onto %s starting from %s\n' % (dest, root))
         # Rebase tries to turn <dest> into a parent of <root> while
         # preserving the number of parents of rebased changesets:
         #
         # - A changeset with a single parent will always be rebased as a
         #   changeset with a single parent.
         #
         # - A merge will be rebased as merge unless its parents are both
         #   ancestors of <dest> or are themselves in the rebased set and
         #   pruned while rebased.
         #
         # If one parent of <root> is an ancestor of <dest>, the rebased
         # version of this parent will be <dest>. This is always true with
         # --base option.
         #
         # Otherwise, we need to *replace* the original parents with
         # <dest>. This "detaches" the rebased set from its former location
         # and rebases it onto <dest>. Changes introduced by ancestors of
         # <root> not common with <dest> (the detachset, marked as
         # nullmerge) are "removed" from the rebased changesets.
         #
         # - If <root> has a single parent, set it to <dest>.
         #
         # - If <root> is a merge, we cannot decide which parent to
         #   replace, the rebase operation is not clearly defined.
         #
         # The table below sums up this behavior:
         #
         # +------------------+----------------------+-------------------------+
         # |                  |     one parent       |  merge                  |
         # +------------------+----------------------+-------------------------+
         # | parent in        | new parent is <dest> | parents in ::<dest> are |
         # | ::<dest>         |                      | remapped to <dest>      |
         # +------------------+----------------------+-------------------------+
         # | unrelated source | new parent is <dest> | ambiguous, abort        |
         # +------------------+----------------------+-------------------------+
         #
         # The actual abort is handled by `defineparents`
         if len(root.parents()) <= 1:
             # ancestors of <root> not ancestors of <dest>
             detachset.update(repo.changelog.findmissingrevs([commonbase.rev()],
                                                             [root.rev()]))
     if emptyrebase:
         return None
     for rev in sorted(state):
         parents = [p for p in repo.changelog.parentrevs(rev) if p != nullrev]
         # if all parents of this revision are done, then so is this revision
         if parents and all((state.get(p) == p for p in parents)):
             state[rev] = rev
     for r in detachset:
         if r not in state:
             state[r] = nullmerge
     if len(roots) > 1:
         # If we have multiple roots, we may have "hole" in the rebase set.
         # Rebase roots that descend from those "hole" should not be detached as
         # other root are. We use the special `revignored` to inform rebase that
         # the revision should be ignored but that `defineparents` should search
         # a rebase destination that make sense regarding rebased topology.
         rebasedomain = set(repo.revs('%ld::%ld', rebaseset, rebaseset))
         for ignored in set(rebasedomain) - set(rebaseset):
             state[ignored] = revignored
     for r in obsoletenotrebased:
         if obsoletenotrebased[r] is None:
             state[r] = revpruned
         else:
             state[r] = revprecursor
     return originalwd, dest.rev(), state
 
 def clearrebased(ui, repo, dest, state, skipped, collapsedas=None):
     """dispose of rebased revision at the end of the rebase
 
     If `collapsedas` is not None, the rebase was a collapse whose result if the
     `collapsedas` node."""
     tonode = repo.changelog.node
     # Move bookmark of skipped nodes to destination. This cannot be handled
     # by scmutil.cleanupnodes since it will treat rev as removed (no successor)
     # and move bookmark backwards.
     bmchanges = [(name, tonode(max(adjustdest(repo, rev, dest, state))))
                  for rev in skipped
                  for name in repo.nodebookmarks(tonode(rev))]
     if bmchanges:
         with repo.transaction('rebase') as tr:
             repo._bookmarks.applychanges(repo, tr, bmchanges)
     mapping = {}
     for rev, newrev in sorted(state.items()):
         if newrev >= 0 and newrev != rev:
             if rev in skipped:
                 succs = ()
             elif collapsedas is not None:
                 succs = (collapsedas,)
             else:
                 succs = (tonode(newrev),)
             mapping[tonode(rev)] = succs
     scmutil.cleanupnodes(repo, mapping, 'rebase')
 
 def pullrebase(orig, ui, repo, *args, **opts):
     'Call rebase after pull if the latter has been invoked with --rebase'
     ret = None
     if opts.get('rebase'):
         if ui.configbool('commands', 'rebase.requiredest'):
             msg = _('rebase destination required by configuration')
             hint = _('use hg pull followed by hg rebase -d DEST')
             raise error.Abort(msg, hint=hint)
 
         with repo.wlock(), repo.lock():
             if opts.get('update'):
                 del opts['update']
                 ui.debug('--update and --rebase are not compatible, ignoring '
                          'the update flag\n')
 
             cmdutil.checkunfinished(repo)
             cmdutil.bailifchanged(repo, hint=_('cannot pull with rebase: '
                 'please commit or shelve your changes first'))
 
             revsprepull = len(repo)
             origpostincoming = commands.postincoming
             def _dummy(*args, **kwargs):
                 pass
             commands.postincoming = _dummy
             try:
                 ret = orig(ui, repo, *args, **opts)
             finally:
                 commands.postincoming = origpostincoming
             revspostpull = len(repo)
             if revspostpull > revsprepull:
                 # --rev option from pull conflict with rebase own --rev
                 # dropping it
                 if 'rev' in opts:
                     del opts['rev']
                 # positional argument from pull conflicts with rebase's own
                 # --source.
                 if 'source' in opts:
                     del opts['source']
                 # revsprepull is the len of the repo, not revnum of tip.
                 destspace = list(repo.changelog.revs(start=revsprepull))
                 opts['_destspace'] = destspace
                 try:
                     rebase(ui, repo, **opts)
                 except error.NoMergeDestAbort:
                     # we can maybe update instead
                     rev, _a, _b = destutil.destupdate(repo)
                     if rev == repo['.'].rev():
                         ui.status(_('nothing to rebase\n'))
                     else:
                         ui.status(_('nothing to rebase - updating instead\n'))
                         # not passing argument to get the bare update behavior
                         # with warning and trumpets
                         commands.update(ui, repo)
     else:
         if opts.get('tool'):
             raise error.Abort(_('--tool can only be used with --rebase'))
         ret = orig(ui, repo, *args, **opts)
 
     return ret
 
 def _setrebasesetvisibility(repo, revs):
     """store the currently rebased set on the repo object
 
     This is used by another function to prevent rebased revision to because
     hidden (see issue4504)"""
     repo = repo.unfiltered()
     repo._rebaseset = revs
     # invalidate cache if visibility changes
     hiddens = repo.filteredrevcache.get('visible', set())
     if revs & hiddens:
         repo.invalidatevolatilesets()
 
 def _clearrebasesetvisibiliy(repo):
     """remove rebaseset data from the repo"""
     repo = repo.unfiltered()
     if '_rebaseset' in vars(repo):
         del repo._rebaseset
 
 def _rebasedvisible(orig, repo):
     """ensure rebased revs stay visible (see issue4504)"""
     blockers = orig(repo)
     blockers.update(getattr(repo, '_rebaseset', ()))
     return blockers
 
 def _filterobsoleterevs(repo, revs):
     """returns a set of the obsolete revisions in revs"""
     return set(r for r in revs if repo[r].obsolete())
 
 def _computeobsoletenotrebased(repo, rebaseobsrevs, dest):
     """return a mapping obsolete => successor for all obsolete nodes to be
     rebased that have a successors in the destination
 
     obsolete => None entries in the mapping indicate nodes with no successor"""
     obsoletenotrebased = {}
 
     # Build a mapping successor => obsolete nodes for the obsolete
     # nodes to be rebased
     allsuccessors = {}
     cl = repo.changelog
     for r in rebaseobsrevs:
         node = cl.node(r)
         for s in obsutil.allsuccessors(repo.obsstore, [node]):
             try:
                 allsuccessors[cl.rev(s)] = cl.rev(node)
             except LookupError:
                 pass
 
     if allsuccessors:
         # Look for successors of obsolete nodes to be rebased among
         # the ancestors of dest
         ancs = cl.ancestors([dest],
                             stoprev=min(allsuccessors),
                             inclusive=True)
         for s in allsuccessors:
             if s in ancs:
                 obsoletenotrebased[allsuccessors[s]] = s
             elif (s == allsuccessors[s] and
                   allsuccessors.values().count(s) == 1):
                 # plain prune
                 obsoletenotrebased[s] = None
 
     return obsoletenotrebased
 
 def summaryhook(ui, repo):
     if not repo.vfs.exists('rebasestate'):
         return
     try:
         rbsrt = rebaseruntime(repo, ui, {})
         rbsrt.restorestatus()
         state = rbsrt.state
     except error.RepoLookupError:
         # i18n: column positioning for "hg summary"
         msg = _('rebase: (use "hg rebase --abort" to clear broken state)\n')
         ui.write(msg)
         return
     numrebased = len([i for i in state.itervalues() if i >= 0])
     # i18n: column positioning for "hg summary"
     ui.write(_('rebase: %s, %s (rebase --continue)\n') %
              (ui.label(_('%d rebased'), 'rebase.rebased') % numrebased,
               ui.label(_('%d remaining'), 'rebase.remaining') %
               (len(state) - numrebased)))
 
 def uisetup(ui):
     #Replace pull with a decorator to provide --rebase option
     entry = extensions.wrapcommand(commands.table, 'pull', pullrebase)
     entry[1].append(('', 'rebase', None,
                      _("rebase working directory to branch head")))
     entry[1].append(('t', 'tool', '',
                      _("specify merge tool for rebase")))
     cmdutil.summaryhooks.add('rebase', summaryhook)
     cmdutil.unfinishedstates.append(
         ['rebasestate', False, False, _('rebase in progress'),
          _("use 'hg rebase --continue' or 'hg rebase --abort'")])
     cmdutil.afterresolvedstates.append(
         ['rebasestate', _('hg rebase --continue')])
     # ensure rebased rev are not hidden
     extensions.wrapfunction(repoview, 'pinnedrevs', _rebasedvisible)

mercurial/dirstateguard.py

@@ -1,68 +1,78 b''
 # dirstateguard.py - class to allow restoring dirstate after failure
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 from .i18n import _
 
 from . import (
     error,
 )
 
 class dirstateguard(object):
     '''Restore dirstate at unexpected failure.
 
     At the construction, this class does:
 
     - write current ``repo.dirstate`` out, and
     - save ``.hg/dirstate`` into the backup file
 
     This restores ``.hg/dirstate`` from backup file, if ``release()``
     is invoked before ``close()``.
 
     This just removes the backup file at ``close()`` before ``release()``.
     '''
 
     def __init__(self, repo, name):
         self._repo = repo
         self._active = False
         self._closed = False
         self._backupname = 'dirstate.backup.%s.%d' % (name, id(self))
         repo.dirstate.savebackup(repo.currenttransaction(), self._backupname)
         self._active = True
 
     def __del__(self):
         if self._active: # still active
             # this may occur, even if this class is used correctly:
             # for example, releasing other resources like transaction
             # may raise exception before ``dirstateguard.release`` in
             # ``release(tr, ....)``.
             self._abort()
 
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        try:
+            if exc_type is None:
+                self.close()
+        finally:
+            self.release()
+
     def close(self):
         if not self._active: # already inactivated
             msg = (_("can't close already inactivated backup: %s")
                    % self._backupname)
             raise error.Abort(msg)
 
         self._repo.dirstate.clearbackup(self._repo.currenttransaction(),
                                          self._backupname)
         self._active = False
         self._closed = True
 
     def _abort(self):
         self._repo.dirstate.restorebackup(self._repo.currenttransaction(),
                                            self._backupname)
         self._active = False
 
     def release(self):
         if not self._closed:
             if not self._active: # already inactivated
                 msg = (_("can't release already inactivated backup: %s")
                        % self._backupname)
                 raise error.Abort(msg)
             self._abort()

mercurial/util.py

@@ -1,3696 +1,3700 b''
 # util.py - Mercurial utility functions and platform specific implementations
 #
 #  Copyright 2005 K. Thananchayan <[e-mail]>
 #  Copyright 2005-2007 Matt Mackall <[e-mail]>
 #  Copyright 2006 Vadim Gelfer <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 """Mercurial utility functions and platform specific implementations.
 
 This contains helper routines that are independent of the SCM core and
 hide platform-specific details from the core.
 """
 
 from __future__ import absolute_import
 
 import bz2
 import calendar
 import codecs
 import collections
 import contextlib
 import datetime
 import errno
 import gc
 import hashlib
 import imp
 import os
 import platform as pyplatform
 import re as remod
 import shutil
 import signal
 import socket
 import stat
 import string
 import subprocess
 import sys
 import tempfile
 import textwrap
 import time
 import traceback
 import warnings
 import zlib
 
 from . import (
     encoding,
     error,
     i18n,
     policy,
     pycompat,
 )
 
 base85 = policy.importmod(r'base85')
 osutil = policy.importmod(r'osutil')
 parsers = policy.importmod(r'parsers')
 
 b85decode = base85.b85decode
 b85encode = base85.b85encode
 
 cookielib = pycompat.cookielib
 empty = pycompat.empty
 httplib = pycompat.httplib
 httpserver = pycompat.httpserver
 pickle = pycompat.pickle
 queue = pycompat.queue
 socketserver = pycompat.socketserver
 stderr = pycompat.stderr
 stdin = pycompat.stdin
 stdout = pycompat.stdout
 stringio = pycompat.stringio
 urlerr = pycompat.urlerr
 urlreq = pycompat.urlreq
 xmlrpclib = pycompat.xmlrpclib
 
 # workaround for win32mbcs
 _filenamebytestr = pycompat.bytestr
 
 def isatty(fp):
     try:
         return fp.isatty()
     except AttributeError:
         return False
 
 # glibc determines buffering on first write to stdout - if we replace a TTY
 # destined stdout with a pipe destined stdout (e.g. pager), we want line
 # buffering
 if isatty(stdout):
     stdout = os.fdopen(stdout.fileno(), pycompat.sysstr('wb'), 1)
 
 if pycompat.osname == 'nt':
     from . import windows as platform
     stdout = platform.winstdout(stdout)
 else:
     from . import posix as platform
 
 _ = i18n._
 
 bindunixsocket = platform.bindunixsocket
 cachestat = platform.cachestat
 checkexec = platform.checkexec
 checklink = platform.checklink
 copymode = platform.copymode
 executablepath = platform.executablepath
 expandglobs = platform.expandglobs
 explainexit = platform.explainexit
 findexe = platform.findexe
 gethgcmd = platform.gethgcmd
 getuser = platform.getuser
 getpid = os.getpid
 groupmembers = platform.groupmembers
 groupname = platform.groupname
 hidewindow = platform.hidewindow
 isexec = platform.isexec
 isowner = platform.isowner
 listdir = osutil.listdir
 localpath = platform.localpath
 lookupreg = platform.lookupreg
 makedir = platform.makedir
 nlinks = platform.nlinks
 normpath = platform.normpath
 normcase = platform.normcase
 normcasespec = platform.normcasespec
 normcasefallback = platform.normcasefallback
 openhardlinks = platform.openhardlinks
 oslink = platform.oslink
 parsepatchoutput = platform.parsepatchoutput
 pconvert = platform.pconvert
 poll = platform.poll
 popen = platform.popen
 posixfile = platform.posixfile
 quotecommand = platform.quotecommand
 readpipe = platform.readpipe
 rename = platform.rename
 removedirs = platform.removedirs
 samedevice = platform.samedevice
 samefile = platform.samefile
 samestat = platform.samestat
 setbinary = platform.setbinary
 setflags = platform.setflags
 setsignalhandler = platform.setsignalhandler
 shellquote = platform.shellquote
 spawndetached = platform.spawndetached
 split = platform.split
 sshargs = platform.sshargs
 statfiles = getattr(osutil, 'statfiles', platform.statfiles)
 statisexec = platform.statisexec
 statislink = platform.statislink
 testpid = platform.testpid
 umask = platform.umask
 unlink = platform.unlink
 username = platform.username
 
 try:
     recvfds = osutil.recvfds
 except AttributeError:
     pass
 try:
     setprocname = osutil.setprocname
 except AttributeError:
     pass
 
 # Python compatibility
 
 _notset = object()
 
 # disable Python's problematic floating point timestamps (issue4836)
 # (Python hypocritically says you shouldn't change this behavior in
 # libraries, and sure enough Mercurial is not a library.)
 os.stat_float_times(False)
 
 def safehasattr(thing, attr):
     return getattr(thing, attr, _notset) is not _notset
 
 def bitsfrom(container):
     bits = 0
     for bit in container:
         bits |= bit
     return bits
 
 # python 2.6 still have deprecation warning enabled by default. We do not want
 # to display anything to standard user so detect if we are running test and
 # only use python deprecation warning in this case.
 _dowarn = bool(encoding.environ.get('HGEMITWARNINGS'))
 if _dowarn:
     # explicitly unfilter our warning for python 2.7
     #
     # The option of setting PYTHONWARNINGS in the test runner was investigated.
     # However, module name set through PYTHONWARNINGS was exactly matched, so
     # we cannot set 'mercurial' and have it match eg: 'mercurial.scmutil'. This
     # makes the whole PYTHONWARNINGS thing useless for our usecase.
     warnings.filterwarnings(r'default', r'', DeprecationWarning, r'mercurial')
     warnings.filterwarnings(r'default', r'', DeprecationWarning, r'hgext')
     warnings.filterwarnings(r'default', r'', DeprecationWarning, r'hgext3rd')
 
 def nouideprecwarn(msg, version, stacklevel=1):
     """Issue an python native deprecation warning
 
     This is a noop outside of tests, use 'ui.deprecwarn' when possible.
     """
     if _dowarn:
         msg += ("\n(compatibility will be dropped after Mercurial-%s,"
                 " update your code.)") % version
         warnings.warn(msg, DeprecationWarning, stacklevel + 1)
 
 DIGESTS = {
     'md5': hashlib.md5,
     'sha1': hashlib.sha1,
     'sha512': hashlib.sha512,
 }
 # List of digest types from strongest to weakest
 DIGESTS_BY_STRENGTH = ['sha512', 'sha1', 'md5']
 
 for k in DIGESTS_BY_STRENGTH:
     assert k in DIGESTS
 
 class digester(object):
     """helper to compute digests.
 
     This helper can be used to compute one or more digests given their name.
 
     >>> d = digester(['md5', 'sha1'])
     >>> d.update('foo')
     >>> [k for k in sorted(d)]
     ['md5', 'sha1']
     >>> d['md5']
     'acbd18db4cc2f85cedef654fccc4a4d8'
     >>> d['sha1']
     '0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33'
     >>> digester.preferred(['md5', 'sha1'])
     'sha1'
     """
 
     def __init__(self, digests, s=''):
         self._hashes = {}
         for k in digests:
             if k not in DIGESTS:
                 raise Abort(_('unknown digest type: %s') % k)
             self._hashes[k] = DIGESTS[k]()
         if s:
             self.update(s)
 
     def update(self, data):
         for h in self._hashes.values():
             h.update(data)
 
     def __getitem__(self, key):
         if key not in DIGESTS:
             raise Abort(_('unknown digest type: %s') % k)
         return self._hashes[key].hexdigest()
 
     def __iter__(self):
         return iter(self._hashes)
 
     @staticmethod
     def preferred(supported):
         """returns the strongest digest type in both supported and DIGESTS."""
 
         for k in DIGESTS_BY_STRENGTH:
             if k in supported:
                 return k
         return None
 
 class digestchecker(object):
     """file handle wrapper that additionally checks content against a given
     size and digests.
 
         d = digestchecker(fh, size, {'md5': '...'})
 
     When multiple digests are given, all of them are validated.
     """
 
     def __init__(self, fh, size, digests):
         self._fh = fh
         self._size = size
         self._got = 0
         self._digests = dict(digests)
         self._digester = digester(self._digests.keys())
 
     def read(self, length=-1):
         content = self._fh.read(length)
         self._digester.update(content)
         self._got += len(content)
         return content
 
     def validate(self):
         if self._size != self._got:
             raise Abort(_('size mismatch: expected %d, got %d') %
                 (self._size, self._got))
         for k, v in self._digests.items():
             if v != self._digester[k]:
                 # i18n: first parameter is a digest name
                 raise Abort(_('%s mismatch: expected %s, got %s') %
                     (k, v, self._digester[k]))
 
 try:
     buffer = buffer
 except NameError:
     def buffer(sliceable, offset=0, length=None):
         if length is not None:
             return memoryview(sliceable)[offset:offset + length]
         return memoryview(sliceable)[offset:]
 
 closefds = pycompat.osname == 'posix'
 
 _chunksize = 4096
 
 class bufferedinputpipe(object):
     """a manually buffered input pipe
 
     Python will not let us use buffered IO and lazy reading with 'polling' at
     the same time. We cannot probe the buffer state and select will not detect
     that data are ready to read if they are already buffered.
 
     This class let us work around that by implementing its own buffering
     (allowing efficient readline) while offering a way to know if the buffer is
     empty from the output (allowing collaboration of the buffer with polling).
 
     This class lives in the 'util' module because it makes use of the 'os'
     module from the python stdlib.
     """
 
     def __init__(self, input):
         self._input = input
         self._buffer = []
         self._eof = False
         self._lenbuf = 0
 
     @property
     def hasbuffer(self):
         """True is any data is currently buffered
 
         This will be used externally a pre-step for polling IO. If there is
         already data then no polling should be set in place."""
         return bool(self._buffer)
 
     @property
     def closed(self):
         return self._input.closed
 
     def fileno(self):
         return self._input.fileno()
 
     def close(self):
         return self._input.close()
 
     def read(self, size):
         while (not self._eof) and (self._lenbuf < size):
             self._fillbuffer()
         return self._frombuffer(size)
 
     def readline(self, *args, **kwargs):
         if 1 < len(self._buffer):
             # this should not happen because both read and readline end with a
             # _frombuffer call that collapse it.
             self._buffer = [''.join(self._buffer)]
             self._lenbuf = len(self._buffer[0])
         lfi = -1
         if self._buffer:
             lfi = self._buffer[-1].find('\n')
         while (not self._eof) and lfi < 0:
             self._fillbuffer()
             if self._buffer:
                 lfi = self._buffer[-1].find('\n')
         size = lfi + 1
         if lfi < 0: # end of file
             size = self._lenbuf
         elif 1 < len(self._buffer):
             # we need to take previous chunks into account
             size += self._lenbuf - len(self._buffer[-1])
         return self._frombuffer(size)
 
     def _frombuffer(self, size):
         """return at most 'size' data from the buffer
 
         The data are removed from the buffer."""
         if size == 0 or not self._buffer:
             return ''
         buf = self._buffer[0]
         if 1 < len(self._buffer):
             buf = ''.join(self._buffer)
 
         data = buf[:size]
         buf = buf[len(data):]
         if buf:
             self._buffer = [buf]
             self._lenbuf = len(buf)
         else:
             self._buffer = []
             self._lenbuf = 0
         return data
 
     def _fillbuffer(self):
         """read data to the buffer"""
         data = os.read(self._input.fileno(), _chunksize)
         if not data:
             self._eof = True
         else:
             self._lenbuf += len(data)
             self._buffer.append(data)
 
 def popen2(cmd, env=None, newlines=False):
     # Setting bufsize to -1 lets the system decide the buffer size.
     # The default for bufsize is 0, meaning unbuffered. This leads to
     # poor performance on Mac OS X: http://bugs.python.org/issue4194
     p = subprocess.Popen(cmd, shell=True, bufsize=-1,
                          close_fds=closefds,
                          stdin=subprocess.PIPE, stdout=subprocess.PIPE,
                          universal_newlines=newlines,
                          env=env)
     return p.stdin, p.stdout
 
 def popen3(cmd, env=None, newlines=False):
     stdin, stdout, stderr, p = popen4(cmd, env, newlines)
     return stdin, stdout, stderr
 
 def popen4(cmd, env=None, newlines=False, bufsize=-1):
     p = subprocess.Popen(cmd, shell=True, bufsize=bufsize,
                          close_fds=closefds,
                          stdin=subprocess.PIPE, stdout=subprocess.PIPE,
                          stderr=subprocess.PIPE,
                          universal_newlines=newlines,
                          env=env)
     return p.stdin, p.stdout, p.stderr, p
 
 def version():
     """Return version information if available."""
     try:
         from . import __version__
         return __version__.version
     except ImportError:
         return 'unknown'
 
 def versiontuple(v=None, n=4):
     """Parses a Mercurial version string into an N-tuple.
 
     The version string to be parsed is specified with the ``v`` argument.
     If it isn't defined, the current Mercurial version string will be parsed.
 
     ``n`` can be 2, 3, or 4. Here is how some version strings map to
     returned values:
 
     >>> v = '3.6.1+190-df9b73d2d444'
     >>> versiontuple(v, 2)
     (3, 6)
     >>> versiontuple(v, 3)
     (3, 6, 1)
     >>> versiontuple(v, 4)
     (3, 6, 1, '190-df9b73d2d444')
 
     >>> versiontuple('3.6.1+190-df9b73d2d444+20151118')
     (3, 6, 1, '190-df9b73d2d444+20151118')
 
     >>> v = '3.6'
     >>> versiontuple(v, 2)
     (3, 6)
     >>> versiontuple(v, 3)
     (3, 6, None)
     >>> versiontuple(v, 4)
     (3, 6, None, None)
 
     >>> v = '3.9-rc'
     >>> versiontuple(v, 2)
     (3, 9)
     >>> versiontuple(v, 3)
     (3, 9, None)
     >>> versiontuple(v, 4)
     (3, 9, None, 'rc')
 
     >>> v = '3.9-rc+2-02a8fea4289b'
     >>> versiontuple(v, 2)
     (3, 9)
     >>> versiontuple(v, 3)
     (3, 9, None)
     >>> versiontuple(v, 4)
     (3, 9, None, 'rc+2-02a8fea4289b')
     """
     if not v:
         v = version()
     parts = remod.split('[\+-]', v, 1)
     if len(parts) == 1:
         vparts, extra = parts[0], None
     else:
         vparts, extra = parts
 
     vints = []
     for i in vparts.split('.'):
         try:
             vints.append(int(i))
         except ValueError:
             break
     # (3, 6) -> (3, 6, None)
     while len(vints) < 3:
         vints.append(None)
 
     if n == 2:
         return (vints[0], vints[1])
     if n == 3:
         return (vints[0], vints[1], vints[2])
     if n == 4:
         return (vints[0], vints[1], vints[2], extra)
 
 # used by parsedate
 defaultdateformats = (
     '%Y-%m-%dT%H:%M:%S', # the 'real' ISO8601
     '%Y-%m-%dT%H:%M',    #   without seconds
     '%Y-%m-%dT%H%M%S',   # another awful but legal variant without :
     '%Y-%m-%dT%H%M',     #   without seconds
     '%Y-%m-%d %H:%M:%S', # our common legal variant
     '%Y-%m-%d %H:%M',    #   without seconds
     '%Y-%m-%d %H%M%S',   # without :
     '%Y-%m-%d %H%M',     #   without seconds
     '%Y-%m-%d %I:%M:%S%p',
     '%Y-%m-%d %H:%M',
     '%Y-%m-%d %I:%M%p',
     '%Y-%m-%d',
     '%m-%d',
     '%m/%d',
     '%m/%d/%y',
     '%m/%d/%Y',
     '%a %b %d %H:%M:%S %Y',
     '%a %b %d %I:%M:%S%p %Y',
     '%a, %d %b %Y %H:%M:%S',        #  GNU coreutils "/bin/date --rfc-2822"
     '%b %d %H:%M:%S %Y',
     '%b %d %I:%M:%S%p %Y',
     '%b %d %H:%M:%S',
     '%b %d %I:%M:%S%p',
     '%b %d %H:%M',
     '%b %d %I:%M%p',
     '%b %d %Y',
     '%b %d',
     '%H:%M:%S',
     '%I:%M:%S%p',
     '%H:%M',
     '%I:%M%p',
 )
 
 extendeddateformats = defaultdateformats + (
     "%Y",
     "%Y-%m",
     "%b",
     "%b %Y",
     )
 
 def cachefunc(func):
     '''cache the result of function calls'''
     # XXX doesn't handle keywords args
     if func.__code__.co_argcount == 0:
         cache = []
         def f():
             if len(cache) == 0:
                 cache.append(func())
             return cache[0]
         return f
     cache = {}
     if func.__code__.co_argcount == 1:
         # we gain a small amount of time because
         # we don't need to pack/unpack the list
         def f(arg):
             if arg not in cache:
                 cache[arg] = func(arg)
             return cache[arg]
     else:
         def f(*args):
             if args not in cache:
                 cache[args] = func(*args)
             return cache[args]
 
     return f
 
 class sortdict(collections.OrderedDict):
     '''a simple sorted dictionary
 
     >>> d1 = sortdict([('a', 0), ('b', 1)])
     >>> d2 = d1.copy()
     >>> d2
     sortdict([('a', 0), ('b', 1)])
     >>> d2.update([('a', 2)])
     >>> d2.keys() # should still be in last-set order
     ['b', 'a']
     '''
 
     def __setitem__(self, key, value):
         if key in self:
             del self[key]
         super(sortdict, self).__setitem__(key, value)
 
 @contextlib.contextmanager
 def acceptintervention(tr=None):
     """A context manager that closes the transaction on InterventionRequired
 
     If no transaction was provided, this simply runs the body and returns
     """
     if not tr:
         yield
         return
     try:
         yield
         tr.close()
     except error.InterventionRequired:
         tr.close()
         raise
     finally:
         tr.release()
 
[e-mail]
+def nullcontextmanager():
+    yield
+
 class _lrucachenode(object):
     """A node in a doubly linked list.
 
     Holds a reference to nodes on either side as well as a key-value
     pair for the dictionary entry.
     """
     __slots__ = (u'next', u'prev', u'key', u'value')
 
     def __init__(self):
         self.next = None
         self.prev = None
 
         self.key = _notset
         self.value = None
 
     def markempty(self):
         """Mark the node as emptied."""
         self.key = _notset
 
 class lrucachedict(object):
     """Dict that caches most recent accesses and sets.
 
     The dict consists of an actual backing dict - indexed by original
     key - and a doubly linked circular list defining the order of entries in
     the cache.
 
     The head node is the newest entry in the cache. If the cache is full,
     we recycle head.prev and make it the new head. Cache accesses result in
     the node being moved to before the existing head and being marked as the
     new head node.
     """
     def __init__(self, max):
         self._cache = {}
 
         self._head = head = _lrucachenode()
         head.prev = head
         head.next = head
         self._size = 1
         self._capacity = max
 
     def __len__(self):
         return len(self._cache)
 
     def __contains__(self, k):
         return k in self._cache
 
     def __iter__(self):
         # We don't have to iterate in cache order, but why not.
         n = self._head
         for i in range(len(self._cache)):
             yield n.key
             n = n.next
 
     def __getitem__(self, k):
         node = self._cache[k]
         self._movetohead(node)
         return node.value
 
     def __setitem__(self, k, v):
         node = self._cache.get(k)
         # Replace existing value and mark as newest.
         if node is not None:
             node.value = v
             self._movetohead(node)
             return
 
         if self._size < self._capacity:
             node = self._addcapacity()
         else:
             # Grab the last/oldest item.
             node = self._head.prev
 
         # At capacity. Kill the old entry.
         if node.key is not _notset:
             del self._cache[node.key]
 
         node.key = k
         node.value = v
         self._cache[k] = node
         # And mark it as newest entry. No need to adjust order since it
         # is already self._head.prev.
         self._head = node
 
     def __delitem__(self, k):
         node = self._cache.pop(k)
         node.markempty()
 
         # Temporarily mark as newest item before re-adjusting head to make
         # this node the oldest item.
         self._movetohead(node)
         self._head = node.next
 
     # Additional dict methods.
 
     def get(self, k, default=None):
         try:
             return self._cache[k].value
         except KeyError:
             return default
 
     def clear(self):
         n = self._head
         while n.key is not _notset:
             n.markempty()
             n = n.next
 
         self._cache.clear()
 
     def copy(self):
         result = lrucachedict(self._capacity)
         n = self._head.prev
         # Iterate in oldest-to-newest order, so the copy has the right ordering
         for i in range(len(self._cache)):
             result[n.key] = n.value
             n = n.prev
         return result
 
     def _movetohead(self, node):
         """Mark a node as the newest, making it the new head.
 
         When a node is accessed, it becomes the freshest entry in the LRU
         list, which is denoted by self._head.
 
         Visually, let's make ``N`` the new head node (* denotes head):
 
             previous/oldest <-> head <-> next/next newest
 
             ----<->--- A* ---<->-----
             |                       |
             E <-> D <-> N <-> C <-> B
 
         To:
 
             ----<->--- N* ---<->-----
             |                       |
             E <-> D <-> C <-> B <-> A
 
         This requires the following moves:
 
            C.next = D  (node.prev.next = node.next)
            D.prev = C  (node.next.prev = node.prev)
            E.next = N  (head.prev.next = node)
            N.prev = E  (node.prev = head.prev)
            N.next = A  (node.next = head)
            A.prev = N  (head.prev = node)
         """
         head = self._head
         # C.next = D
         node.prev.next = node.next
         # D.prev = C
         node.next.prev = node.prev
         # N.prev = E
         node.prev = head.prev
         # N.next = A
         # It is tempting to do just "head" here, however if node is
         # adjacent to head, this will do bad things.
         node.next = head.prev.next
         # E.next = N
         node.next.prev = node
         # A.prev = N
         node.prev.next = node
 
         self._head = node
 
     def _addcapacity(self):
         """Add a node to the circular linked list.
 
         The new node is inserted before the head node.
         """
         head = self._head
         node = _lrucachenode()
         head.prev.next = node
         node.prev = head.prev
         node.next = head
         head.prev = node
         self._size += 1
         return node
 
 def lrucachefunc(func):
     '''cache most recent results of function calls'''
     cache = {}
     order = collections.deque()
     if func.__code__.co_argcount == 1:
         def f(arg):
             if arg not in cache:
                 if len(cache) > 20:
                     del cache[order.popleft()]
                 cache[arg] = func(arg)
             else:
                 order.remove(arg)
             order.append(arg)
             return cache[arg]
     else:
         def f(*args):
             if args not in cache:
                 if len(cache) > 20:
                     del cache[order.popleft()]
                 cache[args] = func(*args)
             else:
                 order.remove(args)
             order.append(args)
             return cache[args]
 
     return f
 
 class propertycache(object):
     def __init__(self, func):
         self.func = func
         self.name = func.__name__
     def __get__(self, obj, type=None):
         result = self.func(obj)
         self.cachevalue(obj, result)
         return result
 
     def cachevalue(self, obj, value):
         # __dict__ assignment required to bypass __setattr__ (eg: repoview)
         obj.__dict__[self.name] = value
 
 def pipefilter(s, cmd):
     '''filter string S through command CMD, returning its output'''
     p = subprocess.Popen(cmd, shell=True, close_fds=closefds,
                          stdin=subprocess.PIPE, stdout=subprocess.PIPE)
     pout, perr = p.communicate(s)
     return pout
 
 def tempfilter(s, cmd):
     '''filter string S through a pair of temporary files with CMD.
     CMD is used as a template to create the real command to be run,
     with the strings INFILE and OUTFILE replaced by the real names of
     the temporary files generated.'''
     inname, outname = None, None
     try:
         infd, inname = tempfile.mkstemp(prefix='hg-filter-in-')
         fp = os.fdopen(infd, pycompat.sysstr('wb'))
         fp.write(s)
         fp.close()
         outfd, outname = tempfile.mkstemp(prefix='hg-filter-out-')
         os.close(outfd)
         cmd = cmd.replace('INFILE', inname)
         cmd = cmd.replace('OUTFILE', outname)
         code = os.system(cmd)
         if pycompat.sysplatform == 'OpenVMS' and code & 1:
             code = 0
         if code:
             raise Abort(_("command '%s' failed: %s") %
                         (cmd, explainexit(code)))
         return readfile(outname)
     finally:
         try:
             if inname:
                 os.unlink(inname)
         except OSError:
             pass
         try:
             if outname:
                 os.unlink(outname)
         except OSError:
             pass
 
 filtertable = {
     'tempfile:': tempfilter,
     'pipe:': pipefilter,
     }
 
 def filter(s, cmd):
     "filter a string through a command that transforms its input to its output"
     for name, fn in filtertable.iteritems():
         if cmd.startswith(name):
             return fn(s, cmd[len(name):].lstrip())
     return pipefilter(s, cmd)
 
 def binary(s):
     """return true if a string is binary data"""
     return bool(s and '\0' in s)
 
 def increasingchunks(source, min=1024, max=65536):
     '''return no less than min bytes per chunk while data remains,
     doubling min after each chunk until it reaches max'''
     def log2(x):
         if not x:
             return 0
         i = 0
         while x:
             x >>= 1
             i += 1
         return i - 1
 
     buf = []
     blen = 0
     for chunk in source:
         buf.append(chunk)
         blen += len(chunk)
         if blen >= min:
             if min < max:
                 min = min << 1
                 nmin = 1 << log2(blen)
                 if nmin > min:
                     min = nmin
                 if min > max:
                     min = max
             yield ''.join(buf)
             blen = 0
             buf = []
     if buf:
         yield ''.join(buf)
 
 Abort = error.Abort
 
 def always(fn):
     return True
 
 def never(fn):
     return False
 
 def nogc(func):
     """disable garbage collector
 
     Python's garbage collector triggers a GC each time a certain number of
     container objects (the number being defined by gc.get_threshold()) are
     allocated even when marked not to be tracked by the collector. Tracking has
     no effect on when GCs are triggered, only on what objects the GC looks
     into. As a workaround, disable GC while building complex (huge)
     containers.
 
     This garbage collector issue have been fixed in 2.7.
     """
     if sys.version_info >= (2, 7):
         return func
     def wrapper(*args, **kwargs):
         gcenabled = gc.isenabled()
         gc.disable()
         try:
             return func(*args, **kwargs)
         finally:
             if gcenabled:
                 gc.enable()
     return wrapper
 
 def pathto(root, n1, n2):
     '''return the relative path from one place to another.
     root should use os.sep to separate directories
     n1 should use os.sep to separate directories
     n2 should use "/" to separate directories
     returns an os.sep-separated path.
 
     If n1 is a relative path, it's assumed it's
     relative to root.
     n2 should always be relative to root.
     '''
     if not n1:
         return localpath(n2)
     if os.path.isabs(n1):
         if os.path.splitdrive(root)[0] != os.path.splitdrive(n1)[0]:
             return os.path.join(root, localpath(n2))
         n2 = '/'.join((pconvert(root), n2))
     a, b = splitpath(n1), n2.split('/')
     a.reverse()
     b.reverse()
     while a and b and a[-1] == b[-1]:
         a.pop()
         b.pop()
     b.reverse()
     return pycompat.ossep.join((['..'] * len(a)) + b) or '.'
 
 def mainfrozen():
     """return True if we are a frozen executable.
 
     The code supports py2exe (most common, Windows only) and tools/freeze
     (portable, not much used).
     """
     return (safehasattr(sys, "frozen") or # new py2exe
             safehasattr(sys, "importers") or # old py2exe
             imp.is_frozen(u"__main__")) # tools/freeze
 
 # the location of data files matching the source code
 if mainfrozen() and getattr(sys, 'frozen', None) != 'macosx_app':
     # executable version (py2exe) doesn't support __file__
     datapath = os.path.dirname(pycompat.sysexecutable)
 else:
     datapath = os.path.dirname(pycompat.fsencode(__file__))
 
 i18n.setdatapath(datapath)
 
 _hgexecutable = None
 
 def hgexecutable():
     """return location of the 'hg' executable.
 
     Defaults to $HG or 'hg' in the search path.
     """
     if _hgexecutable is None:
         hg = encoding.environ.get('HG')
         mainmod = sys.modules[pycompat.sysstr('__main__')]
         if hg:
             _sethgexecutable(hg)
         elif mainfrozen():
             if getattr(sys, 'frozen', None) == 'macosx_app':
                 # Env variable set by py2app
                 _sethgexecutable(encoding.environ['EXECUTABLEPATH'])
             else:
                 _sethgexecutable(pycompat.sysexecutable)
         elif (os.path.basename(
             pycompat.fsencode(getattr(mainmod, '__file__', ''))) == 'hg'):
             _sethgexecutable(pycompat.fsencode(mainmod.__file__))
         else:
             exe = findexe('hg') or os.path.basename(sys.argv[0])
             _sethgexecutable(exe)
     return _hgexecutable
 
 def _sethgexecutable(path):
     """set location of the 'hg' executable"""
     global _hgexecutable
     _hgexecutable = path
 
 def _isstdout(f):
     fileno = getattr(f, 'fileno', None)
     return fileno and fileno() == sys.__stdout__.fileno()
 
 def shellenviron(environ=None):
     """return environ with optional override, useful for shelling out"""
     def py2shell(val):
         'convert python object into string that is useful to shell'
         if val is None or val is False:
             return '0'
         if val is True:
             return '1'
         return str(val)
     env = dict(encoding.environ)
     if environ:
         env.update((k, py2shell(v)) for k, v in environ.iteritems())
     env['HG'] = hgexecutable()
     return env
 
 def system(cmd, environ=None, cwd=None, out=None):
     '''enhanced shell command execution.
     run with environment maybe modified, maybe in different dir.
 
     if out is specified, it is assumed to be a file-like object that has a
     write() method. stdout and stderr will be redirected to out.'''
     try:
         stdout.flush()
     except Exception:
         pass
     cmd = quotecommand(cmd)
     env = shellenviron(environ)
     if out is None or _isstdout(out):
         rc = subprocess.call(cmd, shell=True, close_fds=closefds,
                              env=env, cwd=cwd)
     else:
         proc = subprocess.Popen(cmd, shell=True, close_fds=closefds,
                                 env=env, cwd=cwd, stdout=subprocess.PIPE,
                                 stderr=subprocess.STDOUT)
         for line in iter(proc.stdout.readline, ''):
             out.write(line)
         proc.wait()
         rc = proc.returncode
     if pycompat.sysplatform == 'OpenVMS' and rc & 1:
         rc = 0
     return rc
 
 def checksignature(func):
     '''wrap a function with code to check for calling errors'''
     def check(*args, **kwargs):
         try:
             return func(*args, **kwargs)
         except TypeError:
             if len(traceback.extract_tb(sys.exc_info()[2])) == 1:
                 raise error.SignatureError
             raise
 
     return check
 
 # a whilelist of known filesystems where hardlink works reliably
 _hardlinkfswhitelist = {
     'btrfs',
     'ext2',
     'ext3',
     'ext4',
     'hfs',
     'jfs',
     'reiserfs',
     'tmpfs',
     'ufs',
     'xfs',
     'zfs',
 }
 
 def copyfile(src, dest, hardlink=False, copystat=False, checkambig=False):
     '''copy a file, preserving mode and optionally other stat info like
     atime/mtime
 
     checkambig argument is used with filestat, and is useful only if
     destination file is guarded by any lock (e.g. repo.lock or
     repo.wlock).
 
     copystat and checkambig should be exclusive.
     '''
     assert not (copystat and checkambig)
     oldstat = None
     if os.path.lexists(dest):
         if checkambig:
             oldstat = checkambig and filestat.frompath(dest)
         unlink(dest)
     if hardlink:
         # Hardlinks are problematic on CIFS (issue4546), do not allow hardlinks
         # unless we are confident that dest is on a whitelisted filesystem.
         try:
             fstype = getfstype(os.path.dirname(dest))
         except OSError:
             fstype = None
         if fstype not in _hardlinkfswhitelist:
             hardlink = False
     if hardlink:
         try:
             oslink(src, dest)
             return
         except (IOError, OSError):
             pass # fall back to normal copy
     if os.path.islink(src):
         os.symlink(os.readlink(src), dest)
         # copytime is ignored for symlinks, but in general copytime isn't needed
         # for them anyway
     else:
         try:
             shutil.copyfile(src, dest)
             if copystat:
                 # copystat also copies mode
                 shutil.copystat(src, dest)
             else:
                 shutil.copymode(src, dest)
                 if oldstat and oldstat.stat:
                     newstat = filestat.frompath(dest)
                     if newstat.isambig(oldstat):
                         # stat of copied file is ambiguous to original one
                         advanced = (oldstat.stat.st_mtime + 1) & 0x7fffffff
                         os.utime(dest, (advanced, advanced))
         except shutil.Error as inst:
             raise Abort(str(inst))
 
 def copyfiles(src, dst, hardlink=None, progress=lambda t, pos: None):
     """Copy a directory tree using hardlinks if possible."""
     num = 0
 
     gettopic = lambda: hardlink and _('linking') or _('copying')
 
     if os.path.isdir(src):
         if hardlink is None:
             hardlink = (os.stat(src).st_dev ==
                         os.stat(os.path.dirname(dst)).st_dev)
         topic = gettopic()
         os.mkdir(dst)
         for name, kind in listdir(src):
             srcname = os.path.join(src, name)
             dstname = os.path.join(dst, name)
             def nprog(t, pos):
                 if pos is not None:
                     return progress(t, pos + num)
             hardlink, n = copyfiles(srcname, dstname, hardlink, progress=nprog)
             num += n
     else:
         if hardlink is None:
             hardlink = (os.stat(os.path.dirname(src)).st_dev ==
                         os.stat(os.path.dirname(dst)).st_dev)
         topic = gettopic()
 
         if hardlink:
             try:
                 oslink(src, dst)
             except (IOError, OSError):
                 hardlink = False
                 shutil.copy(src, dst)
         else:
             shutil.copy(src, dst)
         num += 1
         progress(topic, num)
     progress(topic, None)
 
     return hardlink, num
 
 _winreservednames = b'''con prn aux nul
     com1 com2 com3 com4 com5 com6 com7 com8 com9
     lpt1 lpt2 lpt3 lpt4 lpt5 lpt6 lpt7 lpt8 lpt9'''.split()
 _winreservedchars = ':*?"<>|'
 def checkwinfilename(path):
     r'''Check that the base-relative path is a valid filename on Windows.
     Returns None if the path is ok, or a UI string describing the problem.
 
     >>> checkwinfilename("just/a/normal/path")
     >>> checkwinfilename("foo/bar/con.xml")
     "filename contains 'con', which is reserved on Windows"
     >>> checkwinfilename("foo/con.xml/bar")
     "filename contains 'con', which is reserved on Windows"
     >>> checkwinfilename("foo/bar/xml.con")
     >>> checkwinfilename("foo/bar/AUX/bla.txt")
     "filename contains 'AUX', which is reserved on Windows"
     >>> checkwinfilename("foo/bar/bla:.txt")
     "filename contains ':', which is reserved on Windows"
     >>> checkwinfilename("foo/bar/b\07la.txt")
     "filename contains '\\x07', which is invalid on Windows"
     >>> checkwinfilename("foo/bar/bla ")
     "filename ends with ' ', which is not allowed on Windows"
     >>> checkwinfilename("../bar")
     >>> checkwinfilename("foo\\")
     "filename ends with '\\', which is invalid on Windows"
     >>> checkwinfilename("foo\\/bar")
     "directory name ends with '\\', which is invalid on Windows"
     '''
     if path.endswith('\\'):
         return _("filename ends with '\\', which is invalid on Windows")
     if '\\/' in path:
         return _("directory name ends with '\\', which is invalid on Windows")
     for n in path.replace('\\', '/').split('/'):
         if not n:
             continue
         for c in _filenamebytestr(n):
             if c in _winreservedchars:
                 return _("filename contains '%s', which is reserved "
                          "on Windows") % c
             if ord(c) <= 31:
                 return _("filename contains %r, which is invalid "
                          "on Windows") % c
         base = n.split('.')[0]
         if base and base.lower() in _winreservednames:
             return _("filename contains '%s', which is reserved "
                      "on Windows") % base
         t = n[-1]
         if t in '. ' and n not in '..':
             return _("filename ends with '%s', which is not allowed "
                      "on Windows") % t
 
 if pycompat.osname == 'nt':
     checkosfilename = checkwinfilename
     timer = time.clock
 else:
     checkosfilename = platform.checkosfilename
     timer = time.time
 
 if safehasattr(time, "perf_counter"):
     timer = time.perf_counter
 
 def makelock(info, pathname):
     try:
         return os.symlink(info, pathname)
     except OSError as why:
         if why.errno == errno.EEXIST:
             raise
     except AttributeError: # no symlink in os
         pass
 
     ld = os.open(pathname, os.O_CREAT | os.O_WRONLY | os.O_EXCL)
     os.write(ld, info)
     os.close(ld)
 
 def readlock(pathname):
     try:
         return os.readlink(pathname)
     except OSError as why:
         if why.errno not in (errno.EINVAL, errno.ENOSYS):
             raise
     except AttributeError: # no symlink in os
         pass
     fp = posixfile(pathname)
     r = fp.read()
     fp.close()
     return r
 
 def fstat(fp):
     '''stat file object that may not have fileno method.'''
     try:
         return os.fstat(fp.fileno())
     except AttributeError:
         return os.stat(fp.name)
 
 # File system features
 
 def fscasesensitive(path):
     """
     Return true if the given path is on a case-sensitive filesystem
 
     Requires a path (like /foo/.hg) ending with a foldable final
     directory component.
     """
     s1 = os.lstat(path)
     d, b = os.path.split(path)
     b2 = b.upper()
     if b == b2:
         b2 = b.lower()
         if b == b2:
             return True # no evidence against case sensitivity
     p2 = os.path.join(d, b2)
     try:
         s2 = os.lstat(p2)
         if s2 == s1:
             return False
         return True
     except OSError:
         return True
 
 try:
     import re2
     _re2 = None
 except ImportError:
     _re2 = False
 
 class _re(object):
     def _checkre2(self):
         global _re2
         try:
             # check if match works, see issue3964
             _re2 = bool(re2.match(r'\[([^\[]+)\]', '[ui]'))
         except ImportError:
             _re2 = False
 
     def compile(self, pat, flags=0):
         '''Compile a regular expression, using re2 if possible
 
         For best performance, use only re2-compatible regexp features. The
         only flags from the re module that are re2-compatible are
         IGNORECASE and MULTILINE.'''
         if _re2 is None:
             self._checkre2()
         if _re2 and (flags & ~(remod.IGNORECASE | remod.MULTILINE)) == 0:
             if flags & remod.IGNORECASE:
                 pat = '(?i)' + pat
             if flags & remod.MULTILINE:
                 pat = '(?m)' + pat
             try:
                 return re2.compile(pat)
             except re2.error:
                 pass
         return remod.compile(pat, flags)
 
     @propertycache
     def escape(self):
         '''Return the version of escape corresponding to self.compile.
 
         This is imperfect because whether re2 or re is used for a particular
         function depends on the flags, etc, but it's the best we can do.
         '''
         global _re2
         if _re2 is None:
             self._checkre2()
         if _re2:
             return re2.escape
         else:
             return remod.escape
 
 re = _re()
 
 _fspathcache = {}
 def fspath(name, root):
     '''Get name in the case stored in the filesystem
 
     The name should be relative to root, and be normcase-ed for efficiency.
 
     Note that this function is unnecessary, and should not be
     called, for case-sensitive filesystems (simply because it's expensive).
 
     The root should be normcase-ed, too.
     '''
     def _makefspathcacheentry(dir):
         return dict((normcase(n), n) for n in os.listdir(dir))
 
     seps = pycompat.ossep
     if pycompat.osaltsep:
         seps = seps + pycompat.osaltsep
     # Protect backslashes. This gets silly very quickly.
     seps.replace('\\','\\\\')
     pattern = remod.compile(br'([^%s]+)|([%s]+)' % (seps, seps))
     dir = os.path.normpath(root)
     result = []
     for part, sep in pattern.findall(name):
         if sep:
             result.append(sep)
             continue
 
         if dir not in _fspathcache:
             _fspathcache[dir] = _makefspathcacheentry(dir)
         contents = _fspathcache[dir]
 
         found = contents.get(part)
         if not found:
             # retry "once per directory" per "dirstate.walk" which
             # may take place for each patches of "hg qpush", for example
             _fspathcache[dir] = contents = _makefspathcacheentry(dir)
             found = contents.get(part)
 
         result.append(found or part)
         dir = os.path.join(dir, part)
 
     return ''.join(result)
 
 def getfstype(dirpath):
     '''Get the filesystem type name from a directory (best-effort)
 
     Returns None if we are unsure. Raises OSError on ENOENT, EPERM, etc.
     '''
     return getattr(osutil, 'getfstype', lambda x: None)(dirpath)
 
 def checknlink(testfile):
     '''check whether hardlink count reporting works properly'''
 
     # testfile may be open, so we need a separate file for checking to
     # work around issue2543 (or testfile may get lost on Samba shares)
     f1 = testfile + ".hgtmp1"
     if os.path.lexists(f1):
         return False
     try:
         posixfile(f1, 'w').close()
     except IOError:
         try:
             os.unlink(f1)
         except OSError:
             pass
         return False
 
     f2 = testfile + ".hgtmp2"
     fd = None
     try:
         oslink(f1, f2)
         # nlinks() may behave differently for files on Windows shares if
         # the file is open.
         fd = posixfile(f2)
         return nlinks(f2) > 1
     except OSError:
         return False
     finally:
         if fd is not None:
             fd.close()
         for f in (f1, f2):
             try:
                 os.unlink(f)
             except OSError:
                 pass
 
 def endswithsep(path):
     '''Check path ends with os.sep or os.altsep.'''
     return (path.endswith(pycompat.ossep)
             or pycompat.osaltsep and path.endswith(pycompat.osaltsep))
 
 def splitpath(path):
     '''Split path by os.sep.
     Note that this function does not use os.altsep because this is
     an alternative of simple "xxx.split(os.sep)".
     It is recommended to use os.path.normpath() before using this
     function if need.'''
     return path.split(pycompat.ossep)
 
 def gui():
     '''Are we running in a GUI?'''
     if pycompat.sysplatform == 'darwin':
         if 'SSH_CONNECTION' in encoding.environ:
             # handle SSH access to a box where the user is logged in
             return False
         elif getattr(osutil, 'isgui', None):
             # check if a CoreGraphics session is available
             return osutil.isgui()
         else:
             # pure build; use a safe default
             return True
     else:
         return pycompat.osname == "nt" or encoding.environ.get("DISPLAY")
 
 def mktempcopy(name, emptyok=False, createmode=None):
     """Create a temporary file with the same contents from name
 
     The permission bits are copied from the original file.
 
     If the temporary file is going to be truncated immediately, you
     can use emptyok=True as an optimization.
 
     Returns the name of the temporary file.
     """
     d, fn = os.path.split(name)
     fd, temp = tempfile.mkstemp(prefix='.%s-' % fn, dir=d)
     os.close(fd)
     # Temporary files are created with mode 0600, which is usually not
     # what we want.  If the original file already exists, just copy
     # its mode.  Otherwise, manually obey umask.
     copymode(name, temp, createmode)
     if emptyok:
         return temp
     try:
         try:
             ifp = posixfile(name, "rb")
         except IOError as inst:
             if inst.errno == errno.ENOENT:
                 return temp
             if not getattr(inst, 'filename', None):
                 inst.filename = name
             raise
         ofp = posixfile(temp, "wb")
         for chunk in filechunkiter(ifp):
             ofp.write(chunk)
         ifp.close()
         ofp.close()
     except: # re-raises
         try: os.unlink(temp)
         except OSError: pass
         raise
     return temp
 
 class filestat(object):
     """help to exactly detect change of a file
 
     'stat' attribute is result of 'os.stat()' if specified 'path'
     exists. Otherwise, it is None. This can avoid preparative
     'exists()' examination on client side of this class.
     """
     def __init__(self, stat):
         self.stat = stat
 
     @classmethod
     def frompath(cls, path):
         try:
             stat = os.stat(path)
         except OSError as err:
             if err.errno != errno.ENOENT:
                 raise
             stat = None
         return cls(stat)
 
     @classmethod
     def fromfp(cls, fp):
         stat = os.fstat(fp.fileno())
         return cls(stat)
 
     __hash__ = object.__hash__
 
     def __eq__(self, old):
         try:
             # if ambiguity between stat of new and old file is
             # avoided, comparison of size, ctime and mtime is enough
             # to exactly detect change of a file regardless of platform
             return (self.stat.st_size == old.stat.st_size and
                     self.stat.st_ctime == old.stat.st_ctime and
                     self.stat.st_mtime == old.stat.st_mtime)
         except AttributeError:
             pass
         try:
             return self.stat is None and old.stat is None
         except AttributeError:
             return False
 
     def isambig(self, old):
         """Examine whether new (= self) stat is ambiguous against old one
 
         "S[N]" below means stat of a file at N-th change:
 
         - S[n-1].ctime  < S[n].ctime: can detect change of a file
         - S[n-1].ctime == S[n].ctime
           - S[n-1].ctime  < S[n].mtime: means natural advancing (*1)
           - S[n-1].ctime == S[n].mtime: is ambiguous (*2)
           - S[n-1].ctime  > S[n].mtime: never occurs naturally (don't care)
         - S[n-1].ctime  > S[n].ctime: never occurs naturally (don't care)
 
         Case (*2) above means that a file was changed twice or more at
         same time in sec (= S[n-1].ctime), and comparison of timestamp
         is ambiguous.
 
         Base idea to avoid such ambiguity is "advance mtime 1 sec, if
         timestamp is ambiguous".
 
         But advancing mtime only in case (*2) doesn't work as
         expected, because naturally advanced S[n].mtime in case (*1)
         might be equal to manually advanced S[n-1 or earlier].mtime.
 
         Therefore, all "S[n-1].ctime == S[n].ctime" cases should be
         treated as ambiguous regardless of mtime, to avoid overlooking
         by confliction between such mtime.
 
         Advancing mtime "if isambig(oldstat)" ensures "S[n-1].mtime !=
         S[n].mtime", even if size of a file isn't changed.
         """
         try:
             return (self.stat.st_ctime == old.stat.st_ctime)
         except AttributeError:
             return False
 
     def avoidambig(self, path, old):
         """Change file stat of specified path to avoid ambiguity
 
         'old' should be previous filestat of 'path'.
 
         This skips avoiding ambiguity, if a process doesn't have
         appropriate privileges for 'path'. This returns False in this
         case.
 
         Otherwise, this returns True, as "ambiguity is avoided".
         """
         advanced = (old.stat.st_mtime + 1) & 0x7fffffff
         try:
             os.utime(path, (advanced, advanced))
         except OSError as inst:
             if inst.errno == errno.EPERM:
                 # utime() on the file created by another user causes EPERM,
                 # if a process doesn't have appropriate privileges
                 return False
             raise
         return True
 
     def __ne__(self, other):
         return not self == other
 
 class atomictempfile(object):
     '''writable file object that atomically updates a file
 
     All writes will go to a temporary copy of the original file. Call
     close() when you are done writing, and atomictempfile will rename
     the temporary copy to the original name, making the changes
     visible. If the object is destroyed without being closed, all your
     writes are discarded.
 
     checkambig argument of constructor is used with filestat, and is
     useful only if target file is guarded by any lock (e.g. repo.lock
     or repo.wlock).
     '''
     def __init__(self, name, mode='w+b', createmode=None, checkambig=False):
         self.__name = name      # permanent name
         self._tempname = mktempcopy(name, emptyok=('w' in mode),
                                     createmode=createmode)
         self._fp = posixfile(self._tempname, mode)
         self._checkambig = checkambig
 
         # delegated methods
         self.read = self._fp.read
         self.write = self._fp.write
         self.seek = self._fp.seek
         self.tell = self._fp.tell
         self.fileno = self._fp.fileno
 
     def close(self):
         if not self._fp.closed:
             self._fp.close()
             filename = localpath(self.__name)
             oldstat = self._checkambig and filestat.frompath(filename)
             if oldstat and oldstat.stat:
                 rename(self._tempname, filename)
                 newstat = filestat.frompath(filename)
                 if newstat.isambig(oldstat):
                     # stat of changed file is ambiguous to original one
                     advanced = (oldstat.stat.st_mtime + 1) & 0x7fffffff
                     os.utime(filename, (advanced, advanced))
             else:
                 rename(self._tempname, filename)
 
     def discard(self):
         if not self._fp.closed:
             try:
                 os.unlink(self._tempname)
             except OSError:
                 pass
             self._fp.close()
 
     def __del__(self):
         if safehasattr(self, '_fp'): # constructor actually did something
             self.discard()
 
     def __enter__(self):
         return self
 
     def __exit__(self, exctype, excvalue, traceback):
         if exctype is not None:
             self.discard()
         else:
             self.close()
 
 def unlinkpath(f, ignoremissing=False):
     """unlink and remove the directory if it is empty"""
     if ignoremissing:
         tryunlink(f)
     else:
         unlink(f)
     # try removing directories that might now be empty
     try:
         removedirs(os.path.dirname(f))
     except OSError:
         pass
 
 def tryunlink(f):
     """Attempt to remove a file, ignoring ENOENT errors."""
     try:
         unlink(f)
     except OSError as e:
         if e.errno != errno.ENOENT:
             raise
 
 def makedirs(name, mode=None, notindexed=False):
     """recursive directory creation with parent mode inheritance
 
     Newly created directories are marked as "not to be indexed by
     the content indexing service", if ``notindexed`` is specified
     for "write" mode access.
     """
     try:
         makedir(name, notindexed)
     except OSError as err:
         if err.errno == errno.EEXIST:
             return
         if err.errno != errno.ENOENT or not name:
             raise
         parent = os.path.dirname(os.path.abspath(name))
         if parent == name:
             raise
         makedirs(parent, mode, notindexed)
         try:
             makedir(name, notindexed)
         except OSError as err:
             # Catch EEXIST to handle races
             if err.errno == errno.EEXIST:
                 return
             raise
     if mode is not None:
         os.chmod(name, mode)
 
 def readfile(path):
     with open(path, 'rb') as fp:
         return fp.read()
 
 def writefile(path, text):
     with open(path, 'wb') as fp:
         fp.write(text)
 
 def appendfile(path, text):
     with open(path, 'ab') as fp:
         fp.write(text)
 
 class chunkbuffer(object):
     """Allow arbitrary sized chunks of data to be efficiently read from an
     iterator over chunks of arbitrary size."""
 
     def __init__(self, in_iter):
         """in_iter is the iterator that's iterating over the input chunks."""
         def splitbig(chunks):
             for chunk in chunks:
                 if len(chunk) > 2**20:
                     pos = 0
                     while pos < len(chunk):
                         end = pos + 2 ** 18
                         yield chunk[pos:end]
                         pos = end
                 else:
                     yield chunk
         self.iter = splitbig(in_iter)
         self._queue = collections.deque()
         self._chunkoffset = 0
 
     def read(self, l=None):
         """Read L bytes of data from the iterator of chunks of data.
         Returns less than L bytes if the iterator runs dry.
 
         If size parameter is omitted, read everything"""
         if l is None:
             return ''.join(self.iter)
 
         left = l
         buf = []
         queue = self._queue
         while left > 0:
             # refill the queue
             if not queue:
                 target = 2**18
                 for chunk in self.iter:
                     queue.append(chunk)
                     target -= len(chunk)
                     if target <= 0:
                         break
                 if not queue:
                     break
 
             # The easy way to do this would be to queue.popleft(), modify the
             # chunk (if necessary), then queue.appendleft(). However, for cases
             # where we read partial chunk content, this incurs 2 dequeue
             # mutations and creates a new str for the remaining chunk in the
             # queue. Our code below avoids this overhead.
 
             chunk = queue[0]
             chunkl = len(chunk)
             offset = self._chunkoffset
 
             # Use full chunk.
             if offset == 0 and left >= chunkl:
                 left -= chunkl
                 queue.popleft()
                 buf.append(chunk)
                 # self._chunkoffset remains at 0.
                 continue
 
             chunkremaining = chunkl - offset
 
             # Use all of unconsumed part of chunk.
             if left >= chunkremaining:
                 left -= chunkremaining
                 queue.popleft()
                 # offset == 0 is enabled by block above, so this won't merely
                 # copy via ``chunk[0:]``.
                 buf.append(chunk[offset:])
                 self._chunkoffset = 0
 
             # Partial chunk needed.
             else:
                 buf.append(chunk[offset:offset + left])
                 self._chunkoffset += left
                 left -= chunkremaining
 
         return ''.join(buf)
 
 def filechunkiter(f, size=131072, limit=None):
     """Create a generator that produces the data in the file size
     (default 131072) bytes at a time, up to optional limit (default is
     to read all data).  Chunks may be less than size bytes if the
     chunk is the last chunk in the file, or the file is a socket or
     some other type of file that sometimes reads less data than is
     requested."""
     assert size >= 0
     assert limit is None or limit >= 0
     while True:
         if limit is None:
             nbytes = size
         else:
             nbytes = min(limit, size)
         s = nbytes and f.read(nbytes)
         if not s:
             break
         if limit:
             limit -= len(s)
         yield s
 
 def makedate(timestamp=None):
     '''Return a unix timestamp (or the current time) as a (unixtime,
     offset) tuple based off the local timezone.'''
     if timestamp is None:
         timestamp = time.time()
     if timestamp < 0:
         hint = _("check your clock")
         raise Abort(_("negative timestamp: %d") % timestamp, hint=hint)
     delta = (datetime.datetime.utcfromtimestamp(timestamp) -
              datetime.datetime.fromtimestamp(timestamp))
     tz = delta.days * 86400 + delta.seconds
     return timestamp, tz
 
 def datestr(date=None, format='%a %b %d %H:%M:%S %Y %1%2'):
     """represent a (unixtime, offset) tuple as a localized time.
     unixtime is seconds since the epoch, and offset is the time zone's
     number of seconds away from UTC.
 
     >>> datestr((0, 0))
     'Thu Jan 01 00:00:00 1970 +0000'
     >>> datestr((42, 0))
     'Thu Jan 01 00:00:42 1970 +0000'
     >>> datestr((-42, 0))
     'Wed Dec 31 23:59:18 1969 +0000'
     >>> datestr((0x7fffffff, 0))
     'Tue Jan 19 03:14:07 2038 +0000'
     >>> datestr((-0x80000000, 0))
     'Fri Dec 13 20:45:52 1901 +0000'
     """
     t, tz = date or makedate()
     if "%1" in format or "%2" in format or "%z" in format:
         sign = (tz > 0) and "-" or "+"
         minutes = abs(tz) // 60
         q, r = divmod(minutes, 60)
         format = format.replace("%z", "%1%2")
         format = format.replace("%1", "%c%02d" % (sign, q))
         format = format.replace("%2", "%02d" % r)
     d = t - tz
     if d > 0x7fffffff:
         d = 0x7fffffff
     elif d < -0x80000000:
         d = -0x80000000
     # Never use time.gmtime() and datetime.datetime.fromtimestamp()
     # because they use the gmtime() system call which is buggy on Windows
     # for negative values.
     t = datetime.datetime(1970, 1, 1) + datetime.timedelta(seconds=d)
     s = encoding.strtolocal(t.strftime(encoding.strfromlocal(format)))
     return s
 
 def shortdate(date=None):
     """turn (timestamp, tzoff) tuple into iso 8631 date."""
     return datestr(date, format='%Y-%m-%d')
 
 def parsetimezone(s):
     """find a trailing timezone, if any, in string, and return a
        (offset, remainder) pair"""
 
     if s.endswith("GMT") or s.endswith("UTC"):
         return 0, s[:-3].rstrip()
 
     # Unix-style timezones [+-]hhmm
     if len(s) >= 5 and s[-5] in "+-" and s[-4:].isdigit():
         sign = (s[-5] == "+") and 1 or -1
         hours = int(s[-4:-2])
         minutes = int(s[-2:])
         return -sign * (hours * 60 + minutes) * 60, s[:-5].rstrip()
 
     # ISO8601 trailing Z
     if s.endswith("Z") and s[-2:-1].isdigit():
         return 0, s[:-1]
 
     # ISO8601-style [+-]hh:mm
     if (len(s) >= 6 and s[-6] in "+-" and s[-3] == ":" and
         s[-5:-3].isdigit() and s[-2:].isdigit()):
         sign = (s[-6] == "+") and 1 or -1
         hours = int(s[-5:-3])
         minutes = int(s[-2:])
         return -sign * (hours * 60 + minutes) * 60, s[:-6]
 
     return None, s
 
 def strdate(string, format, defaults=None):
     """parse a localized time string and return a (unixtime, offset) tuple.
     if the string cannot be parsed, ValueError is raised."""
     if defaults is None:
         defaults = {}
 
     # NOTE: unixtime = localunixtime + offset
     offset, date = parsetimezone(string)
 
     # add missing elements from defaults
     usenow = False # default to using biased defaults
     for part in ("S", "M", "HI", "d", "mb", "yY"): # decreasing specificity
         part = pycompat.bytestr(part)
         found = [True for p in part if ("%"+p) in format]
         if not found:
             date += "@" + defaults[part][usenow]
             format += "@%" + part[0]
         else:
             # We've found a specific time element, less specific time
             # elements are relative to today
             usenow = True
 
     timetuple = time.strptime(encoding.strfromlocal(date),
                               encoding.strfromlocal(format))
     localunixtime = int(calendar.timegm(timetuple))
     if offset is None:
         # local timezone
         unixtime = int(time.mktime(timetuple))
         offset = unixtime - localunixtime
     else:
         unixtime = localunixtime + offset
     return unixtime, offset
 
 def parsedate(date, formats=None, bias=None):
     """parse a localized date/time and return a (unixtime, offset) tuple.
 
     The date may be a "unixtime offset" string or in one of the specified
     formats. If the date already is a (unixtime, offset) tuple, it is returned.
 
     >>> parsedate(' today ') == parsedate(\
                                   datetime.date.today().strftime('%b %d'))
     True
     >>> parsedate( 'yesterday ') == parsedate((datetime.date.today() -\
                                                datetime.timedelta(days=1)\
                                               ).strftime('%b %d'))
     True
     >>> now, tz = makedate()
     >>> strnow, strtz = parsedate('now')
     >>> (strnow - now) < 1
     True
     >>> tz == strtz
     True
     """
     if bias is None:
         bias = {}
     if not date:
         return 0, 0
     if isinstance(date, tuple) and len(date) == 2:
         return date
     if not formats:
         formats = defaultdateformats
     date = date.strip()
 
     if date == 'now' or date == _('now'):
         return makedate()
     if date == 'today' or date == _('today'):
         date = datetime.date.today().strftime('%b %d')
     elif date == 'yesterday' or date == _('yesterday'):
         date = (datetime.date.today() -
                 datetime.timedelta(days=1)).strftime('%b %d')
 
     try:
         when, offset = map(int, date.split(' '))
     except ValueError:
         # fill out defaults
         now = makedate()
         defaults = {}
         for part in ("d", "mb", "yY", "HI", "M", "S"):
             # this piece is for rounding the specific end of unknowns
             b = bias.get(part)
             if b is None:
                 if part[0:1] in "HMS":
                     b = "00"
                 else:
                     b = "0"
 
             # this piece is for matching the generic end to today's date
             n = datestr(now, "%" + part[0:1])
 
             defaults[part] = (b, n)
 
         for format in formats:
             try:
                 when, offset = strdate(date, format, defaults)
             except (ValueError, OverflowError):
                 pass
             else:
                 break
         else:
             raise error.ParseError(_('invalid date: %r') % date)
     # validate explicit (probably user-specified) date and
     # time zone offset. values must fit in signed 32 bits for
     # current 32-bit linux runtimes. timezones go from UTC-12
     # to UTC+14
     if when < -0x80000000 or when > 0x7fffffff:
         raise error.ParseError(_('date exceeds 32 bits: %d') % when)
     if offset < -50400 or offset > 43200:
         raise error.ParseError(_('impossible time zone offset: %d') % offset)
     return when, offset
 
 def matchdate(date):
     """Return a function that matches a given date match specifier
 
     Formats include:
 
     '{date}' match a given date to the accuracy provided
 
     '<{date}' on or before a given date
 
     '>{date}' on or after a given date
 
     >>> p1 = parsedate("10:29:59")
     >>> p2 = parsedate("10:30:00")
     >>> p3 = parsedate("10:30:59")
     >>> p4 = parsedate("10:31:00")
     >>> p5 = parsedate("Sep 15 10:30:00 1999")
     >>> f = matchdate("10:30")
     >>> f(p1[0])
     False
     >>> f(p2[0])
     True
     >>> f(p3[0])
     True
     >>> f(p4[0])
     False
     >>> f(p5[0])
     False
     """
 
     def lower(date):
         d = {'mb': "1", 'd': "1"}
         return parsedate(date, extendeddateformats, d)[0]
 
     def upper(date):
         d = {'mb': "12", 'HI': "23", 'M': "59", 'S': "59"}
         for days in ("31", "30", "29"):
             try:
                 d["d"] = days
                 return parsedate(date, extendeddateformats, d)[0]
             except Abort:
                 pass
         d["d"] = "28"
         return parsedate(date, extendeddateformats, d)[0]
 
     date = date.strip()
 
     if not date:
         raise Abort(_("dates cannot consist entirely of whitespace"))
     elif date[0] == "<":
         if not date[1:]:
             raise Abort(_("invalid day spec, use '<DATE'"))
         when = upper(date[1:])
         return lambda x: x <= when
     elif date[0] == ">":
         if not date[1:]:
             raise Abort(_("invalid day spec, use '>DATE'"))
         when = lower(date[1:])
         return lambda x: x >= when
     elif date[0] == "-":
         try:
             days = int(date[1:])
         except ValueError:
             raise Abort(_("invalid day spec: %s") % date[1:])
         if days < 0:
             raise Abort(_("%s must be nonnegative (see 'hg help dates')")
                 % date[1:])
         when = makedate()[0] - days * 3600 * 24
         return lambda x: x >= when
     elif " to " in date:
         a, b = date.split(" to ")
         start, stop = lower(a), upper(b)
         return lambda x: x >= start and x <= stop
     else:
         start, stop = lower(date), upper(date)
         return lambda x: x >= start and x <= stop
 
 def stringmatcher(pattern, casesensitive=True):
     """
     accepts a string, possibly starting with 're:' or 'literal:' prefix.
     returns the matcher name, pattern, and matcher function.
     missing or unknown prefixes are treated as literal matches.
 
     helper for tests:
     >>> def test(pattern, *tests):
     ...     kind, pattern, matcher = stringmatcher(pattern)
     ...     return (kind, pattern, [bool(matcher(t)) for t in tests])
     >>> def itest(pattern, *tests):
     ...     kind, pattern, matcher = stringmatcher(pattern, casesensitive=False)
     ...     return (kind, pattern, [bool(matcher(t)) for t in tests])
 
     exact matching (no prefix):
     >>> test('abcdefg', 'abc', 'def', 'abcdefg')
     ('literal', 'abcdefg', [False, False, True])
 
     regex matching ('re:' prefix)
     >>> test('re:a.+b', 'nomatch', 'fooadef', 'fooadefbar')
     ('re', 'a.+b', [False, False, True])
 
     force exact matches ('literal:' prefix)
     >>> test('literal:re:foobar', 'foobar', 're:foobar')
     ('literal', 're:foobar', [False, True])
 
     unknown prefixes are ignored and treated as literals
     >>> test('foo:bar', 'foo', 'bar', 'foo:bar')
     ('literal', 'foo:bar', [False, False, True])
 
     case insensitive regex matches
     >>> itest('re:A.+b', 'nomatch', 'fooadef', 'fooadefBar')
     ('re', 'A.+b', [False, False, True])
 
     case insensitive literal matches
     >>> itest('ABCDEFG', 'abc', 'def', 'abcdefg')
     ('literal', 'ABCDEFG', [False, False, True])
     """
     if pattern.startswith('re:'):
         pattern = pattern[3:]
         try:
             flags = 0
             if not casesensitive:
                 flags = remod.I
             regex = remod.compile(pattern, flags)
         except remod.error as e:
             raise error.ParseError(_('invalid regular expression: %s')
                                    % e)
         return 're', pattern, regex.search
     elif pattern.startswith('literal:'):
         pattern = pattern[8:]
 
     match = pattern.__eq__
 
     if not casesensitive:
         ipat = encoding.lower(pattern)
         match = lambda s: ipat == encoding.lower(s)
     return 'literal', pattern, match
 
 def shortuser(user):
     """Return a short representation of a user name or email address."""
     f = user.find('@')
     if f >= 0:
         user = user[:f]
     f = user.find('<')
     if f >= 0:
         user = user[f + 1:]
     f = user.find(' ')
     if f >= 0:
         user = user[:f]
     f = user.find('.')
     if f >= 0:
         user = user[:f]
     return user
 
 def emailuser(user):
     """Return the user portion of an email address."""
     f = user.find('@')
     if f >= 0:
         user = user[:f]
     f = user.find('<')
     if f >= 0:
         user = user[f + 1:]
     return user
 
 def email(author):
     '''get email of author.'''
     r = author.find('>')
     if r == -1:
         r = None
     return author[author.find('<') + 1:r]
 
 def ellipsis(text, maxlength=400):
     """Trim string to at most maxlength (default: 400) columns in display."""
     return encoding.trim(text, maxlength, ellipsis='...')
 
 def unitcountfn(*unittable):
     '''return a function that renders a readable count of some quantity'''
 
     def go(count):
         for multiplier, divisor, format in unittable:
             if abs(count) >= divisor * multiplier:
                 return format % (count / float(divisor))
         return unittable[-1][2] % count
 
     return go
 
 def processlinerange(fromline, toline):
     """Check that linerange <fromline>:<toline> makes sense and return a
     0-based range.
 
     >>> processlinerange(10, 20)
     (9, 20)
     >>> processlinerange(2, 1)
     Traceback (most recent call last):
         ...
     ParseError: line range must be positive
     >>> processlinerange(0, 5)
     Traceback (most recent call last):
         ...
     ParseError: fromline must be strictly positive
     """
     if toline - fromline < 0:
         raise error.ParseError(_("line range must be positive"))
     if fromline < 1:
         raise error.ParseError(_("fromline must be strictly positive"))
     return fromline - 1, toline
 
 bytecount = unitcountfn(
     (100, 1 << 30, _('%.0f GB')),
     (10, 1 << 30, _('%.1f GB')),
     (1, 1 << 30, _('%.2f GB')),
     (100, 1 << 20, _('%.0f MB')),
     (10, 1 << 20, _('%.1f MB')),
     (1, 1 << 20, _('%.2f MB')),
     (100, 1 << 10, _('%.0f KB')),
     (10, 1 << 10, _('%.1f KB')),
     (1, 1 << 10, _('%.2f KB')),
     (1, 1, _('%.0f bytes')),
     )
 
 # Matches a single EOL which can either be a CRLF where repeated CR
 # are removed or a LF. We do not care about old Macintosh files, so a
 # stray CR is an error.
 _eolre = remod.compile(br'\r*\n')
 
 def tolf(s):
     return _eolre.sub('\n', s)
 
 def tocrlf(s):
     return _eolre.sub('\r\n', s)
 
 if pycompat.oslinesep == '\r\n':
     tonativeeol = tocrlf
     fromnativeeol = tolf
 else:
     tonativeeol = pycompat.identity
     fromnativeeol = pycompat.identity
 
 def escapestr(s):
     # call underlying function of s.encode('string_escape') directly for
     # Python 3 compatibility
     return codecs.escape_encode(s)[0]
 
 def unescapestr(s):
     return codecs.escape_decode(s)[0]
 
 def uirepr(s):
     # Avoid double backslash in Windows path repr()
     return repr(s).replace('\\\\', '\\')
 
 # delay import of textwrap
 def MBTextWrapper(**kwargs):
     class tw(textwrap.TextWrapper):
         """
         Extend TextWrapper for width-awareness.
 
         Neither number of 'bytes' in any encoding nor 'characters' is
         appropriate to calculate terminal columns for specified string.
 
         Original TextWrapper implementation uses built-in 'len()' directly,
         so overriding is needed to use width information of each characters.
 
         In addition, characters classified into 'ambiguous' width are
         treated as wide in East Asian area, but as narrow in other.
 
         This requires use decision to determine width of such characters.
         """
         def _cutdown(self, ucstr, space_left):
             l = 0
             colwidth = encoding.ucolwidth
             for i in xrange(len(ucstr)):
                 l += colwidth(ucstr[i])
                 if space_left < l:
                     return (ucstr[:i], ucstr[i:])
             return ucstr, ''
 
         # overriding of base class
         def _handle_long_word(self, reversed_chunks, cur_line, cur_len, width):
             space_left = max(width - cur_len, 1)
 
             if self.break_long_words:
                 cut, res = self._cutdown(reversed_chunks[-1], space_left)
                 cur_line.append(cut)
                 reversed_chunks[-1] = res
             elif not cur_line:
                 cur_line.append(reversed_chunks.pop())
 
         # this overriding code is imported from TextWrapper of Python 2.6
         # to calculate columns of string by 'encoding.ucolwidth()'
         def _wrap_chunks(self, chunks):
             colwidth = encoding.ucolwidth
 
             lines = []
             if self.width <= 0:
                 raise ValueError("invalid width %r (must be > 0)" % self.width)
 
             # Arrange in reverse order so items can be efficiently popped
             # from a stack of chucks.
             chunks.reverse()
 
             while chunks:
 
                 # Start the list of chunks that will make up the current line.
                 # cur_len is just the length of all the chunks in cur_line.
                 cur_line = []
                 cur_len = 0
 
                 # Figure out which static string will prefix this line.
                 if lines:
                     indent = self.subsequent_indent
                 else:
                     indent = self.initial_indent
 
                 # Maximum width for this line.
                 width = self.width - len(indent)
 
                 # First chunk on line is whitespace -- drop it, unless this
                 # is the very beginning of the text (i.e. no lines started yet).
                 if self.drop_whitespace and chunks[-1].strip() == r'' and lines:
                     del chunks[-1]
 
                 while chunks:
                     l = colwidth(chunks[-1])
 
                     # Can at least squeeze this chunk onto the current line.
                     if cur_len + l <= width:
                         cur_line.append(chunks.pop())
                         cur_len += l
 
                     # Nope, this line is full.
                     else:
                         break
 
                 # The current line is full, and the next chunk is too big to
                 # fit on *any* line (not just this one).
                 if chunks and colwidth(chunks[-1]) > width:
                     self._handle_long_word(chunks, cur_line, cur_len, width)
 
                 # If the last chunk on this line is all whitespace, drop it.
                 if (self.drop_whitespace and
                     cur_line and cur_line[-1].strip() == r''):
                     del cur_line[-1]
 
                 # Convert current line back to a string and store it in list
                 # of all lines (return value).
                 if cur_line:
                     lines.append(indent + r''.join(cur_line))
 
             return lines
 
     global MBTextWrapper
     MBTextWrapper = tw
     return tw(**kwargs)
 
 def wrap(line, width, initindent='', hangindent=''):
     maxindent = max(len(hangindent), len(initindent))
     if width <= maxindent:
         # adjust for weird terminal size
         width = max(78, maxindent + 1)
     line = line.decode(pycompat.sysstr(encoding.encoding),
                     pycompat.sysstr(encoding.encodingmode))
     initindent = initindent.decode(pycompat.sysstr(encoding.encoding),
                     pycompat.sysstr(encoding.encodingmode))
     hangindent = hangindent.decode(pycompat.sysstr(encoding.encoding),
                     pycompat.sysstr(encoding.encodingmode))
     wrapper = MBTextWrapper(width=width,
                             initial_indent=initindent,
                             subsequent_indent=hangindent)
     return wrapper.fill(line).encode(pycompat.sysstr(encoding.encoding))
 
 if (pyplatform.python_implementation() == 'CPython' and
     sys.version_info < (3, 0)):
     # There is an issue in CPython that some IO methods do not handle EINTR
     # correctly. The following table shows what CPython version (and functions)
     # are affected (buggy: has the EINTR bug, okay: otherwise):
     #
     #                | < 2.7.4 | 2.7.4 to 2.7.12 | >= 3.0
     #   --------------------------------------------------
     #    fp.__iter__ | buggy   | buggy           | okay
     #    fp.read*    | buggy   | okay [1]        | okay
     #
     # [1]: fixed by changeset 67dc99a989cd in the cpython hg repo.
     #
     # Here we workaround the EINTR issue for fileobj.__iter__. Other methods
     # like "read*" are ignored for now, as Python < 2.7.4 is a minority.
     #
     # Although we can workaround the EINTR issue for fp.__iter__, it is slower:
     # "for x in fp" is 4x faster than "for x in iter(fp.readline, '')" in
     # CPython 2, because CPython 2 maintains an internal readahead buffer for
     # fp.__iter__ but not other fp.read* methods.
     #
     # On modern systems like Linux, the "read" syscall cannot be interrupted
     # when reading "fast" files like on-disk files. So the EINTR issue only
     # affects things like pipes, sockets, ttys etc. We treat "normal" (S_ISREG)
     # files approximately as "fast" files and use the fast (unsafe) code path,
     # to minimize the performance impact.
     if sys.version_info >= (2, 7, 4):
         # fp.readline deals with EINTR correctly, use it as a workaround.
         def _safeiterfile(fp):
             return iter(fp.readline, '')
     else:
         # fp.read* are broken too, manually deal with EINTR in a stupid way.
         # note: this may block longer than necessary because of bufsize.
         def _safeiterfile(fp, bufsize=4096):
             fd = fp.fileno()
             line = ''
             while True:
                 try:
                     buf = os.read(fd, bufsize)
                 except OSError as ex:
                     # os.read only raises EINTR before any data is read
                     if ex.errno == errno.EINTR:
                         continue
                     else:
                         raise
                 line += buf
                 if '\n' in buf:
                     splitted = line.splitlines(True)
                     line = ''
                     for l in splitted:
                         if l[-1] == '\n':
                             yield l
                         else:
                             line = l
                 if not buf:
                     break
             if line:
                 yield line
 
     def iterfile(fp):
         fastpath = True
         if type(fp) is file:
             fastpath = stat.S_ISREG(os.fstat(fp.fileno()).st_mode)
         if fastpath:
             return fp
         else:
             return _safeiterfile(fp)
 else:
     # PyPy and CPython 3 do not have the EINTR issue thus no workaround needed.
     def iterfile(fp):
         return fp
 
 def iterlines(iterator):
     for chunk in iterator:
         for line in chunk.splitlines():
             yield line
 
 def expandpath(path):
     return os.path.expanduser(os.path.expandvars(path))
 
 def hgcmd():
     """Return the command used to execute current hg
 
     This is different from hgexecutable() because on Windows we want
     to avoid things opening new shell windows like batch files, so we
     get either the python call or current executable.
     """
     if mainfrozen():
         if getattr(sys, 'frozen', None) == 'macosx_app':
             # Env variable set by py2app
             return [encoding.environ['EXECUTABLEPATH']]
         else:
             return [pycompat.sysexecutable]
     return gethgcmd()
 
 def rundetached(args, condfn):
     """Execute the argument list in a detached process.
 
     condfn is a callable which is called repeatedly and should return
     True once the child process is known to have started successfully.
     At this point, the child process PID is returned. If the child
     process fails to start or finishes before condfn() evaluates to
     True, return -1.
     """
     # Windows case is easier because the child process is either
     # successfully starting and validating the condition or exiting
     # on failure. We just poll on its PID. On Unix, if the child
     # process fails to start, it will be left in a zombie state until
     # the parent wait on it, which we cannot do since we expect a long
     # running process on success. Instead we listen for SIGCHLD telling
     # us our child process terminated.
     terminated = set()
     def handler(signum, frame):
         terminated.add(os.wait())
     prevhandler = None
     SIGCHLD = getattr(signal, 'SIGCHLD', None)
     if SIGCHLD is not None:
         prevhandler = signal.signal(SIGCHLD, handler)
     try:
         pid = spawndetached(args)
         while not condfn():
             if ((pid in terminated or not testpid(pid))
                 and not condfn()):
                 return -1
             time.sleep(0.1)
         return pid
     finally:
         if prevhandler is not None:
             signal.signal(signal.SIGCHLD, prevhandler)
 
 def interpolate(prefix, mapping, s, fn=None, escape_prefix=False):
     """Return the result of interpolating items in the mapping into string s.
 
     prefix is a single character string, or a two character string with
     a backslash as the first character if the prefix needs to be escaped in
     a regular expression.
 
     fn is an optional function that will be applied to the replacement text
     just before replacement.
 
     escape_prefix is an optional flag that allows using doubled prefix for
     its escaping.
     """
     fn = fn or (lambda s: s)
     patterns = '|'.join(mapping.keys())
     if escape_prefix:
         patterns += '|' + prefix
         if len(prefix) > 1:
             prefix_char = prefix[1:]
         else:
             prefix_char = prefix
         mapping[prefix_char] = prefix_char
     r = remod.compile(r'%s(%s)' % (prefix, patterns))
     return r.sub(lambda x: fn(mapping[x.group()[1:]]), s)
 
 def getport(port):
     """Return the port for a given network service.
 
     If port is an integer, it's returned as is. If it's a string, it's
     looked up using socket.getservbyname(). If there's no matching
     service, error.Abort is raised.
     """
     try:
         return int(port)
     except ValueError:
         pass
 
     try:
         return socket.getservbyname(port)
     except socket.error:
         raise Abort(_("no port number associated with service '%s'") % port)
 
 _booleans = {'1': True, 'yes': True, 'true': True, 'on': True, 'always': True,
              '0': False, 'no': False, 'false': False, 'off': False,
              'never': False}
 
 def parsebool(s):
     """Parse s into a boolean.
 
     If s is not a valid boolean, returns None.
     """
     return _booleans.get(s.lower(), None)
 
 _hextochr = dict((a + b, chr(int(a + b, 16)))
                  for a in string.hexdigits for b in string.hexdigits)
 
 class url(object):
     r"""Reliable URL parser.
 
     This parses URLs and provides attributes for the following
     components:
 
     <scheme>://<user>:<passwd>@<host>:<port>/<path>?<query>#<fragment>
 
     Missing components are set to None. The only exception is
     fragment, which is set to '' if present but empty.
 
     If parsefragment is False, fragment is included in query. If
     parsequery is False, query is included in path. If both are
     False, both fragment and query are included in path.
 
     See http://www.ietf.org/rfc/rfc2396.txt for more information.
 
     Note that for backward compatibility reasons, bundle URLs do not
     take host names. That means 'bundle://../' has a path of '../'.
 
     Examples:
 
     >>> url('http://www.ietf.org/rfc/rfc2396.txt')
     <url scheme: 'http', host: 'www.ietf.org', path: 'rfc/rfc2396.txt'>
     >>> url('ssh://[::1]:2200//home/joe/repo')
     <url scheme: 'ssh', host: '[::1]', port: '2200', path: '/home/joe/repo'>
     >>> url('file:///home/joe/repo')
     <url scheme: 'file', path: '/home/joe/repo'>
     >>> url('file:///c:/temp/foo/')
     <url scheme: 'file', path: 'c:/temp/foo/'>
     >>> url('bundle:foo')
     <url scheme: 'bundle', path: 'foo'>
     >>> url('bundle://../foo')
     <url scheme: 'bundle', path: '../foo'>
     >>> url(r'c:\foo\bar')
     <url path: 'c:\\foo\\bar'>
     >>> url(r'\\blah\blah\blah')
     <url path: '\\\\blah\\blah\\blah'>
     >>> url(r'\\blah\blah\blah#baz')
     <url path: '\\\\blah\\blah\\blah', fragment: 'baz'>
     >>> url(r'file:///C:\users\me')
     <url scheme: 'file', path: 'C:\\users\\me'>
 
     Authentication credentials:
 
     >>> url('ssh://joe:xyz@x/repo')
     <url scheme: 'ssh', user: 'joe', passwd: 'xyz', host: 'x', path: 'repo'>
     >>> url('ssh://joe@x/repo')
     <url scheme: 'ssh', user: 'joe', host: 'x', path: 'repo'>
 
     Query strings and fragments:
 
     >>> url('http://host/a?b#c')
     <url scheme: 'http', host: 'host', path: 'a', query: 'b', fragment: 'c'>
     >>> url('http://host/a?b#c', parsequery=False, parsefragment=False)
     <url scheme: 'http', host: 'host', path: 'a?b#c'>
 
     Empty path:
 
     >>> url('')
     <url path: ''>
     >>> url('#a')
     <url path: '', fragment: 'a'>
     >>> url('http://host/')
     <url scheme: 'http', host: 'host', path: ''>
     >>> url('http://host/#a')
     <url scheme: 'http', host: 'host', path: '', fragment: 'a'>
 
     Only scheme:
 
     >>> url('http:')
     <url scheme: 'http'>
     """
 
     _safechars = "!~*'()+"
     _safepchars = "/!~*'()+:\\"
     _matchscheme = remod.compile('^[a-zA-Z0-9+.\\-]+:').match
 
     def __init__(self, path, parsequery=True, parsefragment=True):
         # We slowly chomp away at path until we have only the path left
         self.scheme = self.user = self.passwd = self.host = None
         self.port = self.path = self.query = self.fragment = None
         self._localpath = True
         self._hostport = ''
         self._origpath = path
 
         if parsefragment and '#' in path:
             path, self.fragment = path.split('#', 1)
 
         # special case for Windows drive letters and UNC paths
         if hasdriveletter(path) or path.startswith('\\\\'):
             self.path = path
             return
 
         # For compatibility reasons, we can't handle bundle paths as
         # normal URLS
         if path.startswith('bundle:'):
             self.scheme = 'bundle'
             path = path[7:]
             if path.startswith('//'):
                 path = path[2:]
             self.path = path
             return
 
         if self._matchscheme(path):
             parts = path.split(':', 1)
             if parts[0]:
                 self.scheme, path = parts
                 self._localpath = False
 
         if not path:
             path = None
             if self._localpath:
                 self.path = ''
                 return
         else:
             if self._localpath:
                 self.path = path
                 return
 
             if parsequery and '?' in path:
                 path, self.query = path.split('?', 1)
                 if not path:
                     path = None
                 if not self.query:
                     self.query = None
 
             # // is required to specify a host/authority
             if path and path.startswith('//'):
                 parts = path[2:].split('/', 1)
                 if len(parts) > 1:
                     self.host, path = parts
                 else:
                     self.host = parts[0]
                     path = None
                 if not self.host:
                     self.host = None
                     # path of file:///d is /d
                     # path of file:///d:/ is d:/, not /d:/
                     if path and not hasdriveletter(path):
                         path = '/' + path
 
             if self.host and '@' in self.host:
                 self.user, self.host = self.host.rsplit('@', 1)
                 if ':' in self.user:
                     self.user, self.passwd = self.user.split(':', 1)
                 if not self.host:
                     self.host = None
 
             # Don't split on colons in IPv6 addresses without ports
             if (self.host and ':' in self.host and
                 not (self.host.startswith('[') and self.host.endswith(']'))):
                 self._hostport = self.host
                 self.host, self.port = self.host.rsplit(':', 1)
                 if not self.host:
                     self.host = None
 
             if (self.host and self.scheme == 'file' and
                 self.host not in ('localhost', '127.0.0.1', '[::1]')):
                 raise Abort(_('file:// URLs can only refer to localhost'))
 
         self.path = path
 
         # leave the query string escaped
         for a in ('user', 'passwd', 'host', 'port',
                   'path', 'fragment'):
             v = getattr(self, a)
             if v is not None:
                 setattr(self, a, urlreq.unquote(v))
 
     def __repr__(self):
         attrs = []
         for a in ('scheme', 'user', 'passwd', 'host', 'port', 'path',
                   'query', 'fragment'):
             v = getattr(self, a)
             if v is not None:
                 attrs.append('%s: %r' % (a, v))
         return '<url %s>' % ', '.join(attrs)
 
     def __bytes__(self):
         r"""Join the URL's components back into a URL string.
 
         Examples:
 
         >>> str(url('http://user:pw@host:80/c:/bob?fo:oo#ba:ar'))
         'http://user:pw@host:80/c:/bob?fo:oo#ba:ar'
         >>> str(url('http://user:pw@host:80/?foo=bar&baz=42'))
         'http://user:pw@host:80/?foo=bar&baz=42'
         >>> str(url('http://user:pw@host:80/?foo=bar%3dbaz'))
         'http://user:pw@host:80/?foo=bar%3dbaz'
         >>> str(url('ssh://user:pw@[::1]:2200//home/joe#'))
         'ssh://user:pw@[::1]:2200//home/joe#'
         >>> str(url('http://localhost:80//'))
         'http://localhost:80//'
         >>> str(url('http://localhost:80/'))
         'http://localhost:80/'
         >>> str(url('http://localhost:80'))
         'http://localhost:80/'
         >>> str(url('bundle:foo'))
         'bundle:foo'
         >>> str(url('bundle://../foo'))
         'bundle:../foo'
         >>> str(url('path'))
         'path'
         >>> str(url('file:///tmp/foo/bar'))
         'file:///tmp/foo/bar'
         >>> str(url('file:///c:/tmp/foo/bar'))
         'file:///c:/tmp/foo/bar'
         >>> print url(r'bundle:foo\bar')
         bundle:foo\bar
         >>> print url(r'file:///D:\data\hg')
         file:///D:\data\hg
         """
         if self._localpath:
             s = self.path
             if self.scheme == 'bundle':
                 s = 'bundle:' + s
             if self.fragment:
                 s += '#' + self.fragment
             return s
 
         s = self.scheme + ':'
         if self.user or self.passwd or self.host:
             s += '//'
         elif self.scheme and (not self.path or self.path.startswith('/')
                               or hasdriveletter(self.path)):
             s += '//'
             if hasdriveletter(self.path):
                 s += '/'
         if self.user:
             s += urlreq.quote(self.user, safe=self._safechars)
         if self.passwd:
             s += ':' + urlreq.quote(self.passwd, safe=self._safechars)
         if self.user or self.passwd:
             s += '@'
         if self.host:
             if not (self.host.startswith('[') and self.host.endswith(']')):
                 s += urlreq.quote(self.host)
             else:
                 s += self.host
         if self.port:
             s += ':' + urlreq.quote(self.port)
         if self.host:
             s += '/'
         if self.path:
             # TODO: similar to the query string, we should not unescape the
             # path when we store it, the path might contain '%2f' = '/',
             # which we should *not* escape.
             s += urlreq.quote(self.path, safe=self._safepchars)
         if self.query:
             # we store the query in escaped form.
             s += '?' + self.query
         if self.fragment is not None:
             s += '#' + urlreq.quote(self.fragment, safe=self._safepchars)
         return s
 
     __str__ = encoding.strmethod(__bytes__)
 
     def authinfo(self):
         user, passwd = self.user, self.passwd
         try:
             self.user, self.passwd = None, None
             s = bytes(self)
         finally:
             self.user, self.passwd = user, passwd
         if not self.user:
             return (s, None)
         # authinfo[1] is passed to urllib2 password manager, and its
         # URIs must not contain credentials. The host is passed in the
         # URIs list because Python < 2.4.3 uses only that to search for
         # a password.
         return (s, (None, (s, self.host),
                     self.user, self.passwd or ''))
 
     def isabs(self):
         if self.scheme and self.scheme != 'file':
             return True # remote URL
         if hasdriveletter(self.path):
             return True # absolute for our purposes - can't be joined()
         if self.path.startswith(br'\\'):
             return True # Windows UNC path
         if self.path.startswith('/'):
             return True # POSIX-style
         return False
 
     def localpath(self):
         if self.scheme == 'file' or self.scheme == 'bundle':
             path = self.path or '/'
             # For Windows, we need to promote hosts containing drive
             # letters to paths with drive letters.
             if hasdriveletter(self._hostport):
                 path = self._hostport + '/' + self.path
             elif (self.host is not None and self.path
                   and not hasdriveletter(path)):
                 path = '/' + path
             return path
         return self._origpath
 
     def islocal(self):
         '''whether localpath will return something that posixfile can open'''
         return (not self.scheme or self.scheme == 'file'
                 or self.scheme == 'bundle')
 
 def hasscheme(path):
     return bool(url(path).scheme)
 
 def hasdriveletter(path):
     return path and path[1:2] == ':' and path[0:1].isalpha()
 
 def urllocalpath(path):
     return url(path, parsequery=False, parsefragment=False).localpath()
 
 def hidepassword(u):
     '''hide user credential in a url string'''
     u = url(u)
     if u.passwd:
         u.passwd = '***'
     return bytes(u)
 
 def removeauth(u):
     '''remove all authentication information from a url string'''
     u = url(u)
     u.user = u.passwd = None
     return str(u)
 
 timecount = unitcountfn(
     (1, 1e3, _('%.0f s')),
     (100, 1, _('%.1f s')),
     (10, 1, _('%.2f s')),
     (1, 1, _('%.3f s')),
     (100, 0.001, _('%.1f ms')),
     (10, 0.001, _('%.2f ms')),
     (1, 0.001, _('%.3f ms')),
     (100, 0.000001, _('%.1f us')),
     (10, 0.000001, _('%.2f us')),
     (1, 0.000001, _('%.3f us')),
     (100, 0.000000001, _('%.1f ns')),
     (10, 0.000000001, _('%.2f ns')),
     (1, 0.000000001, _('%.3f ns')),
     )
 
 _timenesting = [0]
 
 def timed(func):
     '''Report the execution time of a function call to stderr.
 
     During development, use as a decorator when you need to measure
     the cost of a function, e.g. as follows:
 
     @util.timed
     def foo(a, b, c):
         pass
     '''
 
     def wrapper(*args, **kwargs):
         start = timer()
         indent = 2
         _timenesting[0] += indent
         try:
             return func(*args, **kwargs)
         finally:
             elapsed = timer() - start
             _timenesting[0] -= indent
             stderr.write('%s%s: %s\n' %
                          (' ' * _timenesting[0], func.__name__,
                           timecount(elapsed)))
     return wrapper
 
 _sizeunits = (('m', 2**20), ('k', 2**10), ('g', 2**30),
               ('kb', 2**10), ('mb', 2**20), ('gb', 2**30), ('b', 1))
 
 def sizetoint(s):
     '''Convert a space specifier to a byte count.
 
     >>> sizetoint('30')
     30
     >>> sizetoint('2.2kb')
     2252
     >>> sizetoint('6M')
     6291456
     '''
     t = s.strip().lower()
     try:
         for k, u in _sizeunits:
             if t.endswith(k):
                 return int(float(t[:-len(k)]) * u)
         return int(t)
     except ValueError:
         raise error.ParseError(_("couldn't parse size: %s") % s)
 
 class hooks(object):
     '''A collection of hook functions that can be used to extend a
     function's behavior. Hooks are called in lexicographic order,
     based on the names of their sources.'''
 
     def __init__(self):
         self._hooks = []
 
     def add(self, source, hook):
         self._hooks.append((source, hook))
 
     def __call__(self, *args):
         self._hooks.sort(key=lambda x: x[0])
         results = []
         for source, hook in self._hooks:
             results.append(hook(*args))
         return results
 
 def getstackframes(skip=0, line=' %-*s in %s\n', fileline='%s:%s', depth=0):
     '''Yields lines for a nicely formatted stacktrace.
     Skips the 'skip' last entries, then return the last 'depth' entries.
     Each file+linenumber is formatted according to fileline.
     Each line is formatted according to line.
     If line is None, it yields:
       length of longest filepath+line number,
       filepath+linenumber,
       function
 
     Not be used in production code but very convenient while developing.
     '''
     entries = [(fileline % (fn, ln), func)
         for fn, ln, func, _text in traceback.extract_stack()[:-skip - 1]
         ][-depth:]
     if entries:
         fnmax = max(len(entry[0]) for entry in entries)
         for fnln, func in entries:
             if line is None:
                 yield (fnmax, fnln, func)
             else:
                 yield line % (fnmax, fnln, func)
 
 def debugstacktrace(msg='stacktrace', skip=0,
                     f=stderr, otherf=stdout, depth=0):
     '''Writes a message to f (stderr) with a nicely formatted stacktrace.
     Skips the 'skip' entries closest to the call, then show 'depth' entries.
     By default it will flush stdout first.
     It can be used everywhere and intentionally does not require an ui object.
     Not be used in production code but very convenient while developing.
     '''
     if otherf:
         otherf.flush()
     f.write('%s at:\n' % msg.rstrip())
     for line in getstackframes(skip + 1, depth=depth):
         f.write(line)
     f.flush()
 
 class dirs(object):
     '''a multiset of directory names from a dirstate or manifest'''
 
     def __init__(self, map, skip=None):
         self._dirs = {}
         addpath = self.addpath
         if safehasattr(map, 'iteritems') and skip is not None:
             for f, s in map.iteritems():
                 if s[0] != skip:
                     addpath(f)
         else:
             for f in map:
                 addpath(f)
 
     def addpath(self, path):
         dirs = self._dirs
         for base in finddirs(path):
             if base in dirs:
                 dirs[base] += 1
                 return
             dirs[base] = 1
 
     def delpath(self, path):
         dirs = self._dirs
         for base in finddirs(path):
             if dirs[base] > 1:
                 dirs[base] -= 1
                 return
             del dirs[base]
 
     def __iter__(self):
         return iter(self._dirs)
 
     def __contains__(self, d):
         return d in self._dirs
 
 if safehasattr(parsers, 'dirs'):
     dirs = parsers.dirs
 
 def finddirs(path):
     pos = path.rfind('/')
     while pos != -1:
         yield path[:pos]
         pos = path.rfind('/', 0, pos)
 
 # compression code
 
 SERVERROLE = 'server'
 CLIENTROLE = 'client'
 
 compewireprotosupport = collections.namedtuple(u'compenginewireprotosupport',
                                                (u'name', u'serverpriority',
                                                 u'clientpriority'))
 
 class compressormanager(object):
     """Holds registrations of various compression engines.
 
     This class essentially abstracts the differences between compression
     engines to allow new compression formats to be added easily, possibly from
     extensions.
 
     Compressors are registered against the global instance by calling its
     ``register()`` method.
     """
     def __init__(self):
         self._engines = {}
         # Bundle spec human name to engine name.
         self._bundlenames = {}
         # Internal bundle identifier to engine name.
         self._bundletypes = {}
         # Revlog header to engine name.
         self._revlogheaders = {}
         # Wire proto identifier to engine name.
         self._wiretypes = {}
 
     def __getitem__(self, key):
         return self._engines[key]
 
     def __contains__(self, key):
         return key in self._engines
 
     def __iter__(self):
         return iter(self._engines.keys())
 
     def register(self, engine):
         """Register a compression engine with the manager.
 
         The argument must be a ``compressionengine`` instance.
         """
         if not isinstance(engine, compressionengine):
             raise ValueError(_('argument must be a compressionengine'))
 
         name = engine.name()
 
         if name in self._engines:
             raise error.Abort(_('compression engine %s already registered') %
                               name)
 
         bundleinfo = engine.bundletype()
         if bundleinfo:
             bundlename, bundletype = bundleinfo
 
             if bundlename in self._bundlenames:
                 raise error.Abort(_('bundle name %s already registered') %
                                   bundlename)
             if bundletype in self._bundletypes:
                 raise error.Abort(_('bundle type %s already registered by %s') %
                                   (bundletype, self._bundletypes[bundletype]))
 
             # No external facing name declared.
             if bundlename:
                 self._bundlenames[bundlename] = name
 
             self._bundletypes[bundletype] = name
 
         wiresupport = engine.wireprotosupport()
         if wiresupport:
             wiretype = wiresupport.name
             if wiretype in self._wiretypes:
                 raise error.Abort(_('wire protocol compression %s already '
                                     'registered by %s') %
                                   (wiretype, self._wiretypes[wiretype]))
 
             self._wiretypes[wiretype] = name
 
         revlogheader = engine.revlogheader()
         if revlogheader and revlogheader in self._revlogheaders:
             raise error.Abort(_('revlog header %s already registered by %s') %
                               (revlogheader, self._revlogheaders[revlogheader]))
 
         if revlogheader:
             self._revlogheaders[revlogheader] = name
 
         self._engines[name] = engine
 
     @property
     def supportedbundlenames(self):
         return set(self._bundlenames.keys())
 
     @property
     def supportedbundletypes(self):
         return set(self._bundletypes.keys())
 
     def forbundlename(self, bundlename):
         """Obtain a compression engine registered to a bundle name.
 
         Will raise KeyError if the bundle type isn't registered.
 
         Will abort if the engine is known but not available.
         """
         engine = self._engines[self._bundlenames[bundlename]]
         if not engine.available():
             raise error.Abort(_('compression engine %s could not be loaded') %
                               engine.name())
         return engine
 
     def forbundletype(self, bundletype):
         """Obtain a compression engine registered to a bundle type.
 
         Will raise KeyError if the bundle type isn't registered.
 
         Will abort if the engine is known but not available.
         """
         engine = self._engines[self._bundletypes[bundletype]]
         if not engine.available():
             raise error.Abort(_('compression engine %s could not be loaded') %
                               engine.name())
         return engine
 
     def supportedwireengines(self, role, onlyavailable=True):
         """Obtain compression engines that support the wire protocol.
 
         Returns a list of engines in prioritized order, most desired first.
 
         If ``onlyavailable`` is set, filter out engines that can't be
         loaded.
         """
         assert role in (SERVERROLE, CLIENTROLE)
 
         attr = 'serverpriority' if role == SERVERROLE else 'clientpriority'
 
         engines = [self._engines[e] for e in self._wiretypes.values()]
         if onlyavailable:
             engines = [e for e in engines if e.available()]
 
         def getkey(e):
             # Sort first by priority, highest first. In case of tie, sort
             # alphabetically. This is arbitrary, but ensures output is
             # stable.
             w = e.wireprotosupport()
             return -1 * getattr(w, attr), w.name
 
         return list(sorted(engines, key=getkey))
 
     def forwiretype(self, wiretype):
         engine = self._engines[self._wiretypes[wiretype]]
         if not engine.available():
             raise error.Abort(_('compression engine %s could not be loaded') %
                               engine.name())
         return engine
 
     def forrevlogheader(self, header):
         """Obtain a compression engine registered to a revlog header.
 
         Will raise KeyError if the revlog header value isn't registered.
         """
         return self._engines[self._revlogheaders[header]]
 
 compengines = compressormanager()
 
 class compressionengine(object):
     """Base class for compression engines.
 
     Compression engines must implement the interface defined by this class.
     """
     def name(self):
         """Returns the name of the compression engine.
 
         This is the key the engine is registered under.
 
         This method must be implemented.
         """
         raise NotImplementedError()
 
     def available(self):
         """Whether the compression engine is available.
 
         The intent of this method is to allow optional compression engines
         that may not be available in all installations (such as engines relying
         on C extensions that may not be present).
         """
         return True
 
     def bundletype(self):
         """Describes bundle identifiers for this engine.
 
         If this compression engine isn't supported for bundles, returns None.
 
         If this engine can be used for bundles, returns a 2-tuple of strings of
         the user-facing "bundle spec" compression name and an internal
         identifier used to denote the compression format within bundles. To
         exclude the name from external usage, set the first element to ``None``.
 
         If bundle compression is supported, the class must also implement
         ``compressstream`` and `decompressorreader``.
 
         The docstring of this method is used in the help system to tell users
         about this engine.
         """
         return None
 
     def wireprotosupport(self):
         """Declare support for this compression format on the wire protocol.
 
         If this compression engine isn't supported for compressing wire
         protocol payloads, returns None.
 
         Otherwise, returns ``compenginewireprotosupport`` with the following
         fields:
 
         * String format identifier
         * Integer priority for the server
         * Integer priority for the client
 
         The integer priorities are used to order the advertisement of format
         support by server and client. The highest integer is advertised
         first. Integers with non-positive values aren't advertised.
 
         The priority values are somewhat arbitrary and only used for default
         ordering. The relative order can be changed via config options.
 
         If wire protocol compression is supported, the class must also implement
         ``compressstream`` and ``decompressorreader``.
         """
         return None
 
     def revlogheader(self):
         """Header added to revlog chunks that identifies this engine.
 
         If this engine can be used to compress revlogs, this method should
         return the bytes used to identify chunks compressed with this engine.
         Else, the method should return ``None`` to indicate it does not
         participate in revlog compression.
         """
         return None
 
     def compressstream(self, it, opts=None):
         """Compress an iterator of chunks.
 
         The method receives an iterator (ideally a generator) of chunks of
         bytes to be compressed. It returns an iterator (ideally a generator)
         of bytes of chunks representing the compressed output.
 
         Optionally accepts an argument defining how to perform compression.
         Each engine treats this argument differently.
         """
         raise NotImplementedError()
 
     def decompressorreader(self, fh):
         """Perform decompression on a file object.
 
         Argument is an object with a ``read(size)`` method that returns
         compressed data. Return value is an object with a ``read(size)`` that
         returns uncompressed data.
         """
         raise NotImplementedError()
 
     def revlogcompressor(self, opts=None):
         """Obtain an object that can be used to compress revlog entries.
 
         The object has a ``compress(data)`` method that compresses binary
         data. This method returns compressed binary data or ``None`` if
         the data could not be compressed (too small, not compressible, etc).
         The returned data should have a header uniquely identifying this
         compression format so decompression can be routed to this engine.
         This header should be identified by the ``revlogheader()`` return
         value.
 
         The object has a ``decompress(data)`` method that decompresses
         data. The method will only be called if ``data`` begins with
         ``revlogheader()``. The method should return the raw, uncompressed
         data or raise a ``RevlogError``.
 
         The object is reusable but is not thread safe.
         """
         raise NotImplementedError()
 
 class _zlibengine(compressionengine):
     def name(self):
         return 'zlib'
 
     def bundletype(self):
         """zlib compression using the DEFLATE algorithm.
 
         All Mercurial clients should support this format. The compression
         algorithm strikes a reasonable balance between compression ratio
         and size.
         """
         return 'gzip', 'GZ'
 
     def wireprotosupport(self):
         return compewireprotosupport('zlib', 20, 20)
 
     def revlogheader(self):
         return 'x'
 
     def compressstream(self, it, opts=None):
         opts = opts or {}
 
         z = zlib.compressobj(opts.get('level', -1))
         for chunk in it:
             data = z.compress(chunk)
             # Not all calls to compress emit data. It is cheaper to inspect
             # here than to feed empty chunks through generator.
             if data:
                 yield data
 
         yield z.flush()
 
     def decompressorreader(self, fh):
         def gen():
             d = zlib.decompressobj()
             for chunk in filechunkiter(fh):
                 while chunk:
                     # Limit output size to limit memory.
                     yield d.decompress(chunk, 2 ** 18)
                     chunk = d.unconsumed_tail
 
         return chunkbuffer(gen())
 
     class zlibrevlogcompressor(object):
         def compress(self, data):
             insize = len(data)
             # Caller handles empty input case.
             assert insize > 0
 
             if insize < 44:
                 return None
 
             elif insize <= 1000000:
                 compressed = zlib.compress(data)
                 if len(compressed) < insize:
                     return compressed
                 return None
 
             # zlib makes an internal copy of the input buffer, doubling
             # memory usage for large inputs. So do streaming compression
             # on large inputs.
             else:
                 z = zlib.compressobj()
                 parts = []
                 pos = 0
                 while pos < insize:
                     pos2 = pos + 2**20
                     parts.append(z.compress(data[pos:pos2]))
                     pos = pos2
                 parts.append(z.flush())
 
                 if sum(map(len, parts)) < insize:
                     return ''.join(parts)
                 return None
 
         def decompress(self, data):
             try:
                 return zlib.decompress(data)
             except zlib.error as e:
                 raise error.RevlogError(_('revlog decompress error: %s') %
                                         str(e))
 
     def revlogcompressor(self, opts=None):
         return self.zlibrevlogcompressor()
 
 compengines.register(_zlibengine())
 
 class _bz2engine(compressionengine):
     def name(self):
         return 'bz2'
 
     def bundletype(self):
         """An algorithm that produces smaller bundles than ``gzip``.
 
         All Mercurial clients should support this format.
 
         This engine will likely produce smaller bundles than ``gzip`` but
         will be significantly slower, both during compression and
         decompression.
 
         If available, the ``zstd`` engine can yield similar or better
         compression at much higher speeds.
         """
         return 'bzip2', 'BZ'
 
     # We declare a protocol name but don't advertise by default because
     # it is slow.
     def wireprotosupport(self):
         return compewireprotosupport('bzip2', 0, 0)
 
     def compressstream(self, it, opts=None):
         opts = opts or {}
         z = bz2.BZ2Compressor(opts.get('level', 9))
         for chunk in it:
             data = z.compress(chunk)
             if data:
                 yield data
 
         yield z.flush()
 
     def decompressorreader(self, fh):
         def gen():
             d = bz2.BZ2Decompressor()
             for chunk in filechunkiter(fh):
                 yield d.decompress(chunk)
 
         return chunkbuffer(gen())
 
 compengines.register(_bz2engine())
 
 class _truncatedbz2engine(compressionengine):
     def name(self):
         return 'bz2truncated'
 
     def bundletype(self):
         return None, '_truncatedBZ'
 
     # We don't implement compressstream because it is hackily handled elsewhere.
 
     def decompressorreader(self, fh):
         def gen():
             # The input stream doesn't have the 'BZ' header. So add it back.
             d = bz2.BZ2Decompressor()
             d.decompress('BZ')
             for chunk in filechunkiter(fh):
                 yield d.decompress(chunk)
 
         return chunkbuffer(gen())
 
 compengines.register(_truncatedbz2engine())
 
 class _noopengine(compressionengine):
     def name(self):
         return 'none'
 
     def bundletype(self):
         """No compression is performed.
 
         Use this compression engine to explicitly disable compression.
         """
         return 'none', 'UN'
 
     # Clients always support uncompressed payloads. Servers don't because
     # unless you are on a fast network, uncompressed payloads can easily
     # saturate your network pipe.
     def wireprotosupport(self):
         return compewireprotosupport('none', 0, 10)
 
     # We don't implement revlogheader because it is handled specially
     # in the revlog class.
 
     def compressstream(self, it, opts=None):
         return it
 
     def decompressorreader(self, fh):
         return fh
 
     class nooprevlogcompressor(object):
         def compress(self, data):
             return None
 
     def revlogcompressor(self, opts=None):
         return self.nooprevlogcompressor()
 
 compengines.register(_noopengine())
 
 class _zstdengine(compressionengine):
     def name(self):
         return 'zstd'
 
     @propertycache
     def _module(self):
         # Not all installs have the zstd module available. So defer importing
         # until first access.
         try:
             from . import zstd
             # Force delayed import.
             zstd.__version__
             return zstd
         except ImportError:
             return None
 
     def available(self):
         return bool(self._module)
 
     def bundletype(self):
         """A modern compression algorithm that is fast and highly flexible.
 
         Only supported by Mercurial 4.1 and newer clients.
 
         With the default settings, zstd compression is both faster and yields
         better compression than ``gzip``. It also frequently yields better
         compression than ``bzip2`` while operating at much higher speeds.
 
         If this engine is available and backwards compatibility is not a
         concern, it is likely the best available engine.
         """
         return 'zstd', 'ZS'
 
     def wireprotosupport(self):
         return compewireprotosupport('zstd', 50, 50)
 
     def revlogheader(self):
         return '\x28'
 
     def compressstream(self, it, opts=None):
         opts = opts or {}
         # zstd level 3 is almost always significantly faster than zlib
         # while providing no worse compression. It strikes a good balance
         # between speed and compression.
         level = opts.get('level', 3)
 
         zstd = self._module
         z = zstd.ZstdCompressor(level=level).compressobj()
         for chunk in it:
             data = z.compress(chunk)
             if data:
                 yield data
 
         yield z.flush()
 
     def decompressorreader(self, fh):
         zstd = self._module
         dctx = zstd.ZstdDecompressor()
         return chunkbuffer(dctx.read_from(fh))
 
     class zstdrevlogcompressor(object):
         def __init__(self, zstd, level=3):
             # Writing the content size adds a few bytes to the output. However,
             # it allows decompression to be more optimal since we can
             # pre-allocate a buffer to hold the result.
             self._cctx = zstd.ZstdCompressor(level=level,
                                              write_content_size=True)
             self._dctx = zstd.ZstdDecompressor()
             self._compinsize = zstd.COMPRESSION_RECOMMENDED_INPUT_SIZE
             self._decompinsize = zstd.DECOMPRESSION_RECOMMENDED_INPUT_SIZE
 
         def compress(self, data):
             insize = len(data)
             # Caller handles empty input case.
             assert insize > 0
 
             if insize < 50:
                 return None
 
             elif insize <= 1000000:
                 compressed = self._cctx.compress(data)
                 if len(compressed) < insize:
                     return compressed
                 return None
             else:
                 z = self._cctx.compressobj()
                 chunks = []
                 pos = 0
                 while pos < insize:
                     pos2 = pos + self._compinsize
                     chunk = z.compress(data[pos:pos2])
                     if chunk:
                         chunks.append(chunk)
                     pos = pos2
                 chunks.append(z.flush())
 
                 if sum(map(len, chunks)) < insize:
                     return ''.join(chunks)
                 return None
 
         def decompress(self, data):
             insize = len(data)
 
             try:
                 # This was measured to be faster than other streaming
                 # decompressors.
                 dobj = self._dctx.decompressobj()
                 chunks = []
                 pos = 0
                 while pos < insize:
                     pos2 = pos + self._decompinsize
                     chunk = dobj.decompress(data[pos:pos2])
                     if chunk:
                         chunks.append(chunk)
                     pos = pos2
                 # Frame should be exhausted, so no finish() API.
 
                 return ''.join(chunks)
             except Exception as e:
                 raise error.RevlogError(_('revlog decompress error: %s') %
                                         str(e))
 
     def revlogcompressor(self, opts=None):
         opts = opts or {}
         return self.zstdrevlogcompressor(self._module,
                                          level=opts.get('level', 3))
 
 compengines.register(_zstdengine())
 
 def bundlecompressiontopics():
     """Obtains a list of available bundle compressions for use in help."""
     # help.makeitemsdocs() expects a dict of names to items with a .__doc__.
     items = {}
 
     # We need to format the docstring. So use a dummy object/type to hold it
     # rather than mutating the original.
     class docobject(object):
         pass
 
     for name in compengines:
         engine = compengines[name]
 
         if not engine.available():
             continue
 
         bt = engine.bundletype()
         if not bt or not bt[0]:
             continue
 
         doc = pycompat.sysstr('``%s``\n    %s') % (
             bt[0], engine.bundletype.__doc__)
 
         value = docobject()
         value.__doc__ = doc
 
         items[bt[0]] = value
 
     return items
 
 # convenient shortcut
 dst = debugstacktrace

tests/test-rebase-base.t

@@ -1,381 +1,418 b''
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > rebase=
   > drawdag=$TESTDIR/drawdag.py
   > 
   > [phases]
   > publish=False
   > 
   > [alias]
   > tglog = log -G --template "{rev}: {desc}"
   > EOF
 
   $ rebasewithdag() {
   >   N=`$PYTHON -c "print($N+1)"`
   >   hg init repo$N && cd repo$N
   >   hg debugdrawdag
   >   hg rebase "$@" > _rebasetmp
   >   r=$?
   >   grep -v 'saved backup bundle' _rebasetmp
   >   [ $r -eq 0 ] && hg tglog
   >   cd ..
   >   return $r
   > }
 
 Single branching point, without merge:
 
   $ rebasewithdag -b D -d Z <<'EOS'
   >     D E
   >     |/
   > Z B C   # C: branching point, E should be picked
   >  \|/    # B should not be picked
   >   A
   >   |
   >   R
   > EOS
   rebasing 3:d6003a550c2c "C" (C)
   rebasing 5:4526cf523425 "D" (D)
   rebasing 6:b296604d9846 "E" (E tip)
   o  6: E
   |
   | o  5: D
   |/
   o  4: C
   |
   o  3: Z
   |
   | o  2: B
   |/
   o  1: A
   |
   o  0: R
   
 Multiple branching points caused by selecting a single merge changeset:
 
   $ rebasewithdag -b E -d Z <<'EOS'
   >     E
   >    /|
   >   B C D  # B, C: multiple branching points
   >   | |/   # D should not be picked
   > Z | /
   >  \|/
   >   A
   >   |
   >   R
   > EOS
   rebasing 2:c1e6b162678d "B" (B)
   rebasing 3:d6003a550c2c "C" (C)
   rebasing 6:54c8f00cb91c "E" (E tip)
   o    6: E
   |\
   | o  5: C
   | |
   o |  4: B
   |/
   o  3: Z
   |
   | o  2: D
   |/
   o  1: A
   |
   o  0: R
   
 Rebase should not extend the "--base" revset using "descendants":
 
   $ rebasewithdag -b B -d Z <<'EOS'
   >     E
   >    /|
   > Z B C  # descendants(B) = B+E. With E, C will be included incorrectly
   >  \|/
   >   A
   >   |
   >   R
   > EOS
   rebasing 2:c1e6b162678d "B" (B)
   rebasing 5:54c8f00cb91c "E" (E tip)
   o    5: E
   |\
   | o  4: B
   | |
   | o  3: Z
   | |
   o |  2: C
   |/
   o  1: A
   |
   o  0: R
   
 Rebase should not simplify the "--base" revset using "roots":
 
   $ rebasewithdag -b B+E -d Z <<'EOS'
   >     E
   >    /|
   > Z B C  # roots(B+E) = B. Without E, C will be missed incorrectly
   >  \|/
   >   A
   >   |
   >   R
   > EOS
   rebasing 2:c1e6b162678d "B" (B)
   rebasing 3:d6003a550c2c "C" (C)
   rebasing 5:54c8f00cb91c "E" (E tip)
   o    5: E
   |\
   | o  4: C
   | |
   o |  3: B
   |/
   o  2: Z
   |
   o  1: A
   |
   o  0: R
   
 The destination is one of the two branching points of a merge:
 
   $ rebasewithdag -b F -d Z <<'EOS'
   >     F
   >    / \
   >   E   D
   >  /   /
   > Z   C
   >  \ /
   >   B
   >   |
   >   A
   > EOS
   nothing to rebase
   [1]
 
 Multiple branching points caused by multiple bases (issue5420):
 
   $ rebasewithdag -b E1+E2+C2+B1 -d Z <<'EOS'
   >   Z    E2
   >   |   /
   >   F E1 C2
   >   |/  /
   >   E C1 B2
   >   |/  /
   >   C B1
   >   |/
   >   B
   >   |
   >   A
   >   |
   >   R
   > EOS
   rebasing 3:a113dbaa660a "B1" (B1)
   rebasing 5:06ce7b1cc8c2 "B2" (B2)
   rebasing 6:0ac98cce32d3 "C1" (C1)
   rebasing 8:781512f5e33d "C2" (C2)
   rebasing 9:428d8c18f641 "E1" (E1)
   rebasing 11:e1bf82f6b6df "E2" (E2)
   o  12: E2
   |
   o  11: E1
   |
   | o  10: C2
   | |
   | o  9: C1
   |/
   | o  8: B2
   | |
   | o  7: B1
   |/
   o  6: Z
   |
   o  5: F
   |
   o  4: E
   |
   o  3: C
   |
   o  2: B
   |
   o  1: A
   |
   o  0: R
   
 Multiple branching points with multiple merges:
 
   $ rebasewithdag -b G+P -d Z <<'EOS'
   > G   H   P
   > |\ /|   |\
   > F E D   M N
   >  \|/|  /| |\
   > Z C B I J K L
   >  \|/  |/  |/
   >   A   A   A
   > EOS
   rebasing 2:dc0947a82db8 "C" (C)
   rebasing 8:4e4f9194f9f1 "D" (D)
   rebasing 9:03ca77807e91 "E" (E)
   rebasing 10:afc707c82df0 "F" (F)
   rebasing 13:690dfff91e9e "G" (G)
   rebasing 14:2893b886bb10 "H" (H)
   rebasing 3:08ebfeb61bac "I" (I)
   rebasing 4:a0a5005cec67 "J" (J)
   rebasing 5:83780307a7e8 "K" (K)
   rebasing 6:e131637a1cb6 "L" (L)
   rebasing 11:d1f6d0c3c7e4 "M" (M)
   rebasing 12:7aaec6f81888 "N" (N)
   rebasing 15:325bc8f1760d "P" (P tip)
   o    15: P
   |\
   | o    14: N
   | |\
   o \ \    13: M
   |\ \ \
   | | | o  12: L
   | | | |
   | | o |  11: K
   | | |/
   | o /  10: J
   | |/
   o /  9: I
   |/
   | o    8: H
   | |\
   | | | o  7: G
   | | |/|
   | | | o  6: F
   | | | |
   | | o |  5: E
   | | |/
   | o |  4: D
   | |\|
   +---o  3: C
   | |
   o |  2: Z
   | |
   | o  1: B
   |/
   o  0: A
   
 Slightly more complex merge case (mentioned in https://www.mercurial-scm.org/pipermail/mercurial-devel/2016-November/091074.html):
 
   $ rebasewithdag -b A3+B3 -d Z <<'EOF'
   > Z     C1    A3     B3
   > |    /     / \    / \
   > M3 C0     A1  A2 B1  B2
   > | /       |   |  |   |
   > M2        M1  C1 C1  M3
   > |
   > M1
   > |
   > M0
   > EOF
   rebasing 4:8817fae53c94 "C0" (C0)
   rebasing 6:06ca5dfe3b5b "B2" (B2)
   rebasing 7:73508237b032 "C1" (C1)
   rebasing 9:fdb955e2faed "A2" (A2)
   rebasing 11:4e449bd1a643 "A3" (A3)
   rebasing 10:0a33b0519128 "B1" (B1)
   rebasing 12:209327807c3a "B3" (B3 tip)
   o    12: B3
   |\
   | o  11: B1
   | |
   | | o    10: A3
   | | |\
   | +---o  9: A2
   | | |
   | o |  8: C1
   | | |
   o | |  7: B2
   | | |
   | o |  6: C0
   |/ /
   o |  5: Z
   | |
   o |  4: M3
   | |
   o |  3: M2
   | |
   | o  2: A1
   |/
   o  1: M1
   |
   o  0: M0
   
 Disconnected graph:
 
   $ rebasewithdag -b B -d Z <<'EOS'
   >   B
   >   |
   > Z A
   > EOS
   nothing to rebase from 112478962961 to 48b9aae0607f
   [1]
 
 Multiple roots. Roots are ancestors of dest:
 
   $ rebasewithdag -b B+D -d Z <<'EOF'
   > D Z B
   >  \|\|
   >   C A
   > EOF
   rebasing 2:112478962961 "B" (B)
   rebasing 3:b70f76719894 "D" (D)
   o  4: D
   |
   | o  3: B
   |/
   o    2: Z
   |\
   | o  1: C
   |
   o  0: A
   
 Multiple roots. One root is not an ancestor of dest:
 
   $ rebasewithdag -b B+D -d Z <<'EOF'
   > Z B D
   >  \|\|
   >   A C
   > EOF
   nothing to rebase from f675d5a1c6a4+b70f76719894 to 262e37e34f63
   [1]
 
 Multiple roots. One root is not an ancestor of dest. Select using a merge:
 
   $ rebasewithdag -b E -d Z <<'EOF'
   >   E
   >   |\
   > Z B D
   >  \|\|
   >   A C
   > EOF
   rebasing 2:f675d5a1c6a4 "B" (B)
   rebasing 5:f68696fe6af8 "E" (E tip)
   o    5: E
   |\
   | o    4: B
   | |\
   | | o  3: Z
   | | |
   o | |  2: D
   |/ /
   o /  1: C
    /
   o  0: A
   
 Multiple roots. Two children share two parents while dest has only one parent:
 
   $ rebasewithdag -b B+D -d Z <<'EOF'
   > Z B D
   >  \|\|\
   >   A C A
   > EOF
   rebasing 2:f675d5a1c6a4 "B" (B)
   rebasing 3:c2a779e13b56 "D" (D)
   o    4: D
   |\
   +---o  3: B
   | |/
   | o  2: Z
   | |
   o |  1: C
    /
   o  0: A
   
+Rebasing using a single transaction
+
+  $ hg init singletr && cd singletr
+  $ cat >> .hg/hgrc <<EOF
+  > [rebase]
+  > singletransaction=True
+  > EOF
+  $ hg debugdrawdag <<'EOF'
+  >   Z
+  >   |
+  >   | D
+  >   | |
+  >   | C
+  >   | |
+  >   Y B
+  >   |/
+  >   A
+  > EOF
+- We should only see two status stored messages. One from the start, one from
+- the end.
+  $ hg rebase --debug -b D -d Z | grep 'status stored'
+  rebase status stored
+  rebase status stored
+  $ hg tglog
+  o  5: D
+  |
+  o  4: C
+  |
+  o  3: B
+  |
+  o  2: Z
+  |
+  o  1: Y
+  |
+  o  0: A
+  
+  $ cd ..