copies: return consistent type from revinfo

The return is expected to be a list, so we should return a list. This make the
use of this function from type-checked language (eg: rust) much simpler.

mercurial/copies.py

@@ -1,1014 +1,1014
 # copies.py - copy detection for Mercurial
 #
 # Copyright 2008 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import collections
 import os
 
 from .i18n import _
 
 
 from .revlogutils.flagutil import REVIDX_SIDEDATA
 
 from . import (
     error,
     match as matchmod,
     node,
     pathutil,
     pycompat,
     util,
 )
 
 from .revlogutils import sidedata as sidedatamod
 
 from .utils import stringutil
 
 
 def _filter(src, dst, t):
     """filters out invalid copies after chaining"""
 
     # When _chain()'ing copies in 'a' (from 'src' via some other commit 'mid')
     # with copies in 'b' (from 'mid' to 'dst'), we can get the different cases
     # in the following table (not including trivial cases). For example, case 2
     # is where a file existed in 'src' and remained under that name in 'mid' and
     # then was renamed between 'mid' and 'dst'.
     #
     # case src mid dst result
     #   1   x   y   -    -
     #   2   x   y   y   x->y
     #   3   x   y   x    -
     #   4   x   y   z   x->z
     #   5   -   x   y    -
     #   6   x   x   y   x->y
     #
     # _chain() takes care of chaining the copies in 'a' and 'b', but it
     # cannot tell the difference between cases 1 and 2, between 3 and 4, or
     # between 5 and 6, so it includes all cases in its result.
     # Cases 1, 3, and 5 are then removed by _filter().
 
     for k, v in list(t.items()):
         # remove copies from files that didn't exist
         if v not in src:
             del t[k]
         # remove criss-crossed copies
         elif k in src and v in dst:
             del t[k]
         # remove copies to files that were then removed
         elif k not in dst:
             del t[k]
 
 
 def _chain(a, b):
     """chain two sets of copies 'a' and 'b'"""
     t = a.copy()
     for k, v in pycompat.iteritems(b):
         t[k] = t.get(v, v)
     return t
 
 
 def _tracefile(fctx, am, basemf):
     """return file context that is the ancestor of fctx present in ancestor
     manifest am
 
     Note: we used to try and stop after a given limit, however checking if that
     limit is reached turned out to be very expensive. we are better off
     disabling that feature."""
 
     for f in fctx.ancestors():
         path = f.path()
         if am.get(path, None) == f.filenode():
             return path
         if basemf and basemf.get(path, None) == f.filenode():
             return path
 
 
 def _dirstatecopies(repo, match=None):
     ds = repo.dirstate
     c = ds.copies().copy()
     for k in list(c):
         if ds[k] not in b'anm' or (match and not match(k)):
             del c[k]
     return c
 
 
 def _computeforwardmissing(a, b, match=None):
     """Computes which files are in b but not a.
     This is its own function so extensions can easily wrap this call to see what
     files _forwardcopies is about to process.
     """
     ma = a.manifest()
     mb = b.manifest()
     return mb.filesnotin(ma, match=match)
 
 
 def usechangesetcentricalgo(repo):
     """Checks if we should use changeset-centric copy algorithms"""
     if repo.filecopiesmode == b'changeset-sidedata':
         return True
     readfrom = repo.ui.config(b'experimental', b'copies.read-from')
     changesetsource = (b'changeset-only', b'compatibility')
     return readfrom in changesetsource
 
 
 def _committedforwardcopies(a, b, base, match):
     """Like _forwardcopies(), but b.rev() cannot be None (working copy)"""
     # files might have to be traced back to the fctx parent of the last
     # one-side-only changeset, but not further back than that
     repo = a._repo
 
     if usechangesetcentricalgo(repo):
         return _changesetforwardcopies(a, b, match)
 
     debug = repo.ui.debugflag and repo.ui.configbool(b'devel', b'debug.copies')
     dbg = repo.ui.debug
     if debug:
         dbg(b'debug.copies:    looking into rename from %s to %s\n' % (a, b))
     am = a.manifest()
     basemf = None if base is None else base.manifest()
 
     # find where new files came from
     # we currently don't try to find where old files went, too expensive
     # this means we can miss a case like 'hg rm b; hg cp a b'
     cm = {}
 
     # Computing the forward missing is quite expensive on large manifests, since
     # it compares the entire manifests. We can optimize it in the common use
     # case of computing what copies are in a commit versus its parent (like
     # during a rebase or histedit). Note, we exclude merge commits from this
     # optimization, since the ctx.files() for a merge commit is not correct for
     # this comparison.
     forwardmissingmatch = match
     if b.p1() == a and b.p2().node() == node.nullid:
         filesmatcher = matchmod.exact(b.files())
         forwardmissingmatch = matchmod.intersectmatchers(match, filesmatcher)
     missing = _computeforwardmissing(a, b, match=forwardmissingmatch)
 
     ancestrycontext = a._repo.changelog.ancestors([b.rev()], inclusive=True)
 
     if debug:
         dbg(b'debug.copies:      missing files to search: %d\n' % len(missing))
 
     for f in sorted(missing):
         if debug:
             dbg(b'debug.copies:        tracing file: %s\n' % f)
         fctx = b[f]
         fctx._ancestrycontext = ancestrycontext
 
         if debug:
             start = util.timer()
         opath = _tracefile(fctx, am, basemf)
         if opath:
             if debug:
                 dbg(b'debug.copies:          rename of: %s\n' % opath)
             cm[f] = opath
         if debug:
             dbg(
                 b'debug.copies:          time: %f seconds\n'
                 % (util.timer() - start)
             )
     return cm
 
 
 def _revinfogetter(repo):
     """return a function that return multiple data given a <rev>"i
 
     * p1: revision number of first parent
     * p2: revision number of first parent
     * p1copies: mapping of copies from p1
     * p2copies: mapping of copies from p2
     * removed: a list of removed files
     """
     cl = repo.changelog
     parents = cl.parentrevs
 
     if repo.filecopiesmode == b'changeset-sidedata':
         changelogrevision = cl.changelogrevision
         flags = cl.flags
 
         # A small cache to avoid doing the work twice for merges
         #
         # In the vast majority of cases, if we ask information for a revision
         # about 1 parent, we'll later ask it for the other. So it make sense to
         # keep the information around when reaching the first parent of a merge
         # and dropping it after it was provided for the second parents.
         #
         # It exists cases were only one parent of the merge will be walked. It
         # happens when the "destination" the copy tracing is descendant from a
         # new root, not common with the "source". In that case, we will only walk
         # through merge parents that are descendant of changesets common
         # between "source" and "destination".
         #
         # With the current case implementation if such changesets have a copy
         # information, we'll keep them in memory until the end of
         # _changesetforwardcopies. We don't expect the case to be frequent
         # enough to matters.
         #
         # In addition, it would be possible to reach pathological case, were
         # many first parent are met before any second parent is reached. In
         # that case the cache could grow. If this even become an issue one can
         # safely introduce a maximum cache size. This would trade extra CPU/IO
         # time to save memory.
         merge_caches = {}
 
         def revinfo(rev):
             p1, p2 = parents(rev)
             if flags(rev) & REVIDX_SIDEDATA:
                 e = merge_caches.pop(rev, None)
                 if e is not None:
                     return e
                 c = changelogrevision(rev)
                 p1copies = c.p1copies
                 p2copies = c.p2copies
                 removed = c.filesremoved
                 if p1 != node.nullrev and p2 != node.nullrev:
                     # XXX some case we over cache, IGNORE
                     merge_caches[rev] = (p1, p2, p1copies, p2copies, removed)
             else:
                 p1copies = {}
                 p2copies = {}
-                removed = ()
+                removed = []
             return p1, p2, p1copies, p2copies, removed
 
     else:
 
         def revinfo(rev):
             p1, p2 = parents(rev)
             ctx = repo[rev]
             p1copies, p2copies = ctx._copies
             removed = ctx.filesremoved()
             return p1, p2, p1copies, p2copies, removed
 
     return revinfo
 
 
 def _changesetforwardcopies(a, b, match):
     if a.rev() in (node.nullrev, b.rev()):
         return {}
 
     repo = a.repo().unfiltered()
     children = {}
     revinfo = _revinfogetter(repo)
 
     cl = repo.changelog
     missingrevs = cl.findmissingrevs(common=[a.rev()], heads=[b.rev()])
     mrset = set(missingrevs)
     roots = set()
     for r in missingrevs:
         for p in cl.parentrevs(r):
             if p == node.nullrev:
                 continue
             if p not in children:
                 children[p] = [r]
             else:
                 children[p].append(r)
             if p not in mrset:
                 roots.add(p)
     if not roots:
         # no common revision to track copies from
         return {}
     min_root = min(roots)
 
     from_head = set(
         cl.reachableroots(min_root, [b.rev()], list(roots), includepath=True)
     )
 
     iterrevs = set(from_head)
     iterrevs &= mrset
     iterrevs.update(roots)
     iterrevs.remove(b.rev())
     all_copies = {r: {} for r in roots}
     alwaysmatch = match.always()
     for r in sorted(iterrevs):
         copies = all_copies.pop(r)
         for i, c in enumerate(children[r]):
             p1, p2, p1copies, p2copies, removed = revinfo(c)
             if r == p1:
                 parent = 1
                 childcopies = p1copies
             else:
                 assert r == p2
                 parent = 2
                 childcopies = p2copies
             if not alwaysmatch:
                 childcopies = {
                     dst: src for dst, src in childcopies.items() if match(dst)
                 }
             newcopies = copies
             if childcopies:
                 newcopies = _chain(newcopies, childcopies)
                 # _chain makes a copies, we can avoid doing so in some
                 # simple/linear cases.
                 assert newcopies is not copies
             for f in removed:
                 if f in newcopies:
                     if newcopies is copies:
                         # copy on write to avoid affecting potential other
                         # branches.  when there are no other branches, this
                         # could be avoided.
                         newcopies = copies.copy()
                     del newcopies[f]
             othercopies = all_copies.get(c)
             if othercopies is None:
                 all_copies[c] = newcopies
             else:
                 # we are the second parent to work on c, we need to merge our
                 # work with the other.
                 #
                 # Unlike when copies are stored in the filelog, we consider
                 # it a copy even if the destination already existed on the
                 # other branch. It's simply too expensive to check if the
                 # file existed in the manifest.
                 #
                 # In case of conflict, parent 1 take precedence over parent 2.
                 # This is an arbitrary choice made anew when implementing
                 # changeset based copies. It was made without regards with
                 # potential filelog related behavior.
                 if parent == 1:
                     othercopies.update(newcopies)
                 else:
                     newcopies.update(othercopies)
                     all_copies[c] = newcopies
     return all_copies[b.rev()]
 
 
 def _forwardcopies(a, b, base=None, match=None):
     """find {dst@b: src@a} copy mapping where a is an ancestor of b"""
 
     if base is None:
         base = a
     match = a.repo().narrowmatch(match)
     # check for working copy
     if b.rev() is None:
         cm = _committedforwardcopies(a, b.p1(), base, match)
         # combine copies from dirstate if necessary
         copies = _chain(cm, _dirstatecopies(b._repo, match))
     else:
         copies = _committedforwardcopies(a, b, base, match)
     return copies
 
 
 def _backwardrenames(a, b, match):
     if a._repo.ui.config(b'experimental', b'copytrace') == b'off':
         return {}
 
     # Even though we're not taking copies into account, 1:n rename situations
     # can still exist (e.g. hg cp a b; hg mv a c). In those cases we
     # arbitrarily pick one of the renames.
     # We don't want to pass in "match" here, since that would filter
     # the destination by it. Since we're reversing the copies, we want
     # to filter the source instead.
     f = _forwardcopies(b, a)
     r = {}
     for k, v in sorted(pycompat.iteritems(f)):
         if match and not match(v):
             continue
         # remove copies
         if v in a:
             continue
         r[v] = k
     return r
 
 
 def pathcopies(x, y, match=None):
     """find {dst@y: src@x} copy mapping for directed compare"""
     repo = x._repo
     debug = repo.ui.debugflag and repo.ui.configbool(b'devel', b'debug.copies')
     if debug:
         repo.ui.debug(
             b'debug.copies: searching copies from %s to %s\n' % (x, y)
         )
     if x == y or not x or not y:
         return {}
     a = y.ancestor(x)
     if a == x:
         if debug:
             repo.ui.debug(b'debug.copies: search mode: forward\n')
         if y.rev() is None and x == y.p1():
             # short-circuit to avoid issues with merge states
             return _dirstatecopies(repo, match)
         copies = _forwardcopies(x, y, match=match)
     elif a == y:
         if debug:
             repo.ui.debug(b'debug.copies: search mode: backward\n')
         copies = _backwardrenames(x, y, match=match)
     else:
         if debug:
             repo.ui.debug(b'debug.copies: search mode: combined\n')
         base = None
         if a.rev() != node.nullrev:
             base = x
         copies = _chain(
             _backwardrenames(x, a, match=match),
             _forwardcopies(a, y, base, match=match),
         )
     _filter(x, y, copies)
     return copies
 
 
 def mergecopies(repo, c1, c2, base):
     """
     Finds moves and copies between context c1 and c2 that are relevant for
     merging. 'base' will be used as the merge base.
 
     Copytracing is used in commands like rebase, merge, unshelve, etc to merge
     files that were moved/ copied in one merge parent and modified in another.
     For example:
 
     o          ---> 4 another commit
     |
     |   o      ---> 3 commit that modifies a.txt
     |  /
     o /        ---> 2 commit that moves a.txt to b.txt
     |/
     o          ---> 1 merge base
 
     If we try to rebase revision 3 on revision 4, since there is no a.txt in
     revision 4, and if user have copytrace disabled, we prints the following
     message:
 
     ```other changed <file> which local deleted```
 
     Returns five dicts: "copy", "movewithdir", "diverge", "renamedelete" and
     "dirmove".
 
     "copy" is a mapping from destination name -> source name,
     where source is in c1 and destination is in c2 or vice-versa.
 
     "movewithdir" is a mapping from source name -> destination name,
     where the file at source present in one context but not the other
     needs to be moved to destination by the merge process, because the
     other context moved the directory it is in.
 
     "diverge" is a mapping of source name -> list of destination names
     for divergent renames.
 
     "renamedelete" is a mapping of source name -> list of destination
     names for files deleted in c1 that were renamed in c2 or vice-versa.
 
     "dirmove" is a mapping of detected source dir -> destination dir renames.
     This is needed for handling changes to new files previously grafted into
     renamed directories.
 
     This function calls different copytracing algorithms based on config.
     """
     # avoid silly behavior for update from empty dir
     if not c1 or not c2 or c1 == c2:
         return {}, {}, {}, {}, {}
 
     narrowmatch = c1.repo().narrowmatch()
 
     # avoid silly behavior for parent -> working dir
     if c2.node() is None and c1.node() == repo.dirstate.p1():
         return _dirstatecopies(repo, narrowmatch), {}, {}, {}, {}
 
     copytracing = repo.ui.config(b'experimental', b'copytrace')
     if stringutil.parsebool(copytracing) is False:
         # stringutil.parsebool() returns None when it is unable to parse the
         # value, so we should rely on making sure copytracing is on such cases
         return {}, {}, {}, {}, {}
 
     if usechangesetcentricalgo(repo):
         # The heuristics don't make sense when we need changeset-centric algos
         return _fullcopytracing(repo, c1, c2, base)
 
     # Copy trace disabling is explicitly below the node == p1 logic above
     # because the logic above is required for a simple copy to be kept across a
     # rebase.
     if copytracing == b'heuristics':
         # Do full copytracing if only non-public revisions are involved as
         # that will be fast enough and will also cover the copies which could
         # be missed by heuristics
         if _isfullcopytraceable(repo, c1, base):
             return _fullcopytracing(repo, c1, c2, base)
         return _heuristicscopytracing(repo, c1, c2, base)
     else:
         return _fullcopytracing(repo, c1, c2, base)
 
 
 def _isfullcopytraceable(repo, c1, base):
     """ Checks that if base, source and destination are all no-public branches,
     if yes let's use the full copytrace algorithm for increased capabilities
     since it will be fast enough.
 
     `experimental.copytrace.sourcecommitlimit` can be used to set a limit for
     number of changesets from c1 to base such that if number of changesets are
     more than the limit, full copytracing algorithm won't be used.
     """
     if c1.rev() is None:
         c1 = c1.p1()
     if c1.mutable() and base.mutable():
         sourcecommitlimit = repo.ui.configint(
             b'experimental', b'copytrace.sourcecommitlimit'
         )
         commits = len(repo.revs(b'%d::%d', base.rev(), c1.rev()))
         return commits < sourcecommitlimit
     return False
 
 
 def _checksinglesidecopies(
     src, dsts1, m1, m2, mb, c2, base, copy, renamedelete
 ):
     if src not in m2:
         # deleted on side 2
         if src not in m1:
             # renamed on side 1, deleted on side 2
             renamedelete[src] = dsts1
     elif m2[src] != mb[src]:
         if not _related(c2[src], base[src]):
             return
         # modified on side 2
         for dst in dsts1:
             if dst not in m2:
                 # dst not added on side 2 (handle as regular
                 # "both created" case in manifestmerge otherwise)
                 copy[dst] = src
 
 
 def _fullcopytracing(repo, c1, c2, base):
     """ The full copytracing algorithm which finds all the new files that were
     added from merge base up to the top commit and for each file it checks if
     this file was copied from another file.
 
     This is pretty slow when a lot of changesets are involved but will track all
     the copies.
     """
     m1 = c1.manifest()
     m2 = c2.manifest()
     mb = base.manifest()
 
     copies1 = pathcopies(base, c1)
     copies2 = pathcopies(base, c2)
 
     inversecopies1 = {}
     inversecopies2 = {}
     for dst, src in copies1.items():
         inversecopies1.setdefault(src, []).append(dst)
     for dst, src in copies2.items():
         inversecopies2.setdefault(src, []).append(dst)
 
     copy = {}
     diverge = {}
     renamedelete = {}
     allsources = set(inversecopies1) | set(inversecopies2)
     for src in allsources:
         dsts1 = inversecopies1.get(src)
         dsts2 = inversecopies2.get(src)
         if dsts1 and dsts2:
             # copied/renamed on both sides
             if src not in m1 and src not in m2:
                 # renamed on both sides
                 dsts1 = set(dsts1)
                 dsts2 = set(dsts2)
                 # If there's some overlap in the rename destinations, we
                 # consider it not divergent. For example, if side 1 copies 'a'
                 # to 'b' and 'c' and deletes 'a', and side 2 copies 'a' to 'c'
                 # and 'd' and deletes 'a'.
                 if dsts1 & dsts2:
                     for dst in dsts1 & dsts2:
                         copy[dst] = src
                 else:
                     diverge[src] = sorted(dsts1 | dsts2)
             elif src in m1 and src in m2:
                 # copied on both sides
                 dsts1 = set(dsts1)
                 dsts2 = set(dsts2)
                 for dst in dsts1 & dsts2:
                     copy[dst] = src
             # TODO: Handle cases where it was renamed on one side and copied
             # on the other side
         elif dsts1:
             # copied/renamed only on side 1
             _checksinglesidecopies(
                 src, dsts1, m1, m2, mb, c2, base, copy, renamedelete
             )
         elif dsts2:
             # copied/renamed only on side 2
             _checksinglesidecopies(
                 src, dsts2, m2, m1, mb, c1, base, copy, renamedelete
             )
 
     renamedeleteset = set()
     divergeset = set()
     for dsts in diverge.values():
         divergeset.update(dsts)
     for dsts in renamedelete.values():
         renamedeleteset.update(dsts)
 
     # find interesting file sets from manifests
     addedinm1 = m1.filesnotin(mb, repo.narrowmatch())
     addedinm2 = m2.filesnotin(mb, repo.narrowmatch())
     u1 = sorted(addedinm1 - addedinm2)
     u2 = sorted(addedinm2 - addedinm1)
 
     header = b"  unmatched files in %s"
     if u1:
         repo.ui.debug(b"%s:\n   %s\n" % (header % b'local', b"\n   ".join(u1)))
     if u2:
         repo.ui.debug(b"%s:\n   %s\n" % (header % b'other', b"\n   ".join(u2)))
 
     fullcopy = copies1.copy()
     fullcopy.update(copies2)
     if not fullcopy:
         return copy, {}, diverge, renamedelete, {}
 
     if repo.ui.debugflag:
         repo.ui.debug(
             b"  all copies found (* = to merge, ! = divergent, "
             b"% = renamed and deleted):\n"
         )
         for f in sorted(fullcopy):
             note = b""
             if f in copy:
                 note += b"*"
             if f in divergeset:
                 note += b"!"
             if f in renamedeleteset:
                 note += b"%"
             repo.ui.debug(
                 b"   src: '%s' -> dst: '%s' %s\n" % (fullcopy[f], f, note)
             )
     del divergeset
 
     repo.ui.debug(b"  checking for directory renames\n")
 
     # generate a directory move map
     d1, d2 = c1.dirs(), c2.dirs()
     invalid = set()
     dirmove = {}
 
     # examine each file copy for a potential directory move, which is
     # when all the files in a directory are moved to a new directory
     for dst, src in pycompat.iteritems(fullcopy):
         dsrc, ddst = pathutil.dirname(src), pathutil.dirname(dst)
         if dsrc in invalid:
             # already seen to be uninteresting
             continue
         elif dsrc in d1 and ddst in d1:
             # directory wasn't entirely moved locally
             invalid.add(dsrc)
         elif dsrc in d2 and ddst in d2:
             # directory wasn't entirely moved remotely
             invalid.add(dsrc)
         elif dsrc in dirmove and dirmove[dsrc] != ddst:
             # files from the same directory moved to two different places
             invalid.add(dsrc)
         else:
             # looks good so far
             dirmove[dsrc] = ddst
 
     for i in invalid:
         if i in dirmove:
             del dirmove[i]
     del d1, d2, invalid
 
     if not dirmove:
         return copy, {}, diverge, renamedelete, {}
 
     dirmove = {k + b"/": v + b"/" for k, v in pycompat.iteritems(dirmove)}
 
     for d in dirmove:
         repo.ui.debug(
             b"   discovered dir src: '%s' -> dst: '%s'\n" % (d, dirmove[d])
         )
 
     movewithdir = {}
     # check unaccounted nonoverlapping files against directory moves
     for f in u1 + u2:
         if f not in fullcopy:
             for d in dirmove:
                 if f.startswith(d):
                     # new file added in a directory that was moved, move it
                     df = dirmove[d] + f[len(d) :]
                     if df not in copy:
                         movewithdir[f] = df
                         repo.ui.debug(
                             b"   pending file src: '%s' -> dst: '%s'\n"
                             % (f, df)
                         )
                     break
 
     return copy, movewithdir, diverge, renamedelete, dirmove
 
 
 def _heuristicscopytracing(repo, c1, c2, base):
     """ Fast copytracing using filename heuristics
 
     Assumes that moves or renames are of following two types:
 
     1) Inside a directory only (same directory name but different filenames)
     2) Move from one directory to another
                     (same filenames but different directory names)
 
     Works only when there are no merge commits in the "source branch".
     Source branch is commits from base up to c2 not including base.
 
     If merge is involved it fallbacks to _fullcopytracing().
 
     Can be used by setting the following config:
 
         [experimental]
         copytrace = heuristics
 
     In some cases the copy/move candidates found by heuristics can be very large
     in number and that will make the algorithm slow. The number of possible
     candidates to check can be limited by using the config
     `experimental.copytrace.movecandidateslimit` which defaults to 100.
     """
 
     if c1.rev() is None:
         c1 = c1.p1()
     if c2.rev() is None:
         c2 = c2.p1()
 
     copies = {}
 
     changedfiles = set()
     m1 = c1.manifest()
     if not repo.revs(b'%d::%d', base.rev(), c2.rev()):
         # If base is not in c2 branch, we switch to fullcopytracing
         repo.ui.debug(
             b"switching to full copytracing as base is not "
             b"an ancestor of c2\n"
         )
         return _fullcopytracing(repo, c1, c2, base)
 
     ctx = c2
     while ctx != base:
         if len(ctx.parents()) == 2:
             # To keep things simple let's not handle merges
             repo.ui.debug(b"switching to full copytracing because of merges\n")
             return _fullcopytracing(repo, c1, c2, base)
         changedfiles.update(ctx.files())
         ctx = ctx.p1()
 
     cp = _forwardcopies(base, c2)
     for dst, src in pycompat.iteritems(cp):
         if src in m1:
             copies[dst] = src
 
     # file is missing if it isn't present in the destination, but is present in
     # the base and present in the source.
     # Presence in the base is important to exclude added files, presence in the
     # source is important to exclude removed files.
     filt = lambda f: f not in m1 and f in base and f in c2
     missingfiles = [f for f in changedfiles if filt(f)]
 
     if missingfiles:
         basenametofilename = collections.defaultdict(list)
         dirnametofilename = collections.defaultdict(list)
 
         for f in m1.filesnotin(base.manifest()):
             basename = os.path.basename(f)
             dirname = os.path.dirname(f)
             basenametofilename[basename].append(f)
             dirnametofilename[dirname].append(f)
 
         for f in missingfiles:
             basename = os.path.basename(f)
             dirname = os.path.dirname(f)
             samebasename = basenametofilename[basename]
             samedirname = dirnametofilename[dirname]
             movecandidates = samebasename + samedirname
             # f is guaranteed to be present in c2, that's why
             # c2.filectx(f) won't fail
             f2 = c2.filectx(f)
             # we can have a lot of candidates which can slow down the heuristics
             # config value to limit the number of candidates moves to check
             maxcandidates = repo.ui.configint(
                 b'experimental', b'copytrace.movecandidateslimit'
             )
 
             if len(movecandidates) > maxcandidates:
                 repo.ui.status(
                     _(
                         b"skipping copytracing for '%s', more "
                         b"candidates than the limit: %d\n"
                     )
                     % (f, len(movecandidates))
                 )
                 continue
 
             for candidate in movecandidates:
                 f1 = c1.filectx(candidate)
                 if _related(f1, f2):
                     # if there are a few related copies then we'll merge
                     # changes into all of them. This matches the behaviour
                     # of upstream copytracing
                     copies[candidate] = f
 
     return copies, {}, {}, {}, {}
 
 
 def _related(f1, f2):
     """return True if f1 and f2 filectx have a common ancestor
 
     Walk back to common ancestor to see if the two files originate
     from the same file. Since workingfilectx's rev() is None it messes
     up the integer comparison logic, hence the pre-step check for
     None (f1 and f2 can only be workingfilectx's initially).
     """
 
     if f1 == f2:
         return True  # a match
 
     g1, g2 = f1.ancestors(), f2.ancestors()
     try:
         f1r, f2r = f1.linkrev(), f2.linkrev()
 
         if f1r is None:
             f1 = next(g1)
         if f2r is None:
             f2 = next(g2)
 
         while True:
             f1r, f2r = f1.linkrev(), f2.linkrev()
             if f1r > f2r:
                 f1 = next(g1)
             elif f2r > f1r:
                 f2 = next(g2)
             else:  # f1 and f2 point to files in the same linkrev
                 return f1 == f2  # true if they point to the same file
     except StopIteration:
         return False
 
 
 def duplicatecopies(repo, wctx, rev, fromrev, skiprev=None):
     """reproduce copies from fromrev to rev in the dirstate
 
     If skiprev is specified, it's a revision that should be used to
     filter copy records. Any copies that occur between fromrev and
     skiprev will not be duplicated, even if they appear in the set of
     copies between fromrev and rev.
     """
     exclude = {}
     ctraceconfig = repo.ui.config(b'experimental', b'copytrace')
     bctrace = stringutil.parsebool(ctraceconfig)
     if skiprev is not None and (
         ctraceconfig == b'heuristics' or bctrace or bctrace is None
     ):
         # copytrace='off' skips this line, but not the entire function because
         # the line below is O(size of the repo) during a rebase, while the rest
         # of the function is much faster (and is required for carrying copy
         # metadata across the rebase anyway).
         exclude = pathcopies(repo[fromrev], repo[skiprev])
     for dst, src in pycompat.iteritems(pathcopies(repo[fromrev], repo[rev])):
         if dst in exclude:
             continue
         if dst in wctx:
             wctx[dst].markcopied(src)
 
 
 def computechangesetfilesadded(ctx):
     """return the list of files added in a changeset
     """
     added = []
     for f in ctx.files():
         if not any(f in p for p in ctx.parents()):
             added.append(f)
     return added
 
 
 def computechangesetfilesremoved(ctx):
     """return the list of files removed in a changeset
     """
     removed = []
     for f in ctx.files():
         if f not in ctx:
             removed.append(f)
     return removed
 
 
 def computechangesetcopies(ctx):
     """return the copies data for a changeset
 
     The copies data are returned as a pair of dictionnary (p1copies, p2copies).
 
     Each dictionnary are in the form: `{newname: oldname}`
     """
     p1copies = {}
     p2copies = {}
     p1 = ctx.p1()
     p2 = ctx.p2()
     narrowmatch = ctx._repo.narrowmatch()
     for dst in ctx.files():
         if not narrowmatch(dst) or dst not in ctx:
             continue
         copied = ctx[dst].renamed()
         if not copied:
             continue
         src, srcnode = copied
         if src in p1 and p1[src].filenode() == srcnode:
             p1copies[dst] = src
         elif src in p2 and p2[src].filenode() == srcnode:
             p2copies[dst] = src
     return p1copies, p2copies
 
 
 def encodecopies(files, copies):
     items = []
     for i, dst in enumerate(files):
         if dst in copies:
             items.append(b'%d\0%s' % (i, copies[dst]))
     if len(items) != len(copies):
         raise error.ProgrammingError(
             b'some copy targets missing from file list'
         )
     return b"\n".join(items)
 
 
 def decodecopies(files, data):
     try:
         copies = {}
         if not data:
             return copies
         for l in data.split(b'\n'):
             strindex, src = l.split(b'\0')
             i = int(strindex)
             dst = files[i]
             copies[dst] = src
         return copies
     except (ValueError, IndexError):
         # Perhaps someone had chosen the same key name (e.g. "p1copies") and
         # used different syntax for the value.
         return None
 
 
 def encodefileindices(files, subset):
     subset = set(subset)
     indices = []
     for i, f in enumerate(files):
         if f in subset:
             indices.append(b'%d' % i)
     return b'\n'.join(indices)
 
 
 def decodefileindices(files, data):
     try:
         subset = []
         if not data:
             return subset
         for strindex in data.split(b'\n'):
             i = int(strindex)
             if i < 0 or i >= len(files):
                 return None
             subset.append(files[i])
         return subset
     except (ValueError, IndexError):
         # Perhaps someone had chosen the same key name (e.g. "added") and
         # used different syntax for the value.
         return None
 
 
 def _getsidedata(srcrepo, rev):
     ctx = srcrepo[rev]
     filescopies = computechangesetcopies(ctx)
     filesadded = computechangesetfilesadded(ctx)
     filesremoved = computechangesetfilesremoved(ctx)
     sidedata = {}
     if any([filescopies, filesadded, filesremoved]):
         sortedfiles = sorted(ctx.files())
         p1copies, p2copies = filescopies
         p1copies = encodecopies(sortedfiles, p1copies)
         p2copies = encodecopies(sortedfiles, p2copies)
         filesadded = encodefileindices(sortedfiles, filesadded)
         filesremoved = encodefileindices(sortedfiles, filesremoved)
         if p1copies:
             sidedata[sidedatamod.SD_P1COPIES] = p1copies
         if p2copies:
             sidedata[sidedatamod.SD_P2COPIES] = p2copies
         if filesadded:
             sidedata[sidedatamod.SD_FILESADDED] = filesadded
         if filesremoved:
             sidedata[sidedatamod.SD_FILESREMOVED] = filesremoved
     return sidedata
 
 
 def getsidedataadder(srcrepo, destrepo):
     def sidedatacompanion(revlog, rev):
         sidedata = {}
         if util.safehasattr(revlog, 'filteredrevs'):  # this is a changelog
             sidedata = _getsidedata(srcrepo, rev)
         return False, (), sidedata
 
     return sidedatacompanion
 
 
 def getsidedataremover(srcrepo, destrepo):
     def sidedatacompanion(revlog, rev):
         f = ()
         if util.safehasattr(revlog, 'filteredrevs'):  # this is a changelog
             if revlog.flags(rev) & REVIDX_SIDEDATA:
                 f = (
                     sidedatamod.SD_P1COPIES,
                     sidedatamod.SD_P2COPIES,
                     sidedatamod.SD_FILESADDED,
                     sidedatamod.SD_FILESREMOVED,
                 )
         return False, f, {}
 
     return sidedatacompanion