error: use detailed exit code 10 for command errors

Command errors (unknown or ambiguous commands, or bad command
arguments or options) are handled in the `dispatch` module. Most other
errors are handled in the `scmutil` module. This patch therefore has
to duplicate a little bit of code from the `scmutil` module. It's just
a few lines, however, so it seems fine to me. It's a pretty common
category of errors, so it's important to have them respect
`ui.detailed-exit-code`.

Differential Revision: https://phab.mercurial-scm.org/D9777

mercurial/dispatch.py

@@ -1,1368 +1,1375 b''
 # dispatch.py - command dispatching for mercurial
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import, print_function
 
 import errno
 import getopt
 import io
 import os
 import pdb
 import re
 import signal
 import sys
 import traceback
 
 
 from .i18n import _
 from .pycompat import getattr
 
 from hgdemandimport import tracing
 
 from . import (
     cmdutil,
     color,
     commands,
     demandimport,
     encoding,
     error,
     extensions,
     fancyopts,
     help,
     hg,
     hook,
     localrepo,
     profiling,
     pycompat,
     rcutil,
     registrar,
     requirements as requirementsmod,
     scmutil,
     ui as uimod,
     util,
     vfs,
 )
 
 from .utils import (
     procutil,
     stringutil,
 )
 
 
 class request(object):
     def __init__(
         self,
         args,
         ui=None,
         repo=None,
         fin=None,
         fout=None,
         ferr=None,
         fmsg=None,
         prereposetups=None,
     ):
         self.args = args
         self.ui = ui
         self.repo = repo
 
         # input/output/error streams
         self.fin = fin
         self.fout = fout
         self.ferr = ferr
         # separate stream for status/error messages
         self.fmsg = fmsg
 
         # remember options pre-parsed by _earlyparseopts()
         self.earlyoptions = {}
 
         # reposetups which run before extensions, useful for chg to pre-fill
         # low-level repo state (for example, changelog) before extensions.
         self.prereposetups = prereposetups or []
 
         # store the parsed and canonical command
         self.canonical_command = None
 
     def _runexithandlers(self):
         exc = None
         handlers = self.ui._exithandlers
         try:
             while handlers:
                 func, args, kwargs = handlers.pop()
                 try:
                     func(*args, **kwargs)
                 except:  # re-raises below
                     if exc is None:
                         exc = sys.exc_info()[1]
                     self.ui.warnnoi18n(b'error in exit handlers:\n')
                     self.ui.traceback(force=True)
         finally:
             if exc is not None:
                 raise exc
 
 
 def _flushstdio(ui, err):
     status = None
     # In all cases we try to flush stdio streams.
     if util.safehasattr(ui, b'fout'):
         assert ui is not None  # help pytype
         assert ui.fout is not None  # help pytype
         try:
             ui.fout.flush()
         except IOError as e:
             err = e
             status = -1
 
     if util.safehasattr(ui, b'ferr'):
         assert ui is not None  # help pytype
         assert ui.ferr is not None  # help pytype
         try:
             if err is not None and err.errno != errno.EPIPE:
                 ui.ferr.write(
                     b'abort: %s\n' % encoding.strtolocal(err.strerror)
                 )
             ui.ferr.flush()
         # There's not much we can do about an I/O error here. So (possibly)
         # change the status code and move on.
         except IOError:
             status = -1
 
     return status
 
 
 def run():
     """run the command in sys.argv"""
     try:
         initstdio()
         with tracing.log('parse args into request'):
             req = request(pycompat.sysargv[1:])
 
         status = dispatch(req)
         _silencestdio()
     except KeyboardInterrupt:
         # Catch early/late KeyboardInterrupt as last ditch. Here nothing will
         # be printed to console to avoid another IOError/KeyboardInterrupt.
         status = -1
     sys.exit(status & 255)
 
 
 if pycompat.ispy3:
 
     def initstdio():
         # stdio streams on Python 3 are io.TextIOWrapper instances proxying another
         # buffer. These streams will normalize \n to \r\n by default. Mercurial's
         # preferred mechanism for writing output (ui.write()) uses io.BufferedWriter
         # instances, which write to the underlying stdio file descriptor in binary
         # mode. ui.write() uses \n for line endings and no line ending normalization
         # is attempted through this interface. This "just works," even if the system
         # preferred line ending is not \n.
         #
         # But some parts of Mercurial (e.g. hooks) can still send data to sys.stdout
         # and sys.stderr. They will inherit the line ending normalization settings,
         # potentially causing e.g. \r\n to be emitted. Since emitting \n should
         # "just work," here we change the sys.* streams to disable line ending
         # normalization, ensuring compatibility with our ui type.
 
         if sys.stdout is not None:
             # write_through is new in Python 3.7.
             kwargs = {
                 "newline": "\n",
                 "line_buffering": sys.stdout.line_buffering,
             }
             if util.safehasattr(sys.stdout, "write_through"):
                 kwargs["write_through"] = sys.stdout.write_through
             sys.stdout = io.TextIOWrapper(
                 sys.stdout.buffer,
                 sys.stdout.encoding,
                 sys.stdout.errors,
                 **kwargs
             )
 
         if sys.stderr is not None:
             kwargs = {
                 "newline": "\n",
                 "line_buffering": sys.stderr.line_buffering,
             }
             if util.safehasattr(sys.stderr, "write_through"):
                 kwargs["write_through"] = sys.stderr.write_through
             sys.stderr = io.TextIOWrapper(
                 sys.stderr.buffer,
                 sys.stderr.encoding,
                 sys.stderr.errors,
                 **kwargs
             )
 
         if sys.stdin is not None:
             # No write_through on read-only stream.
             sys.stdin = io.TextIOWrapper(
                 sys.stdin.buffer,
                 sys.stdin.encoding,
                 sys.stdin.errors,
                 # None is universal newlines mode.
                 newline=None,
                 line_buffering=sys.stdin.line_buffering,
             )
 
     def _silencestdio():
         for fp in (sys.stdout, sys.stderr):
             if fp is None:
                 continue
             # Check if the file is okay
             try:
                 fp.flush()
                 continue
             except IOError:
                 pass
             # Otherwise mark it as closed to silence "Exception ignored in"
             # message emitted by the interpreter finalizer.
             try:
                 fp.close()
             except IOError:
                 pass
 
 
 else:
 
     def initstdio():
         for fp in (sys.stdin, sys.stdout, sys.stderr):
             procutil.setbinary(fp)
 
     def _silencestdio():
         pass
 
 
 def _formatargs(args):
     return b' '.join(procutil.shellquote(a) for a in args)
 
 
 def dispatch(req):
     """run the command specified in req.args; returns an integer status code"""
     err = None
     try:
         status = _rundispatch(req)
     except error.StdioError as e:
         err = e
         status = -1
 
     ret = _flushstdio(req.ui, err)
     if ret:
         status = ret
     return status
 
 
 def _rundispatch(req):
     with tracing.log('dispatch._rundispatch'):
         if req.ferr:
             ferr = req.ferr
         elif req.ui:
             ferr = req.ui.ferr
         else:
             ferr = procutil.stderr
 
         try:
             if not req.ui:
                 req.ui = uimod.ui.load()
             req.earlyoptions.update(_earlyparseopts(req.ui, req.args))
             if req.earlyoptions[b'traceback']:
                 req.ui.setconfig(b'ui', b'traceback', b'on', b'--traceback')
 
             # set ui streams from the request
             if req.fin:
                 req.ui.fin = req.fin
             if req.fout:
                 req.ui.fout = req.fout
             if req.ferr:
                 req.ui.ferr = req.ferr
             if req.fmsg:
                 req.ui.fmsg = req.fmsg
         except error.Abort as inst:
             ferr.write(inst.format())
             return -1
 
         msg = _formatargs(req.args)
         starttime = util.timer()
         ret = 1  # default of Python exit code on unhandled exception
         try:
             ret = _runcatch(req) or 0
         except error.ProgrammingError as inst:
             req.ui.error(_(b'** ProgrammingError: %s\n') % inst)
             if inst.hint:
                 req.ui.error(_(b'** (%s)\n') % inst.hint)
             raise
         except KeyboardInterrupt as inst:
             try:
                 if isinstance(inst, error.SignalInterrupt):
                     msg = _(b"killed!\n")
                 else:
                     msg = _(b"interrupted!\n")
                 req.ui.error(msg)
             except error.SignalInterrupt:
                 # maybe pager would quit without consuming all the output, and
                 # SIGPIPE was raised. we cannot print anything in this case.
                 pass
             except IOError as inst:
                 if inst.errno != errno.EPIPE:
                     raise
             ret = -1
         finally:
             duration = util.timer() - starttime
             req.ui.flush()  # record blocked times
             if req.ui.logblockedtimes:
                 req.ui._blockedtimes[b'command_duration'] = duration * 1000
                 req.ui.log(
                     b'uiblocked',
                     b'ui blocked ms\n',
                     **pycompat.strkwargs(req.ui._blockedtimes)
                 )
             return_code = ret & 255
             req.ui.log(
                 b"commandfinish",
                 b"%s exited %d after %0.2f seconds\n",
                 msg,
                 return_code,
                 duration,
                 return_code=return_code,
                 duration=duration,
                 canonical_command=req.canonical_command,
             )
             try:
                 req._runexithandlers()
             except:  # exiting, so no re-raises
                 ret = ret or -1
             # do flush again since ui.log() and exit handlers may write to ui
             req.ui.flush()
         return ret
 
 
 def _runcatch(req):
     with tracing.log('dispatch._runcatch'):
 
         def catchterm(*args):
             raise error.SignalInterrupt
 
         ui = req.ui
         try:
             for name in b'SIGBREAK', b'SIGHUP', b'SIGTERM':
                 num = getattr(signal, name, None)
                 if num:
                     signal.signal(num, catchterm)
         except ValueError:
             pass  # happens if called in a thread
 
         def _runcatchfunc():
             realcmd = None
             try:
                 cmdargs = fancyopts.fancyopts(
                     req.args[:], commands.globalopts, {}
                 )
                 cmd = cmdargs[0]
                 aliases, entry = cmdutil.findcmd(cmd, commands.table, False)
                 realcmd = aliases[0]
             except (
                 error.UnknownCommand,
                 error.AmbiguousCommand,
                 IndexError,
                 getopt.GetoptError,
             ):
                 # Don't handle this here. We know the command is
                 # invalid, but all we're worried about for now is that
                 # it's not a command that server operators expect to
                 # be safe to offer to users in a sandbox.
                 pass
             if realcmd == b'serve' and b'--stdio' in cmdargs:
                 # We want to constrain 'hg serve --stdio' instances pretty
                 # closely, as many shared-ssh access tools want to grant
                 # access to run *only* 'hg -R $repo serve --stdio'. We
                 # restrict to exactly that set of arguments, and prohibit
                 # any repo name that starts with '--' to prevent
                 # shenanigans wherein a user does something like pass
                 # --debugger or --config=ui.debugger=1 as a repo
                 # name. This used to actually run the debugger.
                 if (
                     len(req.args) != 4
                     or req.args[0] != b'-R'
                     or req.args[1].startswith(b'--')
                     or req.args[2] != b'serve'
                     or req.args[3] != b'--stdio'
                 ):
                     raise error.Abort(
                         _(b'potentially unsafe serve --stdio invocation: %s')
                         % (stringutil.pprint(req.args),)
                     )
 
             try:
                 debugger = b'pdb'
                 debugtrace = {b'pdb': pdb.set_trace}
                 debugmortem = {b'pdb': pdb.post_mortem}
 
                 # read --config before doing anything else
                 # (e.g. to change trust settings for reading .hg/hgrc)
                 cfgs = _parseconfig(req.ui, req.earlyoptions[b'config'])
 
                 if req.repo:
                     # copy configs that were passed on the cmdline (--config) to
                     # the repo ui
                     for sec, name, val in cfgs:
                         req.repo.ui.setconfig(
                             sec, name, val, source=b'--config'
                         )
 
                 # developer config: ui.debugger
                 debugger = ui.config(b"ui", b"debugger")
                 debugmod = pdb
                 if not debugger or ui.plain():
                     # if we are in HGPLAIN mode, then disable custom debugging
                     debugger = b'pdb'
                 elif req.earlyoptions[b'debugger']:
                     # This import can be slow for fancy debuggers, so only
                     # do it when absolutely necessary, i.e. when actual
                     # debugging has been requested
                     with demandimport.deactivated():
                         try:
                             debugmod = __import__(debugger)
                         except ImportError:
                             pass  # Leave debugmod = pdb
 
                 debugtrace[debugger] = debugmod.set_trace
                 debugmortem[debugger] = debugmod.post_mortem
 
                 # enter the debugger before command execution
                 if req.earlyoptions[b'debugger']:
                     ui.warn(
                         _(
                             b"entering debugger - "
                             b"type c to continue starting hg or h for help\n"
                         )
                     )
 
                     if (
                         debugger != b'pdb'
                         and debugtrace[debugger] == debugtrace[b'pdb']
                     ):
                         ui.warn(
                             _(
                                 b"%s debugger specified "
                                 b"but its module was not found\n"
                             )
                             % debugger
                         )
                     with demandimport.deactivated():
                         debugtrace[debugger]()
                 try:
                     return _dispatch(req)
                 finally:
                     ui.flush()
             except:  # re-raises
                 # enter the debugger when we hit an exception
                 if req.earlyoptions[b'debugger']:
                     traceback.print_exc()
                     debugmortem[debugger](sys.exc_info()[2])
                 raise
 
         return _callcatch(ui, _runcatchfunc)
 
 
 def _callcatch(ui, func):
     """like scmutil.callcatch but handles more high-level exceptions about
     config parsing and commands. besides, use handlecommandexception to handle
     uncaught exceptions.
     """
+    detailed_exit_code = -1
     try:
         return scmutil.callcatch(ui, func)
     except error.AmbiguousCommand as inst:
+        detailed_exit_code = 10
         ui.warn(
             _(b"hg: command '%s' is ambiguous:\n    %s\n")
             % (inst.prefix, b" ".join(inst.matches))
         )
     except error.CommandError as inst:
+        detailed_exit_code = 10
         if inst.command:
             ui.pager(b'help')
             msgbytes = pycompat.bytestr(inst.message)
             ui.warn(_(b"hg %s: %s\n") % (inst.command, msgbytes))
             commands.help_(ui, inst.command, full=False, command=True)
         else:
             ui.warn(_(b"hg: %s\n") % inst.message)
             ui.warn(_(b"(use 'hg help -v' for a list of global options)\n"))
     except error.UnknownCommand as inst:
+        detailed_exit_code = 10
         nocmdmsg = _(b"hg: unknown command '%s'\n") % inst.command
         try:
             # check if the command is in a disabled extension
             # (but don't check for extensions themselves)
             formatted = help.formattedhelp(
                 ui, commands, inst.command, unknowncmd=True
             )
             ui.warn(nocmdmsg)
             ui.write(formatted)
         except (error.UnknownCommand, error.Abort):
             suggested = False
             if inst.all_commands:
                 sim = error.getsimilar(inst.all_commands, inst.command)
                 if sim:
                     ui.warn(nocmdmsg)
                     ui.warn(b"(%s)\n" % error.similarity_hint(sim))
                     suggested = True
             if not suggested:
                 ui.warn(nocmdmsg)
                 ui.warn(_(b"(use 'hg help' for a list of commands)\n"))
     except IOError:
         raise
     except KeyboardInterrupt:
         raise
     except:  # probably re-raises
         if not handlecommandexception(ui):
             raise
 
-    return -1
+    if ui.configbool(b'ui', b'detailed-exit-code'):
+        return detailed_exit_code
+    else:
+        return -1
 
 
 def aliasargs(fn, givenargs):
     args = []
     # only care about alias 'args', ignore 'args' set by extensions.wrapfunction
     if not util.safehasattr(fn, b'_origfunc'):
         args = getattr(fn, 'args', args)
     if args:
         cmd = b' '.join(map(procutil.shellquote, args))
 
         nums = []
 
         def replacer(m):
             num = int(m.group(1)) - 1
             nums.append(num)
             if num < len(givenargs):
                 return givenargs[num]
             raise error.InputError(_(b'too few arguments for command alias'))
 
         cmd = re.sub(br'\$(\d+|\$)', replacer, cmd)
         givenargs = [x for i, x in enumerate(givenargs) if i not in nums]
         args = pycompat.shlexsplit(cmd)
     return args + givenargs
 
 
 def aliasinterpolate(name, args, cmd):
     """interpolate args into cmd for shell aliases
 
     This also handles $0, $@ and "$@".
     """
     # util.interpolate can't deal with "$@" (with quotes) because it's only
     # built to match prefix + patterns.
     replacemap = {b'$%d' % (i + 1): arg for i, arg in enumerate(args)}
     replacemap[b'$0'] = name
     replacemap[b'$$'] = b'$'
     replacemap[b'$@'] = b' '.join(args)
     # Typical Unix shells interpolate "$@" (with quotes) as all the positional
     # parameters, separated out into words. Emulate the same behavior here by
     # quoting the arguments individually. POSIX shells will then typically
     # tokenize each argument into exactly one word.
     replacemap[b'"$@"'] = b' '.join(procutil.shellquote(arg) for arg in args)
     # escape '\$' for regex
     regex = b'|'.join(replacemap.keys()).replace(b'$', br'\$')
     r = re.compile(regex)
     return r.sub(lambda x: replacemap[x.group()], cmd)
 
 
 class cmdalias(object):
     def __init__(self, ui, name, definition, cmdtable, source):
         self.name = self.cmd = name
         self.cmdname = b''
         self.definition = definition
         self.fn = None
         self.givenargs = []
         self.opts = []
         self.help = b''
         self.badalias = None
         self.unknowncmd = False
         self.source = source
 
         try:
             aliases, entry = cmdutil.findcmd(self.name, cmdtable)
             for alias, e in pycompat.iteritems(cmdtable):
                 if e is entry:
                     self.cmd = alias
                     break
             self.shadows = True
         except error.UnknownCommand:
             self.shadows = False
 
         if not self.definition:
             self.badalias = _(b"no definition for alias '%s'") % self.name
             return
 
         if self.definition.startswith(b'!'):
             shdef = self.definition[1:]
             self.shell = True
 
             def fn(ui, *args):
                 env = {b'HG_ARGS': b' '.join((self.name,) + args)}
 
                 def _checkvar(m):
                     if m.groups()[0] == b'$':
                         return m.group()
                     elif int(m.groups()[0]) <= len(args):
                         return m.group()
                     else:
                         ui.debug(
                             b"No argument found for substitution "
                             b"of %i variable in alias '%s' definition.\n"
                             % (int(m.groups()[0]), self.name)
                         )
                         return b''
 
                 cmd = re.sub(br'\$(\d+|\$)', _checkvar, shdef)
                 cmd = aliasinterpolate(self.name, args, cmd)
                 return ui.system(
                     cmd, environ=env, blockedtag=b'alias_%s' % self.name
                 )
 
             self.fn = fn
             self.alias = True
             self._populatehelp(ui, name, shdef, self.fn)
             return
 
         try:
             args = pycompat.shlexsplit(self.definition)
         except ValueError as inst:
             self.badalias = _(b"error in definition for alias '%s': %s") % (
                 self.name,
                 stringutil.forcebytestr(inst),
             )
             return
         earlyopts, args = _earlysplitopts(args)
         if earlyopts:
             self.badalias = _(
                 b"error in definition for alias '%s': %s may "
                 b"only be given on the command line"
             ) % (self.name, b'/'.join(pycompat.ziplist(*earlyopts)[0]))
             return
         self.cmdname = cmd = args.pop(0)
         self.givenargs = args
 
         try:
             tableentry = cmdutil.findcmd(cmd, cmdtable, False)[1]
             if len(tableentry) > 2:
                 self.fn, self.opts, cmdhelp = tableentry
             else:
                 self.fn, self.opts = tableentry
                 cmdhelp = None
 
             self.alias = True
             self._populatehelp(ui, name, cmd, self.fn, cmdhelp)
 
         except error.UnknownCommand:
             self.badalias = _(
                 b"alias '%s' resolves to unknown command '%s'"
             ) % (
                 self.name,
                 cmd,
             )
             self.unknowncmd = True
         except error.AmbiguousCommand:
             self.badalias = _(
                 b"alias '%s' resolves to ambiguous command '%s'"
             ) % (
                 self.name,
                 cmd,
             )
 
     def _populatehelp(self, ui, name, cmd, fn, defaulthelp=None):
         # confine strings to be passed to i18n.gettext()
         cfg = {}
         for k in (b'doc', b'help', b'category'):
             v = ui.config(b'alias', b'%s:%s' % (name, k), None)
             if v is None:
                 continue
             if not encoding.isasciistr(v):
                 self.badalias = _(
                     b"non-ASCII character in alias definition '%s:%s'"
                 ) % (name, k)
                 return
             cfg[k] = v
 
         self.help = cfg.get(b'help', defaulthelp or b'')
         if self.help and self.help.startswith(b"hg " + cmd):
             # drop prefix in old-style help lines so hg shows the alias
             self.help = self.help[4 + len(cmd) :]
 
         self.owndoc = b'doc' in cfg
         doc = cfg.get(b'doc', pycompat.getdoc(fn))
         if doc is not None:
             doc = pycompat.sysstr(doc)
         self.__doc__ = doc
 
         self.helpcategory = cfg.get(
             b'category', registrar.command.CATEGORY_NONE
         )
 
     @property
     def args(self):
         args = pycompat.maplist(util.expandpath, self.givenargs)
         return aliasargs(self.fn, args)
 
     def __getattr__(self, name):
         adefaults = {
             'norepo': True,
             'intents': set(),
             'optionalrepo': False,
             'inferrepo': False,
         }
         if name not in adefaults:
             raise AttributeError(name)
         if self.badalias or util.safehasattr(self, b'shell'):
             return adefaults[name]
         return getattr(self.fn, name)
 
     def __call__(self, ui, *args, **opts):
         if self.badalias:
             hint = None
             if self.unknowncmd:
                 try:
                     # check if the command is in a disabled extension
                     cmd, ext = extensions.disabledcmd(ui, self.cmdname)[:2]
                     hint = _(b"'%s' is provided by '%s' extension") % (cmd, ext)
                 except error.UnknownCommand:
                     pass
             raise error.ConfigError(self.badalias, hint=hint)
         if self.shadows:
             ui.debug(
                 b"alias '%s' shadows command '%s'\n" % (self.name, self.cmdname)
             )
 
         ui.log(
             b'commandalias',
             b"alias '%s' expands to '%s'\n",
             self.name,
             self.definition,
         )
         if util.safehasattr(self, b'shell'):
             return self.fn(ui, *args, **opts)
         else:
             try:
                 return util.checksignature(self.fn)(ui, *args, **opts)
             except error.SignatureError:
                 args = b' '.join([self.cmdname] + self.args)
                 ui.debug(b"alias '%s' expands to '%s'\n" % (self.name, args))
                 raise
 
 
 class lazyaliasentry(object):
     """like a typical command entry (func, opts, help), but is lazy"""
 
     def __init__(self, ui, name, definition, cmdtable, source):
         self.ui = ui
         self.name = name
         self.definition = definition
         self.cmdtable = cmdtable.copy()
         self.source = source
         self.alias = True
 
     @util.propertycache
     def _aliasdef(self):
         return cmdalias(
             self.ui, self.name, self.definition, self.cmdtable, self.source
         )
 
     def __getitem__(self, n):
         aliasdef = self._aliasdef
         if n == 0:
             return aliasdef
         elif n == 1:
             return aliasdef.opts
         elif n == 2:
             return aliasdef.help
         else:
             raise IndexError
 
     def __iter__(self):
         for i in range(3):
             yield self[i]
 
     def __len__(self):
         return 3
 
 
 def addaliases(ui, cmdtable):
     # aliases are processed after extensions have been loaded, so they
     # may use extension commands. Aliases can also use other alias definitions,
     # but only if they have been defined prior to the current definition.
     for alias, definition in ui.configitems(b'alias', ignoresub=True):
         try:
             if cmdtable[alias].definition == definition:
                 continue
         except (KeyError, AttributeError):
             # definition might not exist or it might not be a cmdalias
             pass
 
         source = ui.configsource(b'alias', alias)
         entry = lazyaliasentry(ui, alias, definition, cmdtable, source)
         cmdtable[alias] = entry
 
 
 def _parse(ui, args):
     options = {}
     cmdoptions = {}
 
     try:
         args = fancyopts.fancyopts(args, commands.globalopts, options)
     except getopt.GetoptError as inst:
         raise error.CommandError(None, stringutil.forcebytestr(inst))
 
     if args:
         cmd, args = args[0], args[1:]
         aliases, entry = cmdutil.findcmd(
             cmd, commands.table, ui.configbool(b"ui", b"strict")
         )
         cmd = aliases[0]
         args = aliasargs(entry[0], args)
         defaults = ui.config(b"defaults", cmd)
         if defaults:
             args = (
                 pycompat.maplist(util.expandpath, pycompat.shlexsplit(defaults))
                 + args
             )
         c = list(entry[1])
     else:
         cmd = None
         c = []
 
     # combine global options into local
     for o in commands.globalopts:
         c.append((o[0], o[1], options[o[1]], o[3]))
 
     try:
         args = fancyopts.fancyopts(args, c, cmdoptions, gnu=True)
     except getopt.GetoptError as inst:
         raise error.CommandError(cmd, stringutil.forcebytestr(inst))
 
     # separate global options back out
     for o in commands.globalopts:
         n = o[1]
         options[n] = cmdoptions[n]
         del cmdoptions[n]
 
     return (cmd, cmd and entry[0] or None, args, options, cmdoptions)
 
 
 def _parseconfig(ui, config):
     """parse the --config options from the command line"""
     configs = []
 
     for cfg in config:
         try:
             name, value = [cfgelem.strip() for cfgelem in cfg.split(b'=', 1)]
             section, name = name.split(b'.', 1)
             if not section or not name:
                 raise IndexError
             ui.setconfig(section, name, value, b'--config')
             configs.append((section, name, value))
         except (IndexError, ValueError):
             raise error.InputError(
                 _(
                     b'malformed --config option: %r '
                     b'(use --config section.name=value)'
                 )
                 % pycompat.bytestr(cfg)
             )
 
     return configs
 
 
 def _earlyparseopts(ui, args):
     options = {}
     fancyopts.fancyopts(
         args,
         commands.globalopts,
         options,
         gnu=not ui.plain(b'strictflags'),
         early=True,
         optaliases={b'repository': [b'repo']},
     )
     return options
 
 
 def _earlysplitopts(args):
     """Split args into a list of possible early options and remainder args"""
     shortoptions = b'R:'
     # TODO: perhaps 'debugger' should be included
     longoptions = [b'cwd=', b'repository=', b'repo=', b'config=']
     return fancyopts.earlygetopt(
         args, shortoptions, longoptions, gnu=True, keepsep=True
     )
 
 
 def runcommand(lui, repo, cmd, fullargs, ui, options, d, cmdpats, cmdoptions):
     # run pre-hook, and abort if it fails
     hook.hook(
         lui,
         repo,
         b"pre-%s" % cmd,
         True,
         args=b" ".join(fullargs),
         pats=cmdpats,
         opts=cmdoptions,
     )
     try:
         ret = _runcommand(ui, options, cmd, d)
         # run post-hook, passing command result
         hook.hook(
             lui,
             repo,
             b"post-%s" % cmd,
             False,
             args=b" ".join(fullargs),
             result=ret,
             pats=cmdpats,
             opts=cmdoptions,
         )
     except Exception:
         # run failure hook and re-raise
         hook.hook(
             lui,
             repo,
             b"fail-%s" % cmd,
             False,
             args=b" ".join(fullargs),
             pats=cmdpats,
             opts=cmdoptions,
         )
         raise
     return ret
 
 
 def _readsharedsourceconfig(ui, path):
     """if the current repository is shared one, this tries to read
     .hg/hgrc of shared source if we are in share-safe mode
 
     Config read is loaded into the ui object passed
 
     This should be called before reading .hg/hgrc or the main repo
     as that overrides config set in shared source"""
     try:
         with open(os.path.join(path, b".hg", b"requires"), "rb") as fp:
             requirements = set(fp.read().splitlines())
             if not (
                 requirementsmod.SHARESAFE_REQUIREMENT in requirements
                 and requirementsmod.SHARED_REQUIREMENT in requirements
             ):
                 return
             hgvfs = vfs.vfs(os.path.join(path, b".hg"))
             sharedvfs = localrepo._getsharedvfs(hgvfs, requirements)
             root = sharedvfs.base
             ui.readconfig(sharedvfs.join(b"hgrc"), root)
     except IOError:
         pass
 
 
 def _getlocal(ui, rpath, wd=None):
     """Return (path, local ui object) for the given target path.
 
     Takes paths in [cwd]/.hg/hgrc into account."
     """
     if wd is None:
         try:
             wd = encoding.getcwd()
         except OSError as e:
             raise error.Abort(
                 _(b"error getting current working directory: %s")
                 % encoding.strtolocal(e.strerror)
             )
 
     path = cmdutil.findrepo(wd) or b""
     if not path:
         lui = ui
     else:
         lui = ui.copy()
         if rcutil.use_repo_hgrc():
             _readsharedsourceconfig(lui, path)
             lui.readconfig(os.path.join(path, b".hg", b"hgrc"), path)
             lui.readconfig(os.path.join(path, b".hg", b"hgrc-not-shared"), path)
 
     if rpath:
         path = lui.expandpath(rpath)
         lui = ui.copy()
         if rcutil.use_repo_hgrc():
             _readsharedsourceconfig(lui, path)
             lui.readconfig(os.path.join(path, b".hg", b"hgrc"), path)
             lui.readconfig(os.path.join(path, b".hg", b"hgrc-not-shared"), path)
 
     return path, lui
 
 
 def _checkshellalias(lui, ui, args):
     """Return the function to run the shell alias, if it is required"""
     options = {}
 
     try:
         args = fancyopts.fancyopts(args, commands.globalopts, options)
     except getopt.GetoptError:
         return
 
     if not args:
         return
 
     cmdtable = commands.table
 
     cmd = args[0]
     try:
         strict = ui.configbool(b"ui", b"strict")
         aliases, entry = cmdutil.findcmd(cmd, cmdtable, strict)
     except (error.AmbiguousCommand, error.UnknownCommand):
         return
 
     cmd = aliases[0]
     fn = entry[0]
 
     if cmd and util.safehasattr(fn, b'shell'):
         # shell alias shouldn't receive early options which are consumed by hg
         _earlyopts, args = _earlysplitopts(args)
         d = lambda: fn(ui, *args[1:])
         return lambda: runcommand(
             lui, None, cmd, args[:1], ui, options, d, [], {}
         )
 
 
 def _dispatch(req):
     args = req.args
     ui = req.ui
 
     # check for cwd
     cwd = req.earlyoptions[b'cwd']
     if cwd:
         os.chdir(cwd)
 
     rpath = req.earlyoptions[b'repository']
     path, lui = _getlocal(ui, rpath)
 
     uis = {ui, lui}
 
     if req.repo:
         uis.add(req.repo.ui)
 
     if (
         req.earlyoptions[b'verbose']
         or req.earlyoptions[b'debug']
         or req.earlyoptions[b'quiet']
     ):
         for opt in (b'verbose', b'debug', b'quiet'):
             val = pycompat.bytestr(bool(req.earlyoptions[opt]))
             for ui_ in uis:
                 ui_.setconfig(b'ui', opt, val, b'--' + opt)
 
     if req.earlyoptions[b'profile']:
         for ui_ in uis:
             ui_.setconfig(b'profiling', b'enabled', b'true', b'--profile')
 
     profile = lui.configbool(b'profiling', b'enabled')
     with profiling.profile(lui, enabled=profile) as profiler:
         # Configure extensions in phases: uisetup, extsetup, cmdtable, and
         # reposetup
         extensions.loadall(lui)
         # Propagate any changes to lui.__class__ by extensions
         ui.__class__ = lui.__class__
 
         # (uisetup and extsetup are handled in extensions.loadall)
 
         # (reposetup is handled in hg.repository)
 
         addaliases(lui, commands.table)
 
         # All aliases and commands are completely defined, now.
         # Check abbreviation/ambiguity of shell alias.
         shellaliasfn = _checkshellalias(lui, ui, args)
         if shellaliasfn:
             # no additional configs will be set, set up the ui instances
             for ui_ in uis:
                 extensions.populateui(ui_)
             return shellaliasfn()
 
         # check for fallback encoding
         fallback = lui.config(b'ui', b'fallbackencoding')
         if fallback:
             encoding.fallbackencoding = fallback
 
         fullargs = args
         cmd, func, args, options, cmdoptions = _parse(lui, args)
 
         # store the canonical command name in request object for later access
         req.canonical_command = cmd
 
         if options[b"config"] != req.earlyoptions[b"config"]:
             raise error.InputError(_(b"option --config may not be abbreviated"))
         if options[b"cwd"] != req.earlyoptions[b"cwd"]:
             raise error.InputError(_(b"option --cwd may not be abbreviated"))
         if options[b"repository"] != req.earlyoptions[b"repository"]:
             raise error.InputError(
                 _(
                     b"option -R has to be separated from other options (e.g. not "
                     b"-qR) and --repository may only be abbreviated as --repo"
                 )
             )
         if options[b"debugger"] != req.earlyoptions[b"debugger"]:
             raise error.InputError(
                 _(b"option --debugger may not be abbreviated")
             )
         # don't validate --profile/--traceback, which can be enabled from now
 
         if options[b"encoding"]:
             encoding.encoding = options[b"encoding"]
         if options[b"encodingmode"]:
             encoding.encodingmode = options[b"encodingmode"]
         if options[b"time"]:
 
             def get_times():
                 t = os.times()
                 if t[4] == 0.0:
                     # Windows leaves this as zero, so use time.perf_counter()
                     t = (t[0], t[1], t[2], t[3], util.timer())
                 return t
 
             s = get_times()
 
             def print_time():
                 t = get_times()
                 ui.warn(
                     _(b"time: real %.3f secs (user %.3f+%.3f sys %.3f+%.3f)\n")
                     % (
                         t[4] - s[4],
                         t[0] - s[0],
                         t[2] - s[2],
                         t[1] - s[1],
                         t[3] - s[3],
                     )
                 )
 
             ui.atexit(print_time)
         if options[b"profile"]:
             profiler.start()
 
         # if abbreviated version of this were used, take them in account, now
         if options[b'verbose'] or options[b'debug'] or options[b'quiet']:
             for opt in (b'verbose', b'debug', b'quiet'):
                 if options[opt] == req.earlyoptions[opt]:
                     continue
                 val = pycompat.bytestr(bool(options[opt]))
                 for ui_ in uis:
                     ui_.setconfig(b'ui', opt, val, b'--' + opt)
 
         if options[b'traceback']:
             for ui_ in uis:
                 ui_.setconfig(b'ui', b'traceback', b'on', b'--traceback')
 
         if options[b'noninteractive']:
             for ui_ in uis:
                 ui_.setconfig(b'ui', b'interactive', b'off', b'-y')
 
         if cmdoptions.get(b'insecure', False):
             for ui_ in uis:
                 ui_.insecureconnections = True
 
         # setup color handling before pager, because setting up pager
         # might cause incorrect console information
         coloropt = options[b'color']
         for ui_ in uis:
             if coloropt:
                 ui_.setconfig(b'ui', b'color', coloropt, b'--color')
             color.setup(ui_)
 
         if stringutil.parsebool(options[b'pager']):
             # ui.pager() expects 'internal-always-' prefix in this case
             ui.pager(b'internal-always-' + cmd)
         elif options[b'pager'] != b'auto':
             for ui_ in uis:
                 ui_.disablepager()
 
         # configs are fully loaded, set up the ui instances
         for ui_ in uis:
             extensions.populateui(ui_)
 
         if options[b'version']:
             return commands.version_(ui)
         if options[b'help']:
             return commands.help_(ui, cmd, command=cmd is not None)
         elif not cmd:
             return commands.help_(ui, b'shortlist')
 
         repo = None
         cmdpats = args[:]
         assert func is not None  # help out pytype
         if not func.norepo:
             # use the repo from the request only if we don't have -R
             if not rpath and not cwd:
                 repo = req.repo
 
             if repo:
                 # set the descriptors of the repo ui to those of ui
                 repo.ui.fin = ui.fin
                 repo.ui.fout = ui.fout
                 repo.ui.ferr = ui.ferr
                 repo.ui.fmsg = ui.fmsg
             else:
                 try:
                     repo = hg.repository(
                         ui,
                         path=path,
                         presetupfuncs=req.prereposetups,
                         intents=func.intents,
                     )
                     if not repo.local():
                         raise error.InputError(
                             _(b"repository '%s' is not local") % path
                         )
                     repo.ui.setconfig(
                         b"bundle", b"mainreporoot", repo.root, b'repo'
                     )
                 except error.RequirementError:
                     raise
                 except error.RepoError:
                     if rpath:  # invalid -R path
                         raise
                     if not func.optionalrepo:
                         if func.inferrepo and args and not path:
                             # try to infer -R from command args
                             repos = pycompat.maplist(cmdutil.findrepo, args)
                             guess = repos[0]
                             if guess and repos.count(guess) == len(repos):
                                 req.args = [b'--repository', guess] + fullargs
                                 req.earlyoptions[b'repository'] = guess
                                 return _dispatch(req)
                         if not path:
                             raise error.InputError(
                                 _(
                                     b"no repository found in"
                                     b" '%s' (.hg not found)"
                                 )
                                 % encoding.getcwd()
                             )
                         raise
             if repo:
                 ui = repo.ui
                 if options[b'hidden']:
                     repo = repo.unfiltered()
             args.insert(0, repo)
         elif rpath:
             ui.warn(_(b"warning: --repository ignored\n"))
 
         msg = _formatargs(fullargs)
         ui.log(b"command", b'%s\n', msg)
         strcmdopt = pycompat.strkwargs(cmdoptions)
         d = lambda: util.checksignature(func)(ui, *args, **strcmdopt)
         try:
             return runcommand(
                 lui, repo, cmd, fullargs, ui, options, d, cmdpats, cmdoptions
             )
         finally:
             if repo and repo != req.repo:
                 repo.close()
 
 
 def _runcommand(ui, options, cmd, cmdfunc):
     """Run a command function, possibly with profiling enabled."""
     try:
         with tracing.log("Running %s command" % cmd):
             return cmdfunc()
     except error.SignatureError:
         raise error.CommandError(cmd, _(b'invalid arguments'))
 
 
 def _exceptionwarning(ui):
     """Produce a warning message for the current active exception"""
 
     # For compatibility checking, we discard the portion of the hg
     # version after the + on the assumption that if a "normal
     # user" is running a build with a + in it the packager
     # probably built from fairly close to a tag and anyone with a
     # 'make local' copy of hg (where the version number can be out
     # of date) will be clueful enough to notice the implausible
     # version number and try updating.
     ct = util.versiontuple(n=2)
     worst = None, ct, b'', b''
     if ui.config(b'ui', b'supportcontact') is None:
         for name, mod in extensions.extensions():
             # 'testedwith' should be bytes, but not all extensions are ported
             # to py3 and we don't want UnicodeException because of that.
             testedwith = stringutil.forcebytestr(
                 getattr(mod, 'testedwith', b'')
             )
             version = extensions.moduleversion(mod)
             report = getattr(mod, 'buglink', _(b'the extension author.'))
             if not testedwith.strip():
                 # We found an untested extension. It's likely the culprit.
                 worst = name, b'unknown', report, version
                 break
 
             # Never blame on extensions bundled with Mercurial.
             if extensions.ismoduleinternal(mod):
                 continue
 
             tested = [util.versiontuple(t, 2) for t in testedwith.split()]
             if ct in tested:
                 continue
 
             lower = [t for t in tested if t < ct]
             nearest = max(lower or tested)
             if worst[0] is None or nearest < worst[1]:
                 worst = name, nearest, report, version
     if worst[0] is not None:
         name, testedwith, report, version = worst
         if not isinstance(testedwith, (bytes, str)):
             testedwith = b'.'.join(
                 [stringutil.forcebytestr(c) for c in testedwith]
             )
         extver = version or _(b"(version N/A)")
         warning = _(
             b'** Unknown exception encountered with '
             b'possibly-broken third-party extension "%s" %s\n'
             b'** which supports versions %s of Mercurial.\n'
             b'** Please disable "%s" and try your action again.\n'
             b'** If that fixes the bug please report it to %s\n'
         ) % (name, extver, testedwith, name, stringutil.forcebytestr(report))
     else:
         bugtracker = ui.config(b'ui', b'supportcontact')
         if bugtracker is None:
             bugtracker = _(b"https://mercurial-scm.org/wiki/BugTracker")
         warning = (
             _(
                 b"** unknown exception encountered, "
                 b"please report by visiting\n** "
             )
             + bugtracker
             + b'\n'
         )
     sysversion = pycompat.sysbytes(sys.version).replace(b'\n', b'')
 
     def ext_with_ver(x):
         ext = x[0]
         ver = extensions.moduleversion(x[1])
         if ver:
             ext += b' ' + ver
         return ext
 
     warning += (
         (_(b"** Python %s\n") % sysversion)
         + (_(b"** Mercurial Distributed SCM (version %s)\n") % util.version())
         + (
             _(b"** Extensions loaded: %s\n")
             % b", ".join(
                 [ext_with_ver(x) for x in sorted(extensions.extensions())]
             )
         )
     )
     return warning
 
 
 def handlecommandexception(ui):
     """Produce a warning message for broken commands
 
     Called when handling an exception; the exception is reraised if
     this function returns False, ignored otherwise.
     """
     warning = _exceptionwarning(ui)
     ui.log(
         b"commandexception",
         b"%s\n%s\n",
         warning,
         pycompat.sysbytes(traceback.format_exc()),
     )
     ui.warn(warning)
     return False  # re-raise the exception

tests/test-alias.t

@@ -1,722 +1,722 b''
   $ HGFOO=BAR; export HGFOO
   $ cat >> $HGRCPATH <<EOF
   > [alias]
   > # should clobber ci but not commit (issue2993)
   > ci = version
   > myinit = init
   > myinit:doc = This is my documented alias for init.
   > myinit:help = [OPTIONS] [BLA] [BLE]
   > mycommit = commit
   > mycommit:doc = This is my alias with only doc.
   > optionalrepo = showconfig alias.myinit
   > cleanstatus = status -c
   > cleanstatus:help = [ONLYHELPHERE]
   > unknown = bargle
   > ambiguous = s
   > recursive = recursive
   > disabled = email
   > nodefinition =
   > noclosingquotation = '
   > no--cwd = status --cwd elsewhere
   > no-R = status -R elsewhere
   > no--repo = status --repo elsewhere
   > no--repository = status --repository elsewhere
   > no--config = status --config a.config=1
   > mylog = log
   > lognull = log -r null
   > lognull:doc = Logs the null rev
   > lognull:help = foo bar baz
   > shortlog = log --template '{rev} {node|short} | {date|isodate}\n'
   > positional = log --template '{\$2} {\$1} | {date|isodate}\n'
   > dln = lognull --debug
   > recursivedoc = dln
   > recursivedoc:doc = Logs the null rev in debug mode
   > nousage = rollback
   > put = export -r 0 -o "\$FOO/%R.diff"
   > blank = !printf '\n'
   > self = !printf '\$0\n'
   > echoall = !printf '\$@\n'
   > echo1 = !printf '\$1\n'
   > echo2 = !printf '\$2\n'
   > echo13 = !printf '\$1 \$3\n'
   > echotokens = !printf "%s\n" "\$@"
   > count = !hg log -r "\$@" --template=. | wc -c | sed -e 's/ //g'
   > mcount = !hg log \$@ --template=. | wc -c | sed -e 's/ //g'
   > rt = root
   > tglog = log -G --template "{rev}:{node|short}: '{desc}' {branches}\n"
   > idalias = id
   > idaliaslong = id
   > idaliasshell = !echo test
   > parentsshell1 = !echo one
   > parentsshell2 = !echo two
   > escaped1 = !printf 'test\$\$test\n'
   > escaped2 = !sh -c 'echo "HGFOO is \$\$HGFOO"'
   > escaped3 = !sh -c 'echo "\$1 is \$\$\$1"'
   > escaped4 = !printf '\$\$0 \$\$@\n'
   > exit1 = !sh -c 'exit 1'
   > 
   > [defaults]
   > mylog = -q
   > lognull = -q
   > log = -v
   > EOF
 
 basic
 
   $ hg myinit alias
 
 help
 
   $ hg help -c | grep myinit
    myinit       This is my documented alias for init.
   $ hg help -c | grep mycommit
    mycommit     This is my alias with only doc.
   $ hg help -c | grep cleanstatus
   [1]
   $ hg help -c | grep lognull
    lognull      Logs the null rev
   $ hg help -c | grep dln
   [1]
   $ hg help -c | grep recursivedoc
    recursivedoc Logs the null rev in debug mode
   $ hg help myinit
   hg myinit [OPTIONS] [BLA] [BLE]
   
   alias for: hg init
   
   This is my documented alias for init.
   
   defined by: * (glob)
   */* (glob) (?)
   */* (glob) (?)
   */* (glob) (?)
   
   options:
   
    -e --ssh CMD       specify ssh command to use
       --remotecmd CMD specify hg command to run on the remote side
       --insecure      do not verify server certificate (ignoring web.cacerts
                       config)
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help mycommit
   hg mycommit [OPTION]... [FILE]...
   
   alias for: hg commit
   
   This is my alias with only doc.
   
   defined by: * (glob)
   */* (glob) (?)
   */* (glob) (?)
   */* (glob) (?)
   
   options ([+] can be repeated):
   
    -A --addremove           mark new/missing files as added/removed before
                             committing
       --close-branch        mark a branch head as closed
       --amend               amend the parent of the working directory
    -s --secret              use the secret phase for committing
    -e --edit                invoke editor on commit messages
    -i --interactive         use interactive mode
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -m --message TEXT        use text as commit message
    -l --logfile FILE        read commit message from file
    -d --date DATE           record the specified date as commit date
    -u --user USER           record the specified user as committer
    -S --subrepos            recurse into subrepositories
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help cleanstatus
   hg cleanstatus [ONLYHELPHERE]
   
   alias for: hg status -c
   
   show changed files in the working directory
   
       Show status of files in the repository. If names are given, only files
       that match are shown. Files that are clean or ignored or the source of a
       copy/move operation, are not listed unless -c/--clean, -i/--ignored,
       -C/--copies or -A/--all are given. Unless options described with "show
       only ..." are given, the options -mardu are used.
   
       Option -q/--quiet hides untracked (unknown and ignored) files unless
       explicitly requested with -u/--unknown or -i/--ignored.
   
       Note:
          'hg status' may appear to disagree with diff if permissions have
          changed or a merge has occurred. The standard diff format does not
          report permission changes and diff only reports changes relative to one
          merge parent.
   
       If one revision is given, it is used as the base revision. If two
       revisions are given, the differences between them are shown. The --change
       option can also be used as a shortcut to list the changed files of a
       revision from its first parent.
   
       The codes used to show the status of files are:
   
         M = modified
         A = added
         R = removed
         C = clean
         ! = missing (deleted by non-hg command, but still tracked)
         ? = not tracked
         I = ignored
           = origin of the previous file (with --copies)
   
       Returns 0 on success.
   
   defined by: * (glob)
   */* (glob) (?)
   */* (glob) (?)
   */* (glob) (?)
   
   options ([+] can be repeated):
   
    -A --all                 show status of all files
    -m --modified            show only modified files
    -a --added               show only added files
    -r --removed             show only removed files
    -d --deleted             show only missing files
    -c --clean               show only files without changes
    -u --unknown             show only unknown (not tracked) files
    -i --ignored             show only ignored files
    -n --no-status           hide status prefix
    -C --copies              show source of copied files
    -0 --print0              end filenames with NUL, for use with xargs
       --rev REV [+]         show difference from revision
       --change REV          list the changed files of a revision
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -T --template TEMPLATE   display with template
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help recursivedoc | head -n 5
   hg recursivedoc foo bar baz
   
   alias for: hg dln
   
   Logs the null rev in debug mode
 
 unknown
 
   $ hg unknown
   config error: alias 'unknown' resolves to unknown command 'bargle'
   [30]
   $ hg help unknown
   alias 'unknown' resolves to unknown command 'bargle'
 
 
 ambiguous
 
   $ hg ambiguous
   config error: alias 'ambiguous' resolves to ambiguous command 's'
   [30]
   $ hg help ambiguous
   alias 'ambiguous' resolves to ambiguous command 's'
 
 
 recursive
 
   $ hg recursive
   config error: alias 'recursive' resolves to unknown command 'recursive'
   [30]
   $ hg help recursive
   alias 'recursive' resolves to unknown command 'recursive'
 
 
 disabled
 
   $ hg disabled
   config error: alias 'disabled' resolves to unknown command 'email'
   ('email' is provided by 'patchbomb' extension)
   [30]
   $ hg help disabled
   alias 'disabled' resolves to unknown command 'email'
   
   'email' is provided by the following extension:
   
       patchbomb     command to send changesets as (a series of) patch emails
   
   (use 'hg help extensions' for information on enabling extensions)
 
 
 no definition
 
   $ hg nodef
   config error: no definition for alias 'nodefinition'
   [30]
   $ hg help nodef
   no definition for alias 'nodefinition'
 
 
 no closing quotation
 
   $ hg noclosing
   config error: error in definition for alias 'noclosingquotation': No closing quotation
   [30]
   $ hg help noclosing
   error in definition for alias 'noclosingquotation': No closing quotation
 
 "--" in alias definition should be preserved
 
   $ hg --config alias.dash='cat --' -R alias dash -r0
   abort: -r0 not under root '$TESTTMP/alias'
   (consider using '--cwd alias')
   [255]
 
 invalid options
 
   $ hg no--cwd
   config error: error in definition for alias 'no--cwd': --cwd may only be given on the command line
   [30]
   $ hg help no--cwd
   error in definition for alias 'no--cwd': --cwd may only be given on the
   command line
   $ hg no-R
   config error: error in definition for alias 'no-R': -R may only be given on the command line
   [30]
   $ hg help no-R
   error in definition for alias 'no-R': -R may only be given on the command line
   $ hg no--repo
   config error: error in definition for alias 'no--repo': --repo may only be given on the command line
   [30]
   $ hg help no--repo
   error in definition for alias 'no--repo': --repo may only be given on the
   command line
   $ hg no--repository
   config error: error in definition for alias 'no--repository': --repository may only be given on the command line
   [30]
   $ hg help no--repository
   error in definition for alias 'no--repository': --repository may only be given
   on the command line
   $ hg no--config
   config error: error in definition for alias 'no--config': --config may only be given on the command line
   [30]
   $ hg no --config alias.no='--repo elsewhere --cwd elsewhere status'
   config error: error in definition for alias 'no': --repo/--cwd may only be given on the command line
   [30]
   $ hg no --config alias.no='--repo elsewhere'
   config error: error in definition for alias 'no': --repo may only be given on the command line
   [30]
 
 optional repository
 
 #if no-outer-repo
   $ hg optionalrepo
   init
 #endif
   $ cd alias
   $ cat > .hg/hgrc <<EOF
   > [alias]
   > myinit = init -q
   > EOF
   $ hg optionalrepo
   init -q
 
 no usage
 
   $ hg nousage
   no rollback information available
   [1]
 
   $ echo foo > foo
   $ hg commit -Amfoo
   adding foo
 
 infer repository
 
   $ cd ..
 
 #if no-outer-repo
   $ hg shortlog alias/foo
   0 e63c23eaa88a | 1970-01-01 00:00 +0000
 #endif
 
   $ cd alias
 
 with opts
 
   $ hg cleanst
   C foo
 
 
 with opts and whitespace
 
   $ hg shortlog
   0 e63c23eaa88a | 1970-01-01 00:00 +0000
 
 positional arguments
 
   $ hg positional
   abort: too few arguments for command alias
   [10]
   $ hg positional a
   abort: too few arguments for command alias
   [10]
   $ hg positional 'node|short' rev
   0 e63c23eaa88a | 1970-01-01 00:00 +0000
 
 interaction with defaults
 
   $ hg mylog
   0:e63c23eaa88a
   $ hg lognull
   -1:000000000000
 
 
 properly recursive
 
   $ hg dln
   changeset:   -1:0000000000000000000000000000000000000000
   phase:       public
   parent:      -1:0000000000000000000000000000000000000000
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    -1:0000000000000000000000000000000000000000
   user:        
   date:        Thu Jan 01 00:00:00 1970 +0000
   extra:       branch=default
   
 
 
 path expanding
 
   $ FOO=`pwd` hg put
   $ cat 0.diff
   # HG changeset patch
   # User test
   # Date 0 0
   #      Thu Jan 01 00:00:00 1970 +0000
   # Node ID e63c23eaa88ae77967edcf4ea194d31167c478b0
   # Parent  0000000000000000000000000000000000000000
   foo
   
   diff -r 000000000000 -r e63c23eaa88a foo
   --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
   +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
   @@ -0,0 +1,1 @@
   +foo
 
 
 simple shell aliases
 
   $ hg blank
   
   $ hg blank foo
   
   $ hg self
   self
   $ hg echoall
   
   $ hg echoall foo
   foo
   $ hg echoall 'test $2' foo
   test $2 foo
   $ hg echoall 'test $@' foo '$@'
   test $@ foo $@
   $ hg echoall 'test "$@"' foo '"$@"'
   test "$@" foo "$@"
   $ hg echo1 foo bar baz
   foo
   $ hg echo2 foo bar baz
   bar
   $ hg echo13 foo bar baz test
   foo baz
   $ hg echo2 foo
   
   $ hg echotokens
   
   $ hg echotokens foo 'bar $1 baz'
   foo
   bar $1 baz
   $ hg echotokens 'test $2' foo
   test $2
   foo
   $ hg echotokens 'test $@' foo '$@'
   test $@
   foo
   $@
   $ hg echotokens 'test "$@"' foo '"$@"'
   test "$@"
   foo
   "$@"
   $ echo bar > bar
   $ hg commit -qA -m bar
   $ hg count .
   1
   $ hg count 'branch(default)'
   2
   $ hg mcount -r '"branch(default)"'
   2
 
   $ hg tglog
   @  1:042423737847: 'bar'
   |
   o  0:e63c23eaa88a: 'foo'
   
 
 
 shadowing
 
   $ hg i
   hg: command 'i' is ambiguous:
       idalias idaliaslong idaliasshell identify import incoming init
-  [255]
+  [10]
   $ hg id
   042423737847 tip
   $ hg ida
   hg: command 'ida' is ambiguous:
       idalias idaliaslong idaliasshell
-  [255]
+  [10]
   $ hg idalias
   042423737847 tip
   $ hg idaliasl
   042423737847 tip
   $ hg idaliass
   test
   $ hg parentsshell
   hg: command 'parentsshell' is ambiguous:
       parentsshell1 parentsshell2
-  [255]
+  [10]
   $ hg parentsshell1
   one
   $ hg parentsshell2
   two
 
 
 shell aliases with global options
 
   $ hg init sub
   $ cd sub
   $ hg count 'branch(default)'
   abort: unknown revision 'default'
   0
   $ hg -v count 'branch(default)'
   abort: unknown revision 'default'
   0
   $ hg -R .. count 'branch(default)'
   abort: unknown revision 'default'
   0
   $ hg --cwd .. count 'branch(default)'
   2
   $ hg echoall --cwd ..
   
 
 "--" passed to shell alias should be preserved
 
   $ hg --config alias.printf='!printf "$@"' printf '%s %s %s\n' -- --cwd ..
   -- --cwd ..
 
 repo specific shell aliases
 
   $ cat >> .hg/hgrc <<EOF
   > [alias]
   > subalias = !echo sub
   > EOF
   $ cat >> ../.hg/hgrc <<EOF
   > [alias]
   > mainalias = !echo main
   > EOF
 
 
 shell alias defined in current repo
 
   $ hg subalias
   sub
   $ hg --cwd .. subalias > /dev/null
   hg: unknown command 'subalias'
   (did you mean idalias?)
-  [255]
+  [10]
   $ hg -R .. subalias > /dev/null
   hg: unknown command 'subalias'
   (did you mean idalias?)
-  [255]
+  [10]
 
 
 shell alias defined in other repo
 
   $ hg mainalias > /dev/null
   hg: unknown command 'mainalias'
   (did you mean idalias?)
-  [255]
+  [10]
   $ hg -R .. mainalias
   main
   $ hg --cwd .. mainalias
   main
 
 typos get useful suggestions
   $ hg --cwd .. manalias
   hg: unknown command 'manalias'
   (did you mean one of idalias, mainalias, manifest?)
-  [255]
+  [10]
 
 shell aliases with escaped $ chars
 
   $ hg escaped1
   test$test
   $ hg escaped2
   HGFOO is BAR
   $ hg escaped3 HGFOO
   HGFOO is BAR
   $ hg escaped4 test
   $0 $@
 
 abbreviated name, which matches against both shell alias and the
 command provided extension, should be aborted.
 
   $ cat >> .hg/hgrc <<EOF
   > [extensions]
   > hgext.rebase =
   > EOF
 #if windows
   $ cat >> .hg/hgrc <<EOF
   > [alias]
   > rebate = !echo this is %HG_ARGS%
   > EOF
 #else
   $ cat >> .hg/hgrc <<EOF
   > [alias]
   > rebate = !echo this is \$HG_ARGS
   > EOF
 #endif
   $ cat >> .hg/hgrc <<EOF
   > rebate:doc = This is my alias which just prints something.
   > rebate:help = [MYARGS]
   > EOF
   $ hg reba
   hg: command 'reba' is ambiguous:
       rebase rebate
-  [255]
+  [10]
   $ hg rebat
   this is rebate
   $ hg rebat --foo-bar
   this is rebate --foo-bar
 
 help for a shell alias
 
   $ hg help -c | grep rebate
    rebate       This is my alias which just prints something.
   $ hg help rebate
   hg rebate [MYARGS]
   
   shell alias for: echo this is %HG_ARGS% (windows !)
   shell alias for: echo this is $HG_ARGS (no-windows !)
   
   This is my alias which just prints something.
   
   defined by:* (glob)
   */* (glob) (?)
   */* (glob) (?)
   */* (glob) (?)
   
   (some details hidden, use --verbose to show complete help)
 
 invalid character in user-specified help
 
   >>> with open('.hg/hgrc', 'ab') as f:
   ...     f.write(b'[alias]\n'
   ...             b'invaliddoc = log\n'
   ...             b'invaliddoc:doc = \xc3\xa9\n'
   ...             b'invalidhelp = log\n'
   ...             b'invalidhelp:help = \xc3\xa9\n') and None
   $ hg help invaliddoc
   non-ASCII character in alias definition 'invaliddoc:doc'
   $ hg help invalidhelp
   non-ASCII character in alias definition 'invalidhelp:help'
   $ hg invaliddoc
   config error: non-ASCII character in alias definition 'invaliddoc:doc'
   [30]
   $ hg invalidhelp
   config error: non-ASCII character in alias definition 'invalidhelp:help'
   [30]
 
 invalid arguments
 
   $ hg rt foo
   hg rt: invalid arguments
   hg rt
   
   alias for: hg root
   
   options:
   
    -T --template TEMPLATE display with template
   
   (use 'hg rt -h' to show more help)
-  [255]
+  [10]
 
 invalid global arguments for normal commands, aliases, and shell aliases
 
   $ hg --invalid root
   hg: option --invalid not recognized
   (use 'hg help -v' for a list of global options)
-  [255]
+  [10]
   $ hg --invalid mylog
   hg: option --invalid not recognized
   (use 'hg help -v' for a list of global options)
-  [255]
+  [10]
   $ hg --invalid blank
   hg: option --invalid not recognized
   (use 'hg help -v' for a list of global options)
-  [255]
+  [10]
 
 environment variable changes in alias commands
 
   $ cat > $TESTTMP/expandalias.py <<EOF
   > import os
   > from mercurial import cmdutil, commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'expandalias')
   > def expandalias(ui, repo, name):
   >     alias = cmdutil.findcmd(name, commands.table)[1][0]
   >     ui.write(b'%s args: %s\n' % (name, b' '.join(alias.args)))
   >     os.environ['COUNT'] = '2'
   >     ui.write(b'%s args: %s (with COUNT=2)\n' % (name, b' '.join(alias.args)))
   > EOF
 
   $ cat >> $HGRCPATH <<'EOF'
   > [extensions]
   > expandalias = $TESTTMP/expandalias.py
   > [alias]
   > showcount = log -T "$COUNT" -r .
   > EOF
 
   $ COUNT=1 hg expandalias showcount
   showcount args: -T 1 -r .
   showcount args: -T 2 -r . (with COUNT=2)
 
 This should show id:
 
   $ hg --config alias.log='id' log
   000000000000 tip
 
 This shouldn't:
 
   $ hg --config alias.log='id' history
 
   $ cd ../..
 
 return code of command and shell aliases:
 
   $ hg mycommit -R alias
   nothing changed
   [1]
   $ hg exit1
   [1]
 
 #if no-outer-repo
   $ hg root
   abort: no repository found in '$TESTTMP' (.hg not found)
   [10]
   $ hg --config alias.hgroot='!hg root' hgroot
   abort: no repository found in '$TESTTMP' (.hg not found)
   [10]
 #endif

tests/test-basic.t

@@ -1,254 +1,254 b''
 Create a repository:
 
 #if no-extraextensions
   $ hg config
   devel.all-warnings=true
   devel.default-date=0 0
   extensions.fsmonitor= (fsmonitor !)
   largefiles.usercache=$TESTTMP/.cache/largefiles
   lfs.usercache=$TESTTMP/.cache/lfs
   ui.slash=True
   ui.interactive=False
   ui.detailed-exit-code=True
   ui.merge=internal:merge
   ui.mergemarkers=detailed
   ui.promptecho=True
   ui.timeout.warn=15
   web.address=localhost
   web\.ipv6=(?:True|False) (re)
   web.server-header=testing stub value
 #endif
 
   $ hg init t
   $ cd t
 
 Prepare a changeset:
 
   $ echo a > a
   $ hg add a
 
   $ hg status
   A a
 
 Writes to stdio succeed and fail appropriately
 
 #if devfull
   $ hg status 2>/dev/full
   A a
 
   $ hg status >/dev/full
   abort: No space left on device
   [255]
 #endif
 
 #if devfull
   $ hg status >/dev/full 2>&1
   [255]
 
   $ hg status ENOENT 2>/dev/full
   [255]
 #endif
 
 On Python 3, stdio may be None:
 
   $ hg debuguiprompt --config ui.interactive=true 0<&-
    abort: Bad file descriptor
   [255]
   $ hg version -q 0<&-
   Mercurial Distributed SCM * (glob)
 
 #if py3
   $ hg version -q 1>&-
   abort: Bad file descriptor
   [255]
 #else
   $ hg version -q 1>&-
 #endif
   $ hg unknown -q 1>&-
   hg: unknown command 'unknown'
   (did you mean debugknown?)
-  [255]
+  [10]
 
   $ hg version -q 2>&-
   Mercurial Distributed SCM * (glob)
   $ hg unknown -q 2>&-
-  [255]
+  [10]
 
   $ hg commit -m test
 
 This command is ancient:
 
   $ hg history
   changeset:   0:acb14030fe0a
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     test
   
 
 Verify that updating to revision 0 via commands.update() works properly
 
   $ cat <<EOF > update_to_rev0.py
   > from mercurial import commands, hg, ui as uimod
   > myui = uimod.ui.load()
   > repo = hg.repository(myui, path=b'.')
   > commands.update(myui, repo, rev=b"0")
   > EOF
   $ hg up null
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ "$PYTHON" ./update_to_rev0.py
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg identify -n
   0
 
 
 Poke around at hashes:
 
   $ hg manifest --debug
   b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 644   a
 
   $ hg cat a
   a
 
 Verify should succeed:
 
   $ hg verify
   checking changesets
   checking manifests
   crosschecking files in changesets and manifests
   checking files
   checked 1 changesets with 1 changes to 1 files
 
 Repository root:
 
   $ hg root
   $TESTTMP/t
   $ hg log -l1 -T '{reporoot}\n'
   $TESTTMP/t
   $ hg root -Tjson | sed 's|\\\\|\\|g'
   [
    {
     "hgpath": "$TESTTMP/t/.hg",
     "reporoot": "$TESTTMP/t",
     "storepath": "$TESTTMP/t/.hg/store"
    }
   ]
 
 At the end...
 
   $ cd ..
 
 Status message redirection:
 
   $ hg init empty
 
  status messages are sent to stdout by default:
 
   $ hg outgoing -R t empty -Tjson 2>/dev/null
   comparing with empty
   searching for changes
   [
    {
     "bookmarks": [],
     "branch": "default",
     "date": [0, 0],
     "desc": "test",
     "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
     "parents": ["0000000000000000000000000000000000000000"],
     "phase": "draft",
     "rev": 0,
     "tags": ["tip"],
     "user": "test"
    }
   ]
 
  which can be configured to send to stderr, so the output wouldn't be
  interleaved:
 
   $ cat <<'EOF' >> "$HGRCPATH"
   > [ui]
   > message-output = stderr
   > EOF
   $ hg outgoing -R t empty -Tjson 2>/dev/null
   [
    {
     "bookmarks": [],
     "branch": "default",
     "date": [0, 0],
     "desc": "test",
     "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
     "parents": ["0000000000000000000000000000000000000000"],
     "phase": "draft",
     "rev": 0,
     "tags": ["tip"],
     "user": "test"
    }
   ]
   $ hg outgoing -R t empty -Tjson >/dev/null
   comparing with empty
   searching for changes
 
  this option should be turned off by HGPLAIN= since it may break scripting use:
 
   $ HGPLAIN= hg outgoing -R t empty -Tjson 2>/dev/null
   comparing with empty
   searching for changes
   [
    {
     "bookmarks": [],
     "branch": "default",
     "date": [0, 0],
     "desc": "test",
     "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
     "parents": ["0000000000000000000000000000000000000000"],
     "phase": "draft",
     "rev": 0,
     "tags": ["tip"],
     "user": "test"
    }
   ]
 
  but still overridden by --config:
 
   $ HGPLAIN= hg outgoing -R t empty -Tjson --config ui.message-output=stderr \
   > 2>/dev/null
   [
    {
     "bookmarks": [],
     "branch": "default",
     "date": [0, 0],
     "desc": "test",
     "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
     "parents": ["0000000000000000000000000000000000000000"],
     "phase": "draft",
     "rev": 0,
     "tags": ["tip"],
     "user": "test"
    }
   ]
 
 Invalid ui.message-output option:
 
   $ hg log -R t --config ui.message-output=bad
   abort: invalid ui.message-output destination: bad
   [255]
 
 Underlying message streams should be updated when ui.fout/ferr are set:
 
   $ cat <<'EOF' > capui.py
   > from mercurial import pycompat, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'capui', norepo=True)
   > def capui(ui):
   >     out = ui.fout
   >     ui.fout = pycompat.bytesio()
   >     ui.status(b'status\n')
   >     ui.ferr = pycompat.bytesio()
   >     ui.warn(b'warn\n')
   >     out.write(b'stdout: %s' % ui.fout.getvalue())
   >     out.write(b'stderr: %s' % ui.ferr.getvalue())
   > EOF
   $ hg --config extensions.capui=capui.py --config ui.message-output=stdio capui
   stdout: status
   stderr: warn

tests/test-completion.t

@@ -1,439 +1,439 b''
 Show all commands except debug commands
   $ hg debugcomplete
   abort
   add
   addremove
   annotate
   archive
   backout
   bisect
   bookmarks
   branch
   branches
   bundle
   cat
   clone
   commit
   config
   continue
   copy
   diff
   export
   files
   forget
   graft
   grep
   heads
   help
   identify
   import
   incoming
   init
   locate
   log
   manifest
   merge
   outgoing
   parents
   paths
   phase
   pull
   push
   recover
   remove
   rename
   resolve
   revert
   rollback
   root
   serve
   shelve
   status
   summary
   tag
   tags
   tip
   unbundle
   unshelve
   update
   verify
   version
 
 Show all commands that start with "a"
   $ hg debugcomplete a
   abort
   add
   addremove
   annotate
   archive
 
 Do not show debug commands if there are other candidates
   $ hg debugcomplete d
   diff
 
 Show debug commands if there are no other candidates
   $ hg debugcomplete debug
   debugancestor
   debugantivirusrunning
   debugapplystreamclonebundle
   debugbackupbundle
   debugbuilddag
   debugbundle
   debugcapabilities
   debugchangedfiles
   debugcheckstate
   debugcolor
   debugcommands
   debugcomplete
   debugconfig
   debugcreatestreamclonebundle
   debugdag
   debugdata
   debugdate
   debugdeltachain
   debugdirstate
   debugdiscovery
   debugdownload
   debugextensions
   debugfileset
   debugformat
   debugfsinfo
   debuggetbundle
   debugignore
   debugindex
   debugindexdot
   debugindexstats
   debuginstall
   debugknown
   debuglabelcomplete
   debuglocks
   debugmanifestfulltextcache
   debugmergestate
   debugnamecomplete
   debugnodemap
   debugobsolete
   debugp1copies
   debugp2copies
   debugpathcomplete
   debugpathcopies
   debugpeer
   debugpickmergetool
   debugpushkey
   debugpvec
   debugrebuilddirstate
   debugrebuildfncache
   debugrename
   debugrequires
   debugrevlog
   debugrevlogindex
   debugrevspec
   debugserve
   debugsetparents
   debugsidedata
   debugssl
   debugstrip
   debugsub
   debugsuccessorssets
   debugtagscache
   debugtemplate
   debuguigetpass
   debuguiprompt
   debugupdatecaches
   debugupgraderepo
   debugwalk
   debugwhyunstable
   debugwireargs
   debugwireproto
 
 Do not show the alias of a debug command if there are other candidates
 (this should hide rawcommit)
   $ hg debugcomplete r
   recover
   remove
   rename
   resolve
   revert
   rollback
   root
 Show the alias of a debug command if there are no other candidates
   $ hg debugcomplete rawc
   
 
 Show the global options
   $ hg debugcomplete --options | sort
   --color
   --config
   --cwd
   --debug
   --debugger
   --encoding
   --encodingmode
   --help
   --hidden
   --noninteractive
   --pager
   --profile
   --quiet
   --repository
   --time
   --traceback
   --verbose
   --version
   -R
   -h
   -q
   -v
   -y
 
 Show the options for the "serve" command
   $ hg debugcomplete --options serve | sort
   --accesslog
   --address
   --certificate
   --cmdserver
   --color
   --config
   --cwd
   --daemon
   --daemon-postexec
   --debug
   --debugger
   --encoding
   --encodingmode
   --errorlog
   --help
   --hidden
   --ipv6
   --name
   --noninteractive
   --pager
   --pid-file
   --port
   --prefix
   --print-url
   --profile
   --quiet
   --repository
   --stdio
   --style
   --subrepos
   --templates
   --time
   --traceback
   --verbose
   --version
   --web-conf
   -6
   -A
   -E
   -R
   -S
   -a
   -d
   -h
   -n
   -p
   -q
   -t
   -v
   -y
 
 Show an error if we use --options with an ambiguous abbreviation
   $ hg debugcomplete --options s
   hg: command 's' is ambiguous:
       serve shelve showconfig status summary
-  [255]
+  [10]
 
 Show all commands + options
   $ hg debugcommands
   abort: dry-run
   add: include, exclude, subrepos, dry-run
   addremove: similarity, subrepos, include, exclude, dry-run
   annotate: rev, follow, no-follow, text, user, file, date, number, changeset, line-number, skip, ignore-all-space, ignore-space-change, ignore-blank-lines, ignore-space-at-eol, include, exclude, template
   archive: no-decode, prefix, rev, type, subrepos, include, exclude
   backout: merge, commit, no-commit, parent, rev, edit, tool, include, exclude, message, logfile, date, user
   bisect: reset, good, bad, skip, extend, command, noupdate
   bookmarks: force, rev, delete, rename, inactive, list, template
   branch: force, clean, rev
   branches: active, closed, rev, template
   bundle: force, rev, branch, base, all, type, ssh, remotecmd, insecure
   cat: output, rev, decode, include, exclude, template
   clone: noupdate, updaterev, rev, branch, pull, uncompressed, stream, ssh, remotecmd, insecure
   commit: addremove, close-branch, amend, secret, edit, force-close-branch, interactive, include, exclude, message, logfile, date, user, subrepos
   config: untrusted, edit, local, shared, non-shared, global, template
   continue: dry-run
   copy: forget, after, at-rev, force, include, exclude, dry-run
   debugancestor: 
   debugantivirusrunning: 
   debugapplystreamclonebundle: 
   debugbackupbundle: recover, patch, git, limit, no-merges, stat, graph, style, template
   debugbuilddag: mergeable-file, overwritten-file, new-file
   debugbundle: all, part-type, spec
   debugcapabilities: 
   debugchangedfiles: 
   debugcheckstate: 
   debugcolor: style
   debugcommands: 
   debugcomplete: options
   debugcreatestreamclonebundle: 
   debugdag: tags, branches, dots, spaces
   debugdata: changelog, manifest, dir
   debugdate: extended
   debugdeltachain: changelog, manifest, dir, template
   debugdirstate: nodates, dates, datesort
   debugdiscovery: old, nonheads, rev, seed, ssh, remotecmd, insecure
   debugdownload: output
   debugextensions: template
   debugfileset: rev, all-files, show-matcher, show-stage
   debugformat: template
   debugfsinfo: 
   debuggetbundle: head, common, type
   debugignore: 
   debugindex: changelog, manifest, dir, template
   debugindexdot: changelog, manifest, dir
   debugindexstats: 
   debuginstall: template
   debugknown: 
   debuglabelcomplete: 
   debuglocks: force-free-lock, force-free-wlock, set-lock, set-wlock
   debugmanifestfulltextcache: clear, add
   debugmergestate: style, template
   debugnamecomplete: 
   debugnodemap: dump-new, dump-disk, check, metadata
   debugobsolete: flags, record-parents, rev, exclusive, index, delete, date, user, template
   debugp1copies: rev
   debugp2copies: rev
   debugpathcomplete: full, normal, added, removed
   debugpathcopies: include, exclude
   debugpeer: 
   debugpickmergetool: rev, changedelete, include, exclude, tool
   debugpushkey: 
   debugpvec: 
   debugrebuilddirstate: rev, minimal
   debugrebuildfncache: 
   debugrename: rev
   debugrequires: 
   debugrevlog: changelog, manifest, dir, dump
   debugrevlogindex: changelog, manifest, dir, format
   debugrevspec: optimize, show-revs, show-set, show-stage, no-optimized, verify-optimized
   debugserve: sshstdio, logiofd, logiofile
   debugsetparents: 
   debugsidedata: changelog, manifest, dir
   debugssl: 
   debugstrip: rev, force, no-backup, nobackup, , keep, bookmark, soft
   debugsub: rev
   debugsuccessorssets: closest
   debugtagscache: 
   debugtemplate: rev, define
   debuguigetpass: prompt
   debuguiprompt: prompt
   debugupdatecaches: 
   debugupgraderepo: optimize, run, backup, changelog, manifest, filelogs
   debugwalk: include, exclude
   debugwhyunstable: 
   debugwireargs: three, four, five, ssh, remotecmd, insecure
   debugwireproto: localssh, peer, noreadstderr, nologhandshake, ssh, remotecmd, insecure
   diff: rev, from, to, change, text, git, binary, nodates, noprefix, show-function, reverse, ignore-all-space, ignore-space-change, ignore-blank-lines, ignore-space-at-eol, unified, stat, root, include, exclude, subrepos
   export: bookmark, output, switch-parent, rev, text, git, binary, nodates, template
   files: rev, print0, include, exclude, template, subrepos
   forget: interactive, include, exclude, dry-run
   graft: rev, base, continue, stop, abort, edit, log, no-commit, force, currentdate, currentuser, date, user, tool, dry-run
   grep: print0, all, diff, text, follow, ignore-case, files-with-matches, line-number, rev, all-files, user, date, template, include, exclude
   heads: rev, topo, active, closed, style, template
   help: extension, command, keyword, system
   identify: rev, num, id, branch, tags, bookmarks, ssh, remotecmd, insecure, template
   import: strip, base, secret, edit, force, no-commit, bypass, partial, exact, prefix, import-branch, message, logfile, date, user, similarity
   incoming: force, newest-first, bundle, rev, bookmarks, branch, patch, git, limit, no-merges, stat, graph, style, template, ssh, remotecmd, insecure, subrepos
   init: ssh, remotecmd, insecure
   locate: rev, print0, fullpath, include, exclude
   log: follow, follow-first, date, copies, keyword, rev, line-range, removed, only-merges, user, only-branch, branch, bookmark, prune, patch, git, limit, no-merges, stat, graph, style, template, include, exclude
   manifest: rev, all, template
   merge: force, rev, preview, abort, tool
   outgoing: force, rev, newest-first, bookmarks, branch, patch, git, limit, no-merges, stat, graph, style, template, ssh, remotecmd, insecure, subrepos
   parents: rev, style, template
   paths: template
   phase: public, draft, secret, force, rev
   pull: update, force, confirm, rev, bookmark, branch, ssh, remotecmd, insecure
   push: force, rev, bookmark, all-bookmarks, branch, new-branch, pushvars, publish, ssh, remotecmd, insecure
   recover: verify
   remove: after, force, subrepos, include, exclude, dry-run
   rename: after, at-rev, force, include, exclude, dry-run
   resolve: all, list, mark, unmark, no-status, re-merge, tool, include, exclude, template
   revert: all, date, rev, no-backup, interactive, include, exclude, dry-run
   rollback: dry-run, force
   root: template
   serve: accesslog, daemon, daemon-postexec, errorlog, port, address, prefix, name, web-conf, webdir-conf, pid-file, stdio, cmdserver, templates, style, ipv6, certificate, print-url, subrepos
   shelve: addremove, unknown, cleanup, date, delete, edit, keep, list, message, name, patch, interactive, stat, include, exclude
   status: all, modified, added, removed, deleted, clean, unknown, ignored, no-status, terse, copies, print0, rev, change, include, exclude, subrepos, template
   summary: remote
   tag: force, local, rev, remove, edit, message, date, user
   tags: template
   tip: patch, git, style, template
   unbundle: update
   unshelve: abort, continue, interactive, keep, name, tool, date
   update: clean, check, merge, date, rev, tool
   verify: full
   version: template
 
   $ hg init a
   $ cd a
   $ echo fee > fee
   $ hg ci -q -Amfee
   $ hg tag fee
   $ mkdir fie
   $ echo dead > fie/dead
   $ echo live > fie/live
   $ hg bookmark fo
   $ hg branch -q fie
   $ hg ci -q -Amfie
   $ echo fo > fo
   $ hg branch -qf default
   $ hg ci -q -Amfo
   $ echo Fum > Fum
   $ hg ci -q -AmFum
   $ hg bookmark Fum
 
 Test debugpathcomplete
 
   $ hg debugpathcomplete f
   fee
   fie
   fo
   $ hg debugpathcomplete -f f
   fee
   fie/dead
   fie/live
   fo
 
   $ hg rm Fum
   $ hg debugpathcomplete -r F
   Fum
 
 Test debugnamecomplete
 
   $ hg debugnamecomplete
   Fum
   default
   fee
   fie
   fo
   tip
   $ hg debugnamecomplete f
   fee
   fie
   fo
 
 Test debuglabelcomplete, a deprecated name for debugnamecomplete that is still
 used for completions in some shells.
 
   $ hg debuglabelcomplete
   Fum
   default
   fee
   fie
   fo
   tip
   $ hg debuglabelcomplete f
   fee
   fie
   fo

tests/test-dispatch.t

@@ -1,221 +1,221 b''
 test command parsing and dispatch
 
   $ hg init a
   $ cd a
 
 Redundant options used to crash (issue436):
   $ hg -v log -v
   $ hg -v log -v x
 
   $ echo a > a
   $ hg ci -Ama
   adding a
 
 Missing arg:
 
   $ hg cat
   hg cat: invalid arguments
   hg cat [OPTION]... FILE...
   
   output the current or given revision of files
   
   options ([+] can be repeated):
   
    -o --output FORMAT       print output to file with formatted name
    -r --rev REV             print the given revision
       --decode              apply any matching decode filter
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -T --template TEMPLATE   display with template
   
   (use 'hg cat -h' to show more help)
-  [255]
+  [10]
 
 Missing parameter for early option:
 
   $ hg log -R 2>&1 | grep 'hg log'
   hg log: option -R requires argument
   hg log [OPTION]... [FILE]
   (use 'hg log -h' to show more help)
 
 "--" may be an option value:
 
   $ hg -R -- log
   abort: repository -- not found
   [255]
   $ hg log -R --
   abort: repository -- not found
   [255]
   $ hg log -T --
   -- (no-eol)
   $ hg log -T -- -k nomatch
 
 Parsing of early options should stop at "--":
 
   $ hg cat -- --config=hooks.pre-cat=false
   --config=hooks.pre-cat=false: no such file in rev cb9a9f314b8b
   [1]
   $ hg cat -- --debugger
   --debugger: no such file in rev cb9a9f314b8b
   [1]
 
 Unparsable form of early options:
 
   $ hg cat --debugg
   abort: option --debugger may not be abbreviated
   [10]
 
 Parsing failure of early options should be detected before executing the
 command:
 
   $ hg log -b '--config=hooks.pre-log=false' default
   abort: option --config may not be abbreviated
   [10]
   $ hg log -b -R. default
   abort: option -R has to be separated from other options (e.g. not -qR) and --repository may only be abbreviated as --repo
   [10]
   $ hg log --cwd .. -b --cwd=. default
   abort: option --cwd may not be abbreviated
   [10]
 
 However, we can't prevent it from loading extensions and configs:
 
   $ cat <<EOF > bad.py
   > raise Exception('bad')
   > EOF
   $ hg log -b '--config=extensions.bad=bad.py' default
   *** failed to import extension bad from bad.py: bad
   abort: option --config may not be abbreviated
   [10]
 
   $ mkdir -p badrepo/.hg
   $ echo 'invalid-syntax' > badrepo/.hg/hgrc
   $ hg log -b -Rbadrepo default
   config error at badrepo/.hg/hgrc:1: invalid-syntax
   [30]
 
   $ hg log -b --cwd=inexistent default
   abort: $ENOENT$: 'inexistent'
   [255]
 
   $ hg log -b '--config=ui.traceback=yes' 2>&1 | grep '^Traceback'
   Traceback (most recent call last):
   $ hg log -b '--config=profiling.enabled=yes' 2>&1 | grep -i sample
   Sample count: .*|No samples recorded\. (re)
 
 Early options can't be specified in [aliases] and [defaults] because they are
 applied before the command name is resolved:
 
   $ hg log -b '--config=alias.log=log --config=hooks.pre-log=false'
   hg log: option -b not recognized
   error in definition for alias 'log': --config may only be given on the command
   line
-  [255]
+  [10]
 
   $ hg log -b '--config=defaults.log=--config=hooks.pre-log=false'
   abort: option --config may not be abbreviated
   [10]
 
 Shell aliases bypass any command parsing rules but for the early one:
 
   $ hg log -b '--config=alias.log=!echo howdy'
   howdy
 
 Early options must come first if HGPLAIN=+strictflags is specified:
 (BUG: chg cherry-picks early options to pass them as a server command)
 
 #if no-chg
   $ HGPLAIN=+strictflags hg log -b --config='hooks.pre-log=false' default
   abort: unknown revision '--config=hooks.pre-log=false'
   [255]
   $ HGPLAIN=+strictflags hg log -b -R. default
   abort: unknown revision '-R.'
   [255]
   $ HGPLAIN=+strictflags hg log -b --cwd=. default
   abort: unknown revision '--cwd=.'
   [255]
 #endif
   $ HGPLAIN=+strictflags hg log -b --debugger default
   abort: unknown revision '--debugger'
   [255]
   $ HGPLAIN=+strictflags hg log -b --config='alias.log=!echo pwned' default
   abort: unknown revision '--config=alias.log=!echo pwned'
   [255]
 
   $ HGPLAIN=+strictflags hg log --config='hooks.pre-log=false' -b default
   abort: option --config may not be abbreviated
   [10]
   $ HGPLAIN=+strictflags hg log -q --cwd=.. -b default
   abort: option --cwd may not be abbreviated
   [10]
   $ HGPLAIN=+strictflags hg log -q -R . -b default
   abort: option -R has to be separated from other options (e.g. not -qR) and --repository may only be abbreviated as --repo
   [10]
 
   $ HGPLAIN=+strictflags hg --config='hooks.pre-log=false' log -b default
   abort: pre-log hook exited with status 1
   [255]
   $ HGPLAIN=+strictflags hg --cwd .. -q -Ra log -b default
   0:cb9a9f314b8b
   $ HGPLAIN=+strictflags hg --cwd .. -q --repository a log -b default
   0:cb9a9f314b8b
   $ HGPLAIN=+strictflags hg --cwd .. -q --repo a log -b default
   0:cb9a9f314b8b
 
 For compatibility reasons, HGPLAIN=+strictflags is not enabled by plain HGPLAIN:
 
   $ HGPLAIN= hg log --config='hooks.pre-log=false' -b default
   abort: pre-log hook exited with status 1
   [255]
   $ HGPLAINEXCEPT= hg log --cwd .. -q -Ra -b default
   0:cb9a9f314b8b
 
 [defaults]
 
   $ hg cat a
   a
   $ cat >> $HGRCPATH <<EOF
   > [defaults]
   > cat = -r null
   > EOF
   $ hg cat a
   a: no such file in rev 000000000000
   [1]
 
   $ cd "$TESTTMP"
 
 OSError "No such file or directory" / "The system cannot find the path
 specified" should include filename even when it is empty
 
   $ hg -R a archive ''
   abort: $ENOENT$: '' (no-windows !)
   abort: $ENOTDIR$: '' (windows !)
   [255]
 
 #if no-outer-repo
 
 No repo:
 
   $ hg cat
   abort: no repository found in '$TESTTMP' (.hg not found)
   [10]
 
 #endif
 
 #if rmcwd
 
 Current directory removed:
 
   $ mkdir $TESTTMP/repo1
   $ cd $TESTTMP/repo1
   $ rm -rf $TESTTMP/repo1
 
 The output could be one of the following and something else:
  chg: abort: failed to getcwd (errno = *) (glob)
  abort: error getting current working directory: * (glob)
  sh: 0: getcwd() failed: $ENOENT$
 Since the exact behavior depends on the shell, only check it returns non-zero.
   $ HGDEMANDIMPORT=disable hg version -q 2>/dev/null || false
   [1]
 
 #endif

tests/test-extension.t

@@ -1,1908 +1,1908 b''
 Test basic extension support
   $ cat > unflush.py <<EOF
   > import sys
   > from mercurial import pycompat
   > if pycompat.ispy3:
   >     # no changes required
   >     sys.exit(0)
   > with open(sys.argv[1], 'rb') as f:
   >     data = f.read()
   > with open(sys.argv[1], 'wb') as f:
   >     f.write(data.replace(b', flush=True', b''))
   > EOF
 
   $ cat > foobar.py <<EOF
   > import os
   > from mercurial import commands, exthelper, registrar
   > 
   > eh = exthelper.exthelper()
   > eh.configitem(b'tests', b'foo', default=b"Foo")
   > 
   > uisetup = eh.finaluisetup
   > uipopulate = eh.finaluipopulate
   > reposetup = eh.finalreposetup
   > cmdtable = eh.cmdtable
   > configtable = eh.configtable
   > 
   > @eh.uisetup
   > def _uisetup(ui):
   >     ui.debug(b"uisetup called [debug]\\n")
   >     ui.write(b"uisetup called\\n")
   >     ui.status(b"uisetup called [status]\\n")
   >     ui.flush()
   > @eh.uipopulate
   > def _uipopulate(ui):
   >     ui._populatecnt = getattr(ui, "_populatecnt", 0) + 1
   >     ui.write(b"uipopulate called (%d times)\n" % ui._populatecnt)
   > @eh.reposetup
   > def _reposetup(ui, repo):
   >     ui.write(b"reposetup called for %s\\n" % os.path.basename(repo.root))
   >     ui.write(b"ui %s= repo.ui\\n" % (ui == repo.ui and b"=" or b"!"))
   >     ui.flush()
   > @eh.command(b'foo', [], b'hg foo')
   > def foo(ui, *args, **kwargs):
   >     foo = ui.config(b'tests', b'foo')
   >     ui.write(foo)
   >     ui.write(b"\\n")
   > @eh.command(b'bar', [], b'hg bar', norepo=True)
   > def bar(ui, *args, **kwargs):
   >     ui.write(b"Bar\\n")
   > EOF
   $ abspath=`pwd`/foobar.py
 
   $ mkdir barfoo
   $ cp foobar.py barfoo/__init__.py
   $ barfoopath=`pwd`/barfoo
 
   $ hg init a
   $ cd a
   $ echo foo > file
   $ hg add file
   $ hg commit -m 'add file'
 
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "foobar = $abspath" >> $HGRCPATH
   $ hg foo
   uisetup called
   uisetup called [status]
   uipopulate called (1 times)
   uipopulate called (1 times)
   uipopulate called (1 times)
   reposetup called for a
   ui == repo.ui
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   reposetup called for a (chg !)
   ui == repo.ui (chg !)
   Foo
   $ hg foo --quiet
   uisetup called (no-chg !)
   uipopulate called (1 times)
   uipopulate called (1 times)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times)
   reposetup called for a
   ui == repo.ui
   Foo
   $ hg foo --debug
   uisetup called [debug] (no-chg !)
   uisetup called (no-chg !)
   uisetup called [status] (no-chg !)
   uipopulate called (1 times)
   uipopulate called (1 times)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times)
   reposetup called for a
   ui == repo.ui
   Foo
 
   $ cd ..
   $ hg clone a b
   uisetup called (no-chg !)
   uisetup called [status] (no-chg !)
   uipopulate called (1 times)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times)
   reposetup called for a
   ui == repo.ui
   uipopulate called (1 times)
   reposetup called for b
   ui == repo.ui
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg bar
   uisetup called (no-chg !)
   uisetup called [status] (no-chg !)
   uipopulate called (1 times)
   uipopulate called (1 times) (chg !)
   Bar
   $ echo 'foobar = !' >> $HGRCPATH
 
 module/__init__.py-style
 
   $ echo "barfoo = $barfoopath" >> $HGRCPATH
   $ cd a
   $ hg foo
   uisetup called
   uisetup called [status]
   uipopulate called (1 times)
   uipopulate called (1 times)
   uipopulate called (1 times)
   reposetup called for a
   ui == repo.ui
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   uipopulate called (1 times) (chg !)
   reposetup called for a (chg !)
   ui == repo.ui (chg !)
   Foo
   $ echo 'barfoo = !' >> $HGRCPATH
 
 Check that extensions are loaded in phases:
 
   $ cat > foo.py <<EOF
   > from __future__ import print_function
   > import os
   > from mercurial import exthelper
   > from mercurial.utils import procutil
   > 
   > def write(msg):
   >     procutil.stdout.write(msg)
   >     procutil.stdout.flush()
   > 
   > name = os.path.basename(__file__).rsplit('.', 1)[0]
   > bytesname = name.encode('utf-8')
   > write(b"1) %s imported\n" % bytesname)
   > eh = exthelper.exthelper()
   > @eh.uisetup
   > def _uisetup(ui):
   >     write(b"2) %s uisetup\n" % bytesname)
   > @eh.extsetup
   > def _extsetup(ui):
   >     write(b"3) %s extsetup\n" % bytesname)
   > @eh.uipopulate
   > def _uipopulate(ui):
   >     write(b"4) %s uipopulate\n" % bytesname)
   > @eh.reposetup
   > def _reposetup(ui, repo):
   >     write(b"5) %s reposetup\n" % bytesname)
   > 
   > extsetup = eh.finalextsetup
   > reposetup = eh.finalreposetup
   > uipopulate = eh.finaluipopulate
   > uisetup = eh.finaluisetup
   > revsetpredicate = eh.revsetpredicate
   > 
   > # custom predicate to check registration of functions at loading
   > from mercurial import (
   >     smartset,
   > )
   > @eh.revsetpredicate(bytesname, safe=True) # safe=True for query via hgweb
   > def custompredicate(repo, subset, x):
   >     return smartset.baseset([r for r in subset if r in {0}])
   > EOF
   $ "$PYTHON" $TESTTMP/unflush.py foo.py
 
   $ cp foo.py bar.py
   $ echo 'foo = foo.py' >> $HGRCPATH
   $ echo 'bar = bar.py' >> $HGRCPATH
 
 Check normal command's load order of extensions and registration of functions
 
  On chg server, extension should be first set up by the server. Then
  object-level setup should follow in the worker process.
 
   $ hg log -r "foo() and bar()" -q
   1) foo imported
   1) bar imported
   2) foo uisetup
   2) bar uisetup
   3) foo extsetup
   3) bar extsetup
   4) foo uipopulate
   4) bar uipopulate
   4) foo uipopulate
   4) bar uipopulate
   4) foo uipopulate
   4) bar uipopulate
   5) foo reposetup
   5) bar reposetup
   4) foo uipopulate (chg !)
   4) bar uipopulate (chg !)
   4) foo uipopulate (chg !)
   4) bar uipopulate (chg !)
   4) foo uipopulate (chg !)
   4) bar uipopulate (chg !)
   4) foo uipopulate (chg !)
   4) bar uipopulate (chg !)
   4) foo uipopulate (chg !)
   4) bar uipopulate (chg !)
   5) foo reposetup (chg !)
   5) bar reposetup (chg !)
   0:c24b9ac61126
 
 Check hgweb's load order of extensions and registration of functions
 
   $ cat > hgweb.cgi <<EOF
   > #!$PYTHON
   > from mercurial import demandimport; demandimport.enable()
   > from mercurial.hgweb import hgweb
   > from mercurial.hgweb import wsgicgi
   > application = hgweb(b'.', b'test repo')
   > wsgicgi.launch(application)
   > EOF
   $ . "$TESTDIR/cgienv"
 
   $ PATH_INFO='/' SCRIPT_NAME='' "$PYTHON" hgweb.cgi \
   >    | grep '^[0-9]) ' # ignores HTML output
   1) foo imported
   1) bar imported
   2) foo uisetup
   2) bar uisetup
   3) foo extsetup
   3) bar extsetup
   4) foo uipopulate
   4) bar uipopulate
   4) foo uipopulate
   4) bar uipopulate
   5) foo reposetup
   5) bar reposetup
 
 (check that revset predicate foo() and bar() are available)
 
 #if msys
   $ PATH_INFO='//shortlog'
 #else
   $ PATH_INFO='/shortlog'
 #endif
   $ export PATH_INFO
   $ SCRIPT_NAME='' QUERY_STRING='rev=foo() and bar()' "$PYTHON" hgweb.cgi \
   >     | grep '<a href="/rev/[0-9a-z]*">'
      <a href="/rev/c24b9ac61126">add file</a>
 
   $ echo 'foo = !' >> $HGRCPATH
   $ echo 'bar = !' >> $HGRCPATH
 
 Check "from __future__ import absolute_import" support for external libraries
 
 (import-checker.py reports issues for some of heredoc python code
 fragments below, because import-checker.py does not know test specific
 package hierarchy. NO_CHECK_* should be used as a limit mark of
 heredoc, in order to make import-checker.py ignore them. For
 simplicity, all python code fragments below are generated with such
 limit mark, regardless of importing module or not.)
 
 #if windows
   $ PATHSEP=";"
 #else
   $ PATHSEP=":"
 #endif
   $ export PATHSEP
 
   $ mkdir $TESTTMP/libroot
   $ echo "s = 'libroot/ambig.py'" > $TESTTMP/libroot/ambig.py
   $ mkdir $TESTTMP/libroot/mod
   $ touch $TESTTMP/libroot/mod/__init__.py
   $ echo "s = 'libroot/mod/ambig.py'" > $TESTTMP/libroot/mod/ambig.py
 
   $ cat > $TESTTMP/libroot/mod/ambigabs.py <<NO_CHECK_EOF
   > from __future__ import absolute_import, print_function
   > import ambig # should load "libroot/ambig.py"
   > s = ambig.s
   > NO_CHECK_EOF
   $ cat > loadabs.py <<NO_CHECK_EOF
   > import mod.ambigabs as ambigabs
   > def extsetup(ui):
   >     print('ambigabs.s=%s' % ambigabs.s, flush=True)
   > NO_CHECK_EOF
   $ "$PYTHON" $TESTTMP/unflush.py loadabs.py
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}/libroot; hg --config extensions.loadabs=loadabs.py root)
   ambigabs.s=libroot/ambig.py
   $TESTTMP/a
 
 #if no-py3
   $ cat > $TESTTMP/libroot/mod/ambigrel.py <<NO_CHECK_EOF
   > from __future__ import print_function
   > import ambig # should load "libroot/mod/ambig.py"
   > s = ambig.s
   > NO_CHECK_EOF
   $ cat > loadrel.py <<NO_CHECK_EOF
   > import mod.ambigrel as ambigrel
   > def extsetup(ui):
   >     print('ambigrel.s=%s' % ambigrel.s, flush=True)
   > NO_CHECK_EOF
   $ "$PYTHON" $TESTTMP/unflush.py loadrel.py
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}/libroot; hg --config extensions.loadrel=loadrel.py root)
   ambigrel.s=libroot/mod/ambig.py
   $TESTTMP/a
 #endif
 
 Check absolute/relative import of extension specific modules
 
   $ mkdir $TESTTMP/extroot
   $ cat > $TESTTMP/extroot/bar.py <<NO_CHECK_EOF
   > s = b'this is extroot.bar'
   > NO_CHECK_EOF
   $ mkdir $TESTTMP/extroot/sub1
   $ cat > $TESTTMP/extroot/sub1/__init__.py <<NO_CHECK_EOF
   > s = b'this is extroot.sub1.__init__'
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extroot/sub1/baz.py <<NO_CHECK_EOF
   > s = b'this is extroot.sub1.baz'
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extroot/__init__.py <<NO_CHECK_EOF
   > from __future__ import absolute_import
   > s = b'this is extroot.__init__'
   > from . import foo
   > def extsetup(ui):
   >     ui.write(b'(extroot) ', foo.func(), b'\n')
   >     ui.flush()
   > NO_CHECK_EOF
 
   $ cat > $TESTTMP/extroot/foo.py <<NO_CHECK_EOF
   > # test absolute import
   > buf = []
   > def func():
   >     # "not locals" case
   >     import extroot.bar
   >     buf.append(b'import extroot.bar in func(): %s' % extroot.bar.s)
   >     return b'\n(extroot) '.join(buf)
   > # b"fromlist == ('*',)" case
   > from extroot.bar import *
   > buf.append(b'from extroot.bar import *: %s' % s)
   > # "not fromlist" and "if '.' in name" case
   > import extroot.sub1.baz
   > buf.append(b'import extroot.sub1.baz: %s' % extroot.sub1.baz.s)
   > # "not fromlist" and NOT "if '.' in name" case
   > import extroot
   > buf.append(b'import extroot: %s' % extroot.s)
   > # NOT "not fromlist" and NOT "level != -1" case
   > from extroot.bar import s
   > buf.append(b'from extroot.bar import s: %s' % s)
   > NO_CHECK_EOF
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.extroot=$TESTTMP/extroot root)
   (extroot) from extroot.bar import *: this is extroot.bar
   (extroot) import extroot.sub1.baz: this is extroot.sub1.baz
   (extroot) import extroot: this is extroot.__init__
   (extroot) from extroot.bar import s: this is extroot.bar
   (extroot) import extroot.bar in func(): this is extroot.bar
   $TESTTMP/a
 
 #if no-py3
   $ rm "$TESTTMP"/extroot/foo.*
   $ rm -Rf "$TESTTMP/extroot/__pycache__"
   $ cat > $TESTTMP/extroot/foo.py <<NO_CHECK_EOF
   > # test relative import
   > buf = []
   > def func():
   >     # "not locals" case
   >     import bar
   >     buf.append('import bar in func(): %s' % bar.s)
   >     return '\n(extroot) '.join(buf)
   > # "fromlist == ('*',)" case
   > from bar import *
   > buf.append('from bar import *: %s' % s)
   > # "not fromlist" and "if '.' in name" case
   > import sub1.baz
   > buf.append('import sub1.baz: %s' % sub1.baz.s)
   > # "not fromlist" and NOT "if '.' in name" case
   > import sub1
   > buf.append('import sub1: %s' % sub1.s)
   > # NOT "not fromlist" and NOT "level != -1" case
   > from bar import s
   > buf.append('from bar import s: %s' % s)
   > NO_CHECK_EOF
   $ hg --config extensions.extroot=$TESTTMP/extroot root
   (extroot) from bar import *: this is extroot.bar
   (extroot) import sub1.baz: this is extroot.sub1.baz
   (extroot) import sub1: this is extroot.sub1.__init__
   (extroot) from bar import s: this is extroot.bar
   (extroot) import bar in func(): this is extroot.bar
   $TESTTMP/a
 #endif
 
 #if demandimport
 
 Examine whether module loading is delayed until actual referring, even
 though module is imported with "absolute_import" feature.
 
 Files below in each packages are used for described purpose:
 
 - "called": examine whether "from MODULE import ATTR" works correctly
 - "unused": examine whether loading is delayed correctly
 - "used":   examine whether "from PACKAGE import MODULE" works correctly
 
 Package hierarchy is needed to examine whether demand importing works
 as expected for "from SUB.PACK.AGE import MODULE".
 
 Setup "external library" to be imported with "absolute_import"
 feature.
 
   $ mkdir -p $TESTTMP/extlibroot/lsub1/lsub2
   $ touch $TESTTMP/extlibroot/__init__.py
   $ touch $TESTTMP/extlibroot/lsub1/__init__.py
   $ touch $TESTTMP/extlibroot/lsub1/lsub2/__init__.py
 
   $ cat > $TESTTMP/extlibroot/lsub1/lsub2/called.py <<NO_CHECK_EOF
   > def func():
   >     return b"this is extlibroot.lsub1.lsub2.called.func()"
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extlibroot/lsub1/lsub2/unused.py <<NO_CHECK_EOF
   > raise Exception("extlibroot.lsub1.lsub2.unused is loaded unintentionally")
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extlibroot/lsub1/lsub2/used.py <<NO_CHECK_EOF
   > detail = b"this is extlibroot.lsub1.lsub2.used"
   > NO_CHECK_EOF
 
 Setup sub-package of "external library", which causes instantiation of
 demandmod in "recurse down the module chain" code path. Relative
 importing with "absolute_import" feature isn't tested, because "level
 >=1 " doesn't cause instantiation of demandmod.
 
   $ mkdir -p $TESTTMP/extlibroot/recursedown/abs
   $ cat > $TESTTMP/extlibroot/recursedown/abs/used.py <<NO_CHECK_EOF
   > detail = b"this is extlibroot.recursedown.abs.used"
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extlibroot/recursedown/abs/__init__.py <<NO_CHECK_EOF
   > from __future__ import absolute_import
   > from extlibroot.recursedown.abs.used import detail
   > NO_CHECK_EOF
 
   $ mkdir -p $TESTTMP/extlibroot/recursedown/legacy
   $ cat > $TESTTMP/extlibroot/recursedown/legacy/used.py <<NO_CHECK_EOF
   > detail = b"this is extlibroot.recursedown.legacy.used"
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extlibroot/recursedown/legacy/__init__.py <<NO_CHECK_EOF
   > # legacy style (level == -1) import
   > from extlibroot.recursedown.legacy.used import detail
   > NO_CHECK_EOF
 
   $ cat > $TESTTMP/extlibroot/recursedown/__init__.py <<NO_CHECK_EOF
   > from __future__ import absolute_import
   > from extlibroot.recursedown.abs import detail as absdetail
   > from .legacy import detail as legacydetail
   > NO_CHECK_EOF
 
 Setup package that re-exports an attribute of its submodule as the same
 name. This leaves 'shadowing.used' pointing to 'used.detail', but still
 the submodule 'used' should be somehow accessible. (issue5617)
 
   $ mkdir -p $TESTTMP/extlibroot/shadowing
   $ cat > $TESTTMP/extlibroot/shadowing/used.py <<NO_CHECK_EOF
   > detail = b"this is extlibroot.shadowing.used"
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extlibroot/shadowing/proxied.py <<NO_CHECK_EOF
   > from __future__ import absolute_import
   > from extlibroot.shadowing.used import detail
   > NO_CHECK_EOF
   $ cat > $TESTTMP/extlibroot/shadowing/__init__.py <<NO_CHECK_EOF
   > from __future__ import absolute_import
   > from .used import detail as used
   > NO_CHECK_EOF
 
 Setup extension local modules to be imported with "absolute_import"
 feature.
 
   $ mkdir -p $TESTTMP/absextroot/xsub1/xsub2
   $ touch $TESTTMP/absextroot/xsub1/__init__.py
   $ touch $TESTTMP/absextroot/xsub1/xsub2/__init__.py
 
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/called.py <<NO_CHECK_EOF
   > def func():
   >     return b"this is absextroot.xsub1.xsub2.called.func()"
   > NO_CHECK_EOF
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/unused.py <<NO_CHECK_EOF
   > raise Exception("absextroot.xsub1.xsub2.unused is loaded unintentionally")
   > NO_CHECK_EOF
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/used.py <<NO_CHECK_EOF
   > detail = b"this is absextroot.xsub1.xsub2.used"
   > NO_CHECK_EOF
 
 Setup extension local modules to examine whether demand importing
 works as expected in "level > 1" case.
 
   $ cat > $TESTTMP/absextroot/relimportee.py <<NO_CHECK_EOF
   > detail = b"this is absextroot.relimportee"
   > NO_CHECK_EOF
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/relimporter.py <<NO_CHECK_EOF
   > from __future__ import absolute_import
   > from mercurial import pycompat
   > from ... import relimportee
   > detail = b"this relimporter imports %r" % (
   >     pycompat.bytestr(relimportee.detail))
   > NO_CHECK_EOF
 
 Setup modules, which actually import extension local modules at
 runtime.
 
   $ cat > $TESTTMP/absextroot/absolute.py << NO_CHECK_EOF
   > from __future__ import absolute_import
   > 
   > # import extension local modules absolutely (level = 0)
   > from absextroot.xsub1.xsub2 import used, unused
   > from absextroot.xsub1.xsub2.called import func
   > 
   > def getresult():
   >     result = []
   >     result.append(used.detail)
   >     result.append(func())
   >     return result
   > NO_CHECK_EOF
 
   $ cat > $TESTTMP/absextroot/relative.py << NO_CHECK_EOF
   > from __future__ import absolute_import
   > 
   > # import extension local modules relatively (level == 1)
   > from .xsub1.xsub2 import used, unused
   > from .xsub1.xsub2.called import func
   > 
   > # import a module, which implies "importing with level > 1"
   > from .xsub1.xsub2 import relimporter
   > 
   > def getresult():
   >     result = []
   >     result.append(used.detail)
   >     result.append(func())
   >     result.append(relimporter.detail)
   >     return result
   > NO_CHECK_EOF
 
 Setup main procedure of extension.
 
   $ cat > $TESTTMP/absextroot/__init__.py <<NO_CHECK_EOF
   > from __future__ import absolute_import
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > 
   > # "absolute" and "relative" shouldn't be imported before actual
   > # command execution, because (1) they import same modules, and (2)
   > # preceding import (= instantiate "demandmod" object instead of
   > # real "module" object) might hide problem of succeeding import.
   > 
   > @command(b'showabsolute', [], norepo=True)
   > def showabsolute(ui, *args, **opts):
   >     from absextroot import absolute
   >     ui.write(b'ABS: %s\n' % b'\nABS: '.join(absolute.getresult()))
   > 
   > @command(b'showrelative', [], norepo=True)
   > def showrelative(ui, *args, **opts):
   >     from . import relative
   >     ui.write(b'REL: %s\n' % b'\nREL: '.join(relative.getresult()))
   > 
   > # import modules from external library
   > from extlibroot.lsub1.lsub2 import used as lused, unused as lunused
   > from extlibroot.lsub1.lsub2.called import func as lfunc
   > from extlibroot.recursedown import absdetail, legacydetail
   > from extlibroot.shadowing import proxied
   > 
   > def uisetup(ui):
   >     result = []
   >     result.append(lused.detail)
   >     result.append(lfunc())
   >     result.append(absdetail)
   >     result.append(legacydetail)
   >     result.append(proxied.detail)
   >     ui.write(b'LIB: %s\n' % b'\nLIB: '.join(result))
   > NO_CHECK_EOF
 
 Examine module importing.
 
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.absextroot=$TESTTMP/absextroot showabsolute)
   LIB: this is extlibroot.lsub1.lsub2.used
   LIB: this is extlibroot.lsub1.lsub2.called.func()
   LIB: this is extlibroot.recursedown.abs.used
   LIB: this is extlibroot.recursedown.legacy.used
   LIB: this is extlibroot.shadowing.used
   ABS: this is absextroot.xsub1.xsub2.used
   ABS: this is absextroot.xsub1.xsub2.called.func()
 
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.absextroot=$TESTTMP/absextroot showrelative)
   LIB: this is extlibroot.lsub1.lsub2.used
   LIB: this is extlibroot.lsub1.lsub2.called.func()
   LIB: this is extlibroot.recursedown.abs.used
   LIB: this is extlibroot.recursedown.legacy.used
   LIB: this is extlibroot.shadowing.used
   REL: this is absextroot.xsub1.xsub2.used
   REL: this is absextroot.xsub1.xsub2.called.func()
   REL: this relimporter imports 'this is absextroot.relimportee'
 
 Examine whether sub-module is imported relatively as expected.
 
 See also issue5208 for detail about example case on Python 3.x.
 
   $ f -q $TESTTMP/extlibroot/lsub1/lsub2/notexist.py
   $TESTTMP/extlibroot/lsub1/lsub2/notexist.py: file not found
 
   $ cat > $TESTTMP/notexist.py <<NO_CHECK_EOF
   > text = 'notexist.py at root is loaded unintentionally\n'
   > NO_CHECK_EOF
 
   $ cat > $TESTTMP/checkrelativity.py <<NO_CHECK_EOF
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > 
   > # demand import avoids failure of importing notexist here, but only on
   > # Python 2.
   > import extlibroot.lsub1.lsub2.notexist
   > 
   > @command(b'checkrelativity', [], norepo=True)
   > def checkrelativity(ui, *args, **opts):
   >     try:
   >         ui.write(extlibroot.lsub1.lsub2.notexist.text)
   >         return 1 # unintentional success
   >     except ImportError:
   >         pass # intentional failure
   > NO_CHECK_EOF
 
 Python 3's lazy importer verifies modules exist before returning the lazy
 module stub. Our custom lazy importer for Python 2 always returns a stub.
 
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.checkrelativity=$TESTTMP/checkrelativity.py checkrelativity) || true
   *** failed to import extension checkrelativity from $TESTTMP/checkrelativity.py: No module named 'extlibroot.lsub1.lsub2.notexist' (py3 !)
   hg: unknown command 'checkrelativity' (py3 !)
   (use 'hg help' for a list of commands) (py3 !)
 
 #endif
 
 (Here, module importing tests are finished. Therefore, use other than
 NO_CHECK_* limit mark for heredoc python files, in order to apply
 import-checker.py or so on their contents)
 
 Make sure a broken uisetup doesn't globally break hg:
   $ cat > $TESTTMP/baduisetup.py <<EOF
   > def uisetup(ui):
   >     1 / 0
   > EOF
 
 Even though the extension fails during uisetup, hg is still basically usable:
   $ hg --config extensions.baduisetup=$TESTTMP/baduisetup.py version
   Traceback (most recent call last):
     File "*/mercurial/extensions.py", line *, in _runuisetup (glob)
       uisetup(ui)
     File "$TESTTMP/baduisetup.py", line 2, in uisetup
       1 / 0
   ZeroDivisionError: * by zero (glob)
   *** failed to set up extension baduisetup: * by zero (glob)
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
   $ cd ..
 
 hide outer repo
   $ hg init
 
   $ cat > empty.py <<EOF
   > '''empty cmdtable
   > '''
   > cmdtable = {}
   > EOF
   $ emptypath=`pwd`/empty.py
   $ echo "empty = $emptypath" >> $HGRCPATH
   $ hg help empty
   empty extension - empty cmdtable
   
   no commands defined
 
 
   $ echo 'empty = !' >> $HGRCPATH
 
   $ cat > debugextension.py <<EOF
   > '''only debugcommands
   > '''
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'debugfoobar', [], b'hg debugfoobar')
   > def debugfoobar(ui, repo, *args, **opts):
   >     "yet another debug command"
   > @command(b'foo', [], b'hg foo')
   > def foo(ui, repo, *args, **opts):
   >     """yet another foo command
   >     This command has been DEPRECATED since forever.
   >     """
   > EOF
   $ debugpath=`pwd`/debugextension.py
   $ echo "debugextension = $debugpath" >> $HGRCPATH
 
   $ hg help debugextension
   hg debugextensions
   
   show information about active extensions
   
   options:
   
    -T --template TEMPLATE display with template
   
   (some details hidden, use --verbose to show complete help)
 
 
   $ hg --verbose help debugextension
   hg debugextensions
   
   show information about active extensions
   
   options:
   
    -T --template TEMPLATE display with template
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 
 
 
 
 
   $ hg --debug help debugextension
   hg debugextensions
   
   show information about active extensions
   
   options:
   
    -T --template TEMPLATE display with template
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 
 
 
 
   $ echo 'debugextension = !' >> $HGRCPATH
 
 Asking for help about a deprecated extension should do something useful:
 
   $ hg help glog
   'glog' is provided by the following extension:
   
       graphlog      command to view revision graphs from a shell (DEPRECATED)
   
   (use 'hg help extensions' for information on enabling extensions)
 
 Extension module help vs command help:
 
   $ echo 'extdiff =' >> $HGRCPATH
   $ hg help extdiff
   hg extdiff [OPT]... [FILE]...
   
   use external program to diff repository (or selected files)
   
       Show differences between revisions for the specified files, using an
       external program. The default program used is diff, with default options
       "-Npru".
   
       To select a different program, use the -p/--program option. The program
       will be passed the names of two directories to compare, unless the --per-
       file option is specified (see below). To pass additional options to the
       program, use -o/--option. These will be passed before the names of the
       directories or files to compare.
   
       The --from, --to, and --change options work the same way they do for 'hg
       diff'.
   
       The --per-file option runs the external program repeatedly on each file to
       diff, instead of once on two directories. By default, this happens one by
       one, where the next file diff is open in the external program only once
       the previous external program (for the previous file diff) has exited. If
       the external program has a graphical interface, it can open all the file
       diffs at once instead of one by one. See 'hg help -e extdiff' for
       information about how to tell Mercurial that a given program has a
       graphical interface.
   
       The --confirm option will prompt the user before each invocation of the
       external program. It is ignored if --per-file isn't specified.
   
   (use 'hg help -e extdiff' to show help for the extdiff extension)
   
   options ([+] can be repeated):
   
    -p --program CMD         comparison program to run
    -o --option OPT [+]      pass option to comparison program
       --from REV1           revision to diff from
       --to REV2             revision to diff to
    -c --change REV          change made by revision
       --per-file            compare each file instead of revision snapshots
       --confirm             prompt user before each external program invocation
       --patch               compare patches for two revisions
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
   
   (some details hidden, use --verbose to show complete help)
 
 
 
 
 
 
 
 
 
 
   $ hg help --extension extdiff
   extdiff extension - command to allow external programs to compare revisions
   
   The extdiff Mercurial extension allows you to use external programs to compare
   revisions, or revision with working directory. The external diff programs are
   called with a configurable set of options and two non-option arguments: paths
   to directories containing snapshots of files to compare.
   
   If there is more than one file being compared and the "child" revision is the
   working directory, any modifications made in the external diff program will be
   copied back to the working directory from the temporary directory.
   
   The extdiff extension also allows you to configure new diff commands, so you
   do not need to type 'hg extdiff -p kdiff3' always.
   
     [extdiff]
     # add new command that runs GNU diff(1) in 'context diff' mode
     cdiff = gdiff -Nprc5
     ## or the old way:
     #cmd.cdiff = gdiff
     #opts.cdiff = -Nprc5
   
     # add new command called meld, runs meld (no need to name twice).  If
     # the meld executable is not available, the meld tool in [merge-tools]
     # will be used, if available
     meld =
   
     # add new command called vimdiff, runs gvimdiff with DirDiff plugin
     # (see http://www.vim.org/scripts/script.php?script_id=102) Non
     # English user, be sure to put "let g:DirDiffDynamicDiffText = 1" in
     # your .vimrc
     vimdiff = gvim -f "+next" \
               "+execute 'DirDiff' fnameescape(argv(0)) fnameescape(argv(1))"
   
   Tool arguments can include variables that are expanded at runtime:
   
     $parent1, $plabel1 - filename, descriptive label of first parent
     $child,   $clabel  - filename, descriptive label of child revision
     $parent2, $plabel2 - filename, descriptive label of second parent
     $root              - repository root
     $parent is an alias for $parent1.
   
   The extdiff extension will look in your [diff-tools] and [merge-tools]
   sections for diff tool arguments, when none are specified in [extdiff].
   
     [extdiff]
     kdiff3 =
   
     [diff-tools]
     kdiff3.diffargs=--L1 '$plabel1' --L2 '$clabel' $parent $child
   
   If a program has a graphical interface, it might be interesting to tell
   Mercurial about it. It will prevent the program from being mistakenly used in
   a terminal-only environment (such as an SSH terminal session), and will make
   'hg extdiff --per-file' open multiple file diffs at once instead of one by one
   (if you still want to open file diffs one by one, you can use the --confirm
   option).
   
   Declaring that a tool has a graphical interface can be done with the "gui"
   flag next to where "diffargs" are specified:
   
     [diff-tools]
     kdiff3.diffargs=--L1 '$plabel1' --L2 '$clabel' $parent $child
     kdiff3.gui = true
   
   You can use -I/-X and list of file or directory names like normal 'hg diff'
   command. The extdiff extension makes snapshots of only needed files, so
   running the external diff program will actually be pretty fast (at least
   faster than having to compare the entire tree).
   
   list of commands:
   
    extdiff       use external program to diff repository (or selected files)
   
   (use 'hg help -v -e extdiff' to show built-in aliases and global options)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   $ echo 'extdiff = !' >> $HGRCPATH
 
 Test help topic with same name as extension
 
   $ cat > multirevs.py <<EOF
   > from mercurial import commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > """multirevs extension
   > Big multi-line module docstring."""
   > @command(b'multirevs', [], b'ARG', norepo=True)
   > def multirevs(ui, repo, arg, *args, **opts):
   >     """multirevs command"""
   > EOF
   $ echo "multirevs = multirevs.py" >> $HGRCPATH
 
   $ hg help multirevs | tail
         used):
   
           hg update :@
   
       - Show diff between tags 1.3 and 1.5 (this works because the first and the
         last revisions of the revset are used):
   
           hg diff -r 1.3::1.5
   
   use 'hg help -c multirevs' to see help for the multirevs command
 
 
 
 
 
 
   $ hg help -c multirevs
   hg multirevs ARG
   
   multirevs command
   
   (some details hidden, use --verbose to show complete help)
 
 
 
   $ hg multirevs
   hg multirevs: invalid arguments
   hg multirevs ARG
   
   multirevs command
   
   (use 'hg multirevs -h' to show more help)
-  [255]
+  [10]
 
 
 
   $ echo "multirevs = !" >> $HGRCPATH
 
 Issue811: Problem loading extensions twice (by site and by user)
 
   $ cat <<EOF >> $HGRCPATH
   > mq =
   > strip =
   > hgext.mq =
   > hgext/mq =
   > EOF
 
 Show extensions:
 (note that mq force load strip, also checking it's not loaded twice)
 
 #if no-extraextensions
   $ hg debugextensions
   mq
   strip
 #endif
 
 For extensions, which name matches one of its commands, help
 message should ask '-v -e' to get list of built-in aliases
 along with extension help itself
 
   $ mkdir $TESTTMP/d
   $ cat > $TESTTMP/d/dodo.py <<EOF
   > """
   > This is an awesome 'dodo' extension. It does nothing and
   > writes 'Foo foo'
   > """
   > from mercurial import commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'dodo', [], b'hg dodo')
   > def dodo(ui, *args, **kwargs):
   >     """Does nothing"""
   >     ui.write(b"I do nothing. Yay\\n")
   > @command(b'foofoo', [], b'hg foofoo')
   > def foofoo(ui, *args, **kwargs):
   >     """Writes 'Foo foo'"""
   >     ui.write(b"Foo foo\\n")
   > EOF
   $ dodopath=$TESTTMP/d/dodo.py
 
   $ echo "dodo = $dodopath" >> $HGRCPATH
 
 Make sure that user is asked to enter '-v -e' to get list of built-in aliases
   $ hg help -e dodo
   dodo extension -
   
   This is an awesome 'dodo' extension. It does nothing and writes 'Foo foo'
   
   list of commands:
   
    dodo          Does nothing
    foofoo        Writes 'Foo foo'
   
   (use 'hg help -v -e dodo' to show built-in aliases and global options)
 
 Make sure that '-v -e' prints list of built-in aliases along with
 extension help itself
   $ hg help -v -e dodo
   dodo extension -
   
   This is an awesome 'dodo' extension. It does nothing and writes 'Foo foo'
   
   list of commands:
   
    dodo          Does nothing
    foofoo        Writes 'Foo foo'
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 Make sure that single '-v' option shows help and built-ins only for 'dodo' command
   $ hg help -v dodo
   hg dodo
   
   Does nothing
   
   (use 'hg help -e dodo' to show help for the dodo extension)
   
   options:
   
     --mq operate on patch repository
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 In case when extension name doesn't match any of its commands,
 help message should ask for '-v' to get list of built-in aliases
 along with extension help
   $ cat > $TESTTMP/d/dudu.py <<EOF
   > """
   > This is an awesome 'dudu' extension. It does something and
   > also writes 'Beep beep'
   > """
   > from mercurial import commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'something', [], b'hg something')
   > def something(ui, *args, **kwargs):
   >     """Does something"""
   >     ui.write(b"I do something. Yaaay\\n")
   > @command(b'beep', [], b'hg beep')
   > def beep(ui, *args, **kwargs):
   >     """Writes 'Beep beep'"""
   >     ui.write(b"Beep beep\\n")
   > EOF
   $ dudupath=$TESTTMP/d/dudu.py
 
   $ echo "dudu = $dudupath" >> $HGRCPATH
 
   $ hg help -e dudu
   dudu extension -
   
   This is an awesome 'dudu' extension. It does something and also writes 'Beep
   beep'
   
   list of commands:
   
    beep          Writes 'Beep beep'
    something     Does something
   
   (use 'hg help -v dudu' to show built-in aliases and global options)
 
 In case when extension name doesn't match any of its commands,
 help options '-v' and '-v -e' should be equivalent
   $ hg help -v dudu
   dudu extension -
   
   This is an awesome 'dudu' extension. It does something and also writes 'Beep
   beep'
   
   list of commands:
   
    beep          Writes 'Beep beep'
    something     Does something
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
   $ hg help -v -e dudu
   dudu extension -
   
   This is an awesome 'dudu' extension. It does something and also writes 'Beep
   beep'
   
   list of commands:
   
    beep          Writes 'Beep beep'
    something     Does something
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 Disabled extension commands:
 
   $ ORGHGRCPATH=$HGRCPATH
   $ HGRCPATH=
   $ export HGRCPATH
   $ hg help email
   'email' is provided by the following extension:
   
       patchbomb     command to send changesets as (a series of) patch emails
   
   (use 'hg help extensions' for information on enabling extensions)
 
 
   $ hg qdel
   hg: unknown command 'qdel'
   'qdelete' is provided by the following extension:
   
       mq            manage a stack of patches
   
   (use 'hg help extensions' for information on enabling extensions)
   [255]
 
 
   $ hg churn
   hg: unknown command 'churn'
   'churn' is provided by the following extension:
   
       churn         command to display statistics about repository history
   
   (use 'hg help extensions' for information on enabling extensions)
   [255]
 
 
 
 Disabled extensions:
 
   $ hg help churn
   churn extension - command to display statistics about repository history
   
   (use 'hg help extensions' for information on enabling extensions)
 
   $ hg help patchbomb
   patchbomb extension - command to send changesets as (a series of) patch emails
   
   The series is started off with a "[PATCH 0 of N]" introduction, which
   describes the series as a whole.
   
   Each patch email has a Subject line of "[PATCH M of N] ...", using the first
   line of the changeset description as the subject text. The message contains
   two or three body parts:
   
   - The changeset description.
   - [Optional] The result of running diffstat on the patch.
   - The patch itself, as generated by 'hg export'.
   
   Each message refers to the first in the series using the In-Reply-To and
   References headers, so they will show up as a sequence in threaded mail and
   news readers, and in mail archives.
   
   To configure other defaults, add a section like this to your configuration
   file:
   
     [email]
     from = My Name <my@email>
     to = recipient1, recipient2, ...
     cc = cc1, cc2, ...
     bcc = bcc1, bcc2, ...
     reply-to = address1, address2, ...
   
   Use "[patchbomb]" as configuration section name if you need to override global
   "[email]" address settings.
   
   Then you can use the 'hg email' command to mail a series of changesets as a
   patchbomb.
   
   You can also either configure the method option in the email section to be a
   sendmail compatible mailer or fill out the [smtp] section so that the
   patchbomb extension can automatically send patchbombs directly from the
   commandline. See the [email] and [smtp] sections in hgrc(5) for details.
   
   By default, 'hg email' will prompt for a "To" or "CC" header if you do not
   supply one via configuration or the command line.  You can override this to
   never prompt by configuring an empty value:
   
     [email]
     cc =
   
   You can control the default inclusion of an introduction message with the
   "patchbomb.intro" configuration option. The configuration is always
   overwritten by command line flags like --intro and --desc:
   
     [patchbomb]
     intro=auto   # include introduction message if more than 1 patch (default)
     intro=never  # never include an introduction message
     intro=always # always include an introduction message
   
   You can specify a template for flags to be added in subject prefixes. Flags
   specified by --flag option are exported as "{flags}" keyword:
   
     [patchbomb]
     flagtemplate = "{separate(' ',
                               ifeq(branch, 'default', '', branch|upper),
                               flags)}"
   
   You can set patchbomb to always ask for confirmation by setting
   "patchbomb.confirm" to true.
   
   (use 'hg help extensions' for information on enabling extensions)
 
 
 Broken disabled extension and command:
 
   $ mkdir hgext
   $ echo > hgext/__init__.py
   $ cat > hgext/broken.py <<NO_CHECK_EOF
   > "broken extension'
   > NO_CHECK_EOF
   $ cat > path.py <<EOF
   > import os
   > import sys
   > sys.path.insert(0, os.environ['HGEXTPATH'])
   > EOF
   $ HGEXTPATH=`pwd`
   $ export HGEXTPATH
 
   $ hg --config extensions.path=./path.py help broken
   broken extension - (no help text available)
   
   (use 'hg help extensions' for information on enabling extensions)
 
 
   $ cat > hgext/forest.py <<EOF
   > cmdtable = None
   > @command()
   > def f():
   >     pass
   > @command(123)
   > def g():
   >     pass
   > EOF
   $ hg --config extensions.path=./path.py help foo
   abort: no such help topic: foo
   (try 'hg help --keyword foo')
   [255]
 
   $ cat > throw.py <<EOF
   > from mercurial import commands, registrar, util
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > class Bogon(Exception): pass
   > # NB: version should be bytes; simulating extension not ported to py3
   > __version__ = '1.0.0'
   > @command(b'throw', [], b'hg throw', norepo=True)
   > def throw(ui, **opts):
   >     """throws an exception"""
   >     raise Bogon()
   > EOF
 
 Test extension without proper byteification of key attributes doesn't crash when
 accessed.
 
   $ hg version -v --config extensions.throw=throw.py | grep '^ '
     throw  external  1.0.0
 
 No declared supported version, extension complains:
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension "throw" 1.0.0
   ** which supports versions unknown of Mercurial.
   ** Please disable "throw" and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM * (glob)
   ** Extensions loaded: throw 1.0.0
 
 empty declaration of supported version, extension complains (but doesn't choke if
 the value is improperly a str instead of bytes):
   $ echo "testedwith = ''" >> throw.py
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension "throw" 1.0.0
   ** which supports versions unknown of Mercurial.
   ** Please disable "throw" and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw 1.0.0
 
 If the extension specifies a buglink, show that (but don't choke if the value is
 improperly a str instead of bytes):
   $ echo 'buglink = "http://example.com/bts"' >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension "throw" 1.0.0
   ** which supports versions unknown of Mercurial.
   ** Please disable "throw" and try your action again.
   ** If that fixes the bug please report it to http://example.com/bts
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw 1.0.0
 
 If the extensions declare outdated versions, accuse the older extension first:
   $ echo "from mercurial import util" >> older.py
   $ echo "util.version = lambda:b'2.2'" >> older.py
   $ echo "testedwith = b'1.9.3'" >> older.py
   $ echo "testedwith = b'2.1.1'" >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension "older" (version N/A)
   ** which supports versions 1.9 of Mercurial.
   ** Please disable "older" and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM (version 2.2)
   ** Extensions loaded: older, throw 1.0.0
 
 One extension only tested with older, one only with newer versions:
   $ echo "util.version = lambda:b'2.1'" >> older.py
   $ rm -f older.pyc older.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension "older" (version N/A)
   ** which supports versions 1.9 of Mercurial.
   ** Please disable "older" and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM (version 2.1)
   ** Extensions loaded: older, throw 1.0.0
 
 Older extension is tested with current version, the other only with newer:
   $ echo "util.version = lambda:b'1.9.3'" >> older.py
   $ rm -f older.pyc older.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension "throw" 1.0.0
   ** which supports versions 2.1 of Mercurial.
   ** Please disable "throw" and try your action again.
   ** If that fixes the bug please report it to http://example.com/bts
   ** Python * (glob)
   ** Mercurial Distributed SCM (version 1.9.3)
   ** Extensions loaded: older, throw 1.0.0
 
 Ability to point to a different point
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   --config ui.supportcontact='Your Local Goat Lenders' throw 2>&1 | egrep '^\*\*'
   ** unknown exception encountered, please report by visiting
   ** Your Local Goat Lenders
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: older, throw 1.0.0
 
 Declare the version as supporting this hg version, show regular bts link:
   $ hgver=`hg debuginstall -T '{hgver}'`
   $ echo 'testedwith = """'"$hgver"'"""' >> throw.py
   $ if [ -z "$hgver" ]; then
   >   echo "unable to fetch a mercurial version. Make sure __version__ is correct";
   > fi
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** unknown exception encountered, please report by visiting
   ** https://mercurial-scm.org/wiki/BugTracker
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw 1.0.0
 
 Patch version is ignored during compatibility check
   $ echo "testedwith = b'3.2'" >> throw.py
   $ echo "util.version = lambda:b'3.2.2'" >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** unknown exception encountered, please report by visiting
   ** https://mercurial-scm.org/wiki/BugTracker
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw 1.0.0
 
 Test version number support in 'hg version':
   $ echo '__version__ = (1, 2, 3)' >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg version -v
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   
   Enabled extensions:
   
 
   $ hg version -v --config extensions.throw=throw.py
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   
   Enabled extensions:
   
     throw  external  1.2.3
   $ echo 'getversion = lambda: b"1.twentythree"' >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg version -v --config extensions.throw=throw.py --config extensions.strip=
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   
   Enabled extensions:
   
     strip  internal  
     throw  external  1.twentythree
 
   $ hg version -q --config extensions.throw=throw.py
   Mercurial Distributed SCM (version *) (glob)
 
 Test template output:
 
   $ hg version --config extensions.strip= -T'{extensions}'
   strip
 
 Test JSON output of version:
 
   $ hg version -Tjson
   [
    {
     "extensions": [],
     "ver": "*" (glob)
    }
   ]
 
   $ hg version --config extensions.throw=throw.py -Tjson
   [
    {
     "extensions": [{"bundled": false, "name": "throw", "ver": "1.twentythree"}],
     "ver": "3.2.2"
    }
   ]
 
   $ hg version --config extensions.strip= -Tjson
   [
    {
     "extensions": [{"bundled": true, "name": "strip", "ver": null}],
     "ver": "*" (glob)
    }
   ]
 
 Test template output of version:
 
   $ hg version --config extensions.throw=throw.py --config extensions.strip= \
   > -T'{extensions % "{name}  {pad(ver, 16)}  ({if(bundled, "internal", "external")})\n"}'
   strip                    (internal)
   throw  1.twentythree     (external)
 
 Refuse to load extensions with minimum version requirements
 
   $ cat > minversion1.py << EOF
   > from mercurial import util
   > util.version = lambda: b'3.5.2'
   > minimumhgversion = b'3.6'
   > EOF
   $ hg --config extensions.minversion=minversion1.py version
   (third party extension minversion requires version 3.6 or newer of Mercurial (current: 3.5.2); disabling)
   Mercurial Distributed SCM (version 3.5.2)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
   $ cat > minversion2.py << EOF
   > from mercurial import util
   > util.version = lambda: b'3.6'
   > minimumhgversion = b'3.7'
   > EOF
   $ hg --config extensions.minversion=minversion2.py version 2>&1 | egrep '\(third'
   (third party extension minversion requires version 3.7 or newer of Mercurial (current: 3.6); disabling)
 
 Can load version that is only off by point release
 
   $ cat > minversion2.py << EOF
   > from mercurial import util
   > util.version = lambda: b'3.6.1'
   > minimumhgversion = b'3.6'
   > EOF
   $ hg --config extensions.minversion=minversion3.py version 2>&1 | egrep '\(third'
   [1]
 
 Can load minimum version identical to current
 
   $ cat > minversion3.py << EOF
   > from mercurial import util
   > util.version = lambda: b'3.5'
   > minimumhgversion = b'3.5'
   > EOF
   $ hg --config extensions.minversion=minversion3.py version 2>&1 | egrep '\(third'
   [1]
 
 Restore HGRCPATH
 
   $ HGRCPATH=$ORGHGRCPATH
   $ export HGRCPATH
 
 Commands handling multiple repositories at a time should invoke only
 "reposetup()" of extensions enabling in the target repository.
 
   $ mkdir reposetup-test
   $ cd reposetup-test
 
   $ cat > $TESTTMP/reposetuptest.py <<EOF
   > from mercurial import extensions
   > def reposetup(ui, repo):
   >     ui.write(b'reposetup() for %s\n' % (repo.root))
   >     ui.flush()
   > EOF
   $ hg init src
   $ echo a > src/a
   $ hg -R src commit -Am '#0 at src/a'
   adding a
   $ echo '[extensions]' >> src/.hg/hgrc
   $ echo '# enable extension locally' >> src/.hg/hgrc
   $ echo "reposetuptest = $TESTTMP/reposetuptest.py" >> src/.hg/hgrc
   $ hg -R src status
   reposetup() for $TESTTMP/reposetup-test/src
   reposetup() for $TESTTMP/reposetup-test/src (chg !)
 
 #if no-extraextensions
   $ hg --cwd src debugextensions
   reposetup() for $TESTTMP/reposetup-test/src
   dodo (untested!)
   dudu (untested!)
   mq
   reposetuptest (untested!)
   strip
 #endif
 
   $ hg clone -U src clone-dst1
   reposetup() for $TESTTMP/reposetup-test/src
   $ hg init push-dst1
   $ hg -q -R src push push-dst1
   reposetup() for $TESTTMP/reposetup-test/src
   $ hg init pull-src1
   $ hg -q -R pull-src1 pull src
   reposetup() for $TESTTMP/reposetup-test/src
 
   $ cat <<EOF >> $HGRCPATH
   > [extensions]
   > # disable extension globally and explicitly
   > reposetuptest = !
   > EOF
   $ hg clone -U src clone-dst2
   reposetup() for $TESTTMP/reposetup-test/src
   $ hg init push-dst2
   $ hg -q -R src push push-dst2
   reposetup() for $TESTTMP/reposetup-test/src
   $ hg init pull-src2
   $ hg -q -R pull-src2 pull src
   reposetup() for $TESTTMP/reposetup-test/src
 
   $ cat <<EOF >> $HGRCPATH
   > [extensions]
   > # enable extension globally
   > reposetuptest = $TESTTMP/reposetuptest.py
   > EOF
   $ hg clone -U src clone-dst3
   reposetup() for $TESTTMP/reposetup-test/src
   reposetup() for $TESTTMP/reposetup-test/clone-dst3
   $ hg init push-dst3
   reposetup() for $TESTTMP/reposetup-test/push-dst3
   $ hg -q -R src push push-dst3
   reposetup() for $TESTTMP/reposetup-test/src
   reposetup() for $TESTTMP/reposetup-test/push-dst3
   $ hg init pull-src3
   reposetup() for $TESTTMP/reposetup-test/pull-src3
   $ hg -q -R pull-src3 pull src
   reposetup() for $TESTTMP/reposetup-test/pull-src3
   reposetup() for $TESTTMP/reposetup-test/src
 
   $ echo '[extensions]' >> src/.hg/hgrc
   $ echo '# disable extension locally' >> src/.hg/hgrc
   $ echo 'reposetuptest = !' >> src/.hg/hgrc
   $ hg clone -U src clone-dst4
   reposetup() for $TESTTMP/reposetup-test/clone-dst4
   $ hg init push-dst4
   reposetup() for $TESTTMP/reposetup-test/push-dst4
   $ hg -q -R src push push-dst4
   reposetup() for $TESTTMP/reposetup-test/push-dst4
   $ hg init pull-src4
   reposetup() for $TESTTMP/reposetup-test/pull-src4
   $ hg -q -R pull-src4 pull src
   reposetup() for $TESTTMP/reposetup-test/pull-src4
 
 disabling in command line overlays with all configuration
   $ hg --config extensions.reposetuptest=! clone -U src clone-dst5
   $ hg --config extensions.reposetuptest=! init push-dst5
   $ hg --config extensions.reposetuptest=! -q -R src push push-dst5
   $ hg --config extensions.reposetuptest=! init pull-src5
   $ hg --config extensions.reposetuptest=! -q -R pull-src5 pull src
 
   $ cat <<EOF >> $HGRCPATH
   > [extensions]
   > # disable extension globally and explicitly
   > reposetuptest = !
   > EOF
   $ hg init parent
   $ hg init parent/sub1
   $ echo 1 > parent/sub1/1
   $ hg -R parent/sub1 commit -Am '#0 at parent/sub1'
   adding 1
   $ hg init parent/sub2
   $ hg init parent/sub2/sub21
   $ echo 21 > parent/sub2/sub21/21
   $ hg -R parent/sub2/sub21 commit -Am '#0 at parent/sub2/sub21'
   adding 21
   $ cat > parent/sub2/.hgsub <<EOF
   > sub21 = sub21
   > EOF
   $ hg -R parent/sub2 commit -Am '#0 at parent/sub2'
   adding .hgsub
   $ hg init parent/sub3
   $ echo 3 > parent/sub3/3
   $ hg -R parent/sub3 commit -Am '#0 at parent/sub3'
   adding 3
   $ cat > parent/.hgsub <<EOF
   > sub1 = sub1
   > sub2 = sub2
   > sub3 = sub3
   > EOF
   $ hg -R parent commit -Am '#0 at parent'
   adding .hgsub
   $ echo '[extensions]' >> parent/.hg/hgrc
   $ echo '# enable extension locally' >> parent/.hg/hgrc
   $ echo "reposetuptest = $TESTTMP/reposetuptest.py" >> parent/.hg/hgrc
   $ cp parent/.hg/hgrc parent/sub2/.hg/hgrc
   $ hg -R parent status -S -A
   reposetup() for $TESTTMP/reposetup-test/parent
   reposetup() for $TESTTMP/reposetup-test/parent/sub2
   C .hgsub
   C .hgsubstate
   C sub1/1
   C sub2/.hgsub
   C sub2/.hgsubstate
   C sub2/sub21/21
   C sub3/3
 
   $ cd ..
 
 Prohibit registration of commands that don't use @command (issue5137)
 
   $ hg init deprecated
   $ cd deprecated
 
   $ cat <<EOF > deprecatedcmd.py
   > def deprecatedcmd(repo, ui):
   >     pass
   > cmdtable = {
   >     b'deprecatedcmd': (deprecatedcmd, [], b''),
   > }
   > EOF
   $ cat <<EOF > .hg/hgrc
   > [extensions]
   > deprecatedcmd = `pwd`/deprecatedcmd.py
   > mq = !
   > hgext.mq = !
   > hgext/mq = !
   > EOF
 
   $ hg deprecatedcmd > /dev/null
   *** failed to import extension deprecatedcmd from $TESTTMP/deprecated/deprecatedcmd.py: missing attributes: norepo, optionalrepo, inferrepo
   *** (use @command decorator to register 'deprecatedcmd')
   hg: unknown command 'deprecatedcmd'
   (use 'hg help' for a list of commands)
-  [255]
+  [10]
 
  the extension shouldn't be loaded at all so the mq works:
 
   $ hg qseries --config extensions.mq= > /dev/null
   *** failed to import extension deprecatedcmd from $TESTTMP/deprecated/deprecatedcmd.py: missing attributes: norepo, optionalrepo, inferrepo
   *** (use @command decorator to register 'deprecatedcmd')
 
   $ cd ..
 
 Test synopsis and docstring extending
 
   $ hg init exthelp
   $ cat > exthelp.py <<EOF
   > from mercurial import commands, extensions
   > def exbookmarks(orig, *args, **opts):
   >     return orig(*args, **opts)
   > def uisetup(ui):
   >     synopsis = b' GREPME [--foo] [-x]'
   >     docstring = '''
   >     GREPME make sure that this is in the help!
   >     '''
   >     extensions.wrapcommand(commands.table, b'bookmarks', exbookmarks,
   >                            synopsis, docstring)
   > EOF
   $ abspath=`pwd`/exthelp.py
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "exthelp = $abspath" >> $HGRCPATH
   $ cd exthelp
   $ hg help bookmarks | grep GREPME
   hg bookmarks [OPTIONS]... [NAME]... GREPME [--foo] [-x]
       GREPME make sure that this is in the help!
   $ cd ..
 
 Prohibit the use of unicode strings as the default value of options
 
   $ hg init $TESTTMP/opt-unicode-default
 
   $ cat > $TESTTMP/test_unicode_default_value.py << EOF
   > from __future__ import print_function
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'dummy', [(b'', b'opt', u'value', u'help')], 'ext [OPTIONS]')
   > def ext(*args, **opts):
   >     print(opts[b'opt'], flush=True)
   > EOF
   $ "$PYTHON" $TESTTMP/unflush.py $TESTTMP/test_unicode_default_value.py
   $ cat > $TESTTMP/opt-unicode-default/.hg/hgrc << EOF
   > [extensions]
   > test_unicode_default_value = $TESTTMP/test_unicode_default_value.py
   > EOF
   $ hg -R $TESTTMP/opt-unicode-default dummy
   *** failed to import extension test_unicode_default_value from $TESTTMP/test_unicode_default_value.py: unicode *'value' found in cmdtable.dummy (glob)
   *** (use b'' to make it byte string)
   hg: unknown command 'dummy'
   (did you mean summary?)
-  [255]
+  [10]

tests/test-fastannotate.t

@@ -1,261 +1,261 b''
   $ cat >> $HGRCPATH << EOF
   > [extensions]
   > fastannotate=
   > EOF
 
   $ hg init repo
   $ cd repo
 
 a simple merge case
 
   $ echo 1 > a
   $ hg commit -qAm 'append 1'
   $ echo 2 >> a
   $ hg commit -m 'append 2'
   $ echo 3 >> a
   $ hg commit -m 'append 3'
   $ hg up 1 -q
   $ cat > a << EOF
   > 0
   > 1
   > 2
   > EOF
   $ hg commit -qm 'insert 0'
   $ hg merge 2 -q
   $ echo 4 >> a
   $ hg commit -m merge
   $ hg log -G -T '{rev}: {desc}'
   @    4: merge
   |\
   | o  3: insert 0
   | |
   o |  2: append 3
   |/
   o  1: append 2
   |
   o  0: append 1
   
   $ hg fastannotate a
   3: 0
   0: 1
   1: 2
   2: 3
   4: 4
   $ hg fastannotate -r 0 a
   0: 1
   $ hg fastannotate -r 1 a
   0: 1
   1: 2
   $ hg fastannotate -udnclf a
   test 3 d641cb51f61e Thu Jan 01 00:00:00 1970 +0000 a:1: 0
   test 0 4994017376d3 Thu Jan 01 00:00:00 1970 +0000 a:1: 1
   test 1 e940cb6d9a06 Thu Jan 01 00:00:00 1970 +0000 a:2: 2
   test 2 26162a884ba6 Thu Jan 01 00:00:00 1970 +0000 a:3: 3
   test 4 3ad7bcd2815f Thu Jan 01 00:00:00 1970 +0000 a:5: 4
   $ hg fastannotate --linear a
   3: 0
   0: 1
   1: 2
   4: 3
   4: 4
 
 incrementally updating
 
   $ hg fastannotate -r 0 a --debug
   fastannotate: a: using fast path (resolved fctx: True)
   0: 1
   $ hg fastannotate -r 0 a --debug --rebuild
   fastannotate: a: 1 new changesets in the main branch
   0: 1
   $ hg fastannotate -r 1 a --debug
   fastannotate: a: 1 new changesets in the main branch
   0: 1
   1: 2
   $ hg fastannotate -r 3 a --debug
   fastannotate: a: 1 new changesets in the main branch
   3: 0
   0: 1
   1: 2
   $ hg fastannotate -r 4 a --debug
   fastannotate: a: 1 new changesets in the main branch
   3: 0
   0: 1
   1: 2
   2: 3
   4: 4
   $ hg fastannotate -r 1 a --debug
   fastannotate: a: using fast path (resolved fctx: True)
   0: 1
   1: 2
 
 rebuild happens automatically if unable to update
 
   $ hg fastannotate -r 2 a --debug
   fastannotate: a: cache broken and deleted
   fastannotate: a: 3 new changesets in the main branch
   0: 1
   1: 2
   2: 3
 
 config option "fastannotate.mainbranch"
 
   $ hg fastannotate -r 1 --rebuild --config fastannotate.mainbranch=tip a --debug
   fastannotate: a: 4 new changesets in the main branch
   0: 1
   1: 2
   $ hg fastannotate -r 4 a --debug
   fastannotate: a: using fast path (resolved fctx: True)
   3: 0
   0: 1
   1: 2
   2: 3
   4: 4
 
 config option "fastannotate.modes"
 
   $ hg annotate -r 1 --debug a
   0: 1
   1: 2
   $ hg annotate --config fastannotate.modes=fctx -r 1 --debug a
   fastannotate: a: using fast path (resolved fctx: False)
   0: 1
   1: 2
   $ hg fastannotate --config fastannotate.modes=fctx -h -q
   hg: unknown command 'fastannotate'
   (did you mean *) (glob)
-  [255]
+  [10]
 
 rename
 
   $ hg mv a b
   $ cat > b << EOF
   > 0
   > 11
   > 3
   > 44
   > EOF
   $ hg commit -m b -q
   $ hg fastannotate -ncf --long-hash b
   3 d641cb51f61e331c44654104301f8154d7865c89 a: 0
   5 d44dade239915bc82b91e4556b1257323f8e5824 b: 11
   2 26162a884ba60e8c87bf4e0d6bb8efcc6f711a4e a: 3
   5 d44dade239915bc82b91e4556b1257323f8e5824 b: 44
   $ hg fastannotate -r 26162a884ba60e8c87bf4e0d6bb8efcc6f711a4e a
   0: 1
   1: 2
   2: 3
 
 fastannotate --deleted
 
   $ hg fastannotate --deleted -nf b
   3 a:  0
   5 b:  11
   0 a: -1
   1 a: -2
   2 a:  3
   5 b:  44
   4 a: -4
   $ hg fastannotate --deleted -r 3 -nf a
   3 a:  0
   0 a:  1
   1 a:  2
 
 file and directories with ".l", ".m" suffixes
 
   $ cd ..
   $ hg init repo2
   $ cd repo2
 
   $ mkdir a.l b.m c.lock a.l.hg b.hg
   $ for i in a b c d d.l d.m a.l/a b.m/a c.lock/a a.l.hg/a b.hg/a; do
   >   echo $i > $i
   > done
   $ hg add . -q
   $ hg commit -m init
   $ hg fastannotate a.l/a b.m/a c.lock/a a.l.hg/a b.hg/a d.l d.m a b c d
   0: a
   0: a.l.hg/a
   0: a.l/a
   0: b
   0: b.hg/a
   0: b.m/a
   0: c
   0: c.lock/a
   0: d
   0: d.l
   0: d.m
 
 empty file
 
   $ touch empty
   $ hg commit -A empty -m empty
   $ hg fastannotate empty
 
 json format
 
   $ hg fastannotate -Tjson -cludn b a empty
   [
    {
     "date": [0.0, 0],
     "line": "a\n",
     "line_number": 1,
     "node": "1fd620b16252aecb54c6aa530dff5ed6e6ec3d21",
     "rev": 0,
     "user": "test"
    },
    {
     "date": [0.0, 0],
     "line": "b\n",
     "line_number": 1,
     "node": "1fd620b16252aecb54c6aa530dff5ed6e6ec3d21",
     "rev": 0,
     "user": "test"
    }
   ]
 
   $ hg fastannotate -Tjson -cludn empty
   [
   ]
   $ hg fastannotate -Tjson --no-content -n a
   [
    {
     "rev": 0
    }
   ]
 
 working copy
 
   $ echo a >> a
   $ hg fastannotate -r 'wdir()' a
   abort: cannot update linelog to wdir()
   (set fastannotate.mainbranch)
   [255]
   $ cat >> $HGRCPATH << EOF
   > [fastannotate]
   > mainbranch = .
   > EOF
   $ hg fastannotate -r 'wdir()' a
   0 : a
   1+: a
   $ hg fastannotate -cludn -r 'wdir()' a
   test 0 1fd620b16252  Thu Jan 01 00:00:00 1970 +0000:1: a
   test 1 720582f5bdb6+ *:2: a (glob)
   $ hg fastannotate -cludn -r 'wdir()' -Tjson a
   [
    {
     "date": [0.0, 0],
     "line": "a\n",
     "line_number": 1,
     "node": "1fd620b16252aecb54c6aa530dff5ed6e6ec3d21",
     "rev": 0,
     "user": "test"
    },
    {
     "date": [*, 0], (glob)
     "line": "a\n",
     "line_number": 2,
     "node": null,
     "rev": null,
     "user": "test"
    }
   ]

tests/test-help.t

@@ -1,3932 +1,3932 b''
 Short help:
 
   $ hg
   Mercurial Distributed SCM
   
   basic commands:
   
    add           add the specified files on the next commit
    annotate      show changeset information by line for each file
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    forget        forget the specified files on the next commit
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    merge         merge another revision into working directory
    pull          pull changes from the specified source
    push          push changes to the specified destination
    remove        remove the specified files on the next commit
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    update        update working directory (or switch revisions)
   
   (use 'hg help' for the full list of commands or 'hg -v' for details)
 
   $ hg -q
    add           add the specified files on the next commit
    annotate      show changeset information by line for each file
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    forget        forget the specified files on the next commit
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    merge         merge another revision into working directory
    pull          pull changes from the specified source
    push          push changes to the specified destination
    remove        remove the specified files on the next commit
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    update        update working directory (or switch revisions)
 
 Extra extensions will be printed in help output in a non-reliable order since
 the extension is unknown.
 #if no-extraextensions
 
   $ hg help
   Mercurial Distributed SCM
   
   list of commands:
   
   Repository creation:
   
    clone         make a copy of an existing repository
    init          create a new repository in the given directory
   
   Remote repository management:
   
    incoming      show new changesets found in source
    outgoing      show changesets not found in the destination
    paths         show aliases for remote repositories
    pull          pull changes from the specified source
    push          push changes to the specified destination
    serve         start stand-alone webserver
   
   Change creation:
   
    commit        commit the specified files or all outstanding changes
   
   Change manipulation:
   
    backout       reverse effect of earlier changeset
    graft         copy changes from other branches onto the current branch
    merge         merge another revision into working directory
   
   Change organization:
   
    bookmarks     create a new bookmark or list existing bookmarks
    branch        set or show the current branch name
    branches      list repository named branches
    phase         set or show the current phase name
    tag           add one or more tags for the current or given revision
    tags          list repository tags
   
   File content management:
   
    annotate      show changeset information by line for each file
    cat           output the current or given revision of files
    copy          mark files as copied for the next commit
    diff          diff repository (or selected files)
    grep          search for a pattern in specified files
   
   Change navigation:
   
    bisect        subdivision search of changesets
    heads         show branch heads
    identify      identify the working directory or specified revision
    log           show revision history of entire repository or files
   
   Working directory management:
   
    add           add the specified files on the next commit
    addremove     add all new files, delete all missing files
    files         list tracked files
    forget        forget the specified files on the next commit
    remove        remove the specified files on the next commit
    rename        rename files; equivalent of copy + remove
    resolve       redo merges or set/view the merge status of files
    revert        restore files to their checkout state
    root          print the root (top) of the current working directory
    shelve        save and set aside changes from the working directory
    status        show changed files in the working directory
    summary       summarize working directory state
    unshelve      restore a shelved change to the working directory
    update        update working directory (or switch revisions)
   
   Change import/export:
   
    archive       create an unversioned archive of a repository revision
    bundle        create a bundle file
    export        dump the header and diffs for one or more changesets
    import        import an ordered set of patches
    unbundle      apply one or more bundle files
   
   Repository maintenance:
   
    manifest      output the current or given revision of the project manifest
    recover       roll back an interrupted transaction
    verify        verify the integrity of the repository
   
   Help:
   
    config        show combined config settings from all hgrc files
    help          show help for a given topic or a help overview
    version       output version and copyright information
   
   additional help topics:
   
   Mercurial identifiers:
   
    filesets      Specifying File Sets
    hgignore      Syntax for Mercurial Ignore Files
    patterns      File Name Patterns
    revisions     Specifying Revisions
    urls          URL Paths
   
   Mercurial output:
   
    color         Colorizing Outputs
    dates         Date Formats
    diffs         Diff Formats
    templating    Template Usage
   
   Mercurial configuration:
   
    config        Configuration Files
    environment   Environment Variables
    extensions    Using Additional Features
    flags         Command-line flags
    hgweb         Configuring hgweb
    merge-tools   Merge Tools
    pager         Pager Support
   
   Concepts:
   
    bundlespec    Bundle File Formats
    glossary      Glossary
    phases        Working with Phases
    subrepos      Subrepositories
   
   Miscellaneous:
   
    deprecated    Deprecated Features
    internals     Technical implementation topics
    scripting     Using Mercurial from scripts and automation
   
   (use 'hg help -v' to show built-in aliases and global options)
 
   $ hg -q help
   Repository creation:
   
    clone         make a copy of an existing repository
    init          create a new repository in the given directory
   
   Remote repository management:
   
    incoming      show new changesets found in source
    outgoing      show changesets not found in the destination
    paths         show aliases for remote repositories
    pull          pull changes from the specified source
    push          push changes to the specified destination
    serve         start stand-alone webserver
   
   Change creation:
   
    commit        commit the specified files or all outstanding changes
   
   Change manipulation:
   
    backout       reverse effect of earlier changeset
    graft         copy changes from other branches onto the current branch
    merge         merge another revision into working directory
   
   Change organization:
   
    bookmarks     create a new bookmark or list existing bookmarks
    branch        set or show the current branch name
    branches      list repository named branches
    phase         set or show the current phase name
    tag           add one or more tags for the current or given revision
    tags          list repository tags
   
   File content management:
   
    annotate      show changeset information by line for each file
    cat           output the current or given revision of files
    copy          mark files as copied for the next commit
    diff          diff repository (or selected files)
    grep          search for a pattern in specified files
   
   Change navigation:
   
    bisect        subdivision search of changesets
    heads         show branch heads
    identify      identify the working directory or specified revision
    log           show revision history of entire repository or files
   
   Working directory management:
   
    add           add the specified files on the next commit
    addremove     add all new files, delete all missing files
    files         list tracked files
    forget        forget the specified files on the next commit
    remove        remove the specified files on the next commit
    rename        rename files; equivalent of copy + remove
    resolve       redo merges or set/view the merge status of files
    revert        restore files to their checkout state
    root          print the root (top) of the current working directory
    shelve        save and set aside changes from the working directory
    status        show changed files in the working directory
    summary       summarize working directory state
    unshelve      restore a shelved change to the working directory
    update        update working directory (or switch revisions)
   
   Change import/export:
   
    archive       create an unversioned archive of a repository revision
    bundle        create a bundle file
    export        dump the header and diffs for one or more changesets
    import        import an ordered set of patches
    unbundle      apply one or more bundle files
   
   Repository maintenance:
   
    manifest      output the current or given revision of the project manifest
    recover       roll back an interrupted transaction
    verify        verify the integrity of the repository
   
   Help:
   
    config        show combined config settings from all hgrc files
    help          show help for a given topic or a help overview
    version       output version and copyright information
   
   additional help topics:
   
   Mercurial identifiers:
   
    filesets      Specifying File Sets
    hgignore      Syntax for Mercurial Ignore Files
    patterns      File Name Patterns
    revisions     Specifying Revisions
    urls          URL Paths
   
   Mercurial output:
   
    color         Colorizing Outputs
    dates         Date Formats
    diffs         Diff Formats
    templating    Template Usage
   
   Mercurial configuration:
   
    config        Configuration Files
    environment   Environment Variables
    extensions    Using Additional Features
    flags         Command-line flags
    hgweb         Configuring hgweb
    merge-tools   Merge Tools
    pager         Pager Support
   
   Concepts:
   
    bundlespec    Bundle File Formats
    glossary      Glossary
    phases        Working with Phases
    subrepos      Subrepositories
   
   Miscellaneous:
   
    deprecated    Deprecated Features
    internals     Technical implementation topics
    scripting     Using Mercurial from scripts and automation
 
 Test extension help:
   $ hg help extensions --config extensions.rebase= --config extensions.children=
   Using Additional Features
   """""""""""""""""""""""""
   
       Mercurial has the ability to add new features through the use of
       extensions. Extensions may add new commands, add options to existing
       commands, change the default behavior of commands, or implement hooks.
   
       To enable the "foo" extension, either shipped with Mercurial or in the
       Python search path, create an entry for it in your configuration file,
       like this:
   
         [extensions]
         foo =
   
       You may also specify the full path to an extension:
   
         [extensions]
         myfeature = ~/.hgext/myfeature.py
   
       See 'hg help config' for more information on configuration files.
   
       Extensions are not loaded by default for a variety of reasons: they can
       increase startup overhead; they may be meant for advanced usage only; they
       may provide potentially dangerous abilities (such as letting you destroy
       or modify history); they might not be ready for prime time; or they may
       alter some usual behaviors of stock Mercurial. It is thus up to the user
       to activate extensions as needed.
   
       To explicitly disable an extension enabled in a configuration file of
       broader scope, prepend its path with !:
   
         [extensions]
         # disabling extension bar residing in /path/to/extension/bar.py
         bar = !/path/to/extension/bar.py
         # ditto, but no path was supplied for extension baz
         baz = !
   
       enabled extensions:
   
        children      command to display child changesets (DEPRECATED)
        rebase        command to move sets of revisions to a different ancestor
   
       disabled extensions:
   
        acl           hooks for controlling repository access
        blackbox      log repository events to a blackbox for debugging
        bugzilla      hooks for integrating with the Bugzilla bug tracker
        censor        erase file content at a given revision
        churn         command to display statistics about repository history
        clonebundles  advertise pre-generated bundles to seed clones
        closehead     close arbitrary heads without checking them out first
        convert       import revisions from foreign VCS repositories into
                      Mercurial
        eol           automatically manage newlines in repository files
        extdiff       command to allow external programs to compare revisions
        factotum      http authentication with factotum
        fastexport    export repositories as git fast-import stream
        githelp       try mapping git commands to Mercurial commands
        gpg           commands to sign and verify changesets
        hgk           browse the repository in a graphical way
        highlight     syntax highlighting for hgweb (requires Pygments)
        histedit      interactive history editing
        keyword       expand keywords in tracked files
        largefiles    track large binary files
        mq            manage a stack of patches
        notify        hooks for sending email push notifications
        patchbomb     command to send changesets as (a series of) patch emails
        purge         command to delete untracked files from the working
                      directory
        relink        recreates hardlinks between repository clones
        schemes       extend schemes with shortcuts to repository swarms
        share         share a common history between several working directories
        transplant    command to transplant changesets from another branch
        win32mbcs     allow the use of MBCS paths with problematic encodings
        zeroconf      discover and advertise repositories on the local network
 
 #endif
 
 Verify that deprecated extensions are included if --verbose:
 
   $ hg -v help extensions | grep children
        children      command to display child changesets (DEPRECATED)
 
 Verify that extension keywords appear in help templates
 
   $ hg help --config extensions.transplant= templating|grep transplant > /dev/null
 
 Test short command list with verbose option
 
   $ hg -v help shortlist
   Mercurial Distributed SCM
   
   basic commands:
   
    abort         abort an unfinished operation (EXPERIMENTAL)
    add           add the specified files on the next commit
    annotate, blame
                  show changeset information by line for each file
    clone         make a copy of an existing repository
    commit, ci    commit the specified files or all outstanding changes
    continue      resumes an interrupted operation (EXPERIMENTAL)
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    forget        forget the specified files on the next commit
    init          create a new repository in the given directory
    log, history  show revision history of entire repository or files
    merge         merge another revision into working directory
    pull          pull changes from the specified source
    push          push changes to the specified destination
    remove, rm    remove the specified files on the next commit
    serve         start stand-alone webserver
    status, st    show changed files in the working directory
    summary, sum  summarize working directory state
    update, up, checkout, co
                  update working directory (or switch revisions)
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
   
   (use 'hg help' for the full list of commands)
 
   $ hg add -h
   hg add [OPTION]... [FILE]...
   
   add the specified files on the next commit
   
       Schedule files to be version controlled and added to the repository.
   
       The files will be added to the repository at the next commit. To undo an
       add before that, see 'hg forget'.
   
       If no names are given, add all files to the repository (except files
       matching ".hgignore").
   
       Returns 0 if all files are successfully added.
   
   options ([+] can be repeated):
   
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -n --dry-run             do not perform actions, just print output
   
   (some details hidden, use --verbose to show complete help)
 
 Verbose help for add
 
   $ hg add -hv
   hg add [OPTION]... [FILE]...
   
   add the specified files on the next commit
   
       Schedule files to be version controlled and added to the repository.
   
       The files will be added to the repository at the next commit. To undo an
       add before that, see 'hg forget'.
   
       If no names are given, add all files to the repository (except files
       matching ".hgignore").
   
       Examples:
   
         - New (unknown) files are added automatically by 'hg add':
   
             $ ls
             foo.c
             $ hg status
             ? foo.c
             $ hg add
             adding foo.c
             $ hg status
             A foo.c
   
         - Specific files to be added can be specified:
   
             $ ls
             bar.c  foo.c
             $ hg status
             ? bar.c
             ? foo.c
             $ hg add bar.c
             $ hg status
             A bar.c
             ? foo.c
   
       Returns 0 if all files are successfully added.
   
   options ([+] can be repeated):
   
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -n --dry-run             do not perform actions, just print output
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 Test the textwidth config option
 
   $ hg root -h  --config ui.textwidth=50
   hg root
   
   print the root (top) of the current working
   directory
   
       Print the root directory of the current
       repository.
   
       Returns 0 on success.
   
   options:
   
    -T --template TEMPLATE display with template
   
   (some details hidden, use --verbose to show
   complete help)
 
 Test help option with version option
 
   $ hg add -h --version
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
   $ hg add --skjdfks
   hg add: option --skjdfks not recognized
   hg add [OPTION]... [FILE]...
   
   add the specified files on the next commit
   
   options ([+] can be repeated):
   
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -n --dry-run             do not perform actions, just print output
   
   (use 'hg add -h' to show more help)
-  [255]
+  [10]
 
 Test ambiguous command help
 
   $ hg help ad
   list of commands:
   
    add           add the specified files on the next commit
    addremove     add all new files, delete all missing files
   
   (use 'hg help -v ad' to show built-in aliases and global options)
 
 Test command without options
 
   $ hg help verify
   hg verify
   
   verify the integrity of the repository
   
       Verify the integrity of the current repository.
   
       This will perform an extensive check of the repository's integrity,
       validating the hashes and checksums of each entry in the changelog,
       manifest, and tracked files, as well as the integrity of their crosslinks
       and indices.
   
       Please see https://mercurial-scm.org/wiki/RepositoryCorruption for more
       information about recovery from corruption of the repository.
   
       Returns 0 on success, 1 if errors are encountered.
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help diff
   hg diff [OPTION]... ([-c REV] | [--from REV1] [--to REV2]) [FILE]...
   
   diff repository (or selected files)
   
       Show differences between revisions for the specified files.
   
       Differences between files are shown using the unified diff format.
   
       Note:
          'hg diff' may generate unexpected results for merges, as it will
          default to comparing against the working directory's first parent
          changeset if no revisions are specified.
   
       By default, the working directory files are compared to its first parent.
       To see the differences from another revision, use --from. To see the
       difference to another revision, use --to. For example, 'hg diff --from .^'
       will show the differences from the working copy's grandparent to the
       working copy, 'hg diff --to .' will show the diff from the working copy to
       its parent (i.e. the reverse of the default), and 'hg diff --from 1.0 --to
       1.2' will show the diff between those two revisions.
   
       Alternatively you can specify -c/--change with a revision to see the
       changes in that changeset relative to its first parent (i.e. 'hg diff -c
       42' is equivalent to 'hg diff --from 42^ --to 42')
   
       Without the -a/--text option, diff will avoid generating diffs of files it
       detects as binary. With -a, diff will generate a diff anyway, probably
       with undesirable results.
   
       Use the -g/--git option to generate diffs in the git extended diff format.
       For more information, read 'hg help diffs'.
   
       Returns 0 on success.
   
   options ([+] can be repeated):
   
       --from REV1           revision to diff from
       --to REV2             revision to diff to
    -c --change REV          change made by revision
    -a --text                treat all files as text
    -g --git                 use git extended diff format
       --binary              generate binary diffs in git mode (default)
       --nodates             omit dates from diff headers
       --noprefix            omit a/ and b/ prefixes from filenames
    -p --show-function       show which function each change is in
       --reverse             produce a diff that undoes the changes
    -w --ignore-all-space    ignore white space when comparing lines
    -b --ignore-space-change ignore changes in the amount of white space
    -B --ignore-blank-lines  ignore changes whose lines are all blank
    -Z --ignore-space-at-eol ignore changes in whitespace at EOL
    -U --unified NUM         number of lines of context to show
       --stat                output diffstat-style summary of changes
       --root DIR            produce diffs relative to subdirectory
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help status
   hg status [OPTION]... [FILE]...
   
   aliases: st
   
   show changed files in the working directory
   
       Show status of files in the repository. If names are given, only files
       that match are shown. Files that are clean or ignored or the source of a
       copy/move operation, are not listed unless -c/--clean, -i/--ignored,
       -C/--copies or -A/--all are given. Unless options described with "show
       only ..." are given, the options -mardu are used.
   
       Option -q/--quiet hides untracked (unknown and ignored) files unless
       explicitly requested with -u/--unknown or -i/--ignored.
   
       Note:
          'hg status' may appear to disagree with diff if permissions have
          changed or a merge has occurred. The standard diff format does not
          report permission changes and diff only reports changes relative to one
          merge parent.
   
       If one revision is given, it is used as the base revision. If two
       revisions are given, the differences between them are shown. The --change
       option can also be used as a shortcut to list the changed files of a
       revision from its first parent.
   
       The codes used to show the status of files are:
   
         M = modified
         A = added
         R = removed
         C = clean
         ! = missing (deleted by non-hg command, but still tracked)
         ? = not tracked
         I = ignored
           = origin of the previous file (with --copies)
   
       Returns 0 on success.
   
   options ([+] can be repeated):
   
    -A --all                 show status of all files
    -m --modified            show only modified files
    -a --added               show only added files
    -r --removed             show only removed files
    -d --deleted             show only missing files
    -c --clean               show only files without changes
    -u --unknown             show only unknown (not tracked) files
    -i --ignored             show only ignored files
    -n --no-status           hide status prefix
    -C --copies              show source of copied files
    -0 --print0              end filenames with NUL, for use with xargs
       --rev REV [+]         show difference from revision
       --change REV          list the changed files of a revision
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -T --template TEMPLATE   display with template
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg -q help status
   hg status [OPTION]... [FILE]...
   
   show changed files in the working directory
 
   $ hg help foo
   abort: no such help topic: foo
   (try 'hg help --keyword foo')
   [10]
 
   $ hg skjdfks
   hg: unknown command 'skjdfks'
   (use 'hg help' for a list of commands)
-  [255]
+  [10]
 
 Typoed command gives suggestion
   $ hg puls
   hg: unknown command 'puls'
   (did you mean one of pull, push?)
-  [255]
+  [10]
 
 Not enabled extension gets suggested
 
   $ hg rebase
   hg: unknown command 'rebase'
   'rebase' is provided by the following extension:
   
       rebase        command to move sets of revisions to a different ancestor
   
   (use 'hg help extensions' for information on enabling extensions)
-  [255]
+  [10]
 
 Disabled extension gets suggested
   $ hg --config extensions.rebase=! rebase
   hg: unknown command 'rebase'
   'rebase' is provided by the following extension:
   
       rebase        command to move sets of revisions to a different ancestor
   
   (use 'hg help extensions' for information on enabling extensions)
-  [255]
+  [10]
 
 Checking that help adapts based on the config:
 
   $ hg help diff --config ui.tweakdefaults=true | egrep -e '^ *(-g|config)'
    -g --[no-]git            use git extended diff format (default: on from
                             config)
 
 Make sure that we don't run afoul of the help system thinking that
 this is a section and erroring out weirdly.
 
   $ hg .log
   hg: unknown command '.log'
   (did you mean log?)
-  [255]
+  [10]
 
   $ hg log.
   hg: unknown command 'log.'
   (did you mean log?)
-  [255]
+  [10]
   $ hg pu.lh
   hg: unknown command 'pu.lh'
   (did you mean one of pull, push?)
-  [255]
+  [10]
 
   $ cat > helpext.py <<EOF
   > import os
   > from mercurial import commands, fancyopts, registrar
   > 
   > def func(arg):
   >     return '%sfoo' % arg
   > class customopt(fancyopts.customopt):
   >     def newstate(self, oldstate, newparam, abort):
   >         return '%sbar' % oldstate
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > 
   > @command(b'nohelp',
   >     [(b'', b'longdesc', 3, b'x'*67),
   >     (b'n', b'', None, b'normal desc'),
   >     (b'', b'newline', b'', b'line1\nline2'),
   >     (b'', b'default-off', False, b'enable X'),
   >     (b'', b'default-on', True, b'enable Y'),
   >     (b'', b'callableopt', func, b'adds foo'),
   >     (b'', b'customopt', customopt(''), b'adds bar'),
   >     (b'', b'customopt-withdefault', customopt('foo'), b'adds bar')],
   >     b'hg nohelp',
   >     norepo=True)
   > @command(b'debugoptADV', [(b'', b'aopt', None, b'option is (ADVANCED)')])
   > @command(b'debugoptDEP', [(b'', b'dopt', None, b'option is (DEPRECATED)')])
   > @command(b'debugoptEXP', [(b'', b'eopt', None, b'option is (EXPERIMENTAL)')])
   > def nohelp(ui, *args, **kwargs):
   >     pass
   > 
   > @command(b'hashelp', [], b'hg hashelp', norepo=True)
   > def hashelp(ui, *args, **kwargs):
   >     """Extension command's help"""
   > 
   > def uisetup(ui):
   >     ui.setconfig(b'alias', b'shellalias', b'!echo hi', b'helpext')
   >     ui.setconfig(b'alias', b'hgalias', b'summary', b'helpext')
   >     ui.setconfig(b'alias', b'hgalias:doc', b'My doc', b'helpext')
   >     ui.setconfig(b'alias', b'hgalias:category', b'navigation', b'helpext')
   >     ui.setconfig(b'alias', b'hgaliasnodoc', b'summary', b'helpext')
   > 
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "helpext = `pwd`/helpext.py" >> $HGRCPATH
 
 Test for aliases
 
   $ hg help | grep hgalias
    hgalias       My doc
 
   $ hg help hgalias
   hg hgalias [--remote]
   
   alias for: hg summary
   
   My doc
   
   defined by: helpext
   
   options:
   
     --remote check for push and pull
   
   (some details hidden, use --verbose to show complete help)
   $ hg help hgaliasnodoc
   hg hgaliasnodoc [--remote]
   
   alias for: hg summary
   
   summarize working directory state
   
       This generates a brief summary of the working directory state, including
       parents, branch, commit status, phase and available updates.
   
       With the --remote option, this will check the default paths for incoming
       and outgoing changes. This can be time-consuming.
   
       Returns 0 on success.
   
   defined by: helpext
   
   options:
   
     --remote check for push and pull
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help shellalias
   hg shellalias
   
   shell alias for: echo hi
   
   (no help text available)
   
   defined by: helpext
   
   (some details hidden, use --verbose to show complete help)
 
 Test command with no help text
 
   $ hg help nohelp
   hg nohelp
   
   (no help text available)
   
   options:
   
       --longdesc VALUE
                                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                                     xxxxxxxxxxxxxxxxxxxxxxx (default: 3)
    -n --                            normal desc
       --newline VALUE               line1 line2
       --default-off                 enable X
       --[no-]default-on             enable Y (default: on)
       --callableopt VALUE           adds foo
       --customopt VALUE             adds bar
       --customopt-withdefault VALUE adds bar (default: foo)
   
   (some details hidden, use --verbose to show complete help)
 
 Test that default list of commands includes extension commands that have help,
 but not those that don't, except in verbose mode, when a keyword is passed, or
 when help about the extension is requested.
 
 #if no-extraextensions
 
   $ hg help | grep hashelp
    hashelp       Extension command's help
   $ hg help | grep nohelp
   [1]
   $ hg help -v | grep nohelp
    nohelp        (no help text available)
 
   $ hg help -k nohelp
   Commands:
   
    nohelp hg nohelp
   
   Extension Commands:
   
    nohelp (no help text available)
 
   $ hg help helpext
   helpext extension - no help text available
   
   list of commands:
   
    hashelp       Extension command's help
    nohelp        (no help text available)
   
   (use 'hg help -v helpext' to show built-in aliases and global options)
 
 #endif
 
 Test list of internal help commands
 
   $ hg help debug
   debug commands (internal and unsupported):
   
    debugancestor
                  find the ancestor revision of two revisions in a given index
    debugantivirusrunning
                  attempt to trigger an antivirus scanner to see if one is active
    debugapplystreamclonebundle
                  apply a stream clone bundle file
    debugbackupbundle
                  lists the changesets available in backup bundles
    debugbuilddag
                  builds a repo with a given DAG from scratch in the current
                  empty repo
    debugbundle   lists the contents of a bundle
    debugcapabilities
                  lists the capabilities of a remote peer
    debugchangedfiles
                  list the stored files changes for a revision
    debugcheckstate
                  validate the correctness of the current dirstate
    debugcolor    show available color, effects or style
    debugcommands
                  list all available commands and options
    debugcomplete
                  returns the completion list associated with the given command
    debugcreatestreamclonebundle
                  create a stream clone bundle file
    debugdag      format the changelog or an index DAG as a concise textual
                  description
    debugdata     dump the contents of a data file revision
    debugdate     parse and display a date
    debugdeltachain
                  dump information about delta chains in a revlog
    debugdirstate
                  show the contents of the current dirstate
    debugdiscovery
                  runs the changeset discovery protocol in isolation
    debugdownload
                  download a resource using Mercurial logic and config
    debugextensions
                  show information about active extensions
    debugfileset  parse and apply a fileset specification
    debugformat   display format information about the current repository
    debugfsinfo   show information detected about current filesystem
    debuggetbundle
                  retrieves a bundle from a repo
    debugignore   display the combined ignore pattern and information about
                  ignored files
    debugindex    dump index data for a storage primitive
    debugindexdot
                  dump an index DAG as a graphviz dot file
    debugindexstats
                  show stats related to the changelog index
    debuginstall  test Mercurial installation
    debugknown    test whether node ids are known to a repo
    debuglocks    show or modify state of locks
    debugmanifestfulltextcache
                  show, clear or amend the contents of the manifest fulltext
                  cache
    debugmergestate
                  print merge state
    debugnamecomplete
                  complete "names" - tags, open branch names, bookmark names
    debugnodemap  write and inspect on disk nodemap
    debugobsolete
                  create arbitrary obsolete marker
    debugoptADV   (no help text available)
    debugoptDEP   (no help text available)
    debugoptEXP   (no help text available)
    debugp1copies
                  dump copy information compared to p1
    debugp2copies
                  dump copy information compared to p2
    debugpathcomplete
                  complete part or all of a tracked path
    debugpathcopies
                  show copies between two revisions
    debugpeer     establish a connection to a peer repository
    debugpickmergetool
                  examine which merge tool is chosen for specified file
    debugpushkey  access the pushkey key/value protocol
    debugpvec     (no help text available)
    debugrebuilddirstate
                  rebuild the dirstate as it would look like for the given
                  revision
    debugrebuildfncache
                  rebuild the fncache file
    debugrename   dump rename information
    debugrequires
                  print the current repo requirements
    debugrevlog   show data and statistics about a revlog
    debugrevlogindex
                  dump the contents of a revlog index
    debugrevspec  parse and apply a revision specification
    debugserve    run a server with advanced settings
    debugsetparents
                  manually set the parents of the current working directory
                  (DANGEROUS)
    debugsidedata
                  dump the side data for a cl/manifest/file revision
    debugssl      test a secure connection to a server
    debugstrip    strip changesets and all their descendants from the repository
    debugsub      (no help text available)
    debugsuccessorssets
                  show set of successors for revision
    debugtagscache
                  display the contents of .hg/cache/hgtagsfnodes1
    debugtemplate
                  parse and apply a template
    debuguigetpass
                  show prompt to type password
    debuguiprompt
                  show plain prompt
    debugupdatecaches
                  warm all known caches in the repository
    debugupgraderepo
                  upgrade a repository to use different features
    debugwalk     show how files match on given patterns
    debugwhyunstable
                  explain instabilities of a changeset
    debugwireargs
                  (no help text available)
    debugwireproto
                  send wire protocol commands to a server
   
   (use 'hg help -v debug' to show built-in aliases and global options)
 
 internals topic renders index of available sub-topics
 
   $ hg help internals
   Technical implementation topics
   """""""""""""""""""""""""""""""
   
       To access a subtopic, use "hg help internals.{subtopic-name}"
   
        bid-merge     Bid Merge Algorithm
        bundle2       Bundle2
        bundles       Bundles
        cbor          CBOR
        censor        Censor
        changegroups  Changegroups
        config        Config Registrar
        extensions    Extension API
        mergestate    Mergestate
        requirements  Repository Requirements
        revlogs       Revision Logs
        wireprotocol  Wire Protocol
        wireprotocolrpc
                      Wire Protocol RPC
        wireprotocolv2
                      Wire Protocol Version 2
 
 sub-topics can be accessed
 
   $ hg help internals.changegroups
   Changegroups
   """"""""""""
   
       Changegroups are representations of repository revlog data, specifically
       the changelog data, root/flat manifest data, treemanifest data, and
       filelogs.
   
       There are 3 versions of changegroups: "1", "2", and "3". From a high-
       level, versions "1" and "2" are almost exactly the same, with the only
       difference being an additional item in the *delta header*. Version "3"
       adds support for storage flags in the *delta header* and optionally
       exchanging treemanifests (enabled by setting an option on the
       "changegroup" part in the bundle2).
   
       Changegroups when not exchanging treemanifests consist of 3 logical
       segments:
   
         +---------------------------------+
         |           |          |          |
         | changeset | manifest | filelogs |
         |           |          |          |
         |           |          |          |
         +---------------------------------+
   
       When exchanging treemanifests, there are 4 logical segments:
   
         +-------------------------------------------------+
         |           |          |               |          |
         | changeset |   root   | treemanifests | filelogs |
         |           | manifest |               |          |
         |           |          |               |          |
         +-------------------------------------------------+
   
       The principle building block of each segment is a *chunk*. A *chunk* is a
       framed piece of data:
   
         +---------------------------------------+
         |           |                           |
         |  length   |           data            |
         | (4 bytes) |   (<length - 4> bytes)    |
         |           |                           |
         +---------------------------------------+
   
       All integers are big-endian signed integers. Each chunk starts with a
       32-bit integer indicating the length of the entire chunk (including the
       length field itself).
   
       There is a special case chunk that has a value of 0 for the length
       ("0x00000000"). We call this an *empty chunk*.
   
       Delta Groups
       ============
   
       A *delta group* expresses the content of a revlog as a series of deltas,
       or patches against previous revisions.
   
       Delta groups consist of 0 or more *chunks* followed by the *empty chunk*
       to signal the end of the delta group:
   
         +------------------------------------------------------------------------+
         |                |             |               |             |           |
         | chunk0 length  | chunk0 data | chunk1 length | chunk1 data |    0x0    |
         |   (4 bytes)    |  (various)  |   (4 bytes)   |  (various)  | (4 bytes) |
         |                |             |               |             |           |
         +------------------------------------------------------------------------+
   
       Each *chunk*'s data consists of the following:
   
         +---------------------------------------+
         |                        |              |
         |     delta header       |  delta data  |
         |  (various by version)  |  (various)   |
         |                        |              |
         +---------------------------------------+
   
       The *delta data* is a series of *delta*s that describe a diff from an
       existing entry (either that the recipient already has, or previously
       specified in the bundle/changegroup).
   
       The *delta header* is different between versions "1", "2", and "3" of the
       changegroup format.
   
       Version 1 (headerlen=80):
   
         +------------------------------------------------------+
         |            |             |             |             |
         |    node    |   p1 node   |   p2 node   |  link node  |
         | (20 bytes) |  (20 bytes) |  (20 bytes) |  (20 bytes) |
         |            |             |             |             |
         +------------------------------------------------------+
   
       Version 2 (headerlen=100):
   
         +------------------------------------------------------------------+
         |            |             |             |            |            |
         |    node    |   p1 node   |   p2 node   | base node  | link node  |
         | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) |
         |            |             |             |            |            |
         +------------------------------------------------------------------+
   
       Version 3 (headerlen=102):
   
         +------------------------------------------------------------------------------+
         |            |             |             |            |            |           |
         |    node    |   p1 node   |   p2 node   | base node  | link node  |   flags   |
         | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) | (2 bytes) |
         |            |             |             |            |            |           |
         +------------------------------------------------------------------------------+
   
       The *delta data* consists of "chunklen - 4 - headerlen" bytes, which
       contain a series of *delta*s, densely packed (no separators). These deltas
       describe a diff from an existing entry (either that the recipient already
       has, or previously specified in the bundle/changegroup). The format is
       described more fully in "hg help internals.bdiff", but briefly:
   
         +---------------------------------------------------------------+
         |              |            |            |                      |
         | start offset | end offset | new length |        content       |
         |  (4 bytes)   |  (4 bytes) |  (4 bytes) | (<new length> bytes) |
         |              |            |            |                      |
         +---------------------------------------------------------------+
   
       Please note that the length field in the delta data does *not* include
       itself.
   
       In version 1, the delta is always applied against the previous node from
       the changegroup or the first parent if this is the first entry in the
       changegroup.
   
       In version 2 and up, the delta base node is encoded in the entry in the
       changegroup. This allows the delta to be expressed against any parent,
       which can result in smaller deltas and more efficient encoding of data.
   
       The *flags* field holds bitwise flags affecting the processing of revision
       data. The following flags are defined:
   
       32768
          Censored revision. The revision's fulltext has been replaced by censor
          metadata. May only occur on file revisions.
   
       16384
          Ellipsis revision. Revision hash does not match data (likely due to
          rewritten parents).
   
       8192
          Externally stored. The revision fulltext contains "key:value" "\n"
          delimited metadata defining an object stored elsewhere. Used by the LFS
          extension.
   
       For historical reasons, the integer values are identical to revlog version
       1 per-revision storage flags and correspond to bits being set in this
       2-byte field. Bits were allocated starting from the most-significant bit,
       hence the reverse ordering and allocation of these flags.
   
       Changeset Segment
       =================
   
       The *changeset segment* consists of a single *delta group* holding
       changelog data. The *empty chunk* at the end of the *delta group* denotes
       the boundary to the *manifest segment*.
   
       Manifest Segment
       ================
   
       The *manifest segment* consists of a single *delta group* holding manifest
       data. If treemanifests are in use, it contains only the manifest for the
       root directory of the repository. Otherwise, it contains the entire
       manifest data. The *empty chunk* at the end of the *delta group* denotes
       the boundary to the next segment (either the *treemanifests segment* or
       the *filelogs segment*, depending on version and the request options).
   
       Treemanifests Segment
       ---------------------
   
       The *treemanifests segment* only exists in changegroup version "3", and
       only if the 'treemanifest' param is part of the bundle2 changegroup part
       (it is not possible to use changegroup version 3 outside of bundle2).
       Aside from the filenames in the *treemanifests segment* containing a
       trailing "/" character, it behaves identically to the *filelogs segment*
       (see below). The final sub-segment is followed by an *empty chunk*
       (logically, a sub-segment with filename size 0). This denotes the boundary
       to the *filelogs segment*.
   
       Filelogs Segment
       ================
   
       The *filelogs segment* consists of multiple sub-segments, each
       corresponding to an individual file whose data is being described:
   
         +--------------------------------------------------+
         |          |          |          |     |           |
         | filelog0 | filelog1 | filelog2 | ... |    0x0    |
         |          |          |          |     | (4 bytes) |
         |          |          |          |     |           |
         +--------------------------------------------------+
   
       The final filelog sub-segment is followed by an *empty chunk* (logically,
       a sub-segment with filename size 0). This denotes the end of the segment
       and of the overall changegroup.
   
       Each filelog sub-segment consists of the following:
   
         +------------------------------------------------------+
         |                 |                      |             |
         | filename length |       filename       | delta group |
         |    (4 bytes)    | (<length - 4> bytes) |  (various)  |
         |                 |                      |             |
         +------------------------------------------------------+
   
       That is, a *chunk* consisting of the filename (not terminated or padded)
       followed by N chunks constituting the *delta group* for this file. The
       *empty chunk* at the end of each *delta group* denotes the boundary to the
       next filelog sub-segment.
 
 non-existent subtopics print an error
 
   $ hg help internals.foo
   abort: no such help topic: internals.foo
   (try 'hg help --keyword foo')
   [10]
 
 test advanced, deprecated and experimental options are hidden in command help
   $ hg help debugoptADV
   hg debugoptADV
   
   (no help text available)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
   $ hg help debugoptDEP
   hg debugoptDEP
   
   (no help text available)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help debugoptEXP
   hg debugoptEXP
   
   (no help text available)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 
 test advanced, deprecated and experimental options are shown with -v
   $ hg help -v debugoptADV | grep aopt
     --aopt option is (ADVANCED)
   $ hg help -v debugoptDEP | grep dopt
     --dopt option is (DEPRECATED)
   $ hg help -v debugoptEXP | grep eopt
     --eopt option is (EXPERIMENTAL)
 
 #if gettext
 test deprecated option is hidden with translation with untranslated description
 (use many globy for not failing on changed transaction)
   $ LANGUAGE=sv hg help debugoptDEP
   hg debugoptDEP
   
   (*) (glob)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 #endif
 
 Test commands that collide with topics (issue4240)
 
   $ hg config -hq
   hg config [-u] [NAME]...
   
   show combined config settings from all hgrc files
   $ hg showconfig -hq
   hg config [-u] [NAME]...
   
   show combined config settings from all hgrc files
 
 Test a help topic
 
   $ hg help dates
   Date Formats
   """"""""""""
   
       Some commands allow the user to specify a date, e.g.:
   
       - backout, commit, import, tag: Specify the commit date.
       - log, revert, update: Select revision(s) by date.
   
       Many date formats are valid. Here are some examples:
   
       - "Wed Dec 6 13:18:29 2006" (local timezone assumed)
       - "Dec 6 13:18 -0600" (year assumed, time offset provided)
       - "Dec 6 13:18 UTC" (UTC and GMT are aliases for +0000)
       - "Dec 6" (midnight)
       - "13:18" (today assumed)
       - "3:39" (3:39AM assumed)
       - "3:39pm" (15:39)
       - "2006-12-06 13:18:29" (ISO 8601 format)
       - "2006-12-6 13:18"
       - "2006-12-6"
       - "12-6"
       - "12/6"
       - "12/6/6" (Dec 6 2006)
       - "today" (midnight)
       - "yesterday" (midnight)
       - "now" - right now
   
       Lastly, there is Mercurial's internal format:
   
       - "1165411109 0" (Wed Dec 6 13:18:29 2006 UTC)
   
       This is the internal representation format for dates. The first number is
       the number of seconds since the epoch (1970-01-01 00:00 UTC). The second
       is the offset of the local timezone, in seconds west of UTC (negative if
       the timezone is east of UTC).
   
       The log command also accepts date ranges:
   
       - "<DATE" - at or before a given date/time
       - ">DATE" - on or after a given date/time
       - "DATE to DATE" - a date range, inclusive
       - "-DAYS" - within a given number of days from today
 
 Test repeated config section name
 
   $ hg help config.host
       "http_proxy.host"
           Host name and (optional) port of the proxy server, for example
           "myproxy:8000".
   
       "smtp.host"
           Host name of mail server, e.g. "mail.example.com".
   
 
 Test section name with dot
 
   $ hg help config.ui.username
       "ui.username"
           The committer of a changeset created when running "commit". Typically
           a person's name and email address, e.g. "Fred Widget
           <[e-mail]>". Environment variables in the username are
           expanded.
   
           (default: "$EMAIL" or "username@hostname". If the username in hgrc is
           empty, e.g. if the system admin set "username =" in the system hgrc,
           it has to be specified manually or in a different hgrc file)
   
 
   $ hg help config.annotate.git
   abort: help section not found: config.annotate.git
   [10]
 
   $ hg help config.update.check
       "commands.update.check"
           Determines what level of checking 'hg update' will perform before
           moving to a destination revision. Valid values are "abort", "none",
           "linear", and "noconflict". "abort" always fails if the working
           directory has uncommitted changes. "none" performs no checking, and
           may result in a merge with uncommitted changes. "linear" allows any
           update as long as it follows a straight line in the revision history,
           and may trigger a merge with uncommitted changes. "noconflict" will
           allow any update which would not trigger a merge with uncommitted
           changes, if any are present. (default: "linear")
   
 
   $ hg help config.commands.update.check
       "commands.update.check"
           Determines what level of checking 'hg update' will perform before
           moving to a destination revision. Valid values are "abort", "none",
           "linear", and "noconflict". "abort" always fails if the working
           directory has uncommitted changes. "none" performs no checking, and
           may result in a merge with uncommitted changes. "linear" allows any
           update as long as it follows a straight line in the revision history,
           and may trigger a merge with uncommitted changes. "noconflict" will
           allow any update which would not trigger a merge with uncommitted
           changes, if any are present. (default: "linear")
   
 
   $ hg help config.ommands.update.check
   abort: help section not found: config.ommands.update.check
   [10]
 
 Unrelated trailing paragraphs shouldn't be included
 
   $ hg help config.extramsg | grep '^$'
   
 
 Test capitalized section name
 
   $ hg help scripting.HGPLAIN > /dev/null
 
 Help subsection:
 
   $ hg help config.charsets |grep "Email example:" > /dev/null
   [1]
 
 Show nested definitions
 ("profiling.type"[break]"ls"[break]"stat"[break])
 
   $ hg help config.type | egrep '^$'|wc -l
   \s*3 (re)
 
   $ hg help config.profiling.type.ls
           "profiling.type.ls"
             Use Python's built-in instrumenting profiler. This profiler works on
             all platforms, but each line number it reports is the first line of
             a function. This restriction makes it difficult to identify the
             expensive parts of a non-trivial function.
   
 
 Separate sections from subsections
 
   $ hg help config.format | egrep '^    ("|-)|^\s*$' | uniq
       "format"
       --------
   
       "usegeneraldelta"
   
       "dotencode"
   
       "usefncache"
   
       "usestore"
   
       "sparse-revlog"
   
       "revlog-compression"
   
       "bookmarks-in-store"
   
       "profiling"
       -----------
   
       "format"
   
       "progress"
       ----------
   
       "format"
   
 
 Last item in help config.*:
 
   $ hg help config.`hg help config|grep '^    "'| \
   >       tail -1|sed 's![ "]*!!g'`| \
   >   grep 'hg help -c config' > /dev/null
   [1]
 
 note to use help -c for general hg help config:
 
   $ hg help config |grep 'hg help -c config' > /dev/null
 
 Test templating help
 
   $ hg help templating | egrep '(desc|diffstat|firstline|nonempty)  '
       desc          String. The text of the changeset description.
       diffstat      String. Statistics of changes with the following format:
       firstline     Any text. Returns the first line of text.
       nonempty      Any text. Returns '(none)' if the string is empty.
 
 Test deprecated items
 
   $ hg help -v templating | grep currentbookmark
       currentbookmark
   $ hg help templating | (grep currentbookmark || true)
 
 Test help hooks
 
   $ cat > helphook1.py <<EOF
   > from mercurial import help
   > 
   > def rewrite(ui, topic, doc):
   >     return doc + b'\nhelphook1\n'
   > 
   > def extsetup(ui):
   >     help.addtopichook(b'revisions', rewrite)
   > EOF
   $ cat > helphook2.py <<EOF
   > from mercurial import help
   > 
   > def rewrite(ui, topic, doc):
   >     return doc + b'\nhelphook2\n'
   > 
   > def extsetup(ui):
   >     help.addtopichook(b'revisions', rewrite)
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "helphook1 = `pwd`/helphook1.py" >> $HGRCPATH
   $ echo "helphook2 = `pwd`/helphook2.py" >> $HGRCPATH
   $ hg help revsets | grep helphook
       helphook1
       helphook2
 
 help -c should only show debug --debug
 
   $ hg help -c --debug|egrep debug|wc -l|egrep '^\s*0\s*$'
   [1]
 
 help -c should only show deprecated for -v
 
   $ hg help -c -v|egrep DEPRECATED|wc -l|egrep '^\s*0\s*$'
   [1]
 
 Test -s / --system
 
   $ hg help config.files -s windows |grep 'etc/mercurial' | \
   > wc -l | sed -e 's/ //g'
   0
   $ hg help config.files --system unix | grep 'USER' | \
   > wc -l | sed -e 's/ //g'
   0
 
 Test -e / -c / -k combinations
 
   $ hg help -c|egrep '^[A-Z].*:|^ debug'
   Commands:
   $ hg help -e|egrep '^[A-Z].*:|^ debug'
   Extensions:
   $ hg help -k|egrep '^[A-Z].*:|^ debug'
   Topics:
   Commands:
   Extensions:
   Extension Commands:
   $ hg help -c schemes
   abort: no such help topic: schemes
   (try 'hg help --keyword schemes')
   [10]
   $ hg help -e schemes |head -1
   schemes extension - extend schemes with shortcuts to repository swarms
   $ hg help -c -k dates |egrep '^(Topics|Extensions|Commands):'
   Commands:
   $ hg help -e -k a |egrep '^(Topics|Extensions|Commands):'
   Extensions:
   $ hg help -e -c -k date |egrep '^(Topics|Extensions|Commands):'
   Extensions:
   Commands:
   $ hg help -c commit > /dev/null
   $ hg help -e -c commit > /dev/null
   $ hg help -e commit
   abort: no such help topic: commit
   (try 'hg help --keyword commit')
   [10]
 
 Test keyword search help
 
   $ cat > prefixedname.py <<EOF
   > '''matched against word "clone"
   > '''
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "dot.dot.prefixedname = `pwd`/prefixedname.py" >> $HGRCPATH
   $ hg help -k clone
   Topics:
   
    config     Configuration Files
    extensions Using Additional Features
    glossary   Glossary
    phases     Working with Phases
    subrepos   Subrepositories
    urls       URL Paths
   
   Commands:
   
    bookmarks create a new bookmark or list existing bookmarks
    clone     make a copy of an existing repository
    paths     show aliases for remote repositories
    pull      pull changes from the specified source
    update    update working directory (or switch revisions)
   
   Extensions:
   
    clonebundles advertise pre-generated bundles to seed clones
    narrow       create clones which fetch history data for subset of files
                 (EXPERIMENTAL)
    prefixedname matched against word "clone"
    relink       recreates hardlinks between repository clones
   
   Extension Commands:
   
    qclone clone main and patch repository at same time
 
 Test unfound topic
 
   $ hg help nonexistingtopicthatwillneverexisteverever
   abort: no such help topic: nonexistingtopicthatwillneverexisteverever
   (try 'hg help --keyword nonexistingtopicthatwillneverexisteverever')
   [10]
 
 Test unfound keyword
 
   $ hg help --keyword nonexistingwordthatwillneverexisteverever
   abort: no matches
   (try 'hg help' for a list of topics)
   [10]
 
 Test omit indicating for help
 
   $ cat > addverboseitems.py <<EOF
   > r'''extension to test omit indicating.
   > 
   > This paragraph is never omitted (for extension)
   > 
   > .. container:: verbose
   > 
   >   This paragraph is omitted,
   >   if :hg:\`help\` is invoked without \`\`-v\`\` (for extension)
   > 
   > This paragraph is never omitted, too (for extension)
   > '''
   > from __future__ import absolute_import
   > from mercurial import commands, help
   > testtopic = br"""This paragraph is never omitted (for topic).
   > 
   > .. container:: verbose
   > 
   >   This paragraph is omitted,
   >   if :hg:\`help\` is invoked without \`\`-v\`\` (for topic)
   > 
   > This paragraph is never omitted, too (for topic)
   > """
   > def extsetup(ui):
   >     help.helptable.append(([b"topic-containing-verbose"],
   >                            b"This is the topic to test omit indicating.",
   >                            lambda ui: testtopic))
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "addverboseitems = `pwd`/addverboseitems.py" >> $HGRCPATH
   $ hg help addverboseitems
   addverboseitems extension - extension to test omit indicating.
   
   This paragraph is never omitted (for extension)
   
   This paragraph is never omitted, too (for extension)
   
   (some details hidden, use --verbose to show complete help)
   
   no commands defined
   $ hg help -v addverboseitems
   addverboseitems extension - extension to test omit indicating.
   
   This paragraph is never omitted (for extension)
   
   This paragraph is omitted, if 'hg help' is invoked without "-v" (for
   extension)
   
   This paragraph is never omitted, too (for extension)
   
   no commands defined
   $ hg help topic-containing-verbose
   This is the topic to test omit indicating.
   """"""""""""""""""""""""""""""""""""""""""
   
       This paragraph is never omitted (for topic).
   
       This paragraph is never omitted, too (for topic)
   
   (some details hidden, use --verbose to show complete help)
   $ hg help -v topic-containing-verbose
   This is the topic to test omit indicating.
   """"""""""""""""""""""""""""""""""""""""""
   
       This paragraph is never omitted (for topic).
   
       This paragraph is omitted, if 'hg help' is invoked without "-v" (for
       topic)
   
       This paragraph is never omitted, too (for topic)
 
 Test section lookup
 
   $ hg help revset.merge
       "merge()"
         Changeset is a merge changeset.
   
   $ hg help glossary.dag
       DAG
           The repository of changesets of a distributed version control system
           (DVCS) can be described as a directed acyclic graph (DAG), consisting
           of nodes and edges, where nodes correspond to changesets and edges
           imply a parent -> child relation. This graph can be visualized by
           graphical tools such as 'hg log --graph'. In Mercurial, the DAG is
           limited by the requirement for children to have at most two parents.
   
 
   $ hg help hgrc.paths
       "paths"
       -------
   
       Assigns symbolic names and behavior to repositories.
   
       Options are symbolic names defining the URL or directory that is the
       location of the repository. Example:
   
         [paths]
         my_server = https://example.com/my_repo
         local_path = /home/me/repo
   
       These symbolic names can be used from the command line. To pull from
       "my_server": 'hg pull my_server'. To push to "local_path": 'hg push
       local_path'.
   
       Options containing colons (":") denote sub-options that can influence
       behavior for that specific path. Example:
   
         [paths]
         my_server = https://example.com/my_path
         my_server:pushurl = ssh://example.com/my_path
   
       The following sub-options can be defined:
   
       "pushurl"
          The URL to use for push operations. If not defined, the location
          defined by the path's main entry is used.
   
       "pushrev"
          A revset defining which revisions to push by default.
   
          When 'hg push' is executed without a "-r" argument, the revset defined
          by this sub-option is evaluated to determine what to push.
   
          For example, a value of "." will push the working directory's revision
          by default.
   
          Revsets specifying bookmarks will not result in the bookmark being
          pushed.
   
       The following special named paths exist:
   
       "default"
          The URL or directory to use when no source or remote is specified.
   
          'hg clone' will automatically define this path to the location the
          repository was cloned from.
   
       "default-push"
          (deprecated) The URL or directory for the default 'hg push' location.
          "default:pushurl" should be used instead.
   
   $ hg help glossary.mcguffin
   abort: help section not found: glossary.mcguffin
   [10]
 
   $ hg help glossary.mc.guffin
   abort: help section not found: glossary.mc.guffin
   [10]
 
   $ hg help template.files
       files         List of strings. All files modified, added, or removed by
                     this changeset.
       files(pattern)
                     All files of the current changeset matching the pattern. See
                     'hg help patterns'.
 
 Test section lookup by translated message
 
 str.lower() instead of encoding.lower(str) on translated message might
 make message meaningless, because some encoding uses 0x41(A) - 0x5a(Z)
 as the second or later byte of multi-byte character.
 
 For example, "\x8bL\x98^" (translation of "record" in ja_JP.cp932)
 contains 0x4c (L). str.lower() replaces 0x4c(L) by 0x6c(l) and this
 replacement makes message meaningless.
 
 This tests that section lookup by translated string isn't broken by
 such str.lower().
 
   $ "$PYTHON" <<EOF
   > def escape(s):
   >     return b''.join(b'\\u%x' % ord(uc) for uc in s.decode('cp932'))
   > # translation of "record" in ja_JP.cp932
   > upper = b"\x8bL\x98^"
   > # str.lower()-ed section name should be treated as different one
   > lower = b"\x8bl\x98^"
   > with open('ambiguous.py', 'wb') as fp:
   >     fp.write(b"""# ambiguous section names in ja_JP.cp932
   > u'''summary of extension
   > 
   > %s
   > ----
   > 
   > Upper name should show only this message
   > 
   > %s
   > ----
   > 
   > Lower name should show only this message
   > 
   > subsequent section
   > ------------------
   > 
   > This should be hidden at 'hg help ambiguous' with section name.
   > '''
   > """ % (escape(upper), escape(lower)))
   > EOF
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > ambiguous = ./ambiguous.py
   > EOF
 
   $ "$PYTHON" <<EOF | sh
   > from mercurial.utils import procutil
   > upper = b"\x8bL\x98^"
   > procutil.stdout.write(b"hg --encoding cp932 help -e ambiguous.%s\n" % upper)
   > EOF
   \x8bL\x98^ (esc)
   ----
   
   Upper name should show only this message
   
 
   $ "$PYTHON" <<EOF | sh
   > from mercurial.utils import procutil
   > lower = b"\x8bl\x98^"
   > procutil.stdout.write(b"hg --encoding cp932 help -e ambiguous.%s\n" % lower)
   > EOF
   \x8bl\x98^ (esc)
   ----
   
   Lower name should show only this message
   
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > ambiguous = !
   > EOF
 
 Show help content of disabled extensions
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > ambiguous = !./ambiguous.py
   > EOF
   $ hg help -e ambiguous
   ambiguous extension - (no help text available)
   
   (use 'hg help extensions' for information on enabling extensions)
 
 Test dynamic list of merge tools only shows up once
   $ hg help merge-tools
   Merge Tools
   """""""""""
   
       To merge files Mercurial uses merge tools.
   
       A merge tool combines two different versions of a file into a merged file.
       Merge tools are given the two files and the greatest common ancestor of
       the two file versions, so they can determine the changes made on both
       branches.
   
       Merge tools are used both for 'hg resolve', 'hg merge', 'hg update', 'hg
       backout' and in several extensions.
   
       Usually, the merge tool tries to automatically reconcile the files by
       combining all non-overlapping changes that occurred separately in the two
       different evolutions of the same initial base file. Furthermore, some
       interactive merge programs make it easier to manually resolve conflicting
       merges, either in a graphical way, or by inserting some conflict markers.
       Mercurial does not include any interactive merge programs but relies on
       external tools for that.
   
       Available merge tools
       =====================
   
       External merge tools and their properties are configured in the merge-
       tools configuration section - see hgrc(5) - but they can often just be
       named by their executable.
   
       A merge tool is generally usable if its executable can be found on the
       system and if it can handle the merge. The executable is found if it is an
       absolute or relative executable path or the name of an application in the
       executable search path. The tool is assumed to be able to handle the merge
       if it can handle symlinks if the file is a symlink, if it can handle
       binary files if the file is binary, and if a GUI is available if the tool
       requires a GUI.
   
       There are some internal merge tools which can be used. The internal merge
       tools are:
   
       ":dump"
         Creates three versions of the files to merge, containing the contents of
         local, other and base. These files can then be used to perform a merge
         manually. If the file to be merged is named "a.txt", these files will
         accordingly be named "a.txt.local", "a.txt.other" and "a.txt.base" and
         they will be placed in the same directory as "a.txt".
   
         This implies premerge. Therefore, files aren't dumped, if premerge runs
         successfully. Use :forcedump to forcibly write files out.
   
         (actual capabilities: binary, symlink)
   
       ":fail"
         Rather than attempting to merge files that were modified on both
         branches, it marks them as unresolved. The resolve command must be used
         to resolve these conflicts.
   
         (actual capabilities: binary, symlink)
   
       ":forcedump"
         Creates three versions of the files as same as :dump, but omits
         premerge.
   
         (actual capabilities: binary, symlink)
   
       ":local"
         Uses the local 'p1()' version of files as the merged version.
   
         (actual capabilities: binary, symlink)
   
       ":merge"
         Uses the internal non-interactive simple merge algorithm for merging
         files. It will fail if there are any conflicts and leave markers in the
         partially merged file. Markers will have two sections, one for each side
         of merge.
   
       ":merge-local"
         Like :merge, but resolve all conflicts non-interactively in favor of the
         local 'p1()' changes.
   
       ":merge-other"
         Like :merge, but resolve all conflicts non-interactively in favor of the
         other 'p2()' changes.
   
       ":merge3"
         Uses the internal non-interactive simple merge algorithm for merging
         files. It will fail if there are any conflicts and leave markers in the
         partially merged file. Marker will have three sections, one from each
         side of the merge and one for the base content.
   
       ":mergediff"
         Uses the internal non-interactive simple merge algorithm for merging
         files. It will fail if there are any conflicts and leave markers in the
         partially merged file. The marker will have two sections, one with the
         content from one side of the merge, and one with a diff from the base
         content to the content on the other side. (experimental)
   
       ":other"
         Uses the other 'p2()' version of files as the merged version.
   
         (actual capabilities: binary, symlink)
   
       ":prompt"
         Asks the user which of the local 'p1()' or the other 'p2()' version to
         keep as the merged version.
   
         (actual capabilities: binary, symlink)
   
       ":tagmerge"
         Uses the internal tag merge algorithm (experimental).
   
       ":union"
         Uses the internal non-interactive simple merge algorithm for merging
         files. It will use both left and right sides for conflict regions. No
         markers are inserted.
   
       Internal tools are always available and do not require a GUI but will by
       default not handle symlinks or binary files. See next section for detail
       about "actual capabilities" described above.
   
       Choosing a merge tool
       =====================
   
       Mercurial uses these rules when deciding which merge tool to use:
   
       1. If a tool has been specified with the --tool option to merge or
          resolve, it is used.  If it is the name of a tool in the merge-tools
          configuration, its configuration is used. Otherwise the specified tool
          must be executable by the shell.
       2. If the "HGMERGE" environment variable is present, its value is used and
          must be executable by the shell.
       3. If the filename of the file to be merged matches any of the patterns in
          the merge-patterns configuration section, the first usable merge tool
          corresponding to a matching pattern is used.
       4. If ui.merge is set it will be considered next. If the value is not the
          name of a configured tool, the specified value is used and must be
          executable by the shell. Otherwise the named tool is used if it is
          usable.
       5. If any usable merge tools are present in the merge-tools configuration
          section, the one with the highest priority is used.
       6. If a program named "hgmerge" can be found on the system, it is used -
          but it will by default not be used for symlinks and binary files.
       7. If the file to be merged is not binary and is not a symlink, then
          internal ":merge" is used.
       8. Otherwise, ":prompt" is used.
   
       For historical reason, Mercurial treats merge tools as below while
       examining rules above.
   
       step specified via  binary symlink
       ----------------------------------
       1.   --tool         o/o    o/o
       2.   HGMERGE        o/o    o/o
       3.   merge-patterns o/o(*) x/?(*)
       4.   ui.merge       x/?(*) x/?(*)
   
       Each capability column indicates Mercurial behavior for internal/external
       merge tools at examining each rule.
   
       - "o": "assume that a tool has capability"
       - "x": "assume that a tool does not have capability"
       - "?": "check actual capability of a tool"
   
       If "merge.strict-capability-check" configuration is true, Mercurial checks
       capabilities of merge tools strictly in (*) cases above (= each capability
       column becomes "?/?"). It is false by default for backward compatibility.
   
       Note:
          After selecting a merge program, Mercurial will by default attempt to
          merge the files using a simple merge algorithm first. Only if it
          doesn't succeed because of conflicting changes will Mercurial actually
          execute the merge program. Whether to use the simple merge algorithm
          first can be controlled by the premerge setting of the merge tool.
          Premerge is enabled by default unless the file is binary or a symlink.
   
       See the merge-tools and ui sections of hgrc(5) for details on the
       configuration of merge tools.
 
 Compression engines listed in `hg help bundlespec`
 
   $ hg help bundlespec | grep gzip
           "v1" bundles can only use the "gzip", "bzip2", and "none" compression
         An algorithm that produces smaller bundles than "gzip".
         This engine will likely produce smaller bundles than "gzip" but will be
       "gzip"
         better compression than "gzip". It also frequently yields better (?)
 
 Test usage of section marks in help documents
 
   $ cd "$TESTDIR"/../doc
   $ "$PYTHON" check-seclevel.py
   $ cd $TESTTMP
 
 #if serve
 
 Test the help pages in hgweb.
 
 Dish up an empty repo; serve it cold.
 
   $ hg init "$TESTTMP/test"
   $ hg serve -R "$TESTTMP/test" -n test -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: Index</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
   <li class="active">help</li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <table class="bigtable">
   <tr><td colspan="2"><h2><a name="topics" href="#topics">Topics</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/bundlespec">
   bundlespec
   </a>
   </td><td>
   Bundle File Formats
   </td></tr>
   <tr><td>
   <a href="/help/color">
   color
   </a>
   </td><td>
   Colorizing Outputs
   </td></tr>
   <tr><td>
   <a href="/help/config">
   config
   </a>
   </td><td>
   Configuration Files
   </td></tr>
   <tr><td>
   <a href="/help/dates">
   dates
   </a>
   </td><td>
   Date Formats
   </td></tr>
   <tr><td>
   <a href="/help/deprecated">
   deprecated
   </a>
   </td><td>
   Deprecated Features
   </td></tr>
   <tr><td>
   <a href="/help/diffs">
   diffs
   </a>
   </td><td>
   Diff Formats
   </td></tr>
   <tr><td>
   <a href="/help/environment">
   environment
   </a>
   </td><td>
   Environment Variables
   </td></tr>
   <tr><td>
   <a href="/help/extensions">
   extensions
   </a>
   </td><td>
   Using Additional Features
   </td></tr>
   <tr><td>
   <a href="/help/filesets">
   filesets
   </a>
   </td><td>
   Specifying File Sets
   </td></tr>
   <tr><td>
   <a href="/help/flags">
   flags
   </a>
   </td><td>
   Command-line flags
   </td></tr>
   <tr><td>
   <a href="/help/glossary">
   glossary
   </a>
   </td><td>
   Glossary
   </td></tr>
   <tr><td>
   <a href="/help/hgignore">
   hgignore
   </a>
   </td><td>
   Syntax for Mercurial Ignore Files
   </td></tr>
   <tr><td>
   <a href="/help/hgweb">
   hgweb
   </a>
   </td><td>
   Configuring hgweb
   </td></tr>
   <tr><td>
   <a href="/help/internals">
   internals
   </a>
   </td><td>
   Technical implementation topics
   </td></tr>
   <tr><td>
   <a href="/help/merge-tools">
   merge-tools
   </a>
   </td><td>
   Merge Tools
   </td></tr>
   <tr><td>
   <a href="/help/pager">
   pager
   </a>
   </td><td>
   Pager Support
   </td></tr>
   <tr><td>
   <a href="/help/patterns">
   patterns
   </a>
   </td><td>
   File Name Patterns
   </td></tr>
   <tr><td>
   <a href="/help/phases">
   phases
   </a>
   </td><td>
   Working with Phases
   </td></tr>
   <tr><td>
   <a href="/help/revisions">
   revisions
   </a>
   </td><td>
   Specifying Revisions
   </td></tr>
   <tr><td>
   <a href="/help/scripting">
   scripting
   </a>
   </td><td>
   Using Mercurial from scripts and automation
   </td></tr>
   <tr><td>
   <a href="/help/subrepos">
   subrepos
   </a>
   </td><td>
   Subrepositories
   </td></tr>
   <tr><td>
   <a href="/help/templating">
   templating
   </a>
   </td><td>
   Template Usage
   </td></tr>
   <tr><td>
   <a href="/help/urls">
   urls
   </a>
   </td><td>
   URL Paths
   </td></tr>
   <tr><td>
   <a href="/help/topic-containing-verbose">
   topic-containing-verbose
   </a>
   </td><td>
   This is the topic to test omit indicating.
   </td></tr>
   
   
   <tr><td colspan="2"><h2><a name="main" href="#main">Main Commands</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/abort">
   abort
   </a>
   </td><td>
   abort an unfinished operation (EXPERIMENTAL)
   </td></tr>
   <tr><td>
   <a href="/help/add">
   add
   </a>
   </td><td>
   add the specified files on the next commit
   </td></tr>
   <tr><td>
   <a href="/help/annotate">
   annotate
   </a>
   </td><td>
   show changeset information by line for each file
   </td></tr>
   <tr><td>
   <a href="/help/clone">
   clone
   </a>
   </td><td>
   make a copy of an existing repository
   </td></tr>
   <tr><td>
   <a href="/help/commit">
   commit
   </a>
   </td><td>
   commit the specified files or all outstanding changes
   </td></tr>
   <tr><td>
   <a href="/help/continue">
   continue
   </a>
   </td><td>
   resumes an interrupted operation (EXPERIMENTAL)
   </td></tr>
   <tr><td>
   <a href="/help/diff">
   diff
   </a>
   </td><td>
   diff repository (or selected files)
   </td></tr>
   <tr><td>
   <a href="/help/export">
   export
   </a>
   </td><td>
   dump the header and diffs for one or more changesets
   </td></tr>
   <tr><td>
   <a href="/help/forget">
   forget
   </a>
   </td><td>
   forget the specified files on the next commit
   </td></tr>
   <tr><td>
   <a href="/help/init">
   init
   </a>
   </td><td>
   create a new repository in the given directory
   </td></tr>
   <tr><td>
   <a href="/help/log">
   log
   </a>
   </td><td>
   show revision history of entire repository or files
   </td></tr>
   <tr><td>
   <a href="/help/merge">
   merge
   </a>
   </td><td>
   merge another revision into working directory
   </td></tr>
   <tr><td>
   <a href="/help/pull">
   pull
   </a>
   </td><td>
   pull changes from the specified source
   </td></tr>
   <tr><td>
   <a href="/help/push">
   push
   </a>
   </td><td>
   push changes to the specified destination
   </td></tr>
   <tr><td>
   <a href="/help/remove">
   remove
   </a>
   </td><td>
   remove the specified files on the next commit
   </td></tr>
   <tr><td>
   <a href="/help/serve">
   serve
   </a>
   </td><td>
   start stand-alone webserver
   </td></tr>
   <tr><td>
   <a href="/help/status">
   status
   </a>
   </td><td>
   show changed files in the working directory
   </td></tr>
   <tr><td>
   <a href="/help/summary">
   summary
   </a>
   </td><td>
   summarize working directory state
   </td></tr>
   <tr><td>
   <a href="/help/update">
   update
   </a>
   </td><td>
   update working directory (or switch revisions)
   </td></tr>
   
   
   
   <tr><td colspan="2"><h2><a name="other" href="#other">Other Commands</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/addremove">
   addremove
   </a>
   </td><td>
   add all new files, delete all missing files
   </td></tr>
   <tr><td>
   <a href="/help/archive">
   archive
   </a>
   </td><td>
   create an unversioned archive of a repository revision
   </td></tr>
   <tr><td>
   <a href="/help/backout">
   backout
   </a>
   </td><td>
   reverse effect of earlier changeset
   </td></tr>
   <tr><td>
   <a href="/help/bisect">
   bisect
   </a>
   </td><td>
   subdivision search of changesets
   </td></tr>
   <tr><td>
   <a href="/help/bookmarks">
   bookmarks
   </a>
   </td><td>
   create a new bookmark or list existing bookmarks
   </td></tr>
   <tr><td>
   <a href="/help/branch">
   branch
   </a>
   </td><td>
   set or show the current branch name
   </td></tr>
   <tr><td>
   <a href="/help/branches">
   branches
   </a>
   </td><td>
   list repository named branches
   </td></tr>
   <tr><td>
   <a href="/help/bundle">
   bundle
   </a>
   </td><td>
   create a bundle file
   </td></tr>
   <tr><td>
   <a href="/help/cat">
   cat
   </a>
   </td><td>
   output the current or given revision of files
   </td></tr>
   <tr><td>
   <a href="/help/config">
   config
   </a>
   </td><td>
   show combined config settings from all hgrc files
   </td></tr>
   <tr><td>
   <a href="/help/copy">
   copy
   </a>
   </td><td>
   mark files as copied for the next commit
   </td></tr>
   <tr><td>
   <a href="/help/files">
   files
   </a>
   </td><td>
   list tracked files
   </td></tr>
   <tr><td>
   <a href="/help/graft">
   graft
   </a>
   </td><td>
   copy changes from other branches onto the current branch
   </td></tr>
   <tr><td>
   <a href="/help/grep">
   grep
   </a>
   </td><td>
   search for a pattern in specified files
   </td></tr>
   <tr><td>
   <a href="/help/hashelp">
   hashelp
   </a>
   </td><td>
   Extension command's help
   </td></tr>
   <tr><td>
   <a href="/help/heads">
   heads
   </a>
   </td><td>
   show branch heads
   </td></tr>
   <tr><td>
   <a href="/help/help">
   help
   </a>
   </td><td>
   show help for a given topic or a help overview
   </td></tr>
   <tr><td>
   <a href="/help/hgalias">
   hgalias
   </a>
   </td><td>
   My doc
   </td></tr>
   <tr><td>
   <a href="/help/hgaliasnodoc">
   hgaliasnodoc
   </a>
   </td><td>
   summarize working directory state
   </td></tr>
   <tr><td>
   <a href="/help/identify">
   identify
   </a>
   </td><td>
   identify the working directory or specified revision
   </td></tr>
   <tr><td>
   <a href="/help/import">
   import
   </a>
   </td><td>
   import an ordered set of patches
   </td></tr>
   <tr><td>
   <a href="/help/incoming">
   incoming
   </a>
   </td><td>
   show new changesets found in source
   </td></tr>
   <tr><td>
   <a href="/help/manifest">
   manifest
   </a>
   </td><td>
   output the current or given revision of the project manifest
   </td></tr>
   <tr><td>
   <a href="/help/nohelp">
   nohelp
   </a>
   </td><td>
   (no help text available)
   </td></tr>
   <tr><td>
   <a href="/help/outgoing">
   outgoing
   </a>
   </td><td>
   show changesets not found in the destination
   </td></tr>
   <tr><td>
   <a href="/help/paths">
   paths
   </a>
   </td><td>
   show aliases for remote repositories
   </td></tr>
   <tr><td>
   <a href="/help/phase">
   phase
   </a>
   </td><td>
   set or show the current phase name
   </td></tr>
   <tr><td>
   <a href="/help/recover">
   recover
   </a>
   </td><td>
   roll back an interrupted transaction
   </td></tr>
   <tr><td>
   <a href="/help/rename">
   rename
   </a>
   </td><td>
   rename files; equivalent of copy + remove
   </td></tr>
   <tr><td>
   <a href="/help/resolve">
   resolve
   </a>
   </td><td>
   redo merges or set/view the merge status of files
   </td></tr>
   <tr><td>
   <a href="/help/revert">
   revert
   </a>
   </td><td>
   restore files to their checkout state
   </td></tr>
   <tr><td>
   <a href="/help/root">
   root
   </a>
   </td><td>
   print the root (top) of the current working directory
   </td></tr>
   <tr><td>
   <a href="/help/shellalias">
   shellalias
   </a>
   </td><td>
   (no help text available)
   </td></tr>
   <tr><td>
   <a href="/help/shelve">
   shelve
   </a>
   </td><td>
   save and set aside changes from the working directory
   </td></tr>
   <tr><td>
   <a href="/help/tag">
   tag
   </a>
   </td><td>
   add one or more tags for the current or given revision
   </td></tr>
   <tr><td>
   <a href="/help/tags">
   tags
   </a>
   </td><td>
   list repository tags
   </td></tr>
   <tr><td>
   <a href="/help/unbundle">
   unbundle
   </a>
   </td><td>
   apply one or more bundle files
   </td></tr>
   <tr><td>
   <a href="/help/unshelve">
   unshelve
   </a>
   </td><td>
   restore a shelved change to the working directory
   </td></tr>
   <tr><td>
   <a href="/help/verify">
   verify
   </a>
   </td><td>
   verify the integrity of the repository
   </td></tr>
   <tr><td>
   <a href="/help/version">
   version
   </a>
   </td><td>
   output version and copyright information
   </td></tr>
   
   
   </table>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/add"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: add</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: add</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <p>
   hg add [OPTION]... [FILE]...
   </p>
   <p>
   add the specified files on the next commit
   </p>
   <p>
   Schedule files to be version controlled and added to the
   repository.
   </p>
   <p>
   The files will be added to the repository at the next commit. To
   undo an add before that, see 'hg forget'.
   </p>
   <p>
   If no names are given, add all files to the repository (except
   files matching &quot;.hgignore&quot;).
   </p>
   <p>
   Examples:
   </p>
   <ul>
    <li> New (unknown) files are added   automatically by 'hg add':
   <pre>
   \$ ls (re)
   foo.c
   \$ hg status (re)
   ? foo.c
   \$ hg add (re)
   adding foo.c
   \$ hg status (re)
   A foo.c
   </pre>
    <li> Specific files to be added can be specified:
   <pre>
   \$ ls (re)
   bar.c  foo.c
   \$ hg status (re)
   ? bar.c
   ? foo.c
   \$ hg add bar.c (re)
   \$ hg status (re)
   A bar.c
   ? foo.c
   </pre>
   </ul>
   <p>
   Returns 0 if all files are successfully added.
   </p>
   <p>
   options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-I</td>
   <td>--include PATTERN [+]</td>
   <td>include names matching the given patterns</td></tr>
   <tr><td>-X</td>
   <td>--exclude PATTERN [+]</td>
   <td>exclude names matching the given patterns</td></tr>
   <tr><td>-S</td>
   <td>--subrepos</td>
   <td>recurse into subrepositories</td></tr>
   <tr><td>-n</td>
   <td>--dry-run</td>
   <td>do not perform actions, just print output</td></tr>
   </table>
   <p>
   global options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-R</td>
   <td>--repository REPO</td>
   <td>repository root directory or name of overlay bundle file</td></tr>
   <tr><td></td>
   <td>--cwd DIR</td>
   <td>change working directory</td></tr>
   <tr><td>-y</td>
   <td>--noninteractive</td>
   <td>do not prompt, automatically pick the first choice for all prompts</td></tr>
   <tr><td>-q</td>
   <td>--quiet</td>
   <td>suppress output</td></tr>
   <tr><td>-v</td>
   <td>--verbose</td>
   <td>enable additional output</td></tr>
   <tr><td></td>
   <td>--color TYPE</td>
   <td>when to colorize (boolean, always, auto, never, or debug)</td></tr>
   <tr><td></td>
   <td>--config CONFIG [+]</td>
   <td>set/override config option (use 'section.name=value')</td></tr>
   <tr><td></td>
   <td>--debug</td>
   <td>enable debugging output</td></tr>
   <tr><td></td>
   <td>--debugger</td>
   <td>start debugger</td></tr>
   <tr><td></td>
   <td>--encoding ENCODE</td>
   <td>set the charset encoding (default: ascii)</td></tr>
   <tr><td></td>
   <td>--encodingmode MODE</td>
   <td>set the charset encoding mode (default: strict)</td></tr>
   <tr><td></td>
   <td>--traceback</td>
   <td>always print a traceback on exception</td></tr>
   <tr><td></td>
   <td>--time</td>
   <td>time how long the command takes</td></tr>
   <tr><td></td>
   <td>--profile</td>
   <td>print command execution profile</td></tr>
   <tr><td></td>
   <td>--version</td>
   <td>output version information and exit</td></tr>
   <tr><td>-h</td>
   <td>--help</td>
   <td>display help and exit</td></tr>
   <tr><td></td>
   <td>--hidden</td>
   <td>consider hidden changesets</td></tr>
   <tr><td></td>
   <td>--pager TYPE</td>
   <td>when to paginate (boolean, always, auto, or never) (default: auto)</td></tr>
   </table>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/remove"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: remove</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: remove</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <p>
   hg remove [OPTION]... FILE...
   </p>
   <p>
   aliases: rm
   </p>
   <p>
   remove the specified files on the next commit
   </p>
   <p>
   Schedule the indicated files for removal from the current branch.
   </p>
   <p>
   This command schedules the files to be removed at the next commit.
   To undo a remove before that, see 'hg revert'. To undo added
   files, see 'hg forget'.
   </p>
   <p>
   -A/--after can be used to remove only files that have already
   been deleted, -f/--force can be used to force deletion, and -Af
   can be used to remove files from the next revision without
   deleting them from the working directory.
   </p>
   <p>
   The following table details the behavior of remove for different
   file states (columns) and option combinations (rows). The file
   states are Added [A], Clean [C], Modified [M] and Missing [!]
   (as reported by 'hg status'). The actions are Warn, Remove
   (from branch) and Delete (from disk):
   </p>
   <table>
   <tr><td>opt/state</td>
   <td>A</td>
   <td>C</td>
   <td>M</td>
   <td>!</td></tr>
   <tr><td>none</td>
   <td>W</td>
   <td>RD</td>
   <td>W</td>
   <td>R</td></tr>
   <tr><td>-f</td>
   <td>R</td>
   <td>RD</td>
   <td>RD</td>
   <td>R</td></tr>
   <tr><td>-A</td>
   <td>W</td>
   <td>W</td>
   <td>W</td>
   <td>R</td></tr>
   <tr><td>-Af</td>
   <td>R</td>
   <td>R</td>
   <td>R</td>
   <td>R</td></tr>
   </table>
   <p>
   <b>Note:</b> 
   </p>
   <p>
   'hg remove' never deletes files in Added [A] state from the
   working directory, not even if &quot;--force&quot; is specified.
   </p>
   <p>
   Returns 0 on success, 1 if any warnings encountered.
   </p>
   <p>
   options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-A</td>
   <td>--after</td>
   <td>record delete for missing files</td></tr>
   <tr><td>-f</td>
   <td>--force</td>
   <td>forget added files, delete modified files</td></tr>
   <tr><td>-S</td>
   <td>--subrepos</td>
   <td>recurse into subrepositories</td></tr>
   <tr><td>-I</td>
   <td>--include PATTERN [+]</td>
   <td>include names matching the given patterns</td></tr>
   <tr><td>-X</td>
   <td>--exclude PATTERN [+]</td>
   <td>exclude names matching the given patterns</td></tr>
   <tr><td>-n</td>
   <td>--dry-run</td>
   <td>do not perform actions, just print output</td></tr>
   </table>
   <p>
   global options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-R</td>
   <td>--repository REPO</td>
   <td>repository root directory or name of overlay bundle file</td></tr>
   <tr><td></td>
   <td>--cwd DIR</td>
   <td>change working directory</td></tr>
   <tr><td>-y</td>
   <td>--noninteractive</td>
   <td>do not prompt, automatically pick the first choice for all prompts</td></tr>
   <tr><td>-q</td>
   <td>--quiet</td>
   <td>suppress output</td></tr>
   <tr><td>-v</td>
   <td>--verbose</td>
   <td>enable additional output</td></tr>
   <tr><td></td>
   <td>--color TYPE</td>
   <td>when to colorize (boolean, always, auto, never, or debug)</td></tr>
   <tr><td></td>
   <td>--config CONFIG [+]</td>
   <td>set/override config option (use 'section.name=value')</td></tr>
   <tr><td></td>
   <td>--debug</td>
   <td>enable debugging output</td></tr>
   <tr><td></td>
   <td>--debugger</td>
   <td>start debugger</td></tr>
   <tr><td></td>
   <td>--encoding ENCODE</td>
   <td>set the charset encoding (default: ascii)</td></tr>
   <tr><td></td>
   <td>--encodingmode MODE</td>
   <td>set the charset encoding mode (default: strict)</td></tr>
   <tr><td></td>
   <td>--traceback</td>
   <td>always print a traceback on exception</td></tr>
   <tr><td></td>
   <td>--time</td>
   <td>time how long the command takes</td></tr>
   <tr><td></td>
   <td>--profile</td>
   <td>print command execution profile</td></tr>
   <tr><td></td>
   <td>--version</td>
   <td>output version information and exit</td></tr>
   <tr><td>-h</td>
   <td>--help</td>
   <td>display help and exit</td></tr>
   <tr><td></td>
   <td>--hidden</td>
   <td>consider hidden changesets</td></tr>
   <tr><td></td>
   <td>--pager TYPE</td>
   <td>when to paginate (boolean, always, auto, or never) (default: auto)</td></tr>
   </table>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/dates"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: dates</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: dates</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <h1>Date Formats</h1>
   <p>
   Some commands allow the user to specify a date, e.g.:
   </p>
   <ul>
    <li> backout, commit, import, tag: Specify the commit date.
    <li> log, revert, update: Select revision(s) by date.
   </ul>
   <p>
   Many date formats are valid. Here are some examples:
   </p>
   <ul>
    <li> &quot;Wed Dec 6 13:18:29 2006&quot; (local timezone assumed)
    <li> &quot;Dec 6 13:18 -0600&quot; (year assumed, time offset provided)
    <li> &quot;Dec 6 13:18 UTC&quot; (UTC and GMT are aliases for +0000)
    <li> &quot;Dec 6&quot; (midnight)
    <li> &quot;13:18&quot; (today assumed)
    <li> &quot;3:39&quot; (3:39AM assumed)
    <li> &quot;3:39pm&quot; (15:39)
    <li> &quot;2006-12-06 13:18:29&quot; (ISO 8601 format)
    <li> &quot;2006-12-6 13:18&quot;
    <li> &quot;2006-12-6&quot;
    <li> &quot;12-6&quot;
    <li> &quot;12/6&quot;
    <li> &quot;12/6/6&quot; (Dec 6 2006)
    <li> &quot;today&quot; (midnight)
    <li> &quot;yesterday&quot; (midnight)
    <li> &quot;now&quot; - right now
   </ul>
   <p>
   Lastly, there is Mercurial's internal format:
   </p>
   <ul>
    <li> &quot;1165411109 0&quot; (Wed Dec 6 13:18:29 2006 UTC)
   </ul>
   <p>
   This is the internal representation format for dates. The first number
   is the number of seconds since the epoch (1970-01-01 00:00 UTC). The
   second is the offset of the local timezone, in seconds west of UTC
   (negative if the timezone is east of UTC).
   </p>
   <p>
   The log command also accepts date ranges:
   </p>
   <ul>
    <li> &quot;&lt;DATE&quot; - at or before a given date/time
    <li> &quot;&gt;DATE&quot; - on or after a given date/time
    <li> &quot;DATE to DATE&quot; - a date range, inclusive
    <li> &quot;-DAYS&quot; - within a given number of days from today
   </ul>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/pager"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: pager</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: pager</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <h1>Pager Support</h1>
   <p>
   Some Mercurial commands can produce a lot of output, and Mercurial will
   attempt to use a pager to make those commands more pleasant.
   </p>
   <p>
   To set the pager that should be used, set the application variable:
   </p>
   <pre>
   [pager]
   pager = less -FRX
   </pre>
   <p>
   If no pager is set in the user or repository configuration, Mercurial uses the
   environment variable $PAGER. If $PAGER is not set, pager.pager from the default
   or system configuration is used. If none of these are set, a default pager will
   be used, typically 'less' on Unix and 'more' on Windows.
   </p>
   <p>
   You can disable the pager for certain commands by adding them to the
   pager.ignore list:
   </p>
   <pre>
   [pager]
   ignore = version, help, update
   </pre>
   <p>
   To ignore global commands like 'hg version' or 'hg help', you have
   to specify them in your user configuration file.
   </p>
   <p>
   To control whether the pager is used at all for an individual command,
   you can use --pager=&lt;value&gt;:
   </p>
   <ul>
    <li> use as needed: 'auto'.
    <li> require the pager: 'yes' or 'on'.
    <li> suppress the pager: 'no' or 'off' (any unrecognized value   will also work).
   </ul>
   <p>
   To globally turn off all attempts to use a pager, set:
   </p>
   <pre>
   [ui]
   paginate = never
   </pre>
   <p>
   which will prevent the pager from running.
   </p>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
 Sub-topic indexes rendered properly
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/internals"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: internals</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
   <li><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <table class="bigtable">
   <tr><td colspan="2"><h2><a name="topics" href="#topics">Topics</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/internals.bid-merge">
   bid-merge
   </a>
   </td><td>
   Bid Merge Algorithm
   </td></tr>
   <tr><td>
   <a href="/help/internals.bundle2">
   bundle2
   </a>
   </td><td>
   Bundle2
   </td></tr>
   <tr><td>
   <a href="/help/internals.bundles">
   bundles
   </a>
   </td><td>
   Bundles
   </td></tr>
   <tr><td>
   <a href="/help/internals.cbor">
   cbor
   </a>
   </td><td>
   CBOR
   </td></tr>
   <tr><td>
   <a href="/help/internals.censor">
   censor
   </a>
   </td><td>
   Censor
   </td></tr>
   <tr><td>
   <a href="/help/internals.changegroups">
   changegroups
   </a>
   </td><td>
   Changegroups
   </td></tr>
   <tr><td>
   <a href="/help/internals.config">
   config
   </a>
   </td><td>
   Config Registrar
   </td></tr>
   <tr><td>
   <a href="/help/internals.extensions">
   extensions
   </a>
   </td><td>
   Extension API
   </td></tr>
   <tr><td>
   <a href="/help/internals.mergestate">
   mergestate
   </a>
   </td><td>
   Mergestate
   </td></tr>
   <tr><td>
   <a href="/help/internals.requirements">
   requirements
   </a>
   </td><td>
   Repository Requirements
   </td></tr>
   <tr><td>
   <a href="/help/internals.revlogs">
   revlogs
   </a>
   </td><td>
   Revision Logs
   </td></tr>
   <tr><td>
   <a href="/help/internals.wireprotocol">
   wireprotocol
   </a>
   </td><td>
   Wire Protocol
   </td></tr>
   <tr><td>
   <a href="/help/internals.wireprotocolrpc">
   wireprotocolrpc
   </a>
   </td><td>
   Wire Protocol RPC
   </td></tr>
   <tr><td>
   <a href="/help/internals.wireprotocolv2">
   wireprotocolv2
   </a>
   </td><td>
   Wire Protocol Version 2
   </td></tr>
   
   
   
   
   
   </table>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
 Sub-topic topics rendered properly
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/internals.changegroups"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: internals.changegroups</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: internals.changegroups</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <h1>Changegroups</h1>
   <p>
   Changegroups are representations of repository revlog data, specifically
   the changelog data, root/flat manifest data, treemanifest data, and
   filelogs.
   </p>
   <p>
   There are 3 versions of changegroups: &quot;1&quot;, &quot;2&quot;, and &quot;3&quot;. From a
   high-level, versions &quot;1&quot; and &quot;2&quot; are almost exactly the same, with the
   only difference being an additional item in the *delta header*. Version
   &quot;3&quot; adds support for storage flags in the *delta header* and optionally
   exchanging treemanifests (enabled by setting an option on the
   &quot;changegroup&quot; part in the bundle2).
   </p>
   <p>
   Changegroups when not exchanging treemanifests consist of 3 logical
   segments:
   </p>
   <pre>
   +---------------------------------+
   |           |          |          |
   | changeset | manifest | filelogs |
   |           |          |          |
   |           |          |          |
   +---------------------------------+
   </pre>
   <p>
   When exchanging treemanifests, there are 4 logical segments:
   </p>
   <pre>
   +-------------------------------------------------+
   |           |          |               |          |
   | changeset |   root   | treemanifests | filelogs |
   |           | manifest |               |          |
   |           |          |               |          |
   +-------------------------------------------------+
   </pre>
   <p>
   The principle building block of each segment is a *chunk*. A *chunk*
   is a framed piece of data:
   </p>
   <pre>
   +---------------------------------------+
   |           |                           |
   |  length   |           data            |
   | (4 bytes) |   (&lt;length - 4&gt; bytes)    |
   |           |                           |
   +---------------------------------------+
   </pre>
   <p>
   All integers are big-endian signed integers. Each chunk starts with a 32-bit
   integer indicating the length of the entire chunk (including the length field
   itself).
   </p>
   <p>
   There is a special case chunk that has a value of 0 for the length
   (&quot;0x00000000&quot;). We call this an *empty chunk*.
   </p>
   <h2>Delta Groups</h2>
   <p>
   A *delta group* expresses the content of a revlog as a series of deltas,
   or patches against previous revisions.
   </p>
   <p>
   Delta groups consist of 0 or more *chunks* followed by the *empty chunk*
   to signal the end of the delta group:
   </p>
   <pre>
   +------------------------------------------------------------------------+
   |                |             |               |             |           |
   | chunk0 length  | chunk0 data | chunk1 length | chunk1 data |    0x0    |
   |   (4 bytes)    |  (various)  |   (4 bytes)   |  (various)  | (4 bytes) |
   |                |             |               |             |           |
   +------------------------------------------------------------------------+
   </pre>
   <p>
   Each *chunk*'s data consists of the following:
   </p>
   <pre>
   +---------------------------------------+
   |                        |              |
   |     delta header       |  delta data  |
   |  (various by version)  |  (various)   |
   |                        |              |
   +---------------------------------------+
   </pre>
   <p>
   The *delta data* is a series of *delta*s that describe a diff from an existing
   entry (either that the recipient already has, or previously specified in the
   bundle/changegroup).
   </p>
   <p>
   The *delta header* is different between versions &quot;1&quot;, &quot;2&quot;, and
   &quot;3&quot; of the changegroup format.
   </p>
   <p>
   Version 1 (headerlen=80):
   </p>
   <pre>
   +------------------------------------------------------+
   |            |             |             |             |
   |    node    |   p1 node   |   p2 node   |  link node  |
   | (20 bytes) |  (20 bytes) |  (20 bytes) |  (20 bytes) |
   |            |             |             |             |
   +------------------------------------------------------+
   </pre>
   <p>
   Version 2 (headerlen=100):
   </p>
   <pre>
   +------------------------------------------------------------------+
   |            |             |             |            |            |
   |    node    |   p1 node   |   p2 node   | base node  | link node  |
   | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) |
   |            |             |             |            |            |
   +------------------------------------------------------------------+
   </pre>
   <p>
   Version 3 (headerlen=102):
   </p>
   <pre>
   +------------------------------------------------------------------------------+
   |            |             |             |            |            |           |
   |    node    |   p1 node   |   p2 node   | base node  | link node  |   flags   |
   | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) | (2 bytes) |
   |            |             |             |            |            |           |
   +------------------------------------------------------------------------------+
   </pre>
   <p>
   The *delta data* consists of &quot;chunklen - 4 - headerlen&quot; bytes, which contain a
   series of *delta*s, densely packed (no separators). These deltas describe a diff
   from an existing entry (either that the recipient already has, or previously
   specified in the bundle/changegroup). The format is described more fully in
   &quot;hg help internals.bdiff&quot;, but briefly:
   </p>
   <pre>
   +---------------------------------------------------------------+
   |              |            |            |                      |
   | start offset | end offset | new length |        content       |
   |  (4 bytes)   |  (4 bytes) |  (4 bytes) | (&lt;new length&gt; bytes) |
   |              |            |            |                      |
   +---------------------------------------------------------------+
   </pre>
   <p>
   Please note that the length field in the delta data does *not* include itself.
   </p>
   <p>
   In version 1, the delta is always applied against the previous node from
   the changegroup or the first parent if this is the first entry in the
   changegroup.
   </p>
   <p>
   In version 2 and up, the delta base node is encoded in the entry in the
   changegroup. This allows the delta to be expressed against any parent,
   which can result in smaller deltas and more efficient encoding of data.
   </p>
   <p>
   The *flags* field holds bitwise flags affecting the processing of revision
   data. The following flags are defined:
   </p>
   <dl>
    <dt>32768
    <dd>Censored revision. The revision's fulltext has been replaced by censor metadata. May only occur on file revisions.
    <dt>16384
    <dd>Ellipsis revision. Revision hash does not match data (likely due to rewritten parents).
    <dt>8192
    <dd>Externally stored. The revision fulltext contains &quot;key:value&quot; &quot;\n&quot; delimited metadata defining an object stored elsewhere. Used by the LFS extension.
   </dl>
   <p>
   For historical reasons, the integer values are identical to revlog version 1
   per-revision storage flags and correspond to bits being set in this 2-byte
   field. Bits were allocated starting from the most-significant bit, hence the
   reverse ordering and allocation of these flags.
   </p>
   <h2>Changeset Segment</h2>
   <p>
   The *changeset segment* consists of a single *delta group* holding
   changelog data. The *empty chunk* at the end of the *delta group* denotes
   the boundary to the *manifest segment*.
   </p>
   <h2>Manifest Segment</h2>
   <p>
   The *manifest segment* consists of a single *delta group* holding manifest
   data. If treemanifests are in use, it contains only the manifest for the
   root directory of the repository. Otherwise, it contains the entire
   manifest data. The *empty chunk* at the end of the *delta group* denotes
   the boundary to the next segment (either the *treemanifests segment* or the
   *filelogs segment*, depending on version and the request options).
   </p>
   <h3>Treemanifests Segment</h3>
   <p>
   The *treemanifests segment* only exists in changegroup version &quot;3&quot;, and
   only if the 'treemanifest' param is part of the bundle2 changegroup part
   (it is not possible to use changegroup version 3 outside of bundle2).
   Aside from the filenames in the *treemanifests segment* containing a
   trailing &quot;/&quot; character, it behaves identically to the *filelogs segment*
   (see below). The final sub-segment is followed by an *empty chunk* (logically,
   a sub-segment with filename size 0). This denotes the boundary to the
   *filelogs segment*.
   </p>
   <h2>Filelogs Segment</h2>
   <p>
   The *filelogs segment* consists of multiple sub-segments, each
   corresponding to an individual file whose data is being described:
   </p>
   <pre>
   +--------------------------------------------------+
   |          |          |          |     |           |
   | filelog0 | filelog1 | filelog2 | ... |    0x0    |
   |          |          |          |     | (4 bytes) |
   |          |          |          |     |           |
   +--------------------------------------------------+
   </pre>
   <p>
   The final filelog sub-segment is followed by an *empty chunk* (logically,
   a sub-segment with filename size 0). This denotes the end of the segment
   and of the overall changegroup.
   </p>
   <p>
   Each filelog sub-segment consists of the following:
   </p>
   <pre>
   +------------------------------------------------------+
   |                 |                      |             |
   | filename length |       filename       | delta group |
   |    (4 bytes)    | (&lt;length - 4&gt; bytes) |  (various)  |
   |                 |                      |             |
   +------------------------------------------------------+
   </pre>
   <p>
   That is, a *chunk* consisting of the filename (not terminated or padded)
   followed by N chunks constituting the *delta group* for this file. The
   *empty chunk* at the end of each *delta group* denotes the boundary to the
   next filelog sub-segment.
   </p>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py 127.0.0.1:$HGPORT "help/unknowntopic"
   404 Not Found
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>test: error</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" width=75 height=90 border=0 alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
   <li><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>error</h3>
   
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   
   <div class="description">
   <p>
   An error occurred while processing your request:
   </p>
   <p>
   Not Found
   </p>
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
   [1]
 
   $ killdaemons.py
 
 #endif

tests/test-narrow-trackedcmd.t

@@ -1,227 +1,227 b''
 #testcases flat tree
   $ . "$TESTDIR/narrow-library.sh"
 
 #if tree
   $ cat << EOF >> $HGRCPATH
   > [experimental]
   > treemanifest = 1
   > EOF
 #endif
 
   $ hg init master
   $ cd master
   $ cat >> .hg/hgrc <<EOF
   > [narrow]
   > serveellipses=True
   > EOF
 
   $ mkdir inside
   $ echo 'inside' > inside/f
   $ hg add inside/f
   $ hg commit -m 'add inside'
 
   $ mkdir widest
   $ echo 'widest' > widest/f
   $ hg add widest/f
   $ hg commit -m 'add widest'
 
   $ mkdir outside
   $ echo 'outside' > outside/f
   $ hg add outside/f
   $ hg commit -m 'add outside'
 
   $ cd ..
 
 narrow clone the inside file
 
   $ hg clone --narrow ssh://user@dummy/master narrow --include inside
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 1 changes to 1 files
   new changesets *:* (glob)
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd narrow
   $ hg tracked
   I path:inside
   $ ls -A
   .hg
   inside
   $ cat inside/f
   inside
   $ cd ..
 
 add more upstream files which we will include in a wider narrow spec
 
   $ cd master
 
   $ mkdir wider
   $ echo 'wider' > wider/f
   $ hg add wider/f
   $ echo 'widest v2' > widest/f
   $ hg commit -m 'add wider, update widest'
 
   $ echo 'widest v3' > widest/f
   $ hg commit -m 'update widest v3'
 
   $ echo 'inside v2' > inside/f
   $ hg commit -m 'update inside'
 
   $ mkdir outside2
   $ echo 'outside2' > outside2/f
   $ hg add outside2/f
   $ hg commit -m 'add outside2'
 
   $ echo 'widest v4' > widest/f
   $ hg commit -m 'update widest v4'
 
   $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
   7: update widest v4
   6: add outside2
   5: update inside
   4: update widest v3
   3: add wider, update widest
   2: add outside
   1: add widest
   0: add inside
 
   $ cd ..
 
 Testing the --import-rules flag of `hg tracked` command
 
   $ cd narrow
   $ hg tracked --import-rules
   hg tracked: option --import-rules requires argument
   hg tracked [OPTIONS]... [REMOTE]
   
   show or change the current narrowspec
   
   options ([+] can be repeated):
   
       --addinclude VALUE [+]       new paths to include
       --removeinclude VALUE [+]    old paths to no longer include
       --auto-remove-includes       automatically choose unused includes to
                                    remove
       --addexclude VALUE [+]       new paths to exclude
       --import-rules VALUE         import narrowspecs from a file
       --removeexclude VALUE [+]    old paths to no longer exclude
       --clear                      whether to replace the existing narrowspec
       --force-delete-local-changes forces deletion of local changes when
                                    narrowing
       --update-working-copy        update working copy when the store has
                                    changed
    -e --ssh CMD                    specify ssh command to use
       --remotecmd CMD              specify hg command to run on the remote side
       --insecure                   do not verify server certificate (ignoring
                                    web.cacerts config)
   
   (use 'hg tracked -h' to show more help)
-  [255]
+  [10]
   $ hg tracked --import-rules doesnotexist
   abort: cannot read narrowspecs from '$TESTTMP/narrow/doesnotexist': $ENOENT$
   [50]
 
   $ cat > specs <<EOF
   > %include foo
   > [include]
   > path:widest/
   > [exclude]
   > path:inside/
   > EOF
 
   $ hg tracked --import-rules specs
   abort: including other spec files using '%include' is not supported in narrowspec
   [10]
 
   $ cat > specs <<EOF
   > [include]
   > outisde
   > [exclude]
   > inside
   > EOF
 
   $ hg tracked --import-rules specs
   comparing with ssh://user@dummy/master
   searching for changes
   looking for local changes to affected paths
   deleting data/inside/f.i
   deleting meta/inside/00manifest.i (tree !)
   saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-widen.hg (glob)
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 0 changes to 0 files
   $ hg tracked
   I path:outisde
   X path:inside
 
 Testing the --import-rules flag with --addinclude and --addexclude
 
   $ cat > specs <<EOF
   > [include]
   > widest
   > EOF
 
   $ hg tracked --import-rules specs --addinclude 'wider/'
   comparing with ssh://user@dummy/master
   searching for changes
   saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-widen.hg (glob)
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 1 changes to 1 files
   $ hg tracked
   I path:outisde
   I path:wider
   I path:widest
   X path:inside
 
   $ cat > specs <<EOF
   > [exclude]
   > outside2
   > EOF
 
   $ hg tracked --import-rules specs --addexclude 'widest'
   comparing with ssh://user@dummy/master
   searching for changes
   looking for local changes to affected paths
   deleting data/widest/f.i
   deleting meta/widest/00manifest.i (tree !)
   $ hg tracked
   I path:outisde
   I path:wider
   X path:inside
   X path:outside2
   X path:widest
 
   $ hg tracked --import-rules specs --clear
   abort: the --clear option is not yet supported
   [10]
 
 Testing with passing a out of wdir file
 
   $ cat > ../nspecs <<EOF
   > [include]
   > widest
   > EOF
 
   $ hg tracked --import-rules ../nspecs
   comparing with ssh://user@dummy/master
   searching for changes
   saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-widen.hg (glob)
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 0 changes to 0 files
 
   $ cd ..
 
 Testing tracked command on a non-narrow repo
 
   $ hg init non-narrow
   $ cd non-narrow
   $ hg tracked --addinclude foobar
   abort: the tracked command is only supported on repositories cloned with --narrow
   [10]

tests/test-qrecord.t

@@ -1,473 +1,473 b''
 Create configuration
 
   $ echo "[ui]" >> $HGRCPATH
   $ echo "interactive=true" >> $HGRCPATH
 
 help record (no record)
 
   $ hg help record
   record extension - commands to interactively select changes for
   commit/qrefresh (DEPRECATED)
   
   The feature provided by this extension has been moved into core Mercurial as
   'hg commit --interactive'.
   
   (use 'hg help extensions' for information on enabling extensions)
 
 help qrecord (no record)
 
   $ hg help qrecord
   'qrecord' is provided by the following extension:
   
       record        commands to interactively select changes for commit/qrefresh
                     (DEPRECATED)
   
   (use 'hg help extensions' for information on enabling extensions)
 
   $ echo "[extensions]"     >> $HGRCPATH
   $ echo "record="          >> $HGRCPATH
 
 help record (record)
 
   $ hg help record
   hg record [OPTION]... [FILE]...
   
   interactively select changes to commit
   
       If a list of files is omitted, all changes reported by 'hg status' will be
       candidates for recording.
   
       See 'hg help dates' for a list of formats valid for -d/--date.
   
       If using the text interface (see 'hg help config'), you will be prompted
       for whether to record changes to each modified file, and for files with
       multiple changes, for each change to use. For each query, the following
       responses are possible:
   
         y - record this change
         n - skip this change
         e - edit this change manually
   
         s - skip remaining changes to this file
         f - record remaining changes to this file
   
         d - done, skip remaining changes and files
         a - record all changes to all remaining files
         q - quit, recording no changes
   
         ? - display help
   
       This command is not available when committing a merge.
   
   (use 'hg help -e record' to show help for the record extension)
   
   options ([+] can be repeated):
   
    -A --addremove           mark new/missing files as added/removed before
                             committing
       --close-branch        mark a branch head as closed
       --amend               amend the parent of the working directory
    -s --secret              use the secret phase for committing
    -e --edit                invoke editor on commit messages
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -m --message TEXT        use text as commit message
    -l --logfile FILE        read commit message from file
    -d --date DATE           record the specified date as commit date
    -u --user USER           record the specified user as committer
    -S --subrepos            recurse into subrepositories
    -w --ignore-all-space    ignore white space when comparing lines
    -b --ignore-space-change ignore changes in the amount of white space
    -B --ignore-blank-lines  ignore changes whose lines are all blank
    -Z --ignore-space-at-eol ignore changes in whitespace at EOL
   
   (some details hidden, use --verbose to show complete help)
 
 help (no mq, so no qrecord)
 
   $ hg help qrecord
   hg qrecord [OPTION]... PATCH [FILE]...
   
   interactively record a new patch
   
       See 'hg help qnew' & 'hg help record' for more information and usage.
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg init a
 
 qrecord (mq not present)
 
   $ hg -R a qrecord
   hg qrecord: invalid arguments
   hg qrecord [OPTION]... PATCH [FILE]...
   
   interactively record a new patch
   
   (use 'hg qrecord -h' to show more help)
-  [255]
+  [10]
 
 qrecord patch (mq not present)
 
   $ hg -R a qrecord patch
   abort: 'mq' extension not loaded
   [255]
 
 help (bad mq)
 
   $ echo "mq=nonexistent" >> $HGRCPATH
   $ hg help qrecord
   *** failed to import extension mq from nonexistent: [Errno *] * (glob)
   hg qrecord [OPTION]... PATCH [FILE]...
   
   interactively record a new patch
   
       See 'hg help qnew' & 'hg help record' for more information and usage.
   
   (some details hidden, use --verbose to show complete help)
 
 help (mq present)
 
   $ sed 's/mq=nonexistent/mq=/' $HGRCPATH > hgrc.tmp
   $ mv hgrc.tmp $HGRCPATH
 
   $ hg help qrecord
   hg qrecord [OPTION]... PATCH [FILE]...
   
   interactively record a new patch
   
       See 'hg help qnew' & 'hg help record' for more information and usage.
   
   options ([+] can be repeated):
   
    -e --edit                invoke editor on commit messages
    -g --git                 use git extended diff format
    -U --currentuser         add "From: <current user>" to patch
    -u --user USER           add "From: <USER>" to patch
    -D --currentdate         add "Date: <current date>" to patch
    -d --date DATE           add "Date: <DATE>" to patch
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -m --message TEXT        use text as commit message
    -l --logfile FILE        read commit message from file
    -w --ignore-all-space    ignore white space when comparing lines
    -b --ignore-space-change ignore changes in the amount of white space
    -B --ignore-blank-lines  ignore changes whose lines are all blank
    -Z --ignore-space-at-eol ignore changes in whitespace at EOL
       --mq                  operate on patch repository
   
   (some details hidden, use --verbose to show complete help)
 
   $ cd a
 
 Base commit
 
   $ cat > 1.txt <<EOF
   > 1
   > 2
   > 3
   > 4
   > 5
   > EOF
   $ cat > 2.txt <<EOF
   > a
   > b
   > c
   > d
   > e
   > f
   > EOF
 
   $ mkdir dir
   $ cat > dir/a.txt <<EOF
   > hello world
   > 
   > someone
   > up
   > there
   > loves
   > me
   > EOF
 
   $ hg add 1.txt 2.txt dir/a.txt
   $ hg commit -m 'initial checkin'
 
 Changing files
 
   $ sed -e 's/2/2 2/;s/4/4 4/' 1.txt > 1.txt.new
   $ sed -e 's/b/b b/' 2.txt > 2.txt.new
   $ sed -e 's/hello world/hello world!/' dir/a.txt > dir/a.txt.new
 
   $ mv -f 1.txt.new 1.txt
   $ mv -f 2.txt.new 2.txt
   $ mv -f dir/a.txt.new dir/a.txt
 
 Whole diff
 
   $ hg diff --nodates
   diff -r 1057167b20ef 1.txt
   --- a/1.txt
   +++ b/1.txt
   @@ -1,5 +1,5 @@
    1
   -2
   +2 2
    3
   -4
   +4 4
    5
   diff -r 1057167b20ef 2.txt
   --- a/2.txt
   +++ b/2.txt
   @@ -1,5 +1,5 @@
    a
   -b
   +b b
    c
    d
    e
   diff -r 1057167b20ef dir/a.txt
   --- a/dir/a.txt
   +++ b/dir/a.txt
   @@ -1,4 +1,4 @@
   -hello world
   +hello world!
    
    someone
    up
 
 qrecord with bad patch name, should abort before prompting
 
   $ hg qrecord .hg
   abort: patch name cannot begin with ".hg"
   [255]
   $ hg qrecord ' foo'
   abort: patch name cannot begin or end with whitespace
   [255]
   $ hg qrecord 'foo '
   abort: patch name cannot begin or end with whitespace
   [255]
 
 qrecord a.patch
 
   $ hg qrecord -d '0 0' -m aaa a.patch <<EOF
   > y
   > y
   > n
   > y
   > y
   > n
   > EOF
   diff --git a/1.txt b/1.txt
   2 hunks, 2 lines changed
   examine changes to '1.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
   @@ -1,3 +1,3 @@
    1
   -2
   +2 2
    3
   record change 1/4 to '1.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
   @@ -3,3 +3,3 @@
    3
   -4
   +4 4
    5
   record change 2/4 to '1.txt'?
   (enter ? for help) [Ynesfdaq?] n
   
   diff --git a/2.txt b/2.txt
   1 hunks, 1 lines changed
   examine changes to '2.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
   @@ -1,5 +1,5 @@
    a
   -b
   +b b
    c
    d
    e
   record change 3/4 to '2.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
   diff --git a/dir/a.txt b/dir/a.txt
   1 hunks, 1 lines changed
   examine changes to 'dir/a.txt'?
   (enter ? for help) [Ynesfdaq?] n
   
 
 After qrecord a.patch 'tip'"
 
   $ hg tip -p
   changeset:   1:5d1ca63427ee
   tag:         a.patch
   tag:         qbase
   tag:         qtip
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     aaa
   
   diff -r 1057167b20ef -r 5d1ca63427ee 1.txt
   --- a/1.txt	Thu Jan 01 00:00:00 1970 +0000
   +++ b/1.txt	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,5 +1,5 @@
    1
   -2
   +2 2
    3
    4
    5
   diff -r 1057167b20ef -r 5d1ca63427ee 2.txt
   --- a/2.txt	Thu Jan 01 00:00:00 1970 +0000
   +++ b/2.txt	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,5 +1,5 @@
    a
   -b
   +b b
    c
    d
    e
   
 
 After qrecord a.patch 'diff'"
 
   $ hg diff --nodates
   diff -r 5d1ca63427ee 1.txt
   --- a/1.txt
   +++ b/1.txt
   @@ -1,5 +1,5 @@
    1
    2 2
    3
   -4
   +4 4
    5
   diff -r 5d1ca63427ee dir/a.txt
   --- a/dir/a.txt
   +++ b/dir/a.txt
   @@ -1,4 +1,4 @@
   -hello world
   +hello world!
    
    someone
    up
 
 qrecord b.patch
 
   $ hg qrecord -d '0 0' -m bbb b.patch <<EOF
   > y
   > y
   > y
   > y
   > EOF
   diff --git a/1.txt b/1.txt
   1 hunks, 1 lines changed
   examine changes to '1.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
   @@ -1,5 +1,5 @@
    1
    2 2
    3
   -4
   +4 4
    5
   record change 1/2 to '1.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
   diff --git a/dir/a.txt b/dir/a.txt
   1 hunks, 1 lines changed
   examine changes to 'dir/a.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
   @@ -1,4 +1,4 @@
   -hello world
   +hello world!
    
    someone
    up
   record change 2/2 to 'dir/a.txt'?
   (enter ? for help) [Ynesfdaq?] y
   
 
 After qrecord b.patch 'tip'
 
   $ hg tip -p
   changeset:   2:b056198bf878
   tag:         b.patch
   tag:         qtip
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     bbb
   
   diff -r 5d1ca63427ee -r b056198bf878 1.txt
   --- a/1.txt	Thu Jan 01 00:00:00 1970 +0000
   +++ b/1.txt	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,5 +1,5 @@
    1
    2 2
    3
   -4
   +4 4
    5
   diff -r 5d1ca63427ee -r b056198bf878 dir/a.txt
   --- a/dir/a.txt	Thu Jan 01 00:00:00 1970 +0000
   +++ b/dir/a.txt	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,4 +1,4 @@
   -hello world
   +hello world!
    
    someone
    up
   
 
 After qrecord b.patch 'diff'
 
   $ hg diff --nodates
 
   $ cd ..
 
 qrecord should throw an error when histedit in process
 
   $ hg init issue5981
   $ cd issue5981
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > mq=
   > EOF
   $ echo > a
   $ hg ci -Am 'foo bar'
   adding a
   $ hg log
   changeset:   0:ea55e2ae468f
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     foo bar
   
   $ hg histedit tip --commands - 2>&1 <<EOF
   > edit ea55e2ae468f foo bar
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   Editing (ea55e2ae468f), commit as needed now to split the change
   (to edit ea55e2ae468f, `hg histedit --continue` after making changes)
   [240]
   $ echo 'foo bar' > a
   $ hg qrecord -d '0 0' -m aaa a.patch <<EOF
   > y
   > y
   > n
   > y
   > y
   > n
   > EOF
   abort: histedit in progress
   (use 'hg histedit --continue' or 'hg histedit --abort')
   [20]

tests/test-share-safe.t

@@ -1,579 +1,579 b''
 setup
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > share =
   > [format]
   > exp-share-safe = True
   > EOF
 
 prepare source repo
 
   $ hg init source
   $ cd source
   $ cat .hg/requires
   exp-sharesafe
   $ cat .hg/store/requires
   dotencode
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
   $ hg debugrequirements
   dotencode
   exp-sharesafe
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
 
   $ echo a > a
   $ hg ci -Aqm "added a"
   $ echo b > b
   $ hg ci -Aqm "added b"
 
   $ HGEDITOR=cat hg config --shared
   abort: repository is not shared; can't use --shared
   [10]
   $ cd ..
 
 Create a shared repo and check the requirements are shared and read correctly
   $ hg share source shared1
   updating working directory
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd shared1
   $ cat .hg/requires
   exp-sharesafe
   shared
 
   $ hg debugrequirements -R ../source
   dotencode
   exp-sharesafe
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
 
   $ hg debugrequirements
   dotencode
   exp-sharesafe
   fncache
   generaldelta
   revlogv1
   shared
   sparserevlog
   store
 
   $ echo c > c
   $ hg ci -Aqm "added c"
 
 Check that config of the source repository is also loaded
 
   $ hg showconfig ui.curses
   [1]
 
   $ echo "[ui]" >> ../source/.hg/hgrc
   $ echo "curses=true" >> ../source/.hg/hgrc
 
   $ hg showconfig ui.curses
   true
 
 Test that extensions of source repository are also loaded
 
   $ hg debugextensions
   share
   $ hg extdiff -p echo
   hg: unknown command 'extdiff'
   'extdiff' is provided by the following extension:
   
       extdiff       command to allow external programs to compare revisions
   
   (use 'hg help extensions' for information on enabling extensions)
-  [255]
+  [10]
 
   $ echo "[extensions]" >> ../source/.hg/hgrc
   $ echo "extdiff=" >> ../source/.hg/hgrc
 
   $ hg debugextensions -R ../source
   extdiff
   share
   $ hg extdiff -R ../source -p echo
 
 BROKEN: the command below will not work if config of shared source is not loaded
 on dispatch but debugextensions says that extension
 is loaded
   $ hg debugextensions
   extdiff
   share
 
   $ hg extdiff -p echo
 
 However, local .hg/hgrc should override the config set by share source
 
   $ echo "[ui]" >> .hg/hgrc
   $ echo "curses=false" >> .hg/hgrc
 
   $ hg showconfig ui.curses
   false
 
   $ HGEDITOR=cat hg config --shared
   [ui]
   curses=true
   [extensions]
   extdiff=
 
   $ HGEDITOR=cat hg config --local
   [ui]
   curses=false
 
 Testing that hooks set in source repository also runs in shared repo
 
   $ cd ../source
   $ cat <<EOF >> .hg/hgrc
   > [extensions]
   > hooklib=
   > [hooks]
   > pretxnchangegroup.reject_merge_commits = \
   >   python:hgext.hooklib.reject_merge_commits.hook
   > EOF
 
   $ cd ..
   $ hg clone source cloned
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd cloned
   $ hg up 0
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ echo bar > bar
   $ hg ci -Aqm "added bar"
   $ hg merge
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg ci -m "merge commit"
 
   $ hg push ../source
   pushing to ../source
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   error: pretxnchangegroup.reject_merge_commits hook failed: bcde3522682d rejected as merge on the same branch. Please consider rebase.
   transaction abort!
   rollback completed
   abort: bcde3522682d rejected as merge on the same branch. Please consider rebase.
   [255]
 
   $ hg push ../shared1
   pushing to ../shared1
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   error: pretxnchangegroup.reject_merge_commits hook failed: bcde3522682d rejected as merge on the same branch. Please consider rebase.
   transaction abort!
   rollback completed
   abort: bcde3522682d rejected as merge on the same branch. Please consider rebase.
   [255]
 
 Test that if share source config is untrusted, we dont read it
 
   $ cd ../shared1
 
   $ cat << EOF > $TESTTMP/untrusted.py
   > from mercurial import scmutil, util
   > def uisetup(ui):
   >     class untrustedui(ui.__class__):
   >         def _trusted(self, fp, f):
   >             if util.normpath(fp.name).endswith(b'source/.hg/hgrc'):
   >                 return False
   >             return super(untrustedui, self)._trusted(fp, f)
   >     ui.__class__ = untrustedui
   > EOF
 
   $ hg showconfig hooks
   hooks.pretxnchangegroup.reject_merge_commits=python:hgext.hooklib.reject_merge_commits.hook
 
   $ hg showconfig hooks --config extensions.untrusted=$TESTTMP/untrusted.py
   [1]
 
 Update the source repository format and check that shared repo works
 
   $ cd ../source
 
 Disable zstd related tests because its not present on pure version
 #if zstd
   $ echo "[format]" >> .hg/hgrc
   $ echo "revlog-compression=zstd" >> .hg/hgrc
 
   $ hg debugupgraderepo --run -q
   upgrade will perform the following actions:
   
   requirements
      preserved: dotencode, exp-sharesafe, fncache, generaldelta, revlogv1, sparserevlog, store
      added: revlog-compression-zstd
   
   processed revlogs:
     - all-filelogs
     - changelog
     - manifest
   
   $ hg log -r .
   changeset:   1:5f6d8a4bf34a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     added b
   
 #endif
   $ echo "[format]" >> .hg/hgrc
   $ echo "use-persistent-nodemap=True" >> .hg/hgrc
 
   $ hg debugupgraderepo --run -q -R ../shared1
   abort: cannot upgrade repository; unsupported source requirement: shared
   [255]
 
   $ hg debugupgraderepo --run -q
   upgrade will perform the following actions:
   
   requirements
      preserved: dotencode, exp-sharesafe, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd !)
      preserved: dotencode, exp-sharesafe, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !)
      added: persistent-nodemap
   
   processed revlogs:
     - all-filelogs
     - changelog
     - manifest
   
   $ hg log -r .
   changeset:   1:5f6d8a4bf34a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     added b
   
 
 Shared one should work
   $ cd ../shared1
   $ hg log -r .
   changeset:   2:155349b645be
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     added c
   
 
 Testing that nonsharedrc is loaded for source and not shared
 
   $ cd ../source
   $ touch .hg/hgrc-not-shared
   $ echo "[ui]" >> .hg/hgrc-not-shared
   $ echo "traceback=true" >> .hg/hgrc-not-shared
 
   $ hg showconfig ui.traceback
   true
 
   $ HGEDITOR=cat hg config --non-shared
   [ui]
   traceback=true
 
   $ cd ../shared1
   $ hg showconfig ui.traceback
   [1]
 
 Unsharing works
 
   $ hg unshare
 
 Test that source config is added to the shared one after unshare, and the config
 of current repo is still respected over the config which came from source config
   $ cd ../cloned
   $ hg push ../shared1
   pushing to ../shared1
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   error: pretxnchangegroup.reject_merge_commits hook failed: bcde3522682d rejected as merge on the same branch. Please consider rebase.
   transaction abort!
   rollback completed
   abort: bcde3522682d rejected as merge on the same branch. Please consider rebase.
   [255]
   $ hg showconfig ui.curses -R ../shared1
   false
 
   $ cd ../
 
 Test that upgrading using debugupgraderepo works
 =================================================
 
   $ hg init non-share-safe --config format.exp-share-safe=false
   $ cd non-share-safe
   $ hg debugrequirements
   dotencode
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
   $ echo foo > foo
   $ hg ci -Aqm 'added foo'
   $ echo bar > bar
   $ hg ci -Aqm 'added bar'
 
 Create a share before upgrading
 
   $ cd ..
   $ hg share non-share-safe nss-share
   updating working directory
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg debugrequirements -R nss-share
   dotencode
   fncache
   generaldelta
   revlogv1
   shared
   sparserevlog
   store
   $ cd non-share-safe
 
 Upgrade
 
   $ hg debugupgraderepo -q
   requirements
      preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store
      added: exp-sharesafe
   
   processed revlogs:
     - all-filelogs
     - changelog
     - manifest
   
   $ hg debugupgraderepo --run -q
   upgrade will perform the following actions:
   
   requirements
      preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store
      added: exp-sharesafe
   
   processed revlogs:
     - all-filelogs
     - changelog
     - manifest
   
   repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode.
 
   $ hg debugrequirements
   dotencode
   exp-sharesafe
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
 
   $ cat .hg/requires
   exp-sharesafe
 
   $ cat .hg/store/requires
   dotencode
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
 
   $ hg log -GT "{node}: {desc}\n"
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
 Make sure existing shares still works
 
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share --config experimental.sharesafe-warn-outdated-shares=false
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share
   warning: source repository supports share-safe functionality. Reshare to upgrade.
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
 
 Create a safe share from upgrade one
 
   $ cd ..
   $ hg share non-share-safe ss-share
   updating working directory
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd ss-share
   $ hg log -GT "{node}: {desc}\n"
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
   $ cd ../non-share-safe
 
 Test that downgrading works too
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > share =
   > [format]
   > exp-share-safe = False
   > EOF
 
   $ hg debugupgraderepo -q
   requirements
      preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store
      removed: exp-sharesafe
   
   processed revlogs:
     - all-filelogs
     - changelog
     - manifest
   
   $ hg debugupgraderepo -q --run
   upgrade will perform the following actions:
   
   requirements
      preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store
      removed: exp-sharesafe
   
   processed revlogs:
     - all-filelogs
     - changelog
     - manifest
   
   repository downgraded to not use share safe mode, existing shares will not work and needs to be reshared.
 
   $ hg debugrequirements
   dotencode
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
 
   $ cat .hg/requires
   dotencode
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
 
   $ test -f .hg/store/requires
   [1]
 
   $ hg log -GT "{node}: {desc}\n"
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
 Make sure existing shares still works
 
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
   $ hg log -GT "{node}: {desc}\n" -R ../ss-share
   abort: share source does not support exp-sharesafe requirement
   [255]
 
 Testing automatic downgrade of shares when config is set
 
   $ touch ../ss-share/.hg/wlock
   $ hg log -GT "{node}: {desc}\n" -R ../ss-share --config experimental.sharesafe-auto-downgrade-shares=true
   abort: failed to downgrade share, got error: Lock held
   [255]
   $ rm ../ss-share/.hg/wlock
 
   $ hg log -GT "{node}: {desc}\n" -R ../ss-share --config experimental.sharesafe-auto-downgrade-shares=true
   repository downgraded to not use share-safe mode
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
   $ hg log -GT "{node}: {desc}\n" -R ../ss-share
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
 
 Testing automatic upgrade of shares when config is set
 
   $ hg debugupgraderepo -q --run --config format.exp-share-safe=True
   upgrade will perform the following actions:
   
   requirements
      preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store
      added: exp-sharesafe
   
   processed revlogs:
     - all-filelogs
     - changelog
     - manifest
   
   repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode.
   $ hg debugrequirements
   dotencode
   exp-sharesafe
   fncache
   generaldelta
   revlogv1
   sparserevlog
   store
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share
   warning: source repository supports share-safe functionality. Reshare to upgrade.
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
 Check that if lock is taken, upgrade fails but read operation are successful
   $ touch ../nss-share/.hg/wlock
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share --config experimental.sharesafe-auto-upgrade-shares=true
   failed to upgrade share, got error: Lock held
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share --config experimental.sharesafe-auto-upgrade-shares=true --config experimental.sharesafe-warn-outdated-shares=false
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share --config experimental.sharesafe-auto-upgrade-shares=true --config experimental.sharesafe-auto-upgrade-fail-error=true
   abort: failed to upgrade share, got error: Lock held
   [255]
 
   $ rm ../nss-share/.hg/wlock
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share --config experimental.sharesafe-auto-upgrade-shares=true
   repository upgraded to use share-safe mode
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   
 
 Test that unshare works
 
   $ hg unshare -R ../nss-share
   $ hg log -GT "{node}: {desc}\n" -R ../nss-share
   @  f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
   |
   o  f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
   

tests/test-status-color.t

@@ -1,407 +1,407 b''
   $ cat <<EOF >> $HGRCPATH
   > [ui]
   > color = always
   > [color]
   > mode = ansi
   > EOF
 Terminfo codes compatibility fix
   $ echo "color.none=0" >> $HGRCPATH
 
   $ hg init repo1
   $ cd repo1
   $ mkdir a b a/1 b/1 b/2
   $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2
 
 hg status in repo root:
 
   $ hg status
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
 
   $ hg status --color=debug
   [status.unknown|? ][status.unknown|a/1/in_a_1]
   [status.unknown|? ][status.unknown|a/in_a]
   [status.unknown|? ][status.unknown|b/1/in_b_1]
   [status.unknown|? ][status.unknown|b/2/in_b_2]
   [status.unknown|? ][status.unknown|b/in_b]
   [status.unknown|? ][status.unknown|in_root]
 HGPLAIN disables color
   $ HGPLAIN=1 hg status --color=debug
   ? a/1/in_a_1 (glob)
   ? a/in_a (glob)
   ? b/1/in_b_1 (glob)
   ? b/2/in_b_2 (glob)
   ? b/in_b (glob)
   ? in_root
 HGPLAINEXCEPT=color does not disable color
   $ HGPLAINEXCEPT=color hg status --color=debug
   [status.unknown|? ][status.unknown|a/1/in_a_1] (glob)
   [status.unknown|? ][status.unknown|a/in_a] (glob)
   [status.unknown|? ][status.unknown|b/1/in_b_1] (glob)
   [status.unknown|? ][status.unknown|b/2/in_b_2] (glob)
   [status.unknown|? ][status.unknown|b/in_b] (glob)
   [status.unknown|? ][status.unknown|in_root]
 
 hg status with template
   $ hg status -T "{label('red', path)}\n" --color=debug
   [red|a/1/in_a_1]
   [red|a/in_a]
   [red|b/1/in_b_1]
   [red|b/2/in_b_2]
   [red|b/in_b]
   [red|in_root]
 
 hg status . in repo root:
 
   $ hg status .
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
 
   $ hg status --cwd a
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
   $ hg status --cwd a .
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a\x1b[0m (esc)
   $ hg status --cwd a ..
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../b/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../b/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../b/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_root\x1b[0m (esc)
 
   $ hg status --cwd b
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
   $ hg status --cwd b .
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b\x1b[0m (esc)
   $ hg status --cwd b ..
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../a/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../a/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_root\x1b[0m (esc)
 
   $ hg status --cwd a/1
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
   $ hg status --cwd a/1 .
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a_1\x1b[0m (esc)
   $ hg status --cwd a/1 ..
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_a\x1b[0m (esc)
 
   $ hg status --cwd b/1
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
   $ hg status --cwd b/1 .
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_1\x1b[0m (esc)
   $ hg status --cwd b/1 ..
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_b\x1b[0m (esc)
 
   $ hg status --cwd b/2
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
   $ hg status --cwd b/2 .
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_2\x1b[0m (esc)
   $ hg status --cwd b/2 ..
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../1/in_b_1\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_2\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_b\x1b[0m (esc)
 
 Make sure --color=never works
   $ hg status --color=never
   ? a/1/in_a_1
   ? a/in_a
   ? b/1/in_b_1
   ? b/2/in_b_2
   ? b/in_b
   ? in_root
 
 Make sure ui.formatted=False works
   $ hg status --color=auto --config ui.formatted=False
   ? a/1/in_a_1
   ? a/in_a
   ? b/1/in_b_1
   ? b/2/in_b_2
   ? b/in_b
   ? in_root
 
   $ cd ..
 
   $ hg init repo2
   $ cd repo2
   $ touch modified removed deleted ignored
   $ echo "^ignored$" > .hgignore
   $ hg ci -A -m 'initial checkin'
   \x1b[0;32madding .hgignore\x1b[0m (esc)
   \x1b[0;32madding deleted\x1b[0m (esc)
   \x1b[0;32madding modified\x1b[0m (esc)
   \x1b[0;32madding removed\x1b[0m (esc)
   $ hg log --color=debug
   [log.changeset changeset.draft|changeset:   0:389aef86a55e]
   [log.tag|tag:         tip]
   [log.user|user:        test]
   [log.date|date:        Thu Jan 01 00:00:00 1970 +0000]
   [log.summary|summary:     initial checkin]
   
   $ hg log -Tcompact --color=debug
   [log.changeset changeset.draft|0][tip]   [log.node|389aef86a55e]   [log.date|1970-01-01 00:00 +0000]   [log.user|test]
     [ui.note log.description|initial checkin]
   
 Labels on empty strings should not be displayed, labels on custom
 templates should be.
 
   $ hg log --color=debug -T '{label("my.label",author)}\n{label("skipped.label","")}'
   [my.label|test]
   $ touch modified added unknown ignored
   $ hg add added
   $ hg remove removed
   $ rm deleted
 
 hg status:
 
   $ hg status
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
   \x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
   \x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
 
 hg status modified added removed deleted unknown never-existed ignored:
 
   $ hg status modified added removed deleted unknown never-existed ignored
   never-existed: * (glob)
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
   \x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
   \x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
 
   $ hg copy modified copied
 
 hg status -C:
 
   $ hg status -C
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1mcopied\x1b[0m (esc)
   \x1b[0;0m  modified\x1b[0m (esc)
   \x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
   \x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
 
 hg status -A:
 
   $ hg status -A
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1mcopied\x1b[0m (esc)
   \x1b[0;0m  modified\x1b[0m (esc)
   \x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
   \x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
   \x1b[0;30;1mI \x1b[0m\x1b[0;30;1mignored\x1b[0m (esc)
   \x1b[0;0mC \x1b[0m\x1b[0;0m.hgignore\x1b[0m (esc)
   \x1b[0;0mC \x1b[0m\x1b[0;0mmodified\x1b[0m (esc)
 
 
 hg status -A (with terminfo color):
 
 #if tic
 
   $ tic -o "$TESTTMP/terminfo" "$TESTDIR/hgterm.ti"
   $ ln -s "$TESTTMP/terminfo" "$TESTTMP/terminfo.cdb"
   $ TERM=hgterm TERMINFO="$TESTTMP/terminfo" hg status --config color.mode=terminfo -A
   \x1b[30m\x1b[32m\x1b[1mA \x1b[30m\x1b[30m\x1b[32m\x1b[1madded\x1b[30m (esc)
   \x1b[30m\x1b[32m\x1b[1mA \x1b[30m\x1b[30m\x1b[32m\x1b[1mcopied\x1b[30m (esc)
   \x1b[30m\x1b[30m  modified\x1b[30m (esc)
   \x1b[30m\x1b[31m\x1b[1mR \x1b[30m\x1b[30m\x1b[31m\x1b[1mremoved\x1b[30m (esc)
   \x1b[30m\x1b[36m\x1b[1m\x1b[4m! \x1b[30m\x1b[30m\x1b[36m\x1b[1m\x1b[4mdeleted\x1b[30m (esc)
   \x1b[30m\x1b[35m\x1b[1m\x1b[4m? \x1b[30m\x1b[30m\x1b[35m\x1b[1m\x1b[4munknown\x1b[30m (esc)
   \x1b[30m\x1b[30m\x1b[1mI \x1b[30m\x1b[30m\x1b[30m\x1b[1mignored\x1b[30m (esc)
   \x1b[30m\x1b[30mC \x1b[30m\x1b[30m\x1b[30m.hgignore\x1b[30m (esc)
   \x1b[30m\x1b[30mC \x1b[30m\x1b[30m\x1b[30mmodified\x1b[30m (esc)
 
 The user can define effects with raw terminfo codes:
 
   $ cat <<EOF >> $HGRCPATH
   > # Completely bogus code for dim
   > terminfo.dim = \E[88m
   > # We can override what's in the terminfo database, too
   > terminfo.bold = \E[2m
   > EOF
   $ TERM=hgterm TERMINFO="$TESTTMP/terminfo" hg status --config color.mode=terminfo --config color.status.clean=dim -A
   \x1b[30m\x1b[32m\x1b[2mA \x1b[30m\x1b[30m\x1b[32m\x1b[2madded\x1b[30m (esc)
   \x1b[30m\x1b[32m\x1b[2mA \x1b[30m\x1b[30m\x1b[32m\x1b[2mcopied\x1b[30m (esc)
   \x1b[30m\x1b[30m  modified\x1b[30m (esc)
   \x1b[30m\x1b[31m\x1b[2mR \x1b[30m\x1b[30m\x1b[31m\x1b[2mremoved\x1b[30m (esc)
   \x1b[30m\x1b[36m\x1b[2m\x1b[4m! \x1b[30m\x1b[30m\x1b[36m\x1b[2m\x1b[4mdeleted\x1b[30m (esc)
   \x1b[30m\x1b[35m\x1b[2m\x1b[4m? \x1b[30m\x1b[30m\x1b[35m\x1b[2m\x1b[4munknown\x1b[30m (esc)
   \x1b[30m\x1b[30m\x1b[2mI \x1b[30m\x1b[30m\x1b[30m\x1b[2mignored\x1b[30m (esc)
   \x1b[30m\x1b[88mC \x1b[30m\x1b[30m\x1b[88m.hgignore\x1b[30m (esc)
   \x1b[30m\x1b[88mC \x1b[30m\x1b[30m\x1b[88mmodified\x1b[30m (esc)
 
 #endif
 
 
   $ echo "^ignoreddir$" > .hgignore
   $ mkdir ignoreddir
   $ touch ignoreddir/file
 
 hg status ignoreddir/file:
 
   $ hg status ignoreddir/file
 
 hg status -i ignoreddir/file:
 
   $ hg status -i ignoreddir/file
   \x1b[0;30;1mI \x1b[0m\x1b[0;30;1mignoreddir/file\x1b[0m (esc)
   $ cd ..
 
 check 'status -q' and some combinations
 
   $ hg init repo3
   $ cd repo3
   $ touch modified removed deleted ignored
   $ echo "^ignored$" > .hgignore
   $ hg commit -A -m 'initial checkin'
   \x1b[0;32madding .hgignore\x1b[0m (esc)
   \x1b[0;32madding deleted\x1b[0m (esc)
   \x1b[0;32madding modified\x1b[0m (esc)
   \x1b[0;32madding removed\x1b[0m (esc)
   $ touch added unknown ignored
   $ hg add added
   $ echo "test" >> modified
   $ hg remove removed
   $ rm deleted
   $ hg copy modified copied
 
 test unknown color
 
   $ hg --config color.status.modified=periwinkle status
   ignoring unknown color/effect 'periwinkle' (configured in color.status.modified)
   ignoring unknown color/effect 'periwinkle' (configured in color.status.modified)
   ignoring unknown color/effect 'periwinkle' (configured in color.status.modified)
   M modified
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
   \x1b[0;32;1mA \x1b[0m\x1b[0;32;1mcopied\x1b[0m (esc)
   \x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
   \x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
   \x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
 
 Run status with 2 different flags.
 Check if result is the same or different.
 If result is not as expected, raise error
 
   $ assert() {
   >     hg status $1 > ../a
   >     hg status $2 > ../b
   >     if diff ../a ../b > /dev/null; then
   >         out=0
   >     else
   >         out=1
   >     fi
   >     if [ $3 -eq 0 ]; then
   >         df="same"
   >     else
   >         df="different"
   >     fi
   >     if [ $out -ne $3 ]; then
   >         echo "Error on $1 and $2, should be $df."
   >     fi
   > }
 
 assert flag1 flag2 [0-same | 1-different]
 
   $ assert "-q" "-mard"      0
   $ assert "-A" "-marduicC"  0
   $ assert "-qA" "-mardcC"   0
   $ assert "-qAui" "-A"      0
   $ assert "-qAu" "-marducC" 0
   $ assert "-qAi" "-mardicC" 0
   $ assert "-qu" "-u"        0
   $ assert "-q" "-u"         1
   $ assert "-m" "-a"         1
   $ assert "-r" "-d"         1
   $ cd ..
 
 test 'resolve -l'
 
   $ hg init repo4
   $ cd repo4
   $ echo "file a" > a
   $ echo "file b" > b
   $ hg add a b
   $ hg commit -m "initial"
   $ echo "file a change 1" > a
   $ echo "file b change 1" > b
   $ hg commit -m "head 1"
   $ hg update 0
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo "file a change 2" > a
   $ echo "file b change 2" > b
   $ hg commit -m "head 2"
   created new head
   $ hg merge
   merging a
   merging b
   warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
   warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
   0 files updated, 0 files merged, 0 files removed, 2 files unresolved
   use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
   [1]
   $ hg resolve -m b
 
 hg resolve with one unresolved, one resolved:
 
   $ hg resolve -l
   \x1b[0;31;1mU \x1b[0m\x1b[0;31;1ma\x1b[0m (esc)
   \x1b[0;32;1mR \x1b[0m\x1b[0;32;1mb\x1b[0m (esc)
 
 color coding of error message with current availability of curses
 
   $ hg unknowncommand > /dev/null
   hg: unknown command 'unknowncommand'
   (use 'hg help' for a list of commands)
-  [255]
+  [10]
 
 color coding of error message without curses
 
   $ echo 'raise ImportError' > curses.py
   $ PYTHONPATH=`pwd`:$PYTHONPATH hg unknowncommand > /dev/null
   hg: unknown command 'unknowncommand'
   (use 'hg help' for a list of commands)
-  [255]
+  [10]
 
   $ cd ..

tests/test-strict.t

@@ -1,26 +1,26 b''
   $ hg init
 
   $ echo a > a
   $ hg ci -Ama
   adding a
 
   $ hg an a
   0: a
 
   $ hg --config ui.strict=False an a
   0: a
 
   $ echo "[ui]" >> $HGRCPATH
   $ echo "strict=True" >> $HGRCPATH
 
   $ hg an a
   hg: unknown command 'an'
   (use 'hg help' for a list of commands)
-  [255]
+  [10]
   $ hg annotate a
   0: a
 
 should succeed - up is an alias, not an abbreviation
 
   $ hg up
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved

tests/test-strip.t

@@ -1,1459 +1,1459 b''
   $ echo "[extensions]" >> $HGRCPATH
   $ echo "strip=" >> $HGRCPATH
   $ echo "drawdag=$TESTDIR/drawdag.py" >> $HGRCPATH
 
   $ restore() {
   >     hg unbundle -q .hg/strip-backup/*
   >     rm .hg/strip-backup/*
   > }
   $ teststrip() {
   >     hg up -C $1
   >     echo % before update $1, strip $2
   >     hg log -G -T '{rev}:{node}'
   >     hg --traceback debugstrip $2
   >     echo % after update $1, strip $2
   >     hg log -G -T '{rev}:{node}'
   >     restore
   > }
 
   $ hg init test
   $ cd test
 
   $ echo foo > bar
   $ hg ci -Ama
   adding bar
 
   $ echo more >> bar
   $ hg ci -Amb
 
   $ echo blah >> bar
   $ hg ci -Amc
 
   $ hg up 1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo blah >> bar
   $ hg ci -Amd
   created new head
 
   $ echo final >> bar
   $ hg ci -Ame
 
   $ hg log
   changeset:   4:443431ffac4f
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     e
   
   changeset:   3:65bd5f99a4a3
   parent:      1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     d
   
   changeset:   2:264128213d29
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     c
   
   changeset:   1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     b
   
   changeset:   0:9ab35a2d17cb
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     a
   
 
   $ teststrip 4 4
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   % before update 4, strip 4
   @  4:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   |
   o  3:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   | o  2:264128213d290d868c54642d13aeaa3675551a78
   |/
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   % after update 4, strip 4
   @  3:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   | o  2:264128213d290d868c54642d13aeaa3675551a78
   |/
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   $ teststrip 4 3
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   % before update 4, strip 3
   @  4:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   |
   o  3:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   | o  2:264128213d290d868c54642d13aeaa3675551a78
   |/
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   % after update 4, strip 3
   o  2:264128213d290d868c54642d13aeaa3675551a78
   |
   @  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   $ teststrip 1 4
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   % before update 1, strip 4
   o  4:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   |
   o  3:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   | o  2:264128213d290d868c54642d13aeaa3675551a78
   |/
   @  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   % after update 1, strip 4
   o  3:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   | o  2:264128213d290d868c54642d13aeaa3675551a78
   |/
   @  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   $ teststrip 4 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   % before update 4, strip 2
   @  4:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   |
   o  3:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   | o  2:264128213d290d868c54642d13aeaa3675551a78
   |/
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   % after update 4, strip 2
   @  3:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   |
   o  2:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   $ teststrip 4 1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   % before update 4, strip 1
   @  4:264128213d290d868c54642d13aeaa3675551a78
   |
   | o  3:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   | |
   | o  2:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |/
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   % after update 4, strip 1
   @  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   $ teststrip null 4
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   % before update null, strip 4
   o  4:264128213d290d868c54642d13aeaa3675551a78
   |
   | o  3:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   | |
   | o  2:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |/
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   % after update null, strip 4
   o  3:443431ffac4f5b5a19b0b6c298a21b7ba736bcce
   |
   o  2:65bd5f99a4a376cdea23a1153f07856b0d881d64
   |
   o  1:ef3a871183d7199c541cc140218298bbfcc6c28a
   |
   o  0:9ab35a2d17cb64271241ea881efcc19dd953215b
   
 
   $ hg log
   changeset:   4:264128213d29
   tag:         tip
   parent:      1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     c
   
   changeset:   3:443431ffac4f
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     e
   
   changeset:   2:65bd5f99a4a3
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     d
   
   changeset:   1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     b
   
   changeset:   0:9ab35a2d17cb
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     a
   
   $ hg up -C 4
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg parents
   changeset:   4:264128213d29
   tag:         tip
   parent:      1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     c
   
 
   $ hg --traceback strip 4
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/264128213d29-0b39d6bf-backup.hg
   $ hg parents
   changeset:   1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     b
   
   $ hg debugbundle .hg/strip-backup/*
   Stream params: {Compression: BZ}
   changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
       264128213d290d868c54642d13aeaa3675551a78
   cache:rev-branch-cache -- {} (mandatory: False)
   phase-heads -- {} (mandatory: True)
       264128213d290d868c54642d13aeaa3675551a78 draft
   $ hg unbundle .hg/strip-backup/*
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 0 changes to 1 files (+1 heads)
   new changesets 264128213d29 (1 drafts)
   (run 'hg heads' to see heads, 'hg merge' to merge)
   $ rm .hg/strip-backup/*
   $ hg log --graph
   o  changeset:   4:264128213d29
   |  tag:         tip
   |  parent:      1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   | o  changeset:   3:443431ffac4f
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     e
   | |
   | o  changeset:   2:65bd5f99a4a3
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     d
   |
   @  changeset:   1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ hg up -C 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg merge 4
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
 
 before strip of merge parent
 
   $ hg parents
   changeset:   2:65bd5f99a4a3
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     d
   
   changeset:   4:264128213d29
   tag:         tip
   parent:      1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     c
   
 ##strip not allowed with merge in progress
   $ hg strip 4
   abort: outstanding uncommitted merge
   (use 'hg commit' or 'hg merge --abort')
   [20]
 ##strip allowed --force with merge in progress
   $ hg strip 4 --force
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
 
 after strip of merge parent
 
   $ hg parents
   changeset:   1:ef3a871183d7
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     b
   
   $ restore
 
   $ hg up
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   updated to "264128213d29: c"
   1 other heads for branch "default"
   $ hg log -G
   @  changeset:   4:264128213d29
   |  tag:         tip
   |  parent:      1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   | o  changeset:   3:443431ffac4f
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     e
   | |
   | o  changeset:   2:65bd5f99a4a3
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     d
   |
   o  changeset:   1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 2 is parent of 3, only one strip should happen
 
   $ hg strip "roots(2)" 3
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   $ hg log -G
   @  changeset:   2:264128213d29
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ restore
   $ hg log -G
   o  changeset:   4:443431ffac4f
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:65bd5f99a4a3
   |  parent:      1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   | @  changeset:   2:264128213d29
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     c
   |
   o  changeset:   1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 Failed hook while applying "saveheads" bundle.
 
   $ hg strip 2 --config hooks.pretxnchangegroup.bad=false
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   transaction abort!
   rollback completed
   strip failed, backup bundle stored in '$TESTTMP/test/.hg/strip-backup/*-backup.hg' (glob)
   strip failed, unrecovered changes stored in '$TESTTMP/test/.hg/strip-backup/*-temp.hg' (glob)
   (fix the problem, then recover the changesets with "hg unbundle '$TESTTMP/test/.hg/strip-backup/*-temp.hg'") (glob)
   abort: pretxnchangegroup.bad hook exited with status 1
   [255]
   $ restore
   $ hg log -G
   o  changeset:   4:443431ffac4f
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:65bd5f99a4a3
   |  parent:      1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   | o  changeset:   2:264128213d29
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     c
   |
   @  changeset:   1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 2 different branches: 2 strips
 
   $ hg strip 2 4
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   $ hg log -G
   o  changeset:   2:65bd5f99a4a3
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   @  changeset:   1:ef3a871183d7
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ restore
 
 2 different branches and a common ancestor: 1 strip
 
   $ hg strip 1 "2|4"
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   $ restore
 
 verify fncache is kept up-to-date
 
   $ touch a
   $ hg ci -qAm a
 #if repofncache
   $ cat .hg/store/fncache | sort
   data/a.i
   data/bar.i
 #endif
 
   $ hg strip tip
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
 #if repofncache
   $ cat .hg/store/fncache
   data/bar.i
 #endif
 
 stripping an empty revset
 
   $ hg strip "1 and not 1"
   abort: empty revision set
   [255]
 
 remove branchy history for qimport tests
 
   $ hg strip 3
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
 
 
 strip of applied mq should cleanup status file
 
   $ echo "mq=" >> $HGRCPATH
   $ hg up -C 3
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo fooagain >> bar
   $ hg ci -mf
   $ hg qimport -r tip:2
 
 applied patches before strip
 
   $ hg qapplied
   d
   e
   f
 
 stripping revision in queue
 
   $ hg strip 3
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
 
 applied patches after stripping rev in queue
 
   $ hg qapplied
   d
 
 stripping ancestor of queue
 
   $ hg strip 1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
 
 applied patches after stripping ancestor of queue
 
   $ hg qapplied
 
 Verify strip protects against stripping wc parent when there are uncommitted mods
 
   $ echo b > b
   $ echo bb > bar
   $ hg add b
   $ hg ci -m 'b'
   $ hg log --graph
   @  changeset:   1:76dcf9fab855
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ hg up 0
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo c > bar
   $ hg up -t false
   merging bar
   merging bar failed!
   1 files updated, 0 files merged, 0 files removed, 1 files unresolved
   use 'hg resolve' to retry unresolved file merges
   [1]
   $ hg sum
   parent: 1:76dcf9fab855 tip
    b
   branch: default
   commit: 1 modified, 1 unknown, 1 unresolved
   update: (current)
   phases: 2 draft
   mq:     3 unapplied
 
   $ hg log --graph
   @  changeset:   1:76dcf9fab855
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   %  changeset:   0:9ab35a2d17cb
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ echo c > b
   $ hg strip tip
   abort: uncommitted changes
   [20]
   $ hg strip tip --keep
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   $ hg log --graph
   @  changeset:   0:9ab35a2d17cb
      tag:         tip
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ hg status
   M bar
   ? b
   ? bar.orig
 
   $ rm bar.orig
   $ hg sum
   parent: 0:9ab35a2d17cb tip
    a
   branch: default
   commit: 1 modified, 1 unknown
   update: (current)
   phases: 1 draft
   mq:     3 unapplied
 
 Strip adds, removes, modifies with --keep
 
   $ touch b
   $ hg add b
   $ hg commit -mb
   $ touch c
 
 ... with a clean working dir
 
   $ hg add c
   $ hg rm bar
   $ hg commit -mc
   $ hg status
   $ hg strip --keep tip
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   $ hg status
   ! bar
   ? c
 
 ... with a dirty working dir
 
   $ hg add c
   $ hg rm bar
   $ hg commit -mc
   $ hg status
   $ echo b > b
   $ echo d > d
   $ hg strip --keep tip
   saved backup bundle to $TESTTMP/test/.hg/strip-backup/*-backup.hg (glob)
   $ hg status
   M b
   ! bar
   ? c
   ? d
 
 ... after updating the dirstate
   $ hg add c
   $ hg commit -mc
   $ hg rm c
   $ hg commit -mc
   $ hg strip --keep '.^' -q
   $ cd ..
 
 stripping many nodes on a complex graph (issue3299)
 
   $ hg init issue3299
   $ cd issue3299
   $ hg debugbuilddag '@a.:a@b.:b.:x<a@a.:a<b@b.:b<a@a.:a'
   $ hg strip 'not ancestors(x)'
   saved backup bundle to $TESTTMP/issue3299/.hg/strip-backup/*-backup.hg (glob)
 
 test hg strip -B bookmark
 
   $ cd ..
   $ hg init bookmarks
   $ cd bookmarks
   $ hg debugbuilddag '..<2.*1/2:m<2+3:c<m+3:a<2.:b<m+2:d<2.:e<m+1:f'
   $ hg bookmark -r 'a' 'todelete'
   $ hg bookmark -r 'b' 'B'
   $ hg bookmark -r 'b' 'nostrip'
   $ hg bookmark -r 'c' 'delete'
   $ hg bookmark -r 'd' 'multipledelete1'
   $ hg bookmark -r 'e' 'multipledelete2'
   $ hg bookmark -r 'f' 'singlenode1'
   $ hg bookmark -r 'f' 'singlenode2'
   $ hg up -C todelete
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (activating bookmark todelete)
   $ hg strip -B nostrip
   bookmark 'nostrip' deleted
   abort: empty revision set
   [255]
   $ hg strip -B todelete
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/bookmarks/.hg/strip-backup/*-backup.hg (glob)
   bookmark 'todelete' deleted
   $ hg id -ir dcbb326fdec2
   abort: unknown revision 'dcbb326fdec2'
   [255]
   $ hg id -ir d62d843c9a01
   d62d843c9a01
   $ hg bookmarks
      B                         9:ff43616e5d0f
      delete                    6:2702dd0c91e7
      multipledelete1           11:e46a4836065c
      multipledelete2           12:b4594d867745
      singlenode1               13:43227190fef8
      singlenode2               13:43227190fef8
   $ hg strip -B multipledelete1 -B multipledelete2
   saved backup bundle to $TESTTMP/bookmarks/.hg/strip-backup/e46a4836065c-89ec65c2-backup.hg
   bookmark 'multipledelete1' deleted
   bookmark 'multipledelete2' deleted
   $ hg id -ir e46a4836065c
   abort: unknown revision 'e46a4836065c'
   [255]
   $ hg id -ir b4594d867745
   abort: unknown revision 'b4594d867745'
   [255]
   $ hg strip -B singlenode1 -B singlenode2
   saved backup bundle to $TESTTMP/bookmarks/.hg/strip-backup/43227190fef8-8da858f2-backup.hg
   bookmark 'singlenode1' deleted
   bookmark 'singlenode2' deleted
   $ hg id -ir 43227190fef8
   abort: unknown revision '43227190fef8'
   [255]
   $ hg strip -B unknownbookmark
   abort: bookmark 'unknownbookmark' not found
   [255]
   $ hg strip -B unknownbookmark1 -B unknownbookmark2
   abort: bookmark 'unknownbookmark1,unknownbookmark2' not found
   [255]
   $ hg strip -B delete -B unknownbookmark
   abort: bookmark 'unknownbookmark' not found
   [255]
   $ hg strip -B delete
   saved backup bundle to $TESTTMP/bookmarks/.hg/strip-backup/*-backup.hg (glob)
   bookmark 'delete' deleted
   $ hg id -ir 6:2702dd0c91e7
   abort: unknown revision '2702dd0c91e7'
   [255]
   $ hg update B
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (activating bookmark B)
   $ echo a > a
   $ hg add a
   $ hg strip -B B
   abort: uncommitted changes
   [20]
   $ hg bookmarks
    * B                         6:ff43616e5d0f
 
 Make sure no one adds back a -b option:
 
   $ hg strip -b tip
   hg debugstrip: option -b not recognized
   hg debugstrip [-k] [-f] [-B bookmark] [-r] REV...
   
   strip changesets and all their descendants from the repository
   
   options ([+] can be repeated):
   
    -r --rev REV [+]           strip specified revision (optional, can specify
                               revisions without this option)
    -f --force                 force removal of changesets, discard uncommitted
                               changes (no backup)
       --no-backup             do not save backup bundle
    -k --keep                  do not modify working directory during strip
    -B --bookmark BOOKMARK [+] remove revs only reachable from given bookmark
       --mq                    operate on patch repository
   
   (use 'hg debugstrip -h' to show more help)
-  [255]
+  [10]
 
   $ cd ..
 
 Verify bundles don't get overwritten:
 
   $ hg init doublebundle
   $ cd doublebundle
   $ touch a
   $ hg commit -Aqm a
   $ touch b
   $ hg commit -Aqm b
   $ hg strip -r 0
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/doublebundle/.hg/strip-backup/3903775176ed-e68910bd-backup.hg
   $ ls .hg/strip-backup
   3903775176ed-e68910bd-backup.hg
 #if repobundlerepo
   $ hg pull -q -r 3903775176ed .hg/strip-backup/3903775176ed-e68910bd-backup.hg
   $ hg strip -r 0
   saved backup bundle to $TESTTMP/doublebundle/.hg/strip-backup/3903775176ed-54390173-backup.hg
   $ ls .hg/strip-backup
   3903775176ed-54390173-backup.hg
   3903775176ed-e68910bd-backup.hg
 #endif
   $ cd ..
 
 Test that we only bundle the stripped changesets (issue4736)
 ------------------------------------------------------------
 
 initialization (previous repo is empty anyway)
 
   $ hg init issue4736
   $ cd issue4736
   $ echo a > a
   $ hg add a
   $ hg commit -m commitA
   $ echo b > b
   $ hg add b
   $ hg commit -m commitB
   $ echo c > c
   $ hg add c
   $ hg commit -m commitC
   $ hg up 'desc(commitB)'
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo d > d
   $ hg add d
   $ hg commit -m commitD
   created new head
   $ hg up 'desc(commitC)'
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg merge 'desc(commitD)'
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg ci -m 'mergeCD'
   $ hg log -G
   @    changeset:   4:d8db9d137221
   |\   tag:         tip
   | |  parent:      2:5c51d8d6557d
   | |  parent:      3:6625a5168474
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     mergeCD
   | |
   | o  changeset:   3:6625a5168474
   | |  parent:      1:eca11cf91c71
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     commitD
   | |
   o |  changeset:   2:5c51d8d6557d
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     commitC
   |
   o  changeset:   1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
 Check bundle behavior:
 
   $ hg bundle -r 'desc(mergeCD)' --base 'desc(commitC)' ../issue4736.hg
   2 changesets found
 #if repobundlerepo
   $ hg log -r 'bundle()' -R ../issue4736.hg
   changeset:   3:6625a5168474
   parent:      1:eca11cf91c71
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     commitD
   
   changeset:   4:d8db9d137221
   tag:         tip
   parent:      2:5c51d8d6557d
   parent:      3:6625a5168474
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     mergeCD
   
 #endif
 
 check strip behavior
 
   $ hg --config extensions.strip= strip 'desc(commitD)' --debug
   resolving manifests
    branchmerge: False, force: True, partial: False
    ancestor: d8db9d137221+, local: d8db9d137221+, remote: eca11cf91c71
    c: other deleted -> r
   removing c
    d: other deleted -> r
   removing d
   starting 4 threads for background file closing (?)
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 changesets found
   list of changesets:
   6625a516847449b6f0fa3737b9ba56e9f0f3032c
   d8db9d1372214336d2b5570f20ee468d2c72fa8b
   bundle2-output-bundle: "HG20", (1 params) 3 parts total
   bundle2-output-part: "changegroup" (params: 1 mandatory 1 advisory) streamed payload
   bundle2-output-part: "cache:rev-branch-cache" (advisory) streamed payload
   bundle2-output-part: "phase-heads" 24 bytes payload
   saved backup bundle to $TESTTMP/issue4736/.hg/strip-backup/6625a5168474-345bb43d-backup.hg
   updating the branch cache
   invalid branch cache (served): tip differs
   $ hg log -G
   o  changeset:   2:5c51d8d6557d
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitC
   |
   @  changeset:   1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
 strip backup content
 
 #if repobundlerepo
   $ hg log -r 'bundle()' -R .hg/strip-backup/6625a5168474-*-backup.hg
   changeset:   3:6625a5168474
   parent:      1:eca11cf91c71
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     commitD
   
   changeset:   4:d8db9d137221
   tag:         tip
   parent:      2:5c51d8d6557d
   parent:      3:6625a5168474
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     mergeCD
   
 
 #endif
 
 Check that the phase cache is properly invalidated after a strip with bookmark.
 
   $ cat > ../stripstalephasecache.py << EOF
   > from mercurial import extensions, localrepo
   > def transactioncallback(orig, repo, desc, *args, **kwargs):
   >     def test(transaction):
   >         # observe cache inconsistency
   >         try:
   >             [repo.changelog.node(r) for r in repo.revs(b"not public()")]
   >         except IndexError:
   >             repo.ui.status(b"Index error!\n")
   >     transaction = orig(repo, desc, *args, **kwargs)
   >     # warm up the phase cache
   >     list(repo.revs(b"not public()"))
   >     if desc != b'strip':
   >          transaction.addpostclose(b"phase invalidation test", test)
   >     return transaction
   > def extsetup(ui):
   >     extensions.wrapfunction(localrepo.localrepository, b"transaction",
   >                             transactioncallback)
   > EOF
   $ hg up -C 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo k > k
   $ hg add k
   $ hg commit -m commitK
   $ echo l > l
   $ hg add l
   $ hg commit -m commitL
   $ hg book -r tip blah
   $ hg strip ".^" --config extensions.crash=$TESTTMP/stripstalephasecache.py
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/issue4736/.hg/strip-backup/8f0b4384875c-4fa10deb-backup.hg
   $ hg up -C 1
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
 
 Error during post-close callback of the strip transaction
 (They should be gracefully handled and reported)
 
   $ cat > ../crashstrip.py << EOF
   > from mercurial import error
   > def reposetup(ui, repo):
   >     class crashstriprepo(repo.__class__):
   >         def transaction(self, desc, *args, **kwargs):
   >             tr = super(crashstriprepo, self).transaction(desc, *args, **kwargs)
   >             if desc == b'strip':
   >                 def crash(tra): raise error.Abort(b'boom')
   >                 tr.addpostclose(b'crash', crash)
   >             return tr
   >     repo.__class__ = crashstriprepo
   > EOF
   $ hg strip tip --config extensions.crash=$TESTTMP/crashstrip.py
   saved backup bundle to $TESTTMP/issue4736/.hg/strip-backup/5c51d8d6557d-70daef06-backup.hg
   strip failed, backup bundle stored in '$TESTTMP/issue4736/.hg/strip-backup/5c51d8d6557d-70daef06-backup.hg'
   abort: boom
   [255]
 
 test stripping a working directory parent doesn't switch named branches
 
   $ hg log -G
   @  changeset:   1:eca11cf91c71
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
   $ hg branch new-branch
   marked working directory as branch new-branch
   (branches are permanent and global, did you want a bookmark?)
   $ hg ci -m "start new branch"
   $ echo 'foo' > foo.txt
   $ hg ci -Aqm foo
   $ hg up default
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo 'bar' > bar.txt
   $ hg ci -Aqm bar
   $ hg up new-branch
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg merge default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg log -G
   @  changeset:   4:35358f982181
   |  tag:         tip
   |  parent:      1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     bar
   |
   | @  changeset:   3:f62c6c09b707
   | |  branch:      new-branch
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     foo
   | |
   | o  changeset:   2:b1d33a8cadd9
   |/   branch:      new-branch
   |    user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     start new branch
   |
   o  changeset:   1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
   $ hg strip --force -r 35358f982181
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/issue4736/.hg/strip-backup/35358f982181-50d992d4-backup.hg
   $ hg log -G
   @  changeset:   3:f62c6c09b707
   |  branch:      new-branch
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     foo
   |
   o  changeset:   2:b1d33a8cadd9
   |  branch:      new-branch
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     start new branch
   |
   o  changeset:   1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
   $ hg up default
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo 'bar' > bar.txt
   $ hg ci -Aqm bar
   $ hg up new-branch
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg merge default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg ci -m merge
   $ hg log -G
   @    changeset:   5:4cf5e92caec2
   |\   branch:      new-branch
   | |  tag:         tip
   | |  parent:      3:f62c6c09b707
   | |  parent:      4:35358f982181
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     merge
   | |
   | o  changeset:   4:35358f982181
   | |  parent:      1:eca11cf91c71
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     bar
   | |
   o |  changeset:   3:f62c6c09b707
   | |  branch:      new-branch
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     foo
   | |
   o |  changeset:   2:b1d33a8cadd9
   |/   branch:      new-branch
   |    user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     start new branch
   |
   o  changeset:   1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
   $ hg strip -r 35358f982181
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/issue4736/.hg/strip-backup/35358f982181-a6f020aa-backup.hg
   $ hg log -G
   @  changeset:   3:f62c6c09b707
   |  branch:      new-branch
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     foo
   |
   o  changeset:   2:b1d33a8cadd9
   |  branch:      new-branch
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     start new branch
   |
   o  changeset:   1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
 stripping a set containing a merge properly reset file content, including items on other branches
 
 The added file is moved to unknown, which is the behavior we have been seeing for other `hg strip --keep` call.
 
 stripping a set containing a merge properly reset file content, including items on other branches
 
 The added file is moved to unknown, which is the behavior we have been seeing for other `hg strip --keep` call.
 
   $ hg unbundle -u $TESTTMP/issue4736/.hg/strip-backup/35358f982181-a6f020aa-backup.hg
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 1 changes to 1 files
   new changesets 35358f982181:4cf5e92caec2 (2 drafts)
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg id
   4cf5e92caec2 (new-branch) tip
   $ hg status --rev "f62c6c09b707"
   A bar.txt
   $ hg diff --rev "f62c6c09b707"
   diff -r f62c6c09b707 bar.txt
   --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
   +++ b/bar.txt	Thu Jan 01 00:00:00 1970 +0000
   @@ -0,0 +1,1 @@
   +bar
   $ hg log -G -v --rev 35358f982181:: --patch
   @    changeset:   5:4cf5e92caec2
   |\   branch:      new-branch
   | ~  tag:         tip
   |    parent:      3:f62c6c09b707
   |    parent:      4:35358f982181
   |    user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    description:
   |    merge
   |
   |
   |    diff -r f62c6c09b707 -r 4cf5e92caec2 bar.txt
   |    --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
   |    +++ b/bar.txt	Thu Jan 01 00:00:00 1970 +0000
   |    @@ -0,0 +1,1 @@
   |    +bar
   |
   o  changeset:   4:35358f982181
   |  parent:      1:eca11cf91c71
   ~  user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      files:       bar.txt
      description:
      bar
   
   
      diff -r eca11cf91c71 -r 35358f982181 bar.txt
      --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
      +++ b/bar.txt	Thu Jan 01 00:00:00 1970 +0000
      @@ -0,0 +1,1 @@
      +bar
   
 
   $ hg strip -k -r 35358f982181
   saved backup bundle to $TESTTMP/issue4736/.hg/strip-backup/35358f982181-a6f020aa-backup.hg
   $ hg log -G
   @  changeset:   3:f62c6c09b707
   |  branch:      new-branch
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     foo
   |
   o  changeset:   2:b1d33a8cadd9
   |  branch:      new-branch
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     start new branch
   |
   o  changeset:   1:eca11cf91c71
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     commitB
   |
   o  changeset:   0:105141ef12d0
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     commitA
   
 
   $ hg status -A
   ? bar.txt
   C a
   C b
   C foo.txt
   $ cat bar.txt
   bar
 
 Use delayedstrip to strip inside a transaction
 
   $ cd $TESTTMP
   $ hg init delayedstrip
   $ cd delayedstrip
   $ hg debugdrawdag <<'EOS'
   >   D
   >   |
   >   C F H    # Commit on top of "I",
   >   | |/|    # Strip B+D+I+E+G+H+Z
   > I B E G
   >  \|/
   >   A   Z
   > EOS
   $ cp -R . ../scmutilcleanup
 
   $ hg up -C I
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo 3 >> I
   $ cat > $TESTTMP/delayedstrip.py <<EOF
   > from __future__ import absolute_import
   > from mercurial import commands, registrar, repair
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'testdelayedstrip')
   > def testdelayedstrip(ui, repo):
   >     def getnodes(expr):
   >         return [repo.changelog.node(r) for r in repo.revs(expr)]
   >     with repo.wlock():
   >         with repo.lock():
   >             with repo.transaction(b'delayedstrip'):
   >                 repair.delayedstrip(ui, repo, getnodes(b'B+I+Z+D+E'), b'J')
   >                 repair.delayedstrip(ui, repo, getnodes(b'G+H+Z'), b'I')
   >                 commands.commit(ui, repo, message=b'J', date=b'0 0')
   > EOF
   $ hg testdelayedstrip --config extensions.t=$TESTTMP/delayedstrip.py
   warning: orphaned descendants detected, not stripping 08ebfeb61bac, 112478962961, 7fb047a69f22
   saved backup bundle to $TESTTMP/delayedstrip/.hg/strip-backup/f585351a92f8-17475721-I.hg
 
   $ hg log -G -T '{rev}:{node|short} {desc}' -r 'sort(all(), topo)'
   @  6:2f2d51af6205 J
   |
   o  3:08ebfeb61bac I
   |
   | o  5:64a8289d2492 F
   | |
   | o  2:7fb047a69f22 E
   |/
   | o  4:26805aba1e60 C
   | |
   | o  1:112478962961 B
   |/
   o  0:426bada5c675 A
   
 Test high-level scmutil.cleanupnodes API
 
   $ cd $TESTTMP/scmutilcleanup
   $ hg debugdrawdag <<'EOS'
   >   D2  F2  G2   # D2, F2, G2 are replacements for D, F, G
   >   |   |   |
   >   C   H   G
   > EOS
   $ for i in B C D F G I Z; do
   >     hg bookmark -i -r $i b-$i
   > done
   $ hg bookmark -i -r E 'b-F@divergent1'
   $ hg bookmark -i -r H 'b-F@divergent2'
   $ hg bookmark -i -r G 'b-F@divergent3'
   $ cp -R . ../scmutilcleanup.obsstore
 
   $ cat > $TESTTMP/scmutilcleanup.py <<EOF
   > from mercurial import registrar, scmutil
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'testnodescleanup')
   > def testnodescleanup(ui, repo):
   >     def nodes(expr):
   >         return [repo.changelog.node(r) for r in repo.revs(expr)]
   >     def node(expr):
   >         return nodes(expr)[0]
   >     with repo.wlock():
   >         with repo.lock():
   >             with repo.transaction(b'delayedstrip'):
   >                 mapping = {node(b'F'): [node(b'F2')],
   >                            node(b'D'): [node(b'D2')],
   >                            node(b'G'): [node(b'G2')]}
   >                 scmutil.cleanupnodes(repo, mapping, b'replace')
   >                 scmutil.cleanupnodes(repo, nodes(b'((B::)+I+Z)-D2-obsolete()'),
   >                                      b'replace')
   > EOF
   $ hg testnodescleanup --config extensions.t=$TESTTMP/scmutilcleanup.py
   warning: orphaned descendants detected, not stripping 112478962961, 1fc8102cda62, 26805aba1e60
   saved backup bundle to $TESTTMP/scmutilcleanup/.hg/strip-backup/f585351a92f8-73fb7c03-replace.hg
 
   $ hg log -G -T '{rev}:{node|short} {desc} {bookmarks}' -r 'sort(all(), topo)'
   o  8:1473d4b996d1 G2 b-F@divergent3 b-G
   |
   | o  7:d11b3456a873 F2 b-F
   | |
   | o  5:5cb05ba470a7 H
   |/|
   | o  3:7fb047a69f22 E b-F@divergent1
   | |
   | | o  6:7c78f703e465 D2 b-D
   | | |
   | | o  4:26805aba1e60 C
   | | |
   | | o  2:112478962961 B
   | |/
   o |  1:1fc8102cda62 G
    /
   o  0:426bada5c675 A b-B b-C b-I
   
   $ hg bookmark
      b-B                       0:426bada5c675
      b-C                       0:426bada5c675
      b-D                       6:7c78f703e465
      b-F                       7:d11b3456a873
      b-F@divergent1            3:7fb047a69f22
      b-F@divergent3            8:1473d4b996d1
      b-G                       8:1473d4b996d1
      b-I                       0:426bada5c675
      b-Z                       -1:000000000000
 
 Test the above using obsstore "by the way". Not directly related to strip, but
 we have reusable code here
 
   $ cd $TESTTMP/scmutilcleanup.obsstore
   $ cat >> .hg/hgrc <<EOF
   > [experimental]
   > evolution=true
   > evolution.track-operation=1
   > EOF
 
   $ hg testnodescleanup --config extensions.t=$TESTTMP/scmutilcleanup.py
   4 new orphan changesets
 
   $ rm .hg/localtags
   $ hg log -G -T '{rev}:{node|short} {desc} {bookmarks}' -r 'sort(all(), topo)'
   *  12:1473d4b996d1 G2 b-F@divergent3 b-G
   |
   | *  11:d11b3456a873 F2 b-F
   | |
   | *  8:5cb05ba470a7 H
   |/|
   | o  4:7fb047a69f22 E b-F@divergent1
   | |
   | | *  10:7c78f703e465 D2 b-D
   | | |
   | | x  6:26805aba1e60 C
   | | |
   | | x  3:112478962961 B
   | |/
   x |  1:1fc8102cda62 G
    /
   o  0:426bada5c675 A b-B b-C b-I
   
   $ hg debugobsolete
   1fc8102cda6204549f031015641606ccf5513ec3 1473d4b996d1d1b121de6b39fab6a04fbf9d873e 0 (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '13', 'operation': 'replace', 'user': 'test'}
   64a8289d249234b9886244d379f15e6b650b28e3 d11b3456a873daec7c7bc53e5622e8df6d741bd2 0 (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '13', 'operation': 'replace', 'user': 'test'}
   f585351a92f85104bff7c284233c338b10eb1df7 7c78f703e465d73102cc8780667ce269c5208a40 0 (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '9', 'operation': 'replace', 'user': 'test'}
   48b9aae0607f43ff110d84e6883c151942add5ab 0 {0000000000000000000000000000000000000000} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'replace', 'user': 'test'}
   112478962961147124edd43549aedd1a335e44bf 0 {426bada5c67598ca65036d57d9e4b64b0c1ce7a0} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'replace', 'user': 'test'}
   08ebfeb61bac6e3f12079de774d285a0d6689eba 0 {426bada5c67598ca65036d57d9e4b64b0c1ce7a0} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'replace', 'user': 'test'}
   26805aba1e600a82e93661149f2313866a221a7b 0 {112478962961147124edd43549aedd1a335e44bf} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'replace', 'user': 'test'}
   $ cd ..
 
 Test that obsmarkers are restored even when not using generaldelta
 
   $ hg --config format.usegeneraldelta=no init issue5678
   $ cd issue5678
   $ cat >> .hg/hgrc <<EOF
   > [experimental]
   > evolution=true
   > EOF
   $ echo a > a
   $ hg ci -Aqm a
   $ hg ci --amend -m a2
   $ hg debugobsolete
   cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 489bac576828490c0bb8d45eac9e5e172e4ec0a8 0 (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '1', 'operation': 'amend', 'user': 'test'}
   $ hg strip .
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/issue5678/.hg/strip-backup/489bac576828-bef27e14-backup.hg
   $ hg unbundle -q .hg/strip-backup/*
   $ hg debugobsolete
   cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 489bac576828490c0bb8d45eac9e5e172e4ec0a8 0 (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '1', 'operation': 'amend', 'user': 'test'}
   $ cd ..