py3: make sure the first argument of time.strftime() is str

time.strftime() does not accepts bytes as its first argument on py3.

Differential Revision: https://phab.mercurial-scm.org/D1559

hgext/bugzilla.py

@@ -1,1125 +1,1125 b''
 # bugzilla.py - bugzilla integration for mercurial
 #
 # Copyright 2006 Vadim Gelfer <[e-mail]>
 # Copyright 2011-4 Jim Hague <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 '''hooks for integrating with the Bugzilla bug tracker
 
 This hook extension adds comments on bugs in Bugzilla when changesets
 that refer to bugs by Bugzilla ID are seen. The comment is formatted using
 the Mercurial template mechanism.
 
 The bug references can optionally include an update for Bugzilla of the
 hours spent working on the bug. Bugs can also be marked fixed.
 
 Four basic modes of access to Bugzilla are provided:
 
 1. Access via the Bugzilla REST-API. Requires bugzilla 5.0 or later.
 
 2. Access via the Bugzilla XMLRPC interface. Requires Bugzilla 3.4 or later.
 
 3. Check data via the Bugzilla XMLRPC interface and submit bug change
    via email to Bugzilla email interface. Requires Bugzilla 3.4 or later.
 
 4. Writing directly to the Bugzilla database. Only Bugzilla installations
    using MySQL are supported. Requires Python MySQLdb.
 
 Writing directly to the database is susceptible to schema changes, and
 relies on a Bugzilla contrib script to send out bug change
 notification emails. This script runs as the user running Mercurial,
 must be run on the host with the Bugzilla install, and requires
 permission to read Bugzilla configuration details and the necessary
 MySQL user and password to have full access rights to the Bugzilla
 database. For these reasons this access mode is now considered
 deprecated, and will not be updated for new Bugzilla versions going
 forward. Only adding comments is supported in this access mode.
 
 Access via XMLRPC needs a Bugzilla username and password to be specified
 in the configuration. Comments are added under that username. Since the
 configuration must be readable by all Mercurial users, it is recommended
 that the rights of that user are restricted in Bugzilla to the minimum
 necessary to add comments. Marking bugs fixed requires Bugzilla 4.0 and later.
 
 Access via XMLRPC/email uses XMLRPC to query Bugzilla, but sends
 email to the Bugzilla email interface to submit comments to bugs.
 The From: address in the email is set to the email address of the Mercurial
 user, so the comment appears to come from the Mercurial user. In the event
 that the Mercurial user email is not recognized by Bugzilla as a Bugzilla
 user, the email associated with the Bugzilla username used to log into
 Bugzilla is used instead as the source of the comment. Marking bugs fixed
 works on all supported Bugzilla versions.
 
 Access via the REST-API needs either a Bugzilla username and password
 or an apikey specified in the configuration. Comments are made under
 the given username or the user associated with the apikey in Bugzilla.
 
 Configuration items common to all access modes:
 
 bugzilla.version
   The access type to use. Values recognized are:
 
   :``restapi``:      Bugzilla REST-API, Bugzilla 5.0 and later.
   :``xmlrpc``:       Bugzilla XMLRPC interface.
   :``xmlrpc+email``: Bugzilla XMLRPC and email interfaces.
   :``3.0``:          MySQL access, Bugzilla 3.0 and later.
   :``2.18``:         MySQL access, Bugzilla 2.18 and up to but not
                      including 3.0.
   :``2.16``:         MySQL access, Bugzilla 2.16 and up to but not
                      including 2.18.
 
 bugzilla.regexp
   Regular expression to match bug IDs for update in changeset commit message.
   It must contain one "()" named group ``<ids>`` containing the bug
   IDs separated by non-digit characters. It may also contain
   a named group ``<hours>`` with a floating-point number giving the
   hours worked on the bug. If no named groups are present, the first
   "()" group is assumed to contain the bug IDs, and work time is not
   updated. The default expression matches ``Bug 1234``, ``Bug no. 1234``,
   ``Bug number 1234``, ``Bugs 1234,5678``, ``Bug 1234 and 5678`` and
   variations thereof, followed by an hours number prefixed by ``h`` or
   ``hours``, e.g. ``hours 1.5``. Matching is case insensitive.
 
 bugzilla.fixregexp
   Regular expression to match bug IDs for marking fixed in changeset
   commit message. This must contain a "()" named group ``<ids>` containing
   the bug IDs separated by non-digit characters. It may also contain
   a named group ``<hours>`` with a floating-point number giving the
   hours worked on the bug. If no named groups are present, the first
   "()" group is assumed to contain the bug IDs, and work time is not
   updated. The default expression matches ``Fixes 1234``, ``Fixes bug 1234``,
   ``Fixes bugs 1234,5678``, ``Fixes 1234 and 5678`` and
   variations thereof, followed by an hours number prefixed by ``h`` or
   ``hours``, e.g. ``hours 1.5``. Matching is case insensitive.
 
 bugzilla.fixstatus
   The status to set a bug to when marking fixed. Default ``RESOLVED``.
 
 bugzilla.fixresolution
   The resolution to set a bug to when marking fixed. Default ``FIXED``.
 
 bugzilla.style
   The style file to use when formatting comments.
 
 bugzilla.template
   Template to use when formatting comments. Overrides style if
   specified. In addition to the usual Mercurial keywords, the
   extension specifies:
 
   :``{bug}``:     The Bugzilla bug ID.
   :``{root}``:    The full pathname of the Mercurial repository.
   :``{webroot}``: Stripped pathname of the Mercurial repository.
   :``{hgweb}``:   Base URL for browsing Mercurial repositories.
 
   Default ``changeset {node|short} in repo {root} refers to bug
   {bug}.\\ndetails:\\n\\t{desc|tabindent}``
 
 bugzilla.strip
   The number of path separator characters to strip from the front of
   the Mercurial repository path (``{root}`` in templates) to produce
   ``{webroot}``. For example, a repository with ``{root}``
   ``/var/local/my-project`` with a strip of 2 gives a value for
   ``{webroot}`` of ``my-project``. Default 0.
 
 web.baseurl
   Base URL for browsing Mercurial repositories. Referenced from
   templates as ``{hgweb}``.
 
 Configuration items common to XMLRPC+email and MySQL access modes:
 
 bugzilla.usermap
   Path of file containing Mercurial committer email to Bugzilla user email
   mappings. If specified, the file should contain one mapping per
   line::
 
     committer = Bugzilla user
 
   See also the ``[usermap]`` section.
 
 The ``[usermap]`` section is used to specify mappings of Mercurial
 committer email to Bugzilla user email. See also ``bugzilla.usermap``.
 Contains entries of the form ``committer = Bugzilla user``.
 
 XMLRPC and REST-API access mode configuration:
 
 bugzilla.bzurl
   The base URL for the Bugzilla installation.
   Default ``http://localhost/bugzilla``.
 
 bugzilla.user
   The username to use to log into Bugzilla via XMLRPC. Default
   ``bugs``.
 
 bugzilla.password
   The password for Bugzilla login.
 
 REST-API access mode uses the options listed above as well as:
 
 bugzilla.apikey
   An apikey generated on the Bugzilla instance for api access.
   Using an apikey removes the need to store the user and password
   options.
 
 XMLRPC+email access mode uses the XMLRPC access mode configuration items,
 and also:
 
 bugzilla.bzemail
   The Bugzilla email address.
 
 In addition, the Mercurial email settings must be configured. See the
 documentation in hgrc(5), sections ``[email]`` and ``[smtp]``.
 
 MySQL access mode configuration:
 
 bugzilla.host
   Hostname of the MySQL server holding the Bugzilla database.
   Default ``localhost``.
 
 bugzilla.db
   Name of the Bugzilla database in MySQL. Default ``bugs``.
 
 bugzilla.user
   Username to use to access MySQL server. Default ``bugs``.
 
 bugzilla.password
   Password to use to access MySQL server.
 
 bugzilla.timeout
   Database connection timeout (seconds). Default 5.
 
 bugzilla.bzuser
   Fallback Bugzilla user name to record comments with, if changeset
   committer cannot be found as a Bugzilla user.
 
 bugzilla.bzdir
    Bugzilla install directory. Used by default notify. Default
    ``/var/www/html/bugzilla``.
 
 bugzilla.notify
   The command to run to get Bugzilla to send bug change notification
   emails. Substitutes from a map with 3 keys, ``bzdir``, ``id`` (bug
   id) and ``user`` (committer bugzilla email). Default depends on
   version; from 2.18 it is "cd %(bzdir)s && perl -T
   contrib/sendbugmail.pl %(id)s %(user)s".
 
 Activating the extension::
 
     [extensions]
     bugzilla =
 
     [hooks]
     # run bugzilla hook on every change pulled or pushed in here
     incoming.bugzilla = python:hgext.bugzilla.hook
 
 Example configurations:
 
 XMLRPC example configuration. This uses the Bugzilla at
 ``http://my-project.org/bugzilla``, logging in as user
 ``[e-mail]`` with password ``plugh``. It is used with a
 collection of Mercurial repositories in ``/var/local/hg/repos/``,
 with a web interface at ``http://my-project.org/hg``. ::
 
     [bugzilla]
     bzurl=http://my-project.org/bugzilla
     user=[e-mail]
     password=plugh
     version=xmlrpc
     template=Changeset {node|short} in {root|basename}.
              {hgweb}/{webroot}/rev/{node|short}\\n
              {desc}\\n
     strip=5
 
     [web]
     baseurl=http://my-project.org/hg
 
 XMLRPC+email example configuration. This uses the Bugzilla at
 ``http://my-project.org/bugzilla``, logging in as user
 ``[e-mail]`` with password ``plugh``. It is used with a
 collection of Mercurial repositories in ``/var/local/hg/repos/``,
 with a web interface at ``http://my-project.org/hg``. Bug comments
 are sent to the Bugzilla email address
 ``[e-mail]``. ::
 
     [bugzilla]
     bzurl=http://my-project.org/bugzilla
     user=[e-mail]
     password=plugh
     version=xmlrpc+email
     bzemail=[e-mail]
     template=Changeset {node|short} in {root|basename}.
              {hgweb}/{webroot}/rev/{node|short}\\n
              {desc}\\n
     strip=5
 
     [web]
     baseurl=http://my-project.org/hg
 
     [usermap]
     [e-mail]=[e-mail]
 
 MySQL example configuration. This has a local Bugzilla 3.2 installation
 in ``/opt/bugzilla-3.2``. The MySQL database is on ``localhost``,
 the Bugzilla database name is ``bugs`` and MySQL is
 accessed with MySQL username ``bugs`` password ``XYZZY``. It is used
 with a collection of Mercurial repositories in ``/var/local/hg/repos/``,
 with a web interface at ``http://my-project.org/hg``. ::
 
     [bugzilla]
     host=localhost
     password=XYZZY
     version=3.0
     bzuser=[e-mail]
     bzdir=/opt/bugzilla-3.2
     template=Changeset {node|short} in {root|basename}.
              {hgweb}/{webroot}/rev/{node|short}\\n
              {desc}\\n
     strip=5
 
     [web]
     baseurl=http://my-project.org/hg
 
     [usermap]
     [e-mail]=[e-mail]
 
 All the above add a comment to the Bugzilla bug record of the form::
 
     Changeset 3b16791d6642 in repository-name.
     http://my-project.org/hg/repository-name/rev/3b16791d6642
 
     Changeset commit comment. Bug 1234.
 '''
 
 from __future__ import absolute_import
 
 import json
 import re
 import time
 
 from mercurial.i18n import _
 from mercurial.node import short
 from mercurial import (
     cmdutil,
     error,
     mail,
     registrar,
     url,
     util,
 )
 
 xmlrpclib = util.xmlrpclib
 
 # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
 # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
 # be specifying the version(s) of Mercurial they are tested with, or
 # leave the attribute unspecified.
 testedwith = 'ships-with-hg-core'
 
 configtable = {}
 configitem = registrar.configitem(configtable)
 
 configitem('bugzilla', 'apikey',
     default='',
 )
 configitem('bugzilla', 'bzdir',
     default='/var/www/html/bugzilla',
 )
 configitem('bugzilla', 'bzemail',
     default=None,
 )
 configitem('bugzilla', 'bzurl',
     default='http://localhost/bugzilla/',
 )
 configitem('bugzilla', 'bzuser',
     default=None,
 )
 configitem('bugzilla', 'db',
     default='bugs',
 )
 configitem('bugzilla', 'fixregexp',
     default=(r'fix(?:es)?\s*(?:bugs?\s*)?,?\s*'
              r'(?:nos?\.?|num(?:ber)?s?)?\s*'
              r'(?P<ids>(?:#?\d+\s*(?:,?\s*(?:and)?)?\s*)+)'
              r'\.?\s*(?:h(?:ours?)?\s*(?P<hours>\d*(?:\.\d+)?))?')
 )
 configitem('bugzilla', 'fixresolution',
     default='FIXED',
 )
 configitem('bugzilla', 'fixstatus',
     default='RESOLVED',
 )
 configitem('bugzilla', 'host',
     default='localhost',
 )
 configitem('bugzilla', 'notify',
     default=configitem.dynamicdefault,
 )
 configitem('bugzilla', 'password',
     default=None,
 )
 configitem('bugzilla', 'regexp',
     default=(r'bugs?\s*,?\s*(?:#|nos?\.?|num(?:ber)?s?)?\s*'
              r'(?P<ids>(?:\d+\s*(?:,?\s*(?:and)?)?\s*)+)'
              r'\.?\s*(?:h(?:ours?)?\s*(?P<hours>\d*(?:\.\d+)?))?')
 )
 configitem('bugzilla', 'strip',
     default=0,
 )
 configitem('bugzilla', 'style',
     default=None,
 )
 configitem('bugzilla', 'template',
     default=None,
 )
 configitem('bugzilla', 'timeout',
     default=5,
 )
 configitem('bugzilla', 'user',
     default='bugs',
 )
 configitem('bugzilla', 'usermap',
     default=None,
 )
 configitem('bugzilla', 'version',
     default=None,
 )
 
 class bzaccess(object):
     '''Base class for access to Bugzilla.'''
 
     def __init__(self, ui):
         self.ui = ui
         usermap = self.ui.config('bugzilla', 'usermap')
         if usermap:
             self.ui.readconfig(usermap, sections=['usermap'])
 
     def map_committer(self, user):
         '''map name of committer to Bugzilla user name.'''
         for committer, bzuser in self.ui.configitems('usermap'):
             if committer.lower() == user.lower():
                 return bzuser
         return user
 
     # Methods to be implemented by access classes.
     #
     # 'bugs' is a dict keyed on bug id, where values are a dict holding
     # updates to bug state. Recognized dict keys are:
     #
     # 'hours': Value, float containing work hours to be updated.
     # 'fix':   If key present, bug is to be marked fixed. Value ignored.
 
     def filter_real_bug_ids(self, bugs):
         '''remove bug IDs that do not exist in Bugzilla from bugs.'''
 
     def filter_cset_known_bug_ids(self, node, bugs):
         '''remove bug IDs where node occurs in comment text from bugs.'''
 
     def updatebug(self, bugid, newstate, text, committer):
         '''update the specified bug. Add comment text and set new states.
 
         If possible add the comment as being from the committer of
         the changeset. Otherwise use the default Bugzilla user.
         '''
 
     def notify(self, bugs, committer):
         '''Force sending of Bugzilla notification emails.
 
         Only required if the access method does not trigger notification
         emails automatically.
         '''
 
 # Bugzilla via direct access to MySQL database.
 class bzmysql(bzaccess):
     '''Support for direct MySQL access to Bugzilla.
 
     The earliest Bugzilla version this is tested with is version 2.16.
 
     If your Bugzilla is version 3.4 or above, you are strongly
     recommended to use the XMLRPC access method instead.
     '''
 
     @staticmethod
     def sql_buglist(ids):
         '''return SQL-friendly list of bug ids'''
         return '(' + ','.join(map(str, ids)) + ')'
 
     _MySQLdb = None
 
     def __init__(self, ui):
         try:
             import MySQLdb as mysql
             bzmysql._MySQLdb = mysql
         except ImportError as err:
             raise error.Abort(_('python mysql support not available: %s') % err)
 
         bzaccess.__init__(self, ui)
 
         host = self.ui.config('bugzilla', 'host')
         user = self.ui.config('bugzilla', 'user')
         passwd = self.ui.config('bugzilla', 'password')
         db = self.ui.config('bugzilla', 'db')
         timeout = int(self.ui.config('bugzilla', 'timeout'))
         self.ui.note(_('connecting to %s:%s as %s, password %s\n') %
                      (host, db, user, '*' * len(passwd)))
         self.conn = bzmysql._MySQLdb.connect(host=host,
                                                    user=user, passwd=passwd,
                                                    db=db,
                                                    connect_timeout=timeout)
         self.cursor = self.conn.cursor()
         self.longdesc_id = self.get_longdesc_id()
         self.user_ids = {}
         self.default_notify = "cd %(bzdir)s && ./processmail %(id)s %(user)s"
 
     def run(self, *args, **kwargs):
         '''run a query.'''
         self.ui.note(_('query: %s %s\n') % (args, kwargs))
         try:
             self.cursor.execute(*args, **kwargs)
         except bzmysql._MySQLdb.MySQLError:
             self.ui.note(_('failed query: %s %s\n') % (args, kwargs))
             raise
 
     def get_longdesc_id(self):
         '''get identity of longdesc field'''
         self.run('select fieldid from fielddefs where name = "longdesc"')
         ids = self.cursor.fetchall()
         if len(ids) != 1:
             raise error.Abort(_('unknown database schema'))
         return ids[0][0]
 
     def filter_real_bug_ids(self, bugs):
         '''filter not-existing bugs from set.'''
         self.run('select bug_id from bugs where bug_id in %s' %
                  bzmysql.sql_buglist(bugs.keys()))
         existing = [id for (id,) in self.cursor.fetchall()]
         for id in bugs.keys():
             if id not in existing:
                 self.ui.status(_('bug %d does not exist\n') % id)
                 del bugs[id]
 
     def filter_cset_known_bug_ids(self, node, bugs):
         '''filter bug ids that already refer to this changeset from set.'''
         self.run('''select bug_id from longdescs where
                     bug_id in %s and thetext like "%%%s%%"''' %
                  (bzmysql.sql_buglist(bugs.keys()), short(node)))
         for (id,) in self.cursor.fetchall():
             self.ui.status(_('bug %d already knows about changeset %s\n') %
                            (id, short(node)))
             del bugs[id]
 
     def notify(self, bugs, committer):
         '''tell bugzilla to send mail.'''
         self.ui.status(_('telling bugzilla to send mail:\n'))
         (user, userid) = self.get_bugzilla_user(committer)
         for id in bugs.keys():
             self.ui.status(_('  bug %s\n') % id)
             cmdfmt = self.ui.config('bugzilla', 'notify', self.default_notify)
             bzdir = self.ui.config('bugzilla', 'bzdir')
             try:
                 # Backwards-compatible with old notify string, which
                 # took one string. This will throw with a new format
                 # string.
                 cmd = cmdfmt % id
             except TypeError:
                 cmd = cmdfmt % {'bzdir': bzdir, 'id': id, 'user': user}
             self.ui.note(_('running notify command %s\n') % cmd)
             fp = util.popen('(%s) 2>&1' % cmd)
             out = fp.read()
             ret = fp.close()
             if ret:
                 self.ui.warn(out)
                 raise error.Abort(_('bugzilla notify command %s') %
                                  util.explainexit(ret)[0])
         self.ui.status(_('done\n'))
 
     def get_user_id(self, user):
         '''look up numeric bugzilla user id.'''
         try:
             return self.user_ids[user]
         except KeyError:
             try:
                 userid = int(user)
             except ValueError:
                 self.ui.note(_('looking up user %s\n') % user)
                 self.run('''select userid from profiles
                             where login_name like %s''', user)
                 all = self.cursor.fetchall()
                 if len(all) != 1:
                     raise KeyError(user)
                 userid = int(all[0][0])
             self.user_ids[user] = userid
             return userid
 
     def get_bugzilla_user(self, committer):
         '''See if committer is a registered bugzilla user. Return
         bugzilla username and userid if so. If not, return default
         bugzilla username and userid.'''
         user = self.map_committer(committer)
         try:
             userid = self.get_user_id(user)
         except KeyError:
             try:
                 defaultuser = self.ui.config('bugzilla', 'bzuser')
                 if not defaultuser:
                     raise error.Abort(_('cannot find bugzilla user id for %s') %
                                      user)
                 userid = self.get_user_id(defaultuser)
                 user = defaultuser
             except KeyError:
                 raise error.Abort(_('cannot find bugzilla user id for %s or %s')
                                  % (user, defaultuser))
         return (user, userid)
 
     def updatebug(self, bugid, newstate, text, committer):
         '''update bug state with comment text.
 
         Try adding comment as committer of changeset, otherwise as
         default bugzilla user.'''
         if len(newstate) > 0:
             self.ui.warn(_("Bugzilla/MySQL cannot update bug state\n"))
 
         (user, userid) = self.get_bugzilla_user(committer)
-        now = time.strftime('%Y-%m-%d %H:%M:%S')
+        now = time.strftime(r'%Y-%m-%d %H:%M:%S')
         self.run('''insert into longdescs
                     (bug_id, who, bug_when, thetext)
                     values (%s, %s, %s, %s)''',
                  (bugid, userid, now, text))
         self.run('''insert into bugs_activity (bug_id, who, bug_when, fieldid)
                     values (%s, %s, %s, %s)''',
                  (bugid, userid, now, self.longdesc_id))
         self.conn.commit()
 
 class bzmysql_2_18(bzmysql):
     '''support for bugzilla 2.18 series.'''
 
     def __init__(self, ui):
         bzmysql.__init__(self, ui)
         self.default_notify = \
             "cd %(bzdir)s && perl -T contrib/sendbugmail.pl %(id)s %(user)s"
 
 class bzmysql_3_0(bzmysql_2_18):
     '''support for bugzilla 3.0 series.'''
 
     def __init__(self, ui):
         bzmysql_2_18.__init__(self, ui)
 
     def get_longdesc_id(self):
         '''get identity of longdesc field'''
         self.run('select id from fielddefs where name = "longdesc"')
         ids = self.cursor.fetchall()
         if len(ids) != 1:
             raise error.Abort(_('unknown database schema'))
         return ids[0][0]
 
 # Bugzilla via XMLRPC interface.
 
 class cookietransportrequest(object):
     """A Transport request method that retains cookies over its lifetime.
 
     The regular xmlrpclib transports ignore cookies. Which causes
     a bit of a problem when you need a cookie-based login, as with
     the Bugzilla XMLRPC interface prior to 4.4.3.
 
     So this is a helper for defining a Transport which looks for
     cookies being set in responses and saves them to add to all future
     requests.
     """
 
     # Inspiration drawn from
     # http://blog.godson.in/2010/09/how-to-make-python-xmlrpclib-client.html
     # http://www.itkovian.net/base/transport-class-for-pythons-xml-rpc-lib/
 
     cookies = []
     def send_cookies(self, connection):
         if self.cookies:
             for cookie in self.cookies:
                 connection.putheader("Cookie", cookie)
 
     def request(self, host, handler, request_body, verbose=0):
         self.verbose = verbose
         self.accept_gzip_encoding = False
 
         # issue XML-RPC request
         h = self.make_connection(host)
         if verbose:
             h.set_debuglevel(1)
 
         self.send_request(h, handler, request_body)
         self.send_host(h, host)
         self.send_cookies(h)
         self.send_user_agent(h)
         self.send_content(h, request_body)
 
         # Deal with differences between Python 2.6 and 2.7.
         # In the former h is a HTTP(S). In the latter it's a
         # HTTP(S)Connection. Luckily, the 2.6 implementation of
         # HTTP(S) has an underlying HTTP(S)Connection, so extract
         # that and use it.
         try:
             response = h.getresponse()
         except AttributeError:
             response = h._conn.getresponse()
 
         # Add any cookie definitions to our list.
         for header in response.msg.getallmatchingheaders("Set-Cookie"):
             val = header.split(": ", 1)[1]
             cookie = val.split(";", 1)[0]
             self.cookies.append(cookie)
 
         if response.status != 200:
             raise xmlrpclib.ProtocolError(host + handler, response.status,
                                           response.reason, response.msg.headers)
 
         payload = response.read()
         parser, unmarshaller = self.getparser()
         parser.feed(payload)
         parser.close()
 
         return unmarshaller.close()
 
 # The explicit calls to the underlying xmlrpclib __init__() methods are
 # necessary. The xmlrpclib.Transport classes are old-style classes, and
 # it turns out their __init__() doesn't get called when doing multiple
 # inheritance with a new-style class.
 class cookietransport(cookietransportrequest, xmlrpclib.Transport):
     def __init__(self, use_datetime=0):
         if util.safehasattr(xmlrpclib.Transport, "__init__"):
             xmlrpclib.Transport.__init__(self, use_datetime)
 
 class cookiesafetransport(cookietransportrequest, xmlrpclib.SafeTransport):
     def __init__(self, use_datetime=0):
         if util.safehasattr(xmlrpclib.Transport, "__init__"):
             xmlrpclib.SafeTransport.__init__(self, use_datetime)
 
 class bzxmlrpc(bzaccess):
     """Support for access to Bugzilla via the Bugzilla XMLRPC API.
 
     Requires a minimum Bugzilla version 3.4.
     """
 
     def __init__(self, ui):
         bzaccess.__init__(self, ui)
 
         bzweb = self.ui.config('bugzilla', 'bzurl')
         bzweb = bzweb.rstrip("/") + "/xmlrpc.cgi"
 
         user = self.ui.config('bugzilla', 'user')
         passwd = self.ui.config('bugzilla', 'password')
 
         self.fixstatus = self.ui.config('bugzilla', 'fixstatus')
         self.fixresolution = self.ui.config('bugzilla', 'fixresolution')
 
         self.bzproxy = xmlrpclib.ServerProxy(bzweb, self.transport(bzweb))
         ver = self.bzproxy.Bugzilla.version()['version'].split('.')
         self.bzvermajor = int(ver[0])
         self.bzverminor = int(ver[1])
         login = self.bzproxy.User.login({'login': user, 'password': passwd,
                                          'restrict_login': True})
         self.bztoken = login.get('token', '')
 
     def transport(self, uri):
         if util.urlreq.urlparse(uri, "http")[0] == "https":
             return cookiesafetransport()
         else:
             return cookietransport()
 
     def get_bug_comments(self, id):
         """Return a string with all comment text for a bug."""
         c = self.bzproxy.Bug.comments({'ids': [id],
                                        'include_fields': ['text'],
                                        'token': self.bztoken})
         return ''.join([t['text'] for t in c['bugs'][str(id)]['comments']])
 
     def filter_real_bug_ids(self, bugs):
         probe = self.bzproxy.Bug.get({'ids': sorted(bugs.keys()),
                                       'include_fields': [],
                                       'permissive': True,
                                       'token': self.bztoken,
                                       })
         for badbug in probe['faults']:
             id = badbug['id']
             self.ui.status(_('bug %d does not exist\n') % id)
             del bugs[id]
 
     def filter_cset_known_bug_ids(self, node, bugs):
         for id in sorted(bugs.keys()):
             if self.get_bug_comments(id).find(short(node)) != -1:
                 self.ui.status(_('bug %d already knows about changeset %s\n') %
                                (id, short(node)))
                 del bugs[id]
 
     def updatebug(self, bugid, newstate, text, committer):
         args = {}
         if 'hours' in newstate:
             args['work_time'] = newstate['hours']
 
         if self.bzvermajor >= 4:
             args['ids'] = [bugid]
             args['comment'] = {'body' : text}
             if 'fix' in newstate:
                 args['status'] = self.fixstatus
                 args['resolution'] = self.fixresolution
             args['token'] = self.bztoken
             self.bzproxy.Bug.update(args)
         else:
             if 'fix' in newstate:
                 self.ui.warn(_("Bugzilla/XMLRPC needs Bugzilla 4.0 or later "
                                "to mark bugs fixed\n"))
             args['id'] = bugid
             args['comment'] = text
             self.bzproxy.Bug.add_comment(args)
 
 class bzxmlrpcemail(bzxmlrpc):
     """Read data from Bugzilla via XMLRPC, send updates via email.
 
     Advantages of sending updates via email:
       1. Comments can be added as any user, not just logged in user.
       2. Bug statuses or other fields not accessible via XMLRPC can
          potentially be updated.
 
     There is no XMLRPC function to change bug status before Bugzilla
     4.0, so bugs cannot be marked fixed via XMLRPC before Bugzilla 4.0.
     But bugs can be marked fixed via email from 3.4 onwards.
     """
 
     # The email interface changes subtly between 3.4 and 3.6. In 3.4,
     # in-email fields are specified as '@<fieldname> = <value>'. In
     # 3.6 this becomes '@<fieldname> <value>'. And fieldname @bug_id
     # in 3.4 becomes @id in 3.6. 3.6 and 4.0 both maintain backwards
     # compatibility, but rather than rely on this use the new format for
     # 4.0 onwards.
 
     def __init__(self, ui):
         bzxmlrpc.__init__(self, ui)
 
         self.bzemail = self.ui.config('bugzilla', 'bzemail')
         if not self.bzemail:
             raise error.Abort(_("configuration 'bzemail' missing"))
         mail.validateconfig(self.ui)
 
     def makecommandline(self, fieldname, value):
         if self.bzvermajor >= 4:
             return "@%s %s" % (fieldname, str(value))
         else:
             if fieldname == "id":
                 fieldname = "bug_id"
             return "@%s = %s" % (fieldname, str(value))
 
     def send_bug_modify_email(self, bugid, commands, comment, committer):
         '''send modification message to Bugzilla bug via email.
 
         The message format is documented in the Bugzilla email_in.pl
         specification. commands is a list of command lines, comment is the
         comment text.
 
         To stop users from crafting commit comments with
         Bugzilla commands, specify the bug ID via the message body, rather
         than the subject line, and leave a blank line after it.
         '''
         user = self.map_committer(committer)
         matches = self.bzproxy.User.get({'match': [user],
                                          'token': self.bztoken})
         if not matches['users']:
             user = self.ui.config('bugzilla', 'user')
             matches = self.bzproxy.User.get({'match': [user],
                                              'token': self.bztoken})
             if not matches['users']:
                 raise error.Abort(_("default bugzilla user %s email not found")
                                   % user)
         user = matches['users'][0]['email']
         commands.append(self.makecommandline("id", bugid))
 
         text = "\n".join(commands) + "\n\n" + comment
 
         _charsets = mail._charsets(self.ui)
         user = mail.addressencode(self.ui, user, _charsets)
         bzemail = mail.addressencode(self.ui, self.bzemail, _charsets)
         msg = mail.mimeencode(self.ui, text, _charsets)
         msg['From'] = user
         msg['To'] = bzemail
         msg['Subject'] = mail.headencode(self.ui, "Bug modification", _charsets)
         sendmail = mail.connect(self.ui)
         sendmail(user, bzemail, msg.as_string())
 
     def updatebug(self, bugid, newstate, text, committer):
         cmds = []
         if 'hours' in newstate:
             cmds.append(self.makecommandline("work_time", newstate['hours']))
         if 'fix' in newstate:
             cmds.append(self.makecommandline("bug_status", self.fixstatus))
             cmds.append(self.makecommandline("resolution", self.fixresolution))
         self.send_bug_modify_email(bugid, cmds, text, committer)
 
 class NotFound(LookupError):
     pass
 
 class bzrestapi(bzaccess):
     """Read and write bugzilla data using the REST API available since
     Bugzilla 5.0.
     """
     def __init__(self, ui):
         bzaccess.__init__(self, ui)
         bz = self.ui.config('bugzilla', 'bzurl')
         self.bzroot = '/'.join([bz, 'rest'])
         self.apikey = self.ui.config('bugzilla', 'apikey')
         self.user = self.ui.config('bugzilla', 'user')
         self.passwd = self.ui.config('bugzilla', 'password')
         self.fixstatus = self.ui.config('bugzilla', 'fixstatus')
         self.fixresolution = self.ui.config('bugzilla', 'fixresolution')
 
     def apiurl(self, targets, include_fields=None):
         url = '/'.join([self.bzroot] + [str(t) for t in targets])
         qv = {}
         if self.apikey:
             qv['api_key'] = self.apikey
         elif self.user and self.passwd:
             qv['login'] = self.user
             qv['password'] = self.passwd
         if include_fields:
             qv['include_fields'] = include_fields
         if qv:
             url = '%s?%s' % (url, util.urlreq.urlencode(qv))
         return url
 
     def _fetch(self, burl):
         try:
             resp = url.open(self.ui, burl)
             return json.loads(resp.read())
         except util.urlerr.httperror as inst:
             if inst.code == 401:
                 raise error.Abort(_('authorization failed'))
             if inst.code == 404:
                 raise NotFound()
             else:
                 raise
 
     def _submit(self, burl, data, method='POST'):
         data = json.dumps(data)
         if method == 'PUT':
             class putrequest(util.urlreq.request):
                 def get_method(self):
                     return 'PUT'
             request_type = putrequest
         else:
             request_type = util.urlreq.request
         req = request_type(burl, data,
                            {'Content-Type': 'application/json'})
         try:
             resp = url.opener(self.ui).open(req)
             return json.loads(resp.read())
         except util.urlerr.httperror as inst:
             if inst.code == 401:
                 raise error.Abort(_('authorization failed'))
             if inst.code == 404:
                 raise NotFound()
             else:
                 raise
 
     def filter_real_bug_ids(self, bugs):
         '''remove bug IDs that do not exist in Bugzilla from bugs.'''
         badbugs = set()
         for bugid in bugs:
             burl = self.apiurl(('bug', bugid), include_fields='status')
             try:
                 self._fetch(burl)
             except NotFound:
                 badbugs.add(bugid)
         for bugid in badbugs:
             del bugs[bugid]
 
     def filter_cset_known_bug_ids(self, node, bugs):
         '''remove bug IDs where node occurs in comment text from bugs.'''
         sn = short(node)
         for bugid in bugs.keys():
             burl = self.apiurl(('bug', bugid, 'comment'), include_fields='text')
             result = self._fetch(burl)
             comments = result['bugs'][str(bugid)]['comments']
             if any(sn in c['text'] for c in comments):
                 self.ui.status(_('bug %d already knows about changeset %s\n') %
                                (bugid, sn))
                 del bugs[bugid]
 
     def updatebug(self, bugid, newstate, text, committer):
         '''update the specified bug. Add comment text and set new states.
 
         If possible add the comment as being from the committer of
         the changeset. Otherwise use the default Bugzilla user.
         '''
         bugmod = {}
         if 'hours' in newstate:
             bugmod['work_time'] = newstate['hours']
         if 'fix' in newstate:
             bugmod['status'] = self.fixstatus
             bugmod['resolution'] = self.fixresolution
         if bugmod:
             # if we have to change the bugs state do it here
             bugmod['comment'] = {
                 'comment': text,
                 'is_private': False,
                 'is_markdown': False,
             }
             burl = self.apiurl(('bug', bugid))
             self._submit(burl, bugmod, method='PUT')
             self.ui.debug('updated bug %s\n' % bugid)
         else:
             burl = self.apiurl(('bug', bugid, 'comment'))
             self._submit(burl, {
                 'comment': text,
                 'is_private': False,
                 'is_markdown': False,
             })
             self.ui.debug('added comment to bug %s\n' % bugid)
 
     def notify(self, bugs, committer):
         '''Force sending of Bugzilla notification emails.
 
         Only required if the access method does not trigger notification
         emails automatically.
         '''
         pass
 
 class bugzilla(object):
     # supported versions of bugzilla. different versions have
     # different schemas.
     _versions = {
         '2.16': bzmysql,
         '2.18': bzmysql_2_18,
         '3.0':  bzmysql_3_0,
         'xmlrpc': bzxmlrpc,
         'xmlrpc+email': bzxmlrpcemail,
         'restapi': bzrestapi,
         }
 
     def __init__(self, ui, repo):
         self.ui = ui
         self.repo = repo
 
         bzversion = self.ui.config('bugzilla', 'version')
         try:
             bzclass = bugzilla._versions[bzversion]
         except KeyError:
             raise error.Abort(_('bugzilla version %s not supported') %
                              bzversion)
         self.bzdriver = bzclass(self.ui)
 
         self.bug_re = re.compile(
             self.ui.config('bugzilla', 'regexp'), re.IGNORECASE)
         self.fix_re = re.compile(
             self.ui.config('bugzilla', 'fixregexp'), re.IGNORECASE)
         self.split_re = re.compile(r'\D+')
 
     def find_bugs(self, ctx):
         '''return bugs dictionary created from commit comment.
 
         Extract bug info from changeset comments. Filter out any that are
         not known to Bugzilla, and any that already have a reference to
         the given changeset in their comments.
         '''
         start = 0
         hours = 0.0
         bugs = {}
         bugmatch = self.bug_re.search(ctx.description(), start)
         fixmatch = self.fix_re.search(ctx.description(), start)
         while True:
             bugattribs = {}
             if not bugmatch and not fixmatch:
                 break
             if not bugmatch:
                 m = fixmatch
             elif not fixmatch:
                 m = bugmatch
             else:
                 if bugmatch.start() < fixmatch.start():
                     m = bugmatch
                 else:
                     m = fixmatch
             start = m.end()
             if m is bugmatch:
                 bugmatch = self.bug_re.search(ctx.description(), start)
                 if 'fix' in bugattribs:
                     del bugattribs['fix']
             else:
                 fixmatch = self.fix_re.search(ctx.description(), start)
                 bugattribs['fix'] = None
 
             try:
                 ids = m.group('ids')
             except IndexError:
                 ids = m.group(1)
             try:
                 hours = float(m.group('hours'))
                 bugattribs['hours'] = hours
             except IndexError:
                 pass
             except TypeError:
                 pass
             except ValueError:
                 self.ui.status(_("%s: invalid hours\n") % m.group('hours'))
 
             for id in self.split_re.split(ids):
                 if not id:
                     continue
                 bugs[int(id)] = bugattribs
         if bugs:
             self.bzdriver.filter_real_bug_ids(bugs)
         if bugs:
             self.bzdriver.filter_cset_known_bug_ids(ctx.node(), bugs)
         return bugs
 
     def update(self, bugid, newstate, ctx):
         '''update bugzilla bug with reference to changeset.'''
 
         def webroot(root):
             '''strip leading prefix of repo root and turn into
             url-safe path.'''
             count = int(self.ui.config('bugzilla', 'strip'))
             root = util.pconvert(root)
             while count > 0:
                 c = root.find('/')
                 if c == -1:
                     break
                 root = root[c + 1:]
                 count -= 1
             return root
 
         mapfile = None
         tmpl = self.ui.config('bugzilla', 'template')
         if not tmpl:
             mapfile = self.ui.config('bugzilla', 'style')
         if not mapfile and not tmpl:
             tmpl = _('changeset {node|short} in repo {root} refers '
                      'to bug {bug}.\ndetails:\n\t{desc|tabindent}')
         spec = cmdutil.logtemplatespec(tmpl, mapfile)
         t = cmdutil.changeset_templater(self.ui, self.repo, spec,
                                         False, None, False)
         self.ui.pushbuffer()
         t.show(ctx, changes=ctx.changeset(),
                bug=str(bugid),
                hgweb=self.ui.config('web', 'baseurl'),
                root=self.repo.root,
                webroot=webroot(self.repo.root))
         data = self.ui.popbuffer()
         self.bzdriver.updatebug(bugid, newstate, data, util.email(ctx.user()))
 
     def notify(self, bugs, committer):
         '''ensure Bugzilla users are notified of bug change.'''
         self.bzdriver.notify(bugs, committer)
 
 def hook(ui, repo, hooktype, node=None, **kwargs):
     '''add comment to bugzilla for each changeset that refers to a
     bugzilla bug id. only add a comment once per bug, so same change
     seen multiple times does not fill bug with duplicate data.'''
     if node is None:
         raise error.Abort(_('hook type %s does not pass a changeset id') %
                          hooktype)
     try:
         bz = bugzilla(ui, repo)
         ctx = repo[node]
         bugs = bz.find_bugs(ctx)
         if bugs:
             for bug in bugs:
                 bz.update(bug, bugs[bug], ctx)
             bz.notify(bugs, util.email(ctx.user()))
     except Exception as e:
         raise error.Abort(_('Bugzilla error: %s') % e)

mercurial/debugcommands.py

@@ -1,2364 +1,2364 b''
 # debugcommands.py - command processing for debug* commands
 #
 # Copyright 2005-2016 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import codecs
 import collections
 import difflib
 import errno
 import operator
 import os
 import random
 import socket
 import ssl
 import string
 import sys
 import tempfile
 import time
 
 from .i18n import _
 from .node import (
     bin,
     hex,
     nullhex,
     nullid,
     nullrev,
     short,
 )
 from . import (
     bundle2,
     changegroup,
     cmdutil,
     color,
     context,
     dagparser,
     dagutil,
     encoding,
     error,
     exchange,
     extensions,
     filemerge,
     fileset,
     formatter,
     hg,
     localrepo,
     lock as lockmod,
     merge as mergemod,
     obsolete,
     obsutil,
     phases,
     policy,
     pvec,
     pycompat,
     registrar,
     repair,
     revlog,
     revset,
     revsetlang,
     scmutil,
     setdiscovery,
     simplemerge,
     smartset,
     sslutil,
     streamclone,
     templater,
     treediscovery,
     upgrade,
     util,
     vfs as vfsmod,
 )
 
 release = lockmod.release
 
 command = registrar.command()
 
 @command('debugancestor', [], _('[INDEX] REV1 REV2'), optionalrepo=True)
 def debugancestor(ui, repo, *args):
     """find the ancestor revision of two revisions in a given index"""
     if len(args) == 3:
         index, rev1, rev2 = args
         r = revlog.revlog(vfsmod.vfs(pycompat.getcwd(), audit=False), index)
         lookup = r.lookup
     elif len(args) == 2:
         if not repo:
             raise error.Abort(_('there is no Mercurial repository here '
                                 '(.hg not found)'))
         rev1, rev2 = args
         r = repo.changelog
         lookup = repo.lookup
     else:
         raise error.Abort(_('either two or three arguments required'))
     a = r.ancestor(lookup(rev1), lookup(rev2))
     ui.write('%d:%s\n' % (r.rev(a), hex(a)))
 
 @command('debugapplystreamclonebundle', [], 'FILE')
 def debugapplystreamclonebundle(ui, repo, fname):
     """apply a stream clone bundle file"""
     f = hg.openpath(ui, fname)
     gen = exchange.readbundle(ui, f, fname)
     gen.apply(repo)
 
 @command('debugbuilddag',
     [('m', 'mergeable-file', None, _('add single file mergeable changes')),
     ('o', 'overwritten-file', None, _('add single file all revs overwrite')),
     ('n', 'new-file', None, _('add new file at each rev'))],
     _('[OPTION]... [TEXT]'))
 def debugbuilddag(ui, repo, text=None,
                   mergeable_file=False,
                   overwritten_file=False,
                   new_file=False):
     """builds a repo with a given DAG from scratch in the current empty repo
 
     The description of the DAG is read from stdin if not given on the
     command line.
 
     Elements:
 
      - "+n" is a linear run of n nodes based on the current default parent
      - "." is a single node based on the current default parent
      - "$" resets the default parent to null (implied at the start);
            otherwise the default parent is always the last node created
      - "<p" sets the default parent to the backref p
      - "*p" is a fork at parent p, which is a backref
      - "*p1/p2" is a merge of parents p1 and p2, which are backrefs
      - "/p2" is a merge of the preceding node and p2
      - ":tag" defines a local tag for the preceding node
      - "@branch" sets the named branch for subsequent nodes
      - "#...\\n" is a comment up to the end of the line
 
     Whitespace between the above elements is ignored.
 
     A backref is either
 
      - a number n, which references the node curr-n, where curr is the current
        node, or
      - the name of a local tag you placed earlier using ":tag", or
      - empty to denote the default parent.
 
     All string valued-elements are either strictly alphanumeric, or must
     be enclosed in double quotes ("..."), with "\\" as escape character.
     """
 
     if text is None:
         ui.status(_("reading DAG from stdin\n"))
         text = ui.fin.read()
 
     cl = repo.changelog
     if len(cl) > 0:
         raise error.Abort(_('repository is not empty'))
 
     # determine number of revs in DAG
     total = 0
     for type, data in dagparser.parsedag(text):
         if type == 'n':
             total += 1
 
     if mergeable_file:
         linesperrev = 2
         # make a file with k lines per rev
         initialmergedlines = [str(i) for i in xrange(0, total * linesperrev)]
         initialmergedlines.append("")
 
     tags = []
 
     wlock = lock = tr = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         tr = repo.transaction("builddag")
 
         at = -1
         atbranch = 'default'
         nodeids = []
         id = 0
         ui.progress(_('building'), id, unit=_('revisions'), total=total)
         for type, data in dagparser.parsedag(text):
             if type == 'n':
                 ui.note(('node %s\n' % str(data)))
                 id, ps = data
 
                 files = []
                 fctxs = {}
 
                 p2 = None
                 if mergeable_file:
                     fn = "mf"
                     p1 = repo[ps[0]]
                     if len(ps) > 1:
                         p2 = repo[ps[1]]
                         pa = p1.ancestor(p2)
                         base, local, other = [x[fn].data() for x in (pa, p1,
                                                                      p2)]
                         m3 = simplemerge.Merge3Text(base, local, other)
                         ml = [l.strip() for l in m3.merge_lines()]
                         ml.append("")
                     elif at > 0:
                         ml = p1[fn].data().split("\n")
                     else:
                         ml = initialmergedlines
                     ml[id * linesperrev] += " r%i" % id
                     mergedtext = "\n".join(ml)
                     files.append(fn)
                     fctxs[fn] = context.memfilectx(repo, fn, mergedtext)
 
                 if overwritten_file:
                     fn = "of"
                     files.append(fn)
                     fctxs[fn] = context.memfilectx(repo, fn, "r%i\n" % id)
 
                 if new_file:
                     fn = "nf%i" % id
                     files.append(fn)
                     fctxs[fn] = context.memfilectx(repo, fn, "r%i\n" % id)
                     if len(ps) > 1:
                         if not p2:
                             p2 = repo[ps[1]]
                         for fn in p2:
                             if fn.startswith("nf"):
                                 files.append(fn)
                                 fctxs[fn] = p2[fn]
 
                 def fctxfn(repo, cx, path):
                     return fctxs.get(path)
 
                 if len(ps) == 0 or ps[0] < 0:
                     pars = [None, None]
                 elif len(ps) == 1:
                     pars = [nodeids[ps[0]], None]
                 else:
                     pars = [nodeids[p] for p in ps]
                 cx = context.memctx(repo, pars, "r%i" % id, files, fctxfn,
                                     date=(id, 0),
                                     user="debugbuilddag",
                                     extra={'branch': atbranch})
                 nodeid = repo.commitctx(cx)
                 nodeids.append(nodeid)
                 at = id
             elif type == 'l':
                 id, name = data
                 ui.note(('tag %s\n' % name))
                 tags.append("%s %s\n" % (hex(repo.changelog.node(id)), name))
             elif type == 'a':
                 ui.note(('branch %s\n' % data))
                 atbranch = data
             ui.progress(_('building'), id, unit=_('revisions'), total=total)
         tr.close()
 
         if tags:
             repo.vfs.write("localtags", "".join(tags))
     finally:
         ui.progress(_('building'), None)
         release(tr, lock, wlock)
 
 def _debugchangegroup(ui, gen, all=None, indent=0, **opts):
     indent_string = ' ' * indent
     if all:
         ui.write(("%sformat: id, p1, p2, cset, delta base, len(delta)\n")
                  % indent_string)
 
         def showchunks(named):
             ui.write("\n%s%s\n" % (indent_string, named))
             for deltadata in gen.deltaiter():
                 node, p1, p2, cs, deltabase, delta, flags = deltadata
                 ui.write("%s%s %s %s %s %s %s\n" %
                          (indent_string, hex(node), hex(p1), hex(p2),
                           hex(cs), hex(deltabase), len(delta)))
 
         chunkdata = gen.changelogheader()
         showchunks("changelog")
         chunkdata = gen.manifestheader()
         showchunks("manifest")
         for chunkdata in iter(gen.filelogheader, {}):
             fname = chunkdata['filename']
             showchunks(fname)
     else:
         if isinstance(gen, bundle2.unbundle20):
             raise error.Abort(_('use debugbundle2 for this file'))
         chunkdata = gen.changelogheader()
         for deltadata in gen.deltaiter():
             node, p1, p2, cs, deltabase, delta, flags = deltadata
             ui.write("%s%s\n" % (indent_string, hex(node)))
 
 def _debugobsmarkers(ui, part, indent=0, **opts):
     """display version and markers contained in 'data'"""
     opts = pycompat.byteskwargs(opts)
     data = part.read()
     indent_string = ' ' * indent
     try:
         version, markers = obsolete._readmarkers(data)
     except error.UnknownVersion as exc:
         msg = "%sunsupported version: %s (%d bytes)\n"
         msg %= indent_string, exc.version, len(data)
         ui.write(msg)
     else:
         msg = "%sversion: %d (%d bytes)\n"
         msg %= indent_string, version, len(data)
         ui.write(msg)
         fm = ui.formatter('debugobsolete', opts)
         for rawmarker in sorted(markers):
             m = obsutil.marker(None, rawmarker)
             fm.startitem()
             fm.plain(indent_string)
             cmdutil.showmarker(fm, m)
         fm.end()
 
 def _debugphaseheads(ui, data, indent=0):
     """display version and markers contained in 'data'"""
     indent_string = ' ' * indent
     headsbyphase = phases.binarydecode(data)
     for phase in phases.allphases:
         for head in headsbyphase[phase]:
             ui.write(indent_string)
             ui.write('%s %s\n' % (hex(head), phases.phasenames[phase]))
 
 def _quasirepr(thing):
     if isinstance(thing, (dict, util.sortdict, collections.OrderedDict)):
         return '{%s}' % (
             b', '.join(b'%s: %s' % (k, thing[k]) for k in sorted(thing)))
     return pycompat.bytestr(repr(thing))
 
 def _debugbundle2(ui, gen, all=None, **opts):
     """lists the contents of a bundle2"""
     if not isinstance(gen, bundle2.unbundle20):
         raise error.Abort(_('not a bundle2 file'))
     ui.write(('Stream params: %s\n' % _quasirepr(gen.params)))
     parttypes = opts.get(r'part_type', [])
     for part in gen.iterparts():
         if parttypes and part.type not in parttypes:
             continue
         ui.write('%s -- %s\n' % (part.type, _quasirepr(part.params)))
         if part.type == 'changegroup':
             version = part.params.get('version', '01')
             cg = changegroup.getunbundler(version, part, 'UN')
             _debugchangegroup(ui, cg, all=all, indent=4, **opts)
         if part.type == 'obsmarkers':
             _debugobsmarkers(ui, part, indent=4, **opts)
         if part.type == 'phase-heads':
             _debugphaseheads(ui, part, indent=4)
 
 @command('debugbundle',
         [('a', 'all', None, _('show all details')),
          ('', 'part-type', [], _('show only the named part type')),
          ('', 'spec', None, _('print the bundlespec of the bundle'))],
         _('FILE'),
         norepo=True)
 def debugbundle(ui, bundlepath, all=None, spec=None, **opts):
     """lists the contents of a bundle"""
     with hg.openpath(ui, bundlepath) as f:
         if spec:
             spec = exchange.getbundlespec(ui, f)
             ui.write('%s\n' % spec)
             return
 
         gen = exchange.readbundle(ui, f, bundlepath)
         if isinstance(gen, bundle2.unbundle20):
             return _debugbundle2(ui, gen, all=all, **opts)
         _debugchangegroup(ui, gen, all=all, **opts)
 
 @command('debugcapabilities',
         [], _('PATH'),
         norepo=True)
 def debugcapabilities(ui, path, **opts):
     """lists the capabilities of a remote peer"""
     peer = hg.peer(ui, opts, path)
     caps = peer.capabilities()
     ui.write(('Main capabilities:\n'))
     for c in sorted(caps):
         ui.write(('  %s\n') % c)
     b2caps = bundle2.bundle2caps(peer)
     if b2caps:
         ui.write(('Bundle2 capabilities:\n'))
         for key, values in sorted(b2caps.iteritems()):
             ui.write(('  %s\n') % key)
             for v in values:
                 ui.write(('    %s\n') % v)
 
 @command('debugcheckstate', [], '')
 def debugcheckstate(ui, repo):
     """validate the correctness of the current dirstate"""
     parent1, parent2 = repo.dirstate.parents()
     m1 = repo[parent1].manifest()
     m2 = repo[parent2].manifest()
     errors = 0
     for f in repo.dirstate:
         state = repo.dirstate[f]
         if state in "nr" and f not in m1:
             ui.warn(_("%s in state %s, but not in manifest1\n") % (f, state))
             errors += 1
         if state in "a" and f in m1:
             ui.warn(_("%s in state %s, but also in manifest1\n") % (f, state))
             errors += 1
         if state in "m" and f not in m1 and f not in m2:
             ui.warn(_("%s in state %s, but not in either manifest\n") %
                     (f, state))
             errors += 1
     for f in m1:
         state = repo.dirstate[f]
         if state not in "nrm":
             ui.warn(_("%s in manifest1, but listed as state %s") % (f, state))
             errors += 1
     if errors:
         error = _(".hg/dirstate inconsistent with current parent's manifest")
         raise error.Abort(error)
 
 @command('debugcolor',
         [('', 'style', None, _('show all configured styles'))],
         'hg debugcolor')
 def debugcolor(ui, repo, **opts):
     """show available color, effects or style"""
     ui.write(('color mode: %s\n') % ui._colormode)
     if opts.get(r'style'):
         return _debugdisplaystyle(ui)
     else:
         return _debugdisplaycolor(ui)
 
 def _debugdisplaycolor(ui):
     ui = ui.copy()
     ui._styles.clear()
     for effect in color._activeeffects(ui).keys():
         ui._styles[effect] = effect
     if ui._terminfoparams:
         for k, v in ui.configitems('color'):
             if k.startswith('color.'):
                 ui._styles[k] = k[6:]
             elif k.startswith('terminfo.'):
                 ui._styles[k] = k[9:]
     ui.write(_('available colors:\n'))
     # sort label with a '_' after the other to group '_background' entry.
     items = sorted(ui._styles.items(),
                    key=lambda i: ('_' in i[0], i[0], i[1]))
     for colorname, label in items:
         ui.write(('%s\n') % colorname, label=label)
 
 def _debugdisplaystyle(ui):
     ui.write(_('available style:\n'))
     width = max(len(s) for s in ui._styles)
     for label, effects in sorted(ui._styles.items()):
         ui.write('%s' % label, label=label)
         if effects:
             # 50
             ui.write(': ')
             ui.write(' ' * (max(0, width - len(label))))
             ui.write(', '.join(ui.label(e, e) for e in effects.split()))
         ui.write('\n')
 
 @command('debugcreatestreamclonebundle', [], 'FILE')
 def debugcreatestreamclonebundle(ui, repo, fname):
     """create a stream clone bundle file
 
     Stream bundles are special bundles that are essentially archives of
     revlog files. They are commonly used for cloning very quickly.
     """
     # TODO we may want to turn this into an abort when this functionality
     # is moved into `hg bundle`.
     if phases.hassecret(repo):
         ui.warn(_('(warning: stream clone bundle will contain secret '
                   'revisions)\n'))
 
     requirements, gen = streamclone.generatebundlev1(repo)
     changegroup.writechunks(ui, gen, fname)
 
     ui.write(_('bundle requirements: %s\n') % ', '.join(sorted(requirements)))
 
 @command('debugdag',
     [('t', 'tags', None, _('use tags as labels')),
     ('b', 'branches', None, _('annotate with branch names')),
     ('', 'dots', None, _('use dots for runs')),
     ('s', 'spaces', None, _('separate elements by spaces'))],
     _('[OPTION]... [FILE [REV]...]'),
     optionalrepo=True)
 def debugdag(ui, repo, file_=None, *revs, **opts):
     """format the changelog or an index DAG as a concise textual description
 
     If you pass a revlog index, the revlog's DAG is emitted. If you list
     revision numbers, they get labeled in the output as rN.
 
     Otherwise, the changelog DAG of the current repo is emitted.
     """
     spaces = opts.get(r'spaces')
     dots = opts.get(r'dots')
     if file_:
         rlog = revlog.revlog(vfsmod.vfs(pycompat.getcwd(), audit=False),
                              file_)
         revs = set((int(r) for r in revs))
         def events():
             for r in rlog:
                 yield 'n', (r, list(p for p in rlog.parentrevs(r)
                                         if p != -1))
                 if r in revs:
                     yield 'l', (r, "r%i" % r)
     elif repo:
         cl = repo.changelog
         tags = opts.get(r'tags')
         branches = opts.get(r'branches')
         if tags:
             labels = {}
             for l, n in repo.tags().items():
                 labels.setdefault(cl.rev(n), []).append(l)
         def events():
             b = "default"
             for r in cl:
                 if branches:
                     newb = cl.read(cl.node(r))[5]['branch']
                     if newb != b:
                         yield 'a', newb
                         b = newb
                 yield 'n', (r, list(p for p in cl.parentrevs(r)
                                         if p != -1))
                 if tags:
                     ls = labels.get(r)
                     if ls:
                         for l in ls:
                             yield 'l', (r, l)
     else:
         raise error.Abort(_('need repo for changelog dag'))
 
     for line in dagparser.dagtextlines(events(),
                                        addspaces=spaces,
                                        wraplabels=True,
                                        wrapannotations=True,
                                        wrapnonlinear=dots,
                                        usedots=dots,
                                        maxlinewidth=70):
         ui.write(line)
         ui.write("\n")
 
 @command('debugdata', cmdutil.debugrevlogopts, _('-c|-m|FILE REV'))
 def debugdata(ui, repo, file_, rev=None, **opts):
     """dump the contents of a data file revision"""
     opts = pycompat.byteskwargs(opts)
     if opts.get('changelog') or opts.get('manifest') or opts.get('dir'):
         if rev is not None:
             raise error.CommandError('debugdata', _('invalid arguments'))
         file_, rev = None, file_
     elif rev is None:
         raise error.CommandError('debugdata', _('invalid arguments'))
     r = cmdutil.openrevlog(repo, 'debugdata', file_, opts)
     try:
         ui.write(r.revision(r.lookup(rev), raw=True))
     except KeyError:
         raise error.Abort(_('invalid revision identifier %s') % rev)
 
 @command('debugdate',
     [('e', 'extended', None, _('try extended date formats'))],
     _('[-e] DATE [RANGE]'),
     norepo=True, optionalrepo=True)
 def debugdate(ui, date, range=None, **opts):
     """parse and display a date"""
     if opts[r"extended"]:
         d = util.parsedate(date, util.extendeddateformats)
     else:
         d = util.parsedate(date)
     ui.write(("internal: %s %s\n") % d)
     ui.write(("standard: %s\n") % util.datestr(d))
     if range:
         m = util.matchdate(range)
         ui.write(("match: %s\n") % m(d[0]))
 
 @command('debugdeltachain',
     cmdutil.debugrevlogopts + cmdutil.formatteropts,
     _('-c|-m|FILE'),
     optionalrepo=True)
 def debugdeltachain(ui, repo, file_=None, **opts):
     """dump information about delta chains in a revlog
 
     Output can be templatized. Available template keywords are:
 
     :``rev``:       revision number
     :``chainid``:   delta chain identifier (numbered by unique base)
     :``chainlen``:  delta chain length to this revision
     :``prevrev``:   previous revision in delta chain
     :``deltatype``: role of delta / how it was computed
     :``compsize``:  compressed size of revision
     :``uncompsize``: uncompressed size of revision
     :``chainsize``: total size of compressed revisions in chain
     :``chainratio``: total chain size divided by uncompressed revision size
                     (new delta chains typically start at ratio 2.00)
     :``lindist``:   linear distance from base revision in delta chain to end
                     of this revision
     :``extradist``: total size of revisions not part of this delta chain from
                     base of delta chain to end of this revision; a measurement
                     of how much extra data we need to read/seek across to read
                     the delta chain for this revision
     :``extraratio``: extradist divided by chainsize; another representation of
                     how much unrelated data is needed to load this delta chain
 
     If the repository is configured to use the sparse read, additional keywords
     are available:
 
     :``readsize``:     total size of data read from the disk for a revision
                        (sum of the sizes of all the blocks)
     :``largestblock``: size of the largest block of data read from the disk
     :``readdensity``:  density of useful bytes in the data read from the disk
 
     The sparse read can be enabled with experimental.sparse-read = True
     """
     opts = pycompat.byteskwargs(opts)
     r = cmdutil.openrevlog(repo, 'debugdeltachain', file_, opts)
     index = r.index
     generaldelta = r.version & revlog.FLAG_GENERALDELTA
     withsparseread = getattr(r, '_withsparseread', False)
 
     def revinfo(rev):
         e = index[rev]
         compsize = e[1]
         uncompsize = e[2]
         chainsize = 0
 
         if generaldelta:
             if e[3] == e[5]:
                 deltatype = 'p1'
             elif e[3] == e[6]:
                 deltatype = 'p2'
             elif e[3] == rev - 1:
                 deltatype = 'prev'
             elif e[3] == rev:
                 deltatype = 'base'
             else:
                 deltatype = 'other'
         else:
             if e[3] == rev:
                 deltatype = 'base'
             else:
                 deltatype = 'prev'
 
         chain = r._deltachain(rev)[0]
         for iterrev in chain:
             e = index[iterrev]
             chainsize += e[1]
 
         return compsize, uncompsize, deltatype, chain, chainsize
 
     fm = ui.formatter('debugdeltachain', opts)
 
     fm.plain('    rev  chain# chainlen     prev   delta       '
              'size    rawsize  chainsize     ratio   lindist extradist '
              'extraratio')
     if withsparseread:
         fm.plain('   readsize largestblk rddensity')
     fm.plain('\n')
 
     chainbases = {}
     for rev in r:
         comp, uncomp, deltatype, chain, chainsize = revinfo(rev)
         chainbase = chain[0]
         chainid = chainbases.setdefault(chainbase, len(chainbases) + 1)
         start = r.start
         length = r.length
         basestart = start(chainbase)
         revstart = start(rev)
         lineardist = revstart + comp - basestart
         extradist = lineardist - chainsize
         try:
             prevrev = chain[-2]
         except IndexError:
             prevrev = -1
 
         chainratio = float(chainsize) / float(uncomp)
         extraratio = float(extradist) / float(chainsize)
 
         fm.startitem()
         fm.write('rev chainid chainlen prevrev deltatype compsize '
                  'uncompsize chainsize chainratio lindist extradist '
                  'extraratio',
                  '%7d %7d %8d %8d %7s %10d %10d %10d %9.5f %9d %9d %10.5f',
                  rev, chainid, len(chain), prevrev, deltatype, comp,
                  uncomp, chainsize, chainratio, lineardist, extradist,
                  extraratio,
                  rev=rev, chainid=chainid, chainlen=len(chain),
                  prevrev=prevrev, deltatype=deltatype, compsize=comp,
                  uncompsize=uncomp, chainsize=chainsize,
                  chainratio=chainratio, lindist=lineardist,
                  extradist=extradist, extraratio=extraratio)
         if withsparseread:
             readsize = 0
             largestblock = 0
             for revschunk in revlog._slicechunk(r, chain):
                 blkend = start(revschunk[-1]) + length(revschunk[-1])
                 blksize = blkend - start(revschunk[0])
 
                 readsize += blksize
                 if largestblock < blksize:
                     largestblock = blksize
 
             readdensity = float(chainsize) / float(readsize)
 
             fm.write('readsize largestblock readdensity',
                      ' %10d %10d %9.5f',
                      readsize, largestblock, readdensity,
                      readsize=readsize, largestblock=largestblock,
                      readdensity=readdensity)
 
         fm.plain('\n')
 
     fm.end()
 
 @command('debugdirstate|debugstate',
     [('', 'nodates', None, _('do not display the saved mtime')),
     ('', 'datesort', None, _('sort by saved mtime'))],
     _('[OPTION]...'))
 def debugstate(ui, repo, **opts):
     """show the contents of the current dirstate"""
 
     nodates = opts.get(r'nodates')
     datesort = opts.get(r'datesort')
 
     timestr = ""
     if datesort:
         keyfunc = lambda x: (x[1][3], x[0]) # sort by mtime, then by filename
     else:
         keyfunc = None # sort by filename
     for file_, ent in sorted(repo.dirstate._map.iteritems(), key=keyfunc):
         if ent[3] == -1:
             timestr = 'unset               '
         elif nodates:
             timestr = 'set                 '
         else:
-            timestr = time.strftime("%Y-%m-%d %H:%M:%S ",
+            timestr = time.strftime(r"%Y-%m-%d %H:%M:%S ",
                                     time.localtime(ent[3]))
         if ent[1] & 0o20000:
             mode = 'lnk'
         else:
             mode = '%3o' % (ent[1] & 0o777 & ~util.umask)
         ui.write("%c %s %10d %s%s\n" % (ent[0], mode, ent[2], timestr, file_))
     for f in repo.dirstate.copies():
         ui.write(_("copy: %s -> %s\n") % (repo.dirstate.copied(f), f))
 
 @command('debugdiscovery',
     [('', 'old', None, _('use old-style discovery')),
     ('', 'nonheads', None,
      _('use old-style discovery with non-heads included')),
     ] + cmdutil.remoteopts,
     _('[-l REV] [-r REV] [-b BRANCH]... [OTHER]'))
 def debugdiscovery(ui, repo, remoteurl="default", **opts):
     """runs the changeset discovery protocol in isolation"""
     opts = pycompat.byteskwargs(opts)
     remoteurl, branches = hg.parseurl(ui.expandpath(remoteurl),
                                       opts.get('branch'))
     remote = hg.peer(repo, opts, remoteurl)
     ui.status(_('comparing with %s\n') % util.hidepassword(remoteurl))
 
     # make sure tests are repeatable
     random.seed(12323)
 
     def doit(localheads, remoteheads, remote=remote):
         if opts.get('old'):
             if localheads:
                 raise error.Abort('cannot use localheads with old style '
                                  'discovery')
             if not util.safehasattr(remote, 'branches'):
                 # enable in-client legacy support
                 remote = localrepo.locallegacypeer(remote.local())
             common, _in, hds = treediscovery.findcommonincoming(repo, remote,
                                                                 force=True)
             common = set(common)
             if not opts.get('nonheads'):
                 ui.write(("unpruned common: %s\n") %
                          " ".join(sorted(short(n) for n in common)))
                 dag = dagutil.revlogdag(repo.changelog)
                 all = dag.ancestorset(dag.internalizeall(common))
                 common = dag.externalizeall(dag.headsetofconnecteds(all))
         else:
             common, any, hds = setdiscovery.findcommonheads(ui, repo, remote)
         common = set(common)
         rheads = set(hds)
         lheads = set(repo.heads())
         ui.write(("common heads: %s\n") %
                  " ".join(sorted(short(n) for n in common)))
         if lheads <= common:
             ui.write(("local is subset\n"))
         elif rheads <= common:
             ui.write(("remote is subset\n"))
 
     serverlogs = opts.get('serverlog')
     if serverlogs:
         for filename in serverlogs:
             with open(filename, 'r') as logfile:
                 line = logfile.readline()
                 while line:
                     parts = line.strip().split(';')
                     op = parts[1]
                     if op == 'cg':
                         pass
                     elif op == 'cgss':
                         doit(parts[2].split(' '), parts[3].split(' '))
                     elif op == 'unb':
                         doit(parts[3].split(' '), parts[2].split(' '))
                     line = logfile.readline()
     else:
         remoterevs, _checkout = hg.addbranchrevs(repo, remote, branches,
                                                  opts.get('remote_head'))
         localrevs = opts.get('local_head')
         doit(localrevs, remoterevs)
 
 @command('debugextensions', cmdutil.formatteropts, [], norepo=True)
 def debugextensions(ui, **opts):
     '''show information about active extensions'''
     opts = pycompat.byteskwargs(opts)
     exts = extensions.extensions(ui)
     hgver = util.version()
     fm = ui.formatter('debugextensions', opts)
     for extname, extmod in sorted(exts, key=operator.itemgetter(0)):
         isinternal = extensions.ismoduleinternal(extmod)
         extsource = pycompat.fsencode(extmod.__file__)
         if isinternal:
             exttestedwith = []  # never expose magic string to users
         else:
             exttestedwith = getattr(extmod, 'testedwith', '').split()
         extbuglink = getattr(extmod, 'buglink', None)
 
         fm.startitem()
 
         if ui.quiet or ui.verbose:
             fm.write('name', '%s\n', extname)
         else:
             fm.write('name', '%s', extname)
             if isinternal or hgver in exttestedwith:
                 fm.plain('\n')
             elif not exttestedwith:
                 fm.plain(_(' (untested!)\n'))
             else:
                 lasttestedversion = exttestedwith[-1]
                 fm.plain(' (%s!)\n' % lasttestedversion)
 
         fm.condwrite(ui.verbose and extsource, 'source',
                  _('  location: %s\n'), extsource or "")
 
         if ui.verbose:
             fm.plain(_('  bundled: %s\n') % ['no', 'yes'][isinternal])
         fm.data(bundled=isinternal)
 
         fm.condwrite(ui.verbose and exttestedwith, 'testedwith',
                      _('  tested with: %s\n'),
                      fm.formatlist(exttestedwith, name='ver'))
 
         fm.condwrite(ui.verbose and extbuglink, 'buglink',
                  _('  bug reporting: %s\n'), extbuglink or "")
 
     fm.end()
 
 @command('debugfileset',
     [('r', 'rev', '', _('apply the filespec on this revision'), _('REV'))],
     _('[-r REV] FILESPEC'))
 def debugfileset(ui, repo, expr, **opts):
     '''parse and apply a fileset specification'''
     ctx = scmutil.revsingle(repo, opts.get(r'rev'), None)
     if ui.verbose:
         tree = fileset.parse(expr)
         ui.note(fileset.prettyformat(tree), "\n")
 
     for f in ctx.getfileset(expr):
         ui.write("%s\n" % f)
 
 @command('debugfsinfo', [], _('[PATH]'), norepo=True)
 def debugfsinfo(ui, path="."):
     """show information detected about current filesystem"""
     ui.write(('exec: %s\n') % (util.checkexec(path) and 'yes' or 'no'))
     ui.write(('fstype: %s\n') % (util.getfstype(path) or '(unknown)'))
     ui.write(('symlink: %s\n') % (util.checklink(path) and 'yes' or 'no'))
     ui.write(('hardlink: %s\n') % (util.checknlink(path) and 'yes' or 'no'))
     casesensitive = '(unknown)'
     try:
         with tempfile.NamedTemporaryFile(prefix='.debugfsinfo', dir=path) as f:
             casesensitive = util.fscasesensitive(f.name) and 'yes' or 'no'
     except OSError:
         pass
     ui.write(('case-sensitive: %s\n') % casesensitive)
 
 @command('debuggetbundle',
     [('H', 'head', [], _('id of head node'), _('ID')),
     ('C', 'common', [], _('id of common node'), _('ID')),
     ('t', 'type', 'bzip2', _('bundle compression type to use'), _('TYPE'))],
     _('REPO FILE [-H|-C ID]...'),
     norepo=True)
 def debuggetbundle(ui, repopath, bundlepath, head=None, common=None, **opts):
     """retrieves a bundle from a repo
 
     Every ID must be a full-length hex node id string. Saves the bundle to the
     given file.
     """
     opts = pycompat.byteskwargs(opts)
     repo = hg.peer(ui, opts, repopath)
     if not repo.capable('getbundle'):
         raise error.Abort("getbundle() not supported by target repository")
     args = {}
     if common:
         args[r'common'] = [bin(s) for s in common]
     if head:
         args[r'heads'] = [bin(s) for s in head]
     # TODO: get desired bundlecaps from command line.
     args[r'bundlecaps'] = None
     bundle = repo.getbundle('debug', **args)
 
     bundletype = opts.get('type', 'bzip2').lower()
     btypes = {'none': 'HG10UN',
               'bzip2': 'HG10BZ',
               'gzip': 'HG10GZ',
               'bundle2': 'HG20'}
     bundletype = btypes.get(bundletype)
     if bundletype not in bundle2.bundletypes:
         raise error.Abort(_('unknown bundle type specified with --type'))
     bundle2.writebundle(ui, bundle, bundlepath, bundletype)
 
 @command('debugignore', [], '[FILE]')
 def debugignore(ui, repo, *files, **opts):
     """display the combined ignore pattern and information about ignored files
 
     With no argument display the combined ignore pattern.
 
     Given space separated file names, shows if the given file is ignored and
     if so, show the ignore rule (file and line number) that matched it.
     """
     ignore = repo.dirstate._ignore
     if not files:
         # Show all the patterns
         ui.write("%s\n" % repr(ignore))
     else:
         m = scmutil.match(repo[None], pats=files)
         for f in m.files():
             nf = util.normpath(f)
             ignored = None
             ignoredata = None
             if nf != '.':
                 if ignore(nf):
                     ignored = nf
                     ignoredata = repo.dirstate._ignorefileandline(nf)
                 else:
                     for p in util.finddirs(nf):
                         if ignore(p):
                             ignored = p
                             ignoredata = repo.dirstate._ignorefileandline(p)
                             break
             if ignored:
                 if ignored == nf:
                     ui.write(_("%s is ignored\n") % m.uipath(f))
                 else:
                     ui.write(_("%s is ignored because of "
                                "containing folder %s\n")
                              % (m.uipath(f), ignored))
                 ignorefile, lineno, line = ignoredata
                 ui.write(_("(ignore rule in %s, line %d: '%s')\n")
                          % (ignorefile, lineno, line))
             else:
                 ui.write(_("%s is not ignored\n") % m.uipath(f))
 
 @command('debugindex', cmdutil.debugrevlogopts +
     [('f', 'format', 0, _('revlog format'), _('FORMAT'))],
     _('[-f FORMAT] -c|-m|FILE'),
     optionalrepo=True)
 def debugindex(ui, repo, file_=None, **opts):
     """dump the contents of an index file"""
     opts = pycompat.byteskwargs(opts)
     r = cmdutil.openrevlog(repo, 'debugindex', file_, opts)
     format = opts.get('format', 0)
     if format not in (0, 1):
         raise error.Abort(_("unknown format %d") % format)
 
     generaldelta = r.version & revlog.FLAG_GENERALDELTA
     if generaldelta:
         basehdr = ' delta'
     else:
         basehdr = '  base'
 
     if ui.debugflag:
         shortfn = hex
     else:
         shortfn = short
 
     # There might not be anything in r, so have a sane default
     idlen = 12
     for i in r:
         idlen = len(shortfn(r.node(i)))
         break
 
     if format == 0:
         ui.write(("   rev    offset  length " + basehdr + " linkrev"
                  " %s %s p2\n") % ("nodeid".ljust(idlen), "p1".ljust(idlen)))
     elif format == 1:
         ui.write(("   rev flag   offset   length"
                  "     size " + basehdr + "   link     p1     p2"
                  " %s\n") % "nodeid".rjust(idlen))
 
     for i in r:
         node = r.node(i)
         if generaldelta:
             base = r.deltaparent(i)
         else:
             base = r.chainbase(i)
         if format == 0:
             try:
                 pp = r.parents(node)
             except Exception:
                 pp = [nullid, nullid]
             ui.write("% 6d % 9d % 7d % 6d % 7d %s %s %s\n" % (
                     i, r.start(i), r.length(i), base, r.linkrev(i),
                     shortfn(node), shortfn(pp[0]), shortfn(pp[1])))
         elif format == 1:
             pr = r.parentrevs(i)
             ui.write("% 6d %04x % 8d % 8d % 8d % 6d % 6d % 6d % 6d %s\n" % (
                     i, r.flags(i), r.start(i), r.length(i), r.rawsize(i),
                     base, r.linkrev(i), pr[0], pr[1], shortfn(node)))
 
 @command('debugindexdot', cmdutil.debugrevlogopts,
     _('-c|-m|FILE'), optionalrepo=True)
 def debugindexdot(ui, repo, file_=None, **opts):
     """dump an index DAG as a graphviz dot file"""
     opts = pycompat.byteskwargs(opts)
     r = cmdutil.openrevlog(repo, 'debugindexdot', file_, opts)
     ui.write(("digraph G {\n"))
     for i in r:
         node = r.node(i)
         pp = r.parents(node)
         ui.write("\t%d -> %d\n" % (r.rev(pp[0]), i))
         if pp[1] != nullid:
             ui.write("\t%d -> %d\n" % (r.rev(pp[1]), i))
     ui.write("}\n")
 
 @command('debuginstall', [] + cmdutil.formatteropts, '', norepo=True)
 def debuginstall(ui, **opts):
     '''test Mercurial installation
 
     Returns 0 on success.
     '''
     opts = pycompat.byteskwargs(opts)
 
     def writetemp(contents):
         (fd, name) = tempfile.mkstemp(prefix="hg-debuginstall-")
         f = os.fdopen(fd, pycompat.sysstr("wb"))
         f.write(contents)
         f.close()
         return name
 
     problems = 0
 
     fm = ui.formatter('debuginstall', opts)
     fm.startitem()
 
     # encoding
     fm.write('encoding', _("checking encoding (%s)...\n"), encoding.encoding)
     err = None
     try:
         codecs.lookup(pycompat.sysstr(encoding.encoding))
     except LookupError as inst:
         err = util.forcebytestr(inst)
         problems += 1
     fm.condwrite(err, 'encodingerror', _(" %s\n"
                  " (check that your locale is properly set)\n"), err)
 
     # Python
     fm.write('pythonexe', _("checking Python executable (%s)\n"),
              pycompat.sysexecutable)
     fm.write('pythonver', _("checking Python version (%s)\n"),
              ("%d.%d.%d" % sys.version_info[:3]))
     fm.write('pythonlib', _("checking Python lib (%s)...\n"),
              os.path.dirname(pycompat.fsencode(os.__file__)))
 
     security = set(sslutil.supportedprotocols)
     if sslutil.hassni:
         security.add('sni')
 
     fm.write('pythonsecurity', _("checking Python security support (%s)\n"),
              fm.formatlist(sorted(security), name='protocol',
                            fmt='%s', sep=','))
 
     # These are warnings, not errors. So don't increment problem count. This
     # may change in the future.
     if 'tls1.2' not in security:
         fm.plain(_('  TLS 1.2 not supported by Python install; '
                    'network connections lack modern security\n'))
     if 'sni' not in security:
         fm.plain(_('  SNI not supported by Python install; may have '
                    'connectivity issues with some servers\n'))
 
     # TODO print CA cert info
 
     # hg version
     hgver = util.version()
     fm.write('hgver', _("checking Mercurial version (%s)\n"),
              hgver.split('+')[0])
     fm.write('hgverextra', _("checking Mercurial custom build (%s)\n"),
              '+'.join(hgver.split('+')[1:]))
 
     # compiled modules
     fm.write('hgmodulepolicy', _("checking module policy (%s)\n"),
              policy.policy)
     fm.write('hgmodules', _("checking installed modules (%s)...\n"),
              os.path.dirname(pycompat.fsencode(__file__)))
 
     if policy.policy in ('c', 'allow'):
         err = None
         try:
             from .cext import (
                 base85,
                 bdiff,
                 mpatch,
                 osutil,
             )
             dir(bdiff), dir(mpatch), dir(base85), dir(osutil) # quiet pyflakes
         except Exception as inst:
             err = util.forcebytestr(inst)
             problems += 1
         fm.condwrite(err, 'extensionserror', " %s\n", err)
 
     compengines = util.compengines._engines.values()
     fm.write('compengines', _('checking registered compression engines (%s)\n'),
              fm.formatlist(sorted(e.name() for e in compengines),
                            name='compengine', fmt='%s', sep=', '))
     fm.write('compenginesavail', _('checking available compression engines '
                                    '(%s)\n'),
              fm.formatlist(sorted(e.name() for e in compengines
                                   if e.available()),
                            name='compengine', fmt='%s', sep=', '))
     wirecompengines = util.compengines.supportedwireengines(util.SERVERROLE)
     fm.write('compenginesserver', _('checking available compression engines '
                                     'for wire protocol (%s)\n'),
              fm.formatlist([e.name() for e in wirecompengines
                             if e.wireprotosupport()],
                            name='compengine', fmt='%s', sep=', '))
 
     # templates
     p = templater.templatepaths()
     fm.write('templatedirs', 'checking templates (%s)...\n', ' '.join(p))
     fm.condwrite(not p, '', _(" no template directories found\n"))
     if p:
         m = templater.templatepath("map-cmdline.default")
         if m:
             # template found, check if it is working
             err = None
             try:
                 templater.templater.frommapfile(m)
             except Exception as inst:
                 err = util.forcebytestr(inst)
                 p = None
             fm.condwrite(err, 'defaulttemplateerror', " %s\n", err)
         else:
             p = None
         fm.condwrite(p, 'defaulttemplate',
                      _("checking default template (%s)\n"), m)
         fm.condwrite(not m, 'defaulttemplatenotfound',
                      _(" template '%s' not found\n"), "default")
     if not p:
         problems += 1
     fm.condwrite(not p, '',
                  _(" (templates seem to have been installed incorrectly)\n"))
 
     # editor
     editor = ui.geteditor()
     editor = util.expandpath(editor)
     fm.write('editor', _("checking commit editor... (%s)\n"), editor)
     cmdpath = util.findexe(pycompat.shlexsplit(editor)[0])
     fm.condwrite(not cmdpath and editor == 'vi', 'vinotfound',
                  _(" No commit editor set and can't find %s in PATH\n"
                    " (specify a commit editor in your configuration"
                    " file)\n"), not cmdpath and editor == 'vi' and editor)
     fm.condwrite(not cmdpath and editor != 'vi', 'editornotfound',
                  _(" Can't find editor '%s' in PATH\n"
                    " (specify a commit editor in your configuration"
                    " file)\n"), not cmdpath and editor)
     if not cmdpath and editor != 'vi':
         problems += 1
 
     # check username
     username = None
     err = None
     try:
         username = ui.username()
     except error.Abort as e:
         err = util.forcebytestr(e)
         problems += 1
 
     fm.condwrite(username, 'username',  _("checking username (%s)\n"), username)
     fm.condwrite(err, 'usernameerror', _("checking username...\n %s\n"
         " (specify a username in your configuration file)\n"), err)
 
     fm.condwrite(not problems, '',
                  _("no problems detected\n"))
     if not problems:
         fm.data(problems=problems)
     fm.condwrite(problems, 'problems',
                  _("%d problems detected,"
                    " please check your install!\n"), problems)
     fm.end()
 
     return problems
 
 @command('debugknown', [], _('REPO ID...'), norepo=True)
 def debugknown(ui, repopath, *ids, **opts):
     """test whether node ids are known to a repo
 
     Every ID must be a full-length hex node id string. Returns a list of 0s
     and 1s indicating unknown/known.
     """
     opts = pycompat.byteskwargs(opts)
     repo = hg.peer(ui, opts, repopath)
     if not repo.capable('known'):
         raise error.Abort("known() not supported by target repository")
     flags = repo.known([bin(s) for s in ids])
     ui.write("%s\n" % ("".join([f and "1" or "0" for f in flags])))
 
 @command('debuglabelcomplete', [], _('LABEL...'))
 def debuglabelcomplete(ui, repo, *args):
     '''backwards compatibility with old bash completion scripts (DEPRECATED)'''
     debugnamecomplete(ui, repo, *args)
 
 @command('debuglocks',
          [('L', 'force-lock', None, _('free the store lock (DANGEROUS)')),
           ('W', 'force-wlock', None,
            _('free the working state lock (DANGEROUS)'))],
          _('[OPTION]...'))
 def debuglocks(ui, repo, **opts):
     """show or modify state of locks
 
     By default, this command will show which locks are held. This
     includes the user and process holding the lock, the amount of time
     the lock has been held, and the machine name where the process is
     running if it's not local.
 
     Locks protect the integrity of Mercurial's data, so should be
     treated with care. System crashes or other interruptions may cause
     locks to not be properly released, though Mercurial will usually
     detect and remove such stale locks automatically.
 
     However, detecting stale locks may not always be possible (for
     instance, on a shared filesystem). Removing locks may also be
     blocked by filesystem permissions.
 
     Returns 0 if no locks are held.
 
     """
 
     if opts.get(r'force_lock'):
         repo.svfs.unlink('lock')
     if opts.get(r'force_wlock'):
         repo.vfs.unlink('wlock')
     if opts.get(r'force_lock') or opts.get(r'force_lock'):
         return 0
 
     now = time.time()
     held = 0
 
     def report(vfs, name, method):
         # this causes stale locks to get reaped for more accurate reporting
         try:
             l = method(False)
         except error.LockHeld:
             l = None
 
         if l:
             l.release()
         else:
             try:
                 stat = vfs.lstat(name)
                 age = now - stat.st_mtime
                 user = util.username(stat.st_uid)
                 locker = vfs.readlock(name)
                 if ":" in locker:
                     host, pid = locker.split(':')
                     if host == socket.gethostname():
                         locker = 'user %s, process %s' % (user, pid)
                     else:
                         locker = 'user %s, process %s, host %s' \
                                  % (user, pid, host)
                 ui.write(("%-6s %s (%ds)\n") % (name + ":", locker, age))
                 return 1
             except OSError as e:
                 if e.errno != errno.ENOENT:
                     raise
 
         ui.write(("%-6s free\n") % (name + ":"))
         return 0
 
     held += report(repo.svfs, "lock", repo.lock)
     held += report(repo.vfs, "wlock", repo.wlock)
 
     return held
 
 @command('debugmergestate', [], '')
 def debugmergestate(ui, repo, *args):
     """print merge state
 
     Use --verbose to print out information about whether v1 or v2 merge state
     was chosen."""
     def _hashornull(h):
         if h == nullhex:
             return 'null'
         else:
             return h
 
     def printrecords(version):
         ui.write(('* version %s records\n') % version)
         if version == 1:
             records = v1records
         else:
             records = v2records
 
         for rtype, record in records:
             # pretty print some record types
             if rtype == 'L':
                 ui.write(('local: %s\n') % record)
             elif rtype == 'O':
                 ui.write(('other: %s\n') % record)
             elif rtype == 'm':
                 driver, mdstate = record.split('\0', 1)
                 ui.write(('merge driver: %s (state "%s")\n')
                          % (driver, mdstate))
             elif rtype in 'FDC':
                 r = record.split('\0')
                 f, state, hash, lfile, afile, anode, ofile = r[0:7]
                 if version == 1:
                     onode = 'not stored in v1 format'
                     flags = r[7]
                 else:
                     onode, flags = r[7:9]
                 ui.write(('file: %s (record type "%s", state "%s", hash %s)\n')
                          % (f, rtype, state, _hashornull(hash)))
                 ui.write(('  local path: %s (flags "%s")\n') % (lfile, flags))
                 ui.write(('  ancestor path: %s (node %s)\n')
                          % (afile, _hashornull(anode)))
                 ui.write(('  other path: %s (node %s)\n')
                          % (ofile, _hashornull(onode)))
             elif rtype == 'f':
                 filename, rawextras = record.split('\0', 1)
                 extras = rawextras.split('\0')
                 i = 0
                 extrastrings = []
                 while i < len(extras):
                     extrastrings.append('%s = %s' % (extras[i], extras[i + 1]))
                     i += 2
 
                 ui.write(('file extras: %s (%s)\n')
                          % (filename, ', '.join(extrastrings)))
             elif rtype == 'l':
                 labels = record.split('\0', 2)
                 labels = [l for l in labels if len(l) > 0]
                 ui.write(('labels:\n'))
                 ui.write(('  local: %s\n' % labels[0]))
                 ui.write(('  other: %s\n' % labels[1]))
                 if len(labels) > 2:
                     ui.write(('  base:  %s\n' % labels[2]))
             else:
                 ui.write(('unrecognized entry: %s\t%s\n')
                          % (rtype, record.replace('\0', '\t')))
 
     # Avoid mergestate.read() since it may raise an exception for unsupported
     # merge state records. We shouldn't be doing this, but this is OK since this
     # command is pretty low-level.
     ms = mergemod.mergestate(repo)
 
     # sort so that reasonable information is on top
     v1records = ms._readrecordsv1()
     v2records = ms._readrecordsv2()
     order = 'LOml'
     def key(r):
         idx = order.find(r[0])
         if idx == -1:
             return (1, r[1])
         else:
             return (0, idx)
     v1records.sort(key=key)
     v2records.sort(key=key)
 
     if not v1records and not v2records:
         ui.write(('no merge state found\n'))
     elif not v2records:
         ui.note(('no version 2 merge state\n'))
         printrecords(1)
     elif ms._v1v2match(v1records, v2records):
         ui.note(('v1 and v2 states match: using v2\n'))
         printrecords(2)
     else:
         ui.note(('v1 and v2 states mismatch: using v1\n'))
         printrecords(1)
         if ui.verbose:
             printrecords(2)
 
 @command('debugnamecomplete', [], _('NAME...'))
 def debugnamecomplete(ui, repo, *args):
     '''complete "names" - tags, open branch names, bookmark names'''
 
     names = set()
     # since we previously only listed open branches, we will handle that
     # specially (after this for loop)
     for name, ns in repo.names.iteritems():
         if name != 'branches':
             names.update(ns.listnames(repo))
     names.update(tag for (tag, heads, tip, closed)
                  in repo.branchmap().iterbranches() if not closed)
     completions = set()
     if not args:
         args = ['']
     for a in args:
         completions.update(n for n in names if n.startswith(a))
     ui.write('\n'.join(sorted(completions)))
     ui.write('\n')
 
 @command('debugobsolete',
         [('', 'flags', 0, _('markers flag')),
          ('', 'record-parents', False,
           _('record parent information for the precursor')),
          ('r', 'rev', [], _('display markers relevant to REV')),
          ('', 'exclusive', False, _('restrict display to markers only '
                                     'relevant to REV')),
          ('', 'index', False, _('display index of the marker')),
          ('', 'delete', [], _('delete markers specified by indices')),
         ] + cmdutil.commitopts2 + cmdutil.formatteropts,
          _('[OBSOLETED [REPLACEMENT ...]]'))
 def debugobsolete(ui, repo, precursor=None, *successors, **opts):
     """create arbitrary obsolete marker
 
     With no arguments, displays the list of obsolescence markers."""
 
     opts = pycompat.byteskwargs(opts)
 
     def parsenodeid(s):
         try:
             # We do not use revsingle/revrange functions here to accept
             # arbitrary node identifiers, possibly not present in the
             # local repository.
             n = bin(s)
             if len(n) != len(nullid):
                 raise TypeError()
             return n
         except TypeError:
             raise error.Abort('changeset references must be full hexadecimal '
                              'node identifiers')
 
     if opts.get('delete'):
         indices = []
         for v in opts.get('delete'):
             try:
                 indices.append(int(v))
             except ValueError:
                 raise error.Abort(_('invalid index value: %r') % v,
                                   hint=_('use integers for indices'))
 
         if repo.currenttransaction():
             raise error.Abort(_('cannot delete obsmarkers in the middle '
                                 'of transaction.'))
 
         with repo.lock():
             n = repair.deleteobsmarkers(repo.obsstore, indices)
             ui.write(_('deleted %i obsolescence markers\n') % n)
 
         return
 
     if precursor is not None:
         if opts['rev']:
             raise error.Abort('cannot select revision when creating marker')
         metadata = {}
         metadata['user'] = opts['user'] or ui.username()
         succs = tuple(parsenodeid(succ) for succ in successors)
         l = repo.lock()
         try:
             tr = repo.transaction('debugobsolete')
             try:
                 date = opts.get('date')
                 if date:
                     date = util.parsedate(date)
                 else:
                     date = None
                 prec = parsenodeid(precursor)
                 parents = None
                 if opts['record_parents']:
                     if prec not in repo.unfiltered():
                         raise error.Abort('cannot used --record-parents on '
                                          'unknown changesets')
                     parents = repo.unfiltered()[prec].parents()
                     parents = tuple(p.node() for p in parents)
                 repo.obsstore.create(tr, prec, succs, opts['flags'],
                                      parents=parents, date=date,
                                      metadata=metadata, ui=ui)
                 tr.close()
             except ValueError as exc:
                 raise error.Abort(_('bad obsmarker input: %s') % exc)
             finally:
                 tr.release()
         finally:
             l.release()
     else:
         if opts['rev']:
             revs = scmutil.revrange(repo, opts['rev'])
             nodes = [repo[r].node() for r in revs]
             markers = list(obsutil.getmarkers(repo, nodes=nodes,
                                                exclusive=opts['exclusive']))
             markers.sort(key=lambda x: x._data)
         else:
             markers = obsutil.getmarkers(repo)
 
         markerstoiter = markers
         isrelevant = lambda m: True
         if opts.get('rev') and opts.get('index'):
             markerstoiter = obsutil.getmarkers(repo)
             markerset = set(markers)
             isrelevant = lambda m: m in markerset
 
         fm = ui.formatter('debugobsolete', opts)
         for i, m in enumerate(markerstoiter):
             if not isrelevant(m):
                 # marker can be irrelevant when we're iterating over a set
                 # of markers (markerstoiter) which is bigger than the set
                 # of markers we want to display (markers)
                 # this can happen if both --index and --rev options are
                 # provided and thus we need to iterate over all of the markers
                 # to get the correct indices, but only display the ones that
                 # are relevant to --rev value
                 continue
             fm.startitem()
             ind = i if opts.get('index') else None
             cmdutil.showmarker(fm, m, index=ind)
         fm.end()
 
 @command('debugpathcomplete',
          [('f', 'full', None, _('complete an entire path')),
           ('n', 'normal', None, _('show only normal files')),
           ('a', 'added', None, _('show only added files')),
           ('r', 'removed', None, _('show only removed files'))],
          _('FILESPEC...'))
 def debugpathcomplete(ui, repo, *specs, **opts):
     '''complete part or all of a tracked path
 
     This command supports shells that offer path name completion. It
     currently completes only files already known to the dirstate.
 
     Completion extends only to the next path segment unless
     --full is specified, in which case entire paths are used.'''
 
     def complete(path, acceptable):
         dirstate = repo.dirstate
         spec = os.path.normpath(os.path.join(pycompat.getcwd(), path))
         rootdir = repo.root + pycompat.ossep
         if spec != repo.root and not spec.startswith(rootdir):
             return [], []
         if os.path.isdir(spec):
             spec += '/'
         spec = spec[len(rootdir):]
         fixpaths = pycompat.ossep != '/'
         if fixpaths:
             spec = spec.replace(pycompat.ossep, '/')
         speclen = len(spec)
         fullpaths = opts[r'full']
         files, dirs = set(), set()
         adddir, addfile = dirs.add, files.add
         for f, st in dirstate.iteritems():
             if f.startswith(spec) and st[0] in acceptable:
                 if fixpaths:
                     f = f.replace('/', pycompat.ossep)
                 if fullpaths:
                     addfile(f)
                     continue
                 s = f.find(pycompat.ossep, speclen)
                 if s >= 0:
                     adddir(f[:s])
                 else:
                     addfile(f)
         return files, dirs
 
     acceptable = ''
     if opts[r'normal']:
         acceptable += 'nm'
     if opts[r'added']:
         acceptable += 'a'
     if opts[r'removed']:
         acceptable += 'r'
     cwd = repo.getcwd()
     if not specs:
         specs = ['.']
 
     files, dirs = set(), set()
     for spec in specs:
         f, d = complete(spec, acceptable or 'nmar')
         files.update(f)
         dirs.update(d)
     files.update(dirs)
     ui.write('\n'.join(repo.pathto(p, cwd) for p in sorted(files)))
     ui.write('\n')
 
 @command('debugpickmergetool',
         [('r', 'rev', '', _('check for files in this revision'), _('REV')),
          ('', 'changedelete', None, _('emulate merging change and delete')),
         ] + cmdutil.walkopts + cmdutil.mergetoolopts,
         _('[PATTERN]...'),
         inferrepo=True)
 def debugpickmergetool(ui, repo, *pats, **opts):
     """examine which merge tool is chosen for specified file
 
     As described in :hg:`help merge-tools`, Mercurial examines
     configurations below in this order to decide which merge tool is
     chosen for specified file.
 
     1. ``--tool`` option
     2. ``HGMERGE`` environment variable
     3. configurations in ``merge-patterns`` section
     4. configuration of ``ui.merge``
     5. configurations in ``merge-tools`` section
     6. ``hgmerge`` tool (for historical reason only)
     7. default tool for fallback (``:merge`` or ``:prompt``)
 
     This command writes out examination result in the style below::
 
         FILE = MERGETOOL
 
     By default, all files known in the first parent context of the
     working directory are examined. Use file patterns and/or -I/-X
     options to limit target files. -r/--rev is also useful to examine
     files in another context without actual updating to it.
 
     With --debug, this command shows warning messages while matching
     against ``merge-patterns`` and so on, too. It is recommended to
     use this option with explicit file patterns and/or -I/-X options,
     because this option increases amount of output per file according
     to configurations in hgrc.
 
     With -v/--verbose, this command shows configurations below at
     first (only if specified).
 
     - ``--tool`` option
     - ``HGMERGE`` environment variable
     - configuration of ``ui.merge``
 
     If merge tool is chosen before matching against
     ``merge-patterns``, this command can't show any helpful
     information, even with --debug. In such case, information above is
     useful to know why a merge tool is chosen.
     """
     opts = pycompat.byteskwargs(opts)
     overrides = {}
     if opts['tool']:
         overrides[('ui', 'forcemerge')] = opts['tool']
         ui.note(('with --tool %r\n') % (opts['tool']))
 
     with ui.configoverride(overrides, 'debugmergepatterns'):
         hgmerge = encoding.environ.get("HGMERGE")
         if hgmerge is not None:
             ui.note(('with HGMERGE=%r\n') % (hgmerge))
         uimerge = ui.config("ui", "merge")
         if uimerge:
             ui.note(('with ui.merge=%r\n') % (uimerge))
 
         ctx = scmutil.revsingle(repo, opts.get('rev'))
         m = scmutil.match(ctx, pats, opts)
         changedelete = opts['changedelete']
         for path in ctx.walk(m):
             fctx = ctx[path]
             try:
                 if not ui.debugflag:
                     ui.pushbuffer(error=True)
                 tool, toolpath = filemerge._picktool(repo, ui, path,
                                                      fctx.isbinary(),
                                                      'l' in fctx.flags(),
                                                      changedelete)
             finally:
                 if not ui.debugflag:
                     ui.popbuffer()
             ui.write(('%s = %s\n') % (path, tool))
 
 @command('debugpushkey', [], _('REPO NAMESPACE [KEY OLD NEW]'), norepo=True)
 def debugpushkey(ui, repopath, namespace, *keyinfo, **opts):
     '''access the pushkey key/value protocol
 
     With two args, list the keys in the given namespace.
 
     With five args, set a key to new if it currently is set to old.
     Reports success or failure.
     '''
 
     target = hg.peer(ui, {}, repopath)
     if keyinfo:
         key, old, new = keyinfo
         r = target.pushkey(namespace, key, old, new)
         ui.status(str(r) + '\n')
         return not r
     else:
         for k, v in sorted(target.listkeys(namespace).iteritems()):
             ui.write("%s\t%s\n" % (util.escapestr(k),
                                    util.escapestr(v)))
 
 @command('debugpvec', [], _('A B'))
 def debugpvec(ui, repo, a, b=None):
     ca = scmutil.revsingle(repo, a)
     cb = scmutil.revsingle(repo, b)
     pa = pvec.ctxpvec(ca)
     pb = pvec.ctxpvec(cb)
     if pa == pb:
         rel = "="
     elif pa > pb:
         rel = ">"
     elif pa < pb:
         rel = "<"
     elif pa | pb:
         rel = "|"
     ui.write(_("a: %s\n") % pa)
     ui.write(_("b: %s\n") % pb)
     ui.write(_("depth(a): %d depth(b): %d\n") % (pa._depth, pb._depth))
     ui.write(_("delta: %d hdist: %d distance: %d relation: %s\n") %
              (abs(pa._depth - pb._depth), pvec._hamming(pa._vec, pb._vec),
               pa.distance(pb), rel))
 
 @command('debugrebuilddirstate|debugrebuildstate',
     [('r', 'rev', '', _('revision to rebuild to'), _('REV')),
      ('', 'minimal', None, _('only rebuild files that are inconsistent with '
                              'the working copy parent')),
     ],
     _('[-r REV]'))
 def debugrebuilddirstate(ui, repo, rev, **opts):
     """rebuild the dirstate as it would look like for the given revision
 
     If no revision is specified the first current parent will be used.
 
     The dirstate will be set to the files of the given revision.
     The actual working directory content or existing dirstate
     information such as adds or removes is not considered.
 
     ``minimal`` will only rebuild the dirstate status for files that claim to be
     tracked but are not in the parent manifest, or that exist in the parent
     manifest but are not in the dirstate. It will not change adds, removes, or
     modified files that are in the working copy parent.
 
     One use of this command is to make the next :hg:`status` invocation
     check the actual file content.
     """
     ctx = scmutil.revsingle(repo, rev)
     with repo.wlock():
         dirstate = repo.dirstate
         changedfiles = None
         # See command doc for what minimal does.
         if opts.get(r'minimal'):
             manifestfiles = set(ctx.manifest().keys())
             dirstatefiles = set(dirstate)
             manifestonly = manifestfiles - dirstatefiles
             dsonly = dirstatefiles - manifestfiles
             dsnotadded = set(f for f in dsonly if dirstate[f] != 'a')
             changedfiles = manifestonly | dsnotadded
 
         dirstate.rebuild(ctx.node(), ctx.manifest(), changedfiles)
 
 @command('debugrebuildfncache', [], '')
 def debugrebuildfncache(ui, repo):
     """rebuild the fncache file"""
     repair.rebuildfncache(ui, repo)
 
 @command('debugrename',
     [('r', 'rev', '', _('revision to debug'), _('REV'))],
     _('[-r REV] FILE'))
 def debugrename(ui, repo, file1, *pats, **opts):
     """dump rename information"""
 
     opts = pycompat.byteskwargs(opts)
     ctx = scmutil.revsingle(repo, opts.get('rev'))
     m = scmutil.match(ctx, (file1,) + pats, opts)
     for abs in ctx.walk(m):
         fctx = ctx[abs]
         o = fctx.filelog().renamed(fctx.filenode())
         rel = m.rel(abs)
         if o:
             ui.write(_("%s renamed from %s:%s\n") % (rel, o[0], hex(o[1])))
         else:
             ui.write(_("%s not renamed\n") % rel)
 
 @command('debugrevlog', cmdutil.debugrevlogopts +
     [('d', 'dump', False, _('dump index data'))],
     _('-c|-m|FILE'),
     optionalrepo=True)
 def debugrevlog(ui, repo, file_=None, **opts):
     """show data and statistics about a revlog"""
     opts = pycompat.byteskwargs(opts)
     r = cmdutil.openrevlog(repo, 'debugrevlog', file_, opts)
 
     if opts.get("dump"):
         numrevs = len(r)
         ui.write(("# rev p1rev p2rev start   end deltastart base   p1   p2"
                  " rawsize totalsize compression heads chainlen\n"))
         ts = 0
         heads = set()
 
         for rev in xrange(numrevs):
             dbase = r.deltaparent(rev)
             if dbase == -1:
                 dbase = rev
             cbase = r.chainbase(rev)
             clen = r.chainlen(rev)
             p1, p2 = r.parentrevs(rev)
             rs = r.rawsize(rev)
             ts = ts + rs
             heads -= set(r.parentrevs(rev))
             heads.add(rev)
             try:
                 compression = ts / r.end(rev)
             except ZeroDivisionError:
                 compression = 0
             ui.write("%5d %5d %5d %5d %5d %10d %4d %4d %4d %7d %9d "
                      "%11d %5d %8d\n" %
                      (rev, p1, p2, r.start(rev), r.end(rev),
                       r.start(dbase), r.start(cbase),
                       r.start(p1), r.start(p2),
                       rs, ts, compression, len(heads), clen))
         return 0
 
     v = r.version
     format = v & 0xFFFF
     flags = []
     gdelta = False
     if v & revlog.FLAG_INLINE_DATA:
         flags.append('inline')
     if v & revlog.FLAG_GENERALDELTA:
         gdelta = True
         flags.append('generaldelta')
     if not flags:
         flags = ['(none)']
 
     nummerges = 0
     numfull = 0
     numprev = 0
     nump1 = 0
     nump2 = 0
     numother = 0
     nump1prev = 0
     nump2prev = 0
     chainlengths = []
     chainbases = []
     chainspans = []
 
     datasize = [None, 0, 0]
     fullsize = [None, 0, 0]
     deltasize = [None, 0, 0]
     chunktypecounts = {}
     chunktypesizes = {}
 
     def addsize(size, l):
         if l[0] is None or size < l[0]:
             l[0] = size
         if size > l[1]:
             l[1] = size
         l[2] += size
 
     numrevs = len(r)
     for rev in xrange(numrevs):
         p1, p2 = r.parentrevs(rev)
         delta = r.deltaparent(rev)
         if format > 0:
             addsize(r.rawsize(rev), datasize)
         if p2 != nullrev:
             nummerges += 1
         size = r.length(rev)
         if delta == nullrev:
             chainlengths.append(0)
             chainbases.append(r.start(rev))
             chainspans.append(size)
             numfull += 1
             addsize(size, fullsize)
         else:
             chainlengths.append(chainlengths[delta] + 1)
             baseaddr = chainbases[delta]
             revaddr = r.start(rev)
             chainbases.append(baseaddr)
             chainspans.append((revaddr - baseaddr) + size)
             addsize(size, deltasize)
             if delta == rev - 1:
                 numprev += 1
                 if delta == p1:
                     nump1prev += 1
                 elif delta == p2:
                     nump2prev += 1
             elif delta == p1:
                 nump1 += 1
             elif delta == p2:
                 nump2 += 1
             elif delta != nullrev:
                 numother += 1
 
         # Obtain data on the raw chunks in the revlog.
         segment = r._getsegmentforrevs(rev, rev)[1]
         if segment:
             chunktype = bytes(segment[0:1])
         else:
             chunktype = 'empty'
 
         if chunktype not in chunktypecounts:
             chunktypecounts[chunktype] = 0
             chunktypesizes[chunktype] = 0
 
         chunktypecounts[chunktype] += 1
         chunktypesizes[chunktype] += size
 
     # Adjust size min value for empty cases
     for size in (datasize, fullsize, deltasize):
         if size[0] is None:
             size[0] = 0
 
     numdeltas = numrevs - numfull
     numoprev = numprev - nump1prev - nump2prev
     totalrawsize = datasize[2]
     datasize[2] /= numrevs
     fulltotal = fullsize[2]
     fullsize[2] /= numfull
     deltatotal = deltasize[2]
     if numrevs - numfull > 0:
         deltasize[2] /= numrevs - numfull
     totalsize = fulltotal + deltatotal
     avgchainlen = sum(chainlengths) / numrevs
     maxchainlen = max(chainlengths)
     maxchainspan = max(chainspans)
     compratio = 1
     if totalsize:
         compratio = totalrawsize / totalsize
 
     basedfmtstr = '%%%dd\n'
     basepcfmtstr = '%%%dd %s(%%5.2f%%%%)\n'
 
     def dfmtstr(max):
         return basedfmtstr % len(str(max))
     def pcfmtstr(max, padding=0):
         return basepcfmtstr % (len(str(max)), ' ' * padding)
 
     def pcfmt(value, total):
         if total:
             return (value, 100 * float(value) / total)
         else:
             return value, 100.0
 
     ui.write(('format : %d\n') % format)
     ui.write(('flags  : %s\n') % ', '.join(flags))
 
     ui.write('\n')
     fmt = pcfmtstr(totalsize)
     fmt2 = dfmtstr(totalsize)
     ui.write(('revisions     : ') + fmt2 % numrevs)
     ui.write(('    merges    : ') + fmt % pcfmt(nummerges, numrevs))
     ui.write(('    normal    : ') + fmt % pcfmt(numrevs - nummerges, numrevs))
     ui.write(('revisions     : ') + fmt2 % numrevs)
     ui.write(('    full      : ') + fmt % pcfmt(numfull, numrevs))
     ui.write(('    deltas    : ') + fmt % pcfmt(numdeltas, numrevs))
     ui.write(('revision size : ') + fmt2 % totalsize)
     ui.write(('    full      : ') + fmt % pcfmt(fulltotal, totalsize))
     ui.write(('    deltas    : ') + fmt % pcfmt(deltatotal, totalsize))
 
     def fmtchunktype(chunktype):
         if chunktype == 'empty':
             return '    %s     : ' % chunktype
         elif chunktype in pycompat.bytestr(string.ascii_letters):
             return '    0x%s (%s)  : ' % (hex(chunktype), chunktype)
         else:
             return '    0x%s      : ' % hex(chunktype)
 
     ui.write('\n')
     ui.write(('chunks        : ') + fmt2 % numrevs)
     for chunktype in sorted(chunktypecounts):
         ui.write(fmtchunktype(chunktype))
         ui.write(fmt % pcfmt(chunktypecounts[chunktype], numrevs))
     ui.write(('chunks size   : ') + fmt2 % totalsize)
     for chunktype in sorted(chunktypecounts):
         ui.write(fmtchunktype(chunktype))
         ui.write(fmt % pcfmt(chunktypesizes[chunktype], totalsize))
 
     ui.write('\n')
     fmt = dfmtstr(max(avgchainlen, maxchainlen, maxchainspan, compratio))
     ui.write(('avg chain length  : ') + fmt % avgchainlen)
     ui.write(('max chain length  : ') + fmt % maxchainlen)
     ui.write(('max chain reach   : ') + fmt % maxchainspan)
     ui.write(('compression ratio : ') + fmt % compratio)
 
     if format > 0:
         ui.write('\n')
         ui.write(('uncompressed data size (min/max/avg) : %d / %d / %d\n')
                  % tuple(datasize))
     ui.write(('full revision size (min/max/avg)     : %d / %d / %d\n')
              % tuple(fullsize))
     ui.write(('delta size (min/max/avg)             : %d / %d / %d\n')
              % tuple(deltasize))
 
     if numdeltas > 0:
         ui.write('\n')
         fmt = pcfmtstr(numdeltas)
         fmt2 = pcfmtstr(numdeltas, 4)
         ui.write(('deltas against prev  : ') + fmt % pcfmt(numprev, numdeltas))
         if numprev > 0:
             ui.write(('    where prev = p1  : ') + fmt2 % pcfmt(nump1prev,
                                                               numprev))
             ui.write(('    where prev = p2  : ') + fmt2 % pcfmt(nump2prev,
                                                               numprev))
             ui.write(('    other            : ') + fmt2 % pcfmt(numoprev,
                                                               numprev))
         if gdelta:
             ui.write(('deltas against p1    : ')
                      + fmt % pcfmt(nump1, numdeltas))
             ui.write(('deltas against p2    : ')
                      + fmt % pcfmt(nump2, numdeltas))
             ui.write(('deltas against other : ') + fmt % pcfmt(numother,
                                                              numdeltas))
 
 @command('debugrevspec',
     [('', 'optimize', None,
       _('print parsed tree after optimizing (DEPRECATED)')),
      ('', 'show-revs', True, _('print list of result revisions (default)')),
      ('s', 'show-set', None, _('print internal representation of result set')),
      ('p', 'show-stage', [],
       _('print parsed tree at the given stage'), _('NAME')),
      ('', 'no-optimized', False, _('evaluate tree without optimization')),
      ('', 'verify-optimized', False, _('verify optimized result')),
      ],
     ('REVSPEC'))
 def debugrevspec(ui, repo, expr, **opts):
     """parse and apply a revision specification
 
     Use -p/--show-stage option to print the parsed tree at the given stages.
     Use -p all to print tree at every stage.
 
     Use --no-show-revs option with -s or -p to print only the set
     representation or the parsed tree respectively.
 
     Use --verify-optimized to compare the optimized result with the unoptimized
     one. Returns 1 if the optimized result differs.
     """
     opts = pycompat.byteskwargs(opts)
     aliases = ui.configitems('revsetalias')
     stages = [
         ('parsed', lambda tree: tree),
         ('expanded', lambda tree: revsetlang.expandaliases(tree, aliases,
                                                            ui.warn)),
         ('concatenated', revsetlang.foldconcat),
         ('analyzed', revsetlang.analyze),
         ('optimized', revsetlang.optimize),
     ]
     if opts['no_optimized']:
         stages = stages[:-1]
     if opts['verify_optimized'] and opts['no_optimized']:
         raise error.Abort(_('cannot use --verify-optimized with '
                             '--no-optimized'))
     stagenames = set(n for n, f in stages)
 
     showalways = set()
     showchanged = set()
     if ui.verbose and not opts['show_stage']:
         # show parsed tree by --verbose (deprecated)
         showalways.add('parsed')
         showchanged.update(['expanded', 'concatenated'])
         if opts['optimize']:
             showalways.add('optimized')
     if opts['show_stage'] and opts['optimize']:
         raise error.Abort(_('cannot use --optimize with --show-stage'))
     if opts['show_stage'] == ['all']:
         showalways.update(stagenames)
     else:
         for n in opts['show_stage']:
             if n not in stagenames:
                 raise error.Abort(_('invalid stage name: %s') % n)
         showalways.update(opts['show_stage'])
 
     treebystage = {}
     printedtree = None
     tree = revsetlang.parse(expr, lookup=repo.__contains__)
     for n, f in stages:
         treebystage[n] = tree = f(tree)
         if n in showalways or (n in showchanged and tree != printedtree):
             if opts['show_stage'] or n != 'parsed':
                 ui.write(("* %s:\n") % n)
             ui.write(revsetlang.prettyformat(tree), "\n")
             printedtree = tree
 
     if opts['verify_optimized']:
         arevs = revset.makematcher(treebystage['analyzed'])(repo)
         brevs = revset.makematcher(treebystage['optimized'])(repo)
         if opts['show_set'] or (opts['show_set'] is None and ui.verbose):
             ui.write(("* analyzed set:\n"), smartset.prettyformat(arevs), "\n")
             ui.write(("* optimized set:\n"), smartset.prettyformat(brevs), "\n")
         arevs = list(arevs)
         brevs = list(brevs)
         if arevs == brevs:
             return 0
         ui.write(('--- analyzed\n'), label='diff.file_a')
         ui.write(('+++ optimized\n'), label='diff.file_b')
         sm = difflib.SequenceMatcher(None, arevs, brevs)
         for tag, alo, ahi, blo, bhi in sm.get_opcodes():
             if tag in ('delete', 'replace'):
                 for c in arevs[alo:ahi]:
                     ui.write('-%s\n' % c, label='diff.deleted')
             if tag in ('insert', 'replace'):
                 for c in brevs[blo:bhi]:
                     ui.write('+%s\n' % c, label='diff.inserted')
             if tag == 'equal':
                 for c in arevs[alo:ahi]:
                     ui.write(' %s\n' % c)
         return 1
 
     func = revset.makematcher(tree)
     revs = func(repo)
     if opts['show_set'] or (opts['show_set'] is None and ui.verbose):
         ui.write(("* set:\n"), smartset.prettyformat(revs), "\n")
     if not opts['show_revs']:
         return
     for c in revs:
         ui.write("%s\n" % c)
 
 @command('debugsetparents', [], _('REV1 [REV2]'))
 def debugsetparents(ui, repo, rev1, rev2=None):
     """manually set the parents of the current working directory
 
     This is useful for writing repository conversion tools, but should
     be used with care. For example, neither the working directory nor the
     dirstate is updated, so file status may be incorrect after running this
     command.
 
     Returns 0 on success.
     """
 
     r1 = scmutil.revsingle(repo, rev1).node()
     r2 = scmutil.revsingle(repo, rev2, 'null').node()
 
     with repo.wlock():
         repo.setparents(r1, r2)
 
 @command('debugssl', [], '[SOURCE]', optionalrepo=True)
 def debugssl(ui, repo, source=None, **opts):
     '''test a secure connection to a server
 
     This builds the certificate chain for the server on Windows, installing the
     missing intermediates and trusted root via Windows Update if necessary.  It
     does nothing on other platforms.
 
     If SOURCE is omitted, the 'default' path will be used.  If a URL is given,
     that server is used. See :hg:`help urls` for more information.
 
     If the update succeeds, retry the original operation.  Otherwise, the cause
     of the SSL error is likely another issue.
     '''
     if not pycompat.iswindows:
         raise error.Abort(_('certificate chain building is only possible on '
                             'Windows'))
 
     if not source:
         if not repo:
             raise error.Abort(_("there is no Mercurial repository here, and no "
                                 "server specified"))
         source = "default"
 
     source, branches = hg.parseurl(ui.expandpath(source))
     url = util.url(source)
     addr = None
 
     if url.scheme == 'https':
         addr = (url.host, url.port or 443)
     elif url.scheme == 'ssh':
         addr = (url.host, url.port or 22)
     else:
         raise error.Abort(_("only https and ssh connections are supported"))
 
     from . import win32
 
     s = ssl.wrap_socket(socket.socket(), ssl_version=ssl.PROTOCOL_TLS,
                         cert_reqs=ssl.CERT_NONE, ca_certs=None)
 
     try:
         s.connect(addr)
         cert = s.getpeercert(True)
 
         ui.status(_('checking the certificate chain for %s\n') % url.host)
 
         complete = win32.checkcertificatechain(cert, build=False)
 
         if not complete:
             ui.status(_('certificate chain is incomplete, updating... '))
 
             if not win32.checkcertificatechain(cert):
                 ui.status(_('failed.\n'))
             else:
                 ui.status(_('done.\n'))
         else:
             ui.status(_('full certificate chain is available\n'))
     finally:
         s.close()
 
 @command('debugsub',
     [('r', 'rev', '',
      _('revision to check'), _('REV'))],
     _('[-r REV] [REV]'))
 def debugsub(ui, repo, rev=None):
     ctx = scmutil.revsingle(repo, rev, None)
     for k, v in sorted(ctx.substate.items()):
         ui.write(('path %s\n') % k)
         ui.write((' source   %s\n') % v[0])
         ui.write((' revision %s\n') % v[1])
 
 @command('debugsuccessorssets',
     [('', 'closest', False, _('return closest successors sets only'))],
     _('[REV]'))
 def debugsuccessorssets(ui, repo, *revs, **opts):
     """show set of successors for revision
 
     A successors set of changeset A is a consistent group of revisions that
     succeed A. It contains non-obsolete changesets only unless closests
     successors set is set.
 
     In most cases a changeset A has a single successors set containing a single
     successor (changeset A replaced by A').
 
     A changeset that is made obsolete with no successors are called "pruned".
     Such changesets have no successors sets at all.
 
     A changeset that has been "split" will have a successors set containing
     more than one successor.
 
     A changeset that has been rewritten in multiple different ways is called
     "divergent". Such changesets have multiple successor sets (each of which
     may also be split, i.e. have multiple successors).
 
     Results are displayed as follows::
 
         <rev1>
             <successors-1A>
         <rev2>
             <successors-2A>
             <successors-2B1> <successors-2B2> <successors-2B3>
 
     Here rev2 has two possible (i.e. divergent) successors sets. The first
     holds one element, whereas the second holds three (i.e. the changeset has
     been split).
     """
     # passed to successorssets caching computation from one call to another
     cache = {}
     ctx2str = str
     node2str = short
     if ui.debug():
         def ctx2str(ctx):
             return ctx.hex()
         node2str = hex
     for rev in scmutil.revrange(repo, revs):
         ctx = repo[rev]
         ui.write('%s\n'% ctx2str(ctx))
         for succsset in obsutil.successorssets(repo, ctx.node(),
                                                 closest=opts['closest'],
                                                 cache=cache):
             if succsset:
                 ui.write('    ')
                 ui.write(node2str(succsset[0]))
                 for node in succsset[1:]:
                     ui.write(' ')
                     ui.write(node2str(node))
             ui.write('\n')
 
 @command('debugtemplate',
     [('r', 'rev', [], _('apply template on changesets'), _('REV')),
      ('D', 'define', [], _('define template keyword'), _('KEY=VALUE'))],
     _('[-r REV]... [-D KEY=VALUE]... TEMPLATE'),
     optionalrepo=True)
 def debugtemplate(ui, repo, tmpl, **opts):
     """parse and apply a template
 
     If -r/--rev is given, the template is processed as a log template and
     applied to the given changesets. Otherwise, it is processed as a generic
     template.
 
     Use --verbose to print the parsed tree.
     """
     revs = None
     if opts[r'rev']:
         if repo is None:
             raise error.RepoError(_('there is no Mercurial repository here '
                                     '(.hg not found)'))
         revs = scmutil.revrange(repo, opts[r'rev'])
 
     props = {}
     for d in opts[r'define']:
         try:
             k, v = (e.strip() for e in d.split('=', 1))
             if not k or k == 'ui':
                 raise ValueError
             props[k] = v
         except ValueError:
             raise error.Abort(_('malformed keyword definition: %s') % d)
 
     if ui.verbose:
         aliases = ui.configitems('templatealias')
         tree = templater.parse(tmpl)
         ui.note(templater.prettyformat(tree), '\n')
         newtree = templater.expandaliases(tree, aliases)
         if newtree != tree:
             ui.note(("* expanded:\n"), templater.prettyformat(newtree), '\n')
 
     if revs is None:
         t = formatter.maketemplater(ui, tmpl)
         props['ui'] = ui
         ui.write(t.render(props))
     else:
         displayer = cmdutil.makelogtemplater(ui, repo, tmpl)
         for r in revs:
             displayer.show(repo[r], **pycompat.strkwargs(props))
         displayer.close()
 
 @command('debugupdatecaches', [])
 def debugupdatecaches(ui, repo, *pats, **opts):
     """warm all known caches in the repository"""
     with repo.wlock(), repo.lock():
         repo.updatecaches()
 
 @command('debugupgraderepo', [
     ('o', 'optimize', [], _('extra optimization to perform'), _('NAME')),
     ('', 'run', False, _('performs an upgrade')),
 ])
 def debugupgraderepo(ui, repo, run=False, optimize=None):
     """upgrade a repository to use different features
 
     If no arguments are specified, the repository is evaluated for upgrade
     and a list of problems and potential optimizations is printed.
 
     With ``--run``, a repository upgrade is performed. Behavior of the upgrade
     can be influenced via additional arguments. More details will be provided
     by the command output when run without ``--run``.
 
     During the upgrade, the repository will be locked and no writes will be
     allowed.
 
     At the end of the upgrade, the repository may not be readable while new
     repository data is swapped in. This window will be as long as it takes to
     rename some directories inside the ``.hg`` directory. On most machines, this
     should complete almost instantaneously and the chances of a consumer being
     unable to access the repository should be low.
     """
     return upgrade.upgraderepo(ui, repo, run=run, optimize=optimize)
 
 @command('debugwalk', cmdutil.walkopts, _('[OPTION]... [FILE]...'),
          inferrepo=True)
 def debugwalk(ui, repo, *pats, **opts):
     """show how files match on given patterns"""
     opts = pycompat.byteskwargs(opts)
     m = scmutil.match(repo[None], pats, opts)
     ui.write(('matcher: %r\n' % m))
     items = list(repo[None].walk(m))
     if not items:
         return
     f = lambda fn: fn
     if ui.configbool('ui', 'slash') and pycompat.ossep != '/':
         f = lambda fn: util.normpath(fn)
     fmt = 'f  %%-%ds  %%-%ds  %%s' % (
         max([len(abs) for abs in items]),
         max([len(m.rel(abs)) for abs in items]))
     for abs in items:
         line = fmt % (abs, f(m.rel(abs)), m.exact(abs) and 'exact' or '')
         ui.write("%s\n" % line.rstrip())
 
 @command('debugwireargs',
     [('', 'three', '', 'three'),
     ('', 'four', '', 'four'),
     ('', 'five', '', 'five'),
     ] + cmdutil.remoteopts,
     _('REPO [OPTIONS]... [ONE [TWO]]'),
     norepo=True)
 def debugwireargs(ui, repopath, *vals, **opts):
     opts = pycompat.byteskwargs(opts)
     repo = hg.peer(ui, opts, repopath)
     for opt in cmdutil.remoteopts:
         del opts[opt[1]]
     args = {}
     for k, v in opts.iteritems():
         if v:
             args[k] = v
     # run twice to check that we don't mess up the stream for the next command
     res1 = repo.debugwireargs(*vals, **args)
     res2 = repo.debugwireargs(*vals, **args)
     ui.write("%s\n" % res1)
     if res1 != res2:
         ui.warn("%s\n" % res2)

mercurial/mail.py

@@ -1,336 +1,336 b''
 # mail.py - mail sending bits for mercurial
 #
 # Copyright 2006 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import email
 import email.charset
 import email.header
 import email.message
 import os
 import smtplib
 import socket
 import time
 
 from .i18n import _
 from . import (
     encoding,
     error,
     sslutil,
     util,
 )
 
 class STARTTLS(smtplib.SMTP):
     '''Derived class to verify the peer certificate for STARTTLS.
 
     This class allows to pass any keyword arguments to SSL socket creation.
     '''
     def __init__(self, ui, host=None, **kwargs):
         smtplib.SMTP.__init__(self, **kwargs)
         self._ui = ui
         self._host = host
 
     def starttls(self, keyfile=None, certfile=None):
         if not self.has_extn("starttls"):
             msg = "STARTTLS extension not supported by server"
             raise smtplib.SMTPException(msg)
         (resp, reply) = self.docmd("STARTTLS")
         if resp == 220:
             self.sock = sslutil.wrapsocket(self.sock, keyfile, certfile,
                                            ui=self._ui,
                                            serverhostname=self._host)
             self.file = smtplib.SSLFakeFile(self.sock)
             self.helo_resp = None
             self.ehlo_resp = None
             self.esmtp_features = {}
             self.does_esmtp = 0
         return (resp, reply)
 
 class SMTPS(smtplib.SMTP):
     '''Derived class to verify the peer certificate for SMTPS.
 
     This class allows to pass any keyword arguments to SSL socket creation.
     '''
     def __init__(self, ui, keyfile=None, certfile=None, host=None,
                  **kwargs):
         self.keyfile = keyfile
         self.certfile = certfile
         smtplib.SMTP.__init__(self, **kwargs)
         self._host = host
         self.default_port = smtplib.SMTP_SSL_PORT
         self._ui = ui
 
     def _get_socket(self, host, port, timeout):
         if self.debuglevel > 0:
             self._ui.debug('connect: %r\n' % (host, port))
         new_socket = socket.create_connection((host, port), timeout)
         new_socket = sslutil.wrapsocket(new_socket,
                                         self.keyfile, self.certfile,
                                         ui=self._ui,
                                         serverhostname=self._host)
         self.file = smtplib.SSLFakeFile(new_socket)
         return new_socket
 
 def _smtp(ui):
     '''build an smtp connection and return a function to send mail'''
     local_hostname = ui.config('smtp', 'local_hostname')
     tls = ui.config('smtp', 'tls')
     # backward compatible: when tls = true, we use starttls.
     starttls = tls == 'starttls' or util.parsebool(tls)
     smtps = tls == 'smtps'
     if (starttls or smtps) and not util.safehasattr(socket, 'ssl'):
         raise error.Abort(_("can't use TLS: Python SSL support not installed"))
     mailhost = ui.config('smtp', 'host')
     if not mailhost:
         raise error.Abort(_('smtp.host not configured - cannot send mail'))
     if smtps:
         ui.note(_('(using smtps)\n'))
         s = SMTPS(ui, local_hostname=local_hostname, host=mailhost)
     elif starttls:
         s = STARTTLS(ui, local_hostname=local_hostname, host=mailhost)
     else:
         s = smtplib.SMTP(local_hostname=local_hostname)
     if smtps:
         defaultport = 465
     else:
         defaultport = 25
     mailport = util.getport(ui.config('smtp', 'port', defaultport))
     ui.note(_('sending mail: smtp host %s, port %d\n') %
             (mailhost, mailport))
     s.connect(host=mailhost, port=mailport)
     if starttls:
         ui.note(_('(using starttls)\n'))
         s.ehlo()
         s.starttls()
         s.ehlo()
     if starttls or smtps:
         ui.note(_('(verifying remote certificate)\n'))
         sslutil.validatesocket(s.sock)
     username = ui.config('smtp', 'username')
     password = ui.config('smtp', 'password')
     if username and not password:
         password = ui.getpass()
     if username and password:
         ui.note(_('(authenticating to mail server as %s)\n') %
                   (username))
         try:
             s.login(username, password)
         except smtplib.SMTPException as inst:
             raise error.Abort(inst)
 
     def send(sender, recipients, msg):
         try:
             return s.sendmail(sender, recipients, msg)
         except smtplib.SMTPRecipientsRefused as inst:
             recipients = [r[1] for r in inst.recipients.values()]
             raise error.Abort('\n' + '\n'.join(recipients))
         except smtplib.SMTPException as inst:
             raise error.Abort(inst)
 
     return send
 
 def _sendmail(ui, sender, recipients, msg):
     '''send mail using sendmail.'''
     program = ui.config('email', 'method')
     cmdline = '%s -f %s %s' % (program, util.email(sender),
                                ' '.join(map(util.email, recipients)))
     ui.note(_('sending mail: %s\n') % cmdline)
     fp = util.popen(cmdline, 'w')
     fp.write(msg)
     ret = fp.close()
     if ret:
         raise error.Abort('%s %s' % (
             os.path.basename(program.split(None, 1)[0]),
             util.explainexit(ret)[0]))
 
 def _mbox(mbox, sender, recipients, msg):
     '''write mails to mbox'''
     fp = open(mbox, 'ab+')
     # Should be time.asctime(), but Windows prints 2-characters day
     # of month instead of one. Make them print the same thing.
-    date = time.strftime('%a %b %d %H:%M:%S %Y', time.localtime())
+    date = time.strftime(r'%a %b %d %H:%M:%S %Y', time.localtime())
     fp.write('From %s %s\n' % (sender, date))
     fp.write(msg)
     fp.write('\n\n')
     fp.close()
 
 def connect(ui, mbox=None):
     '''make a mail connection. return a function to send mail.
     call as sendmail(sender, list-of-recipients, msg).'''
     if mbox:
         open(mbox, 'wb').close()
         return lambda s, r, m: _mbox(mbox, s, r, m)
     if ui.config('email', 'method') == 'smtp':
         return _smtp(ui)
     return lambda s, r, m: _sendmail(ui, s, r, m)
 
 def sendmail(ui, sender, recipients, msg, mbox=None):
     send = connect(ui, mbox=mbox)
     return send(sender, recipients, msg)
 
 def validateconfig(ui):
     '''determine if we have enough config data to try sending email.'''
     method = ui.config('email', 'method')
     if method == 'smtp':
         if not ui.config('smtp', 'host'):
             raise error.Abort(_('smtp specified as email transport, '
                                'but no smtp host configured'))
     else:
         if not util.findexe(method):
             raise error.Abort(_('%r specified as email transport, '
                                'but not in PATH') % method)
 
 def codec2iana(cs):
     ''''''
     cs = email.charset.Charset(cs).input_charset.lower()
 
     # "latin1" normalizes to "iso8859-1", standard calls for "iso-8859-1"
     if cs.startswith("iso") and not cs.startswith("iso-"):
         return "iso-" + cs[3:]
     return cs
 
 def mimetextpatch(s, subtype='plain', display=False):
     '''Return MIME message suitable for a patch.
     Charset will be detected by first trying to decode as us-ascii, then utf-8,
     and finally the global encodings. If all those fail, fall back to
     ISO-8859-1, an encoding with that allows all byte sequences.
     Transfer encodings will be used if necessary.'''
 
     cs = ['us-ascii', 'utf-8', encoding.encoding, encoding.fallbackencoding]
     if display:
         return mimetextqp(s, subtype, 'us-ascii')
     for charset in cs:
         try:
             s.decode(charset)
             return mimetextqp(s, subtype, codec2iana(charset))
         except UnicodeDecodeError:
             pass
 
     return mimetextqp(s, subtype, "iso-8859-1")
 
 def mimetextqp(body, subtype, charset):
     '''Return MIME message.
     Quoted-printable transfer encoding will be used if necessary.
     '''
     cs = email.charset.Charset(charset)
     msg = email.message.Message()
     msg.set_type('text/' + subtype)
 
     for line in body.splitlines():
         if len(line) > 950:
             cs.body_encoding = email.charset.QP
             break
 
     msg.set_payload(body, cs)
 
     return msg
 
 def _charsets(ui):
     '''Obtains charsets to send mail parts not containing patches.'''
     charsets = [cs.lower() for cs in ui.configlist('email', 'charsets')]
     fallbacks = [encoding.fallbackencoding.lower(),
                  encoding.encoding.lower(), 'utf-8']
     for cs in fallbacks: # find unique charsets while keeping order
         if cs not in charsets:
             charsets.append(cs)
     return [cs for cs in charsets if not cs.endswith('ascii')]
 
 def _encode(ui, s, charsets):
     '''Returns (converted) string, charset tuple.
     Finds out best charset by cycling through sendcharsets in descending
     order. Tries both encoding and fallbackencoding for input. Only as
     last resort send as is in fake ascii.
     Caveat: Do not use for mail parts containing patches!'''
     try:
         s.decode('ascii')
     except UnicodeDecodeError:
         sendcharsets = charsets or _charsets(ui)
         for ics in (encoding.encoding, encoding.fallbackencoding):
             try:
                 u = s.decode(ics)
             except UnicodeDecodeError:
                 continue
             for ocs in sendcharsets:
                 try:
                     return u.encode(ocs), ocs
                 except UnicodeEncodeError:
                     pass
                 except LookupError:
                     ui.warn(_('ignoring invalid sendcharset: %s\n') % ocs)
     # if ascii, or all conversion attempts fail, send (broken) ascii
     return s, 'us-ascii'
 
 def headencode(ui, s, charsets=None, display=False):
     '''Returns RFC-2047 compliant header from given string.'''
     if not display:
         # split into words?
         s, cs = _encode(ui, s, charsets)
         return str(email.header.Header(s, cs))
     return s
 
 def _addressencode(ui, name, addr, charsets=None):
     name = headencode(ui, name, charsets)
     try:
         acc, dom = addr.split('@')
         acc = acc.encode('ascii')
         dom = dom.decode(encoding.encoding).encode('idna')
         addr = '%s@%s' % (acc, dom)
     except UnicodeDecodeError:
         raise error.Abort(_('invalid email address: %s') % addr)
     except ValueError:
         try:
             # too strict?
             addr = addr.encode('ascii')
         except UnicodeDecodeError:
             raise error.Abort(_('invalid local address: %s') % addr)
     return email.Utils.formataddr((name, addr))
 
 def addressencode(ui, address, charsets=None, display=False):
     '''Turns address into RFC-2047 compliant header.'''
     if display or not address:
         return address or ''
     name, addr = email.Utils.parseaddr(address)
     return _addressencode(ui, name, addr, charsets)
 
 def addrlistencode(ui, addrs, charsets=None, display=False):
     '''Turns a list of addresses into a list of RFC-2047 compliant headers.
     A single element of input list may contain multiple addresses, but output
     always has one address per item'''
     if display:
         return [a.strip() for a in addrs if a.strip()]
 
     result = []
     for name, addr in email.Utils.getaddresses(addrs):
         if name or addr:
             result.append(_addressencode(ui, name, addr, charsets))
     return result
 
 def mimeencode(ui, s, charsets=None, display=False):
     '''creates mime text object, encodes it if needed, and sets
     charset and transfer-encoding accordingly.'''
     cs = 'us-ascii'
     if not display:
         s, cs = _encode(ui, s, charsets)
     return mimetextqp(s, 'plain', cs)
 
 def headdecode(s):
     '''Decodes RFC-2047 header'''
     uparts = []
     for part, charset in email.header.decode_header(s):
         if charset is not None:
             try:
                 uparts.append(part.decode(charset))
                 continue
             except UnicodeDecodeError:
                 pass
         try:
             uparts.append(part.decode('UTF-8'))
             continue
         except UnicodeDecodeError:
             pass
         uparts.append(part.decode('ISO-8859-1'))
     return encoding.unitolocal(u' '.join(uparts))