help: minor copy editing for grammar

hgext/share.py

@@ -1,211 +1,211 b''
 # Copyright 2006, 2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 '''share a common history between several working directories
 
 Automatic Pooled Storage for Clones
 -----------------------------------
 
 When this extension is active, :hg:`clone` can be configured to
 automatically share/pool storage across multiple clones. This
 mode effectively converts :hg:`clone` to :hg:`clone` + :hg:`share`.
 The benefit of using this mode is the automatic management of
 store paths and intelligent pooling of related repositories.
 
 The following ``share.`` config options influence this feature:
 
 ``share.pool``
     Filesystem path where shared repository data will be stored. When
     defined, :hg:`clone` will automatically use shared repository
     storage instead of creating a store inside each clone.
 
 ``share.poolnaming``
     How directory names in ``share.pool`` are constructed.
 
     "identity" means the name is derived from the first changeset in the
     repository. In this mode, different remotes share storage if their
     root/initial changeset is identical. In this mode, the local shared
     repository is an aggregate of all encountered remote repositories.
 
     "remote" means the name is derived from the source repository's
     path or URL. In this mode, storage is only shared if the path or URL
     requested in the :hg:`clone` command matches exactly to a repository
     that was cloned before.
 
-    The default naming mode is "identity."
+    The default naming mode is "identity".
 '''
 
 from __future__ import absolute_import
 
 import errno
 from mercurial.i18n import _
 from mercurial import (
     bookmarks,
     commands,
     error,
     extensions,
     hg,
     registrar,
     txnutil,
     util,
 )
 
 repository = hg.repository
 parseurl = hg.parseurl
 
 cmdtable = {}
 command = registrar.command(cmdtable)
 # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
 # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
 # be specifying the version(s) of Mercurial they are tested with, or
 # leave the attribute unspecified.
 testedwith = 'ships-with-hg-core'
 
 configtable = {}
 configitem = registrar.configitem(configtable)
 
 configitem('share', 'pool',
     default=None,
 )
 configitem('share', 'poolnaming',
     default='identity',
 )
 
 @command('share',
     [('U', 'noupdate', None, _('do not create a working directory')),
      ('B', 'bookmarks', None, _('also share bookmarks')),
      ('', 'relative', None, _('point to source using a relative path '
                               '(EXPERIMENTAL)')),
     ],
     _('[-U] [-B] SOURCE [DEST]'),
     norepo=True)
 def share(ui, source, dest=None, noupdate=False, bookmarks=False,
           relative=False):
     """create a new shared repository
 
     Initialize a new repository and working directory that shares its
     history (and optionally bookmarks) with another repository.
 
     .. note::
 
        using rollback or extensions that destroy/modify history (mq,
        rebase, etc.) can cause considerable confusion with shared
        clones. In particular, if two shared clones are both updated to
        the same changeset, and one of them destroys that changeset
        with rollback, the other clone will suddenly stop working: all
        operations will fail with "abort: working directory has unknown
        parent". The only known workaround is to use debugsetparents on
        the broken clone to reset it to a changeset that still exists.
     """
 
     hg.share(ui, source, dest=dest, update=not noupdate,
              bookmarks=bookmarks, relative=relative)
     return 0
 
 @command('unshare', [], '')
 def unshare(ui, repo):
     """convert a shared repository to a normal one
 
     Copy the store data to the repo and remove the sharedpath data.
     """
 
     if not repo.shared():
         raise error.Abort(_("this is not a shared repo"))
 
     hg.unshare(ui, repo)
 
 # Wrap clone command to pass auto share options.
 def clone(orig, ui, source, *args, **opts):
     pool = ui.config('share', 'pool')
     if pool:
         pool = util.expandpath(pool)
 
     opts[r'shareopts'] = {
         'pool': pool,
         'mode': ui.config('share', 'poolnaming'),
     }
 
     return orig(ui, source, *args, **opts)
 
 def extsetup(ui):
     extensions.wrapfunction(bookmarks, '_getbkfile', getbkfile)
     extensions.wrapfunction(bookmarks.bmstore, '_recordchange', recordchange)
     extensions.wrapfunction(bookmarks.bmstore, '_writerepo', writerepo)
     extensions.wrapcommand(commands.table, 'clone', clone)
 
 def _hassharedbookmarks(repo):
     """Returns whether this repo has shared bookmarks"""
     try:
         shared = repo.vfs.read('shared').splitlines()
     except IOError as inst:
         if inst.errno != errno.ENOENT:
             raise
         return False
     return hg.sharedbookmarks in shared
 
 def _getsrcrepo(repo):
     """
     Returns the source repository object for a given shared repository.
     If repo is not a shared repository, return None.
     """
     if repo.sharedpath == repo.path:
         return None
 
     if util.safehasattr(repo, 'srcrepo') and repo.srcrepo:
         return repo.srcrepo
 
     # the sharedpath always ends in the .hg; we want the path to the repo
     source = repo.vfs.split(repo.sharedpath)[0]
     srcurl, branches = parseurl(source)
     srcrepo = repository(repo.ui, srcurl)
     repo.srcrepo = srcrepo
     return srcrepo
 
 def getbkfile(orig, repo):
     if _hassharedbookmarks(repo):
         srcrepo = _getsrcrepo(repo)
         if srcrepo is not None:
             # just orig(srcrepo) doesn't work as expected, because
             # HG_PENDING refers repo.root.
             try:
                 fp, pending = txnutil.trypending(repo.root, repo.vfs,
                                                  'bookmarks')
                 if pending:
                     # only in this case, bookmark information in repo
                     # is up-to-date.
                     return fp
                 fp.close()
             except IOError as inst:
                 if inst.errno != errno.ENOENT:
                     raise
 
             # otherwise, we should read bookmarks from srcrepo,
             # because .hg/bookmarks in srcrepo might be already
             # changed via another sharing repo
             repo = srcrepo
 
             # TODO: Pending changes in repo are still invisible in
             # srcrepo, because bookmarks.pending is written only into repo.
             # See also https://www.mercurial-scm.org/wiki/SharedRepository
     return orig(repo)
 
 def recordchange(orig, self, tr):
     # Continue with write to local bookmarks file as usual
     orig(self, tr)
 
     if _hassharedbookmarks(self._repo):
         srcrepo = _getsrcrepo(self._repo)
         if srcrepo is not None:
             category = 'share-bookmarks'
             tr.addpostclose(category, lambda tr: self._writerepo(srcrepo))
 
 def writerepo(orig, self, repo):
     # First write local bookmarks file in case we ever unshare
     orig(self, repo)
 
     if _hassharedbookmarks(self._repo):
         srcrepo = _getsrcrepo(self._repo)
         if srcrepo is not None:
             orig(self, srcrepo)

mercurial/commands.py

@@ -1,5587 +1,5587 b''
 # commands.py - command processing for mercurial
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import difflib
 import errno
 import os
 import re
 import sys
 
 from .i18n import _
 from .node import (
     hex,
     nullid,
     nullrev,
     short,
 )
 from . import (
     archival,
     bookmarks,
     bundle2,
     changegroup,
     cmdutil,
     copies,
     debugcommands as debugcommandsmod,
     destutil,
     dirstateguard,
     discovery,
     encoding,
     error,
     exchange,
     extensions,
     formatter,
     graphmod,
     hbisect,
     help,
     hg,
     lock as lockmod,
     merge as mergemod,
     obsolete,
     patch,
     phases,
     pycompat,
     rcutil,
     registrar,
     revsetlang,
     scmutil,
     server,
     sshserver,
     streamclone,
     tags as tagsmod,
     templatekw,
     ui as uimod,
     util,
 )
 
 release = lockmod.release
 
 table = {}
 table.update(debugcommandsmod.command._table)
 
 command = registrar.command(table)
 
 # common command options
 
 globalopts = [
     ('R', 'repository', '',
      _('repository root directory or name of overlay bundle file'),
      _('REPO')),
     ('', 'cwd', '',
      _('change working directory'), _('DIR')),
     ('y', 'noninteractive', None,
      _('do not prompt, automatically pick the first choice for all prompts')),
     ('q', 'quiet', None, _('suppress output')),
     ('v', 'verbose', None, _('enable additional output')),
     ('', 'color', '',
      # i18n: 'always', 'auto', 'never', and 'debug' are keywords
      # and should not be translated
      _("when to colorize (boolean, always, auto, never, or debug)"),
      _('TYPE')),
     ('', 'config', [],
      _('set/override config option (use \'section.name=value\')'),
      _('CONFIG')),
     ('', 'debug', None, _('enable debugging output')),
     ('', 'debugger', None, _('start debugger')),
     ('', 'encoding', encoding.encoding, _('set the charset encoding'),
      _('ENCODE')),
     ('', 'encodingmode', encoding.encodingmode,
      _('set the charset encoding mode'), _('MODE')),
     ('', 'traceback', None, _('always print a traceback on exception')),
     ('', 'time', None, _('time how long the command takes')),
     ('', 'profile', None, _('print command execution profile')),
     ('', 'version', None, _('output version information and exit')),
     ('h', 'help', None, _('display help and exit')),
     ('', 'hidden', False, _('consider hidden changesets')),
     ('', 'pager', 'auto',
      _("when to paginate (boolean, always, auto, or never)"), _('TYPE')),
 ]
 
 dryrunopts = cmdutil.dryrunopts
 remoteopts = cmdutil.remoteopts
 walkopts = cmdutil.walkopts
 commitopts = cmdutil.commitopts
 commitopts2 = cmdutil.commitopts2
 formatteropts = cmdutil.formatteropts
 templateopts = cmdutil.templateopts
 logopts = cmdutil.logopts
 diffopts = cmdutil.diffopts
 diffwsopts = cmdutil.diffwsopts
 diffopts2 = cmdutil.diffopts2
 mergetoolopts = cmdutil.mergetoolopts
 similarityopts = cmdutil.similarityopts
 subrepoopts = cmdutil.subrepoopts
 debugrevlogopts = cmdutil.debugrevlogopts
 
 # Commands start here, listed alphabetically
 
 @command('^add',
     walkopts + subrepoopts + dryrunopts,
     _('[OPTION]... [FILE]...'),
     inferrepo=True)
 def add(ui, repo, *pats, **opts):
     """add the specified files on the next commit
 
     Schedule files to be version controlled and added to the
     repository.
 
     The files will be added to the repository at the next commit. To
     undo an add before that, see :hg:`forget`.
 
     If no names are given, add all files to the repository (except
     files matching ``.hgignore``).
 
     .. container:: verbose
 
        Examples:
 
          - New (unknown) files are added
            automatically by :hg:`add`::
 
              $ ls
              foo.c
              $ hg status
              ? foo.c
              $ hg add
              adding foo.c
              $ hg status
              A foo.c
 
          - Specific files to be added can be specified::
 
              $ ls
              bar.c  foo.c
              $ hg status
              ? bar.c
              ? foo.c
              $ hg add bar.c
              $ hg status
              A bar.c
              ? foo.c
 
     Returns 0 if all files are successfully added.
     """
 
     m = scmutil.match(repo[None], pats, pycompat.byteskwargs(opts))
     rejected = cmdutil.add(ui, repo, m, "", False, **opts)
     return rejected and 1 or 0
 
 @command('addremove',
     similarityopts + subrepoopts + walkopts + dryrunopts,
     _('[OPTION]... [FILE]...'),
     inferrepo=True)
 def addremove(ui, repo, *pats, **opts):
     """add all new files, delete all missing files
 
     Add all new files and remove all missing files from the
     repository.
 
     Unless names are given, new files are ignored if they match any of
     the patterns in ``.hgignore``. As with add, these changes take
     effect at the next commit.
 
     Use the -s/--similarity option to detect renamed files. This
     option takes a percentage between 0 (disabled) and 100 (files must
     be identical) as its parameter. With a parameter greater than 0,
     this compares every removed file with every added file and records
     those similar enough as renames. Detecting renamed files this way
     can be expensive. After using this option, :hg:`status -C` can be
     used to check which files were identified as moved or renamed. If
     not specified, -s/--similarity defaults to 100 and only renames of
     identical files are detected.
 
     .. container:: verbose
 
        Examples:
 
          - A number of files (bar.c and foo.c) are new,
            while foobar.c has been removed (without using :hg:`remove`)
            from the repository::
 
              $ ls
              bar.c foo.c
              $ hg status
              ! foobar.c
              ? bar.c
              ? foo.c
              $ hg addremove
              adding bar.c
              adding foo.c
              removing foobar.c
              $ hg status
              A bar.c
              A foo.c
              R foobar.c
 
          - A file foobar.c was moved to foo.c without using :hg:`rename`.
            Afterwards, it was edited slightly::
 
              $ ls
              foo.c
              $ hg status
              ! foobar.c
              ? foo.c
              $ hg addremove --similarity 90
              removing foobar.c
              adding foo.c
              recording removal of foobar.c as rename to foo.c (94% similar)
              $ hg status -C
              A foo.c
                foobar.c
              R foobar.c
 
     Returns 0 if all files are successfully added.
     """
     opts = pycompat.byteskwargs(opts)
     try:
         sim = float(opts.get('similarity') or 100)
     except ValueError:
         raise error.Abort(_('similarity must be a number'))
     if sim < 0 or sim > 100:
         raise error.Abort(_('similarity must be between 0 and 100'))
     matcher = scmutil.match(repo[None], pats, opts)
     return scmutil.addremove(repo, matcher, "", opts, similarity=sim / 100.0)
 
 @command('^annotate|blame',
     [('r', 'rev', '', _('annotate the specified revision'), _('REV')),
     ('', 'follow', None,
      _('follow copies/renames and list the filename (DEPRECATED)')),
     ('', 'no-follow', None, _("don't follow copies and renames")),
     ('a', 'text', None, _('treat all files as text')),
     ('u', 'user', None, _('list the author (long with -v)')),
     ('f', 'file', None, _('list the filename')),
     ('d', 'date', None, _('list the date (short with -q)')),
     ('n', 'number', None, _('list the revision number (default)')),
     ('c', 'changeset', None, _('list the changeset')),
     ('l', 'line-number', None, _('show line number at the first appearance')),
     ('', 'skip', [], _('revision to not display (EXPERIMENTAL)'), _('REV')),
     ] + diffwsopts + walkopts + formatteropts,
     _('[-r REV] [-f] [-a] [-u] [-d] [-n] [-c] [-l] FILE...'),
     inferrepo=True)
 def annotate(ui, repo, *pats, **opts):
     """show changeset information by line for each file
 
     List changes in files, showing the revision id responsible for
     each line.
 
     This command is useful for discovering when a change was made and
     by whom.
 
     If you include --file, --user, or --date, the revision number is
     suppressed unless you also include --number.
 
     Without the -a/--text option, annotate will avoid processing files
     it detects as binary. With -a, annotate will annotate the file
     anyway, although the results will probably be neither useful
     nor desirable.
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     if not pats:
         raise error.Abort(_('at least one filename or pattern is required'))
 
     if opts.get('follow'):
         # --follow is deprecated and now just an alias for -f/--file
         # to mimic the behavior of Mercurial before version 1.5
         opts['file'] = True
 
     ctx = scmutil.revsingle(repo, opts.get('rev'))
 
     rootfm = ui.formatter('annotate', opts)
     if ui.quiet:
         datefunc = util.shortdate
     else:
         datefunc = util.datestr
     if ctx.rev() is None:
         def hexfn(node):
             if node is None:
                 return None
             else:
                 return rootfm.hexfunc(node)
         if opts.get('changeset'):
             # omit "+" suffix which is appended to node hex
             def formatrev(rev):
                 if rev is None:
                     return '%d' % ctx.p1().rev()
                 else:
                     return '%d' % rev
         else:
             def formatrev(rev):
                 if rev is None:
                     return '%d+' % ctx.p1().rev()
                 else:
                     return '%d ' % rev
         def formathex(hex):
             if hex is None:
                 return '%s+' % rootfm.hexfunc(ctx.p1().node())
             else:
                 return '%s ' % hex
     else:
         hexfn = rootfm.hexfunc
         formatrev = formathex = pycompat.bytestr
 
     opmap = [('user', ' ', lambda x: x.fctx.user(), ui.shortuser),
              ('number', ' ', lambda x: x.fctx.rev(), formatrev),
              ('changeset', ' ', lambda x: hexfn(x.fctx.node()), formathex),
              ('date', ' ', lambda x: x.fctx.date(), util.cachefunc(datefunc)),
              ('file', ' ', lambda x: x.fctx.path(), str),
              ('line_number', ':', lambda x: x.lineno, str),
             ]
     fieldnamemap = {'number': 'rev', 'changeset': 'node'}
 
     if (not opts.get('user') and not opts.get('changeset')
         and not opts.get('date') and not opts.get('file')):
         opts['number'] = True
 
     linenumber = opts.get('line_number') is not None
     if linenumber and (not opts.get('changeset')) and (not opts.get('number')):
         raise error.Abort(_('at least one of -n/-c is required for -l'))
 
     ui.pager('annotate')
 
     if rootfm.isplain():
         def makefunc(get, fmt):
             return lambda x: fmt(get(x))
     else:
         def makefunc(get, fmt):
             return get
     funcmap = [(makefunc(get, fmt), sep) for op, sep, get, fmt in opmap
                if opts.get(op)]
     funcmap[0] = (funcmap[0][0], '') # no separator in front of first column
     fields = ' '.join(fieldnamemap.get(op, op) for op, sep, get, fmt in opmap
                       if opts.get(op))
 
     def bad(x, y):
         raise error.Abort("%s: %s" % (x, y))
 
     m = scmutil.match(ctx, pats, opts, badfn=bad)
 
     follow = not opts.get('no_follow')
     diffopts = patch.difffeatureopts(ui, opts, section='annotate',
                                      whitespace=True)
     skiprevs = opts.get('skip')
     if skiprevs:
         skiprevs = scmutil.revrange(repo, skiprevs)
 
     for abs in ctx.walk(m):
         fctx = ctx[abs]
         rootfm.startitem()
         rootfm.data(abspath=abs, path=m.rel(abs))
         if not opts.get('text') and fctx.isbinary():
             rootfm.plain(_("%s: binary file\n")
                          % ((pats and m.rel(abs)) or abs))
             continue
 
         fm = rootfm.nested('lines')
         lines = fctx.annotate(follow=follow, linenumber=linenumber,
                               skiprevs=skiprevs, diffopts=diffopts)
         if not lines:
             fm.end()
             continue
         formats = []
         pieces = []
 
         for f, sep in funcmap:
             l = [f(n) for n, dummy in lines]
             if fm.isplain():
                 sizes = [encoding.colwidth(x) for x in l]
                 ml = max(sizes)
                 formats.append([sep + ' ' * (ml - w) + '%s' for w in sizes])
             else:
                 formats.append(['%s' for x in l])
             pieces.append(l)
 
         for f, p, l in zip(zip(*formats), zip(*pieces), lines):
             fm.startitem()
             fm.write(fields, "".join(f), *p)
             if l[0].skip:
                 fmt = "* %s"
             else:
                 fmt = ": %s"
             fm.write('line', fmt, l[1])
 
         if not lines[-1][1].endswith('\n'):
             fm.plain('\n')
         fm.end()
 
     rootfm.end()
 
 @command('archive',
     [('', 'no-decode', None, _('do not pass files through decoders')),
     ('p', 'prefix', '', _('directory prefix for files in archive'),
      _('PREFIX')),
     ('r', 'rev', '', _('revision to distribute'), _('REV')),
     ('t', 'type', '', _('type of distribution to create'), _('TYPE')),
     ] + subrepoopts + walkopts,
     _('[OPTION]... DEST'))
 def archive(ui, repo, dest, **opts):
     '''create an unversioned archive of a repository revision
 
     By default, the revision used is the parent of the working
     directory; use -r/--rev to specify a different revision.
 
     The archive type is automatically detected based on file
     extension (to override, use -t/--type).
 
     .. container:: verbose
 
       Examples:
 
       - create a zip file containing the 1.0 release::
 
           hg archive -r 1.0 project-1.0.zip
 
       - create a tarball excluding .hg files::
 
           hg archive project.tar.gz -X ".hg*"
 
     Valid types are:
 
     :``files``: a directory full of files (default)
     :``tar``:   tar archive, uncompressed
     :``tbz2``:  tar archive, compressed using bzip2
     :``tgz``:   tar archive, compressed using gzip
     :``uzip``:  zip archive, uncompressed
     :``zip``:   zip archive, compressed using deflate
 
     The exact name of the destination archive or directory is given
     using a format string; see :hg:`help export` for details.
 
     Each member added to an archive file has a directory prefix
     prepended. Use -p/--prefix to specify a format string for the
     prefix. The default is the basename of the archive, with suffixes
     removed.
 
     Returns 0 on success.
     '''
 
     opts = pycompat.byteskwargs(opts)
     ctx = scmutil.revsingle(repo, opts.get('rev'))
     if not ctx:
         raise error.Abort(_('no working directory: please specify a revision'))
     node = ctx.node()
     dest = cmdutil.makefilename(repo, dest, node)
     if os.path.realpath(dest) == repo.root:
         raise error.Abort(_('repository root cannot be destination'))
 
     kind = opts.get('type') or archival.guesskind(dest) or 'files'
     prefix = opts.get('prefix')
 
     if dest == '-':
         if kind == 'files':
             raise error.Abort(_('cannot archive plain files to stdout'))
         dest = cmdutil.makefileobj(repo, dest)
         if not prefix:
             prefix = os.path.basename(repo.root) + '-%h'
 
     prefix = cmdutil.makefilename(repo, prefix, node)
     match = scmutil.match(ctx, [], opts)
     archival.archive(repo, dest, node, kind, not opts.get('no_decode'),
                      match, prefix, subrepos=opts.get('subrepos'))
 
 @command('backout',
     [('', 'merge', None, _('merge with old dirstate parent after backout')),
     ('', 'commit', None,
      _('commit if no conflicts were encountered (DEPRECATED)')),
     ('', 'no-commit', None, _('do not commit')),
     ('', 'parent', '',
      _('parent to choose when backing out merge (DEPRECATED)'), _('REV')),
     ('r', 'rev', '', _('revision to backout'), _('REV')),
     ('e', 'edit', False, _('invoke editor on commit messages')),
     ] + mergetoolopts + walkopts + commitopts + commitopts2,
     _('[OPTION]... [-r] REV'))
 def backout(ui, repo, node=None, rev=None, **opts):
     '''reverse effect of earlier changeset
 
     Prepare a new changeset with the effect of REV undone in the
     current working directory. If no conflicts were encountered,
     it will be committed immediately.
 
     If REV is the parent of the working directory, then this new changeset
     is committed automatically (unless --no-commit is specified).
 
     .. note::
 
        :hg:`backout` cannot be used to fix either an unwanted or
        incorrect merge.
 
     .. container:: verbose
 
       Examples:
 
       - Reverse the effect of the parent of the working directory.
         This backout will be committed immediately::
 
           hg backout -r .
 
       - Reverse the effect of previous bad revision 23::
 
           hg backout -r 23
 
       - Reverse the effect of previous bad revision 23 and
         leave changes uncommitted::
 
           hg backout -r 23 --no-commit
           hg commit -m "Backout revision 23"
 
       By default, the pending changeset will have one parent,
       maintaining a linear history. With --merge, the pending
       changeset will instead have two parents: the old parent of the
       working directory and a new child of REV that simply undoes REV.
 
       Before version 1.7, the behavior without --merge was equivalent
       to specifying --merge followed by :hg:`update --clean .` to
       cancel the merge and leave the child of REV as a head to be
       merged separately.
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     See :hg:`help revert` for a way to restore files to the state
     of another revision.
 
     Returns 0 on success, 1 if nothing to backout or there are unresolved
     files.
     '''
     wlock = lock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         return _dobackout(ui, repo, node, rev, **opts)
     finally:
         release(lock, wlock)
 
 def _dobackout(ui, repo, node=None, rev=None, **opts):
     opts = pycompat.byteskwargs(opts)
     if opts.get('commit') and opts.get('no_commit'):
         raise error.Abort(_("cannot use --commit with --no-commit"))
     if opts.get('merge') and opts.get('no_commit'):
         raise error.Abort(_("cannot use --merge with --no-commit"))
 
     if rev and node:
         raise error.Abort(_("please specify just one revision"))
 
     if not rev:
         rev = node
 
     if not rev:
         raise error.Abort(_("please specify a revision to backout"))
 
     date = opts.get('date')
     if date:
         opts['date'] = util.parsedate(date)
 
     cmdutil.checkunfinished(repo)
     cmdutil.bailifchanged(repo)
     node = scmutil.revsingle(repo, rev).node()
 
     op1, op2 = repo.dirstate.parents()
     if not repo.changelog.isancestor(node, op1):
         raise error.Abort(_('cannot backout change that is not an ancestor'))
 
     p1, p2 = repo.changelog.parents(node)
     if p1 == nullid:
         raise error.Abort(_('cannot backout a change with no parents'))
     if p2 != nullid:
         if not opts.get('parent'):
             raise error.Abort(_('cannot backout a merge changeset'))
         p = repo.lookup(opts['parent'])
         if p not in (p1, p2):
             raise error.Abort(_('%s is not a parent of %s') %
                              (short(p), short(node)))
         parent = p
     else:
         if opts.get('parent'):
             raise error.Abort(_('cannot use --parent on non-merge changeset'))
         parent = p1
 
     # the backout should appear on the same branch
     branch = repo.dirstate.branch()
     bheads = repo.branchheads(branch)
     rctx = scmutil.revsingle(repo, hex(parent))
     if not opts.get('merge') and op1 != node:
         dsguard = dirstateguard.dirstateguard(repo, 'backout')
         try:
             ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                          'backout')
             stats = mergemod.update(repo, parent, True, True, node, False)
             repo.setparents(op1, op2)
             dsguard.close()
             hg._showstats(repo, stats)
             if stats[3]:
                 repo.ui.status(_("use 'hg resolve' to retry unresolved "
                                  "file merges\n"))
                 return 1
         finally:
             ui.setconfig('ui', 'forcemerge', '', '')
             lockmod.release(dsguard)
     else:
         hg.clean(repo, node, show_stats=False)
         repo.dirstate.setbranch(branch)
         cmdutil.revert(ui, repo, rctx, repo.dirstate.parents())
 
     if opts.get('no_commit'):
         msg = _("changeset %s backed out, "
                 "don't forget to commit.\n")
         ui.status(msg % short(node))
         return 0
 
     def commitfunc(ui, repo, message, match, opts):
         editform = 'backout'
         e = cmdutil.getcommiteditor(editform=editform,
                                     **pycompat.strkwargs(opts))
         if not message:
             # we don't translate commit messages
             message = "Backed out changeset %s" % short(node)
             e = cmdutil.getcommiteditor(edit=True, editform=editform)
         return repo.commit(message, opts.get('user'), opts.get('date'),
                            match, editor=e)
     newnode = cmdutil.commit(ui, repo, commitfunc, [], opts)
     if not newnode:
         ui.status(_("nothing changed\n"))
         return 1
     cmdutil.commitstatus(repo, newnode, branch, bheads)
 
     def nice(node):
         return '%d:%s' % (repo.changelog.rev(node), short(node))
     ui.status(_('changeset %s backs out changeset %s\n') %
               (nice(repo.changelog.tip()), nice(node)))
     if opts.get('merge') and op1 != node:
         hg.clean(repo, op1, show_stats=False)
         ui.status(_('merging with changeset %s\n')
                   % nice(repo.changelog.tip()))
         try:
             ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                          'backout')
             return hg.merge(repo, hex(repo.changelog.tip()))
         finally:
             ui.setconfig('ui', 'forcemerge', '', '')
     return 0
 
 @command('bisect',
     [('r', 'reset', False, _('reset bisect state')),
     ('g', 'good', False, _('mark changeset good')),
     ('b', 'bad', False, _('mark changeset bad')),
     ('s', 'skip', False, _('skip testing changeset')),
     ('e', 'extend', False, _('extend the bisect range')),
     ('c', 'command', '', _('use command to check changeset state'), _('CMD')),
     ('U', 'noupdate', False, _('do not update to target'))],
     _("[-gbsr] [-U] [-c CMD] [REV]"))
 def bisect(ui, repo, rev=None, extra=None, command=None,
                reset=None, good=None, bad=None, skip=None, extend=None,
                noupdate=None):
     """subdivision search of changesets
 
     This command helps to find changesets which introduce problems. To
     use, mark the earliest changeset you know exhibits the problem as
     bad, then mark the latest changeset which is free from the problem
     as good. Bisect will update your working directory to a revision
     for testing (unless the -U/--noupdate option is specified). Once
     you have performed tests, mark the working directory as good or
     bad, and bisect will either update to another candidate changeset
     or announce that it has found the bad revision.
 
     As a shortcut, you can also use the revision argument to mark a
     revision as good or bad without checking it out first.
 
     If you supply a command, it will be used for automatic bisection.
     The environment variable HG_NODE will contain the ID of the
     changeset being tested. The exit status of the command will be
     used to mark revisions as good or bad: status 0 means good, 125
     means to skip the revision, 127 (command not found) will abort the
     bisection, and any other non-zero exit status means the revision
     is bad.
 
     .. container:: verbose
 
       Some examples:
 
       - start a bisection with known bad revision 34, and good revision 12::
 
           hg bisect --bad 34
           hg bisect --good 12
 
       - advance the current bisection by marking current revision as good or
         bad::
 
           hg bisect --good
           hg bisect --bad
 
       - mark the current revision, or a known revision, to be skipped (e.g. if
         that revision is not usable because of another issue)::
 
           hg bisect --skip
           hg bisect --skip 23
 
       - skip all revisions that do not touch directories ``foo`` or ``bar``::
 
           hg bisect --skip "!( file('path:foo') & file('path:bar') )"
 
       - forget the current bisection::
 
           hg bisect --reset
 
       - use 'make && make tests' to automatically find the first broken
         revision::
 
           hg bisect --reset
           hg bisect --bad 34
           hg bisect --good 12
           hg bisect --command "make && make tests"
 
       - see all changesets whose states are already known in the current
         bisection::
 
           hg log -r "bisect(pruned)"
 
       - see the changeset currently being bisected (especially useful
         if running with -U/--noupdate)::
 
           hg log -r "bisect(current)"
 
       - see all changesets that took part in the current bisection::
 
           hg log -r "bisect(range)"
 
       - you can even get a nice graph::
 
           hg log --graph -r "bisect(range)"
 
       See :hg:`help revisions.bisect` for more about the `bisect()` predicate.
 
     Returns 0 on success.
     """
     # backward compatibility
     if rev in "good bad reset init".split():
         ui.warn(_("(use of 'hg bisect <cmd>' is deprecated)\n"))
         cmd, rev, extra = rev, extra, None
         if cmd == "good":
             good = True
         elif cmd == "bad":
             bad = True
         else:
             reset = True
     elif extra:
         raise error.Abort(_('incompatible arguments'))
 
     incompatibles = {
         '--bad': bad,
         '--command': bool(command),
         '--extend': extend,
         '--good': good,
         '--reset': reset,
         '--skip': skip,
     }
 
     enabled = [x for x in incompatibles if incompatibles[x]]
 
     if len(enabled) > 1:
         raise error.Abort(_('%s and %s are incompatible') %
                           tuple(sorted(enabled)[0:2]))
 
     if reset:
         hbisect.resetstate(repo)
         return
 
     state = hbisect.load_state(repo)
 
     # update state
     if good or bad or skip:
         if rev:
             nodes = [repo.lookup(i) for i in scmutil.revrange(repo, [rev])]
         else:
             nodes = [repo.lookup('.')]
         if good:
             state['good'] += nodes
         elif bad:
             state['bad'] += nodes
         elif skip:
             state['skip'] += nodes
         hbisect.save_state(repo, state)
         if not (state['good'] and state['bad']):
             return
 
     def mayupdate(repo, node, show_stats=True):
         """common used update sequence"""
         if noupdate:
             return
         cmdutil.checkunfinished(repo)
         cmdutil.bailifchanged(repo)
         return hg.clean(repo, node, show_stats=show_stats)
 
     displayer = cmdutil.show_changeset(ui, repo, {})
 
     if command:
         changesets = 1
         if noupdate:
             try:
                 node = state['current'][0]
             except LookupError:
                 raise error.Abort(_('current bisect revision is unknown - '
                                    'start a new bisect to fix'))
         else:
             node, p2 = repo.dirstate.parents()
             if p2 != nullid:
                 raise error.Abort(_('current bisect revision is a merge'))
         if rev:
             node = repo[scmutil.revsingle(repo, rev, node)].node()
         try:
             while changesets:
                 # update state
                 state['current'] = [node]
                 hbisect.save_state(repo, state)
                 status = ui.system(command, environ={'HG_NODE': hex(node)},
                                    blockedtag='bisect_check')
                 if status == 125:
                     transition = "skip"
                 elif status == 0:
                     transition = "good"
                 # status < 0 means process was killed
                 elif status == 127:
                     raise error.Abort(_("failed to execute %s") % command)
                 elif status < 0:
                     raise error.Abort(_("%s killed") % command)
                 else:
                     transition = "bad"
                 state[transition].append(node)
                 ctx = repo[node]
                 ui.status(_('changeset %d:%s: %s\n') % (ctx, ctx, transition))
                 hbisect.checkstate(state)
                 # bisect
                 nodes, changesets, bgood = hbisect.bisect(repo.changelog, state)
                 # update to next check
                 node = nodes[0]
                 mayupdate(repo, node, show_stats=False)
         finally:
             state['current'] = [node]
             hbisect.save_state(repo, state)
         hbisect.printresult(ui, repo, state, displayer, nodes, bgood)
         return
 
     hbisect.checkstate(state)
 
     # actually bisect
     nodes, changesets, good = hbisect.bisect(repo.changelog, state)
     if extend:
         if not changesets:
             extendnode = hbisect.extendrange(repo, state, nodes, good)
             if extendnode is not None:
                 ui.write(_("Extending search to changeset %d:%s\n")
                          % (extendnode.rev(), extendnode))
                 state['current'] = [extendnode.node()]
                 hbisect.save_state(repo, state)
                 return mayupdate(repo, extendnode.node())
         raise error.Abort(_("nothing to extend"))
 
     if changesets == 0:
         hbisect.printresult(ui, repo, state, displayer, nodes, good)
     else:
         assert len(nodes) == 1 # only a single node can be tested next
         node = nodes[0]
         # compute the approximate number of remaining tests
         tests, size = 0, 2
         while size <= changesets:
             tests, size = tests + 1, size * 2
         rev = repo.changelog.rev(node)
         ui.write(_("Testing changeset %d:%s "
                    "(%d changesets remaining, ~%d tests)\n")
                  % (rev, short(node), changesets, tests))
         state['current'] = [node]
         hbisect.save_state(repo, state)
         return mayupdate(repo, node)
 
 @command('bookmarks|bookmark',
     [('f', 'force', False, _('force')),
     ('r', 'rev', '', _('revision for bookmark action'), _('REV')),
     ('d', 'delete', False, _('delete a given bookmark')),
     ('m', 'rename', '', _('rename a given bookmark'), _('OLD')),
     ('i', 'inactive', False, _('mark a bookmark inactive')),
     ] + formatteropts,
     _('hg bookmarks [OPTIONS]... [NAME]...'))
 def bookmark(ui, repo, *names, **opts):
     '''create a new bookmark or list existing bookmarks
 
     Bookmarks are labels on changesets to help track lines of development.
     Bookmarks are unversioned and can be moved, renamed and deleted.
     Deleting or moving a bookmark has no effect on the associated changesets.
 
     Creating or updating to a bookmark causes it to be marked as 'active'.
     The active bookmark is indicated with a '*'.
     When a commit is made, the active bookmark will advance to the new commit.
     A plain :hg:`update` will also advance an active bookmark, if possible.
     Updating away from a bookmark will cause it to be deactivated.
 
     Bookmarks can be pushed and pulled between repositories (see
     :hg:`help push` and :hg:`help pull`). If a shared bookmark has
     diverged, a new 'divergent bookmark' of the form 'name@path' will
     be created. Using :hg:`merge` will resolve the divergence.
 
     Specifying bookmark as '.' to -m or -d options is equivalent to specifying
     the active bookmark's name.
 
     A bookmark named '@' has the special property that :hg:`clone` will
     check it out by default if it exists.
 
     .. container:: verbose
 
       Examples:
 
       - create an active bookmark for a new line of development::
 
           hg book new-feature
 
       - create an inactive bookmark as a place marker::
 
           hg book -i reviewed
 
       - create an inactive bookmark on another changeset::
 
           hg book -r .^ tested
 
       - rename bookmark turkey to dinner::
 
           hg book -m turkey dinner
 
       - move the '@' bookmark from another branch::
 
           hg book -f @
     '''
     force = opts.get(r'force')
     rev = opts.get(r'rev')
     delete = opts.get(r'delete')
     rename = opts.get(r'rename')
     inactive = opts.get(r'inactive')
 
     if delete and rename:
         raise error.Abort(_("--delete and --rename are incompatible"))
     if delete and rev:
         raise error.Abort(_("--rev is incompatible with --delete"))
     if rename and rev:
         raise error.Abort(_("--rev is incompatible with --rename"))
     if not names and (delete or rev):
         raise error.Abort(_("bookmark name required"))
 
     if delete or rename or names or inactive:
         with repo.wlock(), repo.lock(), repo.transaction('bookmark') as tr:
             if delete:
                 names = pycompat.maplist(repo._bookmarks.expandname, names)
                 bookmarks.delete(repo, tr, names)
             elif rename:
                 if not names:
                     raise error.Abort(_("new bookmark name required"))
                 elif len(names) > 1:
                     raise error.Abort(_("only one new bookmark name allowed"))
                 rename = repo._bookmarks.expandname(rename)
                 bookmarks.rename(repo, tr, rename, names[0], force, inactive)
             elif names:
                 bookmarks.addbookmarks(repo, tr, names, rev, force, inactive)
             elif inactive:
                 if len(repo._bookmarks) == 0:
                     ui.status(_("no bookmarks set\n"))
                 elif not repo._activebookmark:
                     ui.status(_("no active bookmark\n"))
                 else:
                     bookmarks.deactivate(repo)
     else: # show bookmarks
         bookmarks.printbookmarks(ui, repo, **opts)
 
 @command('branch',
     [('f', 'force', None,
      _('set branch name even if it shadows an existing branch')),
     ('C', 'clean', None, _('reset branch name to parent branch name'))],
     _('[-fC] [NAME]'))
 def branch(ui, repo, label=None, **opts):
     """set or show the current branch name
 
     .. note::
 
        Branch names are permanent and global. Use :hg:`bookmark` to create a
        light-weight bookmark instead. See :hg:`help glossary` for more
        information about named branches and bookmarks.
 
     With no argument, show the current branch name. With one argument,
     set the working directory branch name (the branch will not exist
     in the repository until the next commit). Standard practice
     recommends that primary development take place on the 'default'
     branch.
 
     Unless -f/--force is specified, branch will not let you set a
     branch name that already exists.
 
     Use -C/--clean to reset the working directory branch to that of
     the parent of the working directory, negating a previous branch
     change.
 
     Use the command :hg:`update` to switch to an existing branch. Use
     :hg:`commit --close-branch` to mark this branch head as closed.
     When all heads of a branch are closed, the branch will be
     considered closed.
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     if label:
         label = label.strip()
 
     if not opts.get('clean') and not label:
         ui.write("%s\n" % repo.dirstate.branch())
         return
 
     with repo.wlock():
         if opts.get('clean'):
             label = repo[None].p1().branch()
             repo.dirstate.setbranch(label)
             ui.status(_('reset working directory to branch %s\n') % label)
         elif label:
             if not opts.get('force') and label in repo.branchmap():
                 if label not in [p.branch() for p in repo[None].parents()]:
                     raise error.Abort(_('a branch of the same name already'
                                        ' exists'),
                                      # i18n: "it" refers to an existing branch
                                      hint=_("use 'hg update' to switch to it"))
             scmutil.checknewlabel(repo, label, 'branch')
             repo.dirstate.setbranch(label)
             ui.status(_('marked working directory as branch %s\n') % label)
 
             # find any open named branches aside from default
             others = [n for n, h, t, c in repo.branchmap().iterbranches()
                       if n != "default" and not c]
             if not others:
                 ui.status(_('(branches are permanent and global, '
                             'did you want a bookmark?)\n'))
 
 @command('branches',
     [('a', 'active', False,
       _('show only branches that have unmerged heads (DEPRECATED)')),
      ('c', 'closed', False, _('show normal and closed branches')),
     ] + formatteropts,
     _('[-c]'))
 def branches(ui, repo, active=False, closed=False, **opts):
     """list repository named branches
 
     List the repository's named branches, indicating which ones are
     inactive. If -c/--closed is specified, also list branches which have
     been marked closed (see :hg:`commit --close-branch`).
 
     Use the command :hg:`update` to switch to an existing branch.
 
     Returns 0.
     """
 
     opts = pycompat.byteskwargs(opts)
     ui.pager('branches')
     fm = ui.formatter('branches', opts)
     hexfunc = fm.hexfunc
 
     allheads = set(repo.heads())
     branches = []
     for tag, heads, tip, isclosed in repo.branchmap().iterbranches():
         isactive = False
         if not isclosed:
             openheads = set(repo.branchmap().iteropen(heads))
             isactive = bool(openheads & allheads)
         branches.append((tag, repo[tip], isactive, not isclosed))
     branches.sort(key=lambda i: (i[2], i[1].rev(), i[0], i[3]),
                   reverse=True)
 
     for tag, ctx, isactive, isopen in branches:
         if active and not isactive:
             continue
         if isactive:
             label = 'branches.active'
             notice = ''
         elif not isopen:
             if not closed:
                 continue
             label = 'branches.closed'
             notice = _(' (closed)')
         else:
             label = 'branches.inactive'
             notice = _(' (inactive)')
         current = (tag == repo.dirstate.branch())
         if current:
             label = 'branches.current'
 
         fm.startitem()
         fm.write('branch', '%s', tag, label=label)
         rev = ctx.rev()
         padsize = max(31 - len(str(rev)) - encoding.colwidth(tag), 0)
         fmt = ' ' * padsize + ' %d:%s'
         fm.condwrite(not ui.quiet, 'rev node', fmt, rev, hexfunc(ctx.node()),
                      label='log.changeset changeset.%s' % ctx.phasestr())
         fm.context(ctx=ctx)
         fm.data(active=isactive, closed=not isopen, current=current)
         if not ui.quiet:
             fm.plain(notice)
         fm.plain('\n')
     fm.end()
 
 @command('bundle',
     [('f', 'force', None, _('run even when the destination is unrelated')),
     ('r', 'rev', [], _('a changeset intended to be added to the destination'),
      _('REV')),
     ('b', 'branch', [], _('a specific branch you would like to bundle'),
      _('BRANCH')),
     ('', 'base', [],
      _('a base changeset assumed to be available at the destination'),
      _('REV')),
     ('a', 'all', None, _('bundle all changesets in the repository')),
     ('t', 'type', 'bzip2', _('bundle compression type to use'), _('TYPE')),
     ] + remoteopts,
     _('[-f] [-t BUNDLESPEC] [-a] [-r REV]... [--base REV]... FILE [DEST]'))
 def bundle(ui, repo, fname, dest=None, **opts):
     """create a bundle file
 
     Generate a bundle file containing data to be added to a repository.
 
     To create a bundle containing all changesets, use -a/--all
     (or --base null). Otherwise, hg assumes the destination will have
     all the nodes you specify with --base parameters. Otherwise, hg
     will assume the repository has all the nodes in destination, or
     default-push/default if no destination is specified.
 
     You can change bundle format with the -t/--type option. See
     :hg:`help bundlespec` for documentation on this format. By default,
     the most appropriate format is used and compression defaults to
     bzip2.
 
     The bundle file can then be transferred using conventional means
     and applied to another repository with the unbundle or pull
     command. This is useful when direct push and pull are not
     available or when exporting an entire repository is undesirable.
 
     Applying bundles preserves all changeset contents including
     permissions, copy/rename information, and revision history.
 
     Returns 0 on success, 1 if no changes found.
     """
     opts = pycompat.byteskwargs(opts)
     revs = None
     if 'rev' in opts:
         revstrings = opts['rev']
         revs = scmutil.revrange(repo, revstrings)
         if revstrings and not revs:
             raise error.Abort(_('no commits to bundle'))
 
     bundletype = opts.get('type', 'bzip2').lower()
     try:
         bcompression, cgversion, params = exchange.parsebundlespec(
                 repo, bundletype, strict=False)
     except error.UnsupportedBundleSpecification as e:
         raise error.Abort(str(e),
                           hint=_("see 'hg help bundlespec' for supported "
                                  "values for --type"))
 
     # Packed bundles are a pseudo bundle format for now.
     if cgversion == 's1':
         raise error.Abort(_('packed bundles cannot be produced by "hg bundle"'),
                           hint=_("use 'hg debugcreatestreamclonebundle'"))
 
     if opts.get('all'):
         if dest:
             raise error.Abort(_("--all is incompatible with specifying "
                                 "a destination"))
         if opts.get('base'):
             ui.warn(_("ignoring --base because --all was specified\n"))
         base = ['null']
     else:
         base = scmutil.revrange(repo, opts.get('base'))
     if cgversion not in changegroup.supportedoutgoingversions(repo):
         raise error.Abort(_("repository does not support bundle version %s") %
                           cgversion)
 
     if base:
         if dest:
             raise error.Abort(_("--base is incompatible with specifying "
                                "a destination"))
         common = [repo.lookup(rev) for rev in base]
         heads = revs and map(repo.lookup, revs) or None
         outgoing = discovery.outgoing(repo, common, heads)
     else:
         dest = ui.expandpath(dest or 'default-push', dest or 'default')
         dest, branches = hg.parseurl(dest, opts.get('branch'))
         other = hg.peer(repo, opts, dest)
         revs, checkout = hg.addbranchrevs(repo, repo, branches, revs)
         heads = revs and map(repo.lookup, revs) or revs
         outgoing = discovery.findcommonoutgoing(repo, other,
                                                 onlyheads=heads,
                                                 force=opts.get('force'),
                                                 portable=True)
 
     if not outgoing.missing:
         scmutil.nochangesfound(ui, repo, not base and outgoing.excluded)
         return 1
 
     if cgversion == '01': #bundle1
         if bcompression is None:
             bcompression = 'UN'
         bversion = 'HG10' + bcompression
         bcompression = None
     elif cgversion in ('02', '03'):
         bversion = 'HG20'
     else:
         raise error.ProgrammingError(
             'bundle: unexpected changegroup version %s' % cgversion)
 
     # TODO compression options should be derived from bundlespec parsing.
     # This is a temporary hack to allow adjusting bundle compression
     # level without a) formalizing the bundlespec changes to declare it
     # b) introducing a command flag.
     compopts = {}
     complevel = ui.configint('experimental', 'bundlecomplevel')
     if complevel is not None:
         compopts['level'] = complevel
 
 
     contentopts = {'cg.version': cgversion}
     if repo.ui.configbool('experimental', 'evolution.bundle-obsmarker'):
         contentopts['obsolescence'] = True
     if repo.ui.configbool('experimental', 'bundle-phases'):
         contentopts['phases'] = True
     bundle2.writenewbundle(ui, repo, 'bundle', fname, bversion, outgoing,
                            contentopts, compression=bcompression,
                            compopts=compopts)
 
 @command('cat',
     [('o', 'output', '',
      _('print output to file with formatted name'), _('FORMAT')),
     ('r', 'rev', '', _('print the given revision'), _('REV')),
     ('', 'decode', None, _('apply any matching decode filter')),
     ] + walkopts + formatteropts,
     _('[OPTION]... FILE...'),
     inferrepo=True)
 def cat(ui, repo, file1, *pats, **opts):
     """output the current or given revision of files
 
     Print the specified files as they were at the given revision. If
     no revision is given, the parent of the working directory is used.
 
     Output may be to a file, in which case the name of the file is
     given using a format string. The formatting rules as follows:
 
     :``%%``: literal "%" character
     :``%s``: basename of file being printed
     :``%d``: dirname of file being printed, or '.' if in repository root
     :``%p``: root-relative path name of file being printed
     :``%H``: changeset hash (40 hexadecimal digits)
     :``%R``: changeset revision number
     :``%h``: short-form changeset hash (12 hexadecimal digits)
     :``%r``: zero-padded changeset revision number
     :``%b``: basename of the exporting repository
 
     Returns 0 on success.
     """
     ctx = scmutil.revsingle(repo, opts.get('rev'))
     m = scmutil.match(ctx, (file1,) + pats, opts)
     fntemplate = opts.pop('output', '')
     if cmdutil.isstdiofilename(fntemplate):
         fntemplate = ''
 
     if fntemplate:
         fm = formatter.nullformatter(ui, 'cat')
     else:
         ui.pager('cat')
         fm = ui.formatter('cat', opts)
     with fm:
         return cmdutil.cat(ui, repo, ctx, m, fm, fntemplate, '', **opts)
 
 @command('^clone',
     [('U', 'noupdate', None, _('the clone will include an empty working '
                                'directory (only a repository)')),
     ('u', 'updaterev', '', _('revision, tag, or branch to check out'),
         _('REV')),
     ('r', 'rev', [], _('include the specified changeset'), _('REV')),
     ('b', 'branch', [], _('clone only the specified branch'), _('BRANCH')),
     ('', 'pull', None, _('use pull protocol to copy metadata')),
     ('', 'uncompressed', None,
        _('an alias to --stream (DEPRECATED)')),
     ('', 'stream', None,
        _('clone with minimal data processing')),
     ] + remoteopts,
     _('[OPTION]... SOURCE [DEST]'),
     norepo=True)
 def clone(ui, source, dest=None, **opts):
     """make a copy of an existing repository
 
     Create a copy of an existing repository in a new directory.
 
     If no destination directory name is specified, it defaults to the
     basename of the source.
 
     The location of the source is added to the new repository's
     ``.hg/hgrc`` file, as the default to be used for future pulls.
 
     Only local paths and ``ssh://`` URLs are supported as
     destinations. For ``ssh://`` destinations, no working directory or
     ``.hg/hgrc`` will be created on the remote side.
 
     If the source repository has a bookmark called '@' set, that
     revision will be checked out in the new repository by default.
 
     To check out a particular version, use -u/--update, or
     -U/--noupdate to create a clone with no working directory.
 
     To pull only a subset of changesets, specify one or more revisions
     identifiers with -r/--rev or branches with -b/--branch. The
     resulting clone will contain only the specified changesets and
     their ancestors. These options (or 'clone src#rev dest') imply
     --pull, even for local source repositories.
 
     In normal clone mode, the remote normalizes repository data into a common
     exchange format and the receiving end translates this data into its local
     storage format. --stream activates a different clone mode that essentially
     copies repository files from the remote with minimal data processing. This
     significantly reduces the CPU cost of a clone both remotely and locally.
     However, it often increases the transferred data size by 30-40%. This can
     result in substantially faster clones where I/O throughput is plentiful,
     especially for larger repositories. A side-effect of --stream clones is
     that storage settings and requirements on the remote are applied locally:
     a modern client may inherit legacy or inefficient storage used by the
     remote or a legacy Mercurial client may not be able to clone from a
     modern Mercurial remote.
 
     .. note::
 
        Specifying a tag will include the tagged changeset but not the
        changeset containing the tag.
 
     .. container:: verbose
 
       For efficiency, hardlinks are used for cloning whenever the
       source and destination are on the same filesystem (note this
       applies only to the repository data, not to the working
       directory). Some filesystems, such as AFS, implement hardlinking
       incorrectly, but do not report errors. In these cases, use the
       --pull option to avoid hardlinking.
 
       Mercurial will update the working directory to the first applicable
       revision from this list:
 
       a) null if -U or the source repository has no changesets
       b) if -u . and the source repository is local, the first parent of
          the source repository's working directory
       c) the changeset specified with -u (if a branch name, this means the
          latest head of that branch)
       d) the changeset specified with -r
       e) the tipmost head specified with -b
       f) the tipmost head specified with the url#branch source syntax
       g) the revision marked with the '@' bookmark, if present
       h) the tipmost head of the default branch
       i) tip
 
       When cloning from servers that support it, Mercurial may fetch
       pre-generated data from a server-advertised URL. When this is done,
       hooks operating on incoming changesets and changegroups may fire twice,
       once for the bundle fetched from the URL and another for any additional
       data not fetched from this URL. In addition, if an error occurs, the
       repository may be rolled back to a partial clone. This behavior may
       change in future releases. See :hg:`help -e clonebundles` for more.
 
       Examples:
 
       - clone a remote repository to a new directory named hg/::
 
           hg clone https://www.mercurial-scm.org/repo/hg/
 
       - create a lightweight local clone::
 
           hg clone project/ project-feature/
 
       - clone from an absolute path on an ssh server (note double-slash)::
 
           hg clone ssh://user@server//home/projects/alpha/
 
       - do a streaming clone while checking out a specified version::
 
           hg clone --stream http://server/repo -u 1.5
 
       - create a repository without changesets after a particular revision::
 
           hg clone -r 04e544 experimental/ good/
 
       - clone (and track) a particular named branch::
 
           hg clone https://www.mercurial-scm.org/repo/hg/#stable
 
     See :hg:`help urls` for details on specifying URLs.
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     if opts.get('noupdate') and opts.get('updaterev'):
         raise error.Abort(_("cannot specify both --noupdate and --updaterev"))
 
     r = hg.clone(ui, opts, source, dest,
                  pull=opts.get('pull'),
                  stream=opts.get('stream') or opts.get('uncompressed'),
                  rev=opts.get('rev'),
                  update=opts.get('updaterev') or not opts.get('noupdate'),
                  branch=opts.get('branch'),
                  shareopts=opts.get('shareopts'))
 
     return r is None
 
 @command('^commit|ci',
     [('A', 'addremove', None,
      _('mark new/missing files as added/removed before committing')),
     ('', 'close-branch', None,
      _('mark a branch head as closed')),
     ('', 'amend', None, _('amend the parent of the working directory')),
     ('s', 'secret', None, _('use the secret phase for committing')),
     ('e', 'edit', None, _('invoke editor on commit messages')),
     ('i', 'interactive', None, _('use interactive mode')),
     ] + walkopts + commitopts + commitopts2 + subrepoopts,
     _('[OPTION]... [FILE]...'),
     inferrepo=True)
 def commit(ui, repo, *pats, **opts):
     """commit the specified files or all outstanding changes
 
     Commit changes to the given files into the repository. Unlike a
     centralized SCM, this operation is a local operation. See
     :hg:`push` for a way to actively distribute your changes.
 
     If a list of files is omitted, all changes reported by :hg:`status`
     will be committed.
 
     If you are committing the result of a merge, do not provide any
     filenames or -I/-X filters.
 
     If no commit message is specified, Mercurial starts your
     configured editor where you can enter a message. In case your
     commit fails, you will find a backup of your message in
     ``.hg/last-message.txt``.
 
     The --close-branch flag can be used to mark the current branch
     head closed. When all heads of a branch are closed, the branch
     will be considered closed and no longer listed.
 
     The --amend flag can be used to amend the parent of the
     working directory with a new commit that contains the changes
     in the parent in addition to those currently reported by :hg:`status`,
     if there are any. The old commit is stored in a backup bundle in
     ``.hg/strip-backup`` (see :hg:`help bundle` and :hg:`help unbundle`
     on how to restore it).
 
     Message, user and date are taken from the amended commit unless
     specified. When a message isn't specified on the command line,
     the editor will open with the message of the amended commit.
 
     It is not possible to amend public changesets (see :hg:`help phases`)
     or changesets that have children.
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     Returns 0 on success, 1 if nothing changed.
 
     .. container:: verbose
 
       Examples:
 
       - commit all files ending in .py::
 
           hg commit --include "set:**.py"
 
       - commit all non-binary files::
 
           hg commit --exclude "set:binary()"
 
       - amend the current commit and set the date to now::
 
           hg commit --amend --date now
     """
     wlock = lock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         return _docommit(ui, repo, *pats, **opts)
     finally:
         release(lock, wlock)
 
 def _docommit(ui, repo, *pats, **opts):
     if opts.get(r'interactive'):
         opts.pop(r'interactive')
         ret = cmdutil.dorecord(ui, repo, commit, None, False,
                                cmdutil.recordfilter, *pats,
                                **opts)
         # ret can be 0 (no changes to record) or the value returned by
         # commit(), 1 if nothing changed or None on success.
         return 1 if ret == 0 else ret
 
     opts = pycompat.byteskwargs(opts)
     if opts.get('subrepos'):
         if opts.get('amend'):
             raise error.Abort(_('cannot amend with --subrepos'))
         # Let --subrepos on the command line override config setting.
         ui.setconfig('ui', 'commitsubrepos', True, 'commit')
 
     cmdutil.checkunfinished(repo, commit=True)
 
     branch = repo[None].branch()
     bheads = repo.branchheads(branch)
 
     extra = {}
     if opts.get('close_branch'):
         extra['close'] = 1
 
         if not bheads:
             raise error.Abort(_('can only close branch heads'))
         elif opts.get('amend'):
             if repo[None].parents()[0].p1().branch() != branch and \
                     repo[None].parents()[0].p2().branch() != branch:
                 raise error.Abort(_('can only close branch heads'))
 
     if opts.get('amend'):
         if ui.configbool('ui', 'commitsubrepos'):
             raise error.Abort(_('cannot amend with ui.commitsubrepos enabled'))
 
         old = repo['.']
         if not old.mutable():
             raise error.Abort(_('cannot amend public changesets'))
         if len(repo[None].parents()) > 1:
             raise error.Abort(_('cannot amend while merging'))
         allowunstable = obsolete.isenabled(repo, obsolete.allowunstableopt)
         if not allowunstable and old.children():
             raise error.Abort(_('cannot amend changeset with children'))
 
         # Currently histedit gets confused if an amend happens while histedit
         # is in progress. Since we have a checkunfinished command, we are
         # temporarily honoring it.
         #
         # Note: eventually this guard will be removed. Please do not expect
         # this behavior to remain.
         if not obsolete.isenabled(repo, obsolete.createmarkersopt):
             cmdutil.checkunfinished(repo)
 
         node = cmdutil.amend(ui, repo, old, extra, pats, opts)
         if node == old.node():
             ui.status(_("nothing changed\n"))
             return 1
     else:
         def commitfunc(ui, repo, message, match, opts):
             overrides = {}
             if opts.get('secret'):
                 overrides[('phases', 'new-commit')] = 'secret'
 
             baseui = repo.baseui
             with baseui.configoverride(overrides, 'commit'):
                 with ui.configoverride(overrides, 'commit'):
                     editform = cmdutil.mergeeditform(repo[None],
                                                      'commit.normal')
                     editor = cmdutil.getcommiteditor(
                         editform=editform, **pycompat.strkwargs(opts))
                     return repo.commit(message,
                                        opts.get('user'),
                                        opts.get('date'),
                                        match,
                                        editor=editor,
                                        extra=extra)
 
         node = cmdutil.commit(ui, repo, commitfunc, pats, opts)
 
         if not node:
             stat = cmdutil.postcommitstatus(repo, pats, opts)
             if stat[3]:
                 ui.status(_("nothing changed (%d missing files, see "
                             "'hg status')\n") % len(stat[3]))
             else:
                 ui.status(_("nothing changed\n"))
             return 1
 
     cmdutil.commitstatus(repo, node, branch, bheads, opts)
 
 @command('config|showconfig|debugconfig',
     [('u', 'untrusted', None, _('show untrusted configuration options')),
      ('e', 'edit', None, _('edit user config')),
      ('l', 'local', None, _('edit repository config')),
      ('g', 'global', None, _('edit global config'))] + formatteropts,
     _('[-u] [NAME]...'),
     optionalrepo=True)
 def config(ui, repo, *values, **opts):
     """show combined config settings from all hgrc files
 
     With no arguments, print names and values of all config items.
 
     With one argument of the form section.name, print just the value
     of that config item.
 
     With multiple arguments, print names and values of all config
     items with matching section names.
 
     With --edit, start an editor on the user-level config file. With
     --global, edit the system-wide config file. With --local, edit the
     repository-level config file.
 
     With --debug, the source (filename and line number) is printed
     for each config item.
 
     See :hg:`help config` for more information about config files.
 
     Returns 0 on success, 1 if NAME does not exist.
 
     """
 
     opts = pycompat.byteskwargs(opts)
     if opts.get('edit') or opts.get('local') or opts.get('global'):
         if opts.get('local') and opts.get('global'):
             raise error.Abort(_("can't use --local and --global together"))
 
         if opts.get('local'):
             if not repo:
                 raise error.Abort(_("can't use --local outside a repository"))
             paths = [repo.vfs.join('hgrc')]
         elif opts.get('global'):
             paths = rcutil.systemrcpath()
         else:
             paths = rcutil.userrcpath()
 
         for f in paths:
             if os.path.exists(f):
                 break
         else:
             if opts.get('global'):
                 samplehgrc = uimod.samplehgrcs['global']
             elif opts.get('local'):
                 samplehgrc = uimod.samplehgrcs['local']
             else:
                 samplehgrc = uimod.samplehgrcs['user']
 
             f = paths[0]
             fp = open(f, "wb")
             fp.write(util.tonativeeol(samplehgrc))
             fp.close()
 
         editor = ui.geteditor()
         ui.system("%s \"%s\"" % (editor, f),
                   onerr=error.Abort, errprefix=_("edit failed"),
                   blockedtag='config_edit')
         return
     ui.pager('config')
     fm = ui.formatter('config', opts)
     for t, f in rcutil.rccomponents():
         if t == 'path':
             ui.debug('read config from: %s\n' % f)
         elif t == 'items':
             for section, name, value, source in f:
                 ui.debug('set config by: %s\n' % source)
         else:
             raise error.ProgrammingError('unknown rctype: %s' % t)
     untrusted = bool(opts.get('untrusted'))
     if values:
         sections = [v for v in values if '.' not in v]
         items = [v for v in values if '.' in v]
         if len(items) > 1 or items and sections:
             raise error.Abort(_('only one config item permitted'))
     matched = False
     for section, name, value in ui.walkconfig(untrusted=untrusted):
         source = ui.configsource(section, name, untrusted)
         value = pycompat.bytestr(value)
         if fm.isplain():
             source = source or 'none'
             value = value.replace('\n', '\\n')
         entryname = section + '.' + name
         if values:
             for v in values:
                 if v == section:
                     fm.startitem()
                     fm.condwrite(ui.debugflag, 'source', '%s: ', source)
                     fm.write('name value', '%s=%s\n', entryname, value)
                     matched = True
                 elif v == entryname:
                     fm.startitem()
                     fm.condwrite(ui.debugflag, 'source', '%s: ', source)
                     fm.write('value', '%s\n', value)
                     fm.data(name=entryname)
                     matched = True
         else:
             fm.startitem()
             fm.condwrite(ui.debugflag, 'source', '%s: ', source)
             fm.write('name value', '%s=%s\n', entryname, value)
             matched = True
     fm.end()
     if matched:
         return 0
     return 1
 
 @command('copy|cp',
     [('A', 'after', None, _('record a copy that has already occurred')),
     ('f', 'force', None, _('forcibly copy over an existing managed file')),
     ] + walkopts + dryrunopts,
     _('[OPTION]... [SOURCE]... DEST'))
 def copy(ui, repo, *pats, **opts):
     """mark files as copied for the next commit
 
     Mark dest as having copies of source files. If dest is a
     directory, copies are put in that directory. If dest is a file,
     the source must be a single file.
 
     By default, this command copies the contents of files as they
     exist in the working directory. If invoked with -A/--after, the
     operation is recorded, but no copying is performed.
 
     This command takes effect with the next commit. To undo a copy
     before that, see :hg:`revert`.
 
     Returns 0 on success, 1 if errors are encountered.
     """
     opts = pycompat.byteskwargs(opts)
     with repo.wlock(False):
         return cmdutil.copy(ui, repo, pats, opts)
 
 @command('debugcommands', [], _('[COMMAND]'), norepo=True)
 def debugcommands(ui, cmd='', *args):
     """list all available commands and options"""
     for cmd, vals in sorted(table.iteritems()):
         cmd = cmd.split('|')[0].strip('^')
         opts = ', '.join([i[1] for i in vals[1]])
         ui.write('%s: %s\n' % (cmd, opts))
 
 @command('debugcomplete',
     [('o', 'options', None, _('show the command options'))],
     _('[-o] CMD'),
     norepo=True)
 def debugcomplete(ui, cmd='', **opts):
     """returns the completion list associated with the given command"""
 
     if opts.get('options'):
         options = []
         otables = [globalopts]
         if cmd:
             aliases, entry = cmdutil.findcmd(cmd, table, False)
             otables.append(entry[1])
         for t in otables:
             for o in t:
                 if "(DEPRECATED)" in o[3]:
                     continue
                 if o[0]:
                     options.append('-%s' % o[0])
                 options.append('--%s' % o[1])
         ui.write("%s\n" % "\n".join(options))
         return
 
     cmdlist, unused_allcmds = cmdutil.findpossible(cmd, table)
     if ui.verbose:
         cmdlist = [' '.join(c[0]) for c in cmdlist.values()]
     ui.write("%s\n" % "\n".join(sorted(cmdlist)))
 
 @command('^diff',
     [('r', 'rev', [], _('revision'), _('REV')),
     ('c', 'change', '', _('change made by revision'), _('REV'))
     ] + diffopts + diffopts2 + walkopts + subrepoopts,
     _('[OPTION]... ([-c REV] | [-r REV1 [-r REV2]]) [FILE]...'),
     inferrepo=True)
 def diff(ui, repo, *pats, **opts):
     """diff repository (or selected files)
 
     Show differences between revisions for the specified files.
 
     Differences between files are shown using the unified diff format.
 
     .. note::
 
        :hg:`diff` may generate unexpected results for merges, as it will
        default to comparing against the working directory's first
        parent changeset if no revisions are specified.
 
     When two revision arguments are given, then changes are shown
     between those revisions. If only one revision is specified then
     that revision is compared to the working directory, and, when no
     revisions are specified, the working directory files are compared
     to its first parent.
 
     Alternatively you can specify -c/--change with a revision to see
     the changes in that changeset relative to its first parent.
 
     Without the -a/--text option, diff will avoid generating diffs of
     files it detects as binary. With -a, diff will generate a diff
     anyway, probably with undesirable results.
 
     Use the -g/--git option to generate diffs in the git extended diff
     format. For more information, read :hg:`help diffs`.
 
     .. container:: verbose
 
       Examples:
 
       - compare a file in the current working directory to its parent::
 
           hg diff foo.c
 
       - compare two historical versions of a directory, with rename info::
 
           hg diff --git -r 1.0:1.2 lib/
 
       - get change stats relative to the last change on some date::
 
           hg diff --stat -r "date('may 2')"
 
       - diff all newly-added files that contain a keyword::
 
           hg diff "set:added() and grep(GNU)"
 
       - compare a revision and its parents::
 
           hg diff -c 9353         # compare against first parent
           hg diff -r 9353^:9353   # same using revset syntax
           hg diff -r 9353^2:9353  # compare against the second parent
 
     Returns 0 on success.
     """
 
     opts = pycompat.byteskwargs(opts)
     revs = opts.get('rev')
     change = opts.get('change')
     stat = opts.get('stat')
     reverse = opts.get('reverse')
 
     if revs and change:
         msg = _('cannot specify --rev and --change at the same time')
         raise error.Abort(msg)
     elif change:
         node2 = scmutil.revsingle(repo, change, None).node()
         node1 = repo[node2].p1().node()
     else:
         node1, node2 = scmutil.revpair(repo, revs)
 
     if reverse:
         node1, node2 = node2, node1
 
     diffopts = patch.diffallopts(ui, opts)
     m = scmutil.match(repo[node2], pats, opts)
     ui.pager('diff')
     cmdutil.diffordiffstat(ui, repo, diffopts, node1, node2, m, stat=stat,
                            listsubrepos=opts.get('subrepos'),
                            root=opts.get('root'))
 
 @command('^export',
     [('o', 'output', '',
      _('print output to file with formatted name'), _('FORMAT')),
     ('', 'switch-parent', None, _('diff against the second parent')),
     ('r', 'rev', [], _('revisions to export'), _('REV')),
     ] + diffopts,
     _('[OPTION]... [-o OUTFILESPEC] [-r] [REV]...'))
 def export(ui, repo, *changesets, **opts):
     """dump the header and diffs for one or more changesets
 
     Print the changeset header and diffs for one or more revisions.
     If no revision is given, the parent of the working directory is used.
 
     The information shown in the changeset header is: author, date,
     branch name (if non-default), changeset hash, parent(s) and commit
     comment.
 
     .. note::
 
        :hg:`export` may generate unexpected diff output for merge
        changesets, as it will compare the merge changeset against its
        first parent only.
 
     Output may be to a file, in which case the name of the file is
     given using a format string. The formatting rules are as follows:
 
     :``%%``: literal "%" character
     :``%H``: changeset hash (40 hexadecimal digits)
     :``%N``: number of patches being generated
     :``%R``: changeset revision number
     :``%b``: basename of the exporting repository
     :``%h``: short-form changeset hash (12 hexadecimal digits)
     :``%m``: first line of the commit message (only alphanumeric characters)
     :``%n``: zero-padded sequence number, starting at 1
     :``%r``: zero-padded changeset revision number
 
     Without the -a/--text option, export will avoid generating diffs
     of files it detects as binary. With -a, export will generate a
     diff anyway, probably with undesirable results.
 
     Use the -g/--git option to generate diffs in the git extended diff
     format. See :hg:`help diffs` for more information.
 
     With the --switch-parent option, the diff will be against the
     second parent. It can be useful to review a merge.
 
     .. container:: verbose
 
       Examples:
 
       - use export and import to transplant a bugfix to the current
         branch::
 
           hg export -r 9353 | hg import -
 
       - export all the changesets between two revisions to a file with
         rename information::
 
           hg export --git -r 123:150 > changes.txt
 
       - split outgoing changes into a series of patches with
         descriptive names::
 
           hg export -r "outgoing()" -o "%n-%m.patch"
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     changesets += tuple(opts.get('rev', []))
     if not changesets:
         changesets = ['.']
     revs = scmutil.revrange(repo, changesets)
     if not revs:
         raise error.Abort(_("export requires at least one changeset"))
     if len(revs) > 1:
         ui.note(_('exporting patches:\n'))
     else:
         ui.note(_('exporting patch:\n'))
     ui.pager('export')
     cmdutil.export(repo, revs, fntemplate=opts.get('output'),
                  switch_parent=opts.get('switch_parent'),
                  opts=patch.diffallopts(ui, opts))
 
 @command('files',
     [('r', 'rev', '', _('search the repository as it is in REV'), _('REV')),
      ('0', 'print0', None, _('end filenames with NUL, for use with xargs')),
     ] + walkopts + formatteropts + subrepoopts,
     _('[OPTION]... [FILE]...'))
 def files(ui, repo, *pats, **opts):
     """list tracked files
 
     Print files under Mercurial control in the working directory or
     specified revision for given files (excluding removed files).
     Files can be specified as filenames or filesets.
 
     If no files are given to match, this command prints the names
     of all files under Mercurial control.
 
     .. container:: verbose
 
       Examples:
 
       - list all files under the current directory::
 
           hg files .
 
       - shows sizes and flags for current revision::
 
           hg files -vr .
 
       - list all files named README::
 
           hg files -I "**/README"
 
       - list all binary files::
 
           hg files "set:binary()"
 
       - find files containing a regular expression::
 
           hg files "set:grep('bob')"
 
       - search tracked file contents with xargs and grep::
 
           hg files -0 | xargs -0 grep foo
 
     See :hg:`help patterns` and :hg:`help filesets` for more information
     on specifying file patterns.
 
     Returns 0 if a match is found, 1 otherwise.
 
     """
 
     opts = pycompat.byteskwargs(opts)
     ctx = scmutil.revsingle(repo, opts.get('rev'), None)
 
     end = '\n'
     if opts.get('print0'):
         end = '\0'
     fmt = '%s' + end
 
     m = scmutil.match(ctx, pats, opts)
     ui.pager('files')
     with ui.formatter('files', opts) as fm:
         return cmdutil.files(ui, ctx, m, fm, fmt, opts.get('subrepos'))
 
 @command('^forget', walkopts, _('[OPTION]... FILE...'), inferrepo=True)
 def forget(ui, repo, *pats, **opts):
     """forget the specified files on the next commit
 
     Mark the specified files so they will no longer be tracked
     after the next commit.
 
     This only removes files from the current branch, not from the
     entire project history, and it does not delete them from the
     working directory.
 
     To delete the file from the working directory, see :hg:`remove`.
 
     To undo a forget before the next commit, see :hg:`add`.
 
     .. container:: verbose
 
       Examples:
 
       - forget newly-added binary files::
 
           hg forget "set:added() and binary()"
 
       - forget files that would be excluded by .hgignore::
 
           hg forget "set:hgignore()"
 
     Returns 0 on success.
     """
 
     opts = pycompat.byteskwargs(opts)
     if not pats:
         raise error.Abort(_('no files specified'))
 
     m = scmutil.match(repo[None], pats, opts)
     rejected = cmdutil.forget(ui, repo, m, prefix="", explicitonly=False)[0]
     return rejected and 1 or 0
 
 @command(
     'graft',
     [('r', 'rev', [], _('revisions to graft'), _('REV')),
      ('c', 'continue', False, _('resume interrupted graft')),
      ('e', 'edit', False, _('invoke editor on commit messages')),
      ('', 'log', None, _('append graft info to log message')),
      ('f', 'force', False, _('force graft')),
      ('D', 'currentdate', False,
       _('record the current date as commit date')),
      ('U', 'currentuser', False,
       _('record the current user as committer'), _('DATE'))]
     + commitopts2 + mergetoolopts  + dryrunopts,
     _('[OPTION]... [-r REV]... REV...'))
 def graft(ui, repo, *revs, **opts):
     '''copy changes from other branches onto the current branch
 
     This command uses Mercurial's merge logic to copy individual
     changes from other branches without merging branches in the
     history graph. This is sometimes known as 'backporting' or
     'cherry-picking'. By default, graft will copy user, date, and
     description from the source changesets.
 
     Changesets that are ancestors of the current revision, that have
     already been grafted, or that are merges will be skipped.
 
     If --log is specified, log messages will have a comment appended
     of the form::
 
       (grafted from CHANGESETHASH)
 
     If --force is specified, revisions will be grafted even if they
-    are already ancestors of or have been grafted to the destination.
+    are already ancestors of, or have been grafted to, the destination.
     This is useful when the revisions have since been backed out.
 
     If a graft merge results in conflicts, the graft process is
     interrupted so that the current merge can be manually resolved.
     Once all conflicts are addressed, the graft process can be
     continued with the -c/--continue option.
 
     .. note::
 
        The -c/--continue option does not reapply earlier options, except
        for --force.
 
     .. container:: verbose
 
       Examples:
 
       - copy a single change to the stable branch and edit its description::
 
           hg update stable
           hg graft --edit 9393
 
       - graft a range of changesets with one exception, updating dates::
 
           hg graft -D "2085::2093 and not 2091"
 
       - continue a graft after resolving conflicts::
 
           hg graft -c
 
       - show the source of a grafted changeset::
 
           hg log --debug -r .
 
       - show revisions sorted by date::
 
           hg log -r "sort(all(), date)"
 
     See :hg:`help revisions` for more about specifying revisions.
 
     Returns 0 on successful completion.
     '''
     with repo.wlock():
         return _dograft(ui, repo, *revs, **opts)
 
 def _dograft(ui, repo, *revs, **opts):
     opts = pycompat.byteskwargs(opts)
     if revs and opts.get('rev'):
         ui.warn(_('warning: inconsistent use of --rev might give unexpected '
                   'revision ordering!\n'))
 
     revs = list(revs)
     revs.extend(opts.get('rev'))
 
     if not opts.get('user') and opts.get('currentuser'):
         opts['user'] = ui.username()
     if not opts.get('date') and opts.get('currentdate'):
         opts['date'] = "%d %d" % util.makedate()
 
     editor = cmdutil.getcommiteditor(editform='graft',
                                      **pycompat.strkwargs(opts))
 
     cont = False
     if opts.get('continue'):
         cont = True
         if revs:
             raise error.Abort(_("can't specify --continue and revisions"))
         # read in unfinished revisions
         try:
             nodes = repo.vfs.read('graftstate').splitlines()
             revs = [repo[node].rev() for node in nodes]
         except IOError as inst:
             if inst.errno != errno.ENOENT:
                 raise
             cmdutil.wrongtooltocontinue(repo, _('graft'))
     else:
         cmdutil.checkunfinished(repo)
         cmdutil.bailifchanged(repo)
         if not revs:
             raise error.Abort(_('no revisions specified'))
         revs = scmutil.revrange(repo, revs)
 
     skipped = set()
     # check for merges
     for rev in repo.revs('%ld and merge()', revs):
         ui.warn(_('skipping ungraftable merge revision %d\n') % rev)
         skipped.add(rev)
     revs = [r for r in revs if r not in skipped]
     if not revs:
         return -1
 
     # Don't check in the --continue case, in effect retaining --force across
     # --continues. That's because without --force, any revisions we decided to
     # skip would have been filtered out here, so they wouldn't have made their
     # way to the graftstate. With --force, any revisions we would have otherwise
     # skipped would not have been filtered out, and if they hadn't been applied
     # already, they'd have been in the graftstate.
     if not (cont or opts.get('force')):
         # check for ancestors of dest branch
         crev = repo['.'].rev()
         ancestors = repo.changelog.ancestors([crev], inclusive=True)
         # XXX make this lazy in the future
         # don't mutate while iterating, create a copy
         for rev in list(revs):
             if rev in ancestors:
                 ui.warn(_('skipping ancestor revision %d:%s\n') %
                         (rev, repo[rev]))
                 # XXX remove on list is slow
                 revs.remove(rev)
         if not revs:
             return -1
 
         # analyze revs for earlier grafts
         ids = {}
         for ctx in repo.set("%ld", revs):
             ids[ctx.hex()] = ctx.rev()
             n = ctx.extra().get('source')
             if n:
                 ids[n] = ctx.rev()
 
         # check ancestors for earlier grafts
         ui.debug('scanning for duplicate grafts\n')
 
         # The only changesets we can be sure doesn't contain grafts of any
         # revs, are the ones that are common ancestors of *all* revs:
         for rev in repo.revs('only(%d,ancestor(%ld))', crev, revs):
             ctx = repo[rev]
             n = ctx.extra().get('source')
             if n in ids:
                 try:
                     r = repo[n].rev()
                 except error.RepoLookupError:
                     r = None
                 if r in revs:
                     ui.warn(_('skipping revision %d:%s '
                               '(already grafted to %d:%s)\n')
                             % (r, repo[r], rev, ctx))
                     revs.remove(r)
                 elif ids[n] in revs:
                     if r is None:
                         ui.warn(_('skipping already grafted revision %d:%s '
                                   '(%d:%s also has unknown origin %s)\n')
                                 % (ids[n], repo[ids[n]], rev, ctx, n[:12]))
                     else:
                         ui.warn(_('skipping already grafted revision %d:%s '
                                   '(%d:%s also has origin %d:%s)\n')
                                 % (ids[n], repo[ids[n]], rev, ctx, r, n[:12]))
                     revs.remove(ids[n])
             elif ctx.hex() in ids:
                 r = ids[ctx.hex()]
                 ui.warn(_('skipping already grafted revision %d:%s '
                           '(was grafted from %d:%s)\n') %
                         (r, repo[r], rev, ctx))
                 revs.remove(r)
         if not revs:
             return -1
 
     for pos, ctx in enumerate(repo.set("%ld", revs)):
         desc = '%d:%s "%s"' % (ctx.rev(), ctx,
                                ctx.description().split('\n', 1)[0])
         names = repo.nodetags(ctx.node()) + repo.nodebookmarks(ctx.node())
         if names:
             desc += ' (%s)' % ' '.join(names)
         ui.status(_('grafting %s\n') % desc)
         if opts.get('dry_run'):
             continue
 
         source = ctx.extra().get('source')
         extra = {}
         if source:
             extra['source'] = source
             extra['intermediate-source'] = ctx.hex()
         else:
             extra['source'] = ctx.hex()
         user = ctx.user()
         if opts.get('user'):
             user = opts['user']
         date = ctx.date()
         if opts.get('date'):
             date = opts['date']
         message = ctx.description()
         if opts.get('log'):
             message += '\n(grafted from %s)' % ctx.hex()
 
         # we don't merge the first commit when continuing
         if not cont:
             # perform the graft merge with p1(rev) as 'ancestor'
             try:
                 # ui.forcemerge is an internal variable, do not document
                 repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                                   'graft')
                 stats = mergemod.graft(repo, ctx, ctx.p1(),
                                        ['local', 'graft'])
             finally:
                 repo.ui.setconfig('ui', 'forcemerge', '', 'graft')
             # report any conflicts
             if stats and stats[3] > 0:
                 # write out state for --continue
                 nodelines = [repo[rev].hex() + "\n" for rev in revs[pos:]]
                 repo.vfs.write('graftstate', ''.join(nodelines))
                 extra = ''
                 if opts.get('user'):
                     extra += ' --user %s' % util.shellquote(opts['user'])
                 if opts.get('date'):
                     extra += ' --date %s' % util.shellquote(opts['date'])
                 if opts.get('log'):
                     extra += ' --log'
                 hint=_("use 'hg resolve' and 'hg graft --continue%s'") % extra
                 raise error.Abort(
                     _("unresolved conflicts, can't continue"),
                     hint=hint)
         else:
             cont = False
 
         # commit
         node = repo.commit(text=message, user=user,
                     date=date, extra=extra, editor=editor)
         if node is None:
             ui.warn(
                 _('note: graft of %d:%s created no changes to commit\n') %
                 (ctx.rev(), ctx))
 
     # remove state when we complete successfully
     if not opts.get('dry_run'):
         repo.vfs.unlinkpath('graftstate', ignoremissing=True)
 
     return 0
 
 @command('grep',
     [('0', 'print0', None, _('end fields with NUL')),
     ('', 'all', None, _('print all revisions that match')),
     ('a', 'text', None, _('treat all files as text')),
     ('f', 'follow', None,
      _('follow changeset history,'
        ' or file history across copies and renames')),
     ('i', 'ignore-case', None, _('ignore case when matching')),
     ('l', 'files-with-matches', None,
      _('print only filenames and revisions that match')),
     ('n', 'line-number', None, _('print matching line numbers')),
     ('r', 'rev', [],
      _('only search files changed within revision range'), _('REV')),
     ('u', 'user', None, _('list the author (long with -v)')),
     ('d', 'date', None, _('list the date (short with -q)')),
     ] + formatteropts + walkopts,
     _('[OPTION]... PATTERN [FILE]...'),
     inferrepo=True)
 def grep(ui, repo, pattern, *pats, **opts):
     """search revision history for a pattern in specified files
 
     Search revision history for a regular expression in the specified
     files or the entire project.
 
     By default, grep prints the most recent revision number for each
     file in which it finds a match. To get it to print every revision
     that contains a change in match status ("-" for a match that becomes
     a non-match, or "+" for a non-match that becomes a match), use the
     --all flag.
 
     PATTERN can be any Python (roughly Perl-compatible) regular
     expression.
 
     If no FILEs are specified (and -f/--follow isn't set), all files in
     the repository are searched, including those that don't exist in the
     current branch or have been deleted in a prior changeset.
 
     Returns 0 if a match is found, 1 otherwise.
     """
     opts = pycompat.byteskwargs(opts)
     reflags = re.M
     if opts.get('ignore_case'):
         reflags |= re.I
     try:
         regexp = util.re.compile(pattern, reflags)
     except re.error as inst:
         ui.warn(_("grep: invalid match pattern: %s\n") % inst)
         return 1
     sep, eol = ':', '\n'
     if opts.get('print0'):
         sep = eol = '\0'
 
     getfile = util.lrucachefunc(repo.file)
 
     def matchlines(body):
         begin = 0
         linenum = 0
         while begin < len(body):
             match = regexp.search(body, begin)
             if not match:
                 break
             mstart, mend = match.span()
             linenum += body.count('\n', begin, mstart) + 1
             lstart = body.rfind('\n', begin, mstart) + 1 or begin
             begin = body.find('\n', mend) + 1 or len(body) + 1
             lend = begin - 1
             yield linenum, mstart - lstart, mend - lstart, body[lstart:lend]
 
     class linestate(object):
         def __init__(self, line, linenum, colstart, colend):
             self.line = line
             self.linenum = linenum
             self.colstart = colstart
             self.colend = colend
 
         def __hash__(self):
             return hash((self.linenum, self.line))
 
         def __eq__(self, other):
             return self.line == other.line
 
         def findpos(self):
             """Iterate all (start, end) indices of matches"""
             yield self.colstart, self.colend
             p = self.colend
             while p < len(self.line):
                 m = regexp.search(self.line, p)
                 if not m:
                     break
                 yield m.span()
                 p = m.end()
 
     matches = {}
     copies = {}
     def grepbody(fn, rev, body):
         matches[rev].setdefault(fn, [])
         m = matches[rev][fn]
         for lnum, cstart, cend, line in matchlines(body):
             s = linestate(line, lnum, cstart, cend)
             m.append(s)
 
     def difflinestates(a, b):
         sm = difflib.SequenceMatcher(None, a, b)
         for tag, alo, ahi, blo, bhi in sm.get_opcodes():
             if tag == 'insert':
                 for i in xrange(blo, bhi):
                     yield ('+', b[i])
             elif tag == 'delete':
                 for i in xrange(alo, ahi):
                     yield ('-', a[i])
             elif tag == 'replace':
                 for i in xrange(alo, ahi):
                     yield ('-', a[i])
                 for i in xrange(blo, bhi):
                     yield ('+', b[i])
 
     def display(fm, fn, ctx, pstates, states):
         rev = ctx.rev()
         if fm.isplain():
             formatuser = ui.shortuser
         else:
             formatuser = str
         if ui.quiet:
             datefmt = '%Y-%m-%d'
         else:
             datefmt = '%a %b %d %H:%M:%S %Y %1%2'
         found = False
         @util.cachefunc
         def binary():
             flog = getfile(fn)
             return util.binary(flog.read(ctx.filenode(fn)))
 
         fieldnamemap = {'filename': 'file', 'linenumber': 'line_number'}
         if opts.get('all'):
             iter = difflinestates(pstates, states)
         else:
             iter = [('', l) for l in states]
         for change, l in iter:
             fm.startitem()
             fm.data(node=fm.hexfunc(ctx.node()))
             cols = [
                 ('filename', fn, True),
                 ('rev', rev, True),
                 ('linenumber', l.linenum, opts.get('line_number')),
             ]
             if opts.get('all'):
                 cols.append(('change', change, True))
             cols.extend([
                 ('user', formatuser(ctx.user()), opts.get('user')),
                 ('date', fm.formatdate(ctx.date(), datefmt), opts.get('date')),
             ])
             lastcol = next(name for name, data, cond in reversed(cols) if cond)
             for name, data, cond in cols:
                 field = fieldnamemap.get(name, name)
                 fm.condwrite(cond, field, '%s', data, label='grep.%s' % name)
                 if cond and name != lastcol:
                     fm.plain(sep, label='grep.sep')
             if not opts.get('files_with_matches'):
                 fm.plain(sep, label='grep.sep')
                 if not opts.get('text') and binary():
                     fm.plain(_(" Binary file matches"))
                 else:
                     displaymatches(fm.nested('texts'), l)
             fm.plain(eol)
             found = True
             if opts.get('files_with_matches'):
                 break
         return found
 
     def displaymatches(fm, l):
         p = 0
         for s, e in l.findpos():
             if p < s:
                 fm.startitem()
                 fm.write('text', '%s', l.line[p:s])
                 fm.data(matched=False)
             fm.startitem()
             fm.write('text', '%s', l.line[s:e], label='grep.match')
             fm.data(matched=True)
             p = e
         if p < len(l.line):
             fm.startitem()
             fm.write('text', '%s', l.line[p:])
             fm.data(matched=False)
         fm.end()
 
     skip = {}
     revfiles = {}
     match = scmutil.match(repo[None], pats, opts)
     found = False
     follow = opts.get('follow')
 
     def prep(ctx, fns):
         rev = ctx.rev()
         pctx = ctx.p1()
         parent = pctx.rev()
         matches.setdefault(rev, {})
         matches.setdefault(parent, {})
         files = revfiles.setdefault(rev, [])
         for fn in fns:
             flog = getfile(fn)
             try:
                 fnode = ctx.filenode(fn)
             except error.LookupError:
                 continue
 
             copied = flog.renamed(fnode)
             copy = follow and copied and copied[0]
             if copy:
                 copies.setdefault(rev, {})[fn] = copy
             if fn in skip:
                 if copy:
                     skip[copy] = True
                 continue
             files.append(fn)
 
             if fn not in matches[rev]:
                 grepbody(fn, rev, flog.read(fnode))
 
             pfn = copy or fn
             if pfn not in matches[parent]:
                 try:
                     fnode = pctx.filenode(pfn)
                     grepbody(pfn, parent, flog.read(fnode))
                 except error.LookupError:
                     pass
 
     ui.pager('grep')
     fm = ui.formatter('grep', opts)
     for ctx in cmdutil.walkchangerevs(repo, match, opts, prep):
         rev = ctx.rev()
         parent = ctx.p1().rev()
         for fn in sorted(revfiles.get(rev, [])):
             states = matches[rev][fn]
             copy = copies.get(rev, {}).get(fn)
             if fn in skip:
                 if copy:
                     skip[copy] = True
                 continue
             pstates = matches.get(parent, {}).get(copy or fn, [])
             if pstates or states:
                 r = display(fm, fn, ctx, pstates, states)
                 found = found or r
                 if r and not opts.get('all'):
                     skip[fn] = True
                     if copy:
                         skip[copy] = True
         del matches[rev]
         del revfiles[rev]
     fm.end()
 
     return not found
 
 @command('heads',
     [('r', 'rev', '',
      _('show only heads which are descendants of STARTREV'), _('STARTREV')),
     ('t', 'topo', False, _('show topological heads only')),
     ('a', 'active', False, _('show active branchheads only (DEPRECATED)')),
     ('c', 'closed', False, _('show normal and closed branch heads')),
     ] + templateopts,
     _('[-ct] [-r STARTREV] [REV]...'))
 def heads(ui, repo, *branchrevs, **opts):
     """show branch heads
 
     With no arguments, show all open branch heads in the repository.
     Branch heads are changesets that have no descendants on the
     same branch. They are where development generally takes place and
     are the usual targets for update and merge operations.
 
     If one or more REVs are given, only open branch heads on the
     branches associated with the specified changesets are shown. This
     means that you can use :hg:`heads .` to see the heads on the
     currently checked-out branch.
 
     If -c/--closed is specified, also show branch heads marked closed
     (see :hg:`commit --close-branch`).
 
     If STARTREV is specified, only those heads that are descendants of
     STARTREV will be displayed.
 
     If -t/--topo is specified, named branch mechanics will be ignored and only
     topological heads (changesets with no children) will be shown.
 
     Returns 0 if matching heads are found, 1 if not.
     """
 
     opts = pycompat.byteskwargs(opts)
     start = None
     if 'rev' in opts:
         start = scmutil.revsingle(repo, opts['rev'], None).node()
 
     if opts.get('topo'):
         heads = [repo[h] for h in repo.heads(start)]
     else:
         heads = []
         for branch in repo.branchmap():
             heads += repo.branchheads(branch, start, opts.get('closed'))
         heads = [repo[h] for h in heads]
 
     if branchrevs:
         branches = set(repo[br].branch() for br in branchrevs)
         heads = [h for h in heads if h.branch() in branches]
 
     if opts.get('active') and branchrevs:
         dagheads = repo.heads(start)
         heads = [h for h in heads if h.node() in dagheads]
 
     if branchrevs:
         haveheads = set(h.branch() for h in heads)
         if branches - haveheads:
             headless = ', '.join(b for b in branches - haveheads)
             msg = _('no open branch heads found on branches %s')
             if opts.get('rev'):
                 msg += _(' (started at %s)') % opts['rev']
             ui.warn((msg + '\n') % headless)
 
     if not heads:
         return 1
 
     ui.pager('heads')
     heads = sorted(heads, key=lambda x: -x.rev())
     displayer = cmdutil.show_changeset(ui, repo, opts)
     for ctx in heads:
         displayer.show(ctx)
     displayer.close()
 
 @command('help',
     [('e', 'extension', None, _('show only help for extensions')),
      ('c', 'command', None, _('show only help for commands')),
      ('k', 'keyword', None, _('show topics matching keyword')),
      ('s', 'system', [], _('show help for specific platform(s)')),
      ],
     _('[-ecks] [TOPIC]'),
     norepo=True)
 def help_(ui, name=None, **opts):
     """show help for a given topic or a help overview
 
     With no arguments, print a list of commands with short help messages.
 
     Given a topic, extension, or command name, print help for that
     topic.
 
     Returns 0 if successful.
     """
 
     keep = opts.get(r'system') or []
     if len(keep) == 0:
         if pycompat.sysplatform.startswith('win'):
             keep.append('windows')
         elif pycompat.sysplatform == 'OpenVMS':
             keep.append('vms')
         elif pycompat.sysplatform == 'plan9':
             keep.append('plan9')
         else:
             keep.append('unix')
             keep.append(pycompat.sysplatform.lower())
     if ui.verbose:
         keep.append('verbose')
 
     commands = sys.modules[__name__]
     formatted = help.formattedhelp(ui, commands, name, keep=keep, **opts)
     ui.pager('help')
     ui.write(formatted)
 
 
 @command('identify|id',
     [('r', 'rev', '',
      _('identify the specified revision'), _('REV')),
     ('n', 'num', None, _('show local revision number')),
     ('i', 'id', None, _('show global revision id')),
     ('b', 'branch', None, _('show branch')),
     ('t', 'tags', None, _('show tags')),
     ('B', 'bookmarks', None, _('show bookmarks')),
     ] + remoteopts + formatteropts,
     _('[-nibtB] [-r REV] [SOURCE]'),
     optionalrepo=True)
 def identify(ui, repo, source=None, rev=None,
              num=None, id=None, branch=None, tags=None, bookmarks=None, **opts):
     """identify the working directory or specified revision
 
     Print a summary identifying the repository state at REV using one or
     two parent hash identifiers, followed by a "+" if the working
     directory has uncommitted changes, the branch name (if not default),
     a list of tags, and a list of bookmarks.
 
     When REV is not given, print a summary of the current state of the
     repository.
 
     Specifying a path to a repository root or Mercurial bundle will
     cause lookup to operate on that repository/bundle.
 
     .. container:: verbose
 
       Examples:
 
       - generate a build identifier for the working directory::
 
           hg id --id > build-id.dat
 
       - find the revision corresponding to a tag::
 
           hg id -n -r 1.3
 
       - check the most recent revision of a remote repository::
 
           hg id -r tip https://www.mercurial-scm.org/repo/hg/
 
     See :hg:`log` for generating more information about specific revisions,
     including full hash identifiers.
 
     Returns 0 if successful.
     """
 
     opts = pycompat.byteskwargs(opts)
     if not repo and not source:
         raise error.Abort(_("there is no Mercurial repository here "
                            "(.hg not found)"))
 
     if ui.debugflag:
         hexfunc = hex
     else:
         hexfunc = short
     default = not (num or id or branch or tags or bookmarks)
     output = []
     revs = []
 
     if source:
         source, branches = hg.parseurl(ui.expandpath(source))
         peer = hg.peer(repo or ui, opts, source) # only pass ui when no repo
         repo = peer.local()
         revs, checkout = hg.addbranchrevs(repo, peer, branches, None)
 
     fm = ui.formatter('identify', opts)
     fm.startitem()
 
     if not repo:
         if num or branch or tags:
             raise error.Abort(
                 _("can't query remote revision number, branch, or tags"))
         if not rev and revs:
             rev = revs[0]
         if not rev:
             rev = "tip"
 
         remoterev = peer.lookup(rev)
         hexrev = hexfunc(remoterev)
         if default or id:
             output = [hexrev]
         fm.data(id=hexrev)
 
         def getbms():
             bms = []
 
             if 'bookmarks' in peer.listkeys('namespaces'):
                 hexremoterev = hex(remoterev)
                 bms = [bm for bm, bmr in peer.listkeys('bookmarks').iteritems()
                        if bmr == hexremoterev]
 
             return sorted(bms)
 
         bms = getbms()
         if bookmarks:
             output.extend(bms)
         elif default and not ui.quiet:
             # multiple bookmarks for a single parent separated by '/'
             bm = '/'.join(bms)
             if bm:
                 output.append(bm)
 
         fm.data(node=hex(remoterev))
         fm.data(bookmarks=fm.formatlist(bms, name='bookmark'))
     else:
         ctx = scmutil.revsingle(repo, rev, None)
 
         if ctx.rev() is None:
             ctx = repo[None]
             parents = ctx.parents()
             taglist = []
             for p in parents:
                 taglist.extend(p.tags())
 
             dirty = ""
             if ctx.dirty(missing=True, merge=False, branch=False):
                 dirty = '+'
             fm.data(dirty=dirty)
 
             hexoutput = [hexfunc(p.node()) for p in parents]
             if default or id:
                 output = ["%s%s" % ('+'.join(hexoutput), dirty)]
             fm.data(id="%s%s" % ('+'.join(hexoutput), dirty))
 
             if num:
                 numoutput = ["%d" % p.rev() for p in parents]
                 output.append("%s%s" % ('+'.join(numoutput), dirty))
 
             fn = fm.nested('parents')
             for p in parents:
                 fn.startitem()
                 fn.data(rev=p.rev())
                 fn.data(node=p.hex())
                 fn.context(ctx=p)
             fn.end()
         else:
             hexoutput = hexfunc(ctx.node())
             if default or id:
                 output = [hexoutput]
             fm.data(id=hexoutput)
 
             if num:
                 output.append(pycompat.bytestr(ctx.rev()))
             taglist = ctx.tags()
 
         if default and not ui.quiet:
             b = ctx.branch()
             if b != 'default':
                 output.append("(%s)" % b)
 
             # multiple tags for a single parent separated by '/'
             t = '/'.join(taglist)
             if t:
                 output.append(t)
 
             # multiple bookmarks for a single parent separated by '/'
             bm = '/'.join(ctx.bookmarks())
             if bm:
                 output.append(bm)
         else:
             if branch:
                 output.append(ctx.branch())
 
             if tags:
                 output.extend(taglist)
 
             if bookmarks:
                 output.extend(ctx.bookmarks())
 
         fm.data(node=ctx.hex())
         fm.data(branch=ctx.branch())
         fm.data(tags=fm.formatlist(taglist, name='tag', sep=':'))
         fm.data(bookmarks=fm.formatlist(ctx.bookmarks(), name='bookmark'))
         fm.context(ctx=ctx)
 
     fm.plain("%s\n" % ' '.join(output))
     fm.end()
 
 @command('import|patch',
     [('p', 'strip', 1,
      _('directory strip option for patch. This has the same '
        'meaning as the corresponding patch option'), _('NUM')),
     ('b', 'base', '', _('base path (DEPRECATED)'), _('PATH')),
     ('e', 'edit', False, _('invoke editor on commit messages')),
     ('f', 'force', None,
      _('skip check for outstanding uncommitted changes (DEPRECATED)')),
     ('', 'no-commit', None,
      _("don't commit, just update the working directory")),
     ('', 'bypass', None,
      _("apply patch without touching the working directory")),
     ('', 'partial', None,
      _('commit even if some hunks fail')),
     ('', 'exact', None,
      _('abort if patch would apply lossily')),
     ('', 'prefix', '',
      _('apply patch to subdirectory'), _('DIR')),
     ('', 'import-branch', None,
      _('use any branch information in patch (implied by --exact)'))] +
     commitopts + commitopts2 + similarityopts,
     _('[OPTION]... PATCH...'))
 def import_(ui, repo, patch1=None, *patches, **opts):
     """import an ordered set of patches
 
     Import a list of patches and commit them individually (unless
     --no-commit is specified).
 
     To read a patch from standard input (stdin), use "-" as the patch
     name. If a URL is specified, the patch will be downloaded from
     there.
 
     Import first applies changes to the working directory (unless
     --bypass is specified), import will abort if there are outstanding
     changes.
 
     Use --bypass to apply and commit patches directly to the
     repository, without affecting the working directory. Without
     --exact, patches will be applied on top of the working directory
     parent revision.
 
     You can import a patch straight from a mail message. Even patches
     as attachments work (to use the body part, it must have type
     text/plain or text/x-patch). From and Subject headers of email
     message are used as default committer and commit message. All
     text/plain body parts before first diff are added to the commit
     message.
 
     If the imported patch was generated by :hg:`export`, user and
     description from patch override values from message headers and
     body. Values given on command line with -m/--message and -u/--user
     override these.
 
     If --exact is specified, import will set the working directory to
     the parent of each patch before applying it, and will abort if the
     resulting changeset has a different ID than the one recorded in
     the patch. This will guard against various ways that portable
     patch formats and mail systems might fail to transfer Mercurial
     data or metadata. See :hg:`bundle` for lossless transmission.
 
     Use --partial to ensure a changeset will be created from the patch
     even if some hunks fail to apply. Hunks that fail to apply will be
     written to a <target-file>.rej file. Conflicts can then be resolved
     by hand before :hg:`commit --amend` is run to update the created
     changeset. This flag exists to let people import patches that
     partially apply without losing the associated metadata (author,
     date, description, ...).
 
     .. note::
 
        When no hunks apply cleanly, :hg:`import --partial` will create
        an empty changeset, importing only the patch metadata.
 
     With -s/--similarity, hg will attempt to discover renames and
     copies in the patch in the same way as :hg:`addremove`.
 
     It is possible to use external patch programs to perform the patch
     by setting the ``ui.patch`` configuration option. For the default
     internal tool, the fuzz can also be configured via ``patch.fuzz``.
     See :hg:`help config` for more information about configuration
     files and how to use these options.
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     .. container:: verbose
 
       Examples:
 
       - import a traditional patch from a website and detect renames::
 
           hg import -s 80 http://example.com/bugfix.patch
 
       - import a changeset from an hgweb server::
 
           hg import https://www.mercurial-scm.org/repo/hg/rev/5ca8c111e9aa
 
       - import all the patches in an Unix-style mbox::
 
           hg import incoming-patches.mbox
 
       - import patches from stdin::
 
           hg import -
 
       - attempt to exactly restore an exported changeset (not always
         possible)::
 
           hg import --exact proposed-fix.patch
 
       - use an external tool to apply a patch which is too fuzzy for
         the default internal tool.
 
           hg import --config ui.patch="patch --merge" fuzzy.patch
 
       - change the default fuzzing from 2 to a less strict 7
 
           hg import --config ui.fuzz=7 fuzz.patch
 
     Returns 0 on success, 1 on partial success (see --partial).
     """
 
     opts = pycompat.byteskwargs(opts)
     if not patch1:
         raise error.Abort(_('need at least one patch to import'))
 
     patches = (patch1,) + patches
 
     date = opts.get('date')
     if date:
         opts['date'] = util.parsedate(date)
 
     exact = opts.get('exact')
     update = not opts.get('bypass')
     if not update and opts.get('no_commit'):
         raise error.Abort(_('cannot use --no-commit with --bypass'))
     try:
         sim = float(opts.get('similarity') or 0)
     except ValueError:
         raise error.Abort(_('similarity must be a number'))
     if sim < 0 or sim > 100:
         raise error.Abort(_('similarity must be between 0 and 100'))
     if sim and not update:
         raise error.Abort(_('cannot use --similarity with --bypass'))
     if exact:
         if opts.get('edit'):
             raise error.Abort(_('cannot use --exact with --edit'))
         if opts.get('prefix'):
             raise error.Abort(_('cannot use --exact with --prefix'))
 
     base = opts["base"]
     wlock = dsguard = lock = tr = None
     msgs = []
     ret = 0
 
 
     try:
         wlock = repo.wlock()
 
         if update:
             cmdutil.checkunfinished(repo)
             if (exact or not opts.get('force')):
                 cmdutil.bailifchanged(repo)
 
         if not opts.get('no_commit'):
             lock = repo.lock()
             tr = repo.transaction('import')
         else:
             dsguard = dirstateguard.dirstateguard(repo, 'import')
         parents = repo[None].parents()
         for patchurl in patches:
             if patchurl == '-':
                 ui.status(_('applying patch from stdin\n'))
                 patchfile = ui.fin
                 patchurl = 'stdin'      # for error message
             else:
                 patchurl = os.path.join(base, patchurl)
                 ui.status(_('applying %s\n') % patchurl)
                 patchfile = hg.openpath(ui, patchurl)
 
             haspatch = False
             for hunk in patch.split(patchfile):
                 (msg, node, rej) = cmdutil.tryimportone(ui, repo, hunk,
                                                         parents, opts,
                                                         msgs, hg.clean)
                 if msg:
                     haspatch = True
                     ui.note(msg + '\n')
                 if update or exact:
                     parents = repo[None].parents()
                 else:
                     parents = [repo[node]]
                 if rej:
                     ui.write_err(_("patch applied partially\n"))
                     ui.write_err(_("(fix the .rej files and run "
                                    "`hg commit --amend`)\n"))
                     ret = 1
                     break
 
             if not haspatch:
                 raise error.Abort(_('%s: no diffs found') % patchurl)
 
         if tr:
             tr.close()
         if msgs:
             repo.savecommitmessage('\n* * *\n'.join(msgs))
         if dsguard:
             dsguard.close()
         return ret
     finally:
         if tr:
             tr.release()
         release(lock, dsguard, wlock)
 
 @command('incoming|in',
     [('f', 'force', None,
      _('run even if remote repository is unrelated')),
     ('n', 'newest-first', None, _('show newest record first')),
     ('', 'bundle', '',
      _('file to store the bundles into'), _('FILE')),
     ('r', 'rev', [], _('a remote changeset intended to be added'), _('REV')),
     ('B', 'bookmarks', False, _("compare bookmarks")),
     ('b', 'branch', [],
      _('a specific branch you would like to pull'), _('BRANCH')),
     ] + logopts + remoteopts + subrepoopts,
     _('[-p] [-n] [-M] [-f] [-r REV]... [--bundle FILENAME] [SOURCE]'))
 def incoming(ui, repo, source="default", **opts):
     """show new changesets found in source
 
     Show new changesets found in the specified path/URL or the default
     pull location. These are the changesets that would have been pulled
-    if a pull at the time you issued this command.
+    by :hg:`pull` at the time you issued this command.
 
     See pull for valid source format details.
 
     .. container:: verbose
 
       With -B/--bookmarks, the result of bookmark comparison between
       local and remote repositories is displayed. With -v/--verbose,
       status is also displayed for each bookmark like below::
 
         BM1               01234567890a added
         BM2               1234567890ab advanced
         BM3               234567890abc diverged
         BM4               34567890abcd changed
 
       The action taken locally when pulling depends on the
       status of each bookmark:
 
       :``added``: pull will create it
       :``advanced``: pull will update it
       :``diverged``: pull will create a divergent bookmark
       :``changed``: result depends on remote changesets
 
       From the point of view of pulling behavior, bookmark
       existing only in the remote repository are treated as ``added``,
       even if it is in fact locally deleted.
 
     .. container:: verbose
 
       For remote repository, using --bundle avoids downloading the
       changesets twice if the incoming is followed by a pull.
 
       Examples:
 
       - show incoming changes with patches and full description::
 
           hg incoming -vp
 
       - show incoming changes excluding merges, store a bundle::
 
           hg in -vpM --bundle incoming.hg
           hg pull incoming.hg
 
       - briefly list changes inside a bundle::
 
           hg in changes.hg -T "{desc|firstline}\\n"
 
     Returns 0 if there are incoming changes, 1 otherwise.
     """
     opts = pycompat.byteskwargs(opts)
     if opts.get('graph'):
         cmdutil.checkunsupportedgraphflags([], opts)
         def display(other, chlist, displayer):
             revdag = cmdutil.graphrevs(other, chlist, opts)
             cmdutil.displaygraph(ui, repo, revdag, displayer,
                                  graphmod.asciiedges)
 
         hg._incoming(display, lambda: 1, ui, repo, source, opts, buffered=True)
         return 0
 
     if opts.get('bundle') and opts.get('subrepos'):
         raise error.Abort(_('cannot combine --bundle and --subrepos'))
 
     if opts.get('bookmarks'):
         source, branches = hg.parseurl(ui.expandpath(source),
                                        opts.get('branch'))
         other = hg.peer(repo, opts, source)
         if 'bookmarks' not in other.listkeys('namespaces'):
             ui.warn(_("remote doesn't support bookmarks\n"))
             return 0
         ui.pager('incoming')
         ui.status(_('comparing with %s\n') % util.hidepassword(source))
         return bookmarks.incoming(ui, repo, other)
 
     repo._subtoppath = ui.expandpath(source)
     try:
         return hg.incoming(ui, repo, source, opts)
     finally:
         del repo._subtoppath
 
 
 @command('^init', remoteopts, _('[-e CMD] [--remotecmd CMD] [DEST]'),
          norepo=True)
 def init(ui, dest=".", **opts):
     """create a new repository in the given directory
 
     Initialize a new repository in the given directory. If the given
     directory does not exist, it will be created.
 
     If no directory is given, the current directory is used.
 
     It is possible to specify an ``ssh://`` URL as the destination.
     See :hg:`help urls` for more information.
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     hg.peer(ui, opts, ui.expandpath(dest), create=True)
 
 @command('locate',
     [('r', 'rev', '', _('search the repository as it is in REV'), _('REV')),
     ('0', 'print0', None, _('end filenames with NUL, for use with xargs')),
     ('f', 'fullpath', None, _('print complete paths from the filesystem root')),
     ] + walkopts,
     _('[OPTION]... [PATTERN]...'))
 def locate(ui, repo, *pats, **opts):
     """locate files matching specific patterns (DEPRECATED)
 
     Print files under Mercurial control in the working directory whose
     names match the given patterns.
 
     By default, this command searches all directories in the working
     directory. To search just the current directory and its
     subdirectories, use "--include .".
 
     If no patterns are given to match, this command prints the names
     of all files under Mercurial control in the working directory.
 
     If you want to feed the output of this command into the "xargs"
     command, use the -0 option to both this command and "xargs". This
     will avoid the problem of "xargs" treating single filenames that
     contain whitespace as multiple filenames.
 
     See :hg:`help files` for a more versatile command.
 
     Returns 0 if a match is found, 1 otherwise.
     """
     opts = pycompat.byteskwargs(opts)
     if opts.get('print0'):
         end = '\0'
     else:
         end = '\n'
     rev = scmutil.revsingle(repo, opts.get('rev'), None).node()
 
     ret = 1
     ctx = repo[rev]
     m = scmutil.match(ctx, pats, opts, default='relglob',
                       badfn=lambda x, y: False)
 
     ui.pager('locate')
     for abs in ctx.matches(m):
         if opts.get('fullpath'):
             ui.write(repo.wjoin(abs), end)
         else:
             ui.write(((pats and m.rel(abs)) or abs), end)
         ret = 0
 
     return ret
 
 @command('^log|history',
     [('f', 'follow', None,
      _('follow changeset history, or file history across copies and renames')),
     ('', 'follow-first', None,
      _('only follow the first parent of merge changesets (DEPRECATED)')),
     ('d', 'date', '', _('show revisions matching date spec'), _('DATE')),
     ('C', 'copies', None, _('show copied files')),
     ('k', 'keyword', [],
      _('do case-insensitive search for a given text'), _('TEXT')),
     ('r', 'rev', [], _('show the specified revision or revset'), _('REV')),
     ('L', 'line-range', [],
      _('follow line range of specified file (EXPERIMENTAL)'),
      _('FILE,RANGE')),
     ('', 'removed', None, _('include revisions where files were removed')),
     ('m', 'only-merges', None, _('show only merges (DEPRECATED)')),
     ('u', 'user', [], _('revisions committed by user'), _('USER')),
     ('', 'only-branch', [],
      _('show only changesets within the given named branch (DEPRECATED)'),
      _('BRANCH')),
     ('b', 'branch', [],
      _('show changesets within the given named branch'), _('BRANCH')),
     ('P', 'prune', [],
      _('do not display revision or any of its ancestors'), _('REV')),
     ] + logopts + walkopts,
     _('[OPTION]... [FILE]'),
     inferrepo=True)
 def log(ui, repo, *pats, **opts):
     """show revision history of entire repository or files
 
     Print the revision history of the specified files or the entire
     project.
 
     If no revision range is specified, the default is ``tip:0`` unless
     --follow is set, in which case the working directory parent is
     used as the starting revision.
 
     File history is shown without following rename or copy history of
     files. Use -f/--follow with a filename to follow history across
     renames and copies. --follow without a filename will only show
     ancestors or descendants of the starting revision.
 
     By default this command prints revision number and changeset id,
     tags, non-trivial parents, user, date and time, and a summary for
     each commit. When the -v/--verbose switch is used, the list of
     changed files and full commit message are shown.
 
     With --graph the revisions are shown as an ASCII art DAG with the most
     recent changeset at the top.
     'o' is a changeset, '@' is a working directory parent, 'x' is obsolete,
     and '+' represents a fork where the changeset from the lines below is a
     parent of the 'o' merge on the same line.
     Paths in the DAG are represented with '|', '/' and so forth. ':' in place
     of a '|' indicates one or more revisions in a path are omitted.
 
     .. container:: verbose
 
        Use -L/--line-range FILE,M:N options to follow the history of lines
        from M to N in FILE. With -p/--patch only diff hunks affecting
        specified line range will be shown. This option requires --follow;
        it can be specified multiple times. Currently, this option is not
        compatible with --graph. This option is experimental.
 
     .. note::
 
        :hg:`log --patch` may generate unexpected diff output for merge
        changesets, as it will only compare the merge changeset against
        its first parent. Also, only files different from BOTH parents
        will appear in files:.
 
     .. note::
 
        For performance reasons, :hg:`log FILE` may omit duplicate changes
        made on branches and will not show removals or mode changes. To
        see all such changes, use the --removed switch.
 
     .. container:: verbose
 
        .. note::
 
           The history resulting from -L/--line-range options depends on diff
           options; for instance if white-spaces are ignored, respective changes
           with only white-spaces in specified line range will not be listed.
 
     .. container:: verbose
 
       Some examples:
 
       - changesets with full descriptions and file lists::
 
           hg log -v
 
       - changesets ancestral to the working directory::
 
           hg log -f
 
       - last 10 commits on the current branch::
 
           hg log -l 10 -b .
 
       - changesets showing all modifications of a file, including removals::
 
           hg log --removed file.c
 
       - all changesets that touch a directory, with diffs, excluding merges::
 
           hg log -Mp lib/
 
       - all revision numbers that match a keyword::
 
           hg log -k bug --template "{rev}\\n"
 
       - the full hash identifier of the working directory parent::
 
           hg log -r . --template "{node}\\n"
 
       - list available log templates::
 
           hg log -T list
 
       - check if a given changeset is included in a tagged release::
 
           hg log -r "a21ccf and ancestor(1.9)"
 
       - find all changesets by some user in a date range::
 
           hg log -k alice -d "may 2008 to jul 2008"
 
       - summary of all changesets after the last tag::
 
           hg log -r "last(tagged())::" --template "{desc|firstline}\\n"
 
       - changesets touching lines 13 to 23 for file.c::
 
           hg log -L file.c,13:23
 
       - changesets touching lines 13 to 23 for file.c and lines 2 to 6 of
         main.c with patch::
 
           hg log -L file.c,13:23 -L main.c,2:6 -p
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     See :hg:`help revisions` for more about specifying and ordering
     revisions.
 
     See :hg:`help templates` for more about pre-packaged styles and
     specifying custom templates. The default template used by the log
     command can be customized via the ``ui.logtemplate`` configuration
     setting.
 
     Returns 0 on success.
 
     """
     opts = pycompat.byteskwargs(opts)
     linerange = opts.get('line_range')
 
     if linerange and not opts.get('follow'):
         raise error.Abort(_('--line-range requires --follow'))
 
     if linerange and pats:
         raise error.Abort(
             _('FILE arguments are not compatible with --line-range option')
         )
 
     if opts.get('follow') and opts.get('rev'):
         opts['rev'] = [revsetlang.formatspec('reverse(::%lr)', opts.get('rev'))]
         del opts['follow']
 
     if opts.get('graph'):
         if linerange:
             raise error.Abort(_('graph not supported with line range patterns'))
         return cmdutil.graphlog(ui, repo, pats, opts)
 
     revs, expr, filematcher = cmdutil.getlogrevs(repo, pats, opts)
     hunksfilter = None
 
     if linerange:
         revs, lrfilematcher, hunksfilter = cmdutil.getloglinerangerevs(
             repo, revs, opts)
 
         if filematcher is not None and lrfilematcher is not None:
             basefilematcher = filematcher
 
             def filematcher(rev):
                 files = (basefilematcher(rev).files()
                          + lrfilematcher(rev).files())
                 return scmutil.matchfiles(repo, files)
 
         elif filematcher is None:
             filematcher = lrfilematcher
 
     limit = cmdutil.loglimit(opts)
     count = 0
 
     getrenamed = None
     if opts.get('copies'):
         endrev = None
         if opts.get('rev'):
             endrev = scmutil.revrange(repo, opts.get('rev')).max() + 1
         getrenamed = templatekw.getrenamedfn(repo, endrev=endrev)
 
     ui.pager('log')
     displayer = cmdutil.show_changeset(ui, repo, opts, buffered=True)
     for rev in revs:
         if count == limit:
             break
         ctx = repo[rev]
         copies = None
         if getrenamed is not None and rev:
             copies = []
             for fn in ctx.files():
                 rename = getrenamed(fn, rev)
                 if rename:
                     copies.append((fn, rename[0]))
         if filematcher:
             revmatchfn = filematcher(ctx.rev())
         else:
             revmatchfn = None
         if hunksfilter:
             revhunksfilter = hunksfilter(rev)
         else:
             revhunksfilter = None
         displayer.show(ctx, copies=copies, matchfn=revmatchfn,
                        hunksfilterfn=revhunksfilter)
         if displayer.flush(ctx):
             count += 1
 
     displayer.close()
 
 @command('manifest',
     [('r', 'rev', '', _('revision to display'), _('REV')),
      ('', 'all', False, _("list files from all revisions"))]
          + formatteropts,
     _('[-r REV]'))
 def manifest(ui, repo, node=None, rev=None, **opts):
     """output the current or given revision of the project manifest
 
     Print a list of version controlled files for the given revision.
     If no revision is given, the first parent of the working directory
     is used, or the null revision if no revision is checked out.
 
     With -v, print file permissions, symlink and executable bits.
     With --debug, print file revision hashes.
 
     If option --all is specified, the list of all files from all revisions
     is printed. This includes deleted and renamed files.
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     fm = ui.formatter('manifest', opts)
 
     if opts.get('all'):
         if rev or node:
             raise error.Abort(_("can't specify a revision with --all"))
 
         res = []
         prefix = "data/"
         suffix = ".i"
         plen = len(prefix)
         slen = len(suffix)
         with repo.lock():
             for fn, b, size in repo.store.datafiles():
                 if size != 0 and fn[-slen:] == suffix and fn[:plen] == prefix:
                     res.append(fn[plen:-slen])
         ui.pager('manifest')
         for f in res:
             fm.startitem()
             fm.write("path", '%s\n', f)
         fm.end()
         return
 
     if rev and node:
         raise error.Abort(_("please specify just one revision"))
 
     if not node:
         node = rev
 
     char = {'l': '@', 'x': '*', '': ''}
     mode = {'l': '644', 'x': '755', '': '644'}
     ctx = scmutil.revsingle(repo, node)
     mf = ctx.manifest()
     ui.pager('manifest')
     for f in ctx:
         fm.startitem()
         fl = ctx[f].flags()
         fm.condwrite(ui.debugflag, 'hash', '%s ', hex(mf[f]))
         fm.condwrite(ui.verbose, 'mode type', '%s %1s ', mode[fl], char[fl])
         fm.write('path', '%s\n', f)
     fm.end()
 
 @command('^merge',
     [('f', 'force', None,
       _('force a merge including outstanding changes (DEPRECATED)')),
     ('r', 'rev', '', _('revision to merge'), _('REV')),
     ('P', 'preview', None,
      _('review revisions to merge (no merge is performed)'))
      ] + mergetoolopts,
     _('[-P] [[-r] REV]'))
 def merge(ui, repo, node=None, **opts):
     """merge another revision into working directory
 
     The current working directory is updated with all changes made in
     the requested revision since the last common predecessor revision.
 
     Files that changed between either parent are marked as changed for
     the next commit and a commit must be performed before any further
     updates to the repository are allowed. The next commit will have
     two parents.
 
     ``--tool`` can be used to specify the merge tool used for file
     merges. It overrides the HGMERGE environment variable and your
     configuration files. See :hg:`help merge-tools` for options.
 
     If no revision is specified, the working directory's parent is a
     head revision, and the current branch contains exactly one other
     head, the other head is merged with by default. Otherwise, an
     explicit revision with which to merge with must be provided.
 
     See :hg:`help resolve` for information on handling file conflicts.
 
     To undo an uncommitted merge, use :hg:`update --clean .` which
     will check out a clean copy of the original merge parent, losing
     all changes.
 
     Returns 0 on success, 1 if there are unresolved files.
     """
 
     opts = pycompat.byteskwargs(opts)
     if opts.get('rev') and node:
         raise error.Abort(_("please specify just one revision"))
     if not node:
         node = opts.get('rev')
 
     if node:
         node = scmutil.revsingle(repo, node).node()
 
     if not node:
         node = repo[destutil.destmerge(repo)].node()
 
     if opts.get('preview'):
         # find nodes that are ancestors of p2 but not of p1
         p1 = repo.lookup('.')
         p2 = repo.lookup(node)
         nodes = repo.changelog.findmissing(common=[p1], heads=[p2])
 
         displayer = cmdutil.show_changeset(ui, repo, opts)
         for node in nodes:
             displayer.show(repo[node])
         displayer.close()
         return 0
 
     try:
         # ui.forcemerge is an internal variable, do not document
         repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''), 'merge')
         force = opts.get('force')
         labels = ['working copy', 'merge rev']
         return hg.merge(repo, node, force=force, mergeforce=force,
                         labels=labels)
     finally:
         ui.setconfig('ui', 'forcemerge', '', 'merge')
 
 @command('outgoing|out',
     [('f', 'force', None, _('run even when the destination is unrelated')),
     ('r', 'rev', [],
      _('a changeset intended to be included in the destination'), _('REV')),
     ('n', 'newest-first', None, _('show newest record first')),
     ('B', 'bookmarks', False, _('compare bookmarks')),
     ('b', 'branch', [], _('a specific branch you would like to push'),
      _('BRANCH')),
     ] + logopts + remoteopts + subrepoopts,
     _('[-M] [-p] [-n] [-f] [-r REV]... [DEST]'))
 def outgoing(ui, repo, dest=None, **opts):
     """show changesets not found in the destination
 
     Show changesets not found in the specified destination repository
     or the default push location. These are the changesets that would
     be pushed if a push was requested.
 
     See pull for details of valid destination formats.
 
     .. container:: verbose
 
       With -B/--bookmarks, the result of bookmark comparison between
       local and remote repositories is displayed. With -v/--verbose,
       status is also displayed for each bookmark like below::
 
         BM1               01234567890a added
         BM2                            deleted
         BM3               234567890abc advanced
         BM4               34567890abcd diverged
         BM5               4567890abcde changed
 
       The action taken when pushing depends on the
       status of each bookmark:
 
       :``added``: push with ``-B`` will create it
       :``deleted``: push with ``-B`` will delete it
       :``advanced``: push will update it
       :``diverged``: push with ``-B`` will update it
       :``changed``: push with ``-B`` will update it
 
       From the point of view of pushing behavior, bookmarks
       existing only in the remote repository are treated as
       ``deleted``, even if it is in fact added remotely.
 
     Returns 0 if there are outgoing changes, 1 otherwise.
     """
     opts = pycompat.byteskwargs(opts)
     if opts.get('graph'):
         cmdutil.checkunsupportedgraphflags([], opts)
         o, other = hg._outgoing(ui, repo, dest, opts)
         if not o:
             cmdutil.outgoinghooks(ui, repo, other, opts, o)
             return
 
         revdag = cmdutil.graphrevs(repo, o, opts)
         ui.pager('outgoing')
         displayer = cmdutil.show_changeset(ui, repo, opts, buffered=True)
         cmdutil.displaygraph(ui, repo, revdag, displayer, graphmod.asciiedges)
         cmdutil.outgoinghooks(ui, repo, other, opts, o)
         return 0
 
     if opts.get('bookmarks'):
         dest = ui.expandpath(dest or 'default-push', dest or 'default')
         dest, branches = hg.parseurl(dest, opts.get('branch'))
         other = hg.peer(repo, opts, dest)
         if 'bookmarks' not in other.listkeys('namespaces'):
             ui.warn(_("remote doesn't support bookmarks\n"))
             return 0
         ui.status(_('comparing with %s\n') % util.hidepassword(dest))
         ui.pager('outgoing')
         return bookmarks.outgoing(ui, repo, other)
 
     repo._subtoppath = ui.expandpath(dest or 'default-push', dest or 'default')
     try:
         return hg.outgoing(ui, repo, dest, opts)
     finally:
         del repo._subtoppath
 
 @command('parents',
     [('r', 'rev', '', _('show parents of the specified revision'), _('REV')),
     ] + templateopts,
     _('[-r REV] [FILE]'),
     inferrepo=True)
 def parents(ui, repo, file_=None, **opts):
     """show the parents of the working directory or revision (DEPRECATED)
 
     Print the working directory's parent revisions. If a revision is
     given via -r/--rev, the parent of that revision will be printed.
     If a file argument is given, the revision in which the file was
     last changed (before the working directory revision or the
     argument to --rev if given) is printed.
 
     This command is equivalent to::
 
         hg log -r "p1()+p2()" or
         hg log -r "p1(REV)+p2(REV)" or
         hg log -r "max(::p1() and file(FILE))+max(::p2() and file(FILE))" or
         hg log -r "max(::p1(REV) and file(FILE))+max(::p2(REV) and file(FILE))"
 
     See :hg:`summary` and :hg:`help revsets` for related information.
 
     Returns 0 on success.
     """
 
     opts = pycompat.byteskwargs(opts)
     ctx = scmutil.revsingle(repo, opts.get('rev'), None)
 
     if file_:
         m = scmutil.match(ctx, (file_,), opts)
         if m.anypats() or len(m.files()) != 1:
             raise error.Abort(_('can only specify an explicit filename'))
         file_ = m.files()[0]
         filenodes = []
         for cp in ctx.parents():
             if not cp:
                 continue
             try:
                 filenodes.append(cp.filenode(file_))
             except error.LookupError:
                 pass
         if not filenodes:
             raise error.Abort(_("'%s' not found in manifest!") % file_)
         p = []
         for fn in filenodes:
             fctx = repo.filectx(file_, fileid=fn)
             p.append(fctx.node())
     else:
         p = [cp.node() for cp in ctx.parents()]
 
     displayer = cmdutil.show_changeset(ui, repo, opts)
     for n in p:
         if n != nullid:
             displayer.show(repo[n])
     displayer.close()
 
 @command('paths', formatteropts, _('[NAME]'), optionalrepo=True)
 def paths(ui, repo, search=None, **opts):
     """show aliases for remote repositories
 
     Show definition of symbolic path name NAME. If no name is given,
     show definition of all available names.
 
     Option -q/--quiet suppresses all output when searching for NAME
     and shows only the path names when listing all definitions.
 
     Path names are defined in the [paths] section of your
     configuration file and in ``/etc/mercurial/hgrc``. If run inside a
     repository, ``.hg/hgrc`` is used, too.
 
     The path names ``default`` and ``default-push`` have a special
     meaning.  When performing a push or pull operation, they are used
     as fallbacks if no location is specified on the command-line.
     When ``default-push`` is set, it will be used for push and
     ``default`` will be used for pull; otherwise ``default`` is used
     as the fallback for both.  When cloning a repository, the clone
     source is written as ``default`` in ``.hg/hgrc``.
 
     .. note::
 
        ``default`` and ``default-push`` apply to all inbound (e.g.
        :hg:`incoming`) and outbound (e.g. :hg:`outgoing`, :hg:`email`
        and :hg:`bundle`) operations.
 
     See :hg:`help urls` for more information.
 
     Returns 0 on success.
     """
 
     opts = pycompat.byteskwargs(opts)
     ui.pager('paths')
     if search:
         pathitems = [(name, path) for name, path in ui.paths.iteritems()
                      if name == search]
     else:
         pathitems = sorted(ui.paths.iteritems())
 
     fm = ui.formatter('paths', opts)
     if fm.isplain():
         hidepassword = util.hidepassword
     else:
         hidepassword = str
     if ui.quiet:
         namefmt = '%s\n'
     else:
         namefmt = '%s = '
     showsubopts = not search and not ui.quiet
 
     for name, path in pathitems:
         fm.startitem()
         fm.condwrite(not search, 'name', namefmt, name)
         fm.condwrite(not ui.quiet, 'url', '%s\n', hidepassword(path.rawloc))
         for subopt, value in sorted(path.suboptions.items()):
             assert subopt not in ('name', 'url')
             if showsubopts:
                 fm.plain('%s:%s = ' % (name, subopt))
             fm.condwrite(showsubopts, subopt, '%s\n', value)
 
     fm.end()
 
     if search and not pathitems:
         if not ui.quiet:
             ui.warn(_("not found!\n"))
         return 1
     else:
         return 0
 
 @command('phase',
     [('p', 'public', False, _('set changeset phase to public')),
      ('d', 'draft', False, _('set changeset phase to draft')),
      ('s', 'secret', False, _('set changeset phase to secret')),
      ('f', 'force', False, _('allow to move boundary backward')),
      ('r', 'rev', [], _('target revision'), _('REV')),
     ],
     _('[-p|-d|-s] [-f] [-r] [REV...]'))
 def phase(ui, repo, *revs, **opts):
     """set or show the current phase name
 
     With no argument, show the phase name of the current revision(s).
 
     With one of -p/--public, -d/--draft or -s/--secret, change the
     phase value of the specified revisions.
 
-    Unless -f/--force is specified, :hg:`phase` won't move changeset from a
-    lower phase to an higher phase. Phases are ordered as follows::
+    Unless -f/--force is specified, :hg:`phase` won't move changesets from a
+    lower phase to a higher phase. Phases are ordered as follows::
 
         public < draft < secret
 
     Returns 0 on success, 1 if some phases could not be changed.
 
     (For more information about the phases concept, see :hg:`help phases`.)
     """
     opts = pycompat.byteskwargs(opts)
     # search for a unique phase argument
     targetphase = None
     for idx, name in enumerate(phases.phasenames):
         if opts[name]:
             if targetphase is not None:
                 raise error.Abort(_('only one phase can be specified'))
             targetphase = idx
 
     # look for specified revision
     revs = list(revs)
     revs.extend(opts['rev'])
     if not revs:
         # display both parents as the second parent phase can influence
         # the phase of a merge commit
         revs = [c.rev() for c in repo[None].parents()]
 
     revs = scmutil.revrange(repo, revs)
 
     lock = None
     ret = 0
     if targetphase is None:
         # display
         for r in revs:
             ctx = repo[r]
             ui.write('%i: %s\n' % (ctx.rev(), ctx.phasestr()))
     else:
         tr = None
         lock = repo.lock()
         try:
             tr = repo.transaction("phase")
             # set phase
             if not revs:
                 raise error.Abort(_('empty revision set'))
             nodes = [repo[r].node() for r in revs]
             # moving revision from public to draft may hide them
             # We have to check result on an unfiltered repository
             unfi = repo.unfiltered()
             getphase = unfi._phasecache.phase
             olddata = [getphase(unfi, r) for r in unfi]
             phases.advanceboundary(repo, tr, targetphase, nodes)
             if opts['force']:
                 phases.retractboundary(repo, tr, targetphase, nodes)
             tr.close()
         finally:
             if tr is not None:
                 tr.release()
             lock.release()
         getphase = unfi._phasecache.phase
         newdata = [getphase(unfi, r) for r in unfi]
         changes = sum(newdata[r] != olddata[r] for r in unfi)
         cl = unfi.changelog
         rejected = [n for n in nodes
                     if newdata[cl.rev(n)] < targetphase]
         if rejected:
             ui.warn(_('cannot move %i changesets to a higher '
                       'phase, use --force\n') % len(rejected))
             ret = 1
         if changes:
             msg = _('phase changed for %i changesets\n') % changes
             if ret:
                 ui.status(msg)
             else:
                 ui.note(msg)
         else:
             ui.warn(_('no phases changed\n'))
     return ret
 
 def postincoming(ui, repo, modheads, optupdate, checkout, brev):
     """Run after a changegroup has been added via pull/unbundle
 
     This takes arguments below:
 
     :modheads: change of heads by pull/unbundle
     :optupdate: updating working directory is needed or not
     :checkout: update destination revision (or None to default destination)
     :brev: a name, which might be a bookmark to be activated after updating
     """
     if modheads == 0:
         return
     if optupdate:
         try:
             return hg.updatetotally(ui, repo, checkout, brev)
         except error.UpdateAbort as inst:
             msg = _("not updating: %s") % str(inst)
             hint = inst.hint
             raise error.UpdateAbort(msg, hint=hint)
     if modheads > 1:
         currentbranchheads = len(repo.branchheads())
         if currentbranchheads == modheads:
             ui.status(_("(run 'hg heads' to see heads, 'hg merge' to merge)\n"))
         elif currentbranchheads > 1:
             ui.status(_("(run 'hg heads .' to see heads, 'hg merge' to "
                         "merge)\n"))
         else:
             ui.status(_("(run 'hg heads' to see heads)\n"))
     elif not ui.configbool('commands', 'update.requiredest'):
         ui.status(_("(run 'hg update' to get a working copy)\n"))
 
 @command('^pull',
     [('u', 'update', None,
      _('update to new branch head if changesets were pulled')),
     ('f', 'force', None, _('run even when remote repository is unrelated')),
     ('r', 'rev', [], _('a remote changeset intended to be added'), _('REV')),
     ('B', 'bookmark', [], _("bookmark to pull"), _('BOOKMARK')),
     ('b', 'branch', [], _('a specific branch you would like to pull'),
      _('BRANCH')),
     ] + remoteopts,
     _('[-u] [-f] [-r REV]... [-e CMD] [--remotecmd CMD] [SOURCE]'))
 def pull(ui, repo, source="default", **opts):
     """pull changes from the specified source
 
     Pull changes from a remote repository to a local one.
 
     This finds all changes from the repository at the specified path
     or URL and adds them to a local repository (the current one unless
     -R is specified). By default, this does not update the copy of the
     project in the working directory.
 
     Use :hg:`incoming` if you want to see what would have been added
     by a pull at the time you issued this command. If you then decide
     to add those changes to the repository, you should use :hg:`pull
     -r X` where ``X`` is the last changeset listed by :hg:`incoming`.
 
     If SOURCE is omitted, the 'default' path will be used.
     See :hg:`help urls` for more information.
 
     Specifying bookmark as ``.`` is equivalent to specifying the active
     bookmark's name.
 
     Returns 0 on success, 1 if an update had unresolved files.
     """
 
     opts = pycompat.byteskwargs(opts)
     if ui.configbool('commands', 'update.requiredest') and opts.get('update'):
         msg = _('update destination required by configuration')
         hint = _('use hg pull followed by hg update DEST')
         raise error.Abort(msg, hint=hint)
 
     source, branches = hg.parseurl(ui.expandpath(source), opts.get('branch'))
     ui.status(_('pulling from %s\n') % util.hidepassword(source))
     other = hg.peer(repo, opts, source)
     try:
         revs, checkout = hg.addbranchrevs(repo, other, branches,
                                           opts.get('rev'))
 
 
         pullopargs = {}
         if opts.get('bookmark'):
             if not revs:
                 revs = []
             # The list of bookmark used here is not the one used to actually
             # update the bookmark name. This can result in the revision pulled
             # not ending up with the name of the bookmark because of a race
             # condition on the server. (See issue 4689 for details)
             remotebookmarks = other.listkeys('bookmarks')
             pullopargs['remotebookmarks'] = remotebookmarks
             for b in opts['bookmark']:
                 b = repo._bookmarks.expandname(b)
                 if b not in remotebookmarks:
                     raise error.Abort(_('remote bookmark %s not found!') % b)
                 revs.append(remotebookmarks[b])
 
         if revs:
             try:
                 # When 'rev' is a bookmark name, we cannot guarantee that it
                 # will be updated with that name because of a race condition
                 # server side. (See issue 4689 for details)
                 oldrevs = revs
                 revs = [] # actually, nodes
                 for r in oldrevs:
                     node = other.lookup(r)
                     revs.append(node)
                     if r == checkout:
                         checkout = node
             except error.CapabilityError:
                 err = _("other repository doesn't support revision lookup, "
                         "so a rev cannot be specified.")
                 raise error.Abort(err)
 
         pullopargs.update(opts.get('opargs', {}))
         modheads = exchange.pull(repo, other, heads=revs,
                                  force=opts.get('force'),
                                  bookmarks=opts.get('bookmark', ()),
                                  opargs=pullopargs).cgresult
 
         # brev is a name, which might be a bookmark to be activated at
         # the end of the update. In other words, it is an explicit
         # destination of the update
         brev = None
 
         if checkout:
             checkout = str(repo.changelog.rev(checkout))
 
             # order below depends on implementation of
             # hg.addbranchrevs(). opts['bookmark'] is ignored,
             # because 'checkout' is determined without it.
             if opts.get('rev'):
                 brev = opts['rev'][0]
             elif opts.get('branch'):
                 brev = opts['branch'][0]
             else:
                 brev = branches[0]
         repo._subtoppath = source
         try:
             ret = postincoming(ui, repo, modheads, opts.get('update'),
                                checkout, brev)
 
         finally:
             del repo._subtoppath
 
     finally:
         other.close()
     return ret
 
 @command('^push',
     [('f', 'force', None, _('force push')),
     ('r', 'rev', [],
      _('a changeset intended to be included in the destination'),
      _('REV')),
     ('B', 'bookmark', [], _("bookmark to push"), _('BOOKMARK')),
     ('b', 'branch', [],
      _('a specific branch you would like to push'), _('BRANCH')),
     ('', 'new-branch', False, _('allow pushing a new branch')),
     ('', 'pushvars', [], _('variables that can be sent to server (ADVANCED)')),
     ] + remoteopts,
     _('[-f] [-r REV]... [-e CMD] [--remotecmd CMD] [DEST]'))
 def push(ui, repo, dest=None, **opts):
     """push changes to the specified destination
 
     Push changesets from the local repository to the specified
     destination.
 
     This operation is symmetrical to pull: it is identical to a pull
     in the destination repository from the current one.
 
     By default, push will not allow creation of new heads at the
     destination, since multiple heads would make it unclear which head
     to use. In this situation, it is recommended to pull and merge
     before pushing.
 
     Use --new-branch if you want to allow push to create a new named
     branch that is not present at the destination. This allows you to
     only create a new branch without forcing other changes.
 
     .. note::
 
        Extra care should be taken with the -f/--force option,
        which will push all new heads on all branches, an action which will
        almost always cause confusion for collaborators.
 
     If -r/--rev is used, the specified revision and all its ancestors
     will be pushed to the remote repository.
 
     If -B/--bookmark is used, the specified bookmarked revision, its
     ancestors, and the bookmark will be pushed to the remote
     repository. Specifying ``.`` is equivalent to specifying the active
     bookmark's name.
 
     Please see :hg:`help urls` for important details about ``ssh://``
     URLs. If DESTINATION is omitted, a default path will be used.
 
     .. container:: verbose
 
         The --pushvars option sends strings to the server that become
         environment variables prepended with ``HG_USERVAR_``. For example,
         ``--pushvars ENABLE_FEATURE=true``, provides the server side hooks with
         ``HG_USERVAR_ENABLE_FEATURE=true`` as part of their environment.
 
         pushvars can provide for user-overridable hooks as well as set debug
         levels. One example is having a hook that blocks commits containing
         conflict markers, but enables the user to override the hook if the file
         is using conflict markers for testing purposes or the file format has
         strings that look like conflict markers.
 
         By default, servers will ignore `--pushvars`. To enable it add the
         following to your configuration file::
 
             [push]
             pushvars.server = true
 
     Returns 0 if push was successful, 1 if nothing to push.
     """
 
     opts = pycompat.byteskwargs(opts)
     if opts.get('bookmark'):
         ui.setconfig('bookmarks', 'pushing', opts['bookmark'], 'push')
         for b in opts['bookmark']:
             # translate -B options to -r so changesets get pushed
             b = repo._bookmarks.expandname(b)
             if b in repo._bookmarks:
                 opts.setdefault('rev', []).append(b)
             else:
                 # if we try to push a deleted bookmark, translate it to null
                 # this lets simultaneous -r, -b options continue working
                 opts.setdefault('rev', []).append("null")
 
     path = ui.paths.getpath(dest, default=('default-push', 'default'))
     if not path:
         raise error.Abort(_('default repository not configured!'),
                          hint=_("see 'hg help config.paths'"))
     dest = path.pushloc or path.loc
     branches = (path.branch, opts.get('branch') or [])
     ui.status(_('pushing to %s\n') % util.hidepassword(dest))
     revs, checkout = hg.addbranchrevs(repo, repo, branches, opts.get('rev'))
     other = hg.peer(repo, opts, dest)
 
     if revs:
         revs = [repo.lookup(r) for r in scmutil.revrange(repo, revs)]
         if not revs:
             raise error.Abort(_("specified revisions evaluate to an empty set"),
                              hint=_("use different revision arguments"))
     elif path.pushrev:
         # It doesn't make any sense to specify ancestor revisions. So limit
         # to DAG heads to make discovery simpler.
         expr = revsetlang.formatspec('heads(%r)', path.pushrev)
         revs = scmutil.revrange(repo, [expr])
         revs = [repo[rev].node() for rev in revs]
         if not revs:
             raise error.Abort(_('default push revset for path evaluates to an '
                                 'empty set'))
 
     repo._subtoppath = dest
     try:
         # push subrepos depth-first for coherent ordering
         c = repo['']
         subs = c.substate # only repos that are committed
         for s in sorted(subs):
             result = c.sub(s).push(opts)
             if result == 0:
                 return not result
     finally:
         del repo._subtoppath
 
     opargs = dict(opts.get('opargs', {})) # copy opargs since we may mutate it
     opargs.setdefault('pushvars', []).extend(opts.get('pushvars', []))
 
     pushop = exchange.push(repo, other, opts.get('force'), revs=revs,
                            newbranch=opts.get('new_branch'),
                            bookmarks=opts.get('bookmark', ()),
                            opargs=opargs)
 
     result = not pushop.cgresult
 
     if pushop.bkresult is not None:
         if pushop.bkresult == 2:
             result = 2
         elif not result and pushop.bkresult:
             result = 2
 
     return result
 
 @command('recover', [])
 def recover(ui, repo):
     """roll back an interrupted transaction
 
     Recover from an interrupted commit or pull.
 
     This command tries to fix the repository status after an
     interrupted operation. It should only be necessary when Mercurial
     suggests it.
 
     Returns 0 if successful, 1 if nothing to recover or verify fails.
     """
     if repo.recover():
         return hg.verify(repo)
     return 1
 
 @command('^remove|rm',
     [('A', 'after', None, _('record delete for missing files')),
     ('f', 'force', None,
      _('forget added files, delete modified files')),
     ] + subrepoopts + walkopts,
     _('[OPTION]... FILE...'),
     inferrepo=True)
 def remove(ui, repo, *pats, **opts):
     """remove the specified files on the next commit
 
     Schedule the indicated files for removal from the current branch.
 
     This command schedules the files to be removed at the next commit.
     To undo a remove before that, see :hg:`revert`. To undo added
     files, see :hg:`forget`.
 
     .. container:: verbose
 
       -A/--after can be used to remove only files that have already
       been deleted, -f/--force can be used to force deletion, and -Af
       can be used to remove files from the next revision without
       deleting them from the working directory.
 
       The following table details the behavior of remove for different
       file states (columns) and option combinations (rows). The file
       states are Added [A], Clean [C], Modified [M] and Missing [!]
       (as reported by :hg:`status`). The actions are Warn, Remove
       (from branch) and Delete (from disk):
 
       ========= == == == ==
       opt/state A  C  M  !
       ========= == == == ==
       none      W  RD W  R
       -f        R  RD RD R
       -A        W  W  W  R
       -Af       R  R  R  R
       ========= == == == ==
 
       .. note::
 
          :hg:`remove` never deletes files in Added [A] state from the
          working directory, not even if ``--force`` is specified.
 
     Returns 0 on success, 1 if any warnings encountered.
     """
 
     opts = pycompat.byteskwargs(opts)
     after, force = opts.get('after'), opts.get('force')
     if not pats and not after:
         raise error.Abort(_('no files specified'))
 
     m = scmutil.match(repo[None], pats, opts)
     subrepos = opts.get('subrepos')
     return cmdutil.remove(ui, repo, m, "", after, force, subrepos)
 
 @command('rename|move|mv',
     [('A', 'after', None, _('record a rename that has already occurred')),
     ('f', 'force', None, _('forcibly copy over an existing managed file')),
     ] + walkopts + dryrunopts,
     _('[OPTION]... SOURCE... DEST'))
 def rename(ui, repo, *pats, **opts):
     """rename files; equivalent of copy + remove
 
     Mark dest as copies of sources; mark sources for deletion. If dest
     is a directory, copies are put in that directory. If dest is a
     file, there can only be one source.
 
     By default, this command copies the contents of files as they
     exist in the working directory. If invoked with -A/--after, the
     operation is recorded, but no copying is performed.
 
     This command takes effect at the next commit. To undo a rename
     before that, see :hg:`revert`.
 
     Returns 0 on success, 1 if errors are encountered.
     """
     opts = pycompat.byteskwargs(opts)
     with repo.wlock(False):
         return cmdutil.copy(ui, repo, pats, opts, rename=True)
 
 @command('resolve',
     [('a', 'all', None, _('select all unresolved files')),
     ('l', 'list', None, _('list state of files needing merge')),
     ('m', 'mark', None, _('mark files as resolved')),
     ('u', 'unmark', None, _('mark files as unresolved')),
     ('n', 'no-status', None, _('hide status prefix'))]
     + mergetoolopts + walkopts + formatteropts,
     _('[OPTION]... [FILE]...'),
     inferrepo=True)
 def resolve(ui, repo, *pats, **opts):
     """redo merges or set/view the merge status of files
 
     Merges with unresolved conflicts are often the result of
     non-interactive merging using the ``internal:merge`` configuration
     setting, or a command-line merge tool like ``diff3``. The resolve
     command is used to manage the files involved in a merge, after
     :hg:`merge` has been run, and before :hg:`commit` is run (i.e. the
     working directory must have two parents). See :hg:`help
     merge-tools` for information on configuring merge tools.
 
     The resolve command can be used in the following ways:
 
     - :hg:`resolve [--tool TOOL] FILE...`: attempt to re-merge the specified
       files, discarding any previous merge attempts. Re-merging is not
       performed for files already marked as resolved. Use ``--all/-a``
       to select all unresolved files. ``--tool`` can be used to specify
       the merge tool used for the given files. It overrides the HGMERGE
       environment variable and your configuration files.  Previous file
       contents are saved with a ``.orig`` suffix.
 
     - :hg:`resolve -m [FILE]`: mark a file as having been resolved
       (e.g. after having manually fixed-up the files). The default is
       to mark all unresolved files.
 
     - :hg:`resolve -u [FILE]...`: mark a file as unresolved. The
       default is to mark all resolved files.
 
     - :hg:`resolve -l`: list files which had or still have conflicts.
       In the printed list, ``U`` = unresolved and ``R`` = resolved.
       You can use ``set:unresolved()`` or ``set:resolved()`` to filter
       the list. See :hg:`help filesets` for details.
 
     .. note::
 
        Mercurial will not let you commit files with unresolved merge
        conflicts. You must use :hg:`resolve -m ...` before you can
        commit after a conflicting merge.
 
     Returns 0 on success, 1 if any files fail a resolve attempt.
     """
 
     opts = pycompat.byteskwargs(opts)
     flaglist = 'all mark unmark list no_status'.split()
     all, mark, unmark, show, nostatus = \
         [opts.get(o) for o in flaglist]
 
     if (show and (mark or unmark)) or (mark and unmark):
         raise error.Abort(_("too many options specified"))
     if pats and all:
         raise error.Abort(_("can't specify --all and patterns"))
     if not (all or pats or show or mark or unmark):
         raise error.Abort(_('no files or directories specified'),
                          hint=('use --all to re-merge all unresolved files'))
 
     if show:
         ui.pager('resolve')
         fm = ui.formatter('resolve', opts)
         ms = mergemod.mergestate.read(repo)
         m = scmutil.match(repo[None], pats, opts)
 
         # Labels and keys based on merge state.  Unresolved path conflicts show
         # as 'P'.  Resolved path conflicts show as 'R', the same as normal
         # resolved conflicts.
         mergestateinfo = {
             'u': ('resolve.unresolved', 'U'),
             'r': ('resolve.resolved', 'R'),
             'pu': ('resolve.unresolved', 'P'),
             'pr': ('resolve.resolved', 'R'),
             'd': ('resolve.driverresolved', 'D'),
         }
 
         for f in ms:
             if not m(f):
                 continue
 
             label, key = mergestateinfo[ms[f]]
             fm.startitem()
             fm.condwrite(not nostatus, 'status', '%s ', key, label=label)
             fm.write('path', '%s\n', f, label=label)
         fm.end()
         return 0
 
     with repo.wlock():
         ms = mergemod.mergestate.read(repo)
 
         if not (ms.active() or repo.dirstate.p2() != nullid):
             raise error.Abort(
                 _('resolve command not applicable when not merging'))
 
         wctx = repo[None]
 
         if ms.mergedriver and ms.mdstate() == 'u':
             proceed = mergemod.driverpreprocess(repo, ms, wctx)
             ms.commit()
             # allow mark and unmark to go through
             if not mark and not unmark and not proceed:
                 return 1
 
         m = scmutil.match(wctx, pats, opts)
         ret = 0
         didwork = False
         runconclude = False
 
         tocomplete = []
         for f in ms:
             if not m(f):
                 continue
 
             didwork = True
 
             # don't let driver-resolved files be marked, and run the conclude
             # step if asked to resolve
             if ms[f] == "d":
                 exact = m.exact(f)
                 if mark:
                     if exact:
                         ui.warn(_('not marking %s as it is driver-resolved\n')
                                 % f)
                 elif unmark:
                     if exact:
                         ui.warn(_('not unmarking %s as it is driver-resolved\n')
                                 % f)
                 else:
                     runconclude = True
                 continue
 
             # path conflicts must be resolved manually
             if ms[f] in ("pu", "pr"):
                 if mark:
                     ms.mark(f, "pr")
                 elif unmark:
                     ms.mark(f, "pu")
                 elif ms[f] == "pu":
                     ui.warn(_('%s: path conflict must be resolved manually\n')
                             % f)
                 continue
 
             if mark:
                 ms.mark(f, "r")
             elif unmark:
                 ms.mark(f, "u")
             else:
                 # backup pre-resolve (merge uses .orig for its own purposes)
                 a = repo.wjoin(f)
                 try:
                     util.copyfile(a, a + ".resolve")
                 except (IOError, OSError) as inst:
                     if inst.errno != errno.ENOENT:
                         raise
 
                 try:
                     # preresolve file
                     ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                                  'resolve')
                     complete, r = ms.preresolve(f, wctx)
                     if not complete:
                         tocomplete.append(f)
                     elif r:
                         ret = 1
                 finally:
                     ui.setconfig('ui', 'forcemerge', '', 'resolve')
                     ms.commit()
 
                 # replace filemerge's .orig file with our resolve file, but only
                 # for merges that are complete
                 if complete:
                     try:
                         util.rename(a + ".resolve",
                                     scmutil.origpath(ui, repo, a))
                     except OSError as inst:
                         if inst.errno != errno.ENOENT:
                             raise
 
         for f in tocomplete:
             try:
                 # resolve file
                 ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                              'resolve')
                 r = ms.resolve(f, wctx)
                 if r:
                     ret = 1
             finally:
                 ui.setconfig('ui', 'forcemerge', '', 'resolve')
                 ms.commit()
 
             # replace filemerge's .orig file with our resolve file
             a = repo.wjoin(f)
             try:
                 util.rename(a + ".resolve", scmutil.origpath(ui, repo, a))
             except OSError as inst:
                 if inst.errno != errno.ENOENT:
                     raise
 
         ms.commit()
         ms.recordactions()
 
         if not didwork and pats:
             hint = None
             if not any([p for p in pats if p.find(':') >= 0]):
                 pats = ['path:%s' % p for p in pats]
                 m = scmutil.match(wctx, pats, opts)
                 for f in ms:
                     if not m(f):
                         continue
                     flags = ''.join(['-%s ' % o[0] for o in flaglist
                                                    if opts.get(o)])
                     hint = _("(try: hg resolve %s%s)\n") % (
                              flags,
                              ' '.join(pats))
                     break
             ui.warn(_("arguments do not match paths that need resolving\n"))
             if hint:
                 ui.warn(hint)
         elif ms.mergedriver and ms.mdstate() != 's':
             # run conclude step when either a driver-resolved file is requested
             # or there are no driver-resolved files
             # we can't use 'ret' to determine whether any files are unresolved
             # because we might not have tried to resolve some
             if ((runconclude or not list(ms.driverresolved()))
                 and not list(ms.unresolved())):
                 proceed = mergemod.driverconclude(repo, ms, wctx)
                 ms.commit()
                 if not proceed:
                     return 1
 
     # Nudge users into finishing an unfinished operation
     unresolvedf = list(ms.unresolved())
     driverresolvedf = list(ms.driverresolved())
     if not unresolvedf and not driverresolvedf:
         ui.status(_('(no more unresolved files)\n'))
         cmdutil.checkafterresolved(repo)
     elif not unresolvedf:
         ui.status(_('(no more unresolved files -- '
                     'run "hg resolve --all" to conclude)\n'))
 
     return ret
 
 @command('revert',
     [('a', 'all', None, _('revert all changes when no arguments given')),
     ('d', 'date', '', _('tipmost revision matching date'), _('DATE')),
     ('r', 'rev', '', _('revert to the specified revision'), _('REV')),
     ('C', 'no-backup', None, _('do not save backup copies of files')),
     ('i', 'interactive', None,
             _('interactively select the changes (EXPERIMENTAL)')),
     ] + walkopts + dryrunopts,
     _('[OPTION]... [-r REV] [NAME]...'))
 def revert(ui, repo, *pats, **opts):
     """restore files to their checkout state
 
     .. note::
 
        To check out earlier revisions, you should use :hg:`update REV`.
        To cancel an uncommitted merge (and lose your changes),
        use :hg:`update --clean .`.
 
     With no revision specified, revert the specified files or directories
     to the contents they had in the parent of the working directory.
     This restores the contents of files to an unmodified
     state and unschedules adds, removes, copies, and renames. If the
     working directory has two parents, you must explicitly specify a
     revision.
 
     Using the -r/--rev or -d/--date options, revert the given files or
     directories to their states as of a specific revision. Because
     revert does not change the working directory parents, this will
     cause these files to appear modified. This can be helpful to "back
     out" some or all of an earlier change. See :hg:`backout` for a
     related method.
 
     Modified files are saved with a .orig suffix before reverting.
     To disable these backups, use --no-backup. It is possible to store
     the backup files in a custom directory relative to the root of the
     repository by setting the ``ui.origbackuppath`` configuration
     option.
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     See :hg:`help backout` for a way to reverse the effect of an
     earlier changeset.
 
     Returns 0 on success.
     """
 
     if opts.get("date"):
         if opts.get("rev"):
             raise error.Abort(_("you can't specify a revision and a date"))
         opts["rev"] = cmdutil.finddate(ui, repo, opts["date"])
 
     parent, p2 = repo.dirstate.parents()
     if not opts.get('rev') and p2 != nullid:
         # revert after merge is a trap for new users (issue2915)
         raise error.Abort(_('uncommitted merge with no revision specified'),
                          hint=_("use 'hg update' or see 'hg help revert'"))
 
     ctx = scmutil.revsingle(repo, opts.get('rev'))
 
     if (not (pats or opts.get('include') or opts.get('exclude') or
              opts.get('all') or opts.get('interactive'))):
         msg = _("no files or directories specified")
         if p2 != nullid:
             hint = _("uncommitted merge, use --all to discard all changes,"
                      " or 'hg update -C .' to abort the merge")
             raise error.Abort(msg, hint=hint)
         dirty = any(repo.status())
         node = ctx.node()
         if node != parent:
             if dirty:
                 hint = _("uncommitted changes, use --all to discard all"
                          " changes, or 'hg update %s' to update") % ctx.rev()
             else:
                 hint = _("use --all to revert all files,"
                          " or 'hg update %s' to update") % ctx.rev()
         elif dirty:
             hint = _("uncommitted changes, use --all to discard all changes")
         else:
             hint = _("use --all to revert all files")
         raise error.Abort(msg, hint=hint)
 
     return cmdutil.revert(ui, repo, ctx, (parent, p2), *pats, **opts)
 
 @command('rollback', dryrunopts +
          [('f', 'force', False, _('ignore safety measures'))])
 def rollback(ui, repo, **opts):
     """roll back the last transaction (DANGEROUS) (DEPRECATED)
 
     Please use :hg:`commit --amend` instead of rollback to correct
     mistakes in the last commit.
 
     This command should be used with care. There is only one level of
     rollback, and there is no way to undo a rollback. It will also
     restore the dirstate at the time of the last transaction, losing
     any dirstate changes since that time. This command does not alter
     the working directory.
 
     Transactions are used to encapsulate the effects of all commands
     that create new changesets or propagate existing changesets into a
     repository.
 
     .. container:: verbose
 
       For example, the following commands are transactional, and their
       effects can be rolled back:
 
       - commit
       - import
       - pull
       - push (with this repository as the destination)
       - unbundle
 
       To avoid permanent data loss, rollback will refuse to rollback a
       commit transaction if it isn't checked out. Use --force to
       override this protection.
 
       The rollback command can be entirely disabled by setting the
       ``ui.rollback`` configuration setting to false. If you're here
       because you want to use rollback and it's disabled, you can
       re-enable the command by setting ``ui.rollback`` to true.
 
     This command is not intended for use on public repositories. Once
     changes are visible for pull by other users, rolling a transaction
     back locally is ineffective (someone else may already have pulled
     the changes). Furthermore, a race is possible with readers of the
     repository; for example an in-progress pull from the repository
     may fail if a rollback is performed.
 
     Returns 0 on success, 1 if no rollback data is available.
     """
     if not ui.configbool('ui', 'rollback'):
         raise error.Abort(_('rollback is disabled because it is unsafe'),
                           hint=('see `hg help -v rollback` for information'))
     return repo.rollback(dryrun=opts.get(r'dry_run'),
                          force=opts.get(r'force'))
 
 @command('root', [])
 def root(ui, repo):
     """print the root (top) of the current working directory
 
     Print the root directory of the current repository.
 
     Returns 0 on success.
     """
     ui.write(repo.root + "\n")
 
 @command('^serve',
     [('A', 'accesslog', '', _('name of access log file to write to'),
      _('FILE')),
     ('d', 'daemon', None, _('run server in background')),
     ('', 'daemon-postexec', [], _('used internally by daemon mode')),
     ('E', 'errorlog', '', _('name of error log file to write to'), _('FILE')),
     # use string type, then we can check if something was passed
     ('p', 'port', '', _('port to listen on (default: 8000)'), _('PORT')),
     ('a', 'address', '', _('address to listen on (default: all interfaces)'),
      _('ADDR')),
     ('', 'prefix', '', _('prefix path to serve from (default: server root)'),
      _('PREFIX')),
     ('n', 'name', '',
      _('name to show in web pages (default: working directory)'), _('NAME')),
     ('', 'web-conf', '',
      _("name of the hgweb config file (see 'hg help hgweb')"), _('FILE')),
     ('', 'webdir-conf', '', _('name of the hgweb config file (DEPRECATED)'),
      _('FILE')),
     ('', 'pid-file', '', _('name of file to write process ID to'), _('FILE')),
     ('', 'stdio', None, _('for remote clients (ADVANCED)')),
     ('', 'cmdserver', '', _('for remote clients (ADVANCED)'), _('MODE')),
     ('t', 'templates', '', _('web templates to use'), _('TEMPLATE')),
     ('', 'style', '', _('template style to use'), _('STYLE')),
     ('6', 'ipv6', None, _('use IPv6 in addition to IPv4')),
     ('', 'certificate', '', _('SSL certificate file'), _('FILE'))]
      + subrepoopts,
     _('[OPTION]...'),
     optionalrepo=True)
 def serve(ui, repo, **opts):
     """start stand-alone webserver
 
     Start a local HTTP repository browser and pull server. You can use
     this for ad-hoc sharing and browsing of repositories. It is
     recommended to use a real web server to serve a repository for
     longer periods of time.
 
     Please note that the server does not implement access control.
     This means that, by default, anybody can read from the server and
     nobody can write to it by default. Set the ``web.allow_push``
     option to ``*`` to allow everybody to push to the server. You
     should use a real web server if you need to authenticate users.
 
     By default, the server logs accesses to stdout and errors to
     stderr. Use the -A/--accesslog and -E/--errorlog options to log to
     files.
 
     To have the server choose a free port number to listen on, specify
     a port number of 0; in this case, the server will print the port
     number it uses.
 
     Returns 0 on success.
     """
 
     opts = pycompat.byteskwargs(opts)
     if opts["stdio"] and opts["cmdserver"]:
         raise error.Abort(_("cannot use --stdio with --cmdserver"))
 
     if opts["stdio"]:
         if repo is None:
             raise error.RepoError(_("there is no Mercurial repository here"
                                     " (.hg not found)"))
         s = sshserver.sshserver(ui, repo)
         s.serve_forever()
 
     service = server.createservice(ui, repo, opts)
     return server.runservice(opts, initfn=service.init, runfn=service.run)
 
 @command('^status|st',
     [('A', 'all', None, _('show status of all files')),
     ('m', 'modified', None, _('show only modified files')),
     ('a', 'added', None, _('show only added files')),
     ('r', 'removed', None, _('show only removed files')),
     ('d', 'deleted', None, _('show only deleted (but tracked) files')),
     ('c', 'clean', None, _('show only files without changes')),
     ('u', 'unknown', None, _('show only unknown (not tracked) files')),
     ('i', 'ignored', None, _('show only ignored files')),
     ('n', 'no-status', None, _('hide status prefix')),
     ('t', 'terse', '', _('show the terse output (EXPERIMENTAL)')),
     ('C', 'copies', None, _('show source of copied files')),
     ('0', 'print0', None, _('end filenames with NUL, for use with xargs')),
     ('', 'rev', [], _('show difference from revision'), _('REV')),
     ('', 'change', '', _('list the changed files of a revision'), _('REV')),
     ] + walkopts + subrepoopts + formatteropts,
     _('[OPTION]... [FILE]...'),
     inferrepo=True)
 def status(ui, repo, *pats, **opts):
     """show changed files in the working directory
 
     Show status of files in the repository. If names are given, only
     files that match are shown. Files that are clean or ignored or
     the source of a copy/move operation, are not listed unless
     -c/--clean, -i/--ignored, -C/--copies or -A/--all are given.
     Unless options described with "show only ..." are given, the
     options -mardu are used.
 
     Option -q/--quiet hides untracked (unknown and ignored) files
     unless explicitly requested with -u/--unknown or -i/--ignored.
 
     .. note::
 
        :hg:`status` may appear to disagree with diff if permissions have
        changed or a merge has occurred. The standard diff format does
        not report permission changes and diff only reports changes
        relative to one merge parent.
 
     If one revision is given, it is used as the base revision.
     If two revisions are given, the differences between them are
     shown. The --change option can also be used as a shortcut to list
     the changed files of a revision from its first parent.
 
     The codes used to show the status of files are::
 
       M = modified
       A = added
       R = removed
       C = clean
       ! = missing (deleted by non-hg command, but still tracked)
       ? = not tracked
       I = ignored
         = origin of the previous file (with --copies)
 
     .. container:: verbose
 
       The -t/--terse option abbreviates the output by showing only the directory
       name if all the files in it share the same status. The option takes an
       argument indicating the statuses to abbreviate: 'm' for 'modified', 'a'
       for 'added', 'r' for 'removed', 'd' for 'deleted', 'u' for 'unknown', 'i'
       for 'ignored' and 'c' for clean.
 
       It abbreviates only those statuses which are passed. Note that clean and
       ignored files are not displayed with '--terse ic' unless the -c/--clean
       and -i/--ignored options are also used.
 
       The -v/--verbose option shows information when the repository is in an
       unfinished merge, shelve, rebase state etc. You can have this behavior
       turned on by default by enabling the ``commands.status.verbose`` option.
 
       You can skip displaying some of these states by setting
       ``commands.status.skipstates`` to one or more of: 'bisect', 'graft',
       'histedit', 'merge', 'rebase', or 'unshelve'.
 
       Examples:
 
       - show changes in the working directory relative to a
         changeset::
 
           hg status --rev 9353
 
       - show changes in the working directory relative to the
         current directory (see :hg:`help patterns` for more information)::
 
           hg status re:
 
       - show all changes including copies in an existing changeset::
 
           hg status --copies --change 9353
 
       - get a NUL separated list of added files, suitable for xargs::
 
           hg status -an0
 
       - show more information about the repository status, abbreviating
         added, removed, modified, deleted, and untracked paths::
 
           hg status -v -t mardu
 
     Returns 0 on success.
 
     """
 
     opts = pycompat.byteskwargs(opts)
     revs = opts.get('rev')
     change = opts.get('change')
     terse = opts.get('terse')
 
     if revs and change:
         msg = _('cannot specify --rev and --change at the same time')
         raise error.Abort(msg)
     elif revs and terse:
         msg = _('cannot use --terse with --rev')
         raise error.Abort(msg)
     elif change:
         node2 = scmutil.revsingle(repo, change, None).node()
         node1 = repo[node2].p1().node()
     else:
         node1, node2 = scmutil.revpair(repo, revs)
 
     if pats or ui.configbool('commands', 'status.relative'):
         cwd = repo.getcwd()
     else:
         cwd = ''
 
     if opts.get('print0'):
         end = '\0'
     else:
         end = '\n'
     copy = {}
     states = 'modified added removed deleted unknown ignored clean'.split()
     show = [k for k in states if opts.get(k)]
     if opts.get('all'):
         show += ui.quiet and (states[:4] + ['clean']) or states
 
     if not show:
         if ui.quiet:
             show = states[:4]
         else:
             show = states[:5]
 
     m = scmutil.match(repo[node2], pats, opts)
     if terse:
         # we need to compute clean and unknown to terse
         stat = repo.status(node1, node2, m,
                            'ignored' in show or 'i' in terse,
                             True, True, opts.get('subrepos'))
 
         stat = cmdutil.tersedir(stat, terse)
     else:
         stat = repo.status(node1, node2, m,
                            'ignored' in show, 'clean' in show,
                            'unknown' in show, opts.get('subrepos'))
 
     changestates = zip(states, pycompat.iterbytestr('MAR!?IC'), stat)
 
     if (opts.get('all') or opts.get('copies')
         or ui.configbool('ui', 'statuscopies')) and not opts.get('no_status'):
         copy = copies.pathcopies(repo[node1], repo[node2], m)
 
     ui.pager('status')
     fm = ui.formatter('status', opts)
     fmt = '%s' + end
     showchar = not opts.get('no_status')
 
     for state, char, files in changestates:
         if state in show:
             label = 'status.' + state
             for f in files:
                 fm.startitem()
                 fm.condwrite(showchar, 'status', '%s ', char, label=label)
                 fm.write('path', fmt, repo.pathto(f, cwd), label=label)
                 if f in copy:
                     fm.write("copy", '  %s' + end, repo.pathto(copy[f], cwd),
                              label='status.copied')
 
     if ((ui.verbose or ui.configbool('commands', 'status.verbose'))
         and not ui.plain()):
         cmdutil.morestatus(repo, fm)
     fm.end()
 
 @command('^summary|sum',
     [('', 'remote', None, _('check for push and pull'))], '[--remote]')
 def summary(ui, repo, **opts):
     """summarize working directory state
 
     This generates a brief summary of the working directory state,
     including parents, branch, commit status, phase and available updates.
 
     With the --remote option, this will check the default paths for
     incoming and outgoing changes. This can be time-consuming.
 
     Returns 0 on success.
     """
 
     opts = pycompat.byteskwargs(opts)
     ui.pager('summary')
     ctx = repo[None]
     parents = ctx.parents()
     pnode = parents[0].node()
     marks = []
 
     ms = None
     try:
         ms = mergemod.mergestate.read(repo)
     except error.UnsupportedMergeRecords as e:
         s = ' '.join(e.recordtypes)
         ui.warn(
             _('warning: merge state has unsupported record types: %s\n') % s)
         unresolved = []
     else:
         unresolved = list(ms.unresolved())
 
     for p in parents:
         # label with log.changeset (instead of log.parent) since this
         # shows a working directory parent *changeset*:
         # i18n: column positioning for "hg summary"
         ui.write(_('parent: %d:%s ') % (p.rev(), p),
                  label=cmdutil._changesetlabels(p))
         ui.write(' '.join(p.tags()), label='log.tag')
         if p.bookmarks():
             marks.extend(p.bookmarks())
         if p.rev() == -1:
             if not len(repo):
                 ui.write(_(' (empty repository)'))
             else:
                 ui.write(_(' (no revision checked out)'))
         if p.obsolete():
             ui.write(_(' (obsolete)'))
         if p.isunstable():
             instabilities = (ui.label(instability, 'trouble.%s' % instability)
                              for instability in p.instabilities())
             ui.write(' ('
                      + ', '.join(instabilities)
                      + ')')
         ui.write('\n')
         if p.description():
             ui.status(' ' + p.description().splitlines()[0].strip() + '\n',
                       label='log.summary')
 
     branch = ctx.branch()
     bheads = repo.branchheads(branch)
     # i18n: column positioning for "hg summary"
     m = _('branch: %s\n') % branch
     if branch != 'default':
         ui.write(m, label='log.branch')
     else:
         ui.status(m, label='log.branch')
 
     if marks:
         active = repo._activebookmark
         # i18n: column positioning for "hg summary"
         ui.write(_('bookmarks:'), label='log.bookmark')
         if active is not None:
             if active in marks:
                 ui.write(' *' + active, label=bookmarks.activebookmarklabel)
                 marks.remove(active)
             else:
                 ui.write(' [%s]' % active, label=bookmarks.activebookmarklabel)
         for m in marks:
             ui.write(' ' + m, label='log.bookmark')
         ui.write('\n', label='log.bookmark')
 
     status = repo.status(unknown=True)
 
     c = repo.dirstate.copies()
     copied, renamed = [], []
     for d, s in c.iteritems():
         if s in status.removed:
             status.removed.remove(s)
             renamed.append(d)
         else:
             copied.append(d)
         if d in status.added:
             status.added.remove(d)
 
     subs = [s for s in ctx.substate if ctx.sub(s).dirty()]
 
     labels = [(ui.label(_('%d modified'), 'status.modified'), status.modified),
               (ui.label(_('%d added'), 'status.added'), status.added),
               (ui.label(_('%d removed'), 'status.removed'), status.removed),
               (ui.label(_('%d renamed'), 'status.copied'), renamed),
               (ui.label(_('%d copied'), 'status.copied'), copied),
               (ui.label(_('%d deleted'), 'status.deleted'), status.deleted),
               (ui.label(_('%d unknown'), 'status.unknown'), status.unknown),
               (ui.label(_('%d unresolved'), 'resolve.unresolved'), unresolved),
               (ui.label(_('%d subrepos'), 'status.modified'), subs)]
     t = []
     for l, s in labels:
         if s:
             t.append(l % len(s))
 
     t = ', '.join(t)
     cleanworkdir = False
 
     if repo.vfs.exists('graftstate'):
         t += _(' (graft in progress)')
     if repo.vfs.exists('updatestate'):
         t += _(' (interrupted update)')
     elif len(parents) > 1:
         t += _(' (merge)')
     elif branch != parents[0].branch():
         t += _(' (new branch)')
     elif (parents[0].closesbranch() and
           pnode in repo.branchheads(branch, closed=True)):
         t += _(' (head closed)')
     elif not (status.modified or status.added or status.removed or renamed or
               copied or subs):
         t += _(' (clean)')
         cleanworkdir = True
     elif pnode not in bheads:
         t += _(' (new branch head)')
 
     if parents:
         pendingphase = max(p.phase() for p in parents)
     else:
         pendingphase = phases.public
 
     if pendingphase > phases.newcommitphase(ui):
         t += ' (%s)' % phases.phasenames[pendingphase]
 
     if cleanworkdir:
         # i18n: column positioning for "hg summary"
         ui.status(_('commit: %s\n') % t.strip())
     else:
         # i18n: column positioning for "hg summary"
         ui.write(_('commit: %s\n') % t.strip())
 
     # all ancestors of branch heads - all ancestors of parent = new csets
     new = len(repo.changelog.findmissing([pctx.node() for pctx in parents],
                                          bheads))
 
     if new == 0:
         # i18n: column positioning for "hg summary"
         ui.status(_('update: (current)\n'))
     elif pnode not in bheads:
         # i18n: column positioning for "hg summary"
         ui.write(_('update: %d new changesets (update)\n') % new)
     else:
         # i18n: column positioning for "hg summary"
         ui.write(_('update: %d new changesets, %d branch heads (merge)\n') %
                  (new, len(bheads)))
 
     t = []
     draft = len(repo.revs('draft()'))
     if draft:
         t.append(_('%d draft') % draft)
     secret = len(repo.revs('secret()'))
     if secret:
         t.append(_('%d secret') % secret)
 
     if draft or secret:
         ui.status(_('phases: %s\n') % ', '.join(t))
 
     if obsolete.isenabled(repo, obsolete.createmarkersopt):
         for trouble in ("orphan", "contentdivergent", "phasedivergent"):
             numtrouble = len(repo.revs(trouble + "()"))
             # We write all the possibilities to ease translation
             troublemsg = {
                "orphan": _("orphan: %d changesets"),
                "contentdivergent": _("content-divergent: %d changesets"),
                "phasedivergent": _("phase-divergent: %d changesets"),
             }
             if numtrouble > 0:
                 ui.status(troublemsg[trouble] % numtrouble + "\n")
 
     cmdutil.summaryhooks(ui, repo)
 
     if opts.get('remote'):
         needsincoming, needsoutgoing = True, True
     else:
         needsincoming, needsoutgoing = False, False
         for i, o in cmdutil.summaryremotehooks(ui, repo, opts, None):
             if i:
                 needsincoming = True
             if o:
                 needsoutgoing = True
         if not needsincoming and not needsoutgoing:
             return
 
     def getincoming():
         source, branches = hg.parseurl(ui.expandpath('default'))
         sbranch = branches[0]
         try:
             other = hg.peer(repo, {}, source)
         except error.RepoError:
             if opts.get('remote'):
                 raise
             return source, sbranch, None, None, None
         revs, checkout = hg.addbranchrevs(repo, other, branches, None)
         if revs:
             revs = [other.lookup(rev) for rev in revs]
         ui.debug('comparing with %s\n' % util.hidepassword(source))
         repo.ui.pushbuffer()
         commoninc = discovery.findcommonincoming(repo, other, heads=revs)
         repo.ui.popbuffer()
         return source, sbranch, other, commoninc, commoninc[1]
 
     if needsincoming:
         source, sbranch, sother, commoninc, incoming = getincoming()
     else:
         source = sbranch = sother = commoninc = incoming = None
 
     def getoutgoing():
         dest, branches = hg.parseurl(ui.expandpath('default-push', 'default'))
         dbranch = branches[0]
         revs, checkout = hg.addbranchrevs(repo, repo, branches, None)
         if source != dest:
             try:
                 dother = hg.peer(repo, {}, dest)
             except error.RepoError:
                 if opts.get('remote'):
                     raise
                 return dest, dbranch, None, None
             ui.debug('comparing with %s\n' % util.hidepassword(dest))
         elif sother is None:
             # there is no explicit destination peer, but source one is invalid
             return dest, dbranch, None, None
         else:
             dother = sother
         if (source != dest or (sbranch is not None and sbranch != dbranch)):
             common = None
         else:
             common = commoninc
         if revs:
             revs = [repo.lookup(rev) for rev in revs]
         repo.ui.pushbuffer()
         outgoing = discovery.findcommonoutgoing(repo, dother, onlyheads=revs,
                                                 commoninc=common)
         repo.ui.popbuffer()
         return dest, dbranch, dother, outgoing
 
     if needsoutgoing:
         dest, dbranch, dother, outgoing = getoutgoing()
     else:
         dest = dbranch = dother = outgoing = None
 
     if opts.get('remote'):
         t = []
         if incoming:
             t.append(_('1 or more incoming'))
         o = outgoing.missing
         if o:
             t.append(_('%d outgoing') % len(o))
         other = dother or sother
         if 'bookmarks' in other.listkeys('namespaces'):
             counts = bookmarks.summary(repo, other)
             if counts[0] > 0:
                 t.append(_('%d incoming bookmarks') % counts[0])
             if counts[1] > 0:
                 t.append(_('%d outgoing bookmarks') % counts[1])
 
         if t:
             # i18n: column positioning for "hg summary"
             ui.write(_('remote: %s\n') % (', '.join(t)))
         else:
             # i18n: column positioning for "hg summary"
             ui.status(_('remote: (synced)\n'))
 
     cmdutil.summaryremotehooks(ui, repo, opts,
                                ((source, sbranch, sother, commoninc),
                                 (dest, dbranch, dother, outgoing)))
 
 @command('tag',
     [('f', 'force', None, _('force tag')),
     ('l', 'local', None, _('make the tag local')),
     ('r', 'rev', '', _('revision to tag'), _('REV')),
     ('', 'remove', None, _('remove a tag')),
     # -l/--local is already there, commitopts cannot be used
     ('e', 'edit', None, _('invoke editor on commit messages')),
     ('m', 'message', '', _('use text as commit message'), _('TEXT')),
     ] + commitopts2,
     _('[-f] [-l] [-m TEXT] [-d DATE] [-u USER] [-r REV] NAME...'))
 def tag(ui, repo, name1, *names, **opts):
     """add one or more tags for the current or given revision
 
     Name a particular revision using <name>.
 
     Tags are used to name particular revisions of the repository and are
     very useful to compare different revisions, to go back to significant
     earlier versions or to mark branch points as releases, etc. Changing
     an existing tag is normally disallowed; use -f/--force to override.
 
     If no revision is given, the parent of the working directory is
     used.
 
     To facilitate version control, distribution, and merging of tags,
     they are stored as a file named ".hgtags" which is managed similarly
     to other project files and can be hand-edited if necessary. This
     also means that tagging creates a new commit. The file
     ".hg/localtags" is used for local tags (not shared among
     repositories).
 
     Tag commits are usually made at the head of a branch. If the parent
     of the working directory is not a branch head, :hg:`tag` aborts; use
     -f/--force to force the tag commit to be based on a non-head
     changeset.
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     Since tag names have priority over branch names during revision
     lookup, using an existing branch name as a tag name is discouraged.
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     wlock = lock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         rev_ = "."
         names = [t.strip() for t in (name1,) + names]
         if len(names) != len(set(names)):
             raise error.Abort(_('tag names must be unique'))
         for n in names:
             scmutil.checknewlabel(repo, n, 'tag')
             if not n:
                 raise error.Abort(_('tag names cannot consist entirely of '
                                    'whitespace'))
         if opts.get('rev') and opts.get('remove'):
             raise error.Abort(_("--rev and --remove are incompatible"))
         if opts.get('rev'):
             rev_ = opts['rev']
         message = opts.get('message')
         if opts.get('remove'):
             if opts.get('local'):
                 expectedtype = 'local'
             else:
                 expectedtype = 'global'
 
             for n in names:
                 if not repo.tagtype(n):
                     raise error.Abort(_("tag '%s' does not exist") % n)
                 if repo.tagtype(n) != expectedtype:
                     if expectedtype == 'global':
                         raise error.Abort(_("tag '%s' is not a global tag") % n)
                     else:
                         raise error.Abort(_("tag '%s' is not a local tag") % n)
             rev_ = 'null'
             if not message:
                 # we don't translate commit messages
                 message = 'Removed tag %s' % ', '.join(names)
         elif not opts.get('force'):
             for n in names:
                 if n in repo.tags():
                     raise error.Abort(_("tag '%s' already exists "
                                        "(use -f to force)") % n)
         if not opts.get('local'):
             p1, p2 = repo.dirstate.parents()
             if p2 != nullid:
                 raise error.Abort(_('uncommitted merge'))
             bheads = repo.branchheads()
             if not opts.get('force') and bheads and p1 not in bheads:
                 raise error.Abort(_('working directory is not at a branch head '
                                     '(use -f to force)'))
         r = scmutil.revsingle(repo, rev_).node()
 
         if not message:
             # we don't translate commit messages
             message = ('Added tag %s for changeset %s' %
                        (', '.join(names), short(r)))
 
         date = opts.get('date')
         if date:
             date = util.parsedate(date)
 
         if opts.get('remove'):
             editform = 'tag.remove'
         else:
             editform = 'tag.add'
         editor = cmdutil.getcommiteditor(editform=editform,
                                          **pycompat.strkwargs(opts))
 
         # don't allow tagging the null rev
         if (not opts.get('remove') and
             scmutil.revsingle(repo, rev_).rev() == nullrev):
             raise error.Abort(_("cannot tag null revision"))
 
         tagsmod.tag(repo, names, r, message, opts.get('local'),
                     opts.get('user'), date, editor=editor)
     finally:
         release(lock, wlock)
 
 @command('tags', formatteropts, '')
 def tags(ui, repo, **opts):
     """list repository tags
 
     This lists both regular and local tags. When the -v/--verbose
     switch is used, a third column "local" is printed for local tags.
     When the -q/--quiet switch is used, only the tag name is printed.
 
     Returns 0 on success.
     """
 
     opts = pycompat.byteskwargs(opts)
     ui.pager('tags')
     fm = ui.formatter('tags', opts)
     hexfunc = fm.hexfunc
     tagtype = ""
 
     for t, n in reversed(repo.tagslist()):
         hn = hexfunc(n)
         label = 'tags.normal'
         tagtype = ''
         if repo.tagtype(t) == 'local':
             label = 'tags.local'
             tagtype = 'local'
 
         fm.startitem()
         fm.write('tag', '%s', t, label=label)
         fmt = " " * (30 - encoding.colwidth(t)) + ' %5d:%s'
         fm.condwrite(not ui.quiet, 'rev node', fmt,
                      repo.changelog.rev(n), hn, label=label)
         fm.condwrite(ui.verbose and tagtype, 'type', ' %s',
                      tagtype, label=label)
         fm.plain('\n')
     fm.end()
 
 @command('tip',
     [('p', 'patch', None, _('show patch')),
     ('g', 'git', None, _('use git extended diff format')),
     ] + templateopts,
     _('[-p] [-g]'))
 def tip(ui, repo, **opts):
     """show the tip revision (DEPRECATED)
 
     The tip revision (usually just called the tip) is the changeset
     most recently added to the repository (and therefore the most
     recently changed head).
 
     If you have just made a commit, that commit will be the tip. If
     you have just pulled changes from another repository, the tip of
     that repository becomes the current tip. The "tip" tag is special
     and cannot be renamed or assigned to a different changeset.
 
     This command is deprecated, please use :hg:`heads` instead.
 
     Returns 0 on success.
     """
     opts = pycompat.byteskwargs(opts)
     displayer = cmdutil.show_changeset(ui, repo, opts)
     displayer.show(repo['tip'])
     displayer.close()
 
 @command('unbundle',
     [('u', 'update', None,
      _('update to new branch head if changesets were unbundled'))],
     _('[-u] FILE...'))
 def unbundle(ui, repo, fname1, *fnames, **opts):
     """apply one or more bundle files
 
     Apply one or more bundle files generated by :hg:`bundle`.
 
     Returns 0 on success, 1 if an update has unresolved files.
     """
     fnames = (fname1,) + fnames
 
     with repo.lock():
         for fname in fnames:
             f = hg.openpath(ui, fname)
             gen = exchange.readbundle(ui, f, fname)
             if isinstance(gen, streamclone.streamcloneapplier):
                 raise error.Abort(
                         _('packed bundles cannot be applied with '
                           '"hg unbundle"'),
                         hint=_('use "hg debugapplystreamclonebundle"'))
             url = 'bundle:' + fname
             try:
                 txnname = 'unbundle'
                 if not isinstance(gen, bundle2.unbundle20):
                     txnname = 'unbundle\n%s' % util.hidepassword(url)
                 with repo.transaction(txnname) as tr:
                     op = bundle2.applybundle(repo, gen, tr, source='unbundle',
                                              url=url)
             except error.BundleUnknownFeatureError as exc:
                 raise error.Abort(
                     _('%s: unknown bundle feature, %s') % (fname, exc),
                     hint=_("see https://mercurial-scm.org/"
                            "wiki/BundleFeature for more "
                            "information"))
             modheads = bundle2.combinechangegroupresults(op)
 
     return postincoming(ui, repo, modheads, opts.get(r'update'), None, None)
 
 @command('^update|up|checkout|co',
     [('C', 'clean', None, _('discard uncommitted changes (no backup)')),
     ('c', 'check', None, _('require clean working directory')),
     ('m', 'merge', None, _('merge uncommitted changes')),
     ('d', 'date', '', _('tipmost revision matching date'), _('DATE')),
     ('r', 'rev', '', _('revision'), _('REV'))
      ] + mergetoolopts,
     _('[-C|-c|-m] [-d DATE] [[-r] REV]'))
 def update(ui, repo, node=None, rev=None, clean=False, date=None, check=False,
            merge=None, tool=None):
     """update working directory (or switch revisions)
 
     Update the repository's working directory to the specified
     changeset. If no changeset is specified, update to the tip of the
     current named branch and move the active bookmark (see :hg:`help
     bookmarks`).
 
     Update sets the working directory's parent revision to the specified
     changeset (see :hg:`help parents`).
 
     If the changeset is not a descendant or ancestor of the working
     directory's parent and there are uncommitted changes, the update is
     aborted. With the -c/--check option, the working directory is checked
     for uncommitted changes; if none are found, the working directory is
     updated to the specified changeset.
 
     .. container:: verbose
 
       The -C/--clean, -c/--check, and -m/--merge options control what
       happens if the working directory contains uncommitted changes.
       At most of one of them can be specified.
 
       1. If no option is specified, and if
          the requested changeset is an ancestor or descendant of
          the working directory's parent, the uncommitted changes
          are merged into the requested changeset and the merged
          result is left uncommitted. If the requested changeset is
          not an ancestor or descendant (that is, it is on another
          branch), the update is aborted and the uncommitted changes
          are preserved.
 
       2. With the -m/--merge option, the update is allowed even if the
          requested changeset is not an ancestor or descendant of
          the working directory's parent.
 
       3. With the -c/--check option, the update is aborted and the
          uncommitted changes are preserved.
 
       4. With the -C/--clean option, uncommitted changes are discarded and
          the working directory is updated to the requested changeset.
 
     To cancel an uncommitted merge (and lose your changes), use
     :hg:`update --clean .`.
 
     Use null as the changeset to remove the working directory (like
     :hg:`clone -U`).
 
     If you want to revert just one file to an older revision, use
     :hg:`revert [-r REV] NAME`.
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     Returns 0 on success, 1 if there are unresolved files.
     """
     if rev and node:
         raise error.Abort(_("please specify just one revision"))
 
     if ui.configbool('commands', 'update.requiredest'):
         if not node and not rev and not date:
             raise error.Abort(_('you must specify a destination'),
                               hint=_('for example: hg update ".::"'))
 
     if rev is None or rev == '':
         rev = node
 
     if date and rev is not None:
         raise error.Abort(_("you can't specify a revision and a date"))
 
     if len([x for x in (clean, check, merge) if x]) > 1:
         raise error.Abort(_("can only specify one of -C/--clean, -c/--check, "
                             "or -m/--merge"))
 
     updatecheck = None
     if check:
         updatecheck = 'abort'
     elif merge:
         updatecheck = 'none'
 
     with repo.wlock():
         cmdutil.clearunfinished(repo)
 
         if date:
             rev = cmdutil.finddate(ui, repo, date)
 
         # if we defined a bookmark, we have to remember the original name
         brev = rev
         rev = scmutil.revsingle(repo, rev, rev).rev()
 
         repo.ui.setconfig('ui', 'forcemerge', tool, 'update')
 
         return hg.updatetotally(ui, repo, rev, brev, clean=clean,
                                 updatecheck=updatecheck)
 
 @command('verify', [])
 def verify(ui, repo):
     """verify the integrity of the repository
 
     Verify the integrity of the current repository.
 
     This will perform an extensive check of the repository's
     integrity, validating the hashes and checksums of each entry in
     the changelog, manifest, and tracked files, as well as the
     integrity of their crosslinks and indices.
 
     Please see https://mercurial-scm.org/wiki/RepositoryCorruption
     for more information about recovery from corruption of the
     repository.
 
     Returns 0 on success, 1 if errors are encountered.
     """
     return hg.verify(repo)
 
 @command('version', [] + formatteropts, norepo=True)
 def version_(ui, **opts):
     """output version and copyright information"""
     opts = pycompat.byteskwargs(opts)
     if ui.verbose:
         ui.pager('version')
     fm = ui.formatter("version", opts)
     fm.startitem()
     fm.write("ver", _("Mercurial Distributed SCM (version %s)\n"),
              util.version())
     license = _(
         "(see https://mercurial-scm.org for more information)\n"
         "\nCopyright (C) 2005-2017 Matt Mackall and others\n"
         "This is free software; see the source for copying conditions. "
         "There is NO\nwarranty; "
         "not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
     )
     if not ui.quiet:
         fm.plain(license)
 
     if ui.verbose:
         fm.plain(_("\nEnabled extensions:\n\n"))
     # format names and versions into columns
     names = []
     vers = []
     isinternals = []
     for name, module in extensions.extensions():
         names.append(name)
         vers.append(extensions.moduleversion(module) or None)
         isinternals.append(extensions.ismoduleinternal(module))
     fn = fm.nested("extensions")
     if names:
         namefmt = "  %%-%ds  " % max(len(n) for n in names)
         places = [_("external"), _("internal")]
         for n, v, p in zip(names, vers, isinternals):
             fn.startitem()
             fn.condwrite(ui.verbose, "name", namefmt, n)
             if ui.verbose:
                 fn.plain("%s  " % places[p])
             fn.data(bundled=p)
             fn.condwrite(ui.verbose and v, "ver", "%s", v)
             if ui.verbose:
                 fn.plain("\n")
     fn.end()
     fm.end()
 
 def loadcmdtable(ui, name, cmdtable):
     """Load command functions from specified cmdtable
     """
     overrides = [cmd for cmd in cmdtable if cmd in table]
     if overrides:
         ui.warn(_("extension '%s' overrides commands: %s\n")
                 % (name, " ".join(overrides)))
     table.update(cmdtable)

mercurial/help/internals/config.txt

@@ -1,108 +1,108 b''
 All config options used within Mercurial should be registered.
 
 Config Option in Core
 =====================
 
 Config options used by Mercurial core are registered in the
 ``mercurial.configitems`` module.
 
 Simple entry
 ------------
 
 A registration entry typically looks like::
 
     coreconfigitem('section', 'option',
         default=MyDefaultValue,
     )
 
 Once registered, Mercurial will know that ``section.option`` is a legitimate
 config option and that ``MyDefaultValue`` should be used if no other values are
 defined in configuration files.
 
 Complex default value
 ---------------------
 
 If the default provided is a callable, it is called to retrieve the default
-value when accessing the config option. This is useful for default value that
+value when accessing the config option. This is useful for default values that
 are mutable like the empty list::
 
     coreconfigitem('pager', 'ignore',
         default=list,
     )
 
 In addition, there are cases where the default is not fixed, but computed from
-other properties. In this case, use the ``dynamicdefault`` object as value for
-the ``default`` parameters. A default value is then explicitly required when
+other properties. In this case, use the ``dynamicdefault`` object as the value
+for the ``default`` parameter. A default value is then explicitly required when
 reading the option::
 
     # registration
     coreconfigitem('web', 'name',
         default=dynamicdefault,
     )
 
     # usage
-    ui.config('web', 'name', dirnam)
+    ui.config('web', 'name', dirname)
 
 Free form options
 -----------------
 
 Some config sections use free form options (e.g. ``paths``). You can register
 them using the ``generic`` parameters::
 
     coreconfigitem('paths', '.*',
         default=None,
         generic=True,
     )
 
 When ``generic=True`` is set, the option name is matched as a regular expression
 (rooted to string start). It can be used to select specific sub parameters::
 
     coreconfigitem('merge-tools', br'.*\.args$',
         default="$local $base $other",
         generic=True,
         priority=-1,
     )
 
-The ``priority`` parameter control the order used to match the generic pattern
+The ``priority`` parameter controls the order used to match the generic pattern
 (lower first).
 
 Config Option in Extensions
 ===========================
 
 General case
 ------------
 
 Extensions should register config items through the ``registrar`` API (also used
 for commands and others)::
 
     configtable = {}
     configitem = registrar.configitem(configtable)
 
     configitem('blackbox', 'dirty',
         default=False,
     )
 
 The ``dynamicdefault`` object is then available as
 ``configitem.dynamicdefault``.
 
-Supporting older version
-------------------------
+Supporting older versions
+-------------------------
 
-The register was introduced in Mercurial 4.3, the ``generic`` parameter was
+The registry was introduced in Mercurial 4.3, and the ``generic`` parameter was
 introduced in 4.4. Starting with Mercurial 4.4, all core options were registered
 and developer warnings are emitted when accessing unregistered option.
 
-Extensions supporting version older than Mercurial-4.3 cannot rely on the
-default value registered. The simplest way to register option while still
-supporting older version is to use ``dynamicdefault`` for option requiring a
-default value. The existing code passing an explicit default can then stay in
-use until compatibility to Mercurial 4.2 is dropped.
+Extensions supporting versions older than Mercurial 4.3 cannot rely on the
+default value being registered. The simplest way to register an option while
+still supporting an older version is to use ``dynamicdefault`` for options
+requiring a default value. The existing code passing an explicit default can
+then stay in use until compatibility with Mercurial 4.2 is dropped.
 
-As reminder here are the default value for each config types:
+As reminder, here are the default values for each config type:
 - config:      None
 - configbool:  False
 - configbytes: 0
 - configdate:  None
 - configint:   None
 - configlist:  []
-- configpath: None
+- configpath:  None

mercurial/help/merge-tools.txt

@@ -1,85 +1,85 b''
 To merge files Mercurial uses merge tools.
 
 A merge tool combines two different versions of a file into a merged
 file. Merge tools are given the two files and the greatest common
 ancestor of the two file versions, so they can determine the changes
 made on both branches.
 
 Merge tools are used both for :hg:`resolve`, :hg:`merge`, :hg:`update`,
 :hg:`backout` and in several extensions.
 
 Usually, the merge tool tries to automatically reconcile the files by
 combining all non-overlapping changes that occurred separately in
 the two different evolutions of the same initial base file. Furthermore, some
 interactive merge programs make it easier to manually resolve
 conflicting merges, either in a graphical way, or by inserting some
 conflict markers. Mercurial does not include any interactive merge
 programs but relies on external tools for that.
 
 Available merge tools
 =====================
 
 External merge tools and their properties are configured in the
 merge-tools configuration section - see hgrc(5) - but they can often just
 be named by their executable.
 
 A merge tool is generally usable if its executable can be found on the
 system and if it can handle the merge. The executable is found if it
 is an absolute or relative executable path or the name of an
 application in the executable search path. The tool is assumed to be
 able to handle the merge if it can handle symlinks if the file is a
 symlink, if it can handle binary files if the file is binary, and if a
 GUI is available if the tool requires a GUI.
 
 There are some internal merge tools which can be used. The internal
 merge tools are:
 
 .. internaltoolsmarker
 
 Internal tools are always available and do not require a GUI but will by default
 not handle symlinks or binary files.
 
 Choosing a merge tool
 =====================
 
 Mercurial uses these rules when deciding which merge tool to use:
 
 1. If a tool has been specified with the --tool option to merge or resolve, it
    is used.  If it is the name of a tool in the merge-tools configuration, its
    configuration is used. Otherwise the specified tool must be executable by
    the shell.
 
 2. If the ``HGMERGE`` environment variable is present, its value is used and
    must be executable by the shell.
 
 3. If the filename of the file to be merged matches any of the patterns in the
    merge-patterns configuration section, the first usable merge tool
    corresponding to a matching pattern is used. Here, binary capabilities of the
    merge tool are not considered.
 
 4. If ui.merge is set it will be considered next. If the value is not the name
    of a configured tool, the specified value is used and must be executable by
    the shell. Otherwise the named tool is used if it is usable.
 
 5. If any usable merge tools are present in the merge-tools configuration
    section, the one with the highest priority is used.
 
 6. If a program named ``hgmerge`` can be found on the system, it is used - but
    it will by default not be used for symlinks and binary files.
 
 7. If the file to be merged is not binary and is not a symlink, then
    internal ``:merge`` is used.
 
 8. Otherwise, ``:prompt`` is used.
 
 .. note::
 
    After selecting a merge program, Mercurial will by default attempt
    to merge the files using a simple merge algorithm first. Only if it doesn't
-   succeed because of conflicting changes Mercurial will actually execute the
+   succeed because of conflicting changes will Mercurial actually execute the
    merge program. Whether to use the simple merge algorithm first can be
    controlled by the premerge setting of the merge tool. Premerge is enabled by
    default unless the file is binary or a symlink.
 
 See the merge-tools and ui sections of hgrc(5) for details on the
 configuration of merge tools.

mercurial/help/phases.txt

@@ -1,100 +1,100 b''
 What are phases?
 ================
 
 Phases are a system for tracking which changesets have been or should
 be shared. This helps prevent common mistakes when modifying history
 (for instance, with the mq or rebase extensions).
 
 Each changeset in a repository is in one of the following phases:
 
  - public : changeset is visible on a public server
  - draft : changeset is not yet published
  - secret : changeset should not be pushed, pulled, or cloned
 
 These phases are ordered (public < draft < secret) and no changeset
 can be in a lower phase than its ancestors. For instance, if a
 changeset is public, all its ancestors are also public. Lastly,
 changeset phases should only be changed towards the public phase.
 
 How are phases managed?
 =======================
 
 For the most part, phases should work transparently. By default, a
 changeset is created in the draft phase and is moved into the public
 phase when it is pushed to another repository.
 
 Once changesets become public, extensions like mq and rebase will
 refuse to operate on them to prevent creating duplicate changesets.
 Phases can also be manually manipulated with the :hg:`phase` command
 if needed. See :hg:`help -v phase` for examples.
 
-To make yours commits secret by default, put this in your
+To make your commits secret by default, put this in your
 configuration file::
 
   [phases]
   new-commit = secret
 
 Phases and servers
 ==================
 
 Normally, all servers are ``publishing`` by default. This means::
 
  - all draft changesets that are pulled or cloned appear in phase
  public on the client
 
  - all draft changesets that are pushed appear as public on both
  client and server
 
  - secret changesets are neither pushed, pulled, or cloned
 
 .. note::
 
   Pulling a draft changeset from a publishing server does not mark it
   as public on the server side due to the read-only nature of pull.
 
 Sometimes it may be desirable to push and pull changesets in the draft
 phase to share unfinished work. This can be done by setting a
 repository to disable publishing in its configuration file::
 
   [phases]
   publish = False
 
 See :hg:`help config` for more information on configuration files.
 
 .. note::
 
   Servers running older versions of Mercurial are treated as
   publishing.
 
 .. note::
 
    Changesets in secret phase are not exchanged with the server. This
    applies to their content: file names, file contents, and changeset
    metadata. For technical reasons, the identifier (e.g. d825e4025e39)
    of the secret changeset may be communicated to the server.
 
 
 Examples
 ========
 
  - list changesets in draft or secret phase::
 
      hg log -r "not public()"
 
  - change all secret changesets to draft::
 
      hg phase --draft "secret()"
 
  - forcibly move the current changeset and descendants from public to draft::
 
      hg phase --force --draft .
 
- - show a list of changeset revision and phase::
+ - show a list of changeset revisions and each corresponding phase::
 
      hg log --template "{rev} {phase}\n"
 
  - resynchronize draft changesets relative to a remote repository::
 
      hg phase -fd "outgoing(URL)"
 
 See :hg:`help phase` for more information on manually manipulating phases.

mercurial/help/revisions.txt

@@ -1,223 +1,223 b''
 Mercurial supports several ways to specify revisions.
 
 Specifying single revisions
 ===========================
 
 A plain integer is treated as a revision number. Negative integers are
 treated as sequential offsets from the tip, with -1 denoting the tip,
 -2 denoting the revision prior to the tip, and so forth.
 
 A 40-digit hexadecimal string is treated as a unique revision identifier.
 A hexadecimal string less than 40 characters long is treated as a
 unique revision identifier and is referred to as a short-form
 identifier. A short-form identifier is only valid if it is the prefix
 of exactly one full-length identifier.
 
 Any other string is treated as a bookmark, tag, or branch name. A
 bookmark is a movable pointer to a revision. A tag is a permanent name
 associated with a revision. A branch name denotes the tipmost open branch head
 of that branch - or if they are all closed, the tipmost closed head of the
 branch. Bookmark, tag, and branch names must not contain the ":" character.
 
 The reserved name "tip" always identifies the most recent revision.
 
 The reserved name "null" indicates the null revision. This is the
 revision of an empty repository, and the parent of revision 0.
 
 The reserved name "." indicates the working directory parent. If no
 working directory is checked out, it is equivalent to null. If an
 uncommitted merge is in progress, "." is the revision of the first
 parent.
 
 Finally, commands that expect a single revision (like ``hg update``) also
 accept revsets (see below for details). When given a revset, they use the
 last revision of the revset. A few commands accept two single revisions
 (like ``hg diff``). When given a revset, they use the first and the last
 revisions of the revset.
 
 Specifying multiple revisions
 =============================
 
 Mercurial supports a functional language for selecting a set of
 revisions. Expressions in this language are called revsets.
 
 The language supports a number of predicates which are joined by infix
 operators. Parenthesis can be used for grouping.
 
 Identifiers such as branch names may need quoting with single or
 double quotes if they contain characters like ``-`` or if they match
 one of the predefined predicates.
 
 Special characters can be used in quoted identifiers by escaping them,
 e.g., ``\n`` is interpreted as a newline. To prevent them from being
 interpreted, strings can be prefixed with ``r``, e.g. ``r'...'``.
 
 Operators
 =========
 
 There is a single prefix operator:
 
 ``not x``
   Changesets not in x. Short form is ``! x``.
 
 These are the supported infix operators:
 
 ``x::y``
   A DAG range, meaning all changesets that are descendants of x and
   ancestors of y, including x and y themselves. If the first endpoint
   is left out, this is equivalent to ``ancestors(y)``, if the second
   is left out it is equivalent to ``descendants(x)``.
 
   An alternative syntax is ``x..y``.
 
 ``x:y``
   All changesets with revision numbers between x and y, both
   inclusive. Either endpoint can be left out, they default to 0 and
   tip.
 
 ``x and y``
   The intersection of changesets in x and y. Short form is ``x & y``.
 
 ``x or y``
   The union of changesets in x and y. There are two alternative short
   forms: ``x | y`` and ``x + y``.
 
 ``x - y``
   Changesets in x but not in y.
 
 ``x % y``
   Changesets that are ancestors of x but not ancestors of y (i.e. ::x - ::y).
   This is shorthand notation for ``only(x, y)`` (see below). The second
   argument is optional and, if left out, is equivalent to ``only(x)``.
 
 ``x^n``
   The nth parent of x, n == 0, 1, or 2.
   For n == 0, x; for n == 1, the first parent of each changeset in x;
   for n == 2, the second parent of changeset in x.
 
 ``x~n``
   The nth first ancestor of x; ``x~0`` is x; ``x~3`` is ``x^^^``.
   For n < 0, the nth unambiguous descendent of x.
 
 ``x ## y``
   Concatenate strings and identifiers into one string.
 
   All other prefix, infix and postfix operators have lower priority than
   ``##``. For example, ``a1 ## a2~2`` is equivalent to ``(a1 ## a2)~2``.
 
   For example::
 
     [revsetalias]
     issue(a1) = grep(r'\bissue[ :]?' ## a1 ## r'\b|\bbug\(' ## a1 ## r'\)')
 
   ``issue(1234)`` is equivalent to
   ``grep(r'\bissue[ :]?1234\b|\bbug\(1234\)')``
   in this case. This matches against all of "issue 1234", "issue:1234",
   "issue1234" and "bug(1234)".
 
 There is a single postfix operator:
 
 ``x^``
   Equivalent to ``x^1``, the first parent of each changeset in x.
 
 Patterns
 ========
 
 Where noted, predicates that perform string matching can accept a pattern
 string. The pattern may be either a literal, or a regular expression. If the
 pattern starts with ``re:``, the remainder of the pattern is treated as a
 regular expression. Otherwise, it is treated as a literal. To match a pattern
 that actually starts with ``re:``, use the prefix ``literal:``.
 
 Matching is case-sensitive, unless otherwise noted.  To perform a case-
 insensitive match on a case-sensitive predicate, use a regular expression,
 prefixed with ``(?i)``.
 
 For example, ``tag(r're:(?i)release')`` matches "release" or "RELEASE"
-or "Release", etc
+or "Release", etc.
 
 Predicates
 ==========
 
 The following predicates are supported:
 
 .. predicatesmarker
 
 Aliases
 =======
 
 New predicates (known as "aliases") can be defined, using any combination of
 existing predicates or other aliases. An alias definition looks like::
 
   <alias> = <definition>
 
 in the ``revsetalias`` section of a Mercurial configuration file. Arguments
 of the form `a1`, `a2`, etc. are substituted from the alias into the
 definition.
 
 For example,
 
 ::
 
   [revsetalias]
   h = heads()
   d(s) = sort(s, date)
   rs(s, k) = reverse(sort(s, k))
 
 defines three aliases, ``h``, ``d``, and ``rs``. ``rs(0:tip, author)`` is
 exactly equivalent to ``reverse(sort(0:tip, author))``.
 
 Equivalents
 ===========
 
 Command line equivalents for :hg:`log`::
 
   -f    ->  ::.
   -d x  ->  date(x)
   -k x  ->  keyword(x)
   -m    ->  merge()
   -u x  ->  user(x)
   -b x  ->  branch(x)
   -P x  ->  !::x
   -l x  ->  limit(expr, x)
 
 Examples
 ========
 
 Some sample queries:
 
 - Changesets on the default branch::
 
     hg log -r "branch(default)"
 
 - Changesets on the default branch since tag 1.5 (excluding merges)::
 
     hg log -r "branch(default) and 1.5:: and not merge()"
 
 - Open branch heads::
 
     hg log -r "head() and not closed()"
 
 - Changesets between tags 1.3 and 1.5 mentioning "bug" that affect
   ``hgext/*``::
 
     hg log -r "1.3::1.5 and keyword(bug) and file('hgext/*')"
 
 - Changesets committed in May 2008, sorted by user::
 
     hg log -r "sort(date('May 2008'), user)"
 
 - Changesets mentioning "bug" or "issue" that are not in a tagged
   release::
 
     hg log -r "(keyword(bug) or keyword(issue)) and not ancestors(tag())"
 
-- Update to commit that bookmark @ is pointing too, without activating the
+- Update to the commit that bookmark @ is pointing to, without activating the
   bookmark (this works because the last revision of the revset is used)::
 
     hg update :@
 
 - Show diff between tags 1.3 and 1.5 (this works because the first and the
   last revisions of the revset are used)::
 
     hg diff -r 1.3::1.5

tests/test-extension.t

@@ -1,1714 +1,1714 b''
 Test basic extension support
 
   $ cat > foobar.py <<EOF
   > import os
   > from mercurial import commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > configtable = {}
   > configitem = registrar.configitem(configtable)
   > configitem('tests', 'foo', default="Foo")
   > def uisetup(ui):
   >     ui.write("uisetup called\\n")
   >     ui.flush()
   > def reposetup(ui, repo):
   >     ui.write("reposetup called for %s\\n" % os.path.basename(repo.root))
   >     ui.write("ui %s= repo.ui\\n" % (ui == repo.ui and "=" or "!"))
   >     ui.flush()
   > @command(b'foo', [], 'hg foo')
   > def foo(ui, *args, **kwargs):
   >     foo = ui.config('tests', 'foo')
   >     ui.write(foo)
   >     ui.write("\\n")
   > @command(b'bar', [], 'hg bar', norepo=True)
   > def bar(ui, *args, **kwargs):
   >     ui.write("Bar\\n")
   > EOF
   $ abspath=`pwd`/foobar.py
 
   $ mkdir barfoo
   $ cp foobar.py barfoo/__init__.py
   $ barfoopath=`pwd`/barfoo
 
   $ hg init a
   $ cd a
   $ echo foo > file
   $ hg add file
   $ hg commit -m 'add file'
 
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "foobar = $abspath" >> $HGRCPATH
   $ hg foo
   uisetup called
   reposetup called for a
   ui == repo.ui
   reposetup called for a (chg !)
   ui == repo.ui (chg !)
   Foo
 
   $ cd ..
   $ hg clone a b
   uisetup called (no-chg !)
   reposetup called for a
   ui == repo.ui
   reposetup called for b
   ui == repo.ui
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg bar
   uisetup called (no-chg !)
   Bar
   $ echo 'foobar = !' >> $HGRCPATH
 
 module/__init__.py-style
 
   $ echo "barfoo = $barfoopath" >> $HGRCPATH
   $ cd a
   $ hg foo
   uisetup called
   reposetup called for a
   ui == repo.ui
   reposetup called for a (chg !)
   ui == repo.ui (chg !)
   Foo
   $ echo 'barfoo = !' >> $HGRCPATH
 
 Check that extensions are loaded in phases:
 
   $ cat > foo.py <<EOF
   > import os
   > name = os.path.basename(__file__).rsplit('.', 1)[0]
   > print("1) %s imported" % name)
   > def uisetup(ui):
   >     print("2) %s uisetup" % name)
   > def extsetup():
   >     print("3) %s extsetup" % name)
   > def reposetup(ui, repo):
   >    print("4) %s reposetup" % name)
   > 
   > # custom predicate to check registration of functions at loading
   > from mercurial import (
   >     registrar,
   >     smartset,
   > )
   > revsetpredicate = registrar.revsetpredicate()
   > @revsetpredicate(name, safe=True) # safe=True for query via hgweb
   > def custompredicate(repo, subset, x):
   >     return smartset.baseset([r for r in subset if r in {0}])
   > EOF
 
   $ cp foo.py bar.py
   $ echo 'foo = foo.py' >> $HGRCPATH
   $ echo 'bar = bar.py' >> $HGRCPATH
 
 Check normal command's load order of extensions and registration of functions
 
   $ hg log -r "foo() and bar()" -q
   1) foo imported
   1) bar imported
   2) foo uisetup
   2) bar uisetup
   3) foo extsetup
   3) bar extsetup
   4) foo reposetup
   4) bar reposetup
   0:c24b9ac61126
 
 Check hgweb's load order of extensions and registration of functions
 
   $ cat > hgweb.cgi <<EOF
   > #!$PYTHON
   > from mercurial import demandimport; demandimport.enable()
   > from mercurial.hgweb import hgweb
   > from mercurial.hgweb import wsgicgi
   > application = hgweb('.', 'test repo')
   > wsgicgi.launch(application)
   > EOF
   $ . "$TESTDIR/cgienv"
 
   $ PATH_INFO='/' SCRIPT_NAME='' $PYTHON hgweb.cgi \
   >    | grep '^[0-9]) ' # ignores HTML output
   1) foo imported
   1) bar imported
   2) foo uisetup
   2) bar uisetup
   3) foo extsetup
   3) bar extsetup
   4) foo reposetup
   4) bar reposetup
 
 (check that revset predicate foo() and bar() are available)
 
 #if msys
   $ PATH_INFO='//shortlog'
 #else
   $ PATH_INFO='/shortlog'
 #endif
   $ export PATH_INFO
   $ SCRIPT_NAME='' QUERY_STRING='rev=foo() and bar()' $PYTHON hgweb.cgi \
   >     | grep '<a href="/rev/[0-9a-z]*">'
      <a href="/rev/c24b9ac61126">add file</a>
 
   $ echo 'foo = !' >> $HGRCPATH
   $ echo 'bar = !' >> $HGRCPATH
 
 Check "from __future__ import absolute_import" support for external libraries
 
 #if windows
   $ PATHSEP=";"
 #else
   $ PATHSEP=":"
 #endif
   $ export PATHSEP
 
   $ mkdir $TESTTMP/libroot
   $ echo "s = 'libroot/ambig.py'" > $TESTTMP/libroot/ambig.py
   $ mkdir $TESTTMP/libroot/mod
   $ touch $TESTTMP/libroot/mod/__init__.py
   $ echo "s = 'libroot/mod/ambig.py'" > $TESTTMP/libroot/mod/ambig.py
 
   $ cat > $TESTTMP/libroot/mod/ambigabs.py <<EOF
   > from __future__ import absolute_import
   > import ambig # should load "libroot/ambig.py"
   > s = ambig.s
   > EOF
   $ cat > loadabs.py <<EOF
   > import mod.ambigabs as ambigabs
   > def extsetup():
   >     print('ambigabs.s=%s' % ambigabs.s)
   > EOF
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}/libroot; hg --config extensions.loadabs=loadabs.py root)
   ambigabs.s=libroot/ambig.py
   $TESTTMP/a (glob)
 
 #if no-py3k
   $ cat > $TESTTMP/libroot/mod/ambigrel.py <<EOF
   > import ambig # should load "libroot/mod/ambig.py"
   > s = ambig.s
   > EOF
   $ cat > loadrel.py <<EOF
   > import mod.ambigrel as ambigrel
   > def extsetup():
   >     print('ambigrel.s=%s' % ambigrel.s)
   > EOF
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}/libroot; hg --config extensions.loadrel=loadrel.py root)
   ambigrel.s=libroot/mod/ambig.py
   $TESTTMP/a (glob)
 #endif
 
 Check absolute/relative import of extension specific modules
 
   $ mkdir $TESTTMP/extroot
   $ cat > $TESTTMP/extroot/bar.py <<EOF
   > s = 'this is extroot.bar'
   > EOF
   $ mkdir $TESTTMP/extroot/sub1
   $ cat > $TESTTMP/extroot/sub1/__init__.py <<EOF
   > s = 'this is extroot.sub1.__init__'
   > EOF
   $ cat > $TESTTMP/extroot/sub1/baz.py <<EOF
   > s = 'this is extroot.sub1.baz'
   > EOF
   $ cat > $TESTTMP/extroot/__init__.py <<EOF
   > s = 'this is extroot.__init__'
   > import foo
   > def extsetup(ui):
   >     ui.write('(extroot) ', foo.func(), '\n')
   >     ui.flush()
   > EOF
 
   $ cat > $TESTTMP/extroot/foo.py <<EOF
   > # test absolute import
   > buf = []
   > def func():
   >     # "not locals" case
   >     import extroot.bar
   >     buf.append('import extroot.bar in func(): %s' % extroot.bar.s)
   >     return '\n(extroot) '.join(buf)
   > # "fromlist == ('*',)" case
   > from extroot.bar import *
   > buf.append('from extroot.bar import *: %s' % s)
   > # "not fromlist" and "if '.' in name" case
   > import extroot.sub1.baz
   > buf.append('import extroot.sub1.baz: %s' % extroot.sub1.baz.s)
   > # "not fromlist" and NOT "if '.' in name" case
   > import extroot
   > buf.append('import extroot: %s' % extroot.s)
   > # NOT "not fromlist" and NOT "level != -1" case
   > from extroot.bar import s
   > buf.append('from extroot.bar import s: %s' % s)
   > EOF
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.extroot=$TESTTMP/extroot root)
   (extroot) from extroot.bar import *: this is extroot.bar
   (extroot) import extroot.sub1.baz: this is extroot.sub1.baz
   (extroot) import extroot: this is extroot.__init__
   (extroot) from extroot.bar import s: this is extroot.bar
   (extroot) import extroot.bar in func(): this is extroot.bar
   $TESTTMP/a (glob)
 
 #if no-py3k
   $ rm "$TESTTMP"/extroot/foo.*
   $ rm -Rf "$TESTTMP/extroot/__pycache__"
   $ cat > $TESTTMP/extroot/foo.py <<EOF
   > # test relative import
   > buf = []
   > def func():
   >     # "not locals" case
   >     import bar
   >     buf.append('import bar in func(): %s' % bar.s)
   >     return '\n(extroot) '.join(buf)
   > # "fromlist == ('*',)" case
   > from bar import *
   > buf.append('from bar import *: %s' % s)
   > # "not fromlist" and "if '.' in name" case
   > import sub1.baz
   > buf.append('import sub1.baz: %s' % sub1.baz.s)
   > # "not fromlist" and NOT "if '.' in name" case
   > import sub1
   > buf.append('import sub1: %s' % sub1.s)
   > # NOT "not fromlist" and NOT "level != -1" case
   > from bar import s
   > buf.append('from bar import s: %s' % s)
   > EOF
   $ hg --config extensions.extroot=$TESTTMP/extroot root
   (extroot) from bar import *: this is extroot.bar
   (extroot) import sub1.baz: this is extroot.sub1.baz
   (extroot) import sub1: this is extroot.sub1.__init__
   (extroot) from bar import s: this is extroot.bar
   (extroot) import bar in func(): this is extroot.bar
   $TESTTMP/a (glob)
 #endif
 
 #if demandimport
 
 Examine whether module loading is delayed until actual referring, even
 though module is imported with "absolute_import" feature.
 
 Files below in each packages are used for described purpose:
 
 - "called": examine whether "from MODULE import ATTR" works correctly
 - "unused": examine whether loading is delayed correctly
 - "used":   examine whether "from PACKAGE import MODULE" works correctly
 
 Package hierarchy is needed to examine whether demand importing works
 as expected for "from SUB.PACK.AGE import MODULE".
 
 Setup "external library" to be imported with "absolute_import"
 feature.
 
   $ mkdir -p $TESTTMP/extlibroot/lsub1/lsub2
   $ touch $TESTTMP/extlibroot/__init__.py
   $ touch $TESTTMP/extlibroot/lsub1/__init__.py
   $ touch $TESTTMP/extlibroot/lsub1/lsub2/__init__.py
 
   $ cat > $TESTTMP/extlibroot/lsub1/lsub2/called.py <<EOF
   > def func():
   >     return "this is extlibroot.lsub1.lsub2.called.func()"
   > EOF
   $ cat > $TESTTMP/extlibroot/lsub1/lsub2/unused.py <<EOF
   > raise Exception("extlibroot.lsub1.lsub2.unused is loaded unintentionally")
   > EOF
   $ cat > $TESTTMP/extlibroot/lsub1/lsub2/used.py <<EOF
   > detail = "this is extlibroot.lsub1.lsub2.used"
   > EOF
 
 Setup sub-package of "external library", which causes instantiation of
 demandmod in "recurse down the module chain" code path. Relative
 importing with "absolute_import" feature isn't tested, because "level
 >=1 " doesn't cause instantiation of demandmod.
 
   $ mkdir -p $TESTTMP/extlibroot/recursedown/abs
   $ cat > $TESTTMP/extlibroot/recursedown/abs/used.py <<EOF
   > detail = "this is extlibroot.recursedown.abs.used"
   > EOF
   $ cat > $TESTTMP/extlibroot/recursedown/abs/__init__.py <<EOF
   > from __future__ import absolute_import
   > from extlibroot.recursedown.abs.used import detail
   > EOF
 
   $ mkdir -p $TESTTMP/extlibroot/recursedown/legacy
   $ cat > $TESTTMP/extlibroot/recursedown/legacy/used.py <<EOF
   > detail = "this is extlibroot.recursedown.legacy.used"
   > EOF
   $ cat > $TESTTMP/extlibroot/recursedown/legacy/__init__.py <<EOF
   > # legacy style (level == -1) import
   > from extlibroot.recursedown.legacy.used import detail
   > EOF
 
   $ cat > $TESTTMP/extlibroot/recursedown/__init__.py <<EOF
   > from __future__ import absolute_import
   > from extlibroot.recursedown.abs import detail as absdetail
   > from .legacy import detail as legacydetail
   > EOF
 
 Setup package that re-exports an attribute of its submodule as the same
 name. This leaves 'shadowing.used' pointing to 'used.detail', but still
 the submodule 'used' should be somehow accessible. (issue5617)
 
   $ mkdir -p $TESTTMP/extlibroot/shadowing
   $ cat > $TESTTMP/extlibroot/shadowing/used.py <<EOF
   > detail = "this is extlibroot.shadowing.used"
   > EOF
   $ cat > $TESTTMP/extlibroot/shadowing/proxied.py <<EOF
   > from __future__ import absolute_import
   > from extlibroot.shadowing.used import detail
   > EOF
   $ cat > $TESTTMP/extlibroot/shadowing/__init__.py <<EOF
   > from __future__ import absolute_import
   > from .used import detail as used
   > EOF
 
 Setup extension local modules to be imported with "absolute_import"
 feature.
 
   $ mkdir -p $TESTTMP/absextroot/xsub1/xsub2
   $ touch $TESTTMP/absextroot/xsub1/__init__.py
   $ touch $TESTTMP/absextroot/xsub1/xsub2/__init__.py
 
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/called.py <<EOF
   > def func():
   >     return "this is absextroot.xsub1.xsub2.called.func()"
   > EOF
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/unused.py <<EOF
   > raise Exception("absextroot.xsub1.xsub2.unused is loaded unintentionally")
   > EOF
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/used.py <<EOF
   > detail = "this is absextroot.xsub1.xsub2.used"
   > EOF
 
 Setup extension local modules to examine whether demand importing
 works as expected in "level > 1" case.
 
   $ cat > $TESTTMP/absextroot/relimportee.py <<EOF
   > detail = "this is absextroot.relimportee"
   > EOF
   $ cat > $TESTTMP/absextroot/xsub1/xsub2/relimporter.py <<EOF
   > from __future__ import absolute_import
   > from ... import relimportee
   > detail = "this relimporter imports %r" % (relimportee.detail)
   > EOF
 
 Setup modules, which actually import extension local modules at
 runtime.
 
   $ cat > $TESTTMP/absextroot/absolute.py << EOF
   > from __future__ import absolute_import
   > 
   > # import extension local modules absolutely (level = 0)
   > from absextroot.xsub1.xsub2 import used, unused
   > from absextroot.xsub1.xsub2.called import func
   > 
   > def getresult():
   >     result = []
   >     result.append(used.detail)
   >     result.append(func())
   >     return result
   > EOF
 
   $ cat > $TESTTMP/absextroot/relative.py << EOF
   > from __future__ import absolute_import
   > 
   > # import extension local modules relatively (level == 1)
   > from .xsub1.xsub2 import used, unused
   > from .xsub1.xsub2.called import func
   > 
   > # import a module, which implies "importing with level > 1"
   > from .xsub1.xsub2 import relimporter
   > 
   > def getresult():
   >     result = []
   >     result.append(used.detail)
   >     result.append(func())
   >     result.append(relimporter.detail)
   >     return result
   > EOF
 
 Setup main procedure of extension.
 
   $ cat > $TESTTMP/absextroot/__init__.py <<EOF
   > from __future__ import absolute_import
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > 
   > # "absolute" and "relative" shouldn't be imported before actual
   > # command execution, because (1) they import same modules, and (2)
   > # preceding import (= instantiate "demandmod" object instead of
   > # real "module" object) might hide problem of succeeding import.
   > 
   > @command(b'showabsolute', [], norepo=True)
   > def showabsolute(ui, *args, **opts):
   >     from absextroot import absolute
   >     ui.write('ABS: %s\n' % '\nABS: '.join(absolute.getresult()))
   > 
   > @command(b'showrelative', [], norepo=True)
   > def showrelative(ui, *args, **opts):
   >     from . import relative
   >     ui.write('REL: %s\n' % '\nREL: '.join(relative.getresult()))
   > 
   > # import modules from external library
   > from extlibroot.lsub1.lsub2 import used as lused, unused as lunused
   > from extlibroot.lsub1.lsub2.called import func as lfunc
   > from extlibroot.recursedown import absdetail, legacydetail
   > from extlibroot.shadowing import proxied
   > 
   > def uisetup(ui):
   >     result = []
   >     result.append(lused.detail)
   >     result.append(lfunc())
   >     result.append(absdetail)
   >     result.append(legacydetail)
   >     result.append(proxied.detail)
   >     ui.write('LIB: %s\n' % '\nLIB: '.join(result))
   > EOF
 
 Examine module importing.
 
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.absextroot=$TESTTMP/absextroot showabsolute)
   LIB: this is extlibroot.lsub1.lsub2.used
   LIB: this is extlibroot.lsub1.lsub2.called.func()
   LIB: this is extlibroot.recursedown.abs.used
   LIB: this is extlibroot.recursedown.legacy.used
   LIB: this is extlibroot.shadowing.used
   ABS: this is absextroot.xsub1.xsub2.used
   ABS: this is absextroot.xsub1.xsub2.called.func()
 
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.absextroot=$TESTTMP/absextroot showrelative)
   LIB: this is extlibroot.lsub1.lsub2.used
   LIB: this is extlibroot.lsub1.lsub2.called.func()
   LIB: this is extlibroot.recursedown.abs.used
   LIB: this is extlibroot.recursedown.legacy.used
   LIB: this is extlibroot.shadowing.used
   REL: this is absextroot.xsub1.xsub2.used
   REL: this is absextroot.xsub1.xsub2.called.func()
   REL: this relimporter imports 'this is absextroot.relimportee'
 
 Examine whether sub-module is imported relatively as expected.
 
 See also issue5208 for detail about example case on Python 3.x.
 
   $ f -q $TESTTMP/extlibroot/lsub1/lsub2/notexist.py
   $TESTTMP/extlibroot/lsub1/lsub2/notexist.py: file not found
 
   $ cat > $TESTTMP/notexist.py <<EOF
   > text = 'notexist.py at root is loaded unintentionally\n'
   > EOF
 
   $ cat > $TESTTMP/checkrelativity.py <<EOF
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > 
   > # demand import avoids failure of importing notexist here
   > import extlibroot.lsub1.lsub2.notexist
   > 
   > @command(b'checkrelativity', [], norepo=True)
   > def checkrelativity(ui, *args, **opts):
   >     try:
   >         ui.write(extlibroot.lsub1.lsub2.notexist.text)
   >         return 1 # unintentional success
   >     except ImportError:
   >         pass # intentional failure
   > EOF
 
   $ (PYTHONPATH=${PYTHONPATH}${PATHSEP}${TESTTMP}; hg --config extensions.checkrelativity=$TESTTMP/checkrelativity.py checkrelativity)
 
 #endif
 
 Make sure a broken uisetup doesn't globally break hg:
   $ cat > $TESTTMP/baduisetup.py <<EOF
   > def uisetup(ui):
   >     1/0
   > EOF
 
 Even though the extension fails during uisetup, hg is still basically usable:
   $ hg --config extensions.baduisetup=$TESTTMP/baduisetup.py version
   Traceback (most recent call last):
     File "*/mercurial/extensions.py", line *, in _runuisetup (glob)
       uisetup(ui)
     File "$TESTTMP/baduisetup.py", line 2, in uisetup
       1/0
   ZeroDivisionError: integer division or modulo by zero
   *** failed to set up extension baduisetup: integer division or modulo by zero
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-2017 Matt Mackall and others
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
   $ cd ..
 
 hide outer repo
   $ hg init
 
   $ cat > empty.py <<EOF
   > '''empty cmdtable
   > '''
   > cmdtable = {}
   > EOF
   $ emptypath=`pwd`/empty.py
   $ echo "empty = $emptypath" >> $HGRCPATH
   $ hg help empty
   empty extension - empty cmdtable
   
   no commands defined
 
 
   $ echo 'empty = !' >> $HGRCPATH
 
   $ cat > debugextension.py <<EOF
   > '''only debugcommands
   > '''
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'debugfoobar', [], 'hg debugfoobar')
   > def debugfoobar(ui, repo, *args, **opts):
   >     "yet another debug command"
   >     pass
   > @command(b'foo', [], 'hg foo')
   > def foo(ui, repo, *args, **opts):
   >     """yet another foo command
   >     This command has been DEPRECATED since forever.
   >     """
   >     pass
   > EOF
   $ debugpath=`pwd`/debugextension.py
   $ echo "debugextension = $debugpath" >> $HGRCPATH
 
   $ hg help debugextension
   hg debugextensions
   
   show information about active extensions
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 
 
   $ hg --verbose help debugextension
   hg debugextensions
   
   show information about active extensions
   
   options:
   
    -T --template TEMPLATE display with template (EXPERIMENTAL)
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 
 
 
 
 
   $ hg --debug help debugextension
   hg debugextensions
   
   show information about active extensions
   
   options:
   
    -T --template TEMPLATE display with template (EXPERIMENTAL)
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 
 
 
 
   $ echo 'debugextension = !' >> $HGRCPATH
 
 Asking for help about a deprecated extension should do something useful:
 
   $ hg help glog
   'glog' is provided by the following extension:
   
       graphlog      command to view revision graphs from a shell (DEPRECATED)
   
   (use 'hg help extensions' for information on enabling extensions)
 
 Extension module help vs command help:
 
   $ echo 'extdiff =' >> $HGRCPATH
   $ hg help extdiff
   hg extdiff [OPT]... [FILE]...
   
   use external program to diff repository (or selected files)
   
       Show differences between revisions for the specified files, using an
       external program. The default program used is diff, with default options
       "-Npru".
   
       To select a different program, use the -p/--program option. The program
       will be passed the names of two directories to compare. To pass additional
       options to the program, use -o/--option. These will be passed before the
       names of the directories to compare.
   
       When two revision arguments are given, then changes are shown between
       those revisions. If only one revision is specified then that revision is
       compared to the working directory, and, when no revisions are specified,
       the working directory files are compared to its parent.
   
   (use 'hg help -e extdiff' to show help for the extdiff extension)
   
   options ([+] can be repeated):
   
    -p --program CMD         comparison program to run
    -o --option OPT [+]      pass option to comparison program
    -r --rev REV [+]         revision
    -c --change REV          change made by revision
       --patch               compare patches for two revisions
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
   
   (some details hidden, use --verbose to show complete help)
 
 
 
 
 
 
 
 
 
 
   $ hg help --extension extdiff
   extdiff extension - command to allow external programs to compare revisions
   
   The extdiff Mercurial extension allows you to use external programs to compare
   revisions, or revision with working directory. The external diff programs are
   called with a configurable set of options and two non-option arguments: paths
   to directories containing snapshots of files to compare.
   
   The extdiff extension also allows you to configure new diff commands, so you
   do not need to type 'hg extdiff -p kdiff3' always.
   
     [extdiff]
     # add new command that runs GNU diff(1) in 'context diff' mode
     cdiff = gdiff -Nprc5
     ## or the old way:
     #cmd.cdiff = gdiff
     #opts.cdiff = -Nprc5
   
     # add new command called meld, runs meld (no need to name twice).  If
     # the meld executable is not available, the meld tool in [merge-tools]
     # will be used, if available
     meld =
   
     # add new command called vimdiff, runs gvimdiff with DirDiff plugin
     # (see http://www.vim.org/scripts/script.php?script_id=102) Non
     # English user, be sure to put "let g:DirDiffDynamicDiffText = 1" in
     # your .vimrc
     vimdiff = gvim -f "+next" \
               "+execute 'DirDiff' fnameescape(argv(0)) fnameescape(argv(1))"
   
   Tool arguments can include variables that are expanded at runtime:
   
     $parent1, $plabel1 - filename, descriptive label of first parent
     $child,   $clabel  - filename, descriptive label of child revision
     $parent2, $plabel2 - filename, descriptive label of second parent
     $root              - repository root
     $parent is an alias for $parent1.
   
   The extdiff extension will look in your [diff-tools] and [merge-tools]
   sections for diff tool arguments, when none are specified in [extdiff].
   
     [extdiff]
     kdiff3 =
   
     [diff-tools]
     kdiff3.diffargs=--L1 '$plabel1' --L2 '$clabel' $parent $child
   
   You can use -I/-X and list of file or directory names like normal 'hg diff'
   command. The extdiff extension makes snapshots of only needed files, so
   running the external diff program will actually be pretty fast (at least
   faster than having to compare the entire tree).
   
   list of commands:
   
    extdiff       use external program to diff repository (or selected files)
   
   (use 'hg help -v -e extdiff' to show built-in aliases and global options)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   $ echo 'extdiff = !' >> $HGRCPATH
 
 Test help topic with same name as extension
 
   $ cat > multirevs.py <<EOF
   > from mercurial import commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > """multirevs extension
   > Big multi-line module docstring."""
   > @command(b'multirevs', [], 'ARG', norepo=True)
   > def multirevs(ui, repo, arg, *args, **opts):
   >     """multirevs command"""
   >     pass
   > EOF
   $ echo "multirevs = multirevs.py" >> $HGRCPATH
 
   $ hg help multirevs | tail
-        bookmark (this works because the last revision of the revset is used):
+        used):
   
           hg update :@
   
       - Show diff between tags 1.3 and 1.5 (this works because the first and the
         last revisions of the revset are used):
   
           hg diff -r 1.3::1.5
   
   use 'hg help -c multirevs' to see help for the multirevs command
 
 
 
 
 
 
   $ hg help -c multirevs
   hg multirevs ARG
   
   multirevs command
   
   (some details hidden, use --verbose to show complete help)
 
 
 
   $ hg multirevs
   hg multirevs: invalid arguments
   hg multirevs ARG
   
   multirevs command
   
   (use 'hg multirevs -h' to show more help)
   [255]
 
 
 
   $ echo "multirevs = !" >> $HGRCPATH
 
 Issue811: Problem loading extensions twice (by site and by user)
 
   $ cat <<EOF >> $HGRCPATH
   > mq =
   > strip =
   > hgext.mq =
   > hgext/mq =
   > EOF
 
 Show extensions:
 (note that mq force load strip, also checking it's not loaded twice)
 
   $ hg debugextensions
   mq
   strip
 
 For extensions, which name matches one of its commands, help
 message should ask '-v -e' to get list of built-in aliases
 along with extension help itself
 
   $ mkdir $TESTTMP/d
   $ cat > $TESTTMP/d/dodo.py <<EOF
   > """
   > This is an awesome 'dodo' extension. It does nothing and
   > writes 'Foo foo'
   > """
   > from mercurial import commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'dodo', [], 'hg dodo')
   > def dodo(ui, *args, **kwargs):
   >     """Does nothing"""
   >     ui.write("I do nothing. Yay\\n")
   > @command(b'foofoo', [], 'hg foofoo')
   > def foofoo(ui, *args, **kwargs):
   >     """Writes 'Foo foo'"""
   >     ui.write("Foo foo\\n")
   > EOF
   $ dodopath=$TESTTMP/d/dodo.py
 
   $ echo "dodo = $dodopath" >> $HGRCPATH
 
 Make sure that user is asked to enter '-v -e' to get list of built-in aliases
   $ hg help -e dodo
   dodo extension -
   
   This is an awesome 'dodo' extension. It does nothing and writes 'Foo foo'
   
   list of commands:
   
    dodo          Does nothing
    foofoo        Writes 'Foo foo'
   
   (use 'hg help -v -e dodo' to show built-in aliases and global options)
 
 Make sure that '-v -e' prints list of built-in aliases along with
 extension help itself
   $ hg help -v -e dodo
   dodo extension -
   
   This is an awesome 'dodo' extension. It does nothing and writes 'Foo foo'
   
   list of commands:
   
    dodo          Does nothing
    foofoo        Writes 'Foo foo'
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 Make sure that single '-v' option shows help and built-ins only for 'dodo' command
   $ hg help -v dodo
   hg dodo
   
   Does nothing
   
   (use 'hg help -e dodo' to show help for the dodo extension)
   
   options:
   
     --mq operate on patch repository
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 In case when extension name doesn't match any of its commands,
 help message should ask for '-v' to get list of built-in aliases
 along with extension help
   $ cat > $TESTTMP/d/dudu.py <<EOF
   > """
   > This is an awesome 'dudu' extension. It does something and
   > also writes 'Beep beep'
   > """
   > from mercurial import commands, registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command(b'something', [], 'hg something')
   > def something(ui, *args, **kwargs):
   >     """Does something"""
   >     ui.write("I do something. Yaaay\\n")
   > @command(b'beep', [], 'hg beep')
   > def beep(ui, *args, **kwargs):
   >     """Writes 'Beep beep'"""
   >     ui.write("Beep beep\\n")
   > EOF
   $ dudupath=$TESTTMP/d/dudu.py
 
   $ echo "dudu = $dudupath" >> $HGRCPATH
 
   $ hg help -e dudu
   dudu extension -
   
   This is an awesome 'dudu' extension. It does something and also writes 'Beep
   beep'
   
   list of commands:
   
    beep          Writes 'Beep beep'
    something     Does something
   
   (use 'hg help -v dudu' to show built-in aliases and global options)
 
 In case when extension name doesn't match any of its commands,
 help options '-v' and '-v -e' should be equivalent
   $ hg help -v dudu
   dudu extension -
   
   This is an awesome 'dudu' extension. It does something and also writes 'Beep
   beep'
   
   list of commands:
   
    beep          Writes 'Beep beep'
    something     Does something
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
   $ hg help -v -e dudu
   dudu extension -
   
   This is an awesome 'dudu' extension. It does something and also writes 'Beep
   beep'
   
   list of commands:
   
    beep          Writes 'Beep beep'
    something     Does something
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 Disabled extension commands:
 
   $ ORGHGRCPATH=$HGRCPATH
   $ HGRCPATH=
   $ export HGRCPATH
   $ hg help email
   'email' is provided by the following extension:
   
       patchbomb     command to send changesets as (a series of) patch emails
   
   (use 'hg help extensions' for information on enabling extensions)
 
 
   $ hg qdel
   hg: unknown command 'qdel'
   'qdelete' is provided by the following extension:
   
       mq            manage a stack of patches
   
   (use 'hg help extensions' for information on enabling extensions)
   [255]
 
 
   $ hg churn
   hg: unknown command 'churn'
   'churn' is provided by the following extension:
   
       churn         command to display statistics about repository history
   
   (use 'hg help extensions' for information on enabling extensions)
   [255]
 
 
 
 Disabled extensions:
 
   $ hg help churn
   churn extension - command to display statistics about repository history
   
   (use 'hg help extensions' for information on enabling extensions)
 
   $ hg help patchbomb
   patchbomb extension - command to send changesets as (a series of) patch emails
   
   The series is started off with a "[PATCH 0 of N]" introduction, which
   describes the series as a whole.
   
   Each patch email has a Subject line of "[PATCH M of N] ...", using the first
   line of the changeset description as the subject text. The message contains
   two or three body parts:
   
   - The changeset description.
   - [Optional] The result of running diffstat on the patch.
   - The patch itself, as generated by 'hg export'.
   
   Each message refers to the first in the series using the In-Reply-To and
   References headers, so they will show up as a sequence in threaded mail and
   news readers, and in mail archives.
   
   To configure other defaults, add a section like this to your configuration
   file:
   
     [email]
     from = My Name <my@email>
     to = recipient1, recipient2, ...
     cc = cc1, cc2, ...
     bcc = bcc1, bcc2, ...
     reply-to = address1, address2, ...
   
   Use "[patchbomb]" as configuration section name if you need to override global
   "[email]" address settings.
   
   Then you can use the 'hg email' command to mail a series of changesets as a
   patchbomb.
   
   You can also either configure the method option in the email section to be a
   sendmail compatible mailer or fill out the [smtp] section so that the
   patchbomb extension can automatically send patchbombs directly from the
   commandline. See the [email] and [smtp] sections in hgrc(5) for details.
   
   By default, 'hg email' will prompt for a "To" or "CC" header if you do not
   supply one via configuration or the command line.  You can override this to
   never prompt by configuring an empty value:
   
     [email]
     cc =
   
   You can control the default inclusion of an introduction message with the
   "patchbomb.intro" configuration option. The configuration is always
   overwritten by command line flags like --intro and --desc:
   
     [patchbomb]
     intro=auto   # include introduction message if more than 1 patch (default)
     intro=never  # never include an introduction message
     intro=always # always include an introduction message
   
   You can specify a template for flags to be added in subject prefixes. Flags
   specified by --flag option are exported as "{flags}" keyword:
   
     [patchbomb]
     flagtemplate = "{separate(' ',
                               ifeq(branch, 'default', '', branch|upper),
                               flags)}"
   
   You can set patchbomb to always ask for confirmation by setting
   "patchbomb.confirm" to true.
   
   (use 'hg help extensions' for information on enabling extensions)
 
 
 Broken disabled extension and command:
 
   $ mkdir hgext
   $ echo > hgext/__init__.py
   $ cat > hgext/broken.py <<EOF
   > "broken extension'
   > EOF
   $ cat > path.py <<EOF
   > import os, sys
   > sys.path.insert(0, os.environ['HGEXTPATH'])
   > EOF
   $ HGEXTPATH=`pwd`
   $ export HGEXTPATH
 
   $ hg --config extensions.path=./path.py help broken
   broken extension - (no help text available)
   
   (use 'hg help extensions' for information on enabling extensions)
 
 
   $ cat > hgext/forest.py <<EOF
   > cmdtable = None
   > EOF
   $ hg --config extensions.path=./path.py help foo > /dev/null
   warning: error finding commands in $TESTTMP/hgext/forest.py (glob)
   abort: no such help topic: foo
   (try 'hg help --keyword foo')
   [255]
 
   $ cat > throw.py <<EOF
   > from mercurial import commands, registrar, util
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > class Bogon(Exception): pass
   > @command(b'throw', [], 'hg throw', norepo=True)
   > def throw(ui, **opts):
   >     """throws an exception"""
   >     raise Bogon()
   > EOF
 
 No declared supported version, extension complains:
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension throw
   ** which supports versions unknown of Mercurial.
   ** Please disable throw and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM * (glob)
   ** Extensions loaded: throw
 
 empty declaration of supported version, extension complains:
   $ echo "testedwith = ''" >> throw.py
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension throw
   ** which supports versions unknown of Mercurial.
   ** Please disable throw and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw
 
 If the extension specifies a buglink, show that:
   $ echo 'buglink = "http://example.com/bts"' >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension throw
   ** which supports versions unknown of Mercurial.
   ** Please disable throw and try your action again.
   ** If that fixes the bug please report it to http://example.com/bts
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw
 
 If the extensions declare outdated versions, accuse the older extension first:
   $ echo "from mercurial import util" >> older.py
   $ echo "util.version = lambda:'2.2'" >> older.py
   $ echo "testedwith = '1.9.3'" >> older.py
   $ echo "testedwith = '2.1.1'" >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension older
   ** which supports versions 1.9 of Mercurial.
   ** Please disable older and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM (version 2.2)
   ** Extensions loaded: throw, older
 
 One extension only tested with older, one only with newer versions:
   $ echo "util.version = lambda:'2.1'" >> older.py
   $ rm -f older.pyc older.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension older
   ** which supports versions 1.9 of Mercurial.
   ** Please disable older and try your action again.
   ** If that fixes the bug please report it to the extension author.
   ** Python * (glob)
   ** Mercurial Distributed SCM (version 2.1)
   ** Extensions loaded: throw, older
 
 Older extension is tested with current version, the other only with newer:
   $ echo "util.version = lambda:'1.9.3'" >> older.py
   $ rm -f older.pyc older.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   throw 2>&1 | egrep '^\*\*'
   ** Unknown exception encountered with possibly-broken third-party extension throw
   ** which supports versions 2.1 of Mercurial.
   ** Please disable throw and try your action again.
   ** If that fixes the bug please report it to http://example.com/bts
   ** Python * (glob)
   ** Mercurial Distributed SCM (version 1.9.3)
   ** Extensions loaded: throw, older
 
 Ability to point to a different point
   $ hg --config extensions.throw=throw.py --config extensions.older=older.py \
   >   --config ui.supportcontact='Your Local Goat Lenders' throw 2>&1 | egrep '^\*\*'
   ** unknown exception encountered, please report by visiting
   ** Your Local Goat Lenders
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw, older
 
 Declare the version as supporting this hg version, show regular bts link:
   $ hgver=`hg debuginstall -T '{hgver}'`
   $ echo 'testedwith = """'"$hgver"'"""' >> throw.py
   $ if [ -z "$hgver" ]; then
   >   echo "unable to fetch a mercurial version. Make sure __version__ is correct";
   > fi
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** unknown exception encountered, please report by visiting
   ** https://mercurial-scm.org/wiki/BugTracker
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw
 
 Patch version is ignored during compatibility check
   $ echo "testedwith = '3.2'" >> throw.py
   $ echo "util.version = lambda:'3.2.2'" >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg --config extensions.throw=throw.py throw 2>&1 | egrep '^\*\*'
   ** unknown exception encountered, please report by visiting
   ** https://mercurial-scm.org/wiki/BugTracker
   ** Python * (glob)
   ** Mercurial Distributed SCM (*) (glob)
   ** Extensions loaded: throw
 
 Test version number support in 'hg version':
   $ echo '__version__ = (1, 2, 3)' >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg version -v
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   
   Enabled extensions:
   
 
   $ hg version -v --config extensions.throw=throw.py
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   
   Enabled extensions:
   
     throw  external  1.2.3
   $ echo 'getversion = lambda: "1.twentythree"' >> throw.py
   $ rm -f throw.pyc throw.pyo
   $ rm -Rf __pycache__
   $ hg version -v --config extensions.throw=throw.py --config extensions.strip=
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   
   Enabled extensions:
   
     throw  external  1.twentythree
     strip  internal  
 
   $ hg version -q --config extensions.throw=throw.py
   Mercurial Distributed SCM (version *) (glob)
 
 Test JSON output of version:
 
   $ hg version -Tjson
   [
    {
     "extensions": [],
     "ver": "*" (glob)
    }
   ]
 
   $ hg version --config extensions.throw=throw.py -Tjson
   [
    {
     "extensions": [{"bundled": false, "name": "throw", "ver": "1.twentythree"}],
     "ver": "3.2.2"
    }
   ]
 
   $ hg version --config extensions.strip= -Tjson
   [
    {
     "extensions": [{"bundled": true, "name": "strip", "ver": null}],
     "ver": "*" (glob)
    }
   ]
 
 Test template output of version:
 
   $ hg version --config extensions.throw=throw.py --config extensions.strip= \
   > -T'{extensions % "{name}  {pad(ver, 16)}  ({if(bundled, "internal", "external")})\n"}'
   throw  1.twentythree     (external)
   strip                    (internal)
 
 Refuse to load extensions with minimum version requirements
 
   $ cat > minversion1.py << EOF
   > from mercurial import util
   > util.version = lambda: '3.5.2'
   > minimumhgversion = '3.6'
   > EOF
   $ hg --config extensions.minversion=minversion1.py version
   (third party extension minversion requires version 3.6 or newer of Mercurial; disabling)
   Mercurial Distributed SCM (version 3.5.2)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
   $ cat > minversion2.py << EOF
   > from mercurial import util
   > util.version = lambda: '3.6'
   > minimumhgversion = '3.7'
   > EOF
   $ hg --config extensions.minversion=minversion2.py version 2>&1 | egrep '\(third'
   (third party extension minversion requires version 3.7 or newer of Mercurial; disabling)
 
 Can load version that is only off by point release
 
   $ cat > minversion2.py << EOF
   > from mercurial import util
   > util.version = lambda: '3.6.1'
   > minimumhgversion = '3.6'
   > EOF
   $ hg --config extensions.minversion=minversion3.py version 2>&1 | egrep '\(third'
   [1]
 
 Can load minimum version identical to current
 
   $ cat > minversion3.py << EOF
   > from mercurial import util
   > util.version = lambda: '3.5'
   > minimumhgversion = '3.5'
   > EOF
   $ hg --config extensions.minversion=minversion3.py version 2>&1 | egrep '\(third'
   [1]
 
 Restore HGRCPATH
 
   $ HGRCPATH=$ORGHGRCPATH
   $ export HGRCPATH
 
 Commands handling multiple repositories at a time should invoke only
 "reposetup()" of extensions enabling in the target repository.
 
   $ mkdir reposetup-test
   $ cd reposetup-test
 
   $ cat > $TESTTMP/reposetuptest.py <<EOF
   > from mercurial import extensions
   > def reposetup(ui, repo):
   >     ui.write('reposetup() for %s\n' % (repo.root))
   >     ui.flush()
   > EOF
   $ hg init src
   $ echo a > src/a
   $ hg -R src commit -Am '#0 at src/a'
   adding a
   $ echo '[extensions]' >> src/.hg/hgrc
   $ echo '# enable extension locally' >> src/.hg/hgrc
   $ echo "reposetuptest = $TESTTMP/reposetuptest.py" >> src/.hg/hgrc
   $ hg -R src status
   reposetup() for $TESTTMP/reposetup-test/src (glob)
   reposetup() for $TESTTMP/reposetup-test/src (glob) (chg !)
 
   $ hg clone -U src clone-dst1
   reposetup() for $TESTTMP/reposetup-test/src (glob)
   $ hg init push-dst1
   $ hg -q -R src push push-dst1
   reposetup() for $TESTTMP/reposetup-test/src (glob)
   $ hg init pull-src1
   $ hg -q -R pull-src1 pull src
   reposetup() for $TESTTMP/reposetup-test/src (glob)
 
   $ cat <<EOF >> $HGRCPATH
   > [extensions]
   > # disable extension globally and explicitly
   > reposetuptest = !
   > EOF
   $ hg clone -U src clone-dst2
   reposetup() for $TESTTMP/reposetup-test/src (glob)
   $ hg init push-dst2
   $ hg -q -R src push push-dst2
   reposetup() for $TESTTMP/reposetup-test/src (glob)
   $ hg init pull-src2
   $ hg -q -R pull-src2 pull src
   reposetup() for $TESTTMP/reposetup-test/src (glob)
 
   $ cat <<EOF >> $HGRCPATH
   > [extensions]
   > # enable extension globally
   > reposetuptest = $TESTTMP/reposetuptest.py
   > EOF
   $ hg clone -U src clone-dst3
   reposetup() for $TESTTMP/reposetup-test/src (glob)
   reposetup() for $TESTTMP/reposetup-test/clone-dst3 (glob)
   $ hg init push-dst3
   reposetup() for $TESTTMP/reposetup-test/push-dst3 (glob)
   $ hg -q -R src push push-dst3
   reposetup() for $TESTTMP/reposetup-test/src (glob)
   reposetup() for $TESTTMP/reposetup-test/push-dst3 (glob)
   $ hg init pull-src3
   reposetup() for $TESTTMP/reposetup-test/pull-src3 (glob)
   $ hg -q -R pull-src3 pull src
   reposetup() for $TESTTMP/reposetup-test/pull-src3 (glob)
   reposetup() for $TESTTMP/reposetup-test/src (glob)
 
   $ echo '[extensions]' >> src/.hg/hgrc
   $ echo '# disable extension locally' >> src/.hg/hgrc
   $ echo 'reposetuptest = !' >> src/.hg/hgrc
   $ hg clone -U src clone-dst4
   reposetup() for $TESTTMP/reposetup-test/clone-dst4 (glob)
   $ hg init push-dst4
   reposetup() for $TESTTMP/reposetup-test/push-dst4 (glob)
   $ hg -q -R src push push-dst4
   reposetup() for $TESTTMP/reposetup-test/push-dst4 (glob)
   $ hg init pull-src4
   reposetup() for $TESTTMP/reposetup-test/pull-src4 (glob)
   $ hg -q -R pull-src4 pull src
   reposetup() for $TESTTMP/reposetup-test/pull-src4 (glob)
 
 disabling in command line overlays with all configuration
   $ hg --config extensions.reposetuptest=! clone -U src clone-dst5
   $ hg --config extensions.reposetuptest=! init push-dst5
   $ hg --config extensions.reposetuptest=! -q -R src push push-dst5
   $ hg --config extensions.reposetuptest=! init pull-src5
   $ hg --config extensions.reposetuptest=! -q -R pull-src5 pull src
 
   $ cat <<EOF >> $HGRCPATH
   > [extensions]
   > # disable extension globally and explicitly
   > reposetuptest = !
   > EOF
   $ hg init parent
   $ hg init parent/sub1
   $ echo 1 > parent/sub1/1
   $ hg -R parent/sub1 commit -Am '#0 at parent/sub1'
   adding 1
   $ hg init parent/sub2
   $ hg init parent/sub2/sub21
   $ echo 21 > parent/sub2/sub21/21
   $ hg -R parent/sub2/sub21 commit -Am '#0 at parent/sub2/sub21'
   adding 21
   $ cat > parent/sub2/.hgsub <<EOF
   > sub21 = sub21
   > EOF
   $ hg -R parent/sub2 commit -Am '#0 at parent/sub2'
   adding .hgsub
   $ hg init parent/sub3
   $ echo 3 > parent/sub3/3
   $ hg -R parent/sub3 commit -Am '#0 at parent/sub3'
   adding 3
   $ cat > parent/.hgsub <<EOF
   > sub1 = sub1
   > sub2 = sub2
   > sub3 = sub3
   > EOF
   $ hg -R parent commit -Am '#0 at parent'
   adding .hgsub
   $ echo '[extensions]' >> parent/.hg/hgrc
   $ echo '# enable extension locally' >> parent/.hg/hgrc
   $ echo "reposetuptest = $TESTTMP/reposetuptest.py" >> parent/.hg/hgrc
   $ cp parent/.hg/hgrc parent/sub2/.hg/hgrc
   $ hg -R parent status -S -A
   reposetup() for $TESTTMP/reposetup-test/parent (glob)
   reposetup() for $TESTTMP/reposetup-test/parent/sub2 (glob)
   C .hgsub
   C .hgsubstate
   C sub1/1
   C sub2/.hgsub
   C sub2/.hgsubstate
   C sub2/sub21/21
   C sub3/3
 
   $ cd ..
 
 Prohibit registration of commands that don't use @command (issue5137)
 
   $ hg init deprecated
   $ cd deprecated
 
   $ cat <<EOF > deprecatedcmd.py
   > def deprecatedcmd(repo, ui):
   >     pass
   > cmdtable = {
   >     'deprecatedcmd': (deprecatedcmd, [], ''),
   > }
   > EOF
   $ cat <<EOF > .hg/hgrc
   > [extensions]
   > deprecatedcmd = `pwd`/deprecatedcmd.py
   > mq = !
   > hgext.mq = !
   > hgext/mq = !
   > EOF
 
   $ hg deprecatedcmd > /dev/null
   *** failed to import extension deprecatedcmd from $TESTTMP/deprecated/deprecatedcmd.py: missing attributes: norepo, optionalrepo, inferrepo
   *** (use @command decorator to register 'deprecatedcmd')
   hg: unknown command 'deprecatedcmd'
   [255]
 
  the extension shouldn't be loaded at all so the mq works:
 
   $ hg qseries --config extensions.mq= > /dev/null
   *** failed to import extension deprecatedcmd from $TESTTMP/deprecated/deprecatedcmd.py: missing attributes: norepo, optionalrepo, inferrepo
   *** (use @command decorator to register 'deprecatedcmd')
 
   $ cd ..
 
 Test synopsis and docstring extending
 
   $ hg init exthelp
   $ cat > exthelp.py <<EOF
   > from mercurial import commands, extensions
   > def exbookmarks(orig, *args, **opts):
   >     return orig(*args, **opts)
   > def uisetup(ui):
   >     synopsis = ' GREPME [--foo] [-x]'
   >     docstring = '''
   >     GREPME make sure that this is in the help!
   >     '''
   >     extensions.wrapcommand(commands.table, 'bookmarks', exbookmarks,
   >                            synopsis, docstring)
   > EOF
   $ abspath=`pwd`/exthelp.py
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "exthelp = $abspath" >> $HGRCPATH
   $ cd exthelp
   $ hg help bookmarks | grep GREPME
   hg bookmarks [OPTIONS]... [NAME]... GREPME [--foo] [-x]
       GREPME make sure that this is in the help!
   $ cd ..
 
 Show deprecation warning for the use of cmdutil.command
 
   $ cat > nonregistrar.py <<EOF
   > from mercurial import cmdutil
   > cmdtable = {}
   > command = cmdutil.command(cmdtable)
   > @command(b'foo', [], norepo=True)
   > def foo(ui):
   >     pass
   > EOF
 
   $ hg --config extensions.nonregistrar=`pwd`/nonregistrar.py version > /dev/null
   devel-warn: cmdutil.command is deprecated, use registrar.command to register 'foo'
   (compatibility will be dropped after Mercurial-4.6, update your code.) * (glob)
 
 Prohibit the use of unicode strings as the default value of options
 
   $ hg init $TESTTMP/opt-unicode-default
 
   $ cat > $TESTTMP/test_unicode_default_value.py << EOF
   > from mercurial import registrar
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > @command('dummy', [('', 'opt', u'value', u'help')], 'ext [OPTIONS]')
   > def ext(*args, **opts):
   >     print(opts['opt'])
   > EOF
   $ cat > $TESTTMP/opt-unicode-default/.hg/hgrc << EOF
   > [extensions]
   > test_unicode_default_value = $TESTTMP/test_unicode_default_value.py
   > EOF
   $ hg -R $TESTTMP/opt-unicode-default dummy
   *** failed to import extension test_unicode_default_value from $TESTTMP/test_unicode_default_value.py: option 'dummy.opt' has a unicode default value
   *** (change the dummy.opt default value to a non-unicode string)
   hg: unknown command 'dummy'
   (did you mean summary?)
   [255]

tests/test-help.t

@@ -1,3376 +1,3376 b''
 Short help:
 
   $ hg
   Mercurial Distributed SCM
   
   basic commands:
   
    add           add the specified files on the next commit
    annotate      show changeset information by line for each file
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    forget        forget the specified files on the next commit
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    merge         merge another revision into working directory
    pull          pull changes from the specified source
    push          push changes to the specified destination
    remove        remove the specified files on the next commit
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    update        update working directory (or switch revisions)
   
   (use 'hg help' for the full list of commands or 'hg -v' for details)
 
   $ hg -q
    add           add the specified files on the next commit
    annotate      show changeset information by line for each file
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    forget        forget the specified files on the next commit
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    merge         merge another revision into working directory
    pull          pull changes from the specified source
    push          push changes to the specified destination
    remove        remove the specified files on the next commit
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    update        update working directory (or switch revisions)
 
   $ hg help
   Mercurial Distributed SCM
   
   list of commands:
   
    add           add the specified files on the next commit
    addremove     add all new files, delete all missing files
    annotate      show changeset information by line for each file
    archive       create an unversioned archive of a repository revision
    backout       reverse effect of earlier changeset
    bisect        subdivision search of changesets
    bookmarks     create a new bookmark or list existing bookmarks
    branch        set or show the current branch name
    branches      list repository named branches
    bundle        create a bundle file
    cat           output the current or given revision of files
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    config        show combined config settings from all hgrc files
    copy          mark files as copied for the next commit
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    files         list tracked files
    forget        forget the specified files on the next commit
    graft         copy changes from other branches onto the current branch
    grep          search revision history for a pattern in specified files
    heads         show branch heads
    help          show help for a given topic or a help overview
    identify      identify the working directory or specified revision
    import        import an ordered set of patches
    incoming      show new changesets found in source
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    manifest      output the current or given revision of the project manifest
    merge         merge another revision into working directory
    outgoing      show changesets not found in the destination
    paths         show aliases for remote repositories
    phase         set or show the current phase name
    pull          pull changes from the specified source
    push          push changes to the specified destination
    recover       roll back an interrupted transaction
    remove        remove the specified files on the next commit
    rename        rename files; equivalent of copy + remove
    resolve       redo merges or set/view the merge status of files
    revert        restore files to their checkout state
    root          print the root (top) of the current working directory
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    tag           add one or more tags for the current or given revision
    tags          list repository tags
    unbundle      apply one or more bundle files
    update        update working directory (or switch revisions)
    verify        verify the integrity of the repository
    version       output version and copyright information
   
   additional help topics:
   
    bundlespec    Bundle File Formats
    color         Colorizing Outputs
    config        Configuration Files
    dates         Date Formats
    diffs         Diff Formats
    environment   Environment Variables
    extensions    Using Additional Features
    filesets      Specifying File Sets
    glossary      Glossary
    hgignore      Syntax for Mercurial Ignore Files
    hgweb         Configuring hgweb
    internals     Technical implementation topics
    merge-tools   Merge Tools
    pager         Pager Support
    patterns      File Name Patterns
    phases        Working with Phases
    revisions     Specifying Revisions
    scripting     Using Mercurial from scripts and automation
    subrepos      Subrepositories
    templating    Template Usage
    urls          URL Paths
   
   (use 'hg help -v' to show built-in aliases and global options)
 
   $ hg -q help
    add           add the specified files on the next commit
    addremove     add all new files, delete all missing files
    annotate      show changeset information by line for each file
    archive       create an unversioned archive of a repository revision
    backout       reverse effect of earlier changeset
    bisect        subdivision search of changesets
    bookmarks     create a new bookmark or list existing bookmarks
    branch        set or show the current branch name
    branches      list repository named branches
    bundle        create a bundle file
    cat           output the current or given revision of files
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    config        show combined config settings from all hgrc files
    copy          mark files as copied for the next commit
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    files         list tracked files
    forget        forget the specified files on the next commit
    graft         copy changes from other branches onto the current branch
    grep          search revision history for a pattern in specified files
    heads         show branch heads
    help          show help for a given topic or a help overview
    identify      identify the working directory or specified revision
    import        import an ordered set of patches
    incoming      show new changesets found in source
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    manifest      output the current or given revision of the project manifest
    merge         merge another revision into working directory
    outgoing      show changesets not found in the destination
    paths         show aliases for remote repositories
    phase         set or show the current phase name
    pull          pull changes from the specified source
    push          push changes to the specified destination
    recover       roll back an interrupted transaction
    remove        remove the specified files on the next commit
    rename        rename files; equivalent of copy + remove
    resolve       redo merges or set/view the merge status of files
    revert        restore files to their checkout state
    root          print the root (top) of the current working directory
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    tag           add one or more tags for the current or given revision
    tags          list repository tags
    unbundle      apply one or more bundle files
    update        update working directory (or switch revisions)
    verify        verify the integrity of the repository
    version       output version and copyright information
   
   additional help topics:
   
    bundlespec    Bundle File Formats
    color         Colorizing Outputs
    config        Configuration Files
    dates         Date Formats
    diffs         Diff Formats
    environment   Environment Variables
    extensions    Using Additional Features
    filesets      Specifying File Sets
    glossary      Glossary
    hgignore      Syntax for Mercurial Ignore Files
    hgweb         Configuring hgweb
    internals     Technical implementation topics
    merge-tools   Merge Tools
    pager         Pager Support
    patterns      File Name Patterns
    phases        Working with Phases
    revisions     Specifying Revisions
    scripting     Using Mercurial from scripts and automation
    subrepos      Subrepositories
    templating    Template Usage
    urls          URL Paths
 
 Test extension help:
   $ hg help extensions --config extensions.rebase= --config extensions.children=
   Using Additional Features
   """""""""""""""""""""""""
   
       Mercurial has the ability to add new features through the use of
       extensions. Extensions may add new commands, add options to existing
       commands, change the default behavior of commands, or implement hooks.
   
       To enable the "foo" extension, either shipped with Mercurial or in the
       Python search path, create an entry for it in your configuration file,
       like this:
   
         [extensions]
         foo =
   
       You may also specify the full path to an extension:
   
         [extensions]
         myfeature = ~/.hgext/myfeature.py
   
       See 'hg help config' for more information on configuration files.
   
       Extensions are not loaded by default for a variety of reasons: they can
       increase startup overhead; they may be meant for advanced usage only; they
       may provide potentially dangerous abilities (such as letting you destroy
       or modify history); they might not be ready for prime time; or they may
       alter some usual behaviors of stock Mercurial. It is thus up to the user
       to activate extensions as needed.
   
       To explicitly disable an extension enabled in a configuration file of
       broader scope, prepend its path with !:
   
         [extensions]
         # disabling extension bar residing in /path/to/extension/bar.py
         bar = !/path/to/extension/bar.py
         # ditto, but no path was supplied for extension baz
         baz = !
   
       enabled extensions:
   
        children      command to display child changesets (DEPRECATED)
        rebase        command to move sets of revisions to a different ancestor
   
       disabled extensions:
   
        acl           hooks for controlling repository access
        blackbox      log repository events to a blackbox for debugging
        bugzilla      hooks for integrating with the Bugzilla bug tracker
        censor        erase file content at a given revision
        churn         command to display statistics about repository history
        clonebundles  advertise pre-generated bundles to seed clones
        convert       import revisions from foreign VCS repositories into
                      Mercurial
        eol           automatically manage newlines in repository files
        extdiff       command to allow external programs to compare revisions
        factotum      http authentication with factotum
        gpg           commands to sign and verify changesets
        hgk           browse the repository in a graphical way
        highlight     syntax highlighting for hgweb (requires Pygments)
        histedit      interactive history editing
        keyword       expand keywords in tracked files
        largefiles    track large binary files
        mq            manage a stack of patches
        notify        hooks for sending email push notifications
        patchbomb     command to send changesets as (a series of) patch emails
        purge         command to delete untracked files from the working
                      directory
        relink        recreates hardlinks between repository clones
        schemes       extend schemes with shortcuts to repository swarms
        share         share a common history between several working directories
        shelve        save and restore changes to the working directory
        strip         strip changesets and their descendants from history
        transplant    command to transplant changesets from another branch
        win32mbcs     allow the use of MBCS paths with problematic encodings
        zeroconf      discover and advertise repositories on the local network
 
 Verify that extension keywords appear in help templates
 
   $ hg help --config extensions.transplant= templating|grep transplant > /dev/null
 
 Test short command list with verbose option
 
   $ hg -v help shortlist
   Mercurial Distributed SCM
   
   basic commands:
   
    add           add the specified files on the next commit
    annotate, blame
                  show changeset information by line for each file
    clone         make a copy of an existing repository
    commit, ci    commit the specified files or all outstanding changes
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    forget        forget the specified files on the next commit
    init          create a new repository in the given directory
    log, history  show revision history of entire repository or files
    merge         merge another revision into working directory
    pull          pull changes from the specified source
    push          push changes to the specified destination
    remove, rm    remove the specified files on the next commit
    serve         start stand-alone webserver
    status, st    show changed files in the working directory
    summary, sum  summarize working directory state
    update, up, checkout, co
                  update working directory (or switch revisions)
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
   
   (use 'hg help' for the full list of commands)
 
   $ hg add -h
   hg add [OPTION]... [FILE]...
   
   add the specified files on the next commit
   
       Schedule files to be version controlled and added to the repository.
   
       The files will be added to the repository at the next commit. To undo an
       add before that, see 'hg forget'.
   
       If no names are given, add all files to the repository (except files
       matching ".hgignore").
   
       Returns 0 if all files are successfully added.
   
   options ([+] can be repeated):
   
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -n --dry-run             do not perform actions, just print output
   
   (some details hidden, use --verbose to show complete help)
 
 Verbose help for add
 
   $ hg add -hv
   hg add [OPTION]... [FILE]...
   
   add the specified files on the next commit
   
       Schedule files to be version controlled and added to the repository.
   
       The files will be added to the repository at the next commit. To undo an
       add before that, see 'hg forget'.
   
       If no names are given, add all files to the repository (except files
       matching ".hgignore").
   
       Examples:
   
         - New (unknown) files are added automatically by 'hg add':
   
             $ ls
             foo.c
             $ hg status
             ? foo.c
             $ hg add
             adding foo.c
             $ hg status
             A foo.c
   
         - Specific files to be added can be specified:
   
             $ ls
             bar.c  foo.c
             $ hg status
             ? bar.c
             ? foo.c
             $ hg add bar.c
             $ hg status
             A bar.c
             ? foo.c
   
       Returns 0 if all files are successfully added.
   
   options ([+] can be repeated):
   
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -n --dry-run             do not perform actions, just print output
   
   global options ([+] can be repeated):
   
    -R --repository REPO   repository root directory or name of overlay bundle
                           file
       --cwd DIR           change working directory
    -y --noninteractive    do not prompt, automatically pick the first choice for
                           all prompts
    -q --quiet             suppress output
    -v --verbose           enable additional output
       --color TYPE        when to colorize (boolean, always, auto, never, or
                           debug)
       --config CONFIG [+] set/override config option (use 'section.name=value')
       --debug             enable debugging output
       --debugger          start debugger
       --encoding ENCODE   set the charset encoding (default: ascii)
       --encodingmode MODE set the charset encoding mode (default: strict)
       --traceback         always print a traceback on exception
       --time              time how long the command takes
       --profile           print command execution profile
       --version           output version information and exit
    -h --help              display help and exit
       --hidden            consider hidden changesets
       --pager TYPE        when to paginate (boolean, always, auto, or never)
                           (default: auto)
 
 Test the textwidth config option
 
   $ hg root -h  --config ui.textwidth=50
   hg root
   
   print the root (top) of the current working
   directory
   
       Print the root directory of the current
       repository.
   
       Returns 0 on success.
   
   (some details hidden, use --verbose to show
   complete help)
 
 Test help option with version option
 
   $ hg add -h --version
   Mercurial Distributed SCM (version *) (glob)
   (see https://mercurial-scm.org for more information)
   
   Copyright (C) 2005-* Matt Mackall and others (glob)
   This is free software; see the source for copying conditions. There is NO
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
   $ hg add --skjdfks
   hg add: option --skjdfks not recognized
   hg add [OPTION]... [FILE]...
   
   add the specified files on the next commit
   
   options ([+] can be repeated):
   
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
    -n --dry-run             do not perform actions, just print output
   
   (use 'hg add -h' to show more help)
   [255]
 
 Test ambiguous command help
 
   $ hg help ad
   list of commands:
   
    add           add the specified files on the next commit
    addremove     add all new files, delete all missing files
   
   (use 'hg help -v ad' to show built-in aliases and global options)
 
 Test command without options
 
   $ hg help verify
   hg verify
   
   verify the integrity of the repository
   
       Verify the integrity of the current repository.
   
       This will perform an extensive check of the repository's integrity,
       validating the hashes and checksums of each entry in the changelog,
       manifest, and tracked files, as well as the integrity of their crosslinks
       and indices.
   
       Please see https://mercurial-scm.org/wiki/RepositoryCorruption for more
       information about recovery from corruption of the repository.
   
       Returns 0 on success, 1 if errors are encountered.
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help diff
   hg diff [OPTION]... ([-c REV] | [-r REV1 [-r REV2]]) [FILE]...
   
   diff repository (or selected files)
   
       Show differences between revisions for the specified files.
   
       Differences between files are shown using the unified diff format.
   
       Note:
          'hg diff' may generate unexpected results for merges, as it will
          default to comparing against the working directory's first parent
          changeset if no revisions are specified.
   
       When two revision arguments are given, then changes are shown between
       those revisions. If only one revision is specified then that revision is
       compared to the working directory, and, when no revisions are specified,
       the working directory files are compared to its first parent.
   
       Alternatively you can specify -c/--change with a revision to see the
       changes in that changeset relative to its first parent.
   
       Without the -a/--text option, diff will avoid generating diffs of files it
       detects as binary. With -a, diff will generate a diff anyway, probably
       with undesirable results.
   
       Use the -g/--git option to generate diffs in the git extended diff format.
       For more information, read 'hg help diffs'.
   
       Returns 0 on success.
   
   options ([+] can be repeated):
   
    -r --rev REV [+]         revision
    -c --change REV          change made by revision
    -a --text                treat all files as text
    -g --git                 use git extended diff format
       --binary              generate binary diffs in git mode (default)
       --nodates             omit dates from diff headers
       --noprefix            omit a/ and b/ prefixes from filenames
    -p --show-function       show which function each change is in
       --reverse             produce a diff that undoes the changes
    -w --ignore-all-space    ignore white space when comparing lines
    -b --ignore-space-change ignore changes in the amount of white space
    -B --ignore-blank-lines  ignore changes whose lines are all blank
    -Z --ignore-space-at-eol ignore changes in whitespace at EOL
    -U --unified NUM         number of lines of context to show
       --stat                output diffstat-style summary of changes
       --root DIR            produce diffs relative to subdirectory
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help status
   hg status [OPTION]... [FILE]...
   
   aliases: st
   
   show changed files in the working directory
   
       Show status of files in the repository. If names are given, only files
       that match are shown. Files that are clean or ignored or the source of a
       copy/move operation, are not listed unless -c/--clean, -i/--ignored,
       -C/--copies or -A/--all are given. Unless options described with "show
       only ..." are given, the options -mardu are used.
   
       Option -q/--quiet hides untracked (unknown and ignored) files unless
       explicitly requested with -u/--unknown or -i/--ignored.
   
       Note:
          'hg status' may appear to disagree with diff if permissions have
          changed or a merge has occurred. The standard diff format does not
          report permission changes and diff only reports changes relative to one
          merge parent.
   
       If one revision is given, it is used as the base revision. If two
       revisions are given, the differences between them are shown. The --change
       option can also be used as a shortcut to list the changed files of a
       revision from its first parent.
   
       The codes used to show the status of files are:
   
         M = modified
         A = added
         R = removed
         C = clean
         ! = missing (deleted by non-hg command, but still tracked)
         ? = not tracked
         I = ignored
           = origin of the previous file (with --copies)
   
       Returns 0 on success.
   
   options ([+] can be repeated):
   
    -A --all                 show status of all files
    -m --modified            show only modified files
    -a --added               show only added files
    -r --removed             show only removed files
    -d --deleted             show only deleted (but tracked) files
    -c --clean               show only files without changes
    -u --unknown             show only unknown (not tracked) files
    -i --ignored             show only ignored files
    -n --no-status           hide status prefix
    -C --copies              show source of copied files
    -0 --print0              end filenames with NUL, for use with xargs
       --rev REV [+]         show difference from revision
       --change REV          list the changed files of a revision
    -I --include PATTERN [+] include names matching the given patterns
    -X --exclude PATTERN [+] exclude names matching the given patterns
    -S --subrepos            recurse into subrepositories
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg -q help status
   hg status [OPTION]... [FILE]...
   
   show changed files in the working directory
 
   $ hg help foo
   abort: no such help topic: foo
   (try 'hg help --keyword foo')
   [255]
 
   $ hg skjdfks
   hg: unknown command 'skjdfks'
   Mercurial Distributed SCM
   
   basic commands:
   
    add           add the specified files on the next commit
    annotate      show changeset information by line for each file
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    forget        forget the specified files on the next commit
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    merge         merge another revision into working directory
    pull          pull changes from the specified source
    push          push changes to the specified destination
    remove        remove the specified files on the next commit
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    update        update working directory (or switch revisions)
   
   (use 'hg help' for the full list of commands or 'hg -v' for details)
   [255]
 
 Typoed command gives suggestion
   $ hg puls
   hg: unknown command 'puls'
   (did you mean one of pull, push?)
   [255]
 
 Not enabled extension gets suggested
 
   $ hg rebase
   hg: unknown command 'rebase'
   'rebase' is provided by the following extension:
   
       rebase        command to move sets of revisions to a different ancestor
   
   (use 'hg help extensions' for information on enabling extensions)
   [255]
 
 Disabled extension gets suggested
   $ hg --config extensions.rebase=! rebase
   hg: unknown command 'rebase'
   'rebase' is provided by the following extension:
   
       rebase        command to move sets of revisions to a different ancestor
   
   (use 'hg help extensions' for information on enabling extensions)
   [255]
 
 Make sure that we don't run afoul of the help system thinking that
 this is a section and erroring out weirdly.
 
   $ hg .log
   hg: unknown command '.log'
   (did you mean log?)
   [255]
 
   $ hg log.
   hg: unknown command 'log.'
   (did you mean log?)
   [255]
   $ hg pu.lh
   hg: unknown command 'pu.lh'
   (did you mean one of pull, push?)
   [255]
 
   $ cat > helpext.py <<EOF
   > import os
   > from mercurial import commands, registrar
   > 
   > cmdtable = {}
   > command = registrar.command(cmdtable)
   > 
   > @command(b'nohelp',
   >     [(b'', b'longdesc', 3, b'x'*90),
   >     (b'n', b'', None, b'normal desc'),
   >     (b'', b'newline', b'', b'line1\nline2')],
   >     b'hg nohelp',
   >     norepo=True)
   > @command(b'debugoptADV', [(b'', b'aopt', None, b'option is (ADVANCED)')])
   > @command(b'debugoptDEP', [(b'', b'dopt', None, b'option is (DEPRECATED)')])
   > @command(b'debugoptEXP', [(b'', b'eopt', None, b'option is (EXPERIMENTAL)')])
   > def nohelp(ui, *args, **kwargs):
   >     pass
   > 
   > def uisetup(ui):
   >     ui.setconfig(b'alias', b'shellalias', b'!echo hi', b'helpext')
   >     ui.setconfig(b'alias', b'hgalias', b'summary', b'helpext')
   > 
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "helpext = `pwd`/helpext.py" >> $HGRCPATH
 
 Test for aliases
 
   $ hg help hgalias
   hg hgalias [--remote]
   
   alias for: hg summary
   
   summarize working directory state
   
       This generates a brief summary of the working directory state, including
       parents, branch, commit status, phase and available updates.
   
       With the --remote option, this will check the default paths for incoming
       and outgoing changes. This can be time-consuming.
   
       Returns 0 on success.
   
   defined by: helpext
   
   options:
   
     --remote check for push and pull
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help shellalias
   hg shellalias
   
   shell alias for:
   
     echo hi
   
   defined by: helpext
   
   (some details hidden, use --verbose to show complete help)
 
 Test command with no help text
 
   $ hg help nohelp
   hg nohelp
   
   (no help text available)
   
   options:
   
       --longdesc VALUE xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                        xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (default: 3)
    -n --               normal desc
       --newline VALUE  line1 line2
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help -k nohelp
   Commands:
   
    nohelp hg nohelp
   
   Extension Commands:
   
    nohelp (no help text available)
 
 Test that default list of commands omits extension commands
 
   $ hg help
   Mercurial Distributed SCM
   
   list of commands:
   
    add           add the specified files on the next commit
    addremove     add all new files, delete all missing files
    annotate      show changeset information by line for each file
    archive       create an unversioned archive of a repository revision
    backout       reverse effect of earlier changeset
    bisect        subdivision search of changesets
    bookmarks     create a new bookmark or list existing bookmarks
    branch        set or show the current branch name
    branches      list repository named branches
    bundle        create a bundle file
    cat           output the current or given revision of files
    clone         make a copy of an existing repository
    commit        commit the specified files or all outstanding changes
    config        show combined config settings from all hgrc files
    copy          mark files as copied for the next commit
    diff          diff repository (or selected files)
    export        dump the header and diffs for one or more changesets
    files         list tracked files
    forget        forget the specified files on the next commit
    graft         copy changes from other branches onto the current branch
    grep          search revision history for a pattern in specified files
    heads         show branch heads
    help          show help for a given topic or a help overview
    identify      identify the working directory or specified revision
    import        import an ordered set of patches
    incoming      show new changesets found in source
    init          create a new repository in the given directory
    log           show revision history of entire repository or files
    manifest      output the current or given revision of the project manifest
    merge         merge another revision into working directory
    outgoing      show changesets not found in the destination
    paths         show aliases for remote repositories
    phase         set or show the current phase name
    pull          pull changes from the specified source
    push          push changes to the specified destination
    recover       roll back an interrupted transaction
    remove        remove the specified files on the next commit
    rename        rename files; equivalent of copy + remove
    resolve       redo merges or set/view the merge status of files
    revert        restore files to their checkout state
    root          print the root (top) of the current working directory
    serve         start stand-alone webserver
    status        show changed files in the working directory
    summary       summarize working directory state
    tag           add one or more tags for the current or given revision
    tags          list repository tags
    unbundle      apply one or more bundle files
    update        update working directory (or switch revisions)
    verify        verify the integrity of the repository
    version       output version and copyright information
   
   enabled extensions:
   
    helpext       (no help text available)
   
   additional help topics:
   
    bundlespec    Bundle File Formats
    color         Colorizing Outputs
    config        Configuration Files
    dates         Date Formats
    diffs         Diff Formats
    environment   Environment Variables
    extensions    Using Additional Features
    filesets      Specifying File Sets
    glossary      Glossary
    hgignore      Syntax for Mercurial Ignore Files
    hgweb         Configuring hgweb
    internals     Technical implementation topics
    merge-tools   Merge Tools
    pager         Pager Support
    patterns      File Name Patterns
    phases        Working with Phases
    revisions     Specifying Revisions
    scripting     Using Mercurial from scripts and automation
    subrepos      Subrepositories
    templating    Template Usage
    urls          URL Paths
   
   (use 'hg help -v' to show built-in aliases and global options)
 
 
 Test list of internal help commands
 
   $ hg help debug
   debug commands (internal and unsupported):
   
    debugancestor
                  find the ancestor revision of two revisions in a given index
    debugapplystreamclonebundle
                  apply a stream clone bundle file
    debugbuilddag
                  builds a repo with a given DAG from scratch in the current
                  empty repo
    debugbundle   lists the contents of a bundle
    debugcheckstate
                  validate the correctness of the current dirstate
    debugcolor    show available color, effects or style
    debugcommands
                  list all available commands and options
    debugcomplete
                  returns the completion list associated with the given command
    debugcreatestreamclonebundle
                  create a stream clone bundle file
    debugdag      format the changelog or an index DAG as a concise textual
                  description
    debugdata     dump the contents of a data file revision
    debugdate     parse and display a date
    debugdeltachain
                  dump information about delta chains in a revlog
    debugdirstate
                  show the contents of the current dirstate
    debugdiscovery
                  runs the changeset discovery protocol in isolation
    debugextensions
                  show information about active extensions
    debugfileset  parse and apply a fileset specification
    debugfsinfo   show information detected about current filesystem
    debuggetbundle
                  retrieves a bundle from a repo
    debugignore   display the combined ignore pattern and information about
                  ignored files
    debugindex    dump the contents of an index file
    debugindexdot
                  dump an index DAG as a graphviz dot file
    debuginstall  test Mercurial installation
    debugknown    test whether node ids are known to a repo
    debuglocks    show or modify state of locks
    debugmergestate
                  print merge state
    debugnamecomplete
                  complete "names" - tags, open branch names, bookmark names
    debugobsolete
                  create arbitrary obsolete marker
    debugoptADV   (no help text available)
    debugoptDEP   (no help text available)
    debugoptEXP   (no help text available)
    debugpathcomplete
                  complete part or all of a tracked path
    debugpickmergetool
                  examine which merge tool is chosen for specified file
    debugpushkey  access the pushkey key/value protocol
    debugpvec     (no help text available)
    debugrebuilddirstate
                  rebuild the dirstate as it would look like for the given
                  revision
    debugrebuildfncache
                  rebuild the fncache file
    debugrename   dump rename information
    debugrevlog   show data and statistics about a revlog
    debugrevspec  parse and apply a revision specification
    debugsetparents
                  manually set the parents of the current working directory
    debugssl      test a secure connection to a server
    debugsub      (no help text available)
    debugsuccessorssets
                  show set of successors for revision
    debugtemplate
                  parse and apply a template
    debugupdatecaches
                  warm all known caches in the repository
    debugupgraderepo
                  upgrade a repository to use different features
    debugwalk     show how files match on given patterns
    debugwireargs
                  (no help text available)
   
   (use 'hg help -v debug' to show built-in aliases and global options)
 
 internals topic renders index of available sub-topics
 
   $ hg help internals
   Technical implementation topics
   """""""""""""""""""""""""""""""
   
       To access a subtopic, use "hg help internals.{subtopic-name}"
   
        bundles       Bundles
        censor        Censor
        changegroups  Changegroups
        config        Config Register
        requirements  Repository Requirements
        revlogs       Revision Logs
        wireprotocol  Wire Protocol
 
 sub-topics can be accessed
 
   $ hg help internals.changegroups
   Changegroups
   """"""""""""
   
       Changegroups are representations of repository revlog data, specifically
       the changelog data, root/flat manifest data, treemanifest data, and
       filelogs.
   
       There are 3 versions of changegroups: "1", "2", and "3". From a high-
       level, versions "1" and "2" are almost exactly the same, with the only
       difference being an additional item in the *delta header*.  Version "3"
       adds support for revlog flags in the *delta header* and optionally
       exchanging treemanifests (enabled by setting an option on the
       "changegroup" part in the bundle2).
   
       Changegroups when not exchanging treemanifests consist of 3 logical
       segments:
   
         +---------------------------------+
         |           |          |          |
         | changeset | manifest | filelogs |
         |           |          |          |
         |           |          |          |
         +---------------------------------+
   
       When exchanging treemanifests, there are 4 logical segments:
   
         +-------------------------------------------------+
         |           |          |               |          |
         | changeset |   root   | treemanifests | filelogs |
         |           | manifest |               |          |
         |           |          |               |          |
         +-------------------------------------------------+
   
       The principle building block of each segment is a *chunk*. A *chunk* is a
       framed piece of data:
   
         +---------------------------------------+
         |           |                           |
         |  length   |           data            |
         | (4 bytes) |   (<length - 4> bytes)    |
         |           |                           |
         +---------------------------------------+
   
       All integers are big-endian signed integers. Each chunk starts with a
       32-bit integer indicating the length of the entire chunk (including the
       length field itself).
   
       There is a special case chunk that has a value of 0 for the length
       ("0x00000000"). We call this an *empty chunk*.
   
       Delta Groups
       ============
   
       A *delta group* expresses the content of a revlog as a series of deltas,
       or patches against previous revisions.
   
       Delta groups consist of 0 or more *chunks* followed by the *empty chunk*
       to signal the end of the delta group:
   
         +------------------------------------------------------------------------+
         |                |             |               |             |           |
         | chunk0 length  | chunk0 data | chunk1 length | chunk1 data |    0x0    |
         |   (4 bytes)    |  (various)  |   (4 bytes)   |  (various)  | (4 bytes) |
         |                |             |               |             |           |
         +------------------------------------------------------------------------+
   
       Each *chunk*'s data consists of the following:
   
         +---------------------------------------+
         |                        |              |
         |     delta header       |  delta data  |
         |  (various by version)  |  (various)   |
         |                        |              |
         +---------------------------------------+
   
       The *delta data* is a series of *delta*s that describe a diff from an
       existing entry (either that the recipient already has, or previously
       specified in the bundle/changegroup).
   
       The *delta header* is different between versions "1", "2", and "3" of the
       changegroup format.
   
       Version 1 (headerlen=80):
   
         +------------------------------------------------------+
         |            |             |             |             |
         |    node    |   p1 node   |   p2 node   |  link node  |
         | (20 bytes) |  (20 bytes) |  (20 bytes) |  (20 bytes) |
         |            |             |             |             |
         +------------------------------------------------------+
   
       Version 2 (headerlen=100):
   
         +------------------------------------------------------------------+
         |            |             |             |            |            |
         |    node    |   p1 node   |   p2 node   | base node  | link node  |
         | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) |
         |            |             |             |            |            |
         +------------------------------------------------------------------+
   
       Version 3 (headerlen=102):
   
         +------------------------------------------------------------------------------+
         |            |             |             |            |            |           |
         |    node    |   p1 node   |   p2 node   | base node  | link node  |   flags   |
         | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) | (2 bytes) |
         |            |             |             |            |            |           |
         +------------------------------------------------------------------------------+
   
       The *delta data* consists of "chunklen - 4 - headerlen" bytes, which
       contain a series of *delta*s, densely packed (no separators). These deltas
       describe a diff from an existing entry (either that the recipient already
       has, or previously specified in the bundle/changegroup). The format is
       described more fully in "hg help internals.bdiff", but briefly:
   
         +---------------------------------------------------------------+
         |              |            |            |                      |
         | start offset | end offset | new length |        content       |
         |  (4 bytes)   |  (4 bytes) |  (4 bytes) | (<new length> bytes) |
         |              |            |            |                      |
         +---------------------------------------------------------------+
   
       Please note that the length field in the delta data does *not* include
       itself.
   
       In version 1, the delta is always applied against the previous node from
       the changegroup or the first parent if this is the first entry in the
       changegroup.
   
       In version 2 and up, the delta base node is encoded in the entry in the
       changegroup. This allows the delta to be expressed against any parent,
       which can result in smaller deltas and more efficient encoding of data.
   
       Changeset Segment
       =================
   
       The *changeset segment* consists of a single *delta group* holding
       changelog data. The *empty chunk* at the end of the *delta group* denotes
       the boundary to the *manifest segment*.
   
       Manifest Segment
       ================
   
       The *manifest segment* consists of a single *delta group* holding manifest
       data. If treemanifests are in use, it contains only the manifest for the
       root directory of the repository. Otherwise, it contains the entire
       manifest data. The *empty chunk* at the end of the *delta group* denotes
       the boundary to the next segment (either the *treemanifests segment* or
       the *filelogs segment*, depending on version and the request options).
   
       Treemanifests Segment
       ---------------------
   
       The *treemanifests segment* only exists in changegroup version "3", and
       only if the 'treemanifest' param is part of the bundle2 changegroup part
       (it is not possible to use changegroup version 3 outside of bundle2).
       Aside from the filenames in the *treemanifests segment* containing a
       trailing "/" character, it behaves identically to the *filelogs segment*
       (see below). The final sub-segment is followed by an *empty chunk*
       (logically, a sub-segment with filename size 0). This denotes the boundary
       to the *filelogs segment*.
   
       Filelogs Segment
       ================
   
       The *filelogs segment* consists of multiple sub-segments, each
       corresponding to an individual file whose data is being described:
   
         +--------------------------------------------------+
         |          |          |          |     |           |
         | filelog0 | filelog1 | filelog2 | ... |    0x0    |
         |          |          |          |     | (4 bytes) |
         |          |          |          |     |           |
         +--------------------------------------------------+
   
       The final filelog sub-segment is followed by an *empty chunk* (logically,
       a sub-segment with filename size 0). This denotes the end of the segment
       and of the overall changegroup.
   
       Each filelog sub-segment consists of the following:
   
         +------------------------------------------------------+
         |                 |                      |             |
         | filename length |       filename       | delta group |
         |    (4 bytes)    | (<length - 4> bytes) |  (various)  |
         |                 |                      |             |
         +------------------------------------------------------+
   
       That is, a *chunk* consisting of the filename (not terminated or padded)
       followed by N chunks constituting the *delta group* for this file. The
       *empty chunk* at the end of each *delta group* denotes the boundary to the
       next filelog sub-segment.
 
 Test list of commands with command with no help text
 
   $ hg help helpext
   helpext extension - no help text available
   
   list of commands:
   
    nohelp        (no help text available)
   
   (use 'hg help -v helpext' to show built-in aliases and global options)
 
 
 test advanced, deprecated and experimental options are hidden in command help
   $ hg help debugoptADV
   hg debugoptADV
   
   (no help text available)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
   $ hg help debugoptDEP
   hg debugoptDEP
   
   (no help text available)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help debugoptEXP
   hg debugoptEXP
   
   (no help text available)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 
 test advanced, deprecated and experimental options are shown with -v
   $ hg help -v debugoptADV | grep aopt
     --aopt option is (ADVANCED)
   $ hg help -v debugoptDEP | grep dopt
     --dopt option is (DEPRECATED)
   $ hg help -v debugoptEXP | grep eopt
     --eopt option is (EXPERIMENTAL)
 
 #if gettext
 test deprecated option is hidden with translation with untranslated description
 (use many globy for not failing on changed transaction)
   $ LANGUAGE=sv hg help debugoptDEP
   hg debugoptDEP
   
   (*) (glob)
   
   options:
   
   (some details hidden, use --verbose to show complete help)
 #endif
 
 Test commands that collide with topics (issue4240)
 
   $ hg config -hq
   hg config [-u] [NAME]...
   
   show combined config settings from all hgrc files
   $ hg showconfig -hq
   hg config [-u] [NAME]...
   
   show combined config settings from all hgrc files
 
 Test a help topic
 
   $ hg help dates
   Date Formats
   """"""""""""
   
       Some commands allow the user to specify a date, e.g.:
   
       - backout, commit, import, tag: Specify the commit date.
       - log, revert, update: Select revision(s) by date.
   
       Many date formats are valid. Here are some examples:
   
       - "Wed Dec 6 13:18:29 2006" (local timezone assumed)
       - "Dec 6 13:18 -0600" (year assumed, time offset provided)
       - "Dec 6 13:18 UTC" (UTC and GMT are aliases for +0000)
       - "Dec 6" (midnight)
       - "13:18" (today assumed)
       - "3:39" (3:39AM assumed)
       - "3:39pm" (15:39)
       - "2006-12-06 13:18:29" (ISO 8601 format)
       - "2006-12-6 13:18"
       - "2006-12-6"
       - "12-6"
       - "12/6"
       - "12/6/6" (Dec 6 2006)
       - "today" (midnight)
       - "yesterday" (midnight)
       - "now" - right now
   
       Lastly, there is Mercurial's internal format:
   
       - "1165411109 0" (Wed Dec 6 13:18:29 2006 UTC)
   
       This is the internal representation format for dates. The first number is
       the number of seconds since the epoch (1970-01-01 00:00 UTC). The second
       is the offset of the local timezone, in seconds west of UTC (negative if
       the timezone is east of UTC).
   
       The log command also accepts date ranges:
   
       - "<DATE" - at or before a given date/time
       - ">DATE" - on or after a given date/time
       - "DATE to DATE" - a date range, inclusive
       - "-DAYS" - within a given number of days of today
 
 Test repeated config section name
 
   $ hg help config.host
       "http_proxy.host"
           Host name and (optional) port of the proxy server, for example
           "myproxy:8000".
   
       "smtp.host"
           Host name of mail server, e.g. "mail.example.com".
   
 Unrelated trailing paragraphs shouldn't be included
 
   $ hg help config.extramsg | grep '^$'
   
 
 Test capitalized section name
 
   $ hg help scripting.HGPLAIN > /dev/null
 
 Help subsection:
 
   $ hg help config.charsets |grep "Email example:" > /dev/null
   [1]
 
 Show nested definitions
 ("profiling.type"[break]"ls"[break]"stat"[break])
 
   $ hg help config.type | egrep '^$'|wc -l
   \s*3 (re)
 
 Separate sections from subsections
 
   $ hg help config.format | egrep '^    ("|-)|^\s*$' | uniq
       "format"
       --------
   
       "usegeneraldelta"
   
       "dotencode"
   
       "usefncache"
   
       "usestore"
   
       "profiling"
       -----------
   
       "format"
   
       "progress"
       ----------
   
       "format"
   
 
 Last item in help config.*:
 
   $ hg help config.`hg help config|grep '^    "'| \
   >       tail -1|sed 's![ "]*!!g'`| \
   >   grep 'hg help -c config' > /dev/null
   [1]
 
 note to use help -c for general hg help config:
 
   $ hg help config |grep 'hg help -c config' > /dev/null
 
 Test templating help
 
   $ hg help templating | egrep '(desc|diffstat|firstline|nonempty)  '
       desc          String. The text of the changeset description.
       diffstat      String. Statistics of changes with the following format:
       firstline     Any text. Returns the first line of text.
       nonempty      Any text. Returns '(none)' if the string is empty.
 
 Test deprecated items
 
   $ hg help -v templating | grep currentbookmark
       currentbookmark
   $ hg help templating | (grep currentbookmark || true)
 
 Test help hooks
 
   $ cat > helphook1.py <<EOF
   > from mercurial import help
   > 
   > def rewrite(ui, topic, doc):
   >     return doc + '\nhelphook1\n'
   > 
   > def extsetup(ui):
   >     help.addtopichook('revisions', rewrite)
   > EOF
   $ cat > helphook2.py <<EOF
   > from mercurial import help
   > 
   > def rewrite(ui, topic, doc):
   >     return doc + '\nhelphook2\n'
   > 
   > def extsetup(ui):
   >     help.addtopichook('revisions', rewrite)
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "helphook1 = `pwd`/helphook1.py" >> $HGRCPATH
   $ echo "helphook2 = `pwd`/helphook2.py" >> $HGRCPATH
   $ hg help revsets | grep helphook
       helphook1
       helphook2
 
 help -c should only show debug --debug
 
   $ hg help -c --debug|egrep debug|wc -l|egrep '^\s*0\s*$'
   [1]
 
 help -c should only show deprecated for -v
 
   $ hg help -c -v|egrep DEPRECATED|wc -l|egrep '^\s*0\s*$'
   [1]
 
 Test -s / --system
 
   $ hg help config.files -s windows |grep 'etc/mercurial' | \
   > wc -l | sed -e 's/ //g'
   0
   $ hg help config.files --system unix | grep 'USER' | \
   > wc -l | sed -e 's/ //g'
   0
 
 Test -e / -c / -k combinations
 
   $ hg help -c|egrep '^[A-Z].*:|^ debug'
   Commands:
   $ hg help -e|egrep '^[A-Z].*:|^ debug'
   Extensions:
   $ hg help -k|egrep '^[A-Z].*:|^ debug'
   Topics:
   Commands:
   Extensions:
   Extension Commands:
   $ hg help -c schemes
   abort: no such help topic: schemes
   (try 'hg help --keyword schemes')
   [255]
   $ hg help -e schemes |head -1
   schemes extension - extend schemes with shortcuts to repository swarms
   $ hg help -c -k dates |egrep '^(Topics|Extensions|Commands):'
   Commands:
   $ hg help -e -k a |egrep '^(Topics|Extensions|Commands):'
   Extensions:
   $ hg help -e -c -k date |egrep '^(Topics|Extensions|Commands):'
   Extensions:
   Commands:
   $ hg help -c commit > /dev/null
   $ hg help -e -c commit > /dev/null
   $ hg help -e commit > /dev/null
   abort: no such help topic: commit
   (try 'hg help --keyword commit')
   [255]
 
 Test keyword search help
 
   $ cat > prefixedname.py <<EOF
   > '''matched against word "clone"
   > '''
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "dot.dot.prefixedname = `pwd`/prefixedname.py" >> $HGRCPATH
   $ hg help -k clone
   Topics:
   
    config     Configuration Files
    extensions Using Additional Features
    glossary   Glossary
    phases     Working with Phases
    subrepos   Subrepositories
    urls       URL Paths
   
   Commands:
   
    bookmarks create a new bookmark or list existing bookmarks
    clone     make a copy of an existing repository
    paths     show aliases for remote repositories
    update    update working directory (or switch revisions)
   
   Extensions:
   
    clonebundles advertise pre-generated bundles to seed clones
    prefixedname matched against word "clone"
    relink       recreates hardlinks between repository clones
   
   Extension Commands:
   
    qclone clone main and patch repository at same time
 
 Test unfound topic
 
   $ hg help nonexistingtopicthatwillneverexisteverever
   abort: no such help topic: nonexistingtopicthatwillneverexisteverever
   (try 'hg help --keyword nonexistingtopicthatwillneverexisteverever')
   [255]
 
 Test unfound keyword
 
   $ hg help --keyword nonexistingwordthatwillneverexisteverever
   abort: no matches
   (try 'hg help' for a list of topics)
   [255]
 
 Test omit indicating for help
 
   $ cat > addverboseitems.py <<EOF
   > '''extension to test omit indicating.
   > 
   > This paragraph is never omitted (for extension)
   > 
   > .. container:: verbose
   > 
   >   This paragraph is omitted,
   >   if :hg:\`help\` is invoked without \`\`-v\`\` (for extension)
   > 
   > This paragraph is never omitted, too (for extension)
   > '''
   > from __future__ import absolute_import
   > from mercurial import commands, help
   > testtopic = """This paragraph is never omitted (for topic).
   > 
   > .. container:: verbose
   > 
   >   This paragraph is omitted,
   >   if :hg:\`help\` is invoked without \`\`-v\`\` (for topic)
   > 
   > This paragraph is never omitted, too (for topic)
   > """
   > def extsetup(ui):
   >     help.helptable.append((["topic-containing-verbose"],
   >                            "This is the topic to test omit indicating.",
   >                            lambda ui: testtopic))
   > EOF
   $ echo '[extensions]' >> $HGRCPATH
   $ echo "addverboseitems = `pwd`/addverboseitems.py" >> $HGRCPATH
   $ hg help addverboseitems
   addverboseitems extension - extension to test omit indicating.
   
   This paragraph is never omitted (for extension)
   
   This paragraph is never omitted, too (for extension)
   
   (some details hidden, use --verbose to show complete help)
   
   no commands defined
   $ hg help -v addverboseitems
   addverboseitems extension - extension to test omit indicating.
   
   This paragraph is never omitted (for extension)
   
   This paragraph is omitted, if 'hg help' is invoked without "-v" (for
   extension)
   
   This paragraph is never omitted, too (for extension)
   
   no commands defined
   $ hg help topic-containing-verbose
   This is the topic to test omit indicating.
   """"""""""""""""""""""""""""""""""""""""""
   
       This paragraph is never omitted (for topic).
   
       This paragraph is never omitted, too (for topic)
   
   (some details hidden, use --verbose to show complete help)
   $ hg help -v topic-containing-verbose
   This is the topic to test omit indicating.
   """"""""""""""""""""""""""""""""""""""""""
   
       This paragraph is never omitted (for topic).
   
       This paragraph is omitted, if 'hg help' is invoked without "-v" (for
       topic)
   
       This paragraph is never omitted, too (for topic)
 
 Test section lookup
 
   $ hg help revset.merge
       "merge()"
         Changeset is a merge changeset.
   
   $ hg help glossary.dag
       DAG
           The repository of changesets of a distributed version control system
           (DVCS) can be described as a directed acyclic graph (DAG), consisting
           of nodes and edges, where nodes correspond to changesets and edges
           imply a parent -> child relation. This graph can be visualized by
           graphical tools such as 'hg log --graph'. In Mercurial, the DAG is
           limited by the requirement for children to have at most two parents.
   
 
   $ hg help hgrc.paths
       "paths"
       -------
   
       Assigns symbolic names and behavior to repositories.
   
       Options are symbolic names defining the URL or directory that is the
       location of the repository. Example:
   
         [paths]
         my_server = https://example.com/my_repo
         local_path = /home/me/repo
   
       These symbolic names can be used from the command line. To pull from
       "my_server": 'hg pull my_server'. To push to "local_path": 'hg push
       local_path'.
   
       Options containing colons (":") denote sub-options that can influence
       behavior for that specific path. Example:
   
         [paths]
         my_server = https://example.com/my_path
         my_server:pushurl = ssh://example.com/my_path
   
       The following sub-options can be defined:
   
       "pushurl"
          The URL to use for push operations. If not defined, the location
          defined by the path's main entry is used.
   
       "pushrev"
          A revset defining which revisions to push by default.
   
          When 'hg push' is executed without a "-r" argument, the revset defined
          by this sub-option is evaluated to determine what to push.
   
          For example, a value of "." will push the working directory's revision
          by default.
   
          Revsets specifying bookmarks will not result in the bookmark being
          pushed.
   
       The following special named paths exist:
   
       "default"
          The URL or directory to use when no source or remote is specified.
   
          'hg clone' will automatically define this path to the location the
          repository was cloned from.
   
       "default-push"
          (deprecated) The URL or directory for the default 'hg push' location.
          "default:pushurl" should be used instead.
   
   $ hg help glossary.mcguffin
   abort: help section not found: glossary.mcguffin
   [255]
 
   $ hg help glossary.mc.guffin
   abort: help section not found: glossary.mc.guffin
   [255]
 
   $ hg help template.files
       files         List of strings. All files modified, added, or removed by
                     this changeset.
       files(pattern)
                     All files of the current changeset matching the pattern. See
                     'hg help patterns'.
 
 Test section lookup by translated message
 
 str.lower() instead of encoding.lower(str) on translated message might
 make message meaningless, because some encoding uses 0x41(A) - 0x5a(Z)
 as the second or later byte of multi-byte character.
 
 For example, "\x8bL\x98^" (translation of "record" in ja_JP.cp932)
 contains 0x4c (L). str.lower() replaces 0x4c(L) by 0x6c(l) and this
 replacement makes message meaningless.
 
 This tests that section lookup by translated string isn't broken by
 such str.lower().
 
   $ $PYTHON <<EOF
   > def escape(s):
   >     return ''.join('\u%x' % ord(uc) for uc in s.decode('cp932'))
   > # translation of "record" in ja_JP.cp932
   > upper = "\x8bL\x98^"
   > # str.lower()-ed section name should be treated as different one
   > lower = "\x8bl\x98^"
   > with open('ambiguous.py', 'w') as fp:
   >     fp.write("""# ambiguous section names in ja_JP.cp932
   > u'''summary of extension
   > 
   > %s
   > ----
   > 
   > Upper name should show only this message
   > 
   > %s
   > ----
   > 
   > Lower name should show only this message
   > 
   > subsequent section
   > ------------------
   > 
   > This should be hidden at 'hg help ambiguous' with section name.
   > '''
   > """ % (escape(upper), escape(lower)))
   > EOF
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > ambiguous = ./ambiguous.py
   > EOF
 
   $ $PYTHON <<EOF | sh
   > upper = "\x8bL\x98^"
   > print("hg --encoding cp932 help -e ambiguous.%s" % upper)
   > EOF
   \x8bL\x98^ (esc)
   ----
   
   Upper name should show only this message
   
 
   $ $PYTHON <<EOF | sh
   > lower = "\x8bl\x98^"
   > print("hg --encoding cp932 help -e ambiguous.%s" % lower)
   > EOF
   \x8bl\x98^ (esc)
   ----
   
   Lower name should show only this message
   
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > ambiguous = !
   > EOF
 
 Show help content of disabled extensions
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > ambiguous = !./ambiguous.py
   > EOF
   $ hg help -e ambiguous
   ambiguous extension - (no help text available)
   
   (use 'hg help extensions' for information on enabling extensions)
 
 Test dynamic list of merge tools only shows up once
   $ hg help merge-tools
   Merge Tools
   """""""""""
   
       To merge files Mercurial uses merge tools.
   
       A merge tool combines two different versions of a file into a merged file.
       Merge tools are given the two files and the greatest common ancestor of
       the two file versions, so they can determine the changes made on both
       branches.
   
       Merge tools are used both for 'hg resolve', 'hg merge', 'hg update', 'hg
       backout' and in several extensions.
   
       Usually, the merge tool tries to automatically reconcile the files by
       combining all non-overlapping changes that occurred separately in the two
       different evolutions of the same initial base file. Furthermore, some
       interactive merge programs make it easier to manually resolve conflicting
       merges, either in a graphical way, or by inserting some conflict markers.
       Mercurial does not include any interactive merge programs but relies on
       external tools for that.
   
       Available merge tools
       =====================
   
       External merge tools and their properties are configured in the merge-
       tools configuration section - see hgrc(5) - but they can often just be
       named by their executable.
   
       A merge tool is generally usable if its executable can be found on the
       system and if it can handle the merge. The executable is found if it is an
       absolute or relative executable path or the name of an application in the
       executable search path. The tool is assumed to be able to handle the merge
       if it can handle symlinks if the file is a symlink, if it can handle
       binary files if the file is binary, and if a GUI is available if the tool
       requires a GUI.
   
       There are some internal merge tools which can be used. The internal merge
       tools are:
   
       ":dump"
         Creates three versions of the files to merge, containing the contents of
         local, other and base. These files can then be used to perform a merge
         manually. If the file to be merged is named "a.txt", these files will
         accordingly be named "a.txt.local", "a.txt.other" and "a.txt.base" and
         they will be placed in the same directory as "a.txt".
   
         This implies premerge. Therefore, files aren't dumped, if premerge runs
         successfully. Use :forcedump to forcibly write files out.
   
       ":fail"
         Rather than attempting to merge files that were modified on both
         branches, it marks them as unresolved. The resolve command must be used
         to resolve these conflicts.
   
       ":forcedump"
         Creates three versions of the files as same as :dump, but omits
         premerge.
   
       ":local"
         Uses the local 'p1()' version of files as the merged version.
   
       ":merge"
         Uses the internal non-interactive simple merge algorithm for merging
         files. It will fail if there are any conflicts and leave markers in the
         partially merged file. Markers will have two sections, one for each side
         of merge.
   
       ":merge-local"
         Like :merge, but resolve all conflicts non-interactively in favor of the
         local 'p1()' changes.
   
       ":merge-other"
         Like :merge, but resolve all conflicts non-interactively in favor of the
         other 'p2()' changes.
   
       ":merge3"
         Uses the internal non-interactive simple merge algorithm for merging
         files. It will fail if there are any conflicts and leave markers in the
         partially merged file. Marker will have three sections, one from each
         side of the merge and one for the base content.
   
       ":other"
         Uses the other 'p2()' version of files as the merged version.
   
       ":prompt"
         Asks the user which of the local 'p1()' or the other 'p2()' version to
         keep as the merged version.
   
       ":tagmerge"
         Uses the internal tag merge algorithm (experimental).
   
       ":union"
         Uses the internal non-interactive simple merge algorithm for merging
         files. It will use both left and right sides for conflict regions. No
         markers are inserted.
   
       Internal tools are always available and do not require a GUI but will by
       default not handle symlinks or binary files.
   
       Choosing a merge tool
       =====================
   
       Mercurial uses these rules when deciding which merge tool to use:
   
       1. If a tool has been specified with the --tool option to merge or
          resolve, it is used.  If it is the name of a tool in the merge-tools
          configuration, its configuration is used. Otherwise the specified tool
          must be executable by the shell.
       2. If the "HGMERGE" environment variable is present, its value is used and
          must be executable by the shell.
       3. If the filename of the file to be merged matches any of the patterns in
          the merge-patterns configuration section, the first usable merge tool
          corresponding to a matching pattern is used. Here, binary capabilities
          of the merge tool are not considered.
       4. If ui.merge is set it will be considered next. If the value is not the
          name of a configured tool, the specified value is used and must be
          executable by the shell. Otherwise the named tool is used if it is
          usable.
       5. If any usable merge tools are present in the merge-tools configuration
          section, the one with the highest priority is used.
       6. If a program named "hgmerge" can be found on the system, it is used -
          but it will by default not be used for symlinks and binary files.
       7. If the file to be merged is not binary and is not a symlink, then
          internal ":merge" is used.
       8. Otherwise, ":prompt" is used.
   
       Note:
          After selecting a merge program, Mercurial will by default attempt to
          merge the files using a simple merge algorithm first. Only if it
-         doesn't succeed because of conflicting changes Mercurial will actually
+         doesn't succeed because of conflicting changes will Mercurial actually
          execute the merge program. Whether to use the simple merge algorithm
          first can be controlled by the premerge setting of the merge tool.
          Premerge is enabled by default unless the file is binary or a symlink.
   
       See the merge-tools and ui sections of hgrc(5) for details on the
       configuration of merge tools.
 
 Compression engines listed in `hg help bundlespec`
 
   $ hg help bundlespec | grep gzip
           "v1" bundles can only use the "gzip", "bzip2", and "none" compression
         An algorithm that produces smaller bundles than "gzip".
         This engine will likely produce smaller bundles than "gzip" but will be
       "gzip"
         better compression than "gzip". It also frequently yields better (?)
 
 Test usage of section marks in help documents
 
   $ cd "$TESTDIR"/../doc
   $ $PYTHON check-seclevel.py
   $ cd $TESTTMP
 
 #if serve
 
 Test the help pages in hgweb.
 
 Dish up an empty repo; serve it cold.
 
   $ hg init "$TESTTMP/test"
   $ hg serve -R "$TESTTMP/test" -n test -p $HGPORT -d --pid-file=hg.pid
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: Index</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
   <li class="active">help</li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <table class="bigtable">
   <tr><td colspan="2"><h2><a name="topics" href="#topics">Topics</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/bundlespec">
   bundlespec
   </a>
   </td><td>
   Bundle File Formats
   </td></tr>
   <tr><td>
   <a href="/help/color">
   color
   </a>
   </td><td>
   Colorizing Outputs
   </td></tr>
   <tr><td>
   <a href="/help/config">
   config
   </a>
   </td><td>
   Configuration Files
   </td></tr>
   <tr><td>
   <a href="/help/dates">
   dates
   </a>
   </td><td>
   Date Formats
   </td></tr>
   <tr><td>
   <a href="/help/diffs">
   diffs
   </a>
   </td><td>
   Diff Formats
   </td></tr>
   <tr><td>
   <a href="/help/environment">
   environment
   </a>
   </td><td>
   Environment Variables
   </td></tr>
   <tr><td>
   <a href="/help/extensions">
   extensions
   </a>
   </td><td>
   Using Additional Features
   </td></tr>
   <tr><td>
   <a href="/help/filesets">
   filesets
   </a>
   </td><td>
   Specifying File Sets
   </td></tr>
   <tr><td>
   <a href="/help/glossary">
   glossary
   </a>
   </td><td>
   Glossary
   </td></tr>
   <tr><td>
   <a href="/help/hgignore">
   hgignore
   </a>
   </td><td>
   Syntax for Mercurial Ignore Files
   </td></tr>
   <tr><td>
   <a href="/help/hgweb">
   hgweb
   </a>
   </td><td>
   Configuring hgweb
   </td></tr>
   <tr><td>
   <a href="/help/internals">
   internals
   </a>
   </td><td>
   Technical implementation topics
   </td></tr>
   <tr><td>
   <a href="/help/merge-tools">
   merge-tools
   </a>
   </td><td>
   Merge Tools
   </td></tr>
   <tr><td>
   <a href="/help/pager">
   pager
   </a>
   </td><td>
   Pager Support
   </td></tr>
   <tr><td>
   <a href="/help/patterns">
   patterns
   </a>
   </td><td>
   File Name Patterns
   </td></tr>
   <tr><td>
   <a href="/help/phases">
   phases
   </a>
   </td><td>
   Working with Phases
   </td></tr>
   <tr><td>
   <a href="/help/revisions">
   revisions
   </a>
   </td><td>
   Specifying Revisions
   </td></tr>
   <tr><td>
   <a href="/help/scripting">
   scripting
   </a>
   </td><td>
   Using Mercurial from scripts and automation
   </td></tr>
   <tr><td>
   <a href="/help/subrepos">
   subrepos
   </a>
   </td><td>
   Subrepositories
   </td></tr>
   <tr><td>
   <a href="/help/templating">
   templating
   </a>
   </td><td>
   Template Usage
   </td></tr>
   <tr><td>
   <a href="/help/urls">
   urls
   </a>
   </td><td>
   URL Paths
   </td></tr>
   <tr><td>
   <a href="/help/topic-containing-verbose">
   topic-containing-verbose
   </a>
   </td><td>
   This is the topic to test omit indicating.
   </td></tr>
   
   
   <tr><td colspan="2"><h2><a name="main" href="#main">Main Commands</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/add">
   add
   </a>
   </td><td>
   add the specified files on the next commit
   </td></tr>
   <tr><td>
   <a href="/help/annotate">
   annotate
   </a>
   </td><td>
   show changeset information by line for each file
   </td></tr>
   <tr><td>
   <a href="/help/clone">
   clone
   </a>
   </td><td>
   make a copy of an existing repository
   </td></tr>
   <tr><td>
   <a href="/help/commit">
   commit
   </a>
   </td><td>
   commit the specified files or all outstanding changes
   </td></tr>
   <tr><td>
   <a href="/help/diff">
   diff
   </a>
   </td><td>
   diff repository (or selected files)
   </td></tr>
   <tr><td>
   <a href="/help/export">
   export
   </a>
   </td><td>
   dump the header and diffs for one or more changesets
   </td></tr>
   <tr><td>
   <a href="/help/forget">
   forget
   </a>
   </td><td>
   forget the specified files on the next commit
   </td></tr>
   <tr><td>
   <a href="/help/init">
   init
   </a>
   </td><td>
   create a new repository in the given directory
   </td></tr>
   <tr><td>
   <a href="/help/log">
   log
   </a>
   </td><td>
   show revision history of entire repository or files
   </td></tr>
   <tr><td>
   <a href="/help/merge">
   merge
   </a>
   </td><td>
   merge another revision into working directory
   </td></tr>
   <tr><td>
   <a href="/help/pull">
   pull
   </a>
   </td><td>
   pull changes from the specified source
   </td></tr>
   <tr><td>
   <a href="/help/push">
   push
   </a>
   </td><td>
   push changes to the specified destination
   </td></tr>
   <tr><td>
   <a href="/help/remove">
   remove
   </a>
   </td><td>
   remove the specified files on the next commit
   </td></tr>
   <tr><td>
   <a href="/help/serve">
   serve
   </a>
   </td><td>
   start stand-alone webserver
   </td></tr>
   <tr><td>
   <a href="/help/status">
   status
   </a>
   </td><td>
   show changed files in the working directory
   </td></tr>
   <tr><td>
   <a href="/help/summary">
   summary
   </a>
   </td><td>
   summarize working directory state
   </td></tr>
   <tr><td>
   <a href="/help/update">
   update
   </a>
   </td><td>
   update working directory (or switch revisions)
   </td></tr>
   
   
   
   <tr><td colspan="2"><h2><a name="other" href="#other">Other Commands</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/addremove">
   addremove
   </a>
   </td><td>
   add all new files, delete all missing files
   </td></tr>
   <tr><td>
   <a href="/help/archive">
   archive
   </a>
   </td><td>
   create an unversioned archive of a repository revision
   </td></tr>
   <tr><td>
   <a href="/help/backout">
   backout
   </a>
   </td><td>
   reverse effect of earlier changeset
   </td></tr>
   <tr><td>
   <a href="/help/bisect">
   bisect
   </a>
   </td><td>
   subdivision search of changesets
   </td></tr>
   <tr><td>
   <a href="/help/bookmarks">
   bookmarks
   </a>
   </td><td>
   create a new bookmark or list existing bookmarks
   </td></tr>
   <tr><td>
   <a href="/help/branch">
   branch
   </a>
   </td><td>
   set or show the current branch name
   </td></tr>
   <tr><td>
   <a href="/help/branches">
   branches
   </a>
   </td><td>
   list repository named branches
   </td></tr>
   <tr><td>
   <a href="/help/bundle">
   bundle
   </a>
   </td><td>
   create a bundle file
   </td></tr>
   <tr><td>
   <a href="/help/cat">
   cat
   </a>
   </td><td>
   output the current or given revision of files
   </td></tr>
   <tr><td>
   <a href="/help/config">
   config
   </a>
   </td><td>
   show combined config settings from all hgrc files
   </td></tr>
   <tr><td>
   <a href="/help/copy">
   copy
   </a>
   </td><td>
   mark files as copied for the next commit
   </td></tr>
   <tr><td>
   <a href="/help/files">
   files
   </a>
   </td><td>
   list tracked files
   </td></tr>
   <tr><td>
   <a href="/help/graft">
   graft
   </a>
   </td><td>
   copy changes from other branches onto the current branch
   </td></tr>
   <tr><td>
   <a href="/help/grep">
   grep
   </a>
   </td><td>
   search revision history for a pattern in specified files
   </td></tr>
   <tr><td>
   <a href="/help/heads">
   heads
   </a>
   </td><td>
   show branch heads
   </td></tr>
   <tr><td>
   <a href="/help/help">
   help
   </a>
   </td><td>
   show help for a given topic or a help overview
   </td></tr>
   <tr><td>
   <a href="/help/hgalias">
   hgalias
   </a>
   </td><td>
   summarize working directory state
   </td></tr>
   <tr><td>
   <a href="/help/identify">
   identify
   </a>
   </td><td>
   identify the working directory or specified revision
   </td></tr>
   <tr><td>
   <a href="/help/import">
   import
   </a>
   </td><td>
   import an ordered set of patches
   </td></tr>
   <tr><td>
   <a href="/help/incoming">
   incoming
   </a>
   </td><td>
   show new changesets found in source
   </td></tr>
   <tr><td>
   <a href="/help/manifest">
   manifest
   </a>
   </td><td>
   output the current or given revision of the project manifest
   </td></tr>
   <tr><td>
   <a href="/help/nohelp">
   nohelp
   </a>
   </td><td>
   (no help text available)
   </td></tr>
   <tr><td>
   <a href="/help/outgoing">
   outgoing
   </a>
   </td><td>
   show changesets not found in the destination
   </td></tr>
   <tr><td>
   <a href="/help/paths">
   paths
   </a>
   </td><td>
   show aliases for remote repositories
   </td></tr>
   <tr><td>
   <a href="/help/phase">
   phase
   </a>
   </td><td>
   set or show the current phase name
   </td></tr>
   <tr><td>
   <a href="/help/recover">
   recover
   </a>
   </td><td>
   roll back an interrupted transaction
   </td></tr>
   <tr><td>
   <a href="/help/rename">
   rename
   </a>
   </td><td>
   rename files; equivalent of copy + remove
   </td></tr>
   <tr><td>
   <a href="/help/resolve">
   resolve
   </a>
   </td><td>
   redo merges or set/view the merge status of files
   </td></tr>
   <tr><td>
   <a href="/help/revert">
   revert
   </a>
   </td><td>
   restore files to their checkout state
   </td></tr>
   <tr><td>
   <a href="/help/root">
   root
   </a>
   </td><td>
   print the root (top) of the current working directory
   </td></tr>
   <tr><td>
   <a href="/help/shellalias">
   shellalias
   </a>
   </td><td>
   (no help text available)
   </td></tr>
   <tr><td>
   <a href="/help/tag">
   tag
   </a>
   </td><td>
   add one or more tags for the current or given revision
   </td></tr>
   <tr><td>
   <a href="/help/tags">
   tags
   </a>
   </td><td>
   list repository tags
   </td></tr>
   <tr><td>
   <a href="/help/unbundle">
   unbundle
   </a>
   </td><td>
   apply one or more bundle files
   </td></tr>
   <tr><td>
   <a href="/help/verify">
   verify
   </a>
   </td><td>
   verify the integrity of the repository
   </td></tr>
   <tr><td>
   <a href="/help/version">
   version
   </a>
   </td><td>
   output version and copyright information
   </td></tr>
   
   
   </table>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/add"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: add</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: add</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <p>
   hg add [OPTION]... [FILE]...
   </p>
   <p>
   add the specified files on the next commit
   </p>
   <p>
   Schedule files to be version controlled and added to the
   repository.
   </p>
   <p>
   The files will be added to the repository at the next commit. To
   undo an add before that, see 'hg forget'.
   </p>
   <p>
   If no names are given, add all files to the repository (except
   files matching &quot;.hgignore&quot;).
   </p>
   <p>
   Examples:
   </p>
   <ul>
    <li> New (unknown) files are added   automatically by 'hg add':
   <pre>
   \$ ls (re)
   foo.c
   \$ hg status (re)
   ? foo.c
   \$ hg add (re)
   adding foo.c
   \$ hg status (re)
   A foo.c
   </pre>
    <li> Specific files to be added can be specified:
   <pre>
   \$ ls (re)
   bar.c  foo.c
   \$ hg status (re)
   ? bar.c
   ? foo.c
   \$ hg add bar.c (re)
   \$ hg status (re)
   A bar.c
   ? foo.c
   </pre>
   </ul>
   <p>
   Returns 0 if all files are successfully added.
   </p>
   <p>
   options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-I</td>
   <td>--include PATTERN [+]</td>
   <td>include names matching the given patterns</td></tr>
   <tr><td>-X</td>
   <td>--exclude PATTERN [+]</td>
   <td>exclude names matching the given patterns</td></tr>
   <tr><td>-S</td>
   <td>--subrepos</td>
   <td>recurse into subrepositories</td></tr>
   <tr><td>-n</td>
   <td>--dry-run</td>
   <td>do not perform actions, just print output</td></tr>
   </table>
   <p>
   global options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-R</td>
   <td>--repository REPO</td>
   <td>repository root directory or name of overlay bundle file</td></tr>
   <tr><td></td>
   <td>--cwd DIR</td>
   <td>change working directory</td></tr>
   <tr><td>-y</td>
   <td>--noninteractive</td>
   <td>do not prompt, automatically pick the first choice for all prompts</td></tr>
   <tr><td>-q</td>
   <td>--quiet</td>
   <td>suppress output</td></tr>
   <tr><td>-v</td>
   <td>--verbose</td>
   <td>enable additional output</td></tr>
   <tr><td></td>
   <td>--color TYPE</td>
   <td>when to colorize (boolean, always, auto, never, or debug)</td></tr>
   <tr><td></td>
   <td>--config CONFIG [+]</td>
   <td>set/override config option (use 'section.name=value')</td></tr>
   <tr><td></td>
   <td>--debug</td>
   <td>enable debugging output</td></tr>
   <tr><td></td>
   <td>--debugger</td>
   <td>start debugger</td></tr>
   <tr><td></td>
   <td>--encoding ENCODE</td>
   <td>set the charset encoding (default: ascii)</td></tr>
   <tr><td></td>
   <td>--encodingmode MODE</td>
   <td>set the charset encoding mode (default: strict)</td></tr>
   <tr><td></td>
   <td>--traceback</td>
   <td>always print a traceback on exception</td></tr>
   <tr><td></td>
   <td>--time</td>
   <td>time how long the command takes</td></tr>
   <tr><td></td>
   <td>--profile</td>
   <td>print command execution profile</td></tr>
   <tr><td></td>
   <td>--version</td>
   <td>output version information and exit</td></tr>
   <tr><td>-h</td>
   <td>--help</td>
   <td>display help and exit</td></tr>
   <tr><td></td>
   <td>--hidden</td>
   <td>consider hidden changesets</td></tr>
   <tr><td></td>
   <td>--pager TYPE</td>
   <td>when to paginate (boolean, always, auto, or never) (default: auto)</td></tr>
   </table>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/remove"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: remove</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: remove</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <p>
   hg remove [OPTION]... FILE...
   </p>
   <p>
   aliases: rm
   </p>
   <p>
   remove the specified files on the next commit
   </p>
   <p>
   Schedule the indicated files for removal from the current branch.
   </p>
   <p>
   This command schedules the files to be removed at the next commit.
   To undo a remove before that, see 'hg revert'. To undo added
   files, see 'hg forget'.
   </p>
   <p>
   -A/--after can be used to remove only files that have already
   been deleted, -f/--force can be used to force deletion, and -Af
   can be used to remove files from the next revision without
   deleting them from the working directory.
   </p>
   <p>
   The following table details the behavior of remove for different
   file states (columns) and option combinations (rows). The file
   states are Added [A], Clean [C], Modified [M] and Missing [!]
   (as reported by 'hg status'). The actions are Warn, Remove
   (from branch) and Delete (from disk):
   </p>
   <table>
   <tr><td>opt/state</td>
   <td>A</td>
   <td>C</td>
   <td>M</td>
   <td>!</td></tr>
   <tr><td>none</td>
   <td>W</td>
   <td>RD</td>
   <td>W</td>
   <td>R</td></tr>
   <tr><td>-f</td>
   <td>R</td>
   <td>RD</td>
   <td>RD</td>
   <td>R</td></tr>
   <tr><td>-A</td>
   <td>W</td>
   <td>W</td>
   <td>W</td>
   <td>R</td></tr>
   <tr><td>-Af</td>
   <td>R</td>
   <td>R</td>
   <td>R</td>
   <td>R</td></tr>
   </table>
   <p>
   <b>Note:</b> 
   </p>
   <p>
   'hg remove' never deletes files in Added [A] state from the
   working directory, not even if &quot;--force&quot; is specified.
   </p>
   <p>
   Returns 0 on success, 1 if any warnings encountered.
   </p>
   <p>
   options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-A</td>
   <td>--after</td>
   <td>record delete for missing files</td></tr>
   <tr><td>-f</td>
   <td>--force</td>
   <td>forget added files, delete modified files</td></tr>
   <tr><td>-S</td>
   <td>--subrepos</td>
   <td>recurse into subrepositories</td></tr>
   <tr><td>-I</td>
   <td>--include PATTERN [+]</td>
   <td>include names matching the given patterns</td></tr>
   <tr><td>-X</td>
   <td>--exclude PATTERN [+]</td>
   <td>exclude names matching the given patterns</td></tr>
   </table>
   <p>
   global options ([+] can be repeated):
   </p>
   <table>
   <tr><td>-R</td>
   <td>--repository REPO</td>
   <td>repository root directory or name of overlay bundle file</td></tr>
   <tr><td></td>
   <td>--cwd DIR</td>
   <td>change working directory</td></tr>
   <tr><td>-y</td>
   <td>--noninteractive</td>
   <td>do not prompt, automatically pick the first choice for all prompts</td></tr>
   <tr><td>-q</td>
   <td>--quiet</td>
   <td>suppress output</td></tr>
   <tr><td>-v</td>
   <td>--verbose</td>
   <td>enable additional output</td></tr>
   <tr><td></td>
   <td>--color TYPE</td>
   <td>when to colorize (boolean, always, auto, never, or debug)</td></tr>
   <tr><td></td>
   <td>--config CONFIG [+]</td>
   <td>set/override config option (use 'section.name=value')</td></tr>
   <tr><td></td>
   <td>--debug</td>
   <td>enable debugging output</td></tr>
   <tr><td></td>
   <td>--debugger</td>
   <td>start debugger</td></tr>
   <tr><td></td>
   <td>--encoding ENCODE</td>
   <td>set the charset encoding (default: ascii)</td></tr>
   <tr><td></td>
   <td>--encodingmode MODE</td>
   <td>set the charset encoding mode (default: strict)</td></tr>
   <tr><td></td>
   <td>--traceback</td>
   <td>always print a traceback on exception</td></tr>
   <tr><td></td>
   <td>--time</td>
   <td>time how long the command takes</td></tr>
   <tr><td></td>
   <td>--profile</td>
   <td>print command execution profile</td></tr>
   <tr><td></td>
   <td>--version</td>
   <td>output version information and exit</td></tr>
   <tr><td>-h</td>
   <td>--help</td>
   <td>display help and exit</td></tr>
   <tr><td></td>
   <td>--hidden</td>
   <td>consider hidden changesets</td></tr>
   <tr><td></td>
   <td>--pager TYPE</td>
   <td>when to paginate (boolean, always, auto, or never) (default: auto)</td></tr>
   </table>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/dates"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: dates</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: dates</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <h1>Date Formats</h1>
   <p>
   Some commands allow the user to specify a date, e.g.:
   </p>
   <ul>
    <li> backout, commit, import, tag: Specify the commit date.
    <li> log, revert, update: Select revision(s) by date.
   </ul>
   <p>
   Many date formats are valid. Here are some examples:
   </p>
   <ul>
    <li> &quot;Wed Dec 6 13:18:29 2006&quot; (local timezone assumed)
    <li> &quot;Dec 6 13:18 -0600&quot; (year assumed, time offset provided)
    <li> &quot;Dec 6 13:18 UTC&quot; (UTC and GMT are aliases for +0000)
    <li> &quot;Dec 6&quot; (midnight)
    <li> &quot;13:18&quot; (today assumed)
    <li> &quot;3:39&quot; (3:39AM assumed)
    <li> &quot;3:39pm&quot; (15:39)
    <li> &quot;2006-12-06 13:18:29&quot; (ISO 8601 format)
    <li> &quot;2006-12-6 13:18&quot;
    <li> &quot;2006-12-6&quot;
    <li> &quot;12-6&quot;
    <li> &quot;12/6&quot;
    <li> &quot;12/6/6&quot; (Dec 6 2006)
    <li> &quot;today&quot; (midnight)
    <li> &quot;yesterday&quot; (midnight)
    <li> &quot;now&quot; - right now
   </ul>
   <p>
   Lastly, there is Mercurial's internal format:
   </p>
   <ul>
    <li> &quot;1165411109 0&quot; (Wed Dec 6 13:18:29 2006 UTC)
   </ul>
   <p>
   This is the internal representation format for dates. The first number
   is the number of seconds since the epoch (1970-01-01 00:00 UTC). The
   second is the offset of the local timezone, in seconds west of UTC
   (negative if the timezone is east of UTC).
   </p>
   <p>
   The log command also accepts date ranges:
   </p>
   <ul>
    <li> &quot;&lt;DATE&quot; - at or before a given date/time
    <li> &quot;&gt;DATE&quot; - on or after a given date/time
    <li> &quot;DATE to DATE&quot; - a date range, inclusive
    <li> &quot;-DAYS&quot; - within a given number of days of today
   </ul>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
 Sub-topic indexes rendered properly
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/internals"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: internals</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
   <li><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <table class="bigtable">
   <tr><td colspan="2"><h2><a name="topics" href="#topics">Topics</a></h2></td></tr>
   
   <tr><td>
   <a href="/help/internals.bundles">
   bundles
   </a>
   </td><td>
   Bundles
   </td></tr>
   <tr><td>
   <a href="/help/internals.censor">
   censor
   </a>
   </td><td>
   Censor
   </td></tr>
   <tr><td>
   <a href="/help/internals.changegroups">
   changegroups
   </a>
   </td><td>
   Changegroups
   </td></tr>
   <tr><td>
   <a href="/help/internals.config">
   config
   </a>
   </td><td>
   Config Register
   </td></tr>
   <tr><td>
   <a href="/help/internals.requirements">
   requirements
   </a>
   </td><td>
   Repository Requirements
   </td></tr>
   <tr><td>
   <a href="/help/internals.revlogs">
   revlogs
   </a>
   </td><td>
   Revision Logs
   </td></tr>
   <tr><td>
   <a href="/help/internals.wireprotocol">
   wireprotocol
   </a>
   </td><td>
   Wire Protocol
   </td></tr>
   
   
   
   
   
   </table>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
 Sub-topic topics rendered properly
 
   $ get-with-headers.py $LOCALIP:$HGPORT "help/internals.changegroups"
   200 Script output follows
   
   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
   <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US">
   <head>
   <link rel="icon" href="/static/hgicon.png" type="image/png" />
   <meta name="robots" content="index, nofollow" />
   <link rel="stylesheet" href="/static/style-paper.css" type="text/css" />
   <script type="text/javascript" src="/static/mercurial.js"></script>
   
   <title>Help: internals.changegroups</title>
   </head>
   <body>
   
   <div class="container">
   <div class="menu">
   <div class="logo">
   <a href="https://mercurial-scm.org/">
   <img src="/static/hglogo.png" alt="mercurial" /></a>
   </div>
   <ul>
   <li><a href="/shortlog">log</a></li>
   <li><a href="/graph">graph</a></li>
   <li><a href="/tags">tags</a></li>
   <li><a href="/bookmarks">bookmarks</a></li>
   <li><a href="/branches">branches</a></li>
   </ul>
   <ul>
    <li class="active"><a href="/help">help</a></li>
   </ul>
   </div>
   
   <div class="main">
   <h2 class="breadcrumb"><a href="/">Mercurial</a> </h2>
   <h3>Help: internals.changegroups</h3>
   
   <form class="search" action="/log">
   
   <p><input name="rev" id="search1" type="text" size="30" value="" /></p>
   <div id="hint">Find changesets by keywords (author, files, the commit message), revision
   number or hash, or <a href="/help/revsets">revset expression</a>.</div>
   </form>
   <div id="doc">
   <h1>Changegroups</h1>
   <p>
   Changegroups are representations of repository revlog data, specifically
   the changelog data, root/flat manifest data, treemanifest data, and
   filelogs.
   </p>
   <p>
   There are 3 versions of changegroups: &quot;1&quot;, &quot;2&quot;, and &quot;3&quot;. From a
   high-level, versions &quot;1&quot; and &quot;2&quot; are almost exactly the same, with the
   only difference being an additional item in the *delta header*.  Version
   &quot;3&quot; adds support for revlog flags in the *delta header* and optionally
   exchanging treemanifests (enabled by setting an option on the
   &quot;changegroup&quot; part in the bundle2).
   </p>
   <p>
   Changegroups when not exchanging treemanifests consist of 3 logical
   segments:
   </p>
   <pre>
   +---------------------------------+
   |           |          |          |
   | changeset | manifest | filelogs |
   |           |          |          |
   |           |          |          |
   +---------------------------------+
   </pre>
   <p>
   When exchanging treemanifests, there are 4 logical segments:
   </p>
   <pre>
   +-------------------------------------------------+
   |           |          |               |          |
   | changeset |   root   | treemanifests | filelogs |
   |           | manifest |               |          |
   |           |          |               |          |
   +-------------------------------------------------+
   </pre>
   <p>
   The principle building block of each segment is a *chunk*. A *chunk*
   is a framed piece of data:
   </p>
   <pre>
   +---------------------------------------+
   |           |                           |
   |  length   |           data            |
   | (4 bytes) |   (&lt;length - 4&gt; bytes)    |
   |           |                           |
   +---------------------------------------+
   </pre>
   <p>
   All integers are big-endian signed integers. Each chunk starts with a 32-bit
   integer indicating the length of the entire chunk (including the length field
   itself).
   </p>
   <p>
   There is a special case chunk that has a value of 0 for the length
   (&quot;0x00000000&quot;). We call this an *empty chunk*.
   </p>
   <h2>Delta Groups</h2>
   <p>
   A *delta group* expresses the content of a revlog as a series of deltas,
   or patches against previous revisions.
   </p>
   <p>
   Delta groups consist of 0 or more *chunks* followed by the *empty chunk*
   to signal the end of the delta group:
   </p>
   <pre>
   +------------------------------------------------------------------------+
   |                |             |               |             |           |
   | chunk0 length  | chunk0 data | chunk1 length | chunk1 data |    0x0    |
   |   (4 bytes)    |  (various)  |   (4 bytes)   |  (various)  | (4 bytes) |
   |                |             |               |             |           |
   +------------------------------------------------------------------------+
   </pre>
   <p>
   Each *chunk*'s data consists of the following:
   </p>
   <pre>
   +---------------------------------------+
   |                        |              |
   |     delta header       |  delta data  |
   |  (various by version)  |  (various)   |
   |                        |              |
   +---------------------------------------+
   </pre>
   <p>
   The *delta data* is a series of *delta*s that describe a diff from an existing
   entry (either that the recipient already has, or previously specified in the
   bundle/changegroup).
   </p>
   <p>
   The *delta header* is different between versions &quot;1&quot;, &quot;2&quot;, and
   &quot;3&quot; of the changegroup format.
   </p>
   <p>
   Version 1 (headerlen=80):
   </p>
   <pre>
   +------------------------------------------------------+
   |            |             |             |             |
   |    node    |   p1 node   |   p2 node   |  link node  |
   | (20 bytes) |  (20 bytes) |  (20 bytes) |  (20 bytes) |
   |            |             |             |             |
   +------------------------------------------------------+
   </pre>
   <p>
   Version 2 (headerlen=100):
   </p>
   <pre>
   +------------------------------------------------------------------+
   |            |             |             |            |            |
   |    node    |   p1 node   |   p2 node   | base node  | link node  |
   | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) |
   |            |             |             |            |            |
   +------------------------------------------------------------------+
   </pre>
   <p>
   Version 3 (headerlen=102):
   </p>
   <pre>
   +------------------------------------------------------------------------------+
   |            |             |             |            |            |           |
   |    node    |   p1 node   |   p2 node   | base node  | link node  |   flags   |
   | (20 bytes) |  (20 bytes) |  (20 bytes) | (20 bytes) | (20 bytes) | (2 bytes) |
   |            |             |             |            |            |           |
   +------------------------------------------------------------------------------+
   </pre>
   <p>
   The *delta data* consists of &quot;chunklen - 4 - headerlen&quot; bytes, which contain a
   series of *delta*s, densely packed (no separators). These deltas describe a diff
   from an existing entry (either that the recipient already has, or previously
   specified in the bundle/changegroup). The format is described more fully in
   &quot;hg help internals.bdiff&quot;, but briefly:
   </p>
   <pre>
   +---------------------------------------------------------------+
   |              |            |            |                      |
   | start offset | end offset | new length |        content       |
   |  (4 bytes)   |  (4 bytes) |  (4 bytes) | (&lt;new length&gt; bytes) |
   |              |            |            |                      |
   +---------------------------------------------------------------+
   </pre>
   <p>
   Please note that the length field in the delta data does *not* include itself.
   </p>
   <p>
   In version 1, the delta is always applied against the previous node from
   the changegroup or the first parent if this is the first entry in the
   changegroup.
   </p>
   <p>
   In version 2 and up, the delta base node is encoded in the entry in the
   changegroup. This allows the delta to be expressed against any parent,
   which can result in smaller deltas and more efficient encoding of data.
   </p>
   <h2>Changeset Segment</h2>
   <p>
   The *changeset segment* consists of a single *delta group* holding
   changelog data. The *empty chunk* at the end of the *delta group* denotes
   the boundary to the *manifest segment*.
   </p>
   <h2>Manifest Segment</h2>
   <p>
   The *manifest segment* consists of a single *delta group* holding manifest
   data. If treemanifests are in use, it contains only the manifest for the
   root directory of the repository. Otherwise, it contains the entire
   manifest data. The *empty chunk* at the end of the *delta group* denotes
   the boundary to the next segment (either the *treemanifests segment* or the
   *filelogs segment*, depending on version and the request options).
   </p>
   <h3>Treemanifests Segment</h3>
   <p>
   The *treemanifests segment* only exists in changegroup version &quot;3&quot;, and
   only if the 'treemanifest' param is part of the bundle2 changegroup part
   (it is not possible to use changegroup version 3 outside of bundle2).
   Aside from the filenames in the *treemanifests segment* containing a
   trailing &quot;/&quot; character, it behaves identically to the *filelogs segment*
   (see below). The final sub-segment is followed by an *empty chunk* (logically,
   a sub-segment with filename size 0). This denotes the boundary to the
   *filelogs segment*.
   </p>
   <h2>Filelogs Segment</h2>
   <p>
   The *filelogs segment* consists of multiple sub-segments, each
   corresponding to an individual file whose data is being described:
   </p>
   <pre>
   +--------------------------------------------------+
   |          |          |          |     |           |
   | filelog0 | filelog1 | filelog2 | ... |    0x0    |
   |          |          |          |     | (4 bytes) |
   |          |          |          |     |           |
   +--------------------------------------------------+
   </pre>
   <p>
   The final filelog sub-segment is followed by an *empty chunk* (logically,
   a sub-segment with filename size 0). This denotes the end of the segment
   and of the overall changegroup.
   </p>
   <p>
   Each filelog sub-segment consists of the following:
   </p>
   <pre>
   +------------------------------------------------------+
   |                 |                      |             |
   | filename length |       filename       | delta group |
   |    (4 bytes)    | (&lt;length - 4&gt; bytes) |  (various)  |
   |                 |                      |             |
   +------------------------------------------------------+
   </pre>
   <p>
   That is, a *chunk* consisting of the filename (not terminated or padded)
   followed by N chunks constituting the *delta group* for this file. The
   *empty chunk* at the end of each *delta group* denotes the boundary to the
   next filelog sub-segment.
   </p>
   
   </div>
   </div>
   </div>
   
   
   
   </body>
   </html>
   
 
   $ killdaemons.py
 
 #endif